IoTEvents

Table of Contents

Client

class IoTEvents.Client

A low-level client representing AWS IoT Events:

import boto3

client = boto3.client('iotevents')

These are the available methods:

can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
create_detector_model(**kwargs)

Creates a detector model.

See also: AWS API Documentation

Request Syntax

response = client.create_detector_model(
    detectorModelName='string',
    detectorModelDefinition={
        'states': [
            {
                'stateName': 'string',
                'onInput': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ],
                    'transitionEvents': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ],
                            'nextState': 'string'
                        },
                    ]
                },
                'onEnter': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ]
                },
                'onExit': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ]
                }
            },
        ],
        'initialStateName': 'string'
    },
    detectorModelDescription='string',
    key='string',
    roleArn='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ],
    evaluationMethod='BATCH'|'SERIAL'
)
Parameters
  • detectorModelName (string) --

    [REQUIRED]

    The name of the detector model.

  • detectorModelDefinition (dict) --

    [REQUIRED]

    Information that defines how the detectors operate.

    • states (list) -- [REQUIRED]

      Information about the states of the detector.

      • (dict) --

        Information that defines a state of a detector.

        • stateName (string) -- [REQUIRED]

          The name of the state.

        • onInput (dict) --

          When an input is received and the "condition" is TRUE, perform the specified "actions" .

          • events (list) --

            Specifies the actions performed when the "condition" evaluates to TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

          • transitionEvents (list) --

            Specifies the actions performed, and the next state entered, when a "condition" evaluates to TRUE.

            • (dict) --

              Specifies the actions performed and the next state entered when a "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the transition event.

              • condition (string) -- [REQUIRED]

                [Required] A Boolean expression that when TRUE causes the actions to be performed and the "nextState" to be entered.

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

              • nextState (string) -- [REQUIRED]

                The next state to enter.

        • onEnter (dict) --

          When entering this state, perform these "actions" if the "condition" is TRUE.

          • events (list) --

            Specifies the actions that are performed when the state is entered and the "condition" is TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

        • onExit (dict) --

          When exiting this state, perform these "actions" if the specified "condition" is TRUE.

          • events (list) --

            Specifies the "actions" that are performed when the state is exited and the "condition" is TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

    • initialStateName (string) -- [REQUIRED]

      The state that is entered at the creation of each detector (instance).

  • detectorModelDescription (string) -- A brief description of the detector model.
  • key (string) -- The input attribute key used to identify a device or system to create a detector (an instance of the detector model) and then to route each input received to the appropriate detector (instance). This parameter uses a JSON-path expression to specify the attribute-value pair in the message payload of each input that is used to identify the device associated with the input.
  • roleArn (string) --

    [REQUIRED]

    The ARN of the role that grants permission to AWS IoT Events to perform its operations.

  • tags (list) --

    Metadata that can be used to manage the detector model.

    • (dict) --

      Metadata that can be used to manage the resource.

      • key (string) -- [REQUIRED]

        The tag's key.

      • value (string) -- [REQUIRED]

        The tag's value.

  • evaluationMethod (string) -- When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.
Return type

dict

Returns

Response Syntax

{
    'detectorModelConfiguration': {
        'detectorModelName': 'string',
        'detectorModelVersion': 'string',
        'detectorModelDescription': 'string',
        'detectorModelArn': 'string',
        'roleArn': 'string',
        'creationTime': datetime(2015, 1, 1),
        'lastUpdateTime': datetime(2015, 1, 1),
        'status': 'ACTIVE'|'ACTIVATING'|'INACTIVE'|'DEPRECATED'|'DRAFT'|'PAUSED'|'FAILED',
        'key': 'string',
        'evaluationMethod': 'BATCH'|'SERIAL'
    }
}

Response Structure

  • (dict) --

    • detectorModelConfiguration (dict) --

      Information about how the detector model is configured.

      • detectorModelName (string) --

        The name of the detector model.

      • detectorModelVersion (string) --

        The version of the detector model.

      • detectorModelDescription (string) --

        A brief description of the detector model.

      • detectorModelArn (string) --

        The ARN of the detector model.

      • roleArn (string) --

        The ARN of the role that grants permission to AWS IoT Events to perform its operations.

      • creationTime (datetime) --

        The time the detector model was created.

      • lastUpdateTime (datetime) --

        The time the detector model was last updated.

      • status (string) --

        The status of the detector model.

      • key (string) --

        The input attribute key used to identify a device or system to create a detector (an instance of the detector model) and then to route each input received to the appropriate detector (instance). This parameter uses a JSON-path expression to specify the attribute-value pair in the message payload of each input that is used to identify the device associated with the input.

      • evaluationMethod (string) --

        When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.

create_input(**kwargs)

Creates an input.

See also: AWS API Documentation

Request Syntax

response = client.create_input(
    inputName='string',
    inputDescription='string',
    inputDefinition={
        'attributes': [
            {
                'jsonPath': 'string'
            },
        ]
    },
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)
Parameters
  • inputName (string) --

    [REQUIRED]

    The name you want to give to the input.

  • inputDescription (string) -- A brief description of the input.
  • inputDefinition (dict) --

    [REQUIRED]

    The definition of the input.

    • attributes (list) -- [REQUIRED]

      The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the "condition" expressions used by detectors that monitor this input.

      • (dict) --

        The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the condition expressions used by detectors.

        • jsonPath (string) -- [REQUIRED]

          An expression that specifies an attribute-value pair in a JSON structure. Use this to specify an attribute from the JSON payload that is made available by the input. Inputs are derived from messages sent to the AWS IoT Events system (BatchPutMessage ). Each such message contains a JSON payload, and the attribute (and its paired value) specified here are available for use in the "condition" expressions used by detectors.

          Syntax: <field-name>.<field-name>...

  • tags (list) --

    Metadata that can be used to manage the input.

    • (dict) --

      Metadata that can be used to manage the resource.

      • key (string) -- [REQUIRED]

        The tag's key.

      • value (string) -- [REQUIRED]

        The tag's value.

Return type

dict

Returns

Response Syntax

{
    'inputConfiguration': {
        'inputName': 'string',
        'inputDescription': 'string',
        'inputArn': 'string',
        'creationTime': datetime(2015, 1, 1),
        'lastUpdateTime': datetime(2015, 1, 1),
        'status': 'CREATING'|'UPDATING'|'ACTIVE'|'DELETING'
    }
}

Response Structure

  • (dict) --

    • inputConfiguration (dict) --

      Information about the configuration of the input.

      • inputName (string) --

        The name of the input.

      • inputDescription (string) --

        A brief description of the input.

      • inputArn (string) --

        The ARN of the input.

      • creationTime (datetime) --

        The time the input was created.

      • lastUpdateTime (datetime) --

        The last time the input was updated.

      • status (string) --

        The status of the input.

delete_detector_model(**kwargs)

Deletes a detector model. Any active instances of the detector model are also deleted.

See also: AWS API Documentation

Request Syntax

response = client.delete_detector_model(
    detectorModelName='string'
)
Parameters
detectorModelName (string) --

[REQUIRED]

The name of the detector model to be deleted.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --
delete_input(**kwargs)

Deletes an input.

See also: AWS API Documentation

Request Syntax

response = client.delete_input(
    inputName='string'
)
Parameters
inputName (string) --

[REQUIRED]

The name of the input to delete.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --
describe_detector_model(**kwargs)

Describes a detector model. If the "version" parameter is not specified, information about the latest version is returned.

See also: AWS API Documentation

Request Syntax

response = client.describe_detector_model(
    detectorModelName='string',
    detectorModelVersion='string'
)
Parameters
  • detectorModelName (string) --

    [REQUIRED]

    The name of the detector model.

  • detectorModelVersion (string) -- The version of the detector model.
Return type

dict

Returns

Response Syntax

{
    'detectorModel': {
        'detectorModelDefinition': {
            'states': [
                {
                    'stateName': 'string',
                    'onInput': {
                        'events': [
                            {
                                'eventName': 'string',
                                'condition': 'string',
                                'actions': [
                                    {
                                        'setVariable': {
                                            'variableName': 'string',
                                            'value': 'string'
                                        },
                                        'sns': {
                                            'targetArn': 'string'
                                        },
                                        'iotTopicPublish': {
                                            'mqttTopic': 'string'
                                        },
                                        'setTimer': {
                                            'timerName': 'string',
                                            'seconds': 123
                                        },
                                        'clearTimer': {
                                            'timerName': 'string'
                                        },
                                        'resetTimer': {
                                            'timerName': 'string'
                                        },
                                        'lambda': {
                                            'functionArn': 'string'
                                        },
                                        'iotEvents': {
                                            'inputName': 'string'
                                        },
                                        'sqs': {
                                            'queueUrl': 'string',
                                            'useBase64': True|False
                                        },
                                        'firehose': {
                                            'deliveryStreamName': 'string',
                                            'separator': 'string'
                                        }
                                    },
                                ]
                            },
                        ],
                        'transitionEvents': [
                            {
                                'eventName': 'string',
                                'condition': 'string',
                                'actions': [
                                    {
                                        'setVariable': {
                                            'variableName': 'string',
                                            'value': 'string'
                                        },
                                        'sns': {
                                            'targetArn': 'string'
                                        },
                                        'iotTopicPublish': {
                                            'mqttTopic': 'string'
                                        },
                                        'setTimer': {
                                            'timerName': 'string',
                                            'seconds': 123
                                        },
                                        'clearTimer': {
                                            'timerName': 'string'
                                        },
                                        'resetTimer': {
                                            'timerName': 'string'
                                        },
                                        'lambda': {
                                            'functionArn': 'string'
                                        },
                                        'iotEvents': {
                                            'inputName': 'string'
                                        },
                                        'sqs': {
                                            'queueUrl': 'string',
                                            'useBase64': True|False
                                        },
                                        'firehose': {
                                            'deliveryStreamName': 'string',
                                            'separator': 'string'
                                        }
                                    },
                                ],
                                'nextState': 'string'
                            },
                        ]
                    },
                    'onEnter': {
                        'events': [
                            {
                                'eventName': 'string',
                                'condition': 'string',
                                'actions': [
                                    {
                                        'setVariable': {
                                            'variableName': 'string',
                                            'value': 'string'
                                        },
                                        'sns': {
                                            'targetArn': 'string'
                                        },
                                        'iotTopicPublish': {
                                            'mqttTopic': 'string'
                                        },
                                        'setTimer': {
                                            'timerName': 'string',
                                            'seconds': 123
                                        },
                                        'clearTimer': {
                                            'timerName': 'string'
                                        },
                                        'resetTimer': {
                                            'timerName': 'string'
                                        },
                                        'lambda': {
                                            'functionArn': 'string'
                                        },
                                        'iotEvents': {
                                            'inputName': 'string'
                                        },
                                        'sqs': {
                                            'queueUrl': 'string',
                                            'useBase64': True|False
                                        },
                                        'firehose': {
                                            'deliveryStreamName': 'string',
                                            'separator': 'string'
                                        }
                                    },
                                ]
                            },
                        ]
                    },
                    'onExit': {
                        'events': [
                            {
                                'eventName': 'string',
                                'condition': 'string',
                                'actions': [
                                    {
                                        'setVariable': {
                                            'variableName': 'string',
                                            'value': 'string'
                                        },
                                        'sns': {
                                            'targetArn': 'string'
                                        },
                                        'iotTopicPublish': {
                                            'mqttTopic': 'string'
                                        },
                                        'setTimer': {
                                            'timerName': 'string',
                                            'seconds': 123
                                        },
                                        'clearTimer': {
                                            'timerName': 'string'
                                        },
                                        'resetTimer': {
                                            'timerName': 'string'
                                        },
                                        'lambda': {
                                            'functionArn': 'string'
                                        },
                                        'iotEvents': {
                                            'inputName': 'string'
                                        },
                                        'sqs': {
                                            'queueUrl': 'string',
                                            'useBase64': True|False
                                        },
                                        'firehose': {
                                            'deliveryStreamName': 'string',
                                            'separator': 'string'
                                        }
                                    },
                                ]
                            },
                        ]
                    }
                },
            ],
            'initialStateName': 'string'
        },
        'detectorModelConfiguration': {
            'detectorModelName': 'string',
            'detectorModelVersion': 'string',
            'detectorModelDescription': 'string',
            'detectorModelArn': 'string',
            'roleArn': 'string',
            'creationTime': datetime(2015, 1, 1),
            'lastUpdateTime': datetime(2015, 1, 1),
            'status': 'ACTIVE'|'ACTIVATING'|'INACTIVE'|'DEPRECATED'|'DRAFT'|'PAUSED'|'FAILED',
            'key': 'string',
            'evaluationMethod': 'BATCH'|'SERIAL'
        }
    }
}

Response Structure

  • (dict) --

    • detectorModel (dict) --

      Information about the detector model.

      • detectorModelDefinition (dict) --

        Information that defines how a detector operates.

        • states (list) --

          Information about the states of the detector.

          • (dict) --

            Information that defines a state of a detector.

            • stateName (string) --

              The name of the state.

            • onInput (dict) --

              When an input is received and the "condition" is TRUE, perform the specified "actions" .

              • events (list) --

                Specifies the actions performed when the "condition" evaluates to TRUE.

                • (dict) --

                  Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

                  • eventName (string) --

                    The name of the event.

                  • condition (string) --

                    [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

                  • actions (list) --

                    The actions to be performed.

                    • (dict) --

                      An action to be performed when the "condition" is TRUE.

                      • setVariable (dict) --

                        Sets a variable to a specified value.

                        • variableName (string) --

                          The name of the variable.

                        • value (string) --

                          The new value of the variable.

                      • sns (dict) --

                        Sends an Amazon SNS message.

                        • targetArn (string) --

                          The ARN of the Amazon SNS target where the message is sent.

                      • iotTopicPublish (dict) --

                        Publishes an MQTT message with the given topic to the AWS IoT message broker.

                        • mqttTopic (string) --

                          The MQTT topic of the message.

                      • setTimer (dict) --

                        Information needed to set the timer.

                        • timerName (string) --

                          The name of the timer.

                        • seconds (integer) --

                          The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                      • clearTimer (dict) --

                        Information needed to clear the timer.

                        • timerName (string) --

                          The name of the timer to clear.

                      • resetTimer (dict) --

                        Information needed to reset the timer.

                        • timerName (string) --

                          The name of the timer to reset.

                      • lambda (dict) --

                        Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                        • functionArn (string) --

                          The ARN of the AWS Lambda function which is executed.

                      • iotEvents (dict) --

                        Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                        • inputName (string) --

                          The name of the AWS IoT Events input where the data is sent.

                      • sqs (dict) --

                        Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                        • queueUrl (string) --

                          The URL of the Amazon SQS queue where the data is written.

                        • useBase64 (boolean) --

                          Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                      • firehose (dict) --

                        Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                        • deliveryStreamName (string) --

                          The name of the Kinesis Data Firehose delivery stream where the data is written.

                        • separator (string) --

                          A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

              • transitionEvents (list) --

                Specifies the actions performed, and the next state entered, when a "condition" evaluates to TRUE.

                • (dict) --

                  Specifies the actions performed and the next state entered when a "condition" evaluates to TRUE.

                  • eventName (string) --

                    The name of the transition event.

                  • condition (string) --

                    [Required] A Boolean expression that when TRUE causes the actions to be performed and the "nextState" to be entered.

                  • actions (list) --

                    The actions to be performed.

                    • (dict) --

                      An action to be performed when the "condition" is TRUE.

                      • setVariable (dict) --

                        Sets a variable to a specified value.

                        • variableName (string) --

                          The name of the variable.

                        • value (string) --

                          The new value of the variable.

                      • sns (dict) --

                        Sends an Amazon SNS message.

                        • targetArn (string) --

                          The ARN of the Amazon SNS target where the message is sent.

                      • iotTopicPublish (dict) --

                        Publishes an MQTT message with the given topic to the AWS IoT message broker.

                        • mqttTopic (string) --

                          The MQTT topic of the message.

                      • setTimer (dict) --

                        Information needed to set the timer.

                        • timerName (string) --

                          The name of the timer.

                        • seconds (integer) --

                          The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                      • clearTimer (dict) --

                        Information needed to clear the timer.

                        • timerName (string) --

                          The name of the timer to clear.

                      • resetTimer (dict) --

                        Information needed to reset the timer.

                        • timerName (string) --

                          The name of the timer to reset.

                      • lambda (dict) --

                        Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                        • functionArn (string) --

                          The ARN of the AWS Lambda function which is executed.

                      • iotEvents (dict) --

                        Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                        • inputName (string) --

                          The name of the AWS IoT Events input where the data is sent.

                      • sqs (dict) --

                        Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                        • queueUrl (string) --

                          The URL of the Amazon SQS queue where the data is written.

                        • useBase64 (boolean) --

                          Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                      • firehose (dict) --

                        Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                        • deliveryStreamName (string) --

                          The name of the Kinesis Data Firehose delivery stream where the data is written.

                        • separator (string) --

                          A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

                  • nextState (string) --

                    The next state to enter.

            • onEnter (dict) --

              When entering this state, perform these "actions" if the "condition" is TRUE.

              • events (list) --

                Specifies the actions that are performed when the state is entered and the "condition" is TRUE.

                • (dict) --

                  Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

                  • eventName (string) --

                    The name of the event.

                  • condition (string) --

                    [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

                  • actions (list) --

                    The actions to be performed.

                    • (dict) --

                      An action to be performed when the "condition" is TRUE.

                      • setVariable (dict) --

                        Sets a variable to a specified value.

                        • variableName (string) --

                          The name of the variable.

                        • value (string) --

                          The new value of the variable.

                      • sns (dict) --

                        Sends an Amazon SNS message.

                        • targetArn (string) --

                          The ARN of the Amazon SNS target where the message is sent.

                      • iotTopicPublish (dict) --

                        Publishes an MQTT message with the given topic to the AWS IoT message broker.

                        • mqttTopic (string) --

                          The MQTT topic of the message.

                      • setTimer (dict) --

                        Information needed to set the timer.

                        • timerName (string) --

                          The name of the timer.

                        • seconds (integer) --

                          The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                      • clearTimer (dict) --

                        Information needed to clear the timer.

                        • timerName (string) --

                          The name of the timer to clear.

                      • resetTimer (dict) --

                        Information needed to reset the timer.

                        • timerName (string) --

                          The name of the timer to reset.

                      • lambda (dict) --

                        Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                        • functionArn (string) --

                          The ARN of the AWS Lambda function which is executed.

                      • iotEvents (dict) --

                        Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                        • inputName (string) --

                          The name of the AWS IoT Events input where the data is sent.

                      • sqs (dict) --

                        Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                        • queueUrl (string) --

                          The URL of the Amazon SQS queue where the data is written.

                        • useBase64 (boolean) --

                          Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                      • firehose (dict) --

                        Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                        • deliveryStreamName (string) --

                          The name of the Kinesis Data Firehose delivery stream where the data is written.

                        • separator (string) --

                          A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

            • onExit (dict) --

              When exiting this state, perform these "actions" if the specified "condition" is TRUE.

              • events (list) --

                Specifies the "actions" that are performed when the state is exited and the "condition" is TRUE.

                • (dict) --

                  Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

                  • eventName (string) --

                    The name of the event.

                  • condition (string) --

                    [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

                  • actions (list) --

                    The actions to be performed.

                    • (dict) --

                      An action to be performed when the "condition" is TRUE.

                      • setVariable (dict) --

                        Sets a variable to a specified value.

                        • variableName (string) --

                          The name of the variable.

                        • value (string) --

                          The new value of the variable.

                      • sns (dict) --

                        Sends an Amazon SNS message.

                        • targetArn (string) --

                          The ARN of the Amazon SNS target where the message is sent.

                      • iotTopicPublish (dict) --

                        Publishes an MQTT message with the given topic to the AWS IoT message broker.

                        • mqttTopic (string) --

                          The MQTT topic of the message.

                      • setTimer (dict) --

                        Information needed to set the timer.

                        • timerName (string) --

                          The name of the timer.

                        • seconds (integer) --

                          The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                      • clearTimer (dict) --

                        Information needed to clear the timer.

                        • timerName (string) --

                          The name of the timer to clear.

                      • resetTimer (dict) --

                        Information needed to reset the timer.

                        • timerName (string) --

                          The name of the timer to reset.

                      • lambda (dict) --

                        Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                        • functionArn (string) --

                          The ARN of the AWS Lambda function which is executed.

                      • iotEvents (dict) --

                        Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                        • inputName (string) --

                          The name of the AWS IoT Events input where the data is sent.

                      • sqs (dict) --

                        Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                        • queueUrl (string) --

                          The URL of the Amazon SQS queue where the data is written.

                        • useBase64 (boolean) --

                          Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                      • firehose (dict) --

                        Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                        • deliveryStreamName (string) --

                          The name of the Kinesis Data Firehose delivery stream where the data is written.

                        • separator (string) --

                          A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

        • initialStateName (string) --

          The state that is entered at the creation of each detector (instance).

      • detectorModelConfiguration (dict) --

        Information about how the detector is configured.

        • detectorModelName (string) --

          The name of the detector model.

        • detectorModelVersion (string) --

          The version of the detector model.

        • detectorModelDescription (string) --

          A brief description of the detector model.

        • detectorModelArn (string) --

          The ARN of the detector model.

        • roleArn (string) --

          The ARN of the role that grants permission to AWS IoT Events to perform its operations.

        • creationTime (datetime) --

          The time the detector model was created.

        • lastUpdateTime (datetime) --

          The time the detector model was last updated.

        • status (string) --

          The status of the detector model.

        • key (string) --

          The input attribute key used to identify a device or system to create a detector (an instance of the detector model) and then to route each input received to the appropriate detector (instance). This parameter uses a JSON-path expression to specify the attribute-value pair in the message payload of each input that is used to identify the device associated with the input.

        • evaluationMethod (string) --

          When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.

describe_input(**kwargs)

Describes an input.

See also: AWS API Documentation

Request Syntax

response = client.describe_input(
    inputName='string'
)
Parameters
inputName (string) --

[REQUIRED]

The name of the input.

Return type
dict
Returns
Response Syntax
{
    'input': {
        'inputConfiguration': {
            'inputName': 'string',
            'inputDescription': 'string',
            'inputArn': 'string',
            'creationTime': datetime(2015, 1, 1),
            'lastUpdateTime': datetime(2015, 1, 1),
            'status': 'CREATING'|'UPDATING'|'ACTIVE'|'DELETING'
        },
        'inputDefinition': {
            'attributes': [
                {
                    'jsonPath': 'string'
                },
            ]
        }
    }
}

Response Structure

  • (dict) --
    • input (dict) --

      Information about the input.

      • inputConfiguration (dict) --

        Information about the configuration of an input.

        • inputName (string) --

          The name of the input.

        • inputDescription (string) --

          A brief description of the input.

        • inputArn (string) --

          The ARN of the input.

        • creationTime (datetime) --

          The time the input was created.

        • lastUpdateTime (datetime) --

          The last time the input was updated.

        • status (string) --

          The status of the input.

      • inputDefinition (dict) --

        The definition of the input.

        • attributes (list) --

          The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the "condition" expressions used by detectors that monitor this input.

          • (dict) --

            The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the condition expressions used by detectors.

            • jsonPath (string) --

              An expression that specifies an attribute-value pair in a JSON structure. Use this to specify an attribute from the JSON payload that is made available by the input. Inputs are derived from messages sent to the AWS IoT Events system (BatchPutMessage ). Each such message contains a JSON payload, and the attribute (and its paired value) specified here are available for use in the "condition" expressions used by detectors.

              Syntax: <field-name>.<field-name>...

describe_logging_options()

Retrieves the current settings of the AWS IoT Events logging options.

See also: AWS API Documentation

Request Syntax

response = client.describe_logging_options()
Return type
dict
Returns
Response Syntax
{
    'loggingOptions': {
        'roleArn': 'string',
        'level': 'ERROR'|'INFO'|'DEBUG',
        'enabled': True|False,
        'detectorDebugOptions': [
            {
                'detectorModelName': 'string',
                'keyValue': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --
    • loggingOptions (dict) --

      The current settings of the AWS IoT Events logging options.

      • roleArn (string) --

        The ARN of the role that grants permission to AWS IoT Events to perform logging.

      • level (string) --

        The logging level.

      • enabled (boolean) --

        If TRUE, logging is enabled for AWS IoT Events.

      • detectorDebugOptions (list) --

        Information that identifies those detector models and their detectors (instances) for which the logging level is given.

        • (dict) --

          The detector model and the specific detectors (instances) for which the logging level is given.

          • detectorModelName (string) --

            The name of the detector model.

          • keyValue (string) --

            The value of the input attribute key used to create the detector (the instance of the detector model).

generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_detector_model_versions(**kwargs)

Lists all the versions of a detector model. Only the metadata associated with each detector model version is returned.

See also: AWS API Documentation

Request Syntax

response = client.list_detector_model_versions(
    detectorModelName='string',
    nextToken='string',
    maxResults=123
)
Parameters
  • detectorModelName (string) --

    [REQUIRED]

    The name of the detector model whose versions are returned.

  • nextToken (string) -- The token for the next set of results.
  • maxResults (integer) -- The maximum number of results to return at one time.
Return type

dict

Returns

Response Syntax

{
    'detectorModelVersionSummaries': [
        {
            'detectorModelName': 'string',
            'detectorModelVersion': 'string',
            'detectorModelArn': 'string',
            'roleArn': 'string',
            'creationTime': datetime(2015, 1, 1),
            'lastUpdateTime': datetime(2015, 1, 1),
            'status': 'ACTIVE'|'ACTIVATING'|'INACTIVE'|'DEPRECATED'|'DRAFT'|'PAUSED'|'FAILED',
            'evaluationMethod': 'BATCH'|'SERIAL'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • detectorModelVersionSummaries (list) --

      Summary information about the detector model versions.

      • (dict) --

        Information about the detector model version.

        • detectorModelName (string) --

          The name of the detector model.

        • detectorModelVersion (string) --

          The ID of the detector model version.

        • detectorModelArn (string) --

          The ARN of the detector model version.

        • roleArn (string) --

          The ARN of the role that grants the detector model permission to perform its tasks.

        • creationTime (datetime) --

          The time the detector model version was created.

        • lastUpdateTime (datetime) --

          The last time the detector model version was updated.

        • status (string) --

          The status of the detector model version.

        • evaluationMethod (string) --

          When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.

    • nextToken (string) --

      A token to retrieve the next set of results, or null if there are no additional results.

list_detector_models(**kwargs)

Lists the detector models you have created. Only the metadata associated with each detector model is returned.

See also: AWS API Documentation

Request Syntax

response = client.list_detector_models(
    nextToken='string',
    maxResults=123
)
Parameters
  • nextToken (string) -- The token for the next set of results.
  • maxResults (integer) -- The maximum number of results to return at one time.
Return type

dict

Returns

Response Syntax

{
    'detectorModelSummaries': [
        {
            'detectorModelName': 'string',
            'detectorModelDescription': 'string',
            'creationTime': datetime(2015, 1, 1)
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • detectorModelSummaries (list) --

      Summary information about the detector models.

      • (dict) --

        Information about the detector model.

        • detectorModelName (string) --

          The name of the detector model.

        • detectorModelDescription (string) --

          A brief description of the detector model.

        • creationTime (datetime) --

          The time the detector model was created.

    • nextToken (string) --

      A token to retrieve the next set of results, or null if there are no additional results.

list_inputs(**kwargs)

Lists the inputs you have created.

See also: AWS API Documentation

Request Syntax

response = client.list_inputs(
    nextToken='string',
    maxResults=123
)
Parameters
  • nextToken (string) -- The token for the next set of results.
  • maxResults (integer) -- The maximum number of results to return at one time.
Return type

dict

Returns

Response Syntax

{
    'inputSummaries': [
        {
            'inputName': 'string',
            'inputDescription': 'string',
            'inputArn': 'string',
            'creationTime': datetime(2015, 1, 1),
            'lastUpdateTime': datetime(2015, 1, 1),
            'status': 'CREATING'|'UPDATING'|'ACTIVE'|'DELETING'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • inputSummaries (list) --

      Summary information about the inputs.

      • (dict) --

        Information about the input.

        • inputName (string) --

          The name of the input.

        • inputDescription (string) --

          A brief description of the input.

        • inputArn (string) --

          The ARN of the input.

        • creationTime (datetime) --

          The time the input was created.

        • lastUpdateTime (datetime) --

          The last time the input was updated.

        • status (string) --

          The status of the input.

    • nextToken (string) --

      A token to retrieve the next set of results, or null if there are no additional results.

list_tags_for_resource(**kwargs)

Lists the tags (metadata) you have assigned to the resource.

See also: AWS API Documentation

Request Syntax

response = client.list_tags_for_resource(
    resourceArn='string'
)
Parameters
resourceArn (string) --

[REQUIRED]

The ARN of the resource.

Return type
dict
Returns
Response Syntax
{
    'tags': [
        {
            'key': 'string',
            'value': 'string'
        },
    ]
}

Response Structure

  • (dict) --
    • tags (list) --

      The list of tags assigned to the resource.

      • (dict) --

        Metadata that can be used to manage the resource.

        • key (string) --

          The tag's key.

        • value (string) --

          The tag's value.

put_logging_options(**kwargs)

Sets or updates the AWS IoT Events logging options.

If you update the value of any "loggingOptions" field, it takes up to one minute for the change to take effect. Also, if you change the policy attached to the role you specified in the "roleArn" field (for example, to correct an invalid policy) it takes up to five minutes for that change to take effect.

See also: AWS API Documentation

Request Syntax

response = client.put_logging_options(
    loggingOptions={
        'roleArn': 'string',
        'level': 'ERROR'|'INFO'|'DEBUG',
        'enabled': True|False,
        'detectorDebugOptions': [
            {
                'detectorModelName': 'string',
                'keyValue': 'string'
            },
        ]
    }
)
Parameters
loggingOptions (dict) --

[REQUIRED]

The new values of the AWS IoT Events logging options.

  • roleArn (string) -- [REQUIRED]

    The ARN of the role that grants permission to AWS IoT Events to perform logging.

  • level (string) -- [REQUIRED]

    The logging level.

  • enabled (boolean) -- [REQUIRED]

    If TRUE, logging is enabled for AWS IoT Events.

  • detectorDebugOptions (list) --

    Information that identifies those detector models and their detectors (instances) for which the logging level is given.

    • (dict) --

      The detector model and the specific detectors (instances) for which the logging level is given.

      • detectorModelName (string) -- [REQUIRED]

        The name of the detector model.

      • keyValue (string) --

        The value of the input attribute key used to create the detector (the instance of the detector model).

Returns
None
tag_resource(**kwargs)

Adds to or modifies the tags of the given resource. Tags are metadata that can be used to manage a resource.

See also: AWS API Documentation

Request Syntax

response = client.tag_resource(
    resourceArn='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)
Parameters
  • resourceArn (string) --

    [REQUIRED]

    The ARN of the resource.

  • tags (list) --

    [REQUIRED]

    The new or modified tags for the resource.

    • (dict) --

      Metadata that can be used to manage the resource.

      • key (string) -- [REQUIRED]

        The tag's key.

      • value (string) -- [REQUIRED]

        The tag's value.

Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

untag_resource(**kwargs)

Removes the given tags (metadata) from the resource.

See also: AWS API Documentation

Request Syntax

response = client.untag_resource(
    resourceArn='string',
    tagKeys=[
        'string',
    ]
)
Parameters
  • resourceArn (string) --

    [REQUIRED]

    The ARN of the resource.

  • tagKeys (list) --

    [REQUIRED]

    A list of the keys of the tags to be removed from the resource.

    • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

update_detector_model(**kwargs)

Updates a detector model. Detectors (instances) spawned by the previous version are deleted and then re-created as new inputs arrive.

See also: AWS API Documentation

Request Syntax

response = client.update_detector_model(
    detectorModelName='string',
    detectorModelDefinition={
        'states': [
            {
                'stateName': 'string',
                'onInput': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ],
                    'transitionEvents': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ],
                            'nextState': 'string'
                        },
                    ]
                },
                'onEnter': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ]
                },
                'onExit': {
                    'events': [
                        {
                            'eventName': 'string',
                            'condition': 'string',
                            'actions': [
                                {
                                    'setVariable': {
                                        'variableName': 'string',
                                        'value': 'string'
                                    },
                                    'sns': {
                                        'targetArn': 'string'
                                    },
                                    'iotTopicPublish': {
                                        'mqttTopic': 'string'
                                    },
                                    'setTimer': {
                                        'timerName': 'string',
                                        'seconds': 123
                                    },
                                    'clearTimer': {
                                        'timerName': 'string'
                                    },
                                    'resetTimer': {
                                        'timerName': 'string'
                                    },
                                    'lambda': {
                                        'functionArn': 'string'
                                    },
                                    'iotEvents': {
                                        'inputName': 'string'
                                    },
                                    'sqs': {
                                        'queueUrl': 'string',
                                        'useBase64': True|False
                                    },
                                    'firehose': {
                                        'deliveryStreamName': 'string',
                                        'separator': 'string'
                                    }
                                },
                            ]
                        },
                    ]
                }
            },
        ],
        'initialStateName': 'string'
    },
    detectorModelDescription='string',
    roleArn='string',
    evaluationMethod='BATCH'|'SERIAL'
)
Parameters
  • detectorModelName (string) --

    [REQUIRED]

    The name of the detector model that is updated.

  • detectorModelDefinition (dict) --

    [REQUIRED]

    Information that defines how a detector operates.

    • states (list) -- [REQUIRED]

      Information about the states of the detector.

      • (dict) --

        Information that defines a state of a detector.

        • stateName (string) -- [REQUIRED]

          The name of the state.

        • onInput (dict) --

          When an input is received and the "condition" is TRUE, perform the specified "actions" .

          • events (list) --

            Specifies the actions performed when the "condition" evaluates to TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

          • transitionEvents (list) --

            Specifies the actions performed, and the next state entered, when a "condition" evaluates to TRUE.

            • (dict) --

              Specifies the actions performed and the next state entered when a "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the transition event.

              • condition (string) -- [REQUIRED]

                [Required] A Boolean expression that when TRUE causes the actions to be performed and the "nextState" to be entered.

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

              • nextState (string) -- [REQUIRED]

                The next state to enter.

        • onEnter (dict) --

          When entering this state, perform these "actions" if the "condition" is TRUE.

          • events (list) --

            Specifies the actions that are performed when the state is entered and the "condition" is TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

        • onExit (dict) --

          When exiting this state, perform these "actions" if the specified "condition" is TRUE.

          • events (list) --

            Specifies the "actions" that are performed when the state is exited and the "condition" is TRUE.

            • (dict) --

              Specifies the "actions" to be performed when the "condition" evaluates to TRUE.

              • eventName (string) -- [REQUIRED]

                The name of the event.

              • condition (string) --

                [Optional] The Boolean expression that when TRUE causes the "actions" to be performed. If not present, the actions are performed (=TRUE); if the expression result is not a Boolean value, the actions are NOT performed (=FALSE).

              • actions (list) --

                The actions to be performed.

                • (dict) --

                  An action to be performed when the "condition" is TRUE.

                  • setVariable (dict) --

                    Sets a variable to a specified value.

                    • variableName (string) -- [REQUIRED]

                      The name of the variable.

                    • value (string) -- [REQUIRED]

                      The new value of the variable.

                  • sns (dict) --

                    Sends an Amazon SNS message.

                    • targetArn (string) -- [REQUIRED]

                      The ARN of the Amazon SNS target where the message is sent.

                  • iotTopicPublish (dict) --

                    Publishes an MQTT message with the given topic to the AWS IoT message broker.

                    • mqttTopic (string) -- [REQUIRED]

                      The MQTT topic of the message.

                  • setTimer (dict) --

                    Information needed to set the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer.

                    • seconds (integer) -- [REQUIRED]

                      The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy.

                  • clearTimer (dict) --

                    Information needed to clear the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to clear.

                  • resetTimer (dict) --

                    Information needed to reset the timer.

                    • timerName (string) -- [REQUIRED]

                      The name of the timer to reset.

                  • lambda (dict) --

                    Calls an AWS Lambda function, passing in information about the detector model instance and the event which triggered the action.

                    • functionArn (string) -- [REQUIRED]

                      The ARN of the AWS Lambda function which is executed.

                  • iotEvents (dict) --

                    Sends an IoT Events input, passing in information about the detector model instance and the event which triggered the action.

                    • inputName (string) -- [REQUIRED]

                      The name of the AWS IoT Events input where the data is sent.

                  • sqs (dict) --

                    Sends information about the detector model instance and the event which triggered the action to an Amazon SQS queue.

                    • queueUrl (string) -- [REQUIRED]

                      The URL of the Amazon SQS queue where the data is written.

                    • useBase64 (boolean) --

                      Set this to TRUE if you want the data to be Base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

                  • firehose (dict) --

                    Sends information about the detector model instance and the event which triggered the action to a Kinesis Data Firehose delivery stream.

                    • deliveryStreamName (string) -- [REQUIRED]

                      The name of the Kinesis Data Firehose delivery stream where the data is written.

                    • separator (string) --

                      A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).

    • initialStateName (string) -- [REQUIRED]

      The state that is entered at the creation of each detector (instance).

  • detectorModelDescription (string) -- A brief description of the detector model.
  • roleArn (string) --

    [REQUIRED]

    The ARN of the role that grants permission to AWS IoT Events to perform its operations.

  • evaluationMethod (string) -- When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.
Return type

dict

Returns

Response Syntax

{
    'detectorModelConfiguration': {
        'detectorModelName': 'string',
        'detectorModelVersion': 'string',
        'detectorModelDescription': 'string',
        'detectorModelArn': 'string',
        'roleArn': 'string',
        'creationTime': datetime(2015, 1, 1),
        'lastUpdateTime': datetime(2015, 1, 1),
        'status': 'ACTIVE'|'ACTIVATING'|'INACTIVE'|'DEPRECATED'|'DRAFT'|'PAUSED'|'FAILED',
        'key': 'string',
        'evaluationMethod': 'BATCH'|'SERIAL'
    }
}

Response Structure

  • (dict) --

    • detectorModelConfiguration (dict) --

      Information about how the detector model is configured.

      • detectorModelName (string) --

        The name of the detector model.

      • detectorModelVersion (string) --

        The version of the detector model.

      • detectorModelDescription (string) --

        A brief description of the detector model.

      • detectorModelArn (string) --

        The ARN of the detector model.

      • roleArn (string) --

        The ARN of the role that grants permission to AWS IoT Events to perform its operations.

      • creationTime (datetime) --

        The time the detector model was created.

      • lastUpdateTime (datetime) --

        The time the detector model was last updated.

      • status (string) --

        The status of the detector model.

      • key (string) --

        The input attribute key used to identify a device or system to create a detector (an instance of the detector model) and then to route each input received to the appropriate detector (instance). This parameter uses a JSON-path expression to specify the attribute-value pair in the message payload of each input that is used to identify the device associated with the input.

      • evaluationMethod (string) --

        When set to SERIAL , variables are updated and event conditions evaluated in the order that the events are defined. When set to BATCH , variables are updated and events performed only after all event conditions are evaluated.

update_input(**kwargs)

Updates an input.

See also: AWS API Documentation

Request Syntax

response = client.update_input(
    inputName='string',
    inputDescription='string',
    inputDefinition={
        'attributes': [
            {
                'jsonPath': 'string'
            },
        ]
    }
)
Parameters
  • inputName (string) --

    [REQUIRED]

    The name of the input you want to update.

  • inputDescription (string) -- A brief description of the input.
  • inputDefinition (dict) --

    [REQUIRED]

    The definition of the input.

    • attributes (list) -- [REQUIRED]

      The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the "condition" expressions used by detectors that monitor this input.

      • (dict) --

        The attributes from the JSON payload that are made available by the input. Inputs are derived from messages sent to the AWS IoT Events system using BatchPutMessage . Each such message contains a JSON payload, and those attributes (and their paired values) specified here are available for use in the condition expressions used by detectors.

        • jsonPath (string) -- [REQUIRED]

          An expression that specifies an attribute-value pair in a JSON structure. Use this to specify an attribute from the JSON payload that is made available by the input. Inputs are derived from messages sent to the AWS IoT Events system (BatchPutMessage ). Each such message contains a JSON payload, and the attribute (and its paired value) specified here are available for use in the "condition" expressions used by detectors.

          Syntax: <field-name>.<field-name>...

Return type

dict

Returns

Response Syntax

{
    'inputConfiguration': {
        'inputName': 'string',
        'inputDescription': 'string',
        'inputArn': 'string',
        'creationTime': datetime(2015, 1, 1),
        'lastUpdateTime': datetime(2015, 1, 1),
        'status': 'CREATING'|'UPDATING'|'ACTIVE'|'DELETING'
    }
}

Response Structure

  • (dict) --

    • inputConfiguration (dict) --

      Information about the configuration of the input.

      • inputName (string) --

        The name of the input.

      • inputDescription (string) --

        A brief description of the input.

      • inputArn (string) --

        The ARN of the input.

      • creationTime (datetime) --

        The time the input was created.

      • lastUpdateTime (datetime) --

        The last time the input was updated.

      • status (string) --

        The status of the input.

Paginators

The available paginators are: