CodeBuild

Table of Contents

Client

class CodeBuild.Client

A low-level client representing AWS CodeBuild:

import boto3

client = boto3.client('codebuild')

These are the available methods:

batch_delete_builds(**kwargs)

Deletes one or more builds.

See also: AWS API Documentation

Request Syntax

response = client.batch_delete_builds(
    ids=[
        'string',
    ]
)
Parameters
ids (list) --

[REQUIRED]

The IDs of the builds to delete.

  • (string) --
Return type
dict
Returns
Response Syntax
{
    'buildsDeleted': [
        'string',
    ],
    'buildsNotDeleted': [
        {
            'id': 'string',
            'statusCode': 'string'
        },
    ]
}

Response Structure

  • (dict) --
    • buildsDeleted (list) --

      The IDs of the builds that were successfully deleted.

      • (string) --
    • buildsNotDeleted (list) --

      Information about any builds that could not be successfully deleted.

      • (dict) --

        Information about a build that could not be successfully deleted.

        • id (string) --

          The ID of the build that could not be successfully deleted.

        • statusCode (string) --

          Additional information about the build that could not be successfully deleted.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
batch_get_builds(**kwargs)

Gets information about one or more builds.

See also: AWS API Documentation

Request Syntax

response = client.batch_get_builds(
    ids=[
        'string',
    ]
)
Parameters
ids (list) --

[REQUIRED]

The IDs of the builds.

  • (string) --
Return type
dict
Returns
Response Syntax
{
    'builds': [
        {
            'id': 'string',
            'arn': 'string',
            'buildNumber': 123,
            'startTime': datetime(2015, 1, 1),
            'endTime': datetime(2015, 1, 1),
            'currentPhase': 'string',
            'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
            'sourceVersion': 'string',
            'resolvedSourceVersion': 'string',
            'projectName': 'string',
            'phases': [
                {
                    'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                    'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                    'startTime': datetime(2015, 1, 1),
                    'endTime': datetime(2015, 1, 1),
                    'durationInSeconds': 123,
                    'contexts': [
                        {
                            'statusCode': 'string',
                            'message': 'string'
                        },
                    ]
                },
            ],
            'source': {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
            'secondarySources': [
                {
                    'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                    'location': 'string',
                    'gitCloneDepth': 123,
                    'gitSubmodulesConfig': {
                        'fetchSubmodules': True|False
                    },
                    'buildspec': 'string',
                    'auth': {
                        'type': 'OAUTH',
                        'resource': 'string'
                    },
                    'reportBuildStatus': True|False,
                    'buildStatusConfig': {
                        'context': 'string',
                        'targetUrl': 'string'
                    },
                    'insecureSsl': True|False,
                    'sourceIdentifier': 'string'
                },
            ],
            'secondarySourceVersions': [
                {
                    'sourceIdentifier': 'string',
                    'sourceVersion': 'string'
                },
            ],
            'artifacts': {
                'location': 'string',
                'sha256sum': 'string',
                'md5sum': 'string',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
            'secondaryArtifacts': [
                {
                    'location': 'string',
                    'sha256sum': 'string',
                    'md5sum': 'string',
                    'overrideArtifactName': True|False,
                    'encryptionDisabled': True|False,
                    'artifactIdentifier': 'string'
                },
            ],
            'cache': {
                'type': 'NO_CACHE'|'S3'|'LOCAL',
                'location': 'string',
                'modes': [
                    'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
                ]
            },
            'environment': {
                'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
                'image': 'string',
                'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
                'environmentVariables': [
                    {
                        'name': 'string',
                        'value': 'string',
                        'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                    },
                ],
                'privilegedMode': True|False,
                'certificate': 'string',
                'registryCredential': {
                    'credential': 'string',
                    'credentialProvider': 'SECRETS_MANAGER'
                },
                'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
            },
            'serviceRole': 'string',
            'logs': {
                'groupName': 'string',
                'streamName': 'string',
                'deepLink': 'string',
                's3DeepLink': 'string',
                'cloudWatchLogsArn': 'string',
                's3LogsArn': 'string',
                'cloudWatchLogs': {
                    'status': 'ENABLED'|'DISABLED',
                    'groupName': 'string',
                    'streamName': 'string'
                },
                's3Logs': {
                    'status': 'ENABLED'|'DISABLED',
                    'location': 'string',
                    'encryptionDisabled': True|False
                }
            },
            'timeoutInMinutes': 123,
            'queuedTimeoutInMinutes': 123,
            'buildComplete': True|False,
            'initiator': 'string',
            'vpcConfig': {
                'vpcId': 'string',
                'subnets': [
                    'string',
                ],
                'securityGroupIds': [
                    'string',
                ]
            },
            'networkInterface': {
                'subnetId': 'string',
                'networkInterfaceId': 'string'
            },
            'encryptionKey': 'string',
            'exportedEnvironmentVariables': [
                {
                    'name': 'string',
                    'value': 'string'
                },
            ],
            'reportArns': [
                'string',
            ],
            'fileSystemLocations': [
                {
                    'type': 'EFS',
                    'location': 'string',
                    'mountPoint': 'string',
                    'identifier': 'string',
                    'mountOptions': 'string'
                },
            ],
            'debugSession': {
                'sessionEnabled': True|False,
                'sessionTarget': 'string'
            }
        },
    ],
    'buildsNotFound': [
        'string',
    ]
}

Response Structure

  • (dict) --
    • builds (list) --

      Information about the requested builds.

      • (dict) --

        Information about a build.

        • id (string) --

          The unique ID for the build.

        • arn (string) --

          The Amazon Resource Name (ARN) of the build.

        • buildNumber (integer) --

          The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.

        • startTime (datetime) --

          When the build process started, expressed in Unix time format.

        • endTime (datetime) --

          When the build process ended, expressed in Unix time format.

        • currentPhase (string) --

          The current build phase.

        • buildStatus (string) --

          The current status of the build. Valid values include:

          • FAILED : The build failed.
          • FAULT : The build faulted.
          • IN_PROGRESS : The build is still in progress.
          • STOPPED : The build stopped.
          • SUCCEEDED : The build succeeded.
          • TIMED_OUT : The build timed out.
        • sourceVersion (string) --

          Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.

          For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

        • resolvedSourceVersion (string) --

          An identifier for the version of this build's source code.

          • For AWS CodeCommit, GitHub, GitHub Enterprise, and BitBucket, the commit ID.
          • For AWS CodePipeline, the source revision provided by AWS CodePipeline.
          • For Amazon Simple Storage Service (Amazon S3), this does not apply.
        • projectName (string) --

          The name of the AWS CodeBuild project.

        • phases (list) --

          Information about all previous build phases that are complete and information about any current build phase that is not yet complete.

          • (dict) --

            Information about a stage for a build.

            • phaseType (string) --

              The name of the build phase. Valid values include:

              • BUILD : Core build activities typically occur in this build phase.
              • COMPLETED : The build has been completed.
              • DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
              • FINALIZING : The build process is completing in this build phase.
              • INSTALL : Installation activities typically occur in this build phase.
              • POST_BUILD : Post-build activities typically occur in this build phase.
              • PRE_BUILD : Pre-build activities typically occur in this build phase.
              • PROVISIONING : The build environment is being set up.
              • QUEUED : The build has been submitted and is queued behind other submitted builds.
              • SUBMITTED : The build has been submitted.
              • UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
            • phaseStatus (string) --

              The current status of the build phase. Valid values include:

              • FAILED : The build phase failed.
              • FAULT : The build phase faulted.
              • IN_PROGRESS : The build phase is still in progress.
              • QUEUED : The build has been submitted and is queued behind other submitted builds.
              • STOPPED : The build phase stopped.
              • SUCCEEDED : The build phase succeeded.
              • TIMED_OUT : The build phase timed out.
            • startTime (datetime) --

              When the build phase started, expressed in Unix time format.

            • endTime (datetime) --

              When the build phase ended, expressed in Unix time format.

            • durationInSeconds (integer) --

              How long, in seconds, between the starting and ending times of the build's phase.

            • contexts (list) --

              Additional information about a build phase, especially to help troubleshoot a failed build.

              • (dict) --

                Additional information about a build phase that has an error. You can use this information for troubleshooting.

                • statusCode (string) --

                  The status code for the context of the build phase.

                • message (string) --

                  An explanation of the build phase's context. This might include a command ID and an exit code.

        • source (dict) --

          Information about the source code to be built.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

        • secondarySources (list) --

          An array of ProjectSource objects.

          • (dict) --

            Information about the build input source code for the build project.

            • type (string) --

              The type of repository that contains the source code to be built. Valid values include:

              • BITBUCKET : The source code is in a Bitbucket repository.
              • CODECOMMIT : The source code is in an AWS CodeCommit repository.
              • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
              • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
              • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
              • NO_SOURCE : The project does not have input source code.
              • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
            • location (string) --

              Information about the location of the source code to be built. Valid values include:

              • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
              • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
              • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
                • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
                • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
              • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
              • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • gitCloneDepth (integer) --

              Information about the Git clone depth for the build project.

            • gitSubmodulesConfig (dict) --

              Information about the Git submodules configuration for the build project.

              • fetchSubmodules (boolean) --

                Set to true to fetch Git submodules for your AWS CodeBuild build project.

            • buildspec (string) --

              The buildspec file declaration to use for the builds in this build project.

              If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

            • auth (dict) --

              Information about the authorization settings for AWS CodeBuild to access the source code to be built.

              This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

              • type (string) --

                Note

                This data type is deprecated and is no longer accurate or used.

                The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

              • resource (string) --

                The resource value that applies to the specified authorization type.

            • reportBuildStatus (boolean) --

              Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

              Note

              The status of a build triggered by a webhook is always reported to your source provider.

            • buildStatusConfig (dict) --

              Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

              • context (string) --

                Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

                Bitbucket

                This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

                GitHub/GitHub Enterprise Server

                This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

              • targetUrl (string) --

                Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

                Bitbucket

                This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

                GitHub/GitHub Enterprise Server

                This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • insecureSsl (boolean) --

              Enable this flag to ignore SSL warnings while connecting to the project source code.

            • sourceIdentifier (string) --

              An identifier for this project source.

        • secondarySourceVersions (list) --

          An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:

          • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
          • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
          • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
          • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.
          • (dict) --

            A source identifier and its corresponding version.

            • sourceIdentifier (string) --

              An identifier for a source in the build project.

            • sourceVersion (string) --

              The source version for the corresponding source identifier. If specified, must be one of:

              • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
              • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
              • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
              • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

              For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

        • artifacts (dict) --

          Information about the output artifacts for the build.

          • location (string) --

            Information about the location of the build artifacts.

          • sha256sum (string) --

            The SHA-256 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • md5sum (string) --

            The MD5 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Information that tells you if encryption for build artifacts is disabled.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

        • secondaryArtifacts (list) --

          An array of ProjectArtifacts objects.

          • (dict) --

            Information about build output artifacts.

            • location (string) --

              Information about the location of the build artifacts.

            • sha256sum (string) --

              The SHA-256 hash of the build artifact.

              You can use this hash along with a checksum tool to confirm file integrity and authenticity.

              Note

              This value is available only if the build project's packaging value is set to ZIP .

            • md5sum (string) --

              The MD5 hash of the build artifact.

              You can use this hash along with a checksum tool to confirm file integrity and authenticity.

              Note

              This value is available only if the build project's packaging value is set to ZIP .

            • overrideArtifactName (boolean) --

              If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

            • encryptionDisabled (boolean) --

              Information that tells you if encryption for build artifacts is disabled.

            • artifactIdentifier (string) --

              An identifier for this artifact definition.

        • cache (dict) --

          Information about the cache for the build.

          • type (string) --

            The type of cache used by the build project. Valid values include:

            • NO_CACHE : The build project does not use any cache.
            • S3 : The build project reads and writes from and to S3.
            • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
          • location (string) --

            Information about the cache location:

            • NO_CACHE or LOCAL : This value is ignored.
            • S3 : This is the S3 bucket name/prefix.
          • modes (list) --

            If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

            • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
            • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

            Note

            • You can use a Docker layer cache in the Linux environment only.
            • The privileged flag must be set so that your project has the required Docker permissions.
            • You should consider the security implications before you use a Docker layer cache.
            • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
              • Only directories can be specified for caching. You cannot specify individual files.
              • Symlinks are used to reference cached directories.
              • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
            • (string) --
        • environment (dict) --

          Information about the build environment for this build.

          • type (string) --

            The type of build environment to use for related builds.

            • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
            • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
            • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
          • image (string) --

            The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

            • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
            • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
          • computeType (string) --

            Information about the compute resources the build project uses. Available values include:

            • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
            • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
            • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
            • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

            If you use BUILD_GENERAL1_LARGE :

            • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
            • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
            • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

            For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

          • environmentVariables (list) --

            A set of environment variables to make available to builds for this build project.

            • (dict) --

              Information about an environment variable for a build project or a build.

              • name (string) --

                The name or key of the environment variable.

              • value (string) --

                The value of the environment variable.

                Warning

                We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

              • type (string) --

                The type of environment variable. Valid values include:

          • privilegedMode (boolean) --

            Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

            You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

            If the operating system's base image is Ubuntu Linux:

            - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

            - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

            If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

            - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

            - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

          • certificate (string) --

            The certificate to use with this build project.

          • registryCredential (dict) --

            The credentials for access to a private registry.

            • credential (string) --

              The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

              Note

              The credential can use the name of the credentials only if they exist in your current AWS Region.

            • credentialProvider (string) --

              The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

          • imagePullCredentialsType (string) --

            The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

            • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
            • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

            When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

        • serviceRole (string) --

          The name of a service role used for this build.

        • logs (dict) --

          Information about the build's logs in Amazon CloudWatch Logs.

          • groupName (string) --

            The name of the Amazon CloudWatch Logs group for the build logs.

          • streamName (string) --

            The name of the Amazon CloudWatch Logs stream for the build logs.

          • deepLink (string) --

            The URL to an individual build log in Amazon CloudWatch Logs.

          • s3DeepLink (string) --

            The URL to a build log in an S3 bucket.

          • cloudWatchLogsArn (string) --

            The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .

          • s3LogsArn (string) --

            The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .

          • cloudWatchLogs (dict) --

            Information about Amazon CloudWatch Logs for a build project.

            • status (string) --

              The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

              • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
              • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
            • groupName (string) --

              The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

            • streamName (string) --

              The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • s3Logs (dict) --

            Information about S3 logs for a build project.

            • status (string) --

              The current status of the S3 build logs. Valid values are:

              • ENABLED : S3 build logs are enabled for this build project.
              • DISABLED : S3 build logs are not enabled for this build project.
            • location (string) --

              The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

            • encryptionDisabled (boolean) --

              Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

        • timeoutInMinutes (integer) --

          How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.

        • queuedTimeoutInMinutes (integer) --

          The number of minutes a build is allowed to be queued before it times out.

        • buildComplete (boolean) --

          Whether the build is complete. True if complete; otherwise, false.

        • initiator (string) --

          The entity that started the build. Valid values include:

          • If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
          • If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example, MyUserName ).
          • If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .
        • vpcConfig (dict) --

          If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.

          • vpcId (string) --

            The ID of the Amazon VPC.

          • subnets (list) --

            A list of one or more subnet IDs in your Amazon VPC.

            • (string) --
          • securityGroupIds (list) --

            A list of one or more security groups IDs in your Amazon VPC.

            • (string) --
        • networkInterface (dict) --

          Describes a network interface.

          • subnetId (string) --

            The ID of the subnet.

          • networkInterfaceId (string) --

            The ID of the network interface.

        • encryptionKey (string) --

          The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

          Note

          You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

          You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

        • exportedEnvironmentVariables (list) --

          A list of exported environment variables for this build.

          • (dict) --

            Information about an exported environment variable.

            • name (string) --

              The name of this exported environment variable.

            • value (string) --

              The value assigned to this exported environment variable.

              Note

              During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.

        • reportArns (list) --

          An array of the ARNs associated with this build's reports.

          • (string) --
        • fileSystemLocations (list) --

          An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

          • (dict) --

            Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

            • type (string) --

              The type of the file system. The one supported type is EFS .

            • location (string) --

              A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

              The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

            • mountPoint (string) --

              The location in the container where you mount the file system.

            • identifier (string) --

              The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

              The identifier is used to mount your file system.

            • mountOptions (string) --

              The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

        • debugSession (dict) --

          Contains information about the debug session for this build.

          • sessionEnabled (boolean) --

            Specifies if session debugging is enabled for this build.

          • sessionTarget (string) --

            Contains the identifier of the Session Manager session used for the build. To work with the paused build, you open this session to examine, control, and resume the build.

    • buildsNotFound (list) --

      The IDs of builds for which information could not be found.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException

Examples

The following example gets information about builds with the specified build IDs.

response = client.batch_get_builds(
    ids=[
        'codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
        'codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
    ],
)

print(response)

Expected Output:

{
    'builds': [
        {
            'arn': 'arn:aws:codebuild:us-east-1:123456789012:build/codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
            'artifacts': {
                'location': 'arn:aws:s3:::codebuild-123456789012-output-bucket/codebuild-demo-project',
            },
            'buildComplete': True,
            'buildStatus': 'SUCCEEDED',
            'currentPhase': 'COMPLETED',
            'endTime': 1479832474.764,
            'environment': {
                'type': 'LINUX_CONTAINER',
                'computeType': 'BUILD_GENERAL1_SMALL',
                'environmentVariables': [
                ],
                'image': 'aws/codebuild/java:openjdk-8',
                'privilegedMode': False,
            },
            'id': 'codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
            'initiator': 'MyDemoUser',
            'logs': {
                'deepLink': 'https://console.aws.amazon.com/cloudwatch/home?region=us-east-1#logEvent:group=/aws/codebuild/codebuild-demo-project;stream=9b0ac37f-d19e-4254-9079-f47e9a389eEX',
                'groupName': '/aws/codebuild/codebuild-demo-project',
                'streamName': '9b0ac37f-d19e-4254-9079-f47e9a389eEX',
            },
            'phases': [
                {
                    'durationInSeconds': 0,
                    'endTime': 1479832342.23,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'SUBMITTED',
                    'startTime': 1479832341.854,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 72,
                    'endTime': 1479832415.064,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'PROVISIONING',
                    'startTime': 1479832342.23,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 46,
                    'endTime': 1479832461.261,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'DOWNLOAD_SOURCE',
                    'startTime': 1479832415.064,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479832461.354,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'INSTALL',
                    'startTime': 1479832461.261,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479832461.448,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'PRE_BUILD',
                    'startTime': 1479832461.354,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 9,
                    'endTime': 1479832471.115,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'BUILD',
                    'startTime': 1479832461.448,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479832471.224,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'POST_BUILD',
                    'startTime': 1479832471.115,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479832471.791,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'UPLOAD_ARTIFACTS',
                    'startTime': 1479832471.224,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 2,
                    'endTime': 1479832474.764,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'FINALIZING',
                    'startTime': 1479832471.791,
                },
                {
                    'phaseType': 'COMPLETED',
                    'startTime': 1479832474.764,
                },
            ],
            'projectName': 'codebuild-demo-project',
            'source': {
                'type': 'S3',
                'buildspec': '',
                'location': 'arn:aws:s3:::codebuild-123456789012-input-bucket/MessageUtil.zip',
            },
            'startTime': 1479832341.854,
            'timeoutInMinutes': 60,
        },
        {
            'arn': 'arn:aws:codebuild:us-east-1:123456789012:build/codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
            'artifacts': {
                'location': 'arn:aws:s3:::codebuild-123456789012-output-bucket/codebuild-demo-project',
            },
            'buildComplete': True,
            'buildStatus': 'SUCCEEDED',
            'currentPhase': 'COMPLETED',
            'endTime': 1479401214.239,
            'environment': {
                'type': 'LINUX_CONTAINER',
                'computeType': 'BUILD_GENERAL1_SMALL',
                'environmentVariables': [
                ],
                'image': 'aws/codebuild/java:openjdk-8',
                'privilegedMode': False,
            },
            'id': 'codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
            'initiator': 'MyDemoUser',
            'logs': {
                'deepLink': 'https://console.aws.amazon.com/cloudwatch/home?region=us-east-1#logEvent:group=/aws/codebuild/codebuild-demo-project;stream=b79a46f7-1473-4636-a23f-da9c45c208EX',
                'groupName': '/aws/codebuild/codebuild-demo-project',
                'streamName': 'b79a46f7-1473-4636-a23f-da9c45c208EX',
            },
            'phases': [
                {
                    'durationInSeconds': 0,
                    'endTime': 1479401082.342,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'SUBMITTED',
                    'startTime': 1479401081.869,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 71,
                    'endTime': 1479401154.129,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'PROVISIONING',
                    'startTime': 1479401082.342,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 45,
                    'endTime': 1479401199.136,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'DOWNLOAD_SOURCE',
                    'startTime': 1479401154.129,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479401199.236,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'INSTALL',
                    'startTime': 1479401199.136,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479401199.345,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'PRE_BUILD',
                    'startTime': 1479401199.236,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 9,
                    'endTime': 1479401208.68,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'BUILD',
                    'startTime': 1479401199.345,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479401208.783,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'POST_BUILD',
                    'startTime': 1479401208.68,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 0,
                    'endTime': 1479401209.463,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'UPLOAD_ARTIFACTS',
                    'startTime': 1479401208.783,
                },
                {
                    'contexts': [
                    ],
                    'durationInSeconds': 4,
                    'endTime': 1479401214.239,
                    'phaseStatus': 'SUCCEEDED',
                    'phaseType': 'FINALIZING',
                    'startTime': 1479401209.463,
                },
                {
                    'phaseType': 'COMPLETED',
                    'startTime': 1479401214.239,
                },
            ],
            'projectName': 'codebuild-demo-project',
            'source': {
                'type': 'S3',
                'location': 'arn:aws:s3:::codebuild-123456789012-input-bucket/MessageUtil.zip',
            },
            'startTime': 1479401081.869,
            'timeoutInMinutes': 60,
        },
    ],
    'ResponseMetadata': {
        '...': '...',
    },
}
batch_get_projects(**kwargs)

Gets information about one or more build projects.

See also: AWS API Documentation

Request Syntax

response = client.batch_get_projects(
    names=[
        'string',
    ]
)
Parameters
names (list) --

[REQUIRED]

The names or ARNs of the build projects. To get information about a project shared with your AWS account, its ARN must be specified. You cannot specify a shared project using its name.

  • (string) --
Return type
dict
Returns
Response Syntax
{
    'projects': [
        {
            'name': 'string',
            'arn': 'string',
            'description': 'string',
            'source': {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
            'secondarySources': [
                {
                    'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                    'location': 'string',
                    'gitCloneDepth': 123,
                    'gitSubmodulesConfig': {
                        'fetchSubmodules': True|False
                    },
                    'buildspec': 'string',
                    'auth': {
                        'type': 'OAUTH',
                        'resource': 'string'
                    },
                    'reportBuildStatus': True|False,
                    'buildStatusConfig': {
                        'context': 'string',
                        'targetUrl': 'string'
                    },
                    'insecureSsl': True|False,
                    'sourceIdentifier': 'string'
                },
            ],
            'sourceVersion': 'string',
            'secondarySourceVersions': [
                {
                    'sourceIdentifier': 'string',
                    'sourceVersion': 'string'
                },
            ],
            'artifacts': {
                'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
                'location': 'string',
                'path': 'string',
                'namespaceType': 'NONE'|'BUILD_ID',
                'name': 'string',
                'packaging': 'NONE'|'ZIP',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
            'secondaryArtifacts': [
                {
                    'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
                    'location': 'string',
                    'path': 'string',
                    'namespaceType': 'NONE'|'BUILD_ID',
                    'name': 'string',
                    'packaging': 'NONE'|'ZIP',
                    'overrideArtifactName': True|False,
                    'encryptionDisabled': True|False,
                    'artifactIdentifier': 'string'
                },
            ],
            'cache': {
                'type': 'NO_CACHE'|'S3'|'LOCAL',
                'location': 'string',
                'modes': [
                    'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
                ]
            },
            'environment': {
                'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
                'image': 'string',
                'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
                'environmentVariables': [
                    {
                        'name': 'string',
                        'value': 'string',
                        'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                    },
                ],
                'privilegedMode': True|False,
                'certificate': 'string',
                'registryCredential': {
                    'credential': 'string',
                    'credentialProvider': 'SECRETS_MANAGER'
                },
                'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
            },
            'serviceRole': 'string',
            'timeoutInMinutes': 123,
            'queuedTimeoutInMinutes': 123,
            'encryptionKey': 'string',
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ],
            'created': datetime(2015, 1, 1),
            'lastModified': datetime(2015, 1, 1),
            'webhook': {
                'url': 'string',
                'payloadUrl': 'string',
                'secret': 'string',
                'branchFilter': 'string',
                'filterGroups': [
                    [
                        {
                            'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                            'pattern': 'string',
                            'excludeMatchedPattern': True|False
                        },
                    ],
                ],
                'lastModifiedSecret': datetime(2015, 1, 1)
            },
            'vpcConfig': {
                'vpcId': 'string',
                'subnets': [
                    'string',
                ],
                'securityGroupIds': [
                    'string',
                ]
            },
            'badge': {
                'badgeEnabled': True|False,
                'badgeRequestUrl': 'string'
            },
            'logsConfig': {
                'cloudWatchLogs': {
                    'status': 'ENABLED'|'DISABLED',
                    'groupName': 'string',
                    'streamName': 'string'
                },
                's3Logs': {
                    'status': 'ENABLED'|'DISABLED',
                    'location': 'string',
                    'encryptionDisabled': True|False
                }
            },
            'fileSystemLocations': [
                {
                    'type': 'EFS',
                    'location': 'string',
                    'mountPoint': 'string',
                    'identifier': 'string',
                    'mountOptions': 'string'
                },
            ]
        },
    ],
    'projectsNotFound': [
        'string',
    ]
}

Response Structure

  • (dict) --
    • projects (list) --

      Information about the requested build projects.

      • (dict) --

        Information about a build project.

        • name (string) --

          The name of the build project.

        • arn (string) --

          The Amazon Resource Name (ARN) of the build project.

        • description (string) --

          A description that makes the build project easy to identify.

        • source (dict) --

          Information about the build input source code for this build project.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

        • secondarySources (list) --

          An array of ProjectSource objects.

          • (dict) --

            Information about the build input source code for the build project.

            • type (string) --

              The type of repository that contains the source code to be built. Valid values include:

              • BITBUCKET : The source code is in a Bitbucket repository.
              • CODECOMMIT : The source code is in an AWS CodeCommit repository.
              • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
              • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
              • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
              • NO_SOURCE : The project does not have input source code.
              • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
            • location (string) --

              Information about the location of the source code to be built. Valid values include:

              • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
              • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
              • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
                • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
                • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
              • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
              • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • gitCloneDepth (integer) --

              Information about the Git clone depth for the build project.

            • gitSubmodulesConfig (dict) --

              Information about the Git submodules configuration for the build project.

              • fetchSubmodules (boolean) --

                Set to true to fetch Git submodules for your AWS CodeBuild build project.

            • buildspec (string) --

              The buildspec file declaration to use for the builds in this build project.

              If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

            • auth (dict) --

              Information about the authorization settings for AWS CodeBuild to access the source code to be built.

              This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

              • type (string) --

                Note

                This data type is deprecated and is no longer accurate or used.

                The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

              • resource (string) --

                The resource value that applies to the specified authorization type.

            • reportBuildStatus (boolean) --

              Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

              Note

              The status of a build triggered by a webhook is always reported to your source provider.

            • buildStatusConfig (dict) --

              Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

              • context (string) --

                Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

                Bitbucket

                This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

                GitHub/GitHub Enterprise Server

                This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

              • targetUrl (string) --

                Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

                Bitbucket

                This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

                GitHub/GitHub Enterprise Server

                This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • insecureSsl (boolean) --

              Enable this flag to ignore SSL warnings while connecting to the project source code.

            • sourceIdentifier (string) --

              An identifier for this project source.

        • sourceVersion (string) --

          A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:

          • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
          • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
          • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
          • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

          If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).

          For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

        • secondarySourceVersions (list) --

          An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).

          • (dict) --

            A source identifier and its corresponding version.

            • sourceIdentifier (string) --

              An identifier for a source in the build project.

            • sourceVersion (string) --

              The source version for the corresponding source identifier. If specified, must be one of:

              • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
              • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
              • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
              • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

              For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

        • artifacts (dict) --

          Information about the build output artifacts for the build project.

          • type (string) --

            The type of build output artifact. Valid values include:

            • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

            Note

            The CODEPIPELINE type is not supported for secondaryArtifacts .

            • NO_ARTIFACTS : The build project does not produce any build output.
            • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
          • location (string) --

            Information about the build output artifact location:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output bucket.
          • path (string) --

            Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

            For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

          • namespaceType (string) --

            Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • BUILD_ID : Include the build ID in the location of the build output artifact.
              • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

            For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

          • name (string) --

            Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

            For example:

            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
            • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
          • packaging (string) --

            The type of build output artifact to create:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
              • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

        • secondaryArtifacts (list) --

          An array of ProjectArtifacts objects.

          • (dict) --

            Information about the build output artifacts for the build project.

            • type (string) --

              The type of build output artifact. Valid values include:

              • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

              Note

              The CODEPIPELINE type is not supported for secondaryArtifacts .

              • NO_ARTIFACTS : The build project does not produce any build output.
              • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
            • location (string) --

              Information about the build output artifact location:

              • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
              • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
              • If type is set to S3 , this is the name of the output bucket.
            • path (string) --

              Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

              • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
              • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
              • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

              For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

            • namespaceType (string) --

              Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

              • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
              • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
              • If type is set to S3 , valid values include:
                • BUILD_ID : Include the build ID in the location of the build output artifact.
                • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

              For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

            • name (string) --

              Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

              • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
              • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
              • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

              For example:

              • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
              • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
              • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
            • packaging (string) --

              The type of build output artifact to create:

              • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
              • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
              • If type is set to S3 , valid values include:
                • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
                • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
            • overrideArtifactName (boolean) --

              If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

            • encryptionDisabled (boolean) --

              Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

            • artifactIdentifier (string) --

              An identifier for this artifact definition.

        • cache (dict) --

          Information about the cache for the build project.

          • type (string) --

            The type of cache used by the build project. Valid values include:

            • NO_CACHE : The build project does not use any cache.
            • S3 : The build project reads and writes from and to S3.
            • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
          • location (string) --

            Information about the cache location:

            • NO_CACHE or LOCAL : This value is ignored.
            • S3 : This is the S3 bucket name/prefix.
          • modes (list) --

            If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

            • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
            • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

            Note

            • You can use a Docker layer cache in the Linux environment only.
            • The privileged flag must be set so that your project has the required Docker permissions.
            • You should consider the security implications before you use a Docker layer cache.
            • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
              • Only directories can be specified for caching. You cannot specify individual files.
              • Symlinks are used to reference cached directories.
              • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
            • (string) --
        • environment (dict) --

          Information about the build environment for this build project.

          • type (string) --

            The type of build environment to use for related builds.

            • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
            • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
            • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
          • image (string) --

            The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

            • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
            • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
          • computeType (string) --

            Information about the compute resources the build project uses. Available values include:

            • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
            • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
            • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
            • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

            If you use BUILD_GENERAL1_LARGE :

            • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
            • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
            • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

            For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

          • environmentVariables (list) --

            A set of environment variables to make available to builds for this build project.

            • (dict) --

              Information about an environment variable for a build project or a build.

              • name (string) --

                The name or key of the environment variable.

              • value (string) --

                The value of the environment variable.

                Warning

                We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

              • type (string) --

                The type of environment variable. Valid values include:

          • privilegedMode (boolean) --

            Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

            You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

            If the operating system's base image is Ubuntu Linux:

            - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

            - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

            If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

            - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

            - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

          • certificate (string) --

            The certificate to use with this build project.

          • registryCredential (dict) --

            The credentials for access to a private registry.

            • credential (string) --

              The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

              Note

              The credential can use the name of the credentials only if they exist in your current AWS Region.

            • credentialProvider (string) --

              The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

          • imagePullCredentialsType (string) --

            The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

            • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
            • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

            When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

        • serviceRole (string) --

          The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

        • timeoutInMinutes (integer) --

          How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.

        • queuedTimeoutInMinutes (integer) --

          The number of minutes a build is allowed to be queued before it times out.

        • encryptionKey (string) --

          The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

          Note

          You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

          You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

        • tags (list) --

          A list of tag key and value pairs associated with this build project.

          These tags are available for use by AWS services that support AWS CodeBuild build project tags.

          • (dict) --

            A tag, consisting of a key and a value.

            This tag is available for use by AWS services that support tags in AWS CodeBuild.

            • key (string) --

              The tag's key.

            • value (string) --

              The tag's value.

        • created (datetime) --

          When the build project was created, expressed in Unix time format.

        • lastModified (datetime) --

          When the build project's settings were last modified, expressed in Unix time format.

        • webhook (dict) --

          Information about a webhook that connects repository events to a build project in AWS CodeBuild.

          • url (string) --

            The URL to the webhook.

          • payloadUrl (string) --

            The AWS CodeBuild endpoint where webhook events are sent.

          • secret (string) --

            The secret token of the associated repository.

            Note

            A Bitbucket webhook does not support secret .

          • branchFilter (string) --

            A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

            Note

            It is recommended that you use filterGroups instead of branchFilter .

          • filterGroups (list) --

            An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

            For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

            • (list) --
              • (dict) --

                A filter used to determine which webhooks trigger a build.

                • type (string) --

                  The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

                  EVENT

                  A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

                  Note

                  The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

                  ACTOR_ACCOUNT_ID

                  A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

                  HEAD_REF

                  A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

                  Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

                  BASE_REF

                  A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

                  Note

                  Works with pull request events only.

                  FILE_PATH

                  A webhook triggers a build when the path of a changed file matches the regular expression pattern .

                  Note

                  Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

                  COMMIT_MESSAGE

                  A webhook triggers a build when the head commit message matches the regular expression pattern .

                  Note

                  Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

                • pattern (string) --

                  For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

                  For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

                • excludeMatchedPattern (boolean) --

                  Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

          • lastModifiedSecret (datetime) --

            A timestamp that indicates the last time a repository's secret token was modified.

        • vpcConfig (dict) --

          Information about the VPC configuration that AWS CodeBuild accesses.

          • vpcId (string) --

            The ID of the Amazon VPC.

          • subnets (list) --

            A list of one or more subnet IDs in your Amazon VPC.

            • (string) --
          • securityGroupIds (list) --

            A list of one or more security groups IDs in your Amazon VPC.

            • (string) --
        • badge (dict) --

          Information about the build badge for the build project.

          • badgeEnabled (boolean) --

            Set this to true to generate a publicly accessible URL for your project's build badge.

          • badgeRequestUrl (string) --

            The publicly-accessible URL through which you can access the build badge for your project.

            The publicly accessible URL through which you can access the build badge for your project.

        • logsConfig (dict) --

          Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.

          • cloudWatchLogs (dict) --

            Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

            • status (string) --

              The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

              • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
              • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
            • groupName (string) --

              The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

            • streamName (string) --

              The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • s3Logs (dict) --

            Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

            • status (string) --

              The current status of the S3 build logs. Valid values are:

              • ENABLED : S3 build logs are enabled for this build project.
              • DISABLED : S3 build logs are not enabled for this build project.
            • location (string) --

              The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

            • encryptionDisabled (boolean) --

              Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

        • fileSystemLocations (list) --

          An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

          • (dict) --

            Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

            • type (string) --

              The type of the file system. The one supported type is EFS .

            • location (string) --

              A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

              The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

            • mountPoint (string) --

              The location in the container where you mount the file system.

            • identifier (string) --

              The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

              The identifier is used to mount your file system.

            • mountOptions (string) --

              The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

    • projectsNotFound (list) --

      The names of build projects for which information could not be found.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
batch_get_report_groups(**kwargs)

Returns an array of report groups.

See also: AWS API Documentation

Request Syntax

response = client.batch_get_report_groups(
    reportGroupArns=[
        'string',
    ]
)
Parameters
reportGroupArns (list) --

[REQUIRED]

An array of report group ARNs that identify the report groups to return.

  • (string) --
Return type
dict
Returns
Response Syntax
{
    'reportGroups': [
        {
            'arn': 'string',
            'name': 'string',
            'type': 'TEST',
            'exportConfig': {
                'exportConfigType': 'S3'|'NO_EXPORT',
                's3Destination': {
                    'bucket': 'string',
                    'path': 'string',
                    'packaging': 'ZIP'|'NONE',
                    'encryptionKey': 'string',
                    'encryptionDisabled': True|False
                }
            },
            'created': datetime(2015, 1, 1),
            'lastModified': datetime(2015, 1, 1),
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ]
        },
    ],
    'reportGroupsNotFound': [
        'string',
    ]
}

Response Structure

  • (dict) --
    • reportGroups (list) --

      The array of report groups returned by BatchGetReportGroups .

      • (dict) --

        A series of reports. Each report contains information about the results from running a series of test cases. You specify the test cases for a report group in the buildspec for a build project using one or more paths to the test case files.

        • arn (string) --

          The ARN of a ReportGroup .

        • name (string) --

          The name of a ReportGroup .

        • type (string) --

          The type of the ReportGroup . The one valid value is TEST .

        • exportConfig (dict) --

          Information about the destination where the raw data of this ReportGroup is exported.

          • exportConfigType (string) --

            The export configuration type. Valid values are:

            • S3 : The report results are exported to an S3 bucket.
            • NO_EXPORT : The report results are not exported.
          • s3Destination (dict) --

            A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

            • bucket (string) --

              The name of the S3 bucket where the raw data of a report are exported.

            • path (string) --

              The path to the exported report's raw data results.

            • packaging (string) --

              The type of build output artifact to create. Valid values include:

              • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
              • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
            • encryptionKey (string) --

              The encryption key for the report's encrypted raw data.

            • encryptionDisabled (boolean) --

              A boolean value that specifies if the results of a report are encrypted.

        • created (datetime) --

          The date and time this ReportGroup was created.

        • lastModified (datetime) --

          The date and time this ReportGroup was last modified.

        • tags (list) --

          A list of tag key and value pairs associated with this report group.

          These tags are available for use by AWS services that support AWS CodeBuild report group tags.

          • (dict) --

            A tag, consisting of a key and a value.

            This tag is available for use by AWS services that support tags in AWS CodeBuild.

            • key (string) --

              The tag's key.

            • value (string) --

              The tag's value.

    • reportGroupsNotFound (list) --

      An array of ARNs passed to BatchGetReportGroups that are not associated with a ReportGroup .

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
batch_get_reports(**kwargs)

Returns an array of reports.

See also: AWS API Documentation

Request Syntax

response = client.batch_get_reports(
    reportArns=[
        'string',
    ]
)
Parameters
reportArns (list) --

[REQUIRED]

An array of ARNs that identify the Report objects to return.

  • (string) --
Return type
dict
Returns
Response Syntax
{
    'reports': [
        {
            'arn': 'string',
            'type': 'TEST',
            'name': 'string',
            'reportGroupArn': 'string',
            'executionId': 'string',
            'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING',
            'created': datetime(2015, 1, 1),
            'expired': datetime(2015, 1, 1),
            'exportConfig': {
                'exportConfigType': 'S3'|'NO_EXPORT',
                's3Destination': {
                    'bucket': 'string',
                    'path': 'string',
                    'packaging': 'ZIP'|'NONE',
                    'encryptionKey': 'string',
                    'encryptionDisabled': True|False
                }
            },
            'truncated': True|False,
            'testSummary': {
                'total': 123,
                'statusCounts': {
                    'string': 123
                },
                'durationInNanoSeconds': 123
            }
        },
    ],
    'reportsNotFound': [
        'string',
    ]
}

Response Structure

  • (dict) --
    • reports (list) --

      The array of Report objects returned by BatchGetReports .

      • (dict) --

        Information about the results from running a series of test cases during the run of a build project. The test cases are specified in the buildspec for the build project using one or more paths to the test case files. You can specify any type of tests you want, such as unit tests, integration tests, and functional tests.

        • arn (string) --

          The ARN of the report run.

        • type (string) --

          The type of the report that was run.

        • name (string) --

          The name of the report that was run.

        • reportGroupArn (string) --

          The ARN of the report group associated with this report.

        • executionId (string) --

          The ARN of the build run that generated this report.

        • status (string) --

          The status of this report.

        • created (datetime) --

          The date and time this report run occurred.

        • expired (datetime) --

          The date and time a report expires. A report expires 30 days after it is created. An expired report is not available to view in CodeBuild.

        • exportConfig (dict) --

          Information about where the raw data used to generate this report was exported.

          • exportConfigType (string) --

            The export configuration type. Valid values are:

            • S3 : The report results are exported to an S3 bucket.
            • NO_EXPORT : The report results are not exported.
          • s3Destination (dict) --

            A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

            • bucket (string) --

              The name of the S3 bucket where the raw data of a report are exported.

            • path (string) --

              The path to the exported report's raw data results.

            • packaging (string) --

              The type of build output artifact to create. Valid values include:

              • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
              • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
            • encryptionKey (string) --

              The encryption key for the report's encrypted raw data.

            • encryptionDisabled (boolean) --

              A boolean value that specifies if the results of a report are encrypted.

        • truncated (boolean) --

          A boolean that specifies if this report run is truncated. The list of test cases is truncated after the maximum number of test cases is reached.

        • testSummary (dict) --

          A TestReportSummary object that contains information about this test report.

          • total (integer) --

            The number of test cases in this TestReportSummary . The total includes truncated test cases.

          • statusCounts (dict) --

            A map that contains the number of each type of status returned by the test results in this TestReportSummary .

            • (string) --
              • (integer) --
          • durationInNanoSeconds (integer) --

            The number of nanoseconds it took to run all of the test cases in this report.

    • reportsNotFound (list) --

      An array of ARNs passed to BatchGetReportGroups that are not associated with a Report .

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
create_project(**kwargs)

Creates a build project.

See also: AWS API Documentation

Request Syntax

response = client.create_project(
    name='string',
    description='string',
    source={
        'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
        'location': 'string',
        'gitCloneDepth': 123,
        'gitSubmodulesConfig': {
            'fetchSubmodules': True|False
        },
        'buildspec': 'string',
        'auth': {
            'type': 'OAUTH',
            'resource': 'string'
        },
        'reportBuildStatus': True|False,
        'buildStatusConfig': {
            'context': 'string',
            'targetUrl': 'string'
        },
        'insecureSsl': True|False,
        'sourceIdentifier': 'string'
    },
    secondarySources=[
        {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
    ],
    sourceVersion='string',
    secondarySourceVersions=[
        {
            'sourceIdentifier': 'string',
            'sourceVersion': 'string'
        },
    ],
    artifacts={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP',
        'overrideArtifactName': True|False,
        'encryptionDisabled': True|False,
        'artifactIdentifier': 'string'
    },
    secondaryArtifacts=[
        {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
    ],
    cache={
        'type': 'NO_CACHE'|'S3'|'LOCAL',
        'location': 'string',
        'modes': [
            'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
        ]
    },
    environment={
        'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
        'image': 'string',
        'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
        'environmentVariables': [
            {
                'name': 'string',
                'value': 'string',
                'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
            },
        ],
        'privilegedMode': True|False,
        'certificate': 'string',
        'registryCredential': {
            'credential': 'string',
            'credentialProvider': 'SECRETS_MANAGER'
        },
        'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
    },
    serviceRole='string',
    timeoutInMinutes=123,
    queuedTimeoutInMinutes=123,
    encryptionKey='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ],
    vpcConfig={
        'vpcId': 'string',
        'subnets': [
            'string',
        ],
        'securityGroupIds': [
            'string',
        ]
    },
    badgeEnabled=True|False,
    logsConfig={
        'cloudWatchLogs': {
            'status': 'ENABLED'|'DISABLED',
            'groupName': 'string',
            'streamName': 'string'
        },
        's3Logs': {
            'status': 'ENABLED'|'DISABLED',
            'location': 'string',
            'encryptionDisabled': True|False
        }
    },
    fileSystemLocations=[
        {
            'type': 'EFS',
            'location': 'string',
            'mountPoint': 'string',
            'identifier': 'string',
            'mountOptions': 'string'
        },
    ]
)
Parameters
  • name (string) --

    [REQUIRED]

    The name of the build project.

  • description (string) -- A description that makes the build project easy to identify.
  • source (dict) --

    [REQUIRED]

    Information about the build input source code for the build project.

    • type (string) -- [REQUIRED]

      The type of repository that contains the source code to be built. Valid values include:

      • BITBUCKET : The source code is in a Bitbucket repository.
      • CODECOMMIT : The source code is in an AWS CodeCommit repository.
      • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
      • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
      • NO_SOURCE : The project does not have input source code.
      • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    • location (string) --

      Information about the location of the source code to be built. Valid values include:

      • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
        • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
        • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
      • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
      • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
    • gitCloneDepth (integer) --

      Information about the Git clone depth for the build project.

    • gitSubmodulesConfig (dict) --

      Information about the Git submodules configuration for the build project.

      • fetchSubmodules (boolean) -- [REQUIRED]

        Set to true to fetch Git submodules for your AWS CodeBuild build project.

    • buildspec (string) --

      The buildspec file declaration to use for the builds in this build project.

      If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

    • auth (dict) --

      Information about the authorization settings for AWS CodeBuild to access the source code to be built.

      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

      • type (string) -- [REQUIRED]

        Note

        This data type is deprecated and is no longer accurate or used.

        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

      • resource (string) --

        The resource value that applies to the specified authorization type.

    • reportBuildStatus (boolean) --

      Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

      Note

      The status of a build triggered by a webhook is always reported to your source provider.

    • buildStatusConfig (dict) --

      Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

      • context (string) --

        Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

        Bitbucket

        This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

        GitHub/GitHub Enterprise Server

        This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

      • targetUrl (string) --

        Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

        Bitbucket

        This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

        GitHub/GitHub Enterprise Server

        This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

    • insecureSsl (boolean) --

      Enable this flag to ignore SSL warnings while connecting to the project source code.

    • sourceIdentifier (string) --

      An identifier for this project source.

  • secondarySources (list) --

    An array of ProjectSource objects.

    • (dict) --

      Information about the build input source code for the build project.

      • type (string) -- [REQUIRED]

        The type of repository that contains the source code to be built. Valid values include:

        • BITBUCKET : The source code is in a Bitbucket repository.
        • CODECOMMIT : The source code is in an AWS CodeCommit repository.
        • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
        • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
        • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
        • NO_SOURCE : The project does not have input source code.
        • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
      • location (string) --

        Information about the location of the source code to be built. Valid values include:

        • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
        • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
        • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
          • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
          • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
        • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
      • gitCloneDepth (integer) --

        Information about the Git clone depth for the build project.

      • gitSubmodulesConfig (dict) --

        Information about the Git submodules configuration for the build project.

        • fetchSubmodules (boolean) -- [REQUIRED]

          Set to true to fetch Git submodules for your AWS CodeBuild build project.

      • buildspec (string) --

        The buildspec file declaration to use for the builds in this build project.

        If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

      • auth (dict) --

        Information about the authorization settings for AWS CodeBuild to access the source code to be built.

        This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

        • type (string) -- [REQUIRED]

          Note

          This data type is deprecated and is no longer accurate or used.

          The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

        • resource (string) --

          The resource value that applies to the specified authorization type.

      • reportBuildStatus (boolean) --

        Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

        Note

        The status of a build triggered by a webhook is always reported to your source provider.

      • buildStatusConfig (dict) --

        Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

        • context (string) --

          Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • targetUrl (string) --

          Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

      • insecureSsl (boolean) --

        Enable this flag to ignore SSL warnings while connecting to the project source code.

      • sourceIdentifier (string) --

        An identifier for this project source.

  • sourceVersion (string) --

    A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:

    • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
    • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

    If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).

    For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • secondarySourceVersions (list) --

    An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take precedence over these secondarySourceVersions (at the project level).

    • (dict) --

      A source identifier and its corresponding version.

      • sourceIdentifier (string) -- [REQUIRED]

        An identifier for a source in the build project.

      • sourceVersion (string) -- [REQUIRED]

        The source version for the corresponding source identifier. If specified, must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • artifacts (dict) --

    [REQUIRED]

    Information about the build output artifacts for the build project.

    • type (string) -- [REQUIRED]

      The type of build output artifact. Valid values include:

      • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

      Note

      The CODEPIPELINE type is not supported for secondaryArtifacts .

      • NO_ARTIFACTS : The build project does not produce any build output.
      • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
    • location (string) --

      Information about the build output artifact location:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output bucket.
    • path (string) --

      Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

      For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

    • namespaceType (string) --

      Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • BUILD_ID : Include the build ID in the location of the build output artifact.
        • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

    • name (string) --

      Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

      For example:

      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
      • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
    • packaging (string) --

      The type of build output artifact to create:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
        • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
    • overrideArtifactName (boolean) --

      If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

    • encryptionDisabled (boolean) --

      Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

    • artifactIdentifier (string) --

      An identifier for this artifact definition.

  • secondaryArtifacts (list) --

    An array of ProjectArtifacts objects.

    • (dict) --

      Information about the build output artifacts for the build project.

      • type (string) -- [REQUIRED]

        The type of build output artifact. Valid values include:

        • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

        Note

        The CODEPIPELINE type is not supported for secondaryArtifacts .

        • NO_ARTIFACTS : The build project does not produce any build output.
        • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
      • location (string) --

        Information about the build output artifact location:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output bucket.
      • path (string) --

        Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

        For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

      • namespaceType (string) --

        Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • BUILD_ID : Include the build ID in the location of the build output artifact.
          • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

        For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

      • name (string) --

        Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

        For example:

        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
        • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
      • packaging (string) --

        The type of build output artifact to create:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
          • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
      • overrideArtifactName (boolean) --

        If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

      • encryptionDisabled (boolean) --

        Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

      • artifactIdentifier (string) --

        An identifier for this artifact definition.

  • cache (dict) --

    Stores recently used information so that it can be quickly accessed at a later time.

    • type (string) -- [REQUIRED]

      The type of cache used by the build project. Valid values include:

      • NO_CACHE : The build project does not use any cache.
      • S3 : The build project reads and writes from and to S3.
      • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
    • location (string) --

      Information about the cache location:

      • NO_CACHE or LOCAL : This value is ignored.
      • S3 : This is the S3 bucket name/prefix.
    • modes (list) --

      If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

      • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
      • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

      Note

      • You can use a Docker layer cache in the Linux environment only.
      • The privileged flag must be set so that your project has the required Docker permissions.
      • You should consider the security implications before you use a Docker layer cache.
      • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
        • Only directories can be specified for caching. You cannot specify individual files.
        • Symlinks are used to reference cached directories.
        • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
      • (string) --
  • environment (dict) --

    [REQUIRED]

    Information about the build environment for the build project.

    • type (string) -- [REQUIRED]

      The type of build environment to use for related builds.

      • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
      • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
      • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
    • image (string) -- [REQUIRED]

      The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

      • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
      • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
    • computeType (string) -- [REQUIRED]

      Information about the compute resources the build project uses. Available values include:

      • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
      • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

      If you use BUILD_GENERAL1_LARGE :

      • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
      • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
      • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

      For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

    • environmentVariables (list) --

      A set of environment variables to make available to builds for this build project.

      • (dict) --

        Information about an environment variable for a build project or a build.

        • name (string) -- [REQUIRED]

          The name or key of the environment variable.

        • value (string) -- [REQUIRED]

          The value of the environment variable.

          Warning

          We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

        • type (string) --

          The type of environment variable. Valid values include:

    • privilegedMode (boolean) --

      Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

      You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

      If the operating system's base image is Ubuntu Linux:

      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

      - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

      If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

      - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

    • certificate (string) --

      The certificate to use with this build project.

    • registryCredential (dict) --

      The credentials for access to a private registry.

      • credential (string) -- [REQUIRED]

        The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

        Note

        The credential can use the name of the credentials only if they exist in your current AWS Region.

      • credentialProvider (string) -- [REQUIRED]

        The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

    • imagePullCredentialsType (string) --

      The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

      • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
      • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

      When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

  • serviceRole (string) --

    [REQUIRED]

    The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

  • timeoutInMinutes (integer) -- How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before it times out any build that has not been marked as completed. The default is 60 minutes.
  • queuedTimeoutInMinutes (integer) -- The number of minutes a build is allowed to be queued before it times out.
  • encryptionKey (string) --

    The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

    Note

    You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

    You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

  • tags (list) --

    A list of tag key and value pairs associated with this build project.

    These tags are available for use by AWS services that support AWS CodeBuild build project tags.

    • (dict) --

      A tag, consisting of a key and a value.

      This tag is available for use by AWS services that support tags in AWS CodeBuild.

      • key (string) --

        The tag's key.

      • value (string) --

        The tag's value.

  • vpcConfig (dict) --

    VpcConfig enables AWS CodeBuild to access resources in an Amazon VPC.

    • vpcId (string) --

      The ID of the Amazon VPC.

    • subnets (list) --

      A list of one or more subnet IDs in your Amazon VPC.

      • (string) --
    • securityGroupIds (list) --

      A list of one or more security groups IDs in your Amazon VPC.

      • (string) --
  • badgeEnabled (boolean) -- Set this to true to generate a publicly accessible URL for your project's build badge.
  • logsConfig (dict) --

    Information about logs for the build project. These can be logs in Amazon CloudWatch Logs, logs uploaded to a specified S3 bucket, or both.

    • cloudWatchLogs (dict) --

      Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

        • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
        • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
      • groupName (string) --

        The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

      • streamName (string) --

        The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

    • s3Logs (dict) --

      Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the S3 build logs. Valid values are:

        • ENABLED : S3 build logs are enabled for this build project.
        • DISABLED : S3 build logs are not enabled for this build project.
      • location (string) --

        The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

      • encryptionDisabled (boolean) --

        Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

  • fileSystemLocations (list) --

    An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

    • (dict) --

      Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

      • type (string) --

        The type of the file system. The one supported type is EFS .

      • location (string) --

        A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

        The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

      • mountPoint (string) --

        The location in the container where you mount the file system.

      • identifier (string) --

        The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

        The identifier is used to mount your file system.

      • mountOptions (string) --

        The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

Return type

dict

Returns

Response Syntax

{
    'project': {
        'name': 'string',
        'arn': 'string',
        'description': 'string',
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
        'secondarySources': [
            {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
        ],
        'sourceVersion': 'string',
        'secondarySourceVersions': [
            {
                'sourceIdentifier': 'string',
                'sourceVersion': 'string'
            },
        ],
        'artifacts': {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
        'secondaryArtifacts': [
            {
                'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
                'location': 'string',
                'path': 'string',
                'namespaceType': 'NONE'|'BUILD_ID',
                'name': 'string',
                'packaging': 'NONE'|'ZIP',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
        ],
        'cache': {
            'type': 'NO_CACHE'|'S3'|'LOCAL',
            'location': 'string',
            'modes': [
                'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
            ]
        },
        'environment': {
            'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string',
                    'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                },
            ],
            'privilegedMode': True|False,
            'certificate': 'string',
            'registryCredential': {
                'credential': 'string',
                'credentialProvider': 'SECRETS_MANAGER'
            },
            'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
        },
        'serviceRole': 'string',
        'timeoutInMinutes': 123,
        'queuedTimeoutInMinutes': 123,
        'encryptionKey': 'string',
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ],
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1),
        'webhook': {
            'url': 'string',
            'payloadUrl': 'string',
            'secret': 'string',
            'branchFilter': 'string',
            'filterGroups': [
                [
                    {
                        'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                        'pattern': 'string',
                        'excludeMatchedPattern': True|False
                    },
                ],
            ],
            'lastModifiedSecret': datetime(2015, 1, 1)
        },
        'vpcConfig': {
            'vpcId': 'string',
            'subnets': [
                'string',
            ],
            'securityGroupIds': [
                'string',
            ]
        },
        'badge': {
            'badgeEnabled': True|False,
            'badgeRequestUrl': 'string'
        },
        'logsConfig': {
            'cloudWatchLogs': {
                'status': 'ENABLED'|'DISABLED',
                'groupName': 'string',
                'streamName': 'string'
            },
            's3Logs': {
                'status': 'ENABLED'|'DISABLED',
                'location': 'string',
                'encryptionDisabled': True|False
            }
        },
        'fileSystemLocations': [
            {
                'type': 'EFS',
                'location': 'string',
                'mountPoint': 'string',
                'identifier': 'string',
                'mountOptions': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    • project (dict) --

      Information about the build project that was created.

      • name (string) --

        The name of the build project.

      • arn (string) --

        The Amazon Resource Name (ARN) of the build project.

      • description (string) --

        A description that makes the build project easy to identify.

      • source (dict) --

        Information about the build input source code for this build project.

        • type (string) --

          The type of repository that contains the source code to be built. Valid values include:

          • BITBUCKET : The source code is in a Bitbucket repository.
          • CODECOMMIT : The source code is in an AWS CodeCommit repository.
          • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
          • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
          • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
          • NO_SOURCE : The project does not have input source code.
          • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
        • location (string) --

          Information about the location of the source code to be built. Valid values include:

          • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
          • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
          • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
            • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
            • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
          • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • gitCloneDepth (integer) --

          Information about the Git clone depth for the build project.

        • gitSubmodulesConfig (dict) --

          Information about the Git submodules configuration for the build project.

          • fetchSubmodules (boolean) --

            Set to true to fetch Git submodules for your AWS CodeBuild build project.

        • buildspec (string) --

          The buildspec file declaration to use for the builds in this build project.

          If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

        • auth (dict) --

          Information about the authorization settings for AWS CodeBuild to access the source code to be built.

          This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

          • type (string) --

            Note

            This data type is deprecated and is no longer accurate or used.

            The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

          • resource (string) --

            The resource value that applies to the specified authorization type.

        • reportBuildStatus (boolean) --

          Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

          Note

          The status of a build triggered by a webhook is always reported to your source provider.

        • buildStatusConfig (dict) --

          Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

          • context (string) --

            Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • targetUrl (string) --

            Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • insecureSsl (boolean) --

          Enable this flag to ignore SSL warnings while connecting to the project source code.

        • sourceIdentifier (string) --

          An identifier for this project source.

      • secondarySources (list) --

        An array of ProjectSource objects.

        • (dict) --

          Information about the build input source code for the build project.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

      • sourceVersion (string) --

        A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

        If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • secondarySourceVersions (list) --

        An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).

        • (dict) --

          A source identifier and its corresponding version.

          • sourceIdentifier (string) --

            An identifier for a source in the build project.

          • sourceVersion (string) --

            The source version for the corresponding source identifier. If specified, must be one of:

            • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
            • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

            For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • artifacts (dict) --

        Information about the build output artifacts for the build project.

        • type (string) --

          The type of build output artifact. Valid values include:

          • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

          Note

          The CODEPIPELINE type is not supported for secondaryArtifacts .

          • NO_ARTIFACTS : The build project does not produce any build output.
          • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
        • location (string) --

          Information about the build output artifact location:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the name of the output bucket.
        • path (string) --

          Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

          For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

        • namespaceType (string) --

          Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , valid values include:
            • BUILD_ID : Include the build ID in the location of the build output artifact.
            • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

          For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

        • name (string) --

          Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

          For example:

          • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
          • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
          • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
        • packaging (string) --

          The type of build output artifact to create:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , valid values include:
            • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
            • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
        • overrideArtifactName (boolean) --

          If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

        • encryptionDisabled (boolean) --

          Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

        • artifactIdentifier (string) --

          An identifier for this artifact definition.

      • secondaryArtifacts (list) --

        An array of ProjectArtifacts objects.

        • (dict) --

          Information about the build output artifacts for the build project.

          • type (string) --

            The type of build output artifact. Valid values include:

            • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

            Note

            The CODEPIPELINE type is not supported for secondaryArtifacts .

            • NO_ARTIFACTS : The build project does not produce any build output.
            • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
          • location (string) --

            Information about the build output artifact location:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output bucket.
          • path (string) --

            Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

            For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

          • namespaceType (string) --

            Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • BUILD_ID : Include the build ID in the location of the build output artifact.
              • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

            For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

          • name (string) --

            Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

            For example:

            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
            • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
          • packaging (string) --

            The type of build output artifact to create:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
              • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

      • cache (dict) --

        Information about the cache for the build project.

        • type (string) --

          The type of cache used by the build project. Valid values include:

          • NO_CACHE : The build project does not use any cache.
          • S3 : The build project reads and writes from and to S3.
          • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
        • location (string) --

          Information about the cache location:

          • NO_CACHE or LOCAL : This value is ignored.
          • S3 : This is the S3 bucket name/prefix.
        • modes (list) --

          If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

          • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
          • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

          Note

          • You can use a Docker layer cache in the Linux environment only.
          • The privileged flag must be set so that your project has the required Docker permissions.
          • You should consider the security implications before you use a Docker layer cache.
          • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
            • Only directories can be specified for caching. You cannot specify individual files.
            • Symlinks are used to reference cached directories.
            • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
          • (string) --
      • environment (dict) --

        Information about the build environment for this build project.

        • type (string) --

          The type of build environment to use for related builds.

          • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
          • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
          • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
        • image (string) --

          The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

          • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
          • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
        • computeType (string) --

          Information about the compute resources the build project uses. Available values include:

          • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
          • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
          • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
          • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

          If you use BUILD_GENERAL1_LARGE :

          • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
          • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
          • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

          For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

        • environmentVariables (list) --

          A set of environment variables to make available to builds for this build project.

          • (dict) --

            Information about an environment variable for a build project or a build.

            • name (string) --

              The name or key of the environment variable.

            • value (string) --

              The value of the environment variable.

              Warning

              We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

            • type (string) --

              The type of environment variable. Valid values include:

        • privilegedMode (boolean) --

          Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

          You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

          If the operating system's base image is Ubuntu Linux:

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

          If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

        • certificate (string) --

          The certificate to use with this build project.

        • registryCredential (dict) --

          The credentials for access to a private registry.

          • credential (string) --

            The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

            Note

            The credential can use the name of the credentials only if they exist in your current AWS Region.

          • credentialProvider (string) --

            The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

        • imagePullCredentialsType (string) --

          The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

          • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
          • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

          When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

      • serviceRole (string) --

        The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

      • timeoutInMinutes (integer) --

        How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.

      • queuedTimeoutInMinutes (integer) --

        The number of minutes a build is allowed to be queued before it times out.

      • encryptionKey (string) --

        The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

        Note

        You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

        You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

      • tags (list) --

        A list of tag key and value pairs associated with this build project.

        These tags are available for use by AWS services that support AWS CodeBuild build project tags.

        • (dict) --

          A tag, consisting of a key and a value.

          This tag is available for use by AWS services that support tags in AWS CodeBuild.

          • key (string) --

            The tag's key.

          • value (string) --

            The tag's value.

      • created (datetime) --

        When the build project was created, expressed in Unix time format.

      • lastModified (datetime) --

        When the build project's settings were last modified, expressed in Unix time format.

      • webhook (dict) --

        Information about a webhook that connects repository events to a build project in AWS CodeBuild.

        • url (string) --

          The URL to the webhook.

        • payloadUrl (string) --

          The AWS CodeBuild endpoint where webhook events are sent.

        • secret (string) --

          The secret token of the associated repository.

          Note

          A Bitbucket webhook does not support secret .

        • branchFilter (string) --

          A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

          Note

          It is recommended that you use filterGroups instead of branchFilter .

        • filterGroups (list) --

          An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

          For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

          • (list) --

            • (dict) --

              A filter used to determine which webhooks trigger a build.

              • type (string) --

                The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

                EVENT

                A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

                Note

                The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

                ACTOR_ACCOUNT_ID

                A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

                HEAD_REF

                A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

                Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

                BASE_REF

                A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

                Note

                Works with pull request events only.

                FILE_PATH

                A webhook triggers a build when the path of a changed file matches the regular expression pattern .

                Note

                Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

                COMMIT_MESSAGE

                A webhook triggers a build when the head commit message matches the regular expression pattern .

                Note

                Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

              • pattern (string) --

                For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

                For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

              • excludeMatchedPattern (boolean) --

                Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

        • lastModifiedSecret (datetime) --

          A timestamp that indicates the last time a repository's secret token was modified.

      • vpcConfig (dict) --

        Information about the VPC configuration that AWS CodeBuild accesses.

        • vpcId (string) --

          The ID of the Amazon VPC.

        • subnets (list) --

          A list of one or more subnet IDs in your Amazon VPC.

          • (string) --
        • securityGroupIds (list) --

          A list of one or more security groups IDs in your Amazon VPC.

          • (string) --
      • badge (dict) --

        Information about the build badge for the build project.

        • badgeEnabled (boolean) --

          Set this to true to generate a publicly accessible URL for your project's build badge.

        • badgeRequestUrl (string) --

          The publicly-accessible URL through which you can access the build badge for your project.

          The publicly accessible URL through which you can access the build badge for your project.

      • logsConfig (dict) --

        Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.

        • cloudWatchLogs (dict) --

          Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

          • status (string) --

            The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

            • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
            • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
          • groupName (string) --

            The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • streamName (string) --

            The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

        • s3Logs (dict) --

          Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

          • status (string) --

            The current status of the S3 build logs. Valid values are:

            • ENABLED : S3 build logs are enabled for this build project.
            • DISABLED : S3 build logs are not enabled for this build project.
          • location (string) --

            The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

          • encryptionDisabled (boolean) --

            Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

      • fileSystemLocations (list) --

        An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

        • (dict) --

          Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

          • type (string) --

            The type of the file system. The one supported type is EFS .

          • location (string) --

            A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

            The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

          • mountPoint (string) --

            The location in the container where you mount the file system.

          • identifier (string) --

            The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

            The identifier is used to mount your file system.

          • mountOptions (string) --

            The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceAlreadyExistsException
  • CodeBuild.Client.exceptions.AccountLimitExceededException
create_report_group(**kwargs)

Creates a report group. A report group contains a collection of reports.

See also: AWS API Documentation

Request Syntax

response = client.create_report_group(
    name='string',
    type='TEST',
    exportConfig={
        'exportConfigType': 'S3'|'NO_EXPORT',
        's3Destination': {
            'bucket': 'string',
            'path': 'string',
            'packaging': 'ZIP'|'NONE',
            'encryptionKey': 'string',
            'encryptionDisabled': True|False
        }
    },
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)
Parameters
  • name (string) --

    [REQUIRED]

    The name of the report group.

  • type (string) --

    [REQUIRED]

    The type of report group.

  • exportConfig (dict) --

    [REQUIRED]

    A ReportExportConfig object that contains information about where the report group test results are exported.

    • exportConfigType (string) --

      The export configuration type. Valid values are:

      • S3 : The report results are exported to an S3 bucket.
      • NO_EXPORT : The report results are not exported.
    • s3Destination (dict) --

      A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

      • bucket (string) --

        The name of the S3 bucket where the raw data of a report are exported.

      • path (string) --

        The path to the exported report's raw data results.

      • packaging (string) --

        The type of build output artifact to create. Valid values include:

        • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
        • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
      • encryptionKey (string) --

        The encryption key for the report's encrypted raw data.

      • encryptionDisabled (boolean) --

        A boolean value that specifies if the results of a report are encrypted.

  • tags (list) --

    A list of tag key and value pairs associated with this report group.

    These tags are available for use by AWS services that support AWS CodeBuild report group tags.

    • (dict) --

      A tag, consisting of a key and a value.

      This tag is available for use by AWS services that support tags in AWS CodeBuild.

      • key (string) --

        The tag's key.

      • value (string) --

        The tag's value.

Return type

dict

Returns

Response Syntax

{
    'reportGroup': {
        'arn': 'string',
        'name': 'string',
        'type': 'TEST',
        'exportConfig': {
            'exportConfigType': 'S3'|'NO_EXPORT',
            's3Destination': {
                'bucket': 'string',
                'path': 'string',
                'packaging': 'ZIP'|'NONE',
                'encryptionKey': 'string',
                'encryptionDisabled': True|False
            }
        },
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1),
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    • reportGroup (dict) --

      Information about the report group that was created.

      • arn (string) --

        The ARN of a ReportGroup .

      • name (string) --

        The name of a ReportGroup .

      • type (string) --

        The type of the ReportGroup . The one valid value is TEST .

      • exportConfig (dict) --

        Information about the destination where the raw data of this ReportGroup is exported.

        • exportConfigType (string) --

          The export configuration type. Valid values are:

          • S3 : The report results are exported to an S3 bucket.
          • NO_EXPORT : The report results are not exported.
        • s3Destination (dict) --

          A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

          • bucket (string) --

            The name of the S3 bucket where the raw data of a report are exported.

          • path (string) --

            The path to the exported report's raw data results.

          • packaging (string) --

            The type of build output artifact to create. Valid values include:

            • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
            • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
          • encryptionKey (string) --

            The encryption key for the report's encrypted raw data.

          • encryptionDisabled (boolean) --

            A boolean value that specifies if the results of a report are encrypted.

      • created (datetime) --

        The date and time this ReportGroup was created.

      • lastModified (datetime) --

        The date and time this ReportGroup was last modified.

      • tags (list) --

        A list of tag key and value pairs associated with this report group.

        These tags are available for use by AWS services that support AWS CodeBuild report group tags.

        • (dict) --

          A tag, consisting of a key and a value.

          This tag is available for use by AWS services that support tags in AWS CodeBuild.

          • key (string) --

            The tag's key.

          • value (string) --

            The tag's value.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceAlreadyExistsException
  • CodeBuild.Client.exceptions.AccountLimitExceededException
create_webhook(**kwargs)

For an existing AWS CodeBuild build project that has its source code stored in a GitHub or Bitbucket repository, enables AWS CodeBuild to start rebuilding the source code every time a code change is pushed to the repository.

Warning

If you enable webhooks for an AWS CodeBuild project, and the project is used as a build step in AWS CodePipeline, then two identical builds are created for each commit. One build is triggered through webhooks, and one through AWS CodePipeline. Because billing is on a per-build basis, you are billed for both builds. Therefore, if you are using AWS CodePipeline, we recommend that you disable webhooks in AWS CodeBuild. In the AWS CodeBuild console, clear the Webhook box. For more information, see step 5 in Change a Build Project's Settings .

See also: AWS API Documentation

Request Syntax

response = client.create_webhook(
    projectName='string',
    branchFilter='string',
    filterGroups=[
        [
            {
                'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                'pattern': 'string',
                'excludeMatchedPattern': True|False
            },
        ],
    ]
)
Parameters
  • projectName (string) --

    [REQUIRED]

    The name of the AWS CodeBuild project.

  • branchFilter (string) --

    A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

    Note

    It is recommended that you use filterGroups instead of branchFilter .

  • filterGroups (list) --

    An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

    For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

    • (list) --
      • (dict) --

        A filter used to determine which webhooks trigger a build.

        • type (string) -- [REQUIRED]

          The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

          EVENT

          A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

          Note

          The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

          ACTOR_ACCOUNT_ID

          A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

          HEAD_REF

          A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

          Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

          BASE_REF

          A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

          Note

          Works with pull request events only.

          FILE_PATH

          A webhook triggers a build when the path of a changed file matches the regular expression pattern .

          Note

          Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

          COMMIT_MESSAGE

          A webhook triggers a build when the head commit message matches the regular expression pattern .

          Note

          Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

        • pattern (string) -- [REQUIRED]

          For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

          For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

        • excludeMatchedPattern (boolean) --

          Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

Return type

dict

Returns

Response Syntax

{
    'webhook': {
        'url': 'string',
        'payloadUrl': 'string',
        'secret': 'string',
        'branchFilter': 'string',
        'filterGroups': [
            [
                {
                    'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                    'pattern': 'string',
                    'excludeMatchedPattern': True|False
                },
            ],
        ],
        'lastModifiedSecret': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • webhook (dict) --

      Information about a webhook that connects repository events to a build project in AWS CodeBuild.

      • url (string) --

        The URL to the webhook.

      • payloadUrl (string) --

        The AWS CodeBuild endpoint where webhook events are sent.

      • secret (string) --

        The secret token of the associated repository.

        Note

        A Bitbucket webhook does not support secret .

      • branchFilter (string) --

        A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

        Note

        It is recommended that you use filterGroups instead of branchFilter .

      • filterGroups (list) --

        An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

        For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

        • (list) --

          • (dict) --

            A filter used to determine which webhooks trigger a build.

            • type (string) --

              The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

              EVENT

              A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

              Note

              The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

              ACTOR_ACCOUNT_ID

              A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

              HEAD_REF

              A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

              Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

              BASE_REF

              A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

              Note

              Works with pull request events only.

              FILE_PATH

              A webhook triggers a build when the path of a changed file matches the regular expression pattern .

              Note

              Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

              COMMIT_MESSAGE

              A webhook triggers a build when the head commit message matches the regular expression pattern .

              Note

              Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

            • pattern (string) --

              For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

              For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

            • excludeMatchedPattern (boolean) --

              Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

      • lastModifiedSecret (datetime) --

        A timestamp that indicates the last time a repository's secret token was modified.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.OAuthProviderException
  • CodeBuild.Client.exceptions.ResourceAlreadyExistsException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
delete_project(**kwargs)

Deletes a build project. When you delete a project, its builds are not deleted.

See also: AWS API Documentation

Request Syntax

response = client.delete_project(
    name='string'
)
Parameters
name (string) --

[REQUIRED]

The name of the build project.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
delete_report(**kwargs)

Deletes a report.

See also: AWS API Documentation

Request Syntax

response = client.delete_report(
    arn='string'
)
Parameters
arn (string) --

[REQUIRED]

The ARN of the report to delete.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
delete_report_group(**kwargs)
DeleteReportGroup : Deletes a report group. Before you delete a report group, you must delete its reports. Use ListReportsForReportGroup to get the reports in a report group. Use DeleteReport to delete the reports. If you call DeleteReportGroup for a report group that contains one or more reports, an exception is thrown.

See also: AWS API Documentation

Request Syntax

response = client.delete_report_group(
    arn='string'
)
Parameters
arn (string) --

[REQUIRED]

The ARN of the report group to delete.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
delete_resource_policy(**kwargs)

Deletes a resource policy that is identified by its resource ARN.

See also: AWS API Documentation

Request Syntax

response = client.delete_resource_policy(
    resourceArn='string'
)
Parameters
resourceArn (string) --

[REQUIRED]

The ARN of the resource that is associated with the resource policy.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
delete_source_credentials(**kwargs)

Deletes a set of GitHub, GitHub Enterprise, or Bitbucket source credentials.

See also: AWS API Documentation

Request Syntax

response = client.delete_source_credentials(
    arn='string'
)
Parameters
arn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the token.

Return type
dict
Returns
Response Syntax
{
    'arn': 'string'
}

Response Structure

  • (dict) --
    • arn (string) --

      The Amazon Resource Name (ARN) of the token.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
delete_webhook(**kwargs)

For an existing AWS CodeBuild build project that has its source code stored in a GitHub or Bitbucket repository, stops AWS CodeBuild from rebuilding the source code every time a code change is pushed to the repository.

See also: AWS API Documentation

Request Syntax

response = client.delete_webhook(
    projectName='string'
)
Parameters
projectName (string) --

[REQUIRED]

The name of the AWS CodeBuild project.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
  • CodeBuild.Client.exceptions.OAuthProviderException
describe_test_cases(**kwargs)

Returns a list of details about test cases for a report.

See also: AWS API Documentation

Request Syntax

response = client.describe_test_cases(
    reportArn='string',
    nextToken='string',
    maxResults=123,
    filter={
        'status': 'string'
    }
)
Parameters
  • reportArn (string) --

    [REQUIRED]

    The ARN of the report for which test cases are returned.

  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
  • maxResults (integer) -- The maximum number of paginated test cases returned per response. Use nextToken to iterate pages in the list of returned TestCase objects. The default value is 100.
  • filter (dict) --

    A TestCaseFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter test cases. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN . A TestCaseFilter can have one status.

Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'testCases': [
        {
            'reportArn': 'string',
            'testRawDataPath': 'string',
            'prefix': 'string',
            'name': 'string',
            'status': 'string',
            'durationInNanoSeconds': 123,
            'message': 'string',
            'expired': datetime(2015, 1, 1)
        },
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • testCases (list) --

      The returned list of test cases.

      • (dict) --

        Information about a test case created using a framework such as NUnit or Cucumber. A test case might be a unit test or a configuration test.

        • reportArn (string) --

          The ARN of the report to which the test case belongs.

        • testRawDataPath (string) --

          The path to the raw data file that contains the test result.

        • prefix (string) --

          A string that is applied to a series of related test cases. CodeBuild generates the prefix. The prefix depends on the framework used to generate the tests.

        • name (string) --

          The name of the test case.

        • status (string) --

          The status returned by the test case after it was run. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN .

        • durationInNanoSeconds (integer) --

          The number of nanoseconds it took to run this test case.

        • message (string) --

          A message associated with a test case. For example, an error message or stack trace.

        • expired (datetime) --

          The date and time a test case expires. A test case expires 30 days after it is created. An expired test case is not available to view in CodeBuild.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_resource_policy(**kwargs)

Gets a resource policy that is identified by its resource ARN.

See also: AWS API Documentation

Request Syntax

response = client.get_resource_policy(
    resourceArn='string'
)
Parameters
resourceArn (string) --

[REQUIRED]

The ARN of the resource that is associated with the resource policy.

Return type
dict
Returns
Response Syntax
{
    'policy': 'string'
}

Response Structure

  • (dict) --
    • policy (string) --

      The resource policy for the resource identified by the input ARN parameter.

Exceptions

  • CodeBuild.Client.exceptions.ResourceNotFoundException
  • CodeBuild.Client.exceptions.InvalidInputException
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
import_source_credentials(**kwargs)

Imports the source repository credentials for an AWS CodeBuild project that has its source code stored in a GitHub, GitHub Enterprise, or Bitbucket repository.

See also: AWS API Documentation

Request Syntax

response = client.import_source_credentials(
    username='string',
    token='string',
    serverType='GITHUB'|'BITBUCKET'|'GITHUB_ENTERPRISE',
    authType='OAUTH'|'BASIC_AUTH'|'PERSONAL_ACCESS_TOKEN',
    shouldOverwrite=True|False
)
Parameters
  • username (string) -- The Bitbucket username when the authType is BASIC_AUTH. This parameter is not valid for other types of source providers or connections.
  • token (string) --

    [REQUIRED]

    For GitHub or GitHub Enterprise, this is the personal access token. For Bitbucket, this is the app password.

  • serverType (string) --

    [REQUIRED]

    The source provider used for this project.

  • authType (string) --

    [REQUIRED]

    The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API and must be created using the AWS CodeBuild console.

  • shouldOverwrite (boolean) -- Set to false to prevent overwriting the repository source credentials. Set to true to overwrite the repository source credentials. The default value is true .
Return type

dict

Returns

Response Syntax

{
    'arn': 'string'
}

Response Structure

  • (dict) --

    • arn (string) --

      The Amazon Resource Name (ARN) of the token.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.AccountLimitExceededException
  • CodeBuild.Client.exceptions.ResourceAlreadyExistsException
invalidate_project_cache(**kwargs)

Resets the cache for a project.

See also: AWS API Documentation

Request Syntax

response = client.invalidate_project_cache(
    projectName='string'
)
Parameters
projectName (string) --

[REQUIRED]

The name of the AWS CodeBuild build project that the cache is reset for.

Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
list_builds(**kwargs)

Gets a list of build IDs, with each build ID representing a single build.

See also: AWS API Documentation

Request Syntax

response = client.list_builds(
    sortOrder='ASCENDING'|'DESCENDING',
    nextToken='string'
)
Parameters
  • sortOrder (string) --

    The order to list build IDs. Valid values include:

    • ASCENDING : List the build IDs in ascending order by build ID.
    • DESCENDING : List the build IDs in descending order by build ID.
  • nextToken (string) -- During a previous call, if there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
Return type

dict

Returns

Response Syntax

{
    'ids': [
        'string',
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • ids (list) --

      A list of build IDs, with each build ID representing a single build.

      • (string) --
    • nextToken (string) --

      If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_builds_for_project(**kwargs)

Gets a list of build IDs for the specified build project, with each build ID representing a single build.

See also: AWS API Documentation

Request Syntax

response = client.list_builds_for_project(
    projectName='string',
    sortOrder='ASCENDING'|'DESCENDING',
    nextToken='string'
)
Parameters
  • projectName (string) --

    [REQUIRED]

    The name of the AWS CodeBuild project.

  • sortOrder (string) --

    The order to list build IDs. Valid values include:

    • ASCENDING : List the build IDs in ascending order by build ID.
    • DESCENDING : List the build IDs in descending order by build ID.
  • nextToken (string) -- During a previous call, if there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
Return type

dict

Returns

Response Syntax

{
    'ids': [
        'string',
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • ids (list) --

      A list of build IDs for the specified build project, with each build ID representing a single build.

      • (string) --
    • nextToken (string) --

      If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
list_curated_environment_images()

Gets information about Docker images that are managed by AWS CodeBuild.

See also: AWS API Documentation

Request Syntax

response = client.list_curated_environment_images()
Return type
dict
Returns
Response Syntax
{
    'platforms': [
        {
            'platform': 'DEBIAN'|'AMAZON_LINUX'|'UBUNTU'|'WINDOWS_SERVER',
            'languages': [
                {
                    'language': 'JAVA'|'PYTHON'|'NODE_JS'|'RUBY'|'GOLANG'|'DOCKER'|'ANDROID'|'DOTNET'|'BASE'|'PHP',
                    'images': [
                        {
                            'name': 'string',
                            'description': 'string',
                            'versions': [
                                'string',
                            ]
                        },
                    ]
                },
            ]
        },
    ]
}

Response Structure

  • (dict) --
    • platforms (list) --

      Information about supported platforms for Docker images that are managed by AWS CodeBuild.

      • (dict) --

        A set of Docker images that are related by platform and are managed by AWS CodeBuild.

        • platform (string) --

          The platform's name.

        • languages (list) --

          The list of programming languages that are available for the specified platform.

          • (dict) --

            A set of Docker images that are related by programming language and are managed by AWS CodeBuild.

            • language (string) --

              The programming language for the Docker images.

            • images (list) --

              The list of Docker images that are related by the specified programming language.

              • (dict) --

                Information about a Docker image that is managed by AWS CodeBuild.

                • name (string) --

                  The name of the Docker image.

                • description (string) --

                  The description of the Docker image.

                • versions (list) --

                  A list of environment image versions.

                  • (string) --
list_projects(**kwargs)

Gets a list of build project names, with each build project name representing a single build project.

See also: AWS API Documentation

Request Syntax

response = client.list_projects(
    sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
    sortOrder='ASCENDING'|'DESCENDING',
    nextToken='string'
)
Parameters
  • sortBy (string) --

    The criterion to be used to list build project names. Valid values include:

    • CREATED_TIME : List based on when each build project was created.
    • LAST_MODIFIED_TIME : List based on when information about each build project was last changed.
    • NAME : List based on each build project's name.

    Use sortOrder to specify in what order to list the build project names based on the preceding criteria.

  • sortOrder (string) --

    The order in which to list build projects. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.

    Use sortBy to specify the criterion to be used to list build project names.

  • nextToken (string) -- During a previous call, if there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'projects': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.

    • projects (list) --

      The list of build project names, with each build project name representing a single build project.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_report_groups(**kwargs)

Gets a list ARNs for the report groups in the current AWS account.

See also: AWS API Documentation

Request Syntax

response = client.list_report_groups(
    sortOrder='ASCENDING'|'DESCENDING',
    sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
    nextToken='string',
    maxResults=123
)
Parameters
  • sortOrder (string) -- Used to specify the order to sort the list of returned report groups. Valid values are ASCENDING and DESCENDING .
  • sortBy (string) --

    The criterion to be used to list build report groups. Valid values include:

    • CREATED_TIME : List based on when each report group was created.
    • LAST_MODIFIED_TIME : List based on when each report group was last changed.
    • NAME : List based on each report group's name.
  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
  • maxResults (integer) -- The maximum number of paginated report groups returned per response. Use nextToken to iterate pages in the list of returned ReportGroup objects. The default value is 100.
Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'reportGroups': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • reportGroups (list) --

      The list of ARNs for the report groups in the current AWS account.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_reports(**kwargs)

Returns a list of ARNs for the reports in the current AWS account.

See also: AWS API Documentation

Request Syntax

response = client.list_reports(
    sortOrder='ASCENDING'|'DESCENDING',
    nextToken='string',
    maxResults=123,
    filter={
        'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
    }
)
Parameters
  • sortOrder (string) --

    Specifies the sort order for the list of returned reports. Valid values are:

    • ASCENDING : return reports in chronological order based on their creation date.
    • DESCENDING : return reports in the reverse chronological order based on their creation date.
  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
  • maxResults (integer) -- The maximum number of paginated reports returned per response. Use nextToken to iterate pages in the list of returned Report objects. The default value is 100.
  • filter (dict) --

    A ReportFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter reports. You can filter using one status only.

Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'reports': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • reports (list) --

      The list of returned ARNs for the reports in the current AWS account.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_reports_for_report_group(**kwargs)

Returns a list of ARNs for the reports that belong to a ReportGroup .

See also: AWS API Documentation

Request Syntax

response = client.list_reports_for_report_group(
    reportGroupArn='string',
    nextToken='string',
    sortOrder='ASCENDING'|'DESCENDING',
    maxResults=123,
    filter={
        'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
    }
)
Parameters
  • reportGroupArn (string) --

    [REQUIRED]

    The ARN of the report group for which you want to return report ARNs.

  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
  • sortOrder (string) -- Use to specify whether the results are returned in ascending or descending order.
  • maxResults (integer) -- The maximum number of paginated reports in this report group returned per response. Use nextToken to iterate pages in the list of returned Report objects. The default value is 100.
  • filter (dict) --

    A ReportFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter reports. You can filter using one status only.

Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'reports': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • reports (list) --

      The list of report ARNs.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
list_shared_projects(**kwargs)

Gets a list of projects that are shared with other AWS accounts or users.

See also: AWS API Documentation

Request Syntax

response = client.list_shared_projects(
    sortBy='ARN'|'MODIFIED_TIME',
    sortOrder='ASCENDING'|'DESCENDING',
    maxResults=123,
    nextToken='string'
)
Parameters
  • sortBy (string) --

    The criterion to be used to list build projects shared with the current AWS account or user. Valid values include:

    • ARN : List based on the ARN.
    • MODIFIED_TIME : List based on when information about the shared project was last changed.
  • sortOrder (string) --

    The order in which to list shared build projects. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.
  • maxResults (integer) -- The maximum number of paginated shared build projects returned per response. Use nextToken to iterate pages in the list of returned Project objects. The default value is 100.
  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'projects': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • projects (list) --

      The list of ARNs for the build projects shared with the current AWS account or user.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_shared_report_groups(**kwargs)

Gets a list of report groups that are shared with other AWS accounts or users.

See also: AWS API Documentation

Request Syntax

response = client.list_shared_report_groups(
    sortOrder='ASCENDING'|'DESCENDING',
    sortBy='ARN'|'MODIFIED_TIME',
    nextToken='string',
    maxResults=123
)
Parameters
  • sortOrder (string) --

    The order in which to list shared report groups. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.
  • sortBy (string) --

    The criterion to be used to list report groups shared with the current AWS account or user. Valid values include:

    • ARN : List based on the ARN.
    • MODIFIED_TIME : List based on when information about the shared report group was last changed.
  • nextToken (string) -- During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
  • maxResults (integer) -- The maximum number of paginated shared report groups per response. Use nextToken to iterate pages in the list of returned ReportGroup objects. The default value is 100.
Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'reportGroups': [
        'string',
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.

    • reportGroups (list) --

      The list of ARNs for the report groups shared with the current AWS account or user.

      • (string) --

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
list_source_credentials()

Returns a list of SourceCredentialsInfo objects.

See also: AWS API Documentation

Request Syntax

response = client.list_source_credentials()
Return type
dict
Returns
Response Syntax
{
    'sourceCredentialsInfos': [
        {
            'arn': 'string',
            'serverType': 'GITHUB'|'BITBUCKET'|'GITHUB_ENTERPRISE',
            'authType': 'OAUTH'|'BASIC_AUTH'|'PERSONAL_ACCESS_TOKEN'
        },
    ]
}

Response Structure

  • (dict) --
    • sourceCredentialsInfos (list) --

      A list of SourceCredentialsInfo objects. Each SourceCredentialsInfo object includes the authentication type, token ARN, and type of source provider for one set of credentials.

      • (dict) --

        Information about the credentials for a GitHub, GitHub Enterprise, or Bitbucket repository.

        • arn (string) --

          The Amazon Resource Name (ARN) of the token.

        • serverType (string) --

          The type of source provider. The valid options are GITHUB, GITHUB_ENTERPRISE, or BITBUCKET.

        • authType (string) --

          The type of authentication used by the credentials. Valid options are OAUTH, BASIC_AUTH, or PERSONAL_ACCESS_TOKEN.

put_resource_policy(**kwargs)

Stores a resource policy for the ARN of a Project or ReportGroup object.

See also: AWS API Documentation

Request Syntax

response = client.put_resource_policy(
    policy='string',
    resourceArn='string'
)
Parameters
  • policy (string) --

    [REQUIRED]

    A JSON-formatted resource policy. For more information, see Sharing a Project and Sharing a Report Group in the AWS CodeBuild User Guide .

  • resourceArn (string) --

    [REQUIRED]

    The ARN of the Project or ReportGroup resource you want to associate with a resource policy.

Return type

dict

Returns

Response Syntax

{
    'resourceArn': 'string'
}

Response Structure

  • (dict) --

    • resourceArn (string) --

      The ARN of the Project or ReportGroup resource that is associated with a resource policy.

Exceptions

  • CodeBuild.Client.exceptions.ResourceNotFoundException
  • CodeBuild.Client.exceptions.InvalidInputException
start_build(**kwargs)

Starts running a build.

See also: AWS API Documentation

Request Syntax

response = client.start_build(
    projectName='string',
    secondarySourcesOverride=[
        {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
    ],
    secondarySourcesVersionOverride=[
        {
            'sourceIdentifier': 'string',
            'sourceVersion': 'string'
        },
    ],
    sourceVersion='string',
    artifactsOverride={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP',
        'overrideArtifactName': True|False,
        'encryptionDisabled': True|False,
        'artifactIdentifier': 'string'
    },
    secondaryArtifactsOverride=[
        {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
    ],
    environmentVariablesOverride=[
        {
            'name': 'string',
            'value': 'string',
            'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
        },
    ],
    sourceTypeOverride='CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
    sourceLocationOverride='string',
    sourceAuthOverride={
        'type': 'OAUTH',
        'resource': 'string'
    },
    gitCloneDepthOverride=123,
    gitSubmodulesConfigOverride={
        'fetchSubmodules': True|False
    },
    buildspecOverride='string',
    insecureSslOverride=True|False,
    reportBuildStatusOverride=True|False,
    buildStatusConfigOverride={
        'context': 'string',
        'targetUrl': 'string'
    },
    environmentTypeOverride='WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
    imageOverride='string',
    computeTypeOverride='BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
    certificateOverride='string',
    cacheOverride={
        'type': 'NO_CACHE'|'S3'|'LOCAL',
        'location': 'string',
        'modes': [
            'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
        ]
    },
    serviceRoleOverride='string',
    privilegedModeOverride=True|False,
    timeoutInMinutesOverride=123,
    queuedTimeoutInMinutesOverride=123,
    encryptionKeyOverride='string',
    idempotencyToken='string',
    logsConfigOverride={
        'cloudWatchLogs': {
            'status': 'ENABLED'|'DISABLED',
            'groupName': 'string',
            'streamName': 'string'
        },
        's3Logs': {
            'status': 'ENABLED'|'DISABLED',
            'location': 'string',
            'encryptionDisabled': True|False
        }
    },
    registryCredentialOverride={
        'credential': 'string',
        'credentialProvider': 'SECRETS_MANAGER'
    },
    imagePullCredentialsTypeOverride='CODEBUILD'|'SERVICE_ROLE',
    debugSessionEnabled=True|False
)
Parameters
  • projectName (string) --

    [REQUIRED]

    The name of the AWS CodeBuild build project to start running a build.

  • secondarySourcesOverride (list) --

    An array of ProjectSource objects.

    • (dict) --

      Information about the build input source code for the build project.

      • type (string) -- [REQUIRED]

        The type of repository that contains the source code to be built. Valid values include:

        • BITBUCKET : The source code is in a Bitbucket repository.
        • CODECOMMIT : The source code is in an AWS CodeCommit repository.
        • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
        • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
        • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
        • NO_SOURCE : The project does not have input source code.
        • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
      • location (string) --

        Information about the location of the source code to be built. Valid values include:

        • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
        • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
        • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
          • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
          • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
        • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
      • gitCloneDepth (integer) --

        Information about the Git clone depth for the build project.

      • gitSubmodulesConfig (dict) --

        Information about the Git submodules configuration for the build project.

        • fetchSubmodules (boolean) -- [REQUIRED]

          Set to true to fetch Git submodules for your AWS CodeBuild build project.

      • buildspec (string) --

        The buildspec file declaration to use for the builds in this build project.

        If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

      • auth (dict) --

        Information about the authorization settings for AWS CodeBuild to access the source code to be built.

        This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

        • type (string) -- [REQUIRED]

          Note

          This data type is deprecated and is no longer accurate or used.

          The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

        • resource (string) --

          The resource value that applies to the specified authorization type.

      • reportBuildStatus (boolean) --

        Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

        Note

        The status of a build triggered by a webhook is always reported to your source provider.

      • buildStatusConfig (dict) --

        Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

        • context (string) --

          Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • targetUrl (string) --

          Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

      • insecureSsl (boolean) --

        Enable this flag to ignore SSL warnings while connecting to the project source code.

      • sourceIdentifier (string) --

        An identifier for this project source.

  • secondarySourcesVersionOverride (list) --

    An array of ProjectSourceVersion objects that specify one or more versions of the project's secondary sources to be used for this build only.

    • (dict) --

      A source identifier and its corresponding version.

      • sourceIdentifier (string) -- [REQUIRED]

        An identifier for a source in the build project.

      • sourceVersion (string) -- [REQUIRED]

        The source version for the corresponding source identifier. If specified, must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • sourceVersion (string) --

    A version of the build input to be built, for this build only. If not specified, the latest version is used. If specified, must be one of:

    • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
    • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

    If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.

    For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • artifactsOverride (dict) --

    Build output artifact settings that override, for this build only, the latest ones already defined in the build project.

    • type (string) -- [REQUIRED]

      The type of build output artifact. Valid values include:

      • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

      Note

      The CODEPIPELINE type is not supported for secondaryArtifacts .

      • NO_ARTIFACTS : The build project does not produce any build output.
      • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
    • location (string) --

      Information about the build output artifact location:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output bucket.
    • path (string) --

      Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

      For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

    • namespaceType (string) --

      Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • BUILD_ID : Include the build ID in the location of the build output artifact.
        • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

    • name (string) --

      Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

      For example:

      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
      • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
    • packaging (string) --

      The type of build output artifact to create:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
        • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
    • overrideArtifactName (boolean) --

      If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

    • encryptionDisabled (boolean) --

      Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

    • artifactIdentifier (string) --

      An identifier for this artifact definition.

  • secondaryArtifactsOverride (list) --

    An array of ProjectArtifacts objects.

    • (dict) --

      Information about the build output artifacts for the build project.

      • type (string) -- [REQUIRED]

        The type of build output artifact. Valid values include:

        • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

        Note

        The CODEPIPELINE type is not supported for secondaryArtifacts .

        • NO_ARTIFACTS : The build project does not produce any build output.
        • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
      • location (string) --

        Information about the build output artifact location:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output bucket.
      • path (string) --

        Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

        For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

      • namespaceType (string) --

        Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • BUILD_ID : Include the build ID in the location of the build output artifact.
          • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

        For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

      • name (string) --

        Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

        For example:

        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
        • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
      • packaging (string) --

        The type of build output artifact to create:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
          • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
      • overrideArtifactName (boolean) --

        If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

      • encryptionDisabled (boolean) --

        Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

      • artifactIdentifier (string) --

        An identifier for this artifact definition.

  • environmentVariablesOverride (list) --

    A set of environment variables that overrides, for this build only, the latest ones already defined in the build project.

    • (dict) --

      Information about an environment variable for a build project or a build.

      • name (string) -- [REQUIRED]

        The name or key of the environment variable.

      • value (string) -- [REQUIRED]

        The value of the environment variable.

        Warning

        We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

      • type (string) --

        The type of environment variable. Valid values include:

  • sourceTypeOverride (string) -- A source input type, for this build, that overrides the source input defined in the build project.
  • sourceLocationOverride (string) -- A location that overrides, for this build, the source location for the one defined in the build project.
  • sourceAuthOverride (dict) --

    An authorization type for this build that overrides the one defined in the build project. This override applies only if the build project's source is BitBucket or GitHub.

    • type (string) -- [REQUIRED]

      Note

      This data type is deprecated and is no longer accurate or used.

      The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

    • resource (string) --

      The resource value that applies to the specified authorization type.

  • gitCloneDepthOverride (integer) -- The user-defined depth of history, with a minimum value of 0, that overrides, for this build only, any previous depth of history defined in the build project.
  • gitSubmodulesConfigOverride (dict) --

    Information about the Git submodules configuration for this build of an AWS CodeBuild build project.

    • fetchSubmodules (boolean) -- [REQUIRED]

      Set to true to fetch Git submodules for your AWS CodeBuild build project.

  • buildspecOverride (string) --

    A buildspec file declaration that overrides, for this build only, the latest one already defined in the build project.

    If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

  • insecureSslOverride (boolean) -- Enable this flag to override the insecure SSL setting that is specified in the build project. The insecure SSL setting determines whether to ignore SSL warnings while connecting to the project source code. This override applies only if the build's source is GitHub Enterprise.
  • reportBuildStatusOverride (boolean) --

    Set to true to report to your source provider the status of a build's start and completion. If you use this option with a source provider other than GitHub, GitHub Enterprise, or Bitbucket, an invalidInputException is thrown.

    Note

    The status of a build triggered by a webhook is always reported to your source provider.

  • buildStatusConfigOverride (dict) --

    Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

    • context (string) --

      Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

      Bitbucket

      This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

      GitHub/GitHub Enterprise Server

      This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

    • targetUrl (string) --

      Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

      Bitbucket

      This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

      GitHub/GitHub Enterprise Server

      This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

  • environmentTypeOverride (string) -- A container type for this build that overrides the one specified in the build project.
  • imageOverride (string) -- The name of an image for this build that overrides the one specified in the build project.
  • computeTypeOverride (string) -- The name of a compute type for this build that overrides the one specified in the build project.
  • certificateOverride (string) -- The name of a certificate for this build that overrides the one specified in the build project.
  • cacheOverride (dict) --

    A ProjectCache object specified for this build that overrides the one defined in the build project.

    • type (string) -- [REQUIRED]

      The type of cache used by the build project. Valid values include:

      • NO_CACHE : The build project does not use any cache.
      • S3 : The build project reads and writes from and to S3.
      • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
    • location (string) --

      Information about the cache location:

      • NO_CACHE or LOCAL : This value is ignored.
      • S3 : This is the S3 bucket name/prefix.
    • modes (list) --

      If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

      • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
      • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

      Note

      • You can use a Docker layer cache in the Linux environment only.
      • The privileged flag must be set so that your project has the required Docker permissions.
      • You should consider the security implications before you use a Docker layer cache.
      • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
        • Only directories can be specified for caching. You cannot specify individual files.
        • Symlinks are used to reference cached directories.
        • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
      • (string) --
  • serviceRoleOverride (string) -- The name of a service role for this build that overrides the one specified in the build project.
  • privilegedModeOverride (boolean) -- Enable this flag to override privileged mode in the build project.
  • timeoutInMinutesOverride (integer) -- The number of build timeout minutes, from 5 to 480 (8 hours), that overrides, for this build only, the latest setting already defined in the build project.
  • queuedTimeoutInMinutesOverride (integer) -- The number of minutes a build is allowed to be queued before it times out.
  • encryptionKeyOverride (string) --

    The AWS Key Management Service (AWS KMS) customer master key (CMK) that overrides the one specified in the build project. The CMK key encrypts the build output artifacts.

    Note

    You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

    You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

  • idempotencyToken (string) -- A unique, case sensitive identifier you provide to ensure the idempotency of the StartBuild request. The token is included in the StartBuild request and is valid for 5 minutes. If you repeat the StartBuild request with the same token, but change a parameter, AWS CodeBuild returns a parameter mismatch error.
  • logsConfigOverride (dict) --

    Log settings for this build that override the log settings defined in the build project.

    • cloudWatchLogs (dict) --

      Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

        • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
        • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
      • groupName (string) --

        The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

      • streamName (string) --

        The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

    • s3Logs (dict) --

      Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the S3 build logs. Valid values are:

        • ENABLED : S3 build logs are enabled for this build project.
        • DISABLED : S3 build logs are not enabled for this build project.
      • location (string) --

        The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

      • encryptionDisabled (boolean) --

        Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

  • registryCredentialOverride (dict) --

    The credentials for access to a private registry.

    • credential (string) -- [REQUIRED]

      The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

      Note

      The credential can use the name of the credentials only if they exist in your current AWS Region.

    • credentialProvider (string) -- [REQUIRED]

      The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

  • imagePullCredentialsTypeOverride (string) --

    The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

    • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
    • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

    When using a cross-account or private registry image, you must use SERVICE_ROLE credentials. When using an AWS CodeBuild curated image, you must use CODEBUILD credentials.

  • debugSessionEnabled (boolean) -- Specifies if session debugging is enabled for this build. For more information, see Viewing a running build in Session Manager .
Return type

dict

Returns

Response Syntax

{
    'build': {
        'id': 'string',
        'arn': 'string',
        'buildNumber': 123,
        'startTime': datetime(2015, 1, 1),
        'endTime': datetime(2015, 1, 1),
        'currentPhase': 'string',
        'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
        'sourceVersion': 'string',
        'resolvedSourceVersion': 'string',
        'projectName': 'string',
        'phases': [
            {
                'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                'startTime': datetime(2015, 1, 1),
                'endTime': datetime(2015, 1, 1),
                'durationInSeconds': 123,
                'contexts': [
                    {
                        'statusCode': 'string',
                        'message': 'string'
                    },
                ]
            },
        ],
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
        'secondarySources': [
            {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
        ],
        'secondarySourceVersions': [
            {
                'sourceIdentifier': 'string',
                'sourceVersion': 'string'
            },
        ],
        'artifacts': {
            'location': 'string',
            'sha256sum': 'string',
            'md5sum': 'string',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
        'secondaryArtifacts': [
            {
                'location': 'string',
                'sha256sum': 'string',
                'md5sum': 'string',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
        ],
        'cache': {
            'type': 'NO_CACHE'|'S3'|'LOCAL',
            'location': 'string',
            'modes': [
                'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
            ]
        },
        'environment': {
            'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string',
                    'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                },
            ],
            'privilegedMode': True|False,
            'certificate': 'string',
            'registryCredential': {
                'credential': 'string',
                'credentialProvider': 'SECRETS_MANAGER'
            },
            'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
        },
        'serviceRole': 'string',
        'logs': {
            'groupName': 'string',
            'streamName': 'string',
            'deepLink': 'string',
            's3DeepLink': 'string',
            'cloudWatchLogsArn': 'string',
            's3LogsArn': 'string',
            'cloudWatchLogs': {
                'status': 'ENABLED'|'DISABLED',
                'groupName': 'string',
                'streamName': 'string'
            },
            's3Logs': {
                'status': 'ENABLED'|'DISABLED',
                'location': 'string',
                'encryptionDisabled': True|False
            }
        },
        'timeoutInMinutes': 123,
        'queuedTimeoutInMinutes': 123,
        'buildComplete': True|False,
        'initiator': 'string',
        'vpcConfig': {
            'vpcId': 'string',
            'subnets': [
                'string',
            ],
            'securityGroupIds': [
                'string',
            ]
        },
        'networkInterface': {
            'subnetId': 'string',
            'networkInterfaceId': 'string'
        },
        'encryptionKey': 'string',
        'exportedEnvironmentVariables': [
            {
                'name': 'string',
                'value': 'string'
            },
        ],
        'reportArns': [
            'string',
        ],
        'fileSystemLocations': [
            {
                'type': 'EFS',
                'location': 'string',
                'mountPoint': 'string',
                'identifier': 'string',
                'mountOptions': 'string'
            },
        ],
        'debugSession': {
            'sessionEnabled': True|False,
            'sessionTarget': 'string'
        }
    }
}

Response Structure

  • (dict) --

    • build (dict) --

      Information about the build to be run.

      • id (string) --

        The unique ID for the build.

      • arn (string) --

        The Amazon Resource Name (ARN) of the build.

      • buildNumber (integer) --

        The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.

      • startTime (datetime) --

        When the build process started, expressed in Unix time format.

      • endTime (datetime) --

        When the build process ended, expressed in Unix time format.

      • currentPhase (string) --

        The current build phase.

      • buildStatus (string) --

        The current status of the build. Valid values include:

        • FAILED : The build failed.
        • FAULT : The build faulted.
        • IN_PROGRESS : The build is still in progress.
        • STOPPED : The build stopped.
        • SUCCEEDED : The build succeeded.
        • TIMED_OUT : The build timed out.
      • sourceVersion (string) --

        Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • resolvedSourceVersion (string) --

        An identifier for the version of this build's source code.

        • For AWS CodeCommit, GitHub, GitHub Enterprise, and BitBucket, the commit ID.
        • For AWS CodePipeline, the source revision provided by AWS CodePipeline.
        • For Amazon Simple Storage Service (Amazon S3), this does not apply.
      • projectName (string) --

        The name of the AWS CodeBuild project.

      • phases (list) --

        Information about all previous build phases that are complete and information about any current build phase that is not yet complete.

        • (dict) --

          Information about a stage for a build.

          • phaseType (string) --

            The name of the build phase. Valid values include:

            • BUILD : Core build activities typically occur in this build phase.
            • COMPLETED : The build has been completed.
            • DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
            • FINALIZING : The build process is completing in this build phase.
            • INSTALL : Installation activities typically occur in this build phase.
            • POST_BUILD : Post-build activities typically occur in this build phase.
            • PRE_BUILD : Pre-build activities typically occur in this build phase.
            • PROVISIONING : The build environment is being set up.
            • QUEUED : The build has been submitted and is queued behind other submitted builds.
            • SUBMITTED : The build has been submitted.
            • UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
          • phaseStatus (string) --

            The current status of the build phase. Valid values include:

            • FAILED : The build phase failed.
            • FAULT : The build phase faulted.
            • IN_PROGRESS : The build phase is still in progress.
            • QUEUED : The build has been submitted and is queued behind other submitted builds.
            • STOPPED : The build phase stopped.
            • SUCCEEDED : The build phase succeeded.
            • TIMED_OUT : The build phase timed out.
          • startTime (datetime) --

            When the build phase started, expressed in Unix time format.

          • endTime (datetime) --

            When the build phase ended, expressed in Unix time format.

          • durationInSeconds (integer) --

            How long, in seconds, between the starting and ending times of the build's phase.

          • contexts (list) --

            Additional information about a build phase, especially to help troubleshoot a failed build.

            • (dict) --

              Additional information about a build phase that has an error. You can use this information for troubleshooting.

              • statusCode (string) --

                The status code for the context of the build phase.

              • message (string) --

                An explanation of the build phase's context. This might include a command ID and an exit code.

      • source (dict) --

        Information about the source code to be built.

        • type (string) --

          The type of repository that contains the source code to be built. Valid values include:

          • BITBUCKET : The source code is in a Bitbucket repository.
          • CODECOMMIT : The source code is in an AWS CodeCommit repository.
          • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
          • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
          • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
          • NO_SOURCE : The project does not have input source code.
          • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
        • location (string) --

          Information about the location of the source code to be built. Valid values include:

          • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
          • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
          • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
            • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
            • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
          • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • gitCloneDepth (integer) --

          Information about the Git clone depth for the build project.

        • gitSubmodulesConfig (dict) --

          Information about the Git submodules configuration for the build project.

          • fetchSubmodules (boolean) --

            Set to true to fetch Git submodules for your AWS CodeBuild build project.

        • buildspec (string) --

          The buildspec file declaration to use for the builds in this build project.

          If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

        • auth (dict) --

          Information about the authorization settings for AWS CodeBuild to access the source code to be built.

          This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

          • type (string) --

            Note

            This data type is deprecated and is no longer accurate or used.

            The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

          • resource (string) --

            The resource value that applies to the specified authorization type.

        • reportBuildStatus (boolean) --

          Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

          Note

          The status of a build triggered by a webhook is always reported to your source provider.

        • buildStatusConfig (dict) --

          Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

          • context (string) --

            Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • targetUrl (string) --

            Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • insecureSsl (boolean) --

          Enable this flag to ignore SSL warnings while connecting to the project source code.

        • sourceIdentifier (string) --

          An identifier for this project source.

      • secondarySources (list) --

        An array of ProjectSource objects.

        • (dict) --

          Information about the build input source code for the build project.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

      • secondarySourceVersions (list) --

        An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.
        • (dict) --

          A source identifier and its corresponding version.

          • sourceIdentifier (string) --

            An identifier for a source in the build project.

          • sourceVersion (string) --

            The source version for the corresponding source identifier. If specified, must be one of:

            • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
            • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

            For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • artifacts (dict) --

        Information about the output artifacts for the build.

        • location (string) --

          Information about the location of the build artifacts.

        • sha256sum (string) --

          The SHA-256 hash of the build artifact.

          You can use this hash along with a checksum tool to confirm file integrity and authenticity.

          Note

          This value is available only if the build project's packaging value is set to ZIP .

        • md5sum (string) --

          The MD5 hash of the build artifact.

          You can use this hash along with a checksum tool to confirm file integrity and authenticity.

          Note

          This value is available only if the build project's packaging value is set to ZIP .

        • overrideArtifactName (boolean) --

          If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

        • encryptionDisabled (boolean) --

          Information that tells you if encryption for build artifacts is disabled.

        • artifactIdentifier (string) --

          An identifier for this artifact definition.

      • secondaryArtifacts (list) --

        An array of ProjectArtifacts objects.

        • (dict) --

          Information about build output artifacts.

          • location (string) --

            Information about the location of the build artifacts.

          • sha256sum (string) --

            The SHA-256 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • md5sum (string) --

            The MD5 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Information that tells you if encryption for build artifacts is disabled.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

      • cache (dict) --

        Information about the cache for the build.

        • type (string) --

          The type of cache used by the build project. Valid values include:

          • NO_CACHE : The build project does not use any cache.
          • S3 : The build project reads and writes from and to S3.
          • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
        • location (string) --

          Information about the cache location:

          • NO_CACHE or LOCAL : This value is ignored.
          • S3 : This is the S3 bucket name/prefix.
        • modes (list) --

          If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

          • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
          • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

          Note

          • You can use a Docker layer cache in the Linux environment only.
          • The privileged flag must be set so that your project has the required Docker permissions.
          • You should consider the security implications before you use a Docker layer cache.
          • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
            • Only directories can be specified for caching. You cannot specify individual files.
            • Symlinks are used to reference cached directories.
            • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
          • (string) --
      • environment (dict) --

        Information about the build environment for this build.

        • type (string) --

          The type of build environment to use for related builds.

          • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
          • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
          • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
        • image (string) --

          The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

          • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
          • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
        • computeType (string) --

          Information about the compute resources the build project uses. Available values include:

          • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
          • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
          • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
          • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

          If you use BUILD_GENERAL1_LARGE :

          • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
          • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
          • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

          For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

        • environmentVariables (list) --

          A set of environment variables to make available to builds for this build project.

          • (dict) --

            Information about an environment variable for a build project or a build.

            • name (string) --

              The name or key of the environment variable.

            • value (string) --

              The value of the environment variable.

              Warning

              We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

            • type (string) --

              The type of environment variable. Valid values include:

        • privilegedMode (boolean) --

          Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

          You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

          If the operating system's base image is Ubuntu Linux:

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

          If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

        • certificate (string) --

          The certificate to use with this build project.

        • registryCredential (dict) --

          The credentials for access to a private registry.

          • credential (string) --

            The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

            Note

            The credential can use the name of the credentials only if they exist in your current AWS Region.

          • credentialProvider (string) --

            The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

        • imagePullCredentialsType (string) --

          The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

          • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
          • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

          When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

      • serviceRole (string) --

        The name of a service role used for this build.

      • logs (dict) --

        Information about the build's logs in Amazon CloudWatch Logs.

        • groupName (string) --

          The name of the Amazon CloudWatch Logs group for the build logs.

        • streamName (string) --

          The name of the Amazon CloudWatch Logs stream for the build logs.

        • deepLink (string) --

          The URL to an individual build log in Amazon CloudWatch Logs.

        • s3DeepLink (string) --

          The URL to a build log in an S3 bucket.

        • cloudWatchLogsArn (string) --

          The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .

        • s3LogsArn (string) --

          The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .

        • cloudWatchLogs (dict) --

          Information about Amazon CloudWatch Logs for a build project.

          • status (string) --

            The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

            • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
            • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
          • groupName (string) --

            The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • streamName (string) --

            The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

        • s3Logs (dict) --

          Information about S3 logs for a build project.

          • status (string) --

            The current status of the S3 build logs. Valid values are:

            • ENABLED : S3 build logs are enabled for this build project.
            • DISABLED : S3 build logs are not enabled for this build project.
          • location (string) --

            The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

          • encryptionDisabled (boolean) --

            Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

      • timeoutInMinutes (integer) --

        How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.

      • queuedTimeoutInMinutes (integer) --

        The number of minutes a build is allowed to be queued before it times out.

      • buildComplete (boolean) --

        Whether the build is complete. True if complete; otherwise, false.

      • initiator (string) --

        The entity that started the build. Valid values include:

        • If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
        • If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example, MyUserName ).
        • If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .
      • vpcConfig (dict) --

        If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.

        • vpcId (string) --

          The ID of the Amazon VPC.

        • subnets (list) --

          A list of one or more subnet IDs in your Amazon VPC.

          • (string) --
        • securityGroupIds (list) --

          A list of one or more security groups IDs in your Amazon VPC.

          • (string) --
      • networkInterface (dict) --

        Describes a network interface.

        • subnetId (string) --

          The ID of the subnet.

        • networkInterfaceId (string) --

          The ID of the network interface.

      • encryptionKey (string) --

        The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

        Note

        You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

        You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

      • exportedEnvironmentVariables (list) --

        A list of exported environment variables for this build.

        • (dict) --

          Information about an exported environment variable.

          • name (string) --

            The name of this exported environment variable.

          • value (string) --

            The value assigned to this exported environment variable.

            Note

            During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.

      • reportArns (list) --

        An array of the ARNs associated with this build's reports.

        • (string) --
      • fileSystemLocations (list) --

        An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

        • (dict) --

          Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

          • type (string) --

            The type of the file system. The one supported type is EFS .

          • location (string) --

            A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

            The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

          • mountPoint (string) --

            The location in the container where you mount the file system.

          • identifier (string) --

            The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

            The identifier is used to mount your file system.

          • mountOptions (string) --

            The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

      • debugSession (dict) --

        Contains information about the debug session for this build.

        • sessionEnabled (boolean) --

          Specifies if session debugging is enabled for this build.

        • sessionTarget (string) --

          Contains the identifier of the Session Manager session used for the build. To work with the paused build, you open this session to examine, control, and resume the build.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
  • CodeBuild.Client.exceptions.AccountLimitExceededException
stop_build(**kwargs)

Attempts to stop running a build.

See also: AWS API Documentation

Request Syntax

response = client.stop_build(
    id='string'
)
Parameters
id (string) --

[REQUIRED]

The ID of the build.

Return type
dict
Returns
Response Syntax
{
    'build': {
        'id': 'string',
        'arn': 'string',
        'buildNumber': 123,
        'startTime': datetime(2015, 1, 1),
        'endTime': datetime(2015, 1, 1),
        'currentPhase': 'string',
        'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
        'sourceVersion': 'string',
        'resolvedSourceVersion': 'string',
        'projectName': 'string',
        'phases': [
            {
                'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                'startTime': datetime(2015, 1, 1),
                'endTime': datetime(2015, 1, 1),
                'durationInSeconds': 123,
                'contexts': [
                    {
                        'statusCode': 'string',
                        'message': 'string'
                    },
                ]
            },
        ],
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
        'secondarySources': [
            {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
        ],
        'secondarySourceVersions': [
            {
                'sourceIdentifier': 'string',
                'sourceVersion': 'string'
            },
        ],
        'artifacts': {
            'location': 'string',
            'sha256sum': 'string',
            'md5sum': 'string',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
        'secondaryArtifacts': [
            {
                'location': 'string',
                'sha256sum': 'string',
                'md5sum': 'string',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
        ],
        'cache': {
            'type': 'NO_CACHE'|'S3'|'LOCAL',
            'location': 'string',
            'modes': [
                'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
            ]
        },
        'environment': {
            'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string',
                    'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                },
            ],
            'privilegedMode': True|False,
            'certificate': 'string',
            'registryCredential': {
                'credential': 'string',
                'credentialProvider': 'SECRETS_MANAGER'
            },
            'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
        },
        'serviceRole': 'string',
        'logs': {
            'groupName': 'string',
            'streamName': 'string',
            'deepLink': 'string',
            's3DeepLink': 'string',
            'cloudWatchLogsArn': 'string',
            's3LogsArn': 'string',
            'cloudWatchLogs': {
                'status': 'ENABLED'|'DISABLED',
                'groupName': 'string',
                'streamName': 'string'
            },
            's3Logs': {
                'status': 'ENABLED'|'DISABLED',
                'location': 'string',
                'encryptionDisabled': True|False
            }
        },
        'timeoutInMinutes': 123,
        'queuedTimeoutInMinutes': 123,
        'buildComplete': True|False,
        'initiator': 'string',
        'vpcConfig': {
            'vpcId': 'string',
            'subnets': [
                'string',
            ],
            'securityGroupIds': [
                'string',
            ]
        },
        'networkInterface': {
            'subnetId': 'string',
            'networkInterfaceId': 'string'
        },
        'encryptionKey': 'string',
        'exportedEnvironmentVariables': [
            {
                'name': 'string',
                'value': 'string'
            },
        ],
        'reportArns': [
            'string',
        ],
        'fileSystemLocations': [
            {
                'type': 'EFS',
                'location': 'string',
                'mountPoint': 'string',
                'identifier': 'string',
                'mountOptions': 'string'
            },
        ],
        'debugSession': {
            'sessionEnabled': True|False,
            'sessionTarget': 'string'
        }
    }
}

Response Structure

  • (dict) --
    • build (dict) --

      Information about the build.

      • id (string) --

        The unique ID for the build.

      • arn (string) --

        The Amazon Resource Name (ARN) of the build.

      • buildNumber (integer) --

        The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.

      • startTime (datetime) --

        When the build process started, expressed in Unix time format.

      • endTime (datetime) --

        When the build process ended, expressed in Unix time format.

      • currentPhase (string) --

        The current build phase.

      • buildStatus (string) --

        The current status of the build. Valid values include:

        • FAILED : The build failed.
        • FAULT : The build faulted.
        • IN_PROGRESS : The build is still in progress.
        • STOPPED : The build stopped.
        • SUCCEEDED : The build succeeded.
        • TIMED_OUT : The build timed out.
      • sourceVersion (string) --

        Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • resolvedSourceVersion (string) --

        An identifier for the version of this build's source code.

        • For AWS CodeCommit, GitHub, GitHub Enterprise, and BitBucket, the commit ID.
        • For AWS CodePipeline, the source revision provided by AWS CodePipeline.
        • For Amazon Simple Storage Service (Amazon S3), this does not apply.
      • projectName (string) --

        The name of the AWS CodeBuild project.

      • phases (list) --

        Information about all previous build phases that are complete and information about any current build phase that is not yet complete.

        • (dict) --

          Information about a stage for a build.

          • phaseType (string) --

            The name of the build phase. Valid values include:

            • BUILD : Core build activities typically occur in this build phase.
            • COMPLETED : The build has been completed.
            • DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
            • FINALIZING : The build process is completing in this build phase.
            • INSTALL : Installation activities typically occur in this build phase.
            • POST_BUILD : Post-build activities typically occur in this build phase.
            • PRE_BUILD : Pre-build activities typically occur in this build phase.
            • PROVISIONING : The build environment is being set up.
            • QUEUED : The build has been submitted and is queued behind other submitted builds.
            • SUBMITTED : The build has been submitted.
            • UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
          • phaseStatus (string) --

            The current status of the build phase. Valid values include:

            • FAILED : The build phase failed.
            • FAULT : The build phase faulted.
            • IN_PROGRESS : The build phase is still in progress.
            • QUEUED : The build has been submitted and is queued behind other submitted builds.
            • STOPPED : The build phase stopped.
            • SUCCEEDED : The build phase succeeded.
            • TIMED_OUT : The build phase timed out.
          • startTime (datetime) --

            When the build phase started, expressed in Unix time format.

          • endTime (datetime) --

            When the build phase ended, expressed in Unix time format.

          • durationInSeconds (integer) --

            How long, in seconds, between the starting and ending times of the build's phase.

          • contexts (list) --

            Additional information about a build phase, especially to help troubleshoot a failed build.

            • (dict) --

              Additional information about a build phase that has an error. You can use this information for troubleshooting.

              • statusCode (string) --

                The status code for the context of the build phase.

              • message (string) --

                An explanation of the build phase's context. This might include a command ID and an exit code.

      • source (dict) --

        Information about the source code to be built.

        • type (string) --

          The type of repository that contains the source code to be built. Valid values include:

          • BITBUCKET : The source code is in a Bitbucket repository.
          • CODECOMMIT : The source code is in an AWS CodeCommit repository.
          • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
          • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
          • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
          • NO_SOURCE : The project does not have input source code.
          • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
        • location (string) --

          Information about the location of the source code to be built. Valid values include:

          • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
          • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
          • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
            • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
            • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
          • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • gitCloneDepth (integer) --

          Information about the Git clone depth for the build project.

        • gitSubmodulesConfig (dict) --

          Information about the Git submodules configuration for the build project.

          • fetchSubmodules (boolean) --

            Set to true to fetch Git submodules for your AWS CodeBuild build project.

        • buildspec (string) --

          The buildspec file declaration to use for the builds in this build project.

          If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

        • auth (dict) --

          Information about the authorization settings for AWS CodeBuild to access the source code to be built.

          This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

          • type (string) --

            Note

            This data type is deprecated and is no longer accurate or used.

            The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

          • resource (string) --

            The resource value that applies to the specified authorization type.

        • reportBuildStatus (boolean) --

          Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

          Note

          The status of a build triggered by a webhook is always reported to your source provider.

        • buildStatusConfig (dict) --

          Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

          • context (string) --

            Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • targetUrl (string) --

            Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • insecureSsl (boolean) --

          Enable this flag to ignore SSL warnings while connecting to the project source code.

        • sourceIdentifier (string) --

          An identifier for this project source.

      • secondarySources (list) --

        An array of ProjectSource objects.

        • (dict) --

          Information about the build input source code for the build project.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

      • secondarySourceVersions (list) --

        An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.
        • (dict) --

          A source identifier and its corresponding version.

          • sourceIdentifier (string) --

            An identifier for a source in the build project.

          • sourceVersion (string) --

            The source version for the corresponding source identifier. If specified, must be one of:

            • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
            • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

            For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • artifacts (dict) --

        Information about the output artifacts for the build.

        • location (string) --

          Information about the location of the build artifacts.

        • sha256sum (string) --

          The SHA-256 hash of the build artifact.

          You can use this hash along with a checksum tool to confirm file integrity and authenticity.

          Note

          This value is available only if the build project's packaging value is set to ZIP .

        • md5sum (string) --

          The MD5 hash of the build artifact.

          You can use this hash along with a checksum tool to confirm file integrity and authenticity.

          Note

          This value is available only if the build project's packaging value is set to ZIP .

        • overrideArtifactName (boolean) --

          If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

        • encryptionDisabled (boolean) --

          Information that tells you if encryption for build artifacts is disabled.

        • artifactIdentifier (string) --

          An identifier for this artifact definition.

      • secondaryArtifacts (list) --

        An array of ProjectArtifacts objects.

        • (dict) --

          Information about build output artifacts.

          • location (string) --

            Information about the location of the build artifacts.

          • sha256sum (string) --

            The SHA-256 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • md5sum (string) --

            The MD5 hash of the build artifact.

            You can use this hash along with a checksum tool to confirm file integrity and authenticity.

            Note

            This value is available only if the build project's packaging value is set to ZIP .

          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Information that tells you if encryption for build artifacts is disabled.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

      • cache (dict) --

        Information about the cache for the build.

        • type (string) --

          The type of cache used by the build project. Valid values include:

          • NO_CACHE : The build project does not use any cache.
          • S3 : The build project reads and writes from and to S3.
          • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
        • location (string) --

          Information about the cache location:

          • NO_CACHE or LOCAL : This value is ignored.
          • S3 : This is the S3 bucket name/prefix.
        • modes (list) --

          If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

          • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
          • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

          Note

          • You can use a Docker layer cache in the Linux environment only.
          • The privileged flag must be set so that your project has the required Docker permissions.
          • You should consider the security implications before you use a Docker layer cache.
          • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
            • Only directories can be specified for caching. You cannot specify individual files.
            • Symlinks are used to reference cached directories.
            • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
          • (string) --
      • environment (dict) --

        Information about the build environment for this build.

        • type (string) --

          The type of build environment to use for related builds.

          • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
          • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
          • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
        • image (string) --

          The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

          • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
          • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
        • computeType (string) --

          Information about the compute resources the build project uses. Available values include:

          • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
          • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
          • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
          • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

          If you use BUILD_GENERAL1_LARGE :

          • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
          • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
          • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

          For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

        • environmentVariables (list) --

          A set of environment variables to make available to builds for this build project.

          • (dict) --

            Information about an environment variable for a build project or a build.

            • name (string) --

              The name or key of the environment variable.

            • value (string) --

              The value of the environment variable.

              Warning

              We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

            • type (string) --

              The type of environment variable. Valid values include:

        • privilegedMode (boolean) --

          Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

          You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

          If the operating system's base image is Ubuntu Linux:

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

          If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

        • certificate (string) --

          The certificate to use with this build project.

        • registryCredential (dict) --

          The credentials for access to a private registry.

          • credential (string) --

            The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

            Note

            The credential can use the name of the credentials only if they exist in your current AWS Region.

          • credentialProvider (string) --

            The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

        • imagePullCredentialsType (string) --

          The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

          • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
          • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

          When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

      • serviceRole (string) --

        The name of a service role used for this build.

      • logs (dict) --

        Information about the build's logs in Amazon CloudWatch Logs.

        • groupName (string) --

          The name of the Amazon CloudWatch Logs group for the build logs.

        • streamName (string) --

          The name of the Amazon CloudWatch Logs stream for the build logs.

        • deepLink (string) --

          The URL to an individual build log in Amazon CloudWatch Logs.

        • s3DeepLink (string) --

          The URL to a build log in an S3 bucket.

        • cloudWatchLogsArn (string) --

          The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .

        • s3LogsArn (string) --

          The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .

        • cloudWatchLogs (dict) --

          Information about Amazon CloudWatch Logs for a build project.

          • status (string) --

            The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

            • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
            • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
          • groupName (string) --

            The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • streamName (string) --

            The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

        • s3Logs (dict) --

          Information about S3 logs for a build project.

          • status (string) --

            The current status of the S3 build logs. Valid values are:

            • ENABLED : S3 build logs are enabled for this build project.
            • DISABLED : S3 build logs are not enabled for this build project.
          • location (string) --

            The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

          • encryptionDisabled (boolean) --

            Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

      • timeoutInMinutes (integer) --

        How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.

      • queuedTimeoutInMinutes (integer) --

        The number of minutes a build is allowed to be queued before it times out.

      • buildComplete (boolean) --

        Whether the build is complete. True if complete; otherwise, false.

      • initiator (string) --

        The entity that started the build. Valid values include:

        • If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
        • If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example, MyUserName ).
        • If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .
      • vpcConfig (dict) --

        If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.

        • vpcId (string) --

          The ID of the Amazon VPC.

        • subnets (list) --

          A list of one or more subnet IDs in your Amazon VPC.

          • (string) --
        • securityGroupIds (list) --

          A list of one or more security groups IDs in your Amazon VPC.

          • (string) --
      • networkInterface (dict) --

        Describes a network interface.

        • subnetId (string) --

          The ID of the subnet.

        • networkInterfaceId (string) --

          The ID of the network interface.

      • encryptionKey (string) --

        The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

        Note

        You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

        You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

      • exportedEnvironmentVariables (list) --

        A list of exported environment variables for this build.

        • (dict) --

          Information about an exported environment variable.

          • name (string) --

            The name of this exported environment variable.

          • value (string) --

            The value assigned to this exported environment variable.

            Note

            During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.

      • reportArns (list) --

        An array of the ARNs associated with this build's reports.

        • (string) --
      • fileSystemLocations (list) --

        An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

        • (dict) --

          Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

          • type (string) --

            The type of the file system. The one supported type is EFS .

          • location (string) --

            A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

            The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

          • mountPoint (string) --

            The location in the container where you mount the file system.

          • identifier (string) --

            The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

            The identifier is used to mount your file system.

          • mountOptions (string) --

            The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

      • debugSession (dict) --

        Contains information about the debug session for this build.

        • sessionEnabled (boolean) --

          Specifies if session debugging is enabled for this build.

        • sessionTarget (string) --

          Contains the identifier of the Session Manager session used for the build. To work with the paused build, you open this session to examine, control, and resume the build.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
update_project(**kwargs)

Changes the settings of a build project.

See also: AWS API Documentation

Request Syntax

response = client.update_project(
    name='string',
    description='string',
    source={
        'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
        'location': 'string',
        'gitCloneDepth': 123,
        'gitSubmodulesConfig': {
            'fetchSubmodules': True|False
        },
        'buildspec': 'string',
        'auth': {
            'type': 'OAUTH',
            'resource': 'string'
        },
        'reportBuildStatus': True|False,
        'buildStatusConfig': {
            'context': 'string',
            'targetUrl': 'string'
        },
        'insecureSsl': True|False,
        'sourceIdentifier': 'string'
    },
    secondarySources=[
        {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
    ],
    sourceVersion='string',
    secondarySourceVersions=[
        {
            'sourceIdentifier': 'string',
            'sourceVersion': 'string'
        },
    ],
    artifacts={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP',
        'overrideArtifactName': True|False,
        'encryptionDisabled': True|False,
        'artifactIdentifier': 'string'
    },
    secondaryArtifacts=[
        {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
    ],
    cache={
        'type': 'NO_CACHE'|'S3'|'LOCAL',
        'location': 'string',
        'modes': [
            'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
        ]
    },
    environment={
        'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
        'image': 'string',
        'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
        'environmentVariables': [
            {
                'name': 'string',
                'value': 'string',
                'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
            },
        ],
        'privilegedMode': True|False,
        'certificate': 'string',
        'registryCredential': {
            'credential': 'string',
            'credentialProvider': 'SECRETS_MANAGER'
        },
        'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
    },
    serviceRole='string',
    timeoutInMinutes=123,
    queuedTimeoutInMinutes=123,
    encryptionKey='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ],
    vpcConfig={
        'vpcId': 'string',
        'subnets': [
            'string',
        ],
        'securityGroupIds': [
            'string',
        ]
    },
    badgeEnabled=True|False,
    logsConfig={
        'cloudWatchLogs': {
            'status': 'ENABLED'|'DISABLED',
            'groupName': 'string',
            'streamName': 'string'
        },
        's3Logs': {
            'status': 'ENABLED'|'DISABLED',
            'location': 'string',
            'encryptionDisabled': True|False
        }
    },
    fileSystemLocations=[
        {
            'type': 'EFS',
            'location': 'string',
            'mountPoint': 'string',
            'identifier': 'string',
            'mountOptions': 'string'
        },
    ]
)
Parameters
  • name (string) --

    [REQUIRED]

    The name of the build project.

    Note

    You cannot change a build project's name.

  • description (string) -- A new or replacement description of the build project.
  • source (dict) --

    Information to be changed about the build input source code for the build project.

    • type (string) -- [REQUIRED]

      The type of repository that contains the source code to be built. Valid values include:

      • BITBUCKET : The source code is in a Bitbucket repository.
      • CODECOMMIT : The source code is in an AWS CodeCommit repository.
      • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
      • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
      • NO_SOURCE : The project does not have input source code.
      • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    • location (string) --

      Information about the location of the source code to be built. Valid values include:

      • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
        • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
        • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
      • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
      • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
    • gitCloneDepth (integer) --

      Information about the Git clone depth for the build project.

    • gitSubmodulesConfig (dict) --

      Information about the Git submodules configuration for the build project.

      • fetchSubmodules (boolean) -- [REQUIRED]

        Set to true to fetch Git submodules for your AWS CodeBuild build project.

    • buildspec (string) --

      The buildspec file declaration to use for the builds in this build project.

      If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

    • auth (dict) --

      Information about the authorization settings for AWS CodeBuild to access the source code to be built.

      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

      • type (string) -- [REQUIRED]

        Note

        This data type is deprecated and is no longer accurate or used.

        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

      • resource (string) --

        The resource value that applies to the specified authorization type.

    • reportBuildStatus (boolean) --

      Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

      Note

      The status of a build triggered by a webhook is always reported to your source provider.

    • buildStatusConfig (dict) --

      Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

      • context (string) --

        Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

        Bitbucket

        This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

        GitHub/GitHub Enterprise Server

        This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

      • targetUrl (string) --

        Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

        Bitbucket

        This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

        GitHub/GitHub Enterprise Server

        This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

    • insecureSsl (boolean) --

      Enable this flag to ignore SSL warnings while connecting to the project source code.

    • sourceIdentifier (string) --

      An identifier for this project source.

  • secondarySources (list) --

    An array of ProjectSource objects.

    • (dict) --

      Information about the build input source code for the build project.

      • type (string) -- [REQUIRED]

        The type of repository that contains the source code to be built. Valid values include:

        • BITBUCKET : The source code is in a Bitbucket repository.
        • CODECOMMIT : The source code is in an AWS CodeCommit repository.
        • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
        • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
        • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
        • NO_SOURCE : The project does not have input source code.
        • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
      • location (string) --

        Information about the location of the source code to be built. Valid values include:

        • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
        • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
        • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
          • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
          • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
        • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
      • gitCloneDepth (integer) --

        Information about the Git clone depth for the build project.

      • gitSubmodulesConfig (dict) --

        Information about the Git submodules configuration for the build project.

        • fetchSubmodules (boolean) -- [REQUIRED]

          Set to true to fetch Git submodules for your AWS CodeBuild build project.

      • buildspec (string) --

        The buildspec file declaration to use for the builds in this build project.

        If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

      • auth (dict) --

        Information about the authorization settings for AWS CodeBuild to access the source code to be built.

        This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

        • type (string) -- [REQUIRED]

          Note

          This data type is deprecated and is no longer accurate or used.

          The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

        • resource (string) --

          The resource value that applies to the specified authorization type.

      • reportBuildStatus (boolean) --

        Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

        Note

        The status of a build triggered by a webhook is always reported to your source provider.

      • buildStatusConfig (dict) --

        Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

        • context (string) --

          Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • targetUrl (string) --

          Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

          Bitbucket

          This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

          GitHub/GitHub Enterprise Server

          This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

      • insecureSsl (boolean) --

        Enable this flag to ignore SSL warnings while connecting to the project source code.

      • sourceIdentifier (string) --

        An identifier for this project source.

  • sourceVersion (string) --

    A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:

    • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
    • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
    • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

    If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).

    For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • secondarySourceVersions (list) --

    An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).

    • (dict) --

      A source identifier and its corresponding version.

      • sourceIdentifier (string) -- [REQUIRED]

        An identifier for a source in the build project.

      • sourceVersion (string) -- [REQUIRED]

        The source version for the corresponding source identifier. If specified, must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

  • artifacts (dict) --

    Information to be changed about the build output artifacts for the build project.

    • type (string) -- [REQUIRED]

      The type of build output artifact. Valid values include:

      • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

      Note

      The CODEPIPELINE type is not supported for secondaryArtifacts .

      • NO_ARTIFACTS : The build project does not produce any build output.
      • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
    • location (string) --

      Information about the build output artifact location:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output bucket.
    • path (string) --

      Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

      For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

    • namespaceType (string) --

      Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • BUILD_ID : Include the build ID in the location of the build output artifact.
        • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

    • name (string) --

      Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

      For example:

      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
      • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
      • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
    • packaging (string) --

      The type of build output artifact to create:

      • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
      • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
      • If type is set to S3 , valid values include:
        • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
        • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
    • overrideArtifactName (boolean) --

      If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

    • encryptionDisabled (boolean) --

      Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

    • artifactIdentifier (string) --

      An identifier for this artifact definition.

  • secondaryArtifacts (list) --

    An array of ProjectSource objects.

    • (dict) --

      Information about the build output artifacts for the build project.

      • type (string) -- [REQUIRED]

        The type of build output artifact. Valid values include:

        • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

        Note

        The CODEPIPELINE type is not supported for secondaryArtifacts .

        • NO_ARTIFACTS : The build project does not produce any build output.
        • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
      • location (string) --

        Information about the build output artifact location:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output bucket.
      • path (string) --

        Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

        For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

      • namespaceType (string) --

        Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • BUILD_ID : Include the build ID in the location of the build output artifact.
          • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

        For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

      • name (string) --

        Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

        For example:

        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
        • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
        • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
      • packaging (string) --

        The type of build output artifact to create:

        • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
        • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
        • If type is set to S3 , valid values include:
          • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
          • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
      • overrideArtifactName (boolean) --

        If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

      • encryptionDisabled (boolean) --

        Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

      • artifactIdentifier (string) --

        An identifier for this artifact definition.

  • cache (dict) --

    Stores recently used information so that it can be quickly accessed at a later time.

    • type (string) -- [REQUIRED]

      The type of cache used by the build project. Valid values include:

      • NO_CACHE : The build project does not use any cache.
      • S3 : The build project reads and writes from and to S3.
      • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
    • location (string) --

      Information about the cache location:

      • NO_CACHE or LOCAL : This value is ignored.
      • S3 : This is the S3 bucket name/prefix.
    • modes (list) --

      If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

      • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
      • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

      Note

      • You can use a Docker layer cache in the Linux environment only.
      • The privileged flag must be set so that your project has the required Docker permissions.
      • You should consider the security implications before you use a Docker layer cache.
      • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
        • Only directories can be specified for caching. You cannot specify individual files.
        • Symlinks are used to reference cached directories.
        • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
      • (string) --
  • environment (dict) --

    Information to be changed about the build environment for the build project.

    • type (string) -- [REQUIRED]

      The type of build environment to use for related builds.

      • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
      • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
      • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
    • image (string) -- [REQUIRED]

      The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

      • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
      • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
    • computeType (string) -- [REQUIRED]

      Information about the compute resources the build project uses. Available values include:

      • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
      • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

      If you use BUILD_GENERAL1_LARGE :

      • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
      • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
      • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

      For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

    • environmentVariables (list) --

      A set of environment variables to make available to builds for this build project.

      • (dict) --

        Information about an environment variable for a build project or a build.

        • name (string) -- [REQUIRED]

          The name or key of the environment variable.

        • value (string) -- [REQUIRED]

          The value of the environment variable.

          Warning

          We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

        • type (string) --

          The type of environment variable. Valid values include:

    • privilegedMode (boolean) --

      Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

      You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

      If the operating system's base image is Ubuntu Linux:

      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

      - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

      If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

      - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

    • certificate (string) --

      The certificate to use with this build project.

    • registryCredential (dict) --

      The credentials for access to a private registry.

      • credential (string) -- [REQUIRED]

        The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

        Note

        The credential can use the name of the credentials only if they exist in your current AWS Region.

      • credentialProvider (string) -- [REQUIRED]

        The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

    • imagePullCredentialsType (string) --

      The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

      • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
      • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

      When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

  • serviceRole (string) -- The replacement ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
  • timeoutInMinutes (integer) -- The replacement value in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed.
  • queuedTimeoutInMinutes (integer) -- The number of minutes a build is allowed to be queued before it times out.
  • encryptionKey (string) --

    The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

    Note

    You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

    You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

  • tags (list) --

    An updated list of tag key and value pairs associated with this build project.

    These tags are available for use by AWS services that support AWS CodeBuild build project tags.

    • (dict) --

      A tag, consisting of a key and a value.

      This tag is available for use by AWS services that support tags in AWS CodeBuild.

      • key (string) --

        The tag's key.

      • value (string) --

        The tag's value.

  • vpcConfig (dict) --

    VpcConfig enables AWS CodeBuild to access resources in an Amazon VPC.

    • vpcId (string) --

      The ID of the Amazon VPC.

    • subnets (list) --

      A list of one or more subnet IDs in your Amazon VPC.

      • (string) --
    • securityGroupIds (list) --

      A list of one or more security groups IDs in your Amazon VPC.

      • (string) --
  • badgeEnabled (boolean) -- Set this to true to generate a publicly accessible URL for your project's build badge.
  • logsConfig (dict) --

    Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, logs in an S3 bucket, or both.

    • cloudWatchLogs (dict) --

      Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

        • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
        • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
      • groupName (string) --

        The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

      • streamName (string) --

        The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

    • s3Logs (dict) --

      Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

      • status (string) -- [REQUIRED]

        The current status of the S3 build logs. Valid values are:

        • ENABLED : S3 build logs are enabled for this build project.
        • DISABLED : S3 build logs are not enabled for this build project.
      • location (string) --

        The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

      • encryptionDisabled (boolean) --

        Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

  • fileSystemLocations (list) --

    An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

    • (dict) --

      Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

      • type (string) --

        The type of the file system. The one supported type is EFS .

      • location (string) --

        A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

        The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

      • mountPoint (string) --

        The location in the container where you mount the file system.

      • identifier (string) --

        The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

        The identifier is used to mount your file system.

      • mountOptions (string) --

        The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

Return type

dict

Returns

Response Syntax

{
    'project': {
        'name': 'string',
        'arn': 'string',
        'description': 'string',
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
            'location': 'string',
            'gitCloneDepth': 123,
            'gitSubmodulesConfig': {
                'fetchSubmodules': True|False
            },
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            },
            'reportBuildStatus': True|False,
            'buildStatusConfig': {
                'context': 'string',
                'targetUrl': 'string'
            },
            'insecureSsl': True|False,
            'sourceIdentifier': 'string'
        },
        'secondarySources': [
            {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
                'location': 'string',
                'gitCloneDepth': 123,
                'gitSubmodulesConfig': {
                    'fetchSubmodules': True|False
                },
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                },
                'reportBuildStatus': True|False,
                'buildStatusConfig': {
                    'context': 'string',
                    'targetUrl': 'string'
                },
                'insecureSsl': True|False,
                'sourceIdentifier': 'string'
            },
        ],
        'sourceVersion': 'string',
        'secondarySourceVersions': [
            {
                'sourceIdentifier': 'string',
                'sourceVersion': 'string'
            },
        ],
        'artifacts': {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP',
            'overrideArtifactName': True|False,
            'encryptionDisabled': True|False,
            'artifactIdentifier': 'string'
        },
        'secondaryArtifacts': [
            {
                'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
                'location': 'string',
                'path': 'string',
                'namespaceType': 'NONE'|'BUILD_ID',
                'name': 'string',
                'packaging': 'NONE'|'ZIP',
                'overrideArtifactName': True|False,
                'encryptionDisabled': True|False,
                'artifactIdentifier': 'string'
            },
        ],
        'cache': {
            'type': 'NO_CACHE'|'S3'|'LOCAL',
            'location': 'string',
            'modes': [
                'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
            ]
        },
        'environment': {
            'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string',
                    'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
                },
            ],
            'privilegedMode': True|False,
            'certificate': 'string',
            'registryCredential': {
                'credential': 'string',
                'credentialProvider': 'SECRETS_MANAGER'
            },
            'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
        },
        'serviceRole': 'string',
        'timeoutInMinutes': 123,
        'queuedTimeoutInMinutes': 123,
        'encryptionKey': 'string',
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ],
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1),
        'webhook': {
            'url': 'string',
            'payloadUrl': 'string',
            'secret': 'string',
            'branchFilter': 'string',
            'filterGroups': [
                [
                    {
                        'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                        'pattern': 'string',
                        'excludeMatchedPattern': True|False
                    },
                ],
            ],
            'lastModifiedSecret': datetime(2015, 1, 1)
        },
        'vpcConfig': {
            'vpcId': 'string',
            'subnets': [
                'string',
            ],
            'securityGroupIds': [
                'string',
            ]
        },
        'badge': {
            'badgeEnabled': True|False,
            'badgeRequestUrl': 'string'
        },
        'logsConfig': {
            'cloudWatchLogs': {
                'status': 'ENABLED'|'DISABLED',
                'groupName': 'string',
                'streamName': 'string'
            },
            's3Logs': {
                'status': 'ENABLED'|'DISABLED',
                'location': 'string',
                'encryptionDisabled': True|False
            }
        },
        'fileSystemLocations': [
            {
                'type': 'EFS',
                'location': 'string',
                'mountPoint': 'string',
                'identifier': 'string',
                'mountOptions': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    • project (dict) --

      Information about the build project that was changed.

      • name (string) --

        The name of the build project.

      • arn (string) --

        The Amazon Resource Name (ARN) of the build project.

      • description (string) --

        A description that makes the build project easy to identify.

      • source (dict) --

        Information about the build input source code for this build project.

        • type (string) --

          The type of repository that contains the source code to be built. Valid values include:

          • BITBUCKET : The source code is in a Bitbucket repository.
          • CODECOMMIT : The source code is in an AWS CodeCommit repository.
          • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
          • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
          • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
          • NO_SOURCE : The project does not have input source code.
          • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
        • location (string) --

          Information about the location of the source code to be built. Valid values include:

          • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
          • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
          • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
            • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
            • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
          • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
        • gitCloneDepth (integer) --

          Information about the Git clone depth for the build project.

        • gitSubmodulesConfig (dict) --

          Information about the Git submodules configuration for the build project.

          • fetchSubmodules (boolean) --

            Set to true to fetch Git submodules for your AWS CodeBuild build project.

        • buildspec (string) --

          The buildspec file declaration to use for the builds in this build project.

          If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

        • auth (dict) --

          Information about the authorization settings for AWS CodeBuild to access the source code to be built.

          This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

          • type (string) --

            Note

            This data type is deprecated and is no longer accurate or used.

            The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

          • resource (string) --

            The resource value that applies to the specified authorization type.

        • reportBuildStatus (boolean) --

          Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

          Note

          The status of a build triggered by a webhook is always reported to your source provider.

        • buildStatusConfig (dict) --

          Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

          • context (string) --

            Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • targetUrl (string) --

            Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

            Bitbucket

            This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

            GitHub/GitHub Enterprise Server

            This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

        • insecureSsl (boolean) --

          Enable this flag to ignore SSL warnings while connecting to the project source code.

        • sourceIdentifier (string) --

          An identifier for this project source.

      • secondarySources (list) --

        An array of ProjectSource objects.

        • (dict) --

          Information about the build input source code for the build project.

          • type (string) --

            The type of repository that contains the source code to be built. Valid values include:

            • BITBUCKET : The source code is in a Bitbucket repository.
            • CODECOMMIT : The source code is in an AWS CodeCommit repository.
            • CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
            • GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.
            • GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.
            • NO_SOURCE : The project does not have input source code.
            • S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
          • location (string) --

            Information about the location of the source code to be built. Valid values include:

            • For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline ignores it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
            • For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the buildspec file (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
            • For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, one of the following.
              • The path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` ).
              • The path to the folder that contains the source code (for example, `` bucket-name /path /to /source-code /folder /`` ).
            • For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your GitHub account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to, and then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
            • For source code in a Bitbucket repository, the HTTPS clone URL to the repository that contains the source and the buildspec file. You must connect your AWS account to your Bitbucket account. Use the AWS CodeBuild console to start creating a build project. When you use the console to connect (or reconnect) with Bitbucket, on the Bitbucket Confirm access to your account page, choose Grant access . (After you have connected to your Bitbucket account, you do not need to finish creating the build project. You can leave the AWS CodeBuild console.) To instruct AWS CodeBuild to use this connection, in the source object, set the auth object's type value to OAUTH .
          • gitCloneDepth (integer) --

            Information about the Git clone depth for the build project.

          • gitSubmodulesConfig (dict) --

            Information about the Git submodules configuration for the build project.

            • fetchSubmodules (boolean) --

              Set to true to fetch Git submodules for your AWS CodeBuild build project.

          • buildspec (string) --

            The buildspec file declaration to use for the builds in this build project.

            If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .

          • auth (dict) --

            Information about the authorization settings for AWS CodeBuild to access the source code to be built.

            This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.

            • type (string) --

              Note

              This data type is deprecated and is no longer accurate or used.

              The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.

            • resource (string) --

              The resource value that applies to the specified authorization type.

          • reportBuildStatus (boolean) --

            Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.

            Note

            The status of a build triggered by a webhook is always reported to your source provider.

          • buildStatusConfig (dict) --

            Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .

            • context (string) --

              Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

            • targetUrl (string) --

              Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

              Bitbucket

              This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.

              GitHub/GitHub Enterprise Server

              This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.

          • insecureSsl (boolean) --

            Enable this flag to ignore SSL warnings while connecting to the project source code.

          • sourceIdentifier (string) --

            An identifier for this project source.

      • sourceVersion (string) --

        A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:

        • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
        • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
        • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

        If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).

        For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • secondarySourceVersions (list) --

        An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).

        • (dict) --

          A source identifier and its corresponding version.

          • sourceIdentifier (string) --

            An identifier for a source in the build project.

          • sourceVersion (string) --

            The source version for the corresponding source identifier. If specified, must be one of:

            • For AWS CodeCommit: the commit ID, branch, or Git tag to use.
            • For GitHub: the commit ID, pull request ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a pull request ID is specified, it must use the format pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Bitbucket: the commit ID, branch name, or tag name that corresponds to the version of the source code you want to build. If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.
            • For Amazon Simple Storage Service (Amazon S3): the version ID of the object that represents the build input ZIP file to use.

            For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .

      • artifacts (dict) --

        Information about the build output artifacts for the build project.

        • type (string) --

          The type of build output artifact. Valid values include:

          • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

          Note

          The CODEPIPELINE type is not supported for secondaryArtifacts .

          • NO_ARTIFACTS : The build project does not produce any build output.
          • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
        • location (string) --

          Information about the build output artifact location:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the name of the output bucket.
        • path (string) --

          Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

          For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

        • namespaceType (string) --

          Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , valid values include:
            • BUILD_ID : Include the build ID in the location of the build output artifact.
            • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

          For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

        • name (string) --

          Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

          For example:

          • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
          • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
          • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
        • packaging (string) --

          The type of build output artifact to create:

          • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
          • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
          • If type is set to S3 , valid values include:
            • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
            • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
        • overrideArtifactName (boolean) --

          If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

        • encryptionDisabled (boolean) --

          Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

        • artifactIdentifier (string) --

          An identifier for this artifact definition.

      • secondaryArtifacts (list) --

        An array of ProjectArtifacts objects.

        • (dict) --

          Information about the build output artifacts for the build project.

          • type (string) --

            The type of build output artifact. Valid values include:

            • CODEPIPELINE : The build project has build output generated through AWS CodePipeline.

            Note

            The CODEPIPELINE type is not supported for secondaryArtifacts .

            • NO_ARTIFACTS : The build project does not produce any build output.
            • S3 : The build project stores build output in Amazon Simple Storage Service (Amazon S3).
          • location (string) --

            Information about the build output artifact location:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output bucket.
          • path (string) --

            Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the path to the output artifact. If path is not specified, path is not used.

            For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .

          • namespaceType (string) --

            Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • BUILD_ID : Include the build ID in the location of the build output artifact.
              • NONE : Do not include the build ID. This is the default if namespaceType is not specified.

            For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .

          • name (string) --

            Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , this is the name of the output artifact object. If you set the name to be a forward slash ("/"), the artifact is stored in the root of the output bucket.

            For example:

            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
            • If path is empty, namespaceType is set to NONE , and name is set to "/ ", the output artifact is stored in the root of the output bucket.
            • If path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to "/ ", the output artifact is stored in ``MyArtifacts/build-ID `` .
          • packaging (string) --

            The type of build output artifact to create:

            • If type is set to CODEPIPELINE , AWS CodePipeline ignores this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
            • If type is set to NO_ARTIFACTS , this value is ignored if specified, because no build output is produced.
            • If type is set to S3 , valid values include:
              • NONE : AWS CodeBuild creates in the output bucket a folder that contains the build output. This is the default if packaging is not specified.
              • ZIP : AWS CodeBuild creates in the output bucket a ZIP file that contains the build output.
          • overrideArtifactName (boolean) --

            If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.

          • encryptionDisabled (boolean) --

            Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.

          • artifactIdentifier (string) --

            An identifier for this artifact definition.

      • cache (dict) --

        Information about the cache for the build project.

        • type (string) --

          The type of cache used by the build project. Valid values include:

          • NO_CACHE : The build project does not use any cache.
          • S3 : The build project reads and writes from and to S3.
          • LOCAL : The build project stores a cache locally on a build host that is only available to that build host.
        • location (string) --

          Information about the cache location:

          • NO_CACHE or LOCAL : This value is ignored.
          • S3 : This is the S3 bucket name/prefix.
        • modes (list) --

          If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.

          • LOCAL_SOURCE_CACHE mode caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
          • LOCAL_DOCKER_LAYER_CACHE mode caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.

          Note

          • You can use a Docker layer cache in the Linux environment only.
          • The privileged flag must be set so that your project has the required Docker permissions.
          • You should consider the security implications before you use a Docker layer cache.
          • LOCAL_CUSTOM_CACHE mode caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
            • Only directories can be specified for caching. You cannot specify individual files.
            • Symlinks are used to reference cached directories.
            • Cached directories are linked to your build before it downloads its project sources. Cached items are overridden if a source item has the same name. Directories are specified using cache paths in the buildspec file.
          • (string) --
      • environment (dict) --

        Information about the build environment for this build project.

        • type (string) --

          The type of build environment to use for related builds.

          • The environment type ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).
          • The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
          • The environment type LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).
        • image (string) --

          The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:

          • For an image tag: registry/repository:tag . For example, to specify an image with the tag "latest," use registry/repository:latest .
          • For an image digest: registry/repository@digest . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use registry/repository@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .
        • computeType (string) --

          Information about the compute resources the build project uses. Available values include:

          • BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
          • BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
          • BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.
          • BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.

          If you use BUILD_GENERAL1_LARGE :

          • For environment type LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.
          • For environment type LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.
          • For environment type ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.

          For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.

        • environmentVariables (list) --

          A set of environment variables to make available to builds for this build project.

          • (dict) --

            Information about an environment variable for a build project or a build.

            • name (string) --

              The name or key of the environment variable.

            • value (string) --

              The value of the environment variable.

              Warning

              We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .

            • type (string) --

              The type of environment variable. Valid values include:

        • privilegedMode (boolean) --

          Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .

          You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:

          If the operating system's base image is Ubuntu Linux:

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout 15 sh -c "until docker info; do echo .; sleep 1; done"

          If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :

          - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&

          - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

        • certificate (string) --

          The certificate to use with this build project.

        • registryCredential (dict) --

          The credentials for access to a private registry.

          • credential (string) --

            The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

            Note

            The credential can use the name of the credentials only if they exist in your current AWS Region.

          • credentialProvider (string) --

            The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

        • imagePullCredentialsType (string) --

          The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:

          • CODEBUILD specifies that AWS CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust AWS CodeBuild's service principal.
          • SERVICE_ROLE specifies that AWS CodeBuild uses your build project's service role.

          When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.

      • serviceRole (string) --

        The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

      • timeoutInMinutes (integer) --

        How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.

      • queuedTimeoutInMinutes (integer) --

        The number of minutes a build is allowed to be queued before it times out.

      • encryptionKey (string) --

        The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

        Note

        You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.

        You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

      • tags (list) --

        A list of tag key and value pairs associated with this build project.

        These tags are available for use by AWS services that support AWS CodeBuild build project tags.

        • (dict) --

          A tag, consisting of a key and a value.

          This tag is available for use by AWS services that support tags in AWS CodeBuild.

          • key (string) --

            The tag's key.

          • value (string) --

            The tag's value.

      • created (datetime) --

        When the build project was created, expressed in Unix time format.

      • lastModified (datetime) --

        When the build project's settings were last modified, expressed in Unix time format.

      • webhook (dict) --

        Information about a webhook that connects repository events to a build project in AWS CodeBuild.

        • url (string) --

          The URL to the webhook.

        • payloadUrl (string) --

          The AWS CodeBuild endpoint where webhook events are sent.

        • secret (string) --

          The secret token of the associated repository.

          Note

          A Bitbucket webhook does not support secret .

        • branchFilter (string) --

          A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

          Note

          It is recommended that you use filterGroups instead of branchFilter .

        • filterGroups (list) --

          An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

          For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

          • (list) --

            • (dict) --

              A filter used to determine which webhooks trigger a build.

              • type (string) --

                The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

                EVENT

                A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

                Note

                The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

                ACTOR_ACCOUNT_ID

                A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

                HEAD_REF

                A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

                Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

                BASE_REF

                A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

                Note

                Works with pull request events only.

                FILE_PATH

                A webhook triggers a build when the path of a changed file matches the regular expression pattern .

                Note

                Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

                COMMIT_MESSAGE

                A webhook triggers a build when the head commit message matches the regular expression pattern .

                Note

                Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

              • pattern (string) --

                For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

                For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

              • excludeMatchedPattern (boolean) --

                Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

        • lastModifiedSecret (datetime) --

          A timestamp that indicates the last time a repository's secret token was modified.

      • vpcConfig (dict) --

        Information about the VPC configuration that AWS CodeBuild accesses.

        • vpcId (string) --

          The ID of the Amazon VPC.

        • subnets (list) --

          A list of one or more subnet IDs in your Amazon VPC.

          • (string) --
        • securityGroupIds (list) --

          A list of one or more security groups IDs in your Amazon VPC.

          • (string) --
      • badge (dict) --

        Information about the build badge for the build project.

        • badgeEnabled (boolean) --

          Set this to true to generate a publicly accessible URL for your project's build badge.

        • badgeRequestUrl (string) --

          The publicly-accessible URL through which you can access the build badge for your project.

          The publicly accessible URL through which you can access the build badge for your project.

      • logsConfig (dict) --

        Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.

        • cloudWatchLogs (dict) --

          Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.

          • status (string) --

            The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:

            • ENABLED : Amazon CloudWatch Logs are enabled for this build project.
            • DISABLED : Amazon CloudWatch Logs are not enabled for this build project.
          • groupName (string) --

            The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

          • streamName (string) --

            The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .

        • s3Logs (dict) --

          Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.

          • status (string) --

            The current status of the S3 build logs. Valid values are:

            • ENABLED : S3 build logs are enabled for this build project.
            • DISABLED : S3 build logs are not enabled for this build project.
          • location (string) --

            The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .

          • encryptionDisabled (boolean) --

            Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.

      • fileSystemLocations (list) --

        An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.

        • (dict) --

          Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?

          • type (string) --

            The type of the file system. The one supported type is EFS .

          • location (string) --

            A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .

            The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.

          • mountPoint (string) --

            The location in the container where you mount the file system.

          • identifier (string) --

            The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .

            The identifier is used to mount your file system.

          • mountOptions (string) --

            The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
update_report_group(**kwargs)

Updates a report group.

See also: AWS API Documentation

Request Syntax

response = client.update_report_group(
    arn='string',
    exportConfig={
        'exportConfigType': 'S3'|'NO_EXPORT',
        's3Destination': {
            'bucket': 'string',
            'path': 'string',
            'packaging': 'ZIP'|'NONE',
            'encryptionKey': 'string',
            'encryptionDisabled': True|False
        }
    },
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)
Parameters
  • arn (string) --

    [REQUIRED]

    The ARN of the report group to update.

  • exportConfig (dict) --

    Used to specify an updated export type. Valid values are:

    • S3 : The report results are exported to an S3 bucket.
    • NO_EXPORT : The report results are not exported.
    • exportConfigType (string) --

      The export configuration type. Valid values are:

      • S3 : The report results are exported to an S3 bucket.
      • NO_EXPORT : The report results are not exported.
    • s3Destination (dict) --

      A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

      • bucket (string) --

        The name of the S3 bucket where the raw data of a report are exported.

      • path (string) --

        The path to the exported report's raw data results.

      • packaging (string) --

        The type of build output artifact to create. Valid values include:

        • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
        • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
      • encryptionKey (string) --

        The encryption key for the report's encrypted raw data.

      • encryptionDisabled (boolean) --

        A boolean value that specifies if the results of a report are encrypted.

  • tags (list) --

    An updated list of tag key and value pairs associated with this report group.

    These tags are available for use by AWS services that support AWS CodeBuild report group tags.

    • (dict) --

      A tag, consisting of a key and a value.

      This tag is available for use by AWS services that support tags in AWS CodeBuild.

      • key (string) --

        The tag's key.

      • value (string) --

        The tag's value.

Return type

dict

Returns

Response Syntax

{
    'reportGroup': {
        'arn': 'string',
        'name': 'string',
        'type': 'TEST',
        'exportConfig': {
            'exportConfigType': 'S3'|'NO_EXPORT',
            's3Destination': {
                'bucket': 'string',
                'path': 'string',
                'packaging': 'ZIP'|'NONE',
                'encryptionKey': 'string',
                'encryptionDisabled': True|False
            }
        },
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1),
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    • reportGroup (dict) --

      Information about the updated report group.

      • arn (string) --

        The ARN of a ReportGroup .

      • name (string) --

        The name of a ReportGroup .

      • type (string) --

        The type of the ReportGroup . The one valid value is TEST .

      • exportConfig (dict) --

        Information about the destination where the raw data of this ReportGroup is exported.

        • exportConfigType (string) --

          The export configuration type. Valid values are:

          • S3 : The report results are exported to an S3 bucket.
          • NO_EXPORT : The report results are not exported.
        • s3Destination (dict) --

          A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.

          • bucket (string) --

            The name of the S3 bucket where the raw data of a report are exported.

          • path (string) --

            The path to the exported report's raw data results.

          • packaging (string) --

            The type of build output artifact to create. Valid values include:

            • NONE : AWS CodeBuild creates the raw data in the output bucket. This is the default if packaging is not specified.
            • ZIP : AWS CodeBuild creates a ZIP file with the raw data in the output bucket.
          • encryptionKey (string) --

            The encryption key for the report's encrypted raw data.

          • encryptionDisabled (boolean) --

            A boolean value that specifies if the results of a report are encrypted.

      • created (datetime) --

        The date and time this ReportGroup was created.

      • lastModified (datetime) --

        The date and time this ReportGroup was last modified.

      • tags (list) --

        A list of tag key and value pairs associated with this report group.

        These tags are available for use by AWS services that support AWS CodeBuild report group tags.

        • (dict) --

          A tag, consisting of a key and a value.

          This tag is available for use by AWS services that support tags in AWS CodeBuild.

          • key (string) --

            The tag's key.

          • value (string) --

            The tag's value.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
update_webhook(**kwargs)

Updates the webhook associated with an AWS CodeBuild build project.

Note

If you use Bitbucket for your repository, rotateSecret is ignored.

See also: AWS API Documentation

Request Syntax

response = client.update_webhook(
    projectName='string',
    branchFilter='string',
    rotateSecret=True|False,
    filterGroups=[
        [
            {
                'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                'pattern': 'string',
                'excludeMatchedPattern': True|False
            },
        ],
    ]
)
Parameters
  • projectName (string) --

    [REQUIRED]

    The name of the AWS CodeBuild project.

  • branchFilter (string) --

    A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

    Note

    It is recommended that you use filterGroups instead of branchFilter .

  • rotateSecret (boolean) -- A boolean value that specifies whether the associated GitHub repository's secret token should be updated. If you use Bitbucket for your repository, rotateSecret is ignored.
  • filterGroups (list) --

    An array of arrays of WebhookFilter objects used to determine if a webhook event can trigger a build. A filter group must contain at least one EVENT WebhookFilter .

    • (list) --
      • (dict) --

        A filter used to determine which webhooks trigger a build.

        • type (string) -- [REQUIRED]

          The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

          EVENT

          A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

          Note

          The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

          ACTOR_ACCOUNT_ID

          A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

          HEAD_REF

          A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

          Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

          BASE_REF

          A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

          Note

          Works with pull request events only.

          FILE_PATH

          A webhook triggers a build when the path of a changed file matches the regular expression pattern .

          Note

          Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

          COMMIT_MESSAGE

          A webhook triggers a build when the head commit message matches the regular expression pattern .

          Note

          Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

        • pattern (string) -- [REQUIRED]

          For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

          For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

        • excludeMatchedPattern (boolean) --

          Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

Return type

dict

Returns

Response Syntax

{
    'webhook': {
        'url': 'string',
        'payloadUrl': 'string',
        'secret': 'string',
        'branchFilter': 'string',
        'filterGroups': [
            [
                {
                    'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
                    'pattern': 'string',
                    'excludeMatchedPattern': True|False
                },
            ],
        ],
        'lastModifiedSecret': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • webhook (dict) --

      Information about a repository's webhook that is associated with a project in AWS CodeBuild.

      • url (string) --

        The URL to the webhook.

      • payloadUrl (string) --

        The AWS CodeBuild endpoint where webhook events are sent.

      • secret (string) --

        The secret token of the associated repository.

        Note

        A Bitbucket webhook does not support secret .

      • branchFilter (string) --

        A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.

        Note

        It is recommended that you use filterGroups instead of branchFilter .

      • filterGroups (list) --

        An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .

        For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.

        • (list) --

          • (dict) --

            A filter used to determine which webhooks trigger a build.

            • type (string) --

              The type of webhook filter. There are six webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , FILE_PATH , and COMMIT_MESSAGE .

              EVENT

              A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.

              Note

              The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.

              ACTOR_ACCOUNT_ID

              A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .

              HEAD_REF

              A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .

              Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.

              BASE_REF

              A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .

              Note

              Works with pull request events only.

              FILE_PATH

              A webhook triggers a build when the path of a changed file matches the regular expression pattern .

              Note

              Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

              COMMIT_MESSAGE

              A webhook triggers a build when the head commit message matches the regular expression pattern .

              Note

              Works with GitHub and Bitbucket events push and pull requests events. Also works with GitHub Enterprise push events, but does not work with GitHub Enterprise pull request events.

            • pattern (string) --

              For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.

              For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .

            • excludeMatchedPattern (boolean) --

              Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.

      • lastModifiedSecret (datetime) --

        A timestamp that indicates the last time a repository's secret token was modified.

Exceptions

  • CodeBuild.Client.exceptions.InvalidInputException
  • CodeBuild.Client.exceptions.ResourceNotFoundException
  • CodeBuild.Client.exceptions.OAuthProviderException

Paginators

The available paginators are:

class CodeBuild.Paginator.DescribeTestCases
paginator = client.get_paginator('describe_test_cases')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.describe_test_cases().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    reportArn='string',
    filter={
        'status': 'string'
    },
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • reportArn (string) --

    [REQUIRED]

    The ARN of the report for which test cases are returned.

  • filter (dict) --

    A TestCaseFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter test cases. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN . A TestCaseFilter can have one status.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'testCases': [
        {
            'reportArn': 'string',
            'testRawDataPath': 'string',
            'prefix': 'string',
            'name': 'string',
            'status': 'string',
            'durationInNanoSeconds': 123,
            'message': 'string',
            'expired': datetime(2015, 1, 1)
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • testCases (list) --

      The returned list of test cases.

      • (dict) --

        Information about a test case created using a framework such as NUnit or Cucumber. A test case might be a unit test or a configuration test.

        • reportArn (string) --

          The ARN of the report to which the test case belongs.

        • testRawDataPath (string) --

          The path to the raw data file that contains the test result.

        • prefix (string) --

          A string that is applied to a series of related test cases. CodeBuild generates the prefix. The prefix depends on the framework used to generate the tests.

        • name (string) --

          The name of the test case.

        • status (string) --

          The status returned by the test case after it was run. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN .

        • durationInNanoSeconds (integer) --

          The number of nanoseconds it took to run this test case.

        • message (string) --

          A message associated with a test case. For example, an error message or stack trace.

        • expired (datetime) --

          The date and time a test case expires. A test case expires 30 days after it is created. An expired test case is not available to view in CodeBuild.

    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListBuilds
paginator = client.get_paginator('list_builds')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_builds().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortOrder='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortOrder (string) --

    The order to list build IDs. Valid values include:

    • ASCENDING : List the build IDs in ascending order by build ID.
    • DESCENDING : List the build IDs in descending order by build ID.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'ids': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • ids (list) --

      A list of build IDs, with each build ID representing a single build.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListBuildsForProject
paginator = client.get_paginator('list_builds_for_project')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_builds_for_project().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    projectName='string',
    sortOrder='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • projectName (string) --

    [REQUIRED]

    The name of the AWS CodeBuild project.

  • sortOrder (string) --

    The order to list build IDs. Valid values include:

    • ASCENDING : List the build IDs in ascending order by build ID.
    • DESCENDING : List the build IDs in descending order by build ID.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'ids': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • ids (list) --

      A list of build IDs for the specified build project, with each build ID representing a single build.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListProjects
paginator = client.get_paginator('list_projects')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_projects().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
    sortOrder='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortBy (string) --

    The criterion to be used to list build project names. Valid values include:

    • CREATED_TIME : List based on when each build project was created.
    • LAST_MODIFIED_TIME : List based on when information about each build project was last changed.
    • NAME : List based on each build project's name.

    Use sortOrder to specify in what order to list the build project names based on the preceding criteria.

  • sortOrder (string) --

    The order in which to list build projects. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.

    Use sortBy to specify the criterion to be used to list build project names.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'projects': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • projects (list) --

      The list of build project names, with each build project name representing a single build project.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListReportGroups
paginator = client.get_paginator('list_report_groups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_report_groups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortOrder='ASCENDING'|'DESCENDING',
    sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortOrder (string) -- Used to specify the order to sort the list of returned report groups. Valid values are ASCENDING and DESCENDING .
  • sortBy (string) --

    The criterion to be used to list build report groups. Valid values include:

    • CREATED_TIME : List based on when each report group was created.
    • LAST_MODIFIED_TIME : List based on when each report group was last changed.
    • NAME : List based on each report group's name.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'reportGroups': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • reportGroups (list) --

      The list of ARNs for the report groups in the current AWS account.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListReports
paginator = client.get_paginator('list_reports')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_reports().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortOrder='ASCENDING'|'DESCENDING',
    filter={
        'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
    },
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortOrder (string) --

    Specifies the sort order for the list of returned reports. Valid values are:

    • ASCENDING : return reports in chronological order based on their creation date.
    • DESCENDING : return reports in the reverse chronological order based on their creation date.
  • filter (dict) --

    A ReportFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter reports. You can filter using one status only.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'reports': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • reports (list) --

      The list of returned ARNs for the reports in the current AWS account.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListReportsForReportGroup
paginator = client.get_paginator('list_reports_for_report_group')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_reports_for_report_group().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    reportGroupArn='string',
    sortOrder='ASCENDING'|'DESCENDING',
    filter={
        'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
    },
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • reportGroupArn (string) --

    [REQUIRED]

    The ARN of the report group for which you want to return report ARNs.

  • sortOrder (string) -- Use to specify whether the results are returned in ascending or descending order.
  • filter (dict) --

    A ReportFilter object used to filter the returned reports.

    • status (string) --

      The status used to filter reports. You can filter using one status only.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'reports': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • reports (list) --

      The list of report ARNs.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListSharedProjects
paginator = client.get_paginator('list_shared_projects')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_shared_projects().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortBy='ARN'|'MODIFIED_TIME',
    sortOrder='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortBy (string) --

    The criterion to be used to list build projects shared with the current AWS account or user. Valid values include:

    • ARN : List based on the ARN.
    • MODIFIED_TIME : List based on when information about the shared project was last changed.
  • sortOrder (string) --

    The order in which to list shared build projects. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'projects': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • projects (list) --

      The list of ARNs for the build projects shared with the current AWS account or user.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.

class CodeBuild.Paginator.ListSharedReportGroups
paginator = client.get_paginator('list_shared_report_groups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CodeBuild.Client.list_shared_report_groups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    sortOrder='ASCENDING'|'DESCENDING',
    sortBy='ARN'|'MODIFIED_TIME',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • sortOrder (string) --

    The order in which to list shared report groups. Valid values include:

    • ASCENDING : List in ascending order.
    • DESCENDING : List in descending order.
  • sortBy (string) --

    The criterion to be used to list report groups shared with the current AWS account or user. Valid values include:

    • ARN : List based on the ARN.
    • MODIFIED_TIME : List based on when information about the shared report group was last changed.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'reportGroups': [
        'string',
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • reportGroups (list) --

      The list of ARNs for the report groups shared with the current AWS account or user.

      • (string) --
    • NextToken (string) --

      A token to resume pagination.