Table of Contents
A low-level client representing AWS SecurityHub:
import boto3
client = boto3.client('securityhub')
These are the available methods:
Accepts the invitation to be a member account and be monitored by the Security Hub master account that the invitation was sent from.
When the member account accepts the invitation, permission is granted to the master account to view findings generated in the member account.
See also: AWS API Documentation
Request Syntax
response = client.accept_invitation(
MasterId='string',
InvitationId='string'
)
[REQUIRED]
The account ID of the Security Hub master account that sent the invitation.
[REQUIRED]
The ID of the invitation sent from the Security Hub master account.
dict
Response Syntax
{}
Response Structure
Exceptions
Disables the standards specified by the provided StandardsSubscriptionArns .
For more information, see Security Standards section of the AWS Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.batch_disable_standards(
StandardsSubscriptionArns=[
'string',
]
)
[REQUIRED]
The ARNs of the standards subscriptions to disable.
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE'
},
]
}
Response Structure
The details of the standards subscriptions that were disabled.
A resource that represents your subscription to a supported standard.
The ARN of a resource that represents your subscription to a supported standard.
The ARN of a standard.
A key-value pair of input for the standard.
The status of the standards subscription.
Exceptions
Enables the standards specified by the provided StandardsArn . To obtain the ARN for a standard, use the `` DescribeStandards `` operation.
For more information, see the Security Standards section of the AWS Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.batch_enable_standards(
StandardsSubscriptionRequests=[
{
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
}
},
]
)
[REQUIRED]
The list of standards checks to enable.
The standard that you want to enable.
The ARN of the standard that you want to enable. To view the list of available standards and their ARNs, use the `` DescribeStandards `` operation.
A key-value pair of input for the standard.
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE'
},
]
}
Response Structure
The details of the standards subscriptions that were enabled.
A resource that represents your subscription to a supported standard.
The ARN of a resource that represents your subscription to a supported standard.
The ARN of a standard.
A key-value pair of input for the standard.
The status of the standards subscription.
Exceptions
Imports security findings generated from an integrated third-party product into Security Hub. This action is requested by the integrated product to import its findings into Security Hub.
The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
See also: AWS API Documentation
Request Syntax
response = client.batch_import_findings(
Findings=[
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'Tags': {
'string': 'string'
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string'
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Environment': {
'Certificate': 'string',
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
}
},
'AwsCloudFrontDistribution': {
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string'
},
]
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string'
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
]
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
}
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'RoleId': 'string',
'RoleName': 'string',
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string'
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
]
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'Container': {
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string'
},
'Other': {
'string': 'string'
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string'
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
]
},
]
)
[REQUIRED]
A list of findings to import. To successfully import a finding, it must follow the AWS Security Finding Format . Maximum of 100 findings per request.
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between AWS security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by AWS services (Amazon GuardDuty, Amazon Inspector, and Amazon Macie) or by the integrated third-party solutions and standards checks.
The schema version that a finding is formatted for.
The security findings provider-specific identifier for a finding.
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
The AWS account ID that a finding is generated in.
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
An ISO8601-formatted timestamp that indicates when the security-findings provider created the potential security issue that a finding captured.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A finding's severity.
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the AWS service or integrated partner product that generated the finding.
The severity value of the finding. The allowed values are the following.
If you provide Normalized and do not provide Label , then Label is set automatically as follows.
Deprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
The native severity from the finding product that generated the finding.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A finding's title.
Note
In this release, Title is a required property.
A finding's description.
Note
In this release, Description is a required property.
A data type that describes the remediation options for a finding.
A recommendation on the steps to take to remediate the issue identified by a finding.
Describes the recommended steps to take to remediate an issue identified in a finding.
A URL to a page or site that contains information about how to remediate a finding.
A URL that links to a page about the current finding in the security-findings provider's solution.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A list of malware related to a finding.
A list of malware related to a finding.
The name of the malware that was observed.
The type of the malware that was observed.
The file system path of the malware that was observed.
The state of the malware that was observed.
The details of network-related information about a finding.
The direction of network traffic associated with a finding.
The protocol of network-related information about a finding.
The range of open ports that is present on the network.
The first port in the port range.
The last port in the port range.
The source IPv4 address of network-related information about a finding.
The source IPv6 address of network-related information about a finding.
The source port of network-related information about a finding.
The source domain of network-related information about a finding.
The source media access control (MAC) address of network-related information about a finding.
The destination IPv4 address of network-related information about a finding.
The destination IPv6 address of network-related information about a finding.
The destination port of network-related information about a finding.
The destination domain of network-related information about a finding.
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
Information about a network path component.
The identifier of a component in the network path.
The type of component.
Information about the component that comes after the current component in the network path.
The protocol used for the component.
Information about the destination of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the origin of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the component that comes before the current node in the network path.
The protocol used for the component.
Information about the destination of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the origin of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
The details of process-related information about a finding.
The name of the process.
The path to the process executable.
The process ID.
The parent process ID.
The date/time that the process was launched.
The date and time when the process was terminated.
Threat intelligence details related to a finding.
Details about the threat intelligence related to a finding.
The type of threat intelligence indicator.
The value of a threat intelligence indicator.
The category of a threat intelligence indicator.
The date and time when the most recent instance of a threat intelligence indicator was observed.
The source of the threat intelligence indicator.
The URL to the page or site where you can get more information about the threat intelligence indicator.
A set of resource data types that describe the resources that the finding refers to.
A resource related to a finding.
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
The canonical identifier for the given resource type.
The canonical AWS partition name that the Region is assigned to.
The canonical AWS external Region name where this resource is located.
A list of AWS tags associated with a resource at the time the finding was processed.
Additional details about the resource related to a finding.
Details for an autoscaling group.
The name of the launch configuration.
The list of load balancers associated with the group.
The service to use for the health checks.
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
The datetime when the auto scaling group was created.
Details for an AWS CodeBuild project.
The AWS Key Management Service (AWS KMS) customer master key (CMK) used to encrypt the build output artifacts.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK alias (using the format alias/alias-name).
Information about the build environment for this build project.
The certificate to use with this build project.
The type of credentials AWS CodeBuild uses to pull images in your build.
Valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for AWS Secrets Manager.
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
The name of the build project.
Information about the build input source code for this build project.
The type of repository that contains the source code to be built. Valid values are:
Information about the location of the source code to be built.
Valid values include:
Information about the Git clone depth for the build project.
Whether to ignore SSL warnings while connecting to the project source code.
The ARN of the IAM role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
Information about the VPC configuration that AWS CodeBuild accesses.
The ID of the VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security group IDs in your Amazon VPC.
Details about a CloudFront distribution.
The domain name corresponding to the distribution.
The entity tag is a hash of the object.
The date and time that the distribution was last modified.
A complex type that controls whether access logs are written for the distribution.
The Amazon S3 bucket to store the access logs in.
With this field, you can enable or disable the selected distribution.
Specifies whether you want CloudFront to include cookies in access logs.
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
A complex type that contains information about origins for this distribution.
A complex type that contains origins or origin groups for this distribution.
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), Amazon Elemental MediaStore, or other server from which CloudFront gets your files.
Amazon S3 origins: The DNS name of the Amazon S3 bucket from which you want CloudFront to get objects for this origin.
A unique identifier for the origin or origin group.
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
Indicates the current status of the distribution.
A unique identifier that specifies the AWS WAF web ACL, if any, to associate with this distribution.
Details about an Amazon EC2 instance related to a finding.
The instance type of the instance.
The Amazon Machine Image (AMI) ID of the instance.
The IPv4 addresses associated with the instance.
The IPv6 addresses associated with the instance.
The key name associated with the instance.
The IAM profile ARN of the instance.
The identifier of the VPC that the instance was launched in.
The identifier of the subnet that the instance was launched in.
The date/time the instance was launched.
Details for an Amazon EC2 network interface.
The network interface attachment.
The timestamp indicating when the attachment initiated.
The identifier of the network interface attachment
Indicates whether the network interface is deleted when the instance is terminated.
The device index of the network interface attachment on the instance.
The ID of the instance.
The AWS account ID of the owner of the instance.
The attachment state.
Valid values: attaching | attached | detaching | detached
The ID of the network interface.
Security groups for the network interface.
A security group associated with the network interface.
The name of the security group.
The ID of the security group.
Indicates whether traffic to or from the instance is validated.
Details for an EC2 security group.
The name of the security group.
The ID of the security group.
The AWS account ID of the owner of the security group.
[VPC only] The ID of the VPC for the security group.
The inbound rules associated with the security group.
An IP permission for an EC2 security group.
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The security group and AWS account ID pairs.
A relationship between a security group and a user.
The ID of the security group.
The name of the security group.
The status of a VPC peering connection, if applicable.
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
The ID of the VPC for the referenced security group, if applicable.
The ID of the VPC peering connection, if applicable.
The IPv4 ranges.
A range of IPv4 addresses.
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
The IPv6 ranges.
A range of IPv6 addresses.
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
A prefix list ID.
The ID of the prefix.
[VPC only] The outbound rules associated with the security group.
An IP permission for an EC2 security group.
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The security group and AWS account ID pairs.
A relationship between a security group and a user.
The ID of the security group.
The name of the security group.
The status of a VPC peering connection, if applicable.
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
The ID of the VPC for the referenced security group, if applicable.
The ID of the VPC peering connection, if applicable.
The IPv4 ranges.
A range of IPv4 addresses.
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
The IPv6 ranges.
A range of IPv6 addresses.
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
A prefix list ID.
The ID of the prefix.
Details for an EC2 volume.
The datetime when the volume was created.
Whether the volume is encrypted.
The size of the volume, in GiBs.
The snapshot from which the volume was created.
The volume state.
The ARN of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the volume.
The volume attachments.
An attachment to an AWS EC2 volume.
The datetime when the attachment initiated.
Whether the EBS volume is deleted when the EC2 instance is terminated.
The identifier of the EC2 instance.
The attachment state of the volume.
Details for an EC2 VPC.
Information about the IPv4 CIDR blocks associated with the VPC.
An IPv4 CIDR block association.
The association ID for the IPv4 CIDR block.
The IPv4 CIDR block.
Information about the state of the IPv4 CIDR block.
Information about the IPv6 CIDR blocks associated with the VPC.
An IPV6 CIDR block association.
The association ID for the IPv6 CIDR block.
The IPv6 CIDR block.
Information about the state of the CIDR block.
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
The current state of the VPC.
Details about a load balancer.
The Availability Zones for the load balancer.
Information about an Availability Zone.
The name of the Availability Zone.
The ID of the subnet. You can specify one subnet per Availability Zone.
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
The date and time the load balancer was created.
The public DNS name of the load balancer.
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
The nodes of an Internet-facing load balancer have public IP addresses.
The IDs of the security groups for the load balancer.
The state of the load balancer.
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
A description of the state.
The type of load balancer.
The ID of the VPC for the load balancer.
Details for an Elasticsearch domain.
IAM policy document specifying the access policies for the new Amazon ES domain.
Additional options for the domain endpoint.
Whether to require that all traffic to the domain arrive over HTTPS.
The TLS security policy to apply to the HTTPS endpoint of the Elasticsearch domain.
Valid values:
Unique identifier for an Amazon ES domain.
Name of an Amazon ES domain.
Domain names are unique across all domains owned by the same account within an AWS Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Domain-specific endpoint used to submit index, search, and data upload requests to an Amazon ES domain.
The endpoint is a service URL.
The key-value pair that exists if the Amazon ES domain uses VPC endpoints.
Elasticsearch version.
Details about the configuration for encryption at rest.
Whether encryption at rest is enabled.
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a.
Details about the configuration for node-to-node encryption.
Whether node-to-node encryption is enabled.
Information that Amazon ES derives based on VPCOptions for the domain.
The list of Availability Zones associated with the VPC subnets.
The list of security group IDs associated with the VPC endpoints for the domain.
A list of subnet IDs associated with the VPC endpoints for the domain.
ID for the VPC.
Details about an Amazon S3 bucket related to a finding.
The canonical user ID of the owner of the S3 bucket.
The display name of the owner of the S3 bucket.
The date and time when the S3 bucket was created.
The encryption rules that are applied to the S3 bucket.
The encryption rules that are applied to the S3 bucket.
An encryption rule to apply to the S3 bucket.
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
Server-side encryption algorithm to use for the default encryption.
AWS KMS customer master key (CMK) ID to use for the default encryption.
Details about an Amazon S3 object related to a finding.
The date and time when the object was last modified.
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
The version of the object.
A standard MIME type describing the format of the object data.
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
The identifier of the AWS Key Management Service (AWS KMS) symmetric customer managed customer master key (CMK) that was used for the object.
Details about an IAM access key related to a finding.
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
The status of the IAM access key related to a finding.
The creation date/time of the IAM access key related to a finding.
The ID of the principal associated with an access key.
The type of principal associated with an access key.
The name of the principal.
Details about an IAM role.
The trust policy that grants permission to assume the role.
The date and time, in ISO 8601 date-time format, when the role was created.
The stable and unique string identifying the role.
The friendly name that identifies the role.
The maximum session duration (in seconds) that you want to set for the specified role.
The path to the role.
Details about a KMS key.
The twelve-digit account ID of the AWS account that owns the CMK.
The date and time when the CMK was created.
The globally unique identifier for the CMK.
The manager of the CMK. CMKs in your AWS account are either customer managed or AWS managed.
The state of the CMK.
The source of the CMK's key material.
When this value is AWS_KMS , AWS KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the CMK lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the AWS CloudHSM cluster associated with a custom key store.
Details about a Lambda function.
An AwsLambdaFunctionCode object.
An Amazon S3 bucket in the same AWS Region as your function. The bucket can be in a different AWS account.
The Amazon S3 key of the deployment package.
For versioned objects, the version of the deployment package object to use.
The base64-encoded contents of the deployment package. AWS SDK and AWS CLI clients handle the encoding for you.
The SHA256 hash of the function's deployment package.
The function's dead letter queue.
The Amazon Resource Name (ARN) of an Amazon SQS queue or Amazon SNS topic.
The function's environment variables.
Environment variable key-value pairs.
An AwsLambdaFunctionEnvironmentError object.
The error code.
The error message.
The name of the function.
The function that Lambda calls to begin executing your function.
The KMS key that's used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed CMK.
The date and time that the function was last updated, in ISO-8601 format (YYYY-MM-DDThh:mm:ss.sTZD).
The function's layers.
An AWS Lambda layer.
The Amazon Resource Name (ARN) of the function layer.
The size of the layer archive in bytes.
For Lambda@Edge functions, the ARN of the master function.
The memory that's allocated to the function.
The latest updated revision of the function or alias.
The function's execution role.
The runtime environment for the Lambda function.
The amount of time that Lambda allows a function to run before stopping it.
The function's AWS X-Ray tracing configuration.
The tracing mode.
The function's networking configuration.
A list of VPC security groups IDs.
A list of VPC subnet IDs.
The ID of the VPC.
The version of the Lambda function.
Details for a Lambda layer version.
The version number.
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
The date that the version was created, in ISO 8601 format. For example, 2018-11-27T15:10:45.123+0000.
Details for an Amazon RDS database instance.
The AWS Identity and Access Management (IAM) roles associated with the DB instance.
An AWS Identity and Access Management (IAM) role associated with the DB instance.
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB instance.
The name of the feature associated with the IAM)role.
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
The identifier of the CA certificate for this DB instance.
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
Contains the name of the compute and memory capacity class of the DB instance.
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
The AWS Region-unique, immutable identifier for the DB instance. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB instance is accessed.
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Specifies the connection endpoint.
Specifies the DNS address of the DB instance.
Specifies the port that the database engine is listening on.
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Provides the name of the database engine to use for this DB instance.
Indicates the database engine version.
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
Provides the date and time the DB instance was created.
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB instance.
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
Specifies whether the DB instance is encrypted.
The ARN from the key store with which the instance is associated for TDE encryption.
A list of VPC security groups that the DB instance belongs to.
A VPC security groups that the DB instance belongs to.
The name of the VPC security group.
The status of the VPC security group.
Details about an SNS topic.
The ID of an AWS managed customer master key (CMK) for Amazon SNS or a custom CMK.
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
A wrapper type for the attributes of an Amazon SNS subscription.
The subscription's endpoint (format depends on the protocol).
The subscription's protocol.
The name of the topic.
The subscription's owner.
Details about an SQS queue.
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again.
The ID of an AWS managed customer master key (CMK) for Amazon SQS or a custom CMK.
The name of the new queue.
The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
Details for a WAF WebACL.
A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it.
The action to perform if none of the rules contained in the WebACL match.
An array that contains the action for each rule in a WebACL, the priority of the rule, and the ID of the rule.
Details for a rule in a WAF WebACL.
Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the rule.
Specifies how you want AWS WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
Rules to exclude from a rule group.
Details about a rule to exclude from a rule group.
The unique identifier for the rule to exclude from the rule group.
Use the OverrideAction to test your RuleGroup.
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup, set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
COUNT overrides the action specified by the individual rule within a RuleGroup .
If set to NONE , the rule's action takes place.
Specifies the order in which the rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a WebACL, the values do not need to be consecutive.
The identifier for a rule.
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
A unique identifier for a WebACL.
Details about a container resource related to a finding.
The name of the container related to a finding.
The identifier of the image related to a finding.
The name of the image related to a finding.
The date and time when the container started.
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS AWS Foundations. Contains security standard-related finding details.
The result of a standards check.
The valid values for Status are as follows.
For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
Provides additional context for the value of Compliance.Status .
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
The corresponding description for the status reason code.
Indicates the veracity of a finding.
The workflow state of a finding.
Provides information about the status of the investigation into a finding.
The status of the investigation into the finding. The allowed values are the following.
The record state of a finding.
A list of related findings.
Details about a related finding.
The ARN of the product that generated a related finding.
The product-generated identifier for a related finding.
A user-defined note added to a finding.
The text of a note.
The principal that created a note.
The timestamp of when the note was updated.
Provides a list of vulnerabilities associated with the findings.
A vulnerability associated with a finding.
The identifier of the vulnerability.
List of software packages that have the vulnerability.
Information about a software package.
The name of the software package.
The version of the software package.
The epoch of the software package.
The release of the software package.
The architecture used for the software package.
CVSS scores from the advisory related to the vulnerability.
CVSS scores from the advisory related to the vulnerability.
The version of CVSS for the CVSS score.
The base CVSS score.
The base scoring vector for the CVSS score.
List of vulnerabilities that are related to this vulnerability.
Information about the vendor that generates the vulnerability report.
The name of the vendor.
The URL of the vulnerability advisory.
The severity that the vendor assigned to the vulnerability.
The datetime when the vulnerability advisory was created.
The datetime when the vulnerability advisory was last updated.
A list of URLs that provide additional information about the vulnerability.
{
'FailedCount': 123,
'SuccessCount': 123,
'FailedFindings': [
{
'Id': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
The number of findings that failed to import.
The number of findings that were successfully imported.
The list of findings that failed to import.
The list of the findings that cannot be imported. For each finding, the list provides the error.
The identifier of the finding that could not be updated.
The code of the error returned by the BatchImportFindings operation.
The message of the error returned by the BatchImportFindings operation.
Exceptions
Used by Security Hub customers to update information about their investigation into a finding. Requested by master accounts or member accounts. Master accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
Master accounts can use BatchUpdateFindings to update the following finding fields and objects.
Member accounts can only use BatchUpdateFindings to update the Note object.
See also: AWS API Documentation
Request Syntax
response = client.batch_update_findings(
FindingIdentifiers=[
{
'Id': 'string',
'ProductArn': 'string'
},
],
Note={
'Text': 'string',
'UpdatedBy': 'string'
},
Severity={
'Normalized': 123,
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL'
},
VerificationState='UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
Confidence=123,
Criticality=123,
Types=[
'string',
],
UserDefinedFields={
'string': 'string'
},
Workflow={
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
RelatedFindings=[
{
'ProductArn': 'string',
'Id': 'string'
},
]
)
[REQUIRED]
The list of findings to update. BatchUpdateFindings can be used to update up to 100 findings at a time.
For each finding, the list provides the finding identifier and the ARN of the finding provider.
Identifies a finding to update using BatchUpdateFindings .
The identifier of the finding that was specified by the finding provider.
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
The updated note.
The updated note text.
The principal that updated the note.
Used to update the finding severity.
The normalized severity for the finding. This attribute is to be deprecated in favor of Label .
If you provide Normalized and do not provide Label , Label is set automatically as follows.
The native severity as defined by the AWS service or integrated partner product that generated the finding.
The severity value of the finding. The allowed values are the following.
Indicates the veracity of a finding.
The available values for VerificationState are as follows.
The updated value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
The updated value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are as follows.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Used to update the workflow status of a finding.
The workflow status indicates the progress of the investigation into the finding.
The status of the investigation into the finding. The allowed values are the following.
A list of findings that are related to the updated findings.
Details about a related finding.
The ARN of the product that generated a related finding.
The product-generated identifier for a related finding.
dict
Response Syntax
{
'ProcessedFindings': [
{
'Id': 'string',
'ProductArn': 'string'
},
],
'UnprocessedFindings': [
{
'FindingIdentifier': {
'Id': 'string',
'ProductArn': 'string'
},
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
ProcessedFindings (list) --
The list of findings that were updated successfully.
(dict) --
Identifies a finding to update using BatchUpdateFindings .
Id (string) --
The identifier of the finding that was specified by the finding provider.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
UnprocessedFindings (list) --
The list of findings that were not updated.
(dict) --
A finding from a BatchUpdateFindings request that Security Hub was unable to update.
FindingIdentifier (dict) --
The identifier of the finding that was not updated.
Id (string) --
The identifier of the finding that was specified by the finding provider.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
ErrorCode (string) --
The code associated with the error.
ErrorMessage (string) --
The message associated with the error.
Exceptions
Check if an operation can be paginated.
Creates a custom action target in Security Hub.
You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
See also: AWS API Documentation
Request Syntax
response = client.create_action_target(
Name='string',
Description='string',
Id='string'
)
[REQUIRED]
The name of the custom action target.
[REQUIRED]
The description for the custom action target.
[REQUIRED]
The ID for the custom action target.
dict
Response Syntax
{
'ActionTargetArn': 'string'
}
Response Structure
(dict) --
ActionTargetArn (string) --
The ARN for the custom action target.
Exceptions
Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
To group the related findings in the insight, use the GroupByAttribute .
See also: AWS API Documentation
Request Syntax
response = client.create_insight(
Name='string',
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
GroupByAttribute='string'
)
[REQUIRED]
The name of the custom insight to create.
[REQUIRED]
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The AWS account ID that a finding is generated in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's description.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The type of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The state of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Indicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the process.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The path to the process executable.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Specifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS external Region name where this resource is located.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of AWS tags associated with a resource at the time the finding was processed.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The instance type of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of the container related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The veracity of a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the investigation into a finding. Allowed values are the following.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The updated record state for the finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The text of a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
[REQUIRED]
The attribute used to group the findings for the insight. The grouping attribute identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
dict
Response Syntax
{
'InsightArn': 'string'
}
Response Structure
(dict) --
InsightArn (string) --
The ARN of the insight created.
Exceptions
Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the master account. To successfully create a member, you must use this action from an account that already has Security Hub enabled. To enable Security Hub, you can use the `` EnableSecurityHub `` operation.
After you use CreateMembers to create member account associations in Security Hub, you must use the `` InviteMembers `` operation to invite the accounts to enable Security Hub and become member accounts in Security Hub.
If the account owner accepts the invitation, the account becomes a member account in Security Hub. A permissions policy is added that permits the master account to view the findings generated in the member account. When Security Hub is enabled in the invited account, findings start to be sent to both the member and master accounts.
To remove the association between the master and member accounts, use the `` DisassociateFromMasterAccount `` or `` DisassociateMembers `` operation.
See also: AWS API Documentation
Request Syntax
response = client.create_members(
AccountDetails=[
{
'AccountId': 'string',
'Email': 'string'
},
]
)
The list of accounts to associate with the Security Hub master account. For each account, the list includes the account ID and the email address.
The details of an AWS account.
The ID of an AWS account.
The email of an AWS account.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of AWS accounts that were not processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Declines invitations to become a member account.
See also: AWS API Documentation
Request Syntax
response = client.decline_invitations(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs for the accounts from which to decline the invitations to Security Hub.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of AWS accounts that were not processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Deletes a custom action target from Security Hub.
Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
See also: AWS API Documentation
Request Syntax
response = client.delete_action_target(
ActionTargetArn='string'
)
[REQUIRED]
The ARN of the custom action target to delete.
{
'ActionTargetArn': 'string'
}
Response Structure
The ARN of the custom action target that was deleted.
Exceptions
Deletes the insight specified by the InsightArn .
See also: AWS API Documentation
Request Syntax
response = client.delete_insight(
InsightArn='string'
)
[REQUIRED]
The ARN of the insight to delete.
{
'InsightArn': 'string'
}
Response Structure
The ARN of the insight that was deleted.
Exceptions
Deletes invitations received by the AWS account to become a member account.
See also: AWS API Documentation
Request Syntax
response = client.delete_invitations(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of the account IDs that sent the invitations to delete.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of AWS accounts for which the invitations were not deleted. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Deletes the specified member accounts from Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.delete_members(
AccountIds=[
'string',
]
)
The list of account IDs for the member accounts to delete.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of AWS accounts that were not deleted. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Returns a list of the custom action targets in Security Hub in your account.
See also: AWS API Documentation
Request Syntax
response = client.describe_action_targets(
ActionTargetArns=[
'string',
],
NextToken='string',
MaxResults=123
)
A list of custom action target ARNs for the custom action targets to retrieve.
The token that is required for pagination. On your first call to the DescribeActionTargets operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'ActionTargets': [
{
'ActionTargetArn': 'string',
'Name': 'string',
'Description': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ActionTargets (list) --
A list of ActionTarget objects. Each object includes the ActionTargetArn , Description , and Name of a custom action target available in Security Hub.
(dict) --
An ActionTarget object.
ActionTargetArn (string) --
The ARN for the target action.
Name (string) --
The name of the action target.
Description (string) --
The description of the target action.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.describe_hub(
HubArn='string'
)
{
'HubArn': 'string',
'SubscribedAt': 'string',
'AutoEnableControls': True|False
}
Response Structure
The ARN of the Hub resource that was retrieved.
The date and time when Security Hub was enabled in the account.
Whether to automatically enable new controls when they are added to standards that are enabled.
If set to true , then new controls for enabled standards are enabled automatically. If set to false , then new controls are not enabled.
Exceptions
Returns information about the available products that you can subscribe to and integrate with Security Hub in order to consolidate findings.
See also: AWS API Documentation
Request Syntax
response = client.describe_products(
NextToken='string',
MaxResults=123
)
The token that is required for pagination. On your first call to the DescribeProducts operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Products': [
{
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Description': 'string',
'Categories': [
'string',
],
'IntegrationTypes': [
'SEND_FINDINGS_TO_SECURITY_HUB'|'RECEIVE_FINDINGS_FROM_SECURITY_HUB',
],
'MarketplaceUrl': 'string',
'ActivationUrl': 'string',
'ProductSubscriptionResourcePolicy': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Products (list) --
A list of products, including details for each product.
(dict) --
Contains details about a product.
ProductArn (string) --
The ARN assigned to the product.
ProductName (string) --
The name of the product.
CompanyName (string) --
The name of the company that provides the product.
Description (string) --
A description of the product.
Categories (list) --
The categories assigned to the product.
IntegrationTypes (list) --
The types of integration that the product supports. Available values are the following.
MarketplaceUrl (string) --
The URL for the page that contains more information about the product.
ActivationUrl (string) --
The URL used to activate the product.
ProductSubscriptionResourcePolicy (string) --
The resource policy associated with the product.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns a list of the available standards in Security Hub.
For each standard, the results include the standard ARN, the name, and a description.
See also: AWS API Documentation
Request Syntax
response = client.describe_standards(
NextToken='string',
MaxResults=123
)
The token that is required for pagination. On your first call to the DescribeStandards operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Standards': [
{
'StandardsArn': 'string',
'Name': 'string',
'Description': 'string',
'EnabledByDefault': True|False
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Standards (list) --
A list of available standards.
(dict) --
Provides information about a specific standard.
StandardsArn (string) --
The ARN of a standard.
Name (string) --
The name of the standard.
Description (string) --
A description of the standard.
EnabledByDefault (boolean) --
Whether the standard is enabled by default. When Security Hub is enabled from the console, if a standard is enabled by default, the check box for that standard is selected by default.
When Security Hub is enabled using the EnableSecurityHub API operation, the standard is enabled by default unless EnableDefaultStandards is set to false .
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns a list of security standards controls.
For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
See also: AWS API Documentation
Request Syntax
response = client.describe_standards_controls(
StandardsSubscriptionArn='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The ARN of a resource that represents your subscription to a supported standard.
The token that is required for pagination. On your first call to the DescribeStandardsControls operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Controls': [
{
'StandardsControlArn': 'string',
'ControlStatus': 'ENABLED'|'DISABLED',
'DisabledReason': 'string',
'ControlStatusUpdatedAt': datetime(2015, 1, 1),
'ControlId': 'string',
'Title': 'string',
'Description': 'string',
'RemediationUrl': 'string',
'SeverityRating': 'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'RelatedRequirements': [
'string',
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Controls (list) --
A list of security standards controls.
(dict) --
Details for an individual security standard control.
StandardsControlArn (string) --
The ARN of the security standard control.
ControlStatus (string) --
The current status of the security standard control. Indicates whether the control is enabled or disabled. Security Hub does not check against disabled controls.
DisabledReason (string) --
The reason provided for the most recent change in status for the control.
ControlStatusUpdatedAt (datetime) --
The date and time that the status of the security standard control was most recently updated.
ControlId (string) --
The identifier of the security standard control.
Title (string) --
The title of the security standard control.
Description (string) --
The longer description of the security standard control. Provides information about what the control is checking for.
RemediationUrl (string) --
A link to remediation information for the control in the Security Hub user documentation.
SeverityRating (string) --
The severity of findings generated from this security standard control.
The finding severity is based on an assessment of how easy it would be to compromise AWS resources if the issue is detected.
RelatedRequirements (list) --
The list of requirements that are related to this control.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.disable_import_findings_for_product(
ProductSubscriptionArn='string'
)
[REQUIRED]
The ARN of the integrated product to disable the integration for.
{}
Response Structure
Exceptions
Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
When you disable Security Hub for a master account, it doesn't disable Security Hub for any associated member accounts.
When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your master and member account associations are removed.
If you want to save your existing findings, you must export them before you disable Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.disable_security_hub()
{}
Response Structure
Exceptions
Disassociates the current Security Hub member account from the associated master account.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_from_master_account()
{}
Response Structure
Exceptions
Disassociates the specified member accounts from the associated master account.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_members(
AccountIds=[
'string',
]
)
The account IDs of the member accounts to disassociate from the master account.
{}
Response Structure
Exceptions
Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
See also: AWS API Documentation
Request Syntax
response = client.enable_import_findings_for_product(
ProductArn='string'
)
[REQUIRED]
The ARN of the product to enable the integration for.
{
'ProductSubscriptionArn': 'string'
}
Response Structure
The ARN of your subscription to the product to enable integrations for.
Exceptions
Enables Security Hub for your account in the current Region or the Region you specify in the request.
When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards.
You do not enable the Payment Card Industry Data Security Standard (PCI DSS) standard.
To not enable the automatically enabled standards, set EnableDefaultStandards to false .
After you enable Security Hub, to enable a standard, use the `` BatchEnableStandards `` operation. To disable a standard, use the `` BatchDisableStandards `` operation.
To learn more, see Setting Up AWS Security Hub in the AWS Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.enable_security_hub(
Tags={
'string': 'string'
},
EnableDefaultStandards=True|False
)
The tags to add to the hub resource when you enable Security Hub.
dict
Response Syntax
{}
Response Structure
Exceptions
Generate a presigned url given a client, its method, and arguments
The presigned url
Returns a list of the standards that are currently enabled.
See also: AWS API Documentation
Request Syntax
response = client.get_enabled_standards(
StandardsSubscriptionArns=[
'string',
],
NextToken='string',
MaxResults=123
)
The list of the standards subscription ARNs for the standards to retrieve.
The token that is required for pagination. On your first call to the GetEnabledStandards operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
StandardsSubscriptions (list) --
The list of StandardsSubscriptions objects that include information about the enabled standards.
(dict) --
A resource that represents your subscription to a supported standard.
StandardsSubscriptionArn (string) --
The ARN of a resource that represents your subscription to a supported standard.
StandardsArn (string) --
The ARN of a standard.
StandardsInput (dict) --
A key-value pair of input for the standard.
StandardsStatus (string) --
The status of the standards subscription.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns a list of findings that match the specified criteria.
See also: AWS API Documentation
Request Syntax
response = client.get_findings(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
SortCriteria=[
{
'Field': 'string',
'SortOrder': 'asc'|'desc'
},
],
NextToken='string',
MaxResults=123
)
The finding attributes used to define a condition to filter the returned findings.
Note that in the available filter fields, WorkflowState is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The AWS account ID that a finding is generated in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's description.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The type of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The state of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Indicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the process.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The path to the process executable.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Specifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS external Region name where this resource is located.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of AWS tags associated with a resource at the time the finding was processed.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The instance type of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of the container related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The veracity of a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the investigation into a finding. Allowed values are the following.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The updated record state for the finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The text of a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding attributes used to sort the list of returned findings.
A collection of finding attributes used to sort findings.
The finding attribute used to sort findings.
The order used to sort findings.
The token that is required for pagination. On your first call to the GetFindings operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Findings': [
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'Tags': {
'string': 'string'
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string'
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Environment': {
'Certificate': 'string',
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
}
},
'AwsCloudFrontDistribution': {
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string'
},
]
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string'
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
]
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
}
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'RoleId': 'string',
'RoleName': 'string',
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string'
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
]
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'Container': {
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string'
},
'Other': {
'string': 'string'
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string'
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Findings (list) --
The findings that matched the filters specified in the request.
(dict) --
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between AWS security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by AWS services (Amazon GuardDuty, Amazon Inspector, and Amazon Macie) or by the integrated third-party solutions and standards checks.
SchemaVersion (string) --
The schema version that a finding is formatted for.
Id (string) --
The security findings provider-specific identifier for a finding.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
GeneratorId (string) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
AwsAccountId (string) --
The AWS account ID that a finding is generated in.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
FirstObservedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
LastObservedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
CreatedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider created the potential security issue that a finding captured.
UpdatedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
Severity (dict) --
A finding's severity.
Product (float) --
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the AWS service or integrated partner product that generated the finding.
Label (string) --
The severity value of the finding. The allowed values are the following.
If you provide Normalized and do not provide Label , then Label is set automatically as follows.
Normalized (integer) --
Deprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
Original (string) --
The native severity from the finding product that generated the finding.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
Title (string) --
A finding's title.
Note
In this release, Title is a required property.
Description (string) --
A finding's description.
Note
In this release, Description is a required property.
Remediation (dict) --
A data type that describes the remediation options for a finding.
Recommendation (dict) --
A recommendation on the steps to take to remediate the issue identified by a finding.
Text (string) --
Describes the recommended steps to take to remediate an issue identified in a finding.
Url (string) --
A URL to a page or site that contains information about how to remediate a finding.
SourceUrl (string) --
A URL that links to a page about the current finding in the security-findings provider's solution.
ProductFields (dict) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
UserDefinedFields (dict) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Malware (list) --
A list of malware related to a finding.
(dict) --
A list of malware related to a finding.
Name (string) --
The name of the malware that was observed.
Type (string) --
The type of the malware that was observed.
Path (string) --
The file system path of the malware that was observed.
State (string) --
The state of the malware that was observed.
Network (dict) --
The details of network-related information about a finding.
Direction (string) --
The direction of network traffic associated with a finding.
Protocol (string) --
The protocol of network-related information about a finding.
OpenPortRange (dict) --
The range of open ports that is present on the network.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
SourceIpV4 (string) --
The source IPv4 address of network-related information about a finding.
SourceIpV6 (string) --
The source IPv6 address of network-related information about a finding.
SourcePort (integer) --
The source port of network-related information about a finding.
SourceDomain (string) --
The source domain of network-related information about a finding.
SourceMac (string) --
The source media access control (MAC) address of network-related information about a finding.
DestinationIpV4 (string) --
The destination IPv4 address of network-related information about a finding.
DestinationIpV6 (string) --
The destination IPv6 address of network-related information about a finding.
DestinationPort (integer) --
The destination port of network-related information about a finding.
DestinationDomain (string) --
The destination domain of network-related information about a finding.
NetworkPath (list) --
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
(dict) --
Information about a network path component.
ComponentId (string) --
The identifier of a component in the network path.
ComponentType (string) --
The type of component.
Egress (dict) --
Information about the component that comes after the current component in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Ingress (dict) --
Information about the component that comes before the current node in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Process (dict) --
The details of process-related information about a finding.
Name (string) --
The name of the process.
Path (string) --
The path to the process executable.
Pid (integer) --
The process ID.
ParentPid (integer) --
The parent process ID.
LaunchedAt (string) --
The date/time that the process was launched.
TerminatedAt (string) --
The date and time when the process was terminated.
ThreatIntelIndicators (list) --
Threat intelligence details related to a finding.
(dict) --
Details about the threat intelligence related to a finding.
Type (string) --
The type of threat intelligence indicator.
Value (string) --
The value of a threat intelligence indicator.
Category (string) --
The category of a threat intelligence indicator.
LastObservedAt (string) --
The date and time when the most recent instance of a threat intelligence indicator was observed.
Source (string) --
The source of the threat intelligence indicator.
SourceUrl (string) --
The URL to the page or site where you can get more information about the threat intelligence indicator.
Resources (list) --
A set of resource data types that describe the resources that the finding refers to.
(dict) --
A resource related to a finding.
Type (string) --
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
Id (string) --
The canonical identifier for the given resource type.
Partition (string) --
The canonical AWS partition name that the Region is assigned to.
Region (string) --
The canonical AWS external Region name where this resource is located.
Tags (dict) --
A list of AWS tags associated with a resource at the time the finding was processed.
Details (dict) --
Additional details about the resource related to a finding.
AwsAutoScalingAutoScalingGroup (dict) --
Details for an autoscaling group.
LaunchConfigurationName (string) --
The name of the launch configuration.
LoadBalancerNames (list) --
The list of load balancers associated with the group.
HealthCheckType (string) --
The service to use for the health checks.
HealthCheckGracePeriod (integer) --
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
CreatedTime (string) --
The datetime when the auto scaling group was created.
AwsCodeBuildProject (dict) --
Details for an AWS CodeBuild project.
EncryptionKey (string) --
The AWS Key Management Service (AWS KMS) customer master key (CMK) used to encrypt the build output artifacts.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK alias (using the format alias/alias-name).
Environment (dict) --
Information about the build environment for this build project.
Certificate (string) --
The certificate to use with this build project.
ImagePullCredentialsType (string) --
The type of credentials AWS CodeBuild uses to pull images in your build.
Valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
RegistryCredential (dict) --
The credentials for access to a private registry.
Credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
CredentialProvider (string) --
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for AWS Secrets Manager.
Type (string) --
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
Name (string) --
The name of the build project.
Source (dict) --
Information about the build input source code for this build project.
Type (string) --
The type of repository that contains the source code to be built. Valid values are:
Location (string) --
Information about the location of the source code to be built.
Valid values include:
GitCloneDepth (integer) --
Information about the Git clone depth for the build project.
InsecureSsl (boolean) --
Whether to ignore SSL warnings while connecting to the project source code.
ServiceRole (string) --
The ARN of the IAM role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
VpcConfig (dict) --
Information about the VPC configuration that AWS CodeBuild accesses.
VpcId (string) --
The ID of the VPC.
Subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
SecurityGroupIds (list) --
A list of one or more security group IDs in your Amazon VPC.
AwsCloudFrontDistribution (dict) --
Details about a CloudFront distribution.
DomainName (string) --
The domain name corresponding to the distribution.
ETag (string) --
The entity tag is a hash of the object.
LastModifiedTime (string) --
The date and time that the distribution was last modified.
Logging (dict) --
A complex type that controls whether access logs are written for the distribution.
Bucket (string) --
The Amazon S3 bucket to store the access logs in.
Enabled (boolean) --
With this field, you can enable or disable the selected distribution.
IncludeCookies (boolean) --
Specifies whether you want CloudFront to include cookies in access logs.
Prefix (string) --
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
Origins (dict) --
A complex type that contains information about origins for this distribution.
Items (list) --
A complex type that contains origins or origin groups for this distribution.
(dict) --
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), Amazon Elemental MediaStore, or other server from which CloudFront gets your files.
DomainName (string) --
Amazon S3 origins: The DNS name of the Amazon S3 bucket from which you want CloudFront to get objects for this origin.
Id (string) --
A unique identifier for the origin or origin group.
OriginPath (string) --
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
Status (string) --
Indicates the current status of the distribution.
WebAclId (string) --
A unique identifier that specifies the AWS WAF web ACL, if any, to associate with this distribution.
AwsEc2Instance (dict) --
Details about an Amazon EC2 instance related to a finding.
Type (string) --
The instance type of the instance.
ImageId (string) --
The Amazon Machine Image (AMI) ID of the instance.
IpV4Addresses (list) --
The IPv4 addresses associated with the instance.
IpV6Addresses (list) --
The IPv6 addresses associated with the instance.
KeyName (string) --
The key name associated with the instance.
IamInstanceProfileArn (string) --
The IAM profile ARN of the instance.
VpcId (string) --
The identifier of the VPC that the instance was launched in.
SubnetId (string) --
The identifier of the subnet that the instance was launched in.
LaunchedAt (string) --
The date/time the instance was launched.
AwsEc2NetworkInterface (dict) --
Details for an Amazon EC2 network interface.
Attachment (dict) --
The network interface attachment.
AttachTime (string) --
The timestamp indicating when the attachment initiated.
AttachmentId (string) --
The identifier of the network interface attachment
DeleteOnTermination (boolean) --
Indicates whether the network interface is deleted when the instance is terminated.
DeviceIndex (integer) --
The device index of the network interface attachment on the instance.
InstanceId (string) --
The ID of the instance.
InstanceOwnerId (string) --
The AWS account ID of the owner of the instance.
Status (string) --
The attachment state.
Valid values: attaching | attached | detaching | detached
NetworkInterfaceId (string) --
The ID of the network interface.
SecurityGroups (list) --
Security groups for the network interface.
(dict) --
A security group associated with the network interface.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
SourceDestCheck (boolean) --
Indicates whether traffic to or from the instance is validated.
AwsEc2SecurityGroup (dict) --
Details for an EC2 security group.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
OwnerId (string) --
The AWS account ID of the owner of the security group.
VpcId (string) --
[VPC only] The ID of the VPC for the security group.
IpPermissions (list) --
The inbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and AWS account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
IpPermissionsEgress (list) --
[VPC only] The outbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and AWS account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
AwsEc2Volume (dict) --
Details for an EC2 volume.
CreateTime (string) --
The datetime when the volume was created.
Encrypted (boolean) --
Whether the volume is encrypted.
Size (integer) --
The size of the volume, in GiBs.
SnapshotId (string) --
The snapshot from which the volume was created.
Status (string) --
The volume state.
KmsKeyId (string) --
The ARN of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the volume.
Attachments (list) --
The volume attachments.
(dict) --
An attachment to an AWS EC2 volume.
AttachTime (string) --
The datetime when the attachment initiated.
DeleteOnTermination (boolean) --
Whether the EBS volume is deleted when the EC2 instance is terminated.
InstanceId (string) --
The identifier of the EC2 instance.
Status (string) --
The attachment state of the volume.
AwsEc2Vpc (dict) --
Details for an EC2 VPC.
CidrBlockAssociationSet (list) --
Information about the IPv4 CIDR blocks associated with the VPC.
(dict) --
An IPv4 CIDR block association.
AssociationId (string) --
The association ID for the IPv4 CIDR block.
CidrBlock (string) --
The IPv4 CIDR block.
CidrBlockState (string) --
Information about the state of the IPv4 CIDR block.
Ipv6CidrBlockAssociationSet (list) --
Information about the IPv6 CIDR blocks associated with the VPC.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
DhcpOptionsId (string) --
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
State (string) --
The current state of the VPC.
AwsElbv2LoadBalancer (dict) --
Details about a load balancer.
AvailabilityZones (list) --
The Availability Zones for the load balancer.
(dict) --
Information about an Availability Zone.
ZoneName (string) --
The name of the Availability Zone.
SubnetId (string) --
The ID of the subnet. You can specify one subnet per Availability Zone.
CanonicalHostedZoneId (string) --
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
CreatedTime (string) --
The date and time the load balancer was created.
DNSName (string) --
The public DNS name of the load balancer.
IpAddressType (string) --
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
Scheme (string) --
The nodes of an Internet-facing load balancer have public IP addresses.
SecurityGroups (list) --
The IDs of the security groups for the load balancer.
State (dict) --
The state of the load balancer.
Code (string) --
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
Reason (string) --
A description of the state.
Type (string) --
The type of load balancer.
VpcId (string) --
The ID of the VPC for the load balancer.
AwsElasticsearchDomain (dict) --
Details for an Elasticsearch domain.
AccessPolicies (string) --
IAM policy document specifying the access policies for the new Amazon ES domain.
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the Elasticsearch domain.
Valid values:
DomainId (string) --
Unique identifier for an Amazon ES domain.
DomainName (string) --
Name of an Amazon ES domain.
Domain names are unique across all domains owned by the same account within an AWS Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Endpoint (string) --
Domain-specific endpoint used to submit index, search, and data upload requests to an Amazon ES domain.
The endpoint is a service URL.
Endpoints (dict) --
The key-value pair that exists if the Amazon ES domain uses VPC endpoints.
ElasticsearchVersion (string) --
Elasticsearch version.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
VPCOptions (dict) --
Information that Amazon ES derives based on VPCOptions for the domain.
AvailabilityZones (list) --
The list of Availability Zones associated with the VPC subnets.
SecurityGroupIds (list) --
The list of security group IDs associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs associated with the VPC endpoints for the domain.
VPCId (string) --
ID for the VPC.
AwsS3Bucket (dict) --
Details about an Amazon S3 bucket related to a finding.
OwnerId (string) --
The canonical user ID of the owner of the S3 bucket.
OwnerName (string) --
The display name of the owner of the S3 bucket.
CreatedAt (string) --
The date and time when the S3 bucket was created.
ServerSideEncryptionConfiguration (dict) --
The encryption rules that are applied to the S3 bucket.
Rules (list) --
The encryption rules that are applied to the S3 bucket.
(dict) --
An encryption rule to apply to the S3 bucket.
ApplyServerSideEncryptionByDefault (dict) --
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
SSEAlgorithm (string) --
Server-side encryption algorithm to use for the default encryption.
KMSMasterKeyID (string) --
AWS KMS customer master key (CMK) ID to use for the default encryption.
AwsS3Object (dict) --
Details about an Amazon S3 object related to a finding.
LastModified (string) --
The date and time when the object was last modified.
ETag (string) --
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
VersionId (string) --
The version of the object.
ContentType (string) --
A standard MIME type describing the format of the object data.
ServerSideEncryption (string) --
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
SSEKMSKeyId (string) --
The identifier of the AWS Key Management Service (AWS KMS) symmetric customer managed customer master key (CMK) that was used for the object.
AwsIamAccessKey (dict) --
Details about an IAM access key related to a finding.
UserName (string) --
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
Status (string) --
The status of the IAM access key related to a finding.
CreatedAt (string) --
The creation date/time of the IAM access key related to a finding.
PrincipalId (string) --
The ID of the principal associated with an access key.
PrincipalType (string) --
The type of principal associated with an access key.
PrincipalName (string) --
The name of the principal.
AwsIamRole (dict) --
Details about an IAM role.
AssumeRolePolicyDocument (string) --
The trust policy that grants permission to assume the role.
CreateDate (string) --
The date and time, in ISO 8601 date-time format, when the role was created.
RoleId (string) --
The stable and unique string identifying the role.
RoleName (string) --
The friendly name that identifies the role.
MaxSessionDuration (integer) --
The maximum session duration (in seconds) that you want to set for the specified role.
Path (string) --
The path to the role.
AwsKmsKey (dict) --
Details about a KMS key.
AWSAccountId (string) --
The twelve-digit account ID of the AWS account that owns the CMK.
CreationDate (float) --
The date and time when the CMK was created.
KeyId (string) --
The globally unique identifier for the CMK.
KeyManager (string) --
The manager of the CMK. CMKs in your AWS account are either customer managed or AWS managed.
KeyState (string) --
The state of the CMK.
Origin (string) --
The source of the CMK's key material.
When this value is AWS_KMS , AWS KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the CMK lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the AWS CloudHSM cluster associated with a custom key store.
AwsLambdaFunction (dict) --
Details about a Lambda function.
Code (dict) --
An AwsLambdaFunctionCode object.
S3Bucket (string) --
An Amazon S3 bucket in the same AWS Region as your function. The bucket can be in a different AWS account.
S3Key (string) --
The Amazon S3 key of the deployment package.
S3ObjectVersion (string) --
For versioned objects, the version of the deployment package object to use.
ZipFile (string) --
The base64-encoded contents of the deployment package. AWS SDK and AWS CLI clients handle the encoding for you.
CodeSha256 (string) --
The SHA256 hash of the function's deployment package.
DeadLetterConfig (dict) --
The function's dead letter queue.
TargetArn (string) --
The Amazon Resource Name (ARN) of an Amazon SQS queue or Amazon SNS topic.
Environment (dict) --
The function's environment variables.
Variables (dict) --
Environment variable key-value pairs.
Error (dict) --
An AwsLambdaFunctionEnvironmentError object.
ErrorCode (string) --
The error code.
Message (string) --
The error message.
FunctionName (string) --
The name of the function.
Handler (string) --
The function that Lambda calls to begin executing your function.
KmsKeyArn (string) --
The KMS key that's used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed CMK.
LastModified (string) --
The date and time that the function was last updated, in ISO-8601 format (YYYY-MM-DDThh:mm:ss.sTZD).
Layers (list) --
The function's layers.
(dict) --
An AWS Lambda layer.
Arn (string) --
The Amazon Resource Name (ARN) of the function layer.
CodeSize (integer) --
The size of the layer archive in bytes.
MasterArn (string) --
For Lambda@Edge functions, the ARN of the master function.
MemorySize (integer) --
The memory that's allocated to the function.
RevisionId (string) --
The latest updated revision of the function or alias.
Role (string) --
The function's execution role.
Runtime (string) --
The runtime environment for the Lambda function.
Timeout (integer) --
The amount of time that Lambda allows a function to run before stopping it.
TracingConfig (dict) --
The function's AWS X-Ray tracing configuration.
Mode (string) --
The tracing mode.
VpcConfig (dict) --
The function's networking configuration.
SecurityGroupIds (list) --
A list of VPC security groups IDs.
SubnetIds (list) --
A list of VPC subnet IDs.
VpcId (string) --
The ID of the VPC.
Version (string) --
The version of the Lambda function.
AwsLambdaLayerVersion (dict) --
Details for a Lambda layer version.
Version (integer) --
The version number.
CompatibleRuntimes (list) --
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
CreatedDate (string) --
The date that the version was created, in ISO 8601 format. For example, 2018-11-27T15:10:45.123+0000.
AwsRdsDbInstance (dict) --
Details for an Amazon RDS database instance.
AssociatedRoles (list) --
The AWS Identity and Access Management (IAM) roles associated with the DB instance.
(dict) --
An AWS Identity and Access Management (IAM) role associated with the DB instance.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB instance.
FeatureName (string) --
The name of the feature associated with the IAM)role.
Status (string) --
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
CACertificateIdentifier (string) --
The identifier of the CA certificate for this DB instance.
DBClusterIdentifier (string) --
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
DBInstanceIdentifier (string) --
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
DBInstanceClass (string) --
Contains the name of the compute and memory capacity class of the DB instance.
DbInstancePort (integer) --
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
DbiResourceId (string) --
The AWS Region-unique, immutable identifier for the DB instance. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB instance is accessed.
DBName (string) --
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
DeletionProtection (boolean) --
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Endpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Engine (string) --
Provides the name of the database engine to use for this DB instance.
EngineVersion (string) --
Indicates the database engine version.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
InstanceCreateTime (string) --
Provides the date and time the DB instance was created.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB instance.
PubliclyAccessible (boolean) --
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
StorageEncrypted (boolean) --
Specifies whether the DB instance is encrypted.
TdeCredentialArn (string) --
The ARN from the key store with which the instance is associated for TDE encryption.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB instance belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
AwsSnsTopic (dict) --
Details about an SNS topic.
KmsMasterKeyId (string) --
The ID of an AWS managed customer master key (CMK) for Amazon SNS or a custom CMK.
Subscription (list) --
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
(dict) --
A wrapper type for the attributes of an Amazon SNS subscription.
Endpoint (string) --
The subscription's endpoint (format depends on the protocol).
Protocol (string) --
The subscription's protocol.
TopicName (string) --
The name of the topic.
Owner (string) --
The subscription's owner.
AwsSqsQueue (dict) --
Details about an SQS queue.
KmsDataKeyReusePeriodSeconds (integer) --
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again.
KmsMasterKeyId (string) --
The ID of an AWS managed customer master key (CMK) for Amazon SQS or a custom CMK.
QueueName (string) --
The name of the new queue.
DeadLetterTargetArn (string) --
The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
AwsWafWebAcl (dict) --
Details for a WAF WebACL.
Name (string) --
A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it.
DefaultAction (string) --
The action to perform if none of the rules contained in the WebACL match.
Rules (list) --
An array that contains the action for each rule in a WebACL, the priority of the rule, and the ID of the rule.
(dict) --
Details for a rule in a WAF WebACL.
Action (dict) --
Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the rule.
Type (string) --
Specifies how you want AWS WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
ExcludedRules (list) --
Rules to exclude from a rule group.
(dict) --
Details about a rule to exclude from a rule group.
RuleId (string) --
The unique identifier for the rule to exclude from the rule group.
OverrideAction (dict) --
Use the OverrideAction to test your RuleGroup.
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup, set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
Type (string) --
COUNT overrides the action specified by the individual rule within a RuleGroup .
If set to NONE , the rule's action takes place.
Priority (integer) --
Specifies the order in which the rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a WebACL, the values do not need to be consecutive.
RuleId (string) --
The identifier for a rule.
Type (string) --
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
WebAclId (string) --
A unique identifier for a WebACL.
Container (dict) --
Details about a container resource related to a finding.
Name (string) --
The name of the container related to a finding.
ImageId (string) --
The identifier of the image related to a finding.
ImageName (string) --
The name of the image related to a finding.
LaunchedAt (string) --
The date and time when the container started.
Other (dict) --
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
Compliance (dict) --
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS AWS Foundations. Contains security standard-related finding details.
Status (string) --
The result of a standards check.
The valid values for Status are as follows.
RelatedRequirements (list) --
For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
StatusReasons (list) --
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
(dict) --
Provides additional context for the value of Compliance.Status .
ReasonCode (string) --
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
Description (string) --
The corresponding description for the status reason code.
VerificationState (string) --
Indicates the veracity of a finding.
WorkflowState (string) --
The workflow state of a finding.
Workflow (dict) --
Provides information about the status of the investigation into a finding.
Status (string) --
The status of the investigation into the finding. The allowed values are the following.
RecordState (string) --
The record state of a finding.
RelatedFindings (list) --
A list of related findings.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Note (dict) --
A user-defined note added to a finding.
Text (string) --
The text of a note.
UpdatedBy (string) --
The principal that created a note.
UpdatedAt (string) --
The timestamp of when the note was updated.
Vulnerabilities (list) --
Provides a list of vulnerabilities associated with the findings.
(dict) --
A vulnerability associated with a finding.
Id (string) --
The identifier of the vulnerability.
VulnerablePackages (list) --
List of software packages that have the vulnerability.
(dict) --
Information about a software package.
Name (string) --
The name of the software package.
Version (string) --
The version of the software package.
Epoch (string) --
The epoch of the software package.
Release (string) --
The release of the software package.
Architecture (string) --
The architecture used for the software package.
Cvss (list) --
CVSS scores from the advisory related to the vulnerability.
(dict) --
CVSS scores from the advisory related to the vulnerability.
Version (string) --
The version of CVSS for the CVSS score.
BaseScore (float) --
The base CVSS score.
BaseVector (string) --
The base scoring vector for the CVSS score.
RelatedVulnerabilities (list) --
List of vulnerabilities that are related to this vulnerability.
Vendor (dict) --
Information about the vendor that generates the vulnerability report.
Name (string) --
The name of the vendor.
Url (string) --
The URL of the vulnerability advisory.
VendorSeverity (string) --
The severity that the vendor assigned to the vulnerability.
VendorCreatedAt (string) --
The datetime when the vulnerability advisory was created.
VendorUpdatedAt (string) --
The datetime when the vulnerability advisory was last updated.
ReferenceUrls (list) --
A list of URLs that provide additional information about the vulnerability.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Lists the results of the Security Hub insight specified by the insight ARN.
See also: AWS API Documentation
Request Syntax
response = client.get_insight_results(
InsightArn='string'
)
[REQUIRED]
The ARN of the insight for which to return results.
{
'InsightResults': {
'InsightArn': 'string',
'GroupByAttribute': 'string',
'ResultValues': [
{
'GroupByAttributeValue': 'string',
'Count': 123
},
]
}
}
Response Structure
The insight results returned by the operation.
The ARN of the insight whose results are returned by the GetInsightResults operation.
The attribute that the findings are grouped by for the insight whose results are returned by the GetInsightResults operation.
The list of insight result values returned by the GetInsightResults operation.
The insight result values returned by the GetInsightResults operation.
The value of the attribute that the findings are grouped by for the insight whose results are returned by the GetInsightResults operation.
The number of findings returned for each GroupByAttributeValue .
Exceptions
Lists and describes insights for the specified insight ARNs.
See also: AWS API Documentation
Request Syntax
response = client.get_insights(
InsightArns=[
'string',
],
NextToken='string',
MaxResults=123
)
The ARNs of the insights to describe. If you do not provide any insight ARNs, then GetInsights returns all of your custom insights. It does not return any managed insights.
The token that is required for pagination. On your first call to the GetInsights operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Insights': [
{
'InsightArn': 'string',
'Name': 'string',
'Filters': {
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
'GroupByAttribute': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Insights (list) --
The insights returned by the operation.
(dict) --
Contains information about a Security Hub insight.
InsightArn (string) --
The ARN of a Security Hub insight.
Name (string) --
The name of a Security Hub insight.
Filters (dict) --
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
ProductArn (list) --
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
AwsAccountId (list) --
The AWS account ID that a finding is generated in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Id (list) --
The security findings provider-specific identifier for a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
GeneratorId (list) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Type (list) --
A finding type in the format of namespace/category/classifier that classifies a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
FirstObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
LastObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
CreatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
UpdatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
SeverityProduct (list) --
The native severity as defined by the security-findings provider's solution that generated the finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityNormalized (list) --
The normalized severity of a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityLabel (list) --
The label of a finding's severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Confidence (list) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Criticality (list) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Title (list) --
A finding's title.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Description (list) --
A finding's description.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RecommendationText (list) --
The recommendation of what to do about the issue described in a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
SourceUrl (list) --
A URL that links to a page about the current finding in the security-findings provider's solution.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProductFields (list) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ProductName (list) --
The name of the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
CompanyName (list) --
The name of the findings provider (company) that owns the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
UserDefinedFields (list) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
MalwareName (list) --
The name of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwareType (list) --
The type of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwarePath (list) --
The filesystem path of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwareState (list) --
The state of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkDirection (list) --
Indicates the direction of network traffic associated with a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkProtocol (list) --
The protocol of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkSourceIpV4 (list) --
The source IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourceIpV6 (list) --
The source IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourcePort (list) --
The source port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkSourceDomain (list) --
The source domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkSourceMac (list) --
The source media access control (MAC) address of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkDestinationIpV4 (list) --
The destination IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationIpV6 (list) --
The destination IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationPort (list) --
The destination port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkDestinationDomain (list) --
The destination domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessName (list) --
The name of the process.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessPath (list) --
The path to the process executable.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessPid (list) --
The process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessParentPid (list) --
The parent process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessLaunchedAt (list) --
The date/time that the process was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ProcessTerminatedAt (list) --
The date/time that the process was terminated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorType (list) --
The type of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorValue (list) --
The value of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorCategory (list) --
The category of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorLastObservedAt (list) --
The date/time of the last observation of a threat intelligence indicator.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorSource (list) --
The source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorSourceUrl (list) --
The URL for more details from the source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceType (list) --
Specifies the type of the resource that details are provided for.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceId (list) --
The canonical identifier for the given resource type.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourcePartition (list) --
The canonical AWS partition name that the Region is assigned to.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceRegion (list) --
The canonical AWS external Region name where this resource is located.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceTags (list) --
A list of AWS tags associated with a resource at the time the finding was processed.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ResourceAwsEc2InstanceType (list) --
The instance type of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceImageId (list) --
The Amazon Machine Image (AMI) ID of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceIpV4Addresses (list) --
The IPv4 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceIpV6Addresses (list) --
The IPv6 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceKeyName (list) --
The key name associated with the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceIamInstanceProfileArn (list) --
The IAM profile ARN of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceVpcId (list) --
The identifier of the VPC that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceSubnetId (list) --
The identifier of the subnet that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceLaunchedAt (list) --
The date and time the instance was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsS3BucketOwnerId (list) --
The canonical user ID of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsS3BucketOwnerName (list) --
The display name of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyUserName (list) --
The user associated with the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyStatus (list) --
The status of the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyCreatedAt (list) --
The creation date/time of the IAM access key related to a finding.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceContainerName (list) --
The name of the container related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerImageId (list) --
The identifier of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerImageName (list) --
The name of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerLaunchedAt (list) --
The date/time that the container was started.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceDetailsOther (list) --
The details of a resource that doesn't have a specific subfield for the resource type defined.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ComplianceStatus (list) --
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
VerificationState (list) --
The veracity of a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
WorkflowState (list) --
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
WorkflowStatus (list) --
The status of the investigation into a finding. Allowed values are the following.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RecordState (list) --
The updated record state for the finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RelatedFindingsId (list) --
The solution-generated identifier for a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NoteText (list) --
The text of a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NoteUpdatedAt (list) --
The timestamp of when the note was updated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
NoteUpdatedBy (list) --
The principal that created a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Keyword (list) --
A keyword for a finding.
(dict) --
A keyword filter for querying findings.
Value (string) --
A value for the keyword.
GroupByAttribute (string) --
The grouping attribute for the insight's findings. Indicates how to group the matching findings, and identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
See also: AWS API Documentation
Request Syntax
response = client.get_invitations_count()
{
'InvitationsCount': 123
}
Response Structure
The number of all membership invitations sent to this Security Hub member account, not including the currently accepted invitation.
Exceptions
Provides the details for the Security Hub master account for the current member account.
See also: AWS API Documentation
Request Syntax
response = client.get_master_account()
{
'Master': {
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
}
}
Response Structure
A list of details about the Security Hub master account for the current member account.
The account ID of the Security Hub master account that the invitation was sent from.
The ID of the invitation sent to the member account.
The timestamp of when the invitation was sent.
The current status of the association between the member and master accounts.
Exceptions
Returns the details for the Security Hub member accounts for the specified account IDs.
See also: AWS API Documentation
Request Syntax
response = client.get_members(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs for the Security Hub member accounts to return the details for.
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of details about the Security Hub member accounts.
The details about a member account.
The AWS account ID of the member account.
The email address of the member account.
The AWS account ID of the Security Hub master account associated with this member account.
The status of the relationship between the member account and its master account.
A timestamp for the date and time when the invitation was sent to the member account.
The timestamp for the date and time when the member account was updated.
The list of AWS accounts that could not be processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Create a paginator for an operation.
Returns an object that can wait for some condition.
Invites other AWS accounts to become member accounts for the Security Hub master account that the invitation is sent from.
Before you can use this action to invite a member, you must first use the `` CreateMembers `` action to create the member account in Security Hub.
When the account owner accepts the invitation to become a member account and enables Security Hub, the master account can view the findings generated from the member account.
See also: AWS API Documentation
Request Syntax
response = client.invite_members(
AccountIds=[
'string',
]
)
The list of account IDs of the AWS accounts to invite to Security Hub as members.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of AWS accounts that could not be processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An AWS account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.list_enabled_products_for_import(
NextToken='string',
MaxResults=123
)
The token that is required for pagination. On your first call to the ListEnabledProductsForImport operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'ProductSubscriptions': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
ProductSubscriptions (list) --
The list of ARNs for the resources that represent your subscriptions to products.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Lists all Security Hub membership invitations that were sent to the current AWS account.
See also: AWS API Documentation
Request Syntax
response = client.list_invitations(
MaxResults=123,
NextToken='string'
)
The token that is required for pagination. On your first call to the ListInvitations operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Invitations': [
{
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Invitations (list) --
The details of the invitations returned by the operation.
(dict) --
Details about an invitation.
AccountId (string) --
The account ID of the Security Hub master account that the invitation was sent from.
InvitationId (string) --
The ID of the invitation sent to the member account.
InvitedAt (datetime) --
The timestamp of when the invitation was sent.
MemberStatus (string) --
The current status of the association between the member and master accounts.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Lists details about all member accounts for the current Security Hub master account.
See also: AWS API Documentation
Request Syntax
response = client.list_members(
OnlyAssociated=True|False,
MaxResults=123,
NextToken='string'
)
Specifies which member accounts to include in the response based on their relationship status with the master account. The default value is TRUE .
If OnlyAssociated is set to TRUE , the response includes member accounts whose relationship status with the master is set to ENABLED or DISABLED .
If OnlyAssociated is set to FALSE , the response includes all existing member accounts.
The token that is required for pagination. On your first call to the ListMembers operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Members (list) --
Member details returned by the operation.
(dict) --
The details about a member account.
AccountId (string) --
The AWS account ID of the member account.
Email (string) --
The email address of the member account.
MasterId (string) --
The AWS account ID of the Security Hub master account associated with this member account.
MemberStatus (string) --
The status of the relationship between the member account and its master account.
InvitedAt (datetime) --
A timestamp for the date and time when the invitation was sent to the member account.
UpdatedAt (datetime) --
The timestamp for the date and time when the member account was updated.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
Returns a list of tags associated with a resource.
See also: AWS API Documentation
Request Syntax
response = client.list_tags_for_resource(
ResourceArn='string'
)
[REQUIRED]
The ARN of the resource to retrieve tags for.
{
'Tags': {
'string': 'string'
}
}
Response Structure
The tags associated with a resource.
Exceptions
Adds one or more tags to a resource.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
ResourceArn='string',
Tags={
'string': 'string'
}
)
[REQUIRED]
The ARN of the resource to apply the tags to.
[REQUIRED]
The tags to add to the resource.
dict
Response Syntax
{}
Response Structure
Exceptions
Removes one or more tags from a resource.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
ResourceArn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The ARN of the resource to remove the tags from.
[REQUIRED]
The tag keys associated with the tags to remove from the resource.
dict
Response Syntax
{}
Response Structure
Exceptions
Updates the name and description of a custom action target in Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.update_action_target(
ActionTargetArn='string',
Name='string',
Description='string'
)
[REQUIRED]
The ARN of the custom action target to update.
dict
Response Syntax
{}
Response Structure
Exceptions
UpdateFindings is deprecated. Instead of UpdateFindings , use BatchUpdateFindings .
Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
See also: AWS API Documentation
Request Syntax
response = client.update_findings(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
Note={
'Text': 'string',
'UpdatedBy': 'string'
},
RecordState='ACTIVE'|'ARCHIVED'
)
[REQUIRED]
A collection of attributes that specify which findings you want to update.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The AWS account ID that a finding is generated in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's description.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The type of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The state of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Indicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the process.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The path to the process executable.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Specifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS external Region name where this resource is located.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of AWS tags associated with a resource at the time the finding was processed.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The instance type of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of the container related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The veracity of a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the investigation into a finding. Allowed values are the following.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The updated record state for the finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The text of a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The updated note for the finding.
The updated note text.
The principal that updated the note.
dict
Response Syntax
{}
Response Structure
Exceptions
Updates the Security Hub insight identified by the specified insight ARN.
See also: AWS API Documentation
Request Syntax
response = client.update_insight(
InsightArn='string',
Name='string',
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
GroupByAttribute='string'
)
[REQUIRED]
The ARN of the insight that you want to update.
The updated filters that define this insight.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The AWS account ID that a finding is generated in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's description.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The type of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The state of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Indicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the process.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The path to the process executable.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Specifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS external Region name where this resource is located.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of AWS tags associated with a resource at the time the finding was processed.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The instance type of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of the container related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The veracity of a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the investigation into a finding. Allowed values are the following.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The updated record state for the finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The text of a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
dict
Response Syntax
{}
Response Structure
Exceptions
Updates configuration options for Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.update_security_hub_configuration(
AutoEnableControls=True|False
)
Whether to automatically enable new controls when they are added to standards that are enabled.
By default, this is set to true , and new controls are enabled automatically. To not automatically enable new controls, set this to false .
{}
Response Structure
Exceptions
Used to control whether an individual security standard control is enabled or disabled.
See also: AWS API Documentation
Request Syntax
response = client.update_standards_control(
StandardsControlArn='string',
ControlStatus='ENABLED'|'DISABLED',
DisabledReason='string'
)
[REQUIRED]
The ARN of the security standard control to enable or disable.
dict
Response Syntax
{}
Response Structure
Exceptions
The available paginators are:
paginator = client.get_paginator('get_enabled_standards')
Creates an iterator that will paginate through responses from SecurityHub.Client.get_enabled_standards().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StandardsSubscriptionArns=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The list of the standards subscription ARNs for the standards to retrieve.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE'
},
],
}
Response Structure
(dict) --
StandardsSubscriptions (list) --
The list of StandardsSubscriptions objects that include information about the enabled standards.
(dict) --
A resource that represents your subscription to a supported standard.
StandardsSubscriptionArn (string) --
The ARN of a resource that represents your subscription to a supported standard.
StandardsArn (string) --
The ARN of a standard.
StandardsInput (dict) --
A key-value pair of input for the standard.
StandardsStatus (string) --
The status of the standards subscription.
paginator = client.get_paginator('get_findings')
Creates an iterator that will paginate through responses from SecurityHub.Client.get_findings().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
SortCriteria=[
{
'Field': 'string',
'SortOrder': 'asc'|'desc'
},
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The finding attributes used to define a condition to filter the returned findings.
Note that in the available filter fields, WorkflowState is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The AWS account ID that a finding is generated in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A finding's description.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The type of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The state of the malware that was observed.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Indicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the process.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The path to the process executable.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
Specifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The canonical AWS external Region name where this resource is located.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A list of AWS tags associated with a resource at the time the finding was processed.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
The instance type of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of the container related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The identifier of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The name of the image related to a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
The map filter for querying findings.
The key of the map filter.
The value for the key in the map filter.
The condition to apply to a key value when querying for findings with a map filter.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The veracity of a finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The status of the investigation into a finding. Allowed values are the following.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The updated record state for the finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The text of a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
The timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value.
The condition to be applied to a string value when querying for findings.
A keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding attributes used to sort the list of returned findings.
A collection of finding attributes used to sort findings.
The finding attribute used to sort findings.
The order used to sort findings.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Findings': [
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'Tags': {
'string': 'string'
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string'
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Environment': {
'Certificate': 'string',
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
}
},
'AwsCloudFrontDistribution': {
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string'
},
]
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string'
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
]
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
}
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'RoleId': 'string',
'RoleName': 'string',
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string'
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
]
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'Container': {
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string'
},
'Other': {
'string': 'string'
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string'
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
]
},
],
}
Response Structure
(dict) --
Findings (list) --
The findings that matched the filters specified in the request.
(dict) --
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between AWS security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by AWS services (Amazon GuardDuty, Amazon Inspector, and Amazon Macie) or by the integrated third-party solutions and standards checks.
SchemaVersion (string) --
The schema version that a finding is formatted for.
Id (string) --
The security findings provider-specific identifier for a finding.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
GeneratorId (string) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
AwsAccountId (string) --
The AWS account ID that a finding is generated in.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
FirstObservedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
LastObservedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
CreatedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider created the potential security issue that a finding captured.
UpdatedAt (string) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
Severity (dict) --
A finding's severity.
Product (float) --
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the AWS service or integrated partner product that generated the finding.
Label (string) --
The severity value of the finding. The allowed values are the following.
If you provide Normalized and do not provide Label , then Label is set automatically as follows.
Normalized (integer) --
Deprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
Original (string) --
The native severity from the finding product that generated the finding.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
Title (string) --
A finding's title.
Note
In this release, Title is a required property.
Description (string) --
A finding's description.
Note
In this release, Description is a required property.
Remediation (dict) --
A data type that describes the remediation options for a finding.
Recommendation (dict) --
A recommendation on the steps to take to remediate the issue identified by a finding.
Text (string) --
Describes the recommended steps to take to remediate an issue identified in a finding.
Url (string) --
A URL to a page or site that contains information about how to remediate a finding.
SourceUrl (string) --
A URL that links to a page about the current finding in the security-findings provider's solution.
ProductFields (dict) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
UserDefinedFields (dict) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Malware (list) --
A list of malware related to a finding.
(dict) --
A list of malware related to a finding.
Name (string) --
The name of the malware that was observed.
Type (string) --
The type of the malware that was observed.
Path (string) --
The file system path of the malware that was observed.
State (string) --
The state of the malware that was observed.
Network (dict) --
The details of network-related information about a finding.
Direction (string) --
The direction of network traffic associated with a finding.
Protocol (string) --
The protocol of network-related information about a finding.
OpenPortRange (dict) --
The range of open ports that is present on the network.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
SourceIpV4 (string) --
The source IPv4 address of network-related information about a finding.
SourceIpV6 (string) --
The source IPv6 address of network-related information about a finding.
SourcePort (integer) --
The source port of network-related information about a finding.
SourceDomain (string) --
The source domain of network-related information about a finding.
SourceMac (string) --
The source media access control (MAC) address of network-related information about a finding.
DestinationIpV4 (string) --
The destination IPv4 address of network-related information about a finding.
DestinationIpV6 (string) --
The destination IPv6 address of network-related information about a finding.
DestinationPort (integer) --
The destination port of network-related information about a finding.
DestinationDomain (string) --
The destination domain of network-related information about a finding.
NetworkPath (list) --
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
(dict) --
Information about a network path component.
ComponentId (string) --
The identifier of a component in the network path.
ComponentType (string) --
The type of component.
Egress (dict) --
Information about the component that comes after the current component in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Ingress (dict) --
Information about the component that comes before the current node in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Process (dict) --
The details of process-related information about a finding.
Name (string) --
The name of the process.
Path (string) --
The path to the process executable.
Pid (integer) --
The process ID.
ParentPid (integer) --
The parent process ID.
LaunchedAt (string) --
The date/time that the process was launched.
TerminatedAt (string) --
The date and time when the process was terminated.
ThreatIntelIndicators (list) --
Threat intelligence details related to a finding.
(dict) --
Details about the threat intelligence related to a finding.
Type (string) --
The type of threat intelligence indicator.
Value (string) --
The value of a threat intelligence indicator.
Category (string) --
The category of a threat intelligence indicator.
LastObservedAt (string) --
The date and time when the most recent instance of a threat intelligence indicator was observed.
Source (string) --
The source of the threat intelligence indicator.
SourceUrl (string) --
The URL to the page or site where you can get more information about the threat intelligence indicator.
Resources (list) --
A set of resource data types that describe the resources that the finding refers to.
(dict) --
A resource related to a finding.
Type (string) --
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
Id (string) --
The canonical identifier for the given resource type.
Partition (string) --
The canonical AWS partition name that the Region is assigned to.
Region (string) --
The canonical AWS external Region name where this resource is located.
Tags (dict) --
A list of AWS tags associated with a resource at the time the finding was processed.
Details (dict) --
Additional details about the resource related to a finding.
AwsAutoScalingAutoScalingGroup (dict) --
Details for an autoscaling group.
LaunchConfigurationName (string) --
The name of the launch configuration.
LoadBalancerNames (list) --
The list of load balancers associated with the group.
HealthCheckType (string) --
The service to use for the health checks.
HealthCheckGracePeriod (integer) --
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
CreatedTime (string) --
The datetime when the auto scaling group was created.
AwsCodeBuildProject (dict) --
Details for an AWS CodeBuild project.
EncryptionKey (string) --
The AWS Key Management Service (AWS KMS) customer master key (CMK) used to encrypt the build output artifacts.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK alias (using the format alias/alias-name).
Environment (dict) --
Information about the build environment for this build project.
Certificate (string) --
The certificate to use with this build project.
ImagePullCredentialsType (string) --
The type of credentials AWS CodeBuild uses to pull images in your build.
Valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
RegistryCredential (dict) --
The credentials for access to a private registry.
Credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
CredentialProvider (string) --
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for AWS Secrets Manager.
Type (string) --
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
Name (string) --
The name of the build project.
Source (dict) --
Information about the build input source code for this build project.
Type (string) --
The type of repository that contains the source code to be built. Valid values are:
Location (string) --
Information about the location of the source code to be built.
Valid values include:
GitCloneDepth (integer) --
Information about the Git clone depth for the build project.
InsecureSsl (boolean) --
Whether to ignore SSL warnings while connecting to the project source code.
ServiceRole (string) --
The ARN of the IAM role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
VpcConfig (dict) --
Information about the VPC configuration that AWS CodeBuild accesses.
VpcId (string) --
The ID of the VPC.
Subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
SecurityGroupIds (list) --
A list of one or more security group IDs in your Amazon VPC.
AwsCloudFrontDistribution (dict) --
Details about a CloudFront distribution.
DomainName (string) --
The domain name corresponding to the distribution.
ETag (string) --
The entity tag is a hash of the object.
LastModifiedTime (string) --
The date and time that the distribution was last modified.
Logging (dict) --
A complex type that controls whether access logs are written for the distribution.
Bucket (string) --
The Amazon S3 bucket to store the access logs in.
Enabled (boolean) --
With this field, you can enable or disable the selected distribution.
IncludeCookies (boolean) --
Specifies whether you want CloudFront to include cookies in access logs.
Prefix (string) --
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
Origins (dict) --
A complex type that contains information about origins for this distribution.
Items (list) --
A complex type that contains origins or origin groups for this distribution.
(dict) --
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), Amazon Elemental MediaStore, or other server from which CloudFront gets your files.
DomainName (string) --
Amazon S3 origins: The DNS name of the Amazon S3 bucket from which you want CloudFront to get objects for this origin.
Id (string) --
A unique identifier for the origin or origin group.
OriginPath (string) --
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
Status (string) --
Indicates the current status of the distribution.
WebAclId (string) --
A unique identifier that specifies the AWS WAF web ACL, if any, to associate with this distribution.
AwsEc2Instance (dict) --
Details about an Amazon EC2 instance related to a finding.
Type (string) --
The instance type of the instance.
ImageId (string) --
The Amazon Machine Image (AMI) ID of the instance.
IpV4Addresses (list) --
The IPv4 addresses associated with the instance.
IpV6Addresses (list) --
The IPv6 addresses associated with the instance.
KeyName (string) --
The key name associated with the instance.
IamInstanceProfileArn (string) --
The IAM profile ARN of the instance.
VpcId (string) --
The identifier of the VPC that the instance was launched in.
SubnetId (string) --
The identifier of the subnet that the instance was launched in.
LaunchedAt (string) --
The date/time the instance was launched.
AwsEc2NetworkInterface (dict) --
Details for an Amazon EC2 network interface.
Attachment (dict) --
The network interface attachment.
AttachTime (string) --
The timestamp indicating when the attachment initiated.
AttachmentId (string) --
The identifier of the network interface attachment
DeleteOnTermination (boolean) --
Indicates whether the network interface is deleted when the instance is terminated.
DeviceIndex (integer) --
The device index of the network interface attachment on the instance.
InstanceId (string) --
The ID of the instance.
InstanceOwnerId (string) --
The AWS account ID of the owner of the instance.
Status (string) --
The attachment state.
Valid values: attaching | attached | detaching | detached
NetworkInterfaceId (string) --
The ID of the network interface.
SecurityGroups (list) --
Security groups for the network interface.
(dict) --
A security group associated with the network interface.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
SourceDestCheck (boolean) --
Indicates whether traffic to or from the instance is validated.
AwsEc2SecurityGroup (dict) --
Details for an EC2 security group.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
OwnerId (string) --
The AWS account ID of the owner of the security group.
VpcId (string) --
[VPC only] The ID of the VPC for the security group.
IpPermissions (list) --
The inbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and AWS account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
IpPermissionsEgress (list) --
[VPC only] The outbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and AWS account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an AWS account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another AWS.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an AWS service. With outbound rules, this is the AWS service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
AwsEc2Volume (dict) --
Details for an EC2 volume.
CreateTime (string) --
The datetime when the volume was created.
Encrypted (boolean) --
Whether the volume is encrypted.
Size (integer) --
The size of the volume, in GiBs.
SnapshotId (string) --
The snapshot from which the volume was created.
Status (string) --
The volume state.
KmsKeyId (string) --
The ARN of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the volume.
Attachments (list) --
The volume attachments.
(dict) --
An attachment to an AWS EC2 volume.
AttachTime (string) --
The datetime when the attachment initiated.
DeleteOnTermination (boolean) --
Whether the EBS volume is deleted when the EC2 instance is terminated.
InstanceId (string) --
The identifier of the EC2 instance.
Status (string) --
The attachment state of the volume.
AwsEc2Vpc (dict) --
Details for an EC2 VPC.
CidrBlockAssociationSet (list) --
Information about the IPv4 CIDR blocks associated with the VPC.
(dict) --
An IPv4 CIDR block association.
AssociationId (string) --
The association ID for the IPv4 CIDR block.
CidrBlock (string) --
The IPv4 CIDR block.
CidrBlockState (string) --
Information about the state of the IPv4 CIDR block.
Ipv6CidrBlockAssociationSet (list) --
Information about the IPv6 CIDR blocks associated with the VPC.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
DhcpOptionsId (string) --
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
State (string) --
The current state of the VPC.
AwsElbv2LoadBalancer (dict) --
Details about a load balancer.
AvailabilityZones (list) --
The Availability Zones for the load balancer.
(dict) --
Information about an Availability Zone.
ZoneName (string) --
The name of the Availability Zone.
SubnetId (string) --
The ID of the subnet. You can specify one subnet per Availability Zone.
CanonicalHostedZoneId (string) --
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
CreatedTime (string) --
The date and time the load balancer was created.
DNSName (string) --
The public DNS name of the load balancer.
IpAddressType (string) --
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
Scheme (string) --
The nodes of an Internet-facing load balancer have public IP addresses.
SecurityGroups (list) --
The IDs of the security groups for the load balancer.
State (dict) --
The state of the load balancer.
Code (string) --
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
Reason (string) --
A description of the state.
Type (string) --
The type of load balancer.
VpcId (string) --
The ID of the VPC for the load balancer.
AwsElasticsearchDomain (dict) --
Details for an Elasticsearch domain.
AccessPolicies (string) --
IAM policy document specifying the access policies for the new Amazon ES domain.
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the Elasticsearch domain.
Valid values:
DomainId (string) --
Unique identifier for an Amazon ES domain.
DomainName (string) --
Name of an Amazon ES domain.
Domain names are unique across all domains owned by the same account within an AWS Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Endpoint (string) --
Domain-specific endpoint used to submit index, search, and data upload requests to an Amazon ES domain.
The endpoint is a service URL.
Endpoints (dict) --
The key-value pair that exists if the Amazon ES domain uses VPC endpoints.
ElasticsearchVersion (string) --
Elasticsearch version.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
VPCOptions (dict) --
Information that Amazon ES derives based on VPCOptions for the domain.
AvailabilityZones (list) --
The list of Availability Zones associated with the VPC subnets.
SecurityGroupIds (list) --
The list of security group IDs associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs associated with the VPC endpoints for the domain.
VPCId (string) --
ID for the VPC.
AwsS3Bucket (dict) --
Details about an Amazon S3 bucket related to a finding.
OwnerId (string) --
The canonical user ID of the owner of the S3 bucket.
OwnerName (string) --
The display name of the owner of the S3 bucket.
CreatedAt (string) --
The date and time when the S3 bucket was created.
ServerSideEncryptionConfiguration (dict) --
The encryption rules that are applied to the S3 bucket.
Rules (list) --
The encryption rules that are applied to the S3 bucket.
(dict) --
An encryption rule to apply to the S3 bucket.
ApplyServerSideEncryptionByDefault (dict) --
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
SSEAlgorithm (string) --
Server-side encryption algorithm to use for the default encryption.
KMSMasterKeyID (string) --
AWS KMS customer master key (CMK) ID to use for the default encryption.
AwsS3Object (dict) --
Details about an Amazon S3 object related to a finding.
LastModified (string) --
The date and time when the object was last modified.
ETag (string) --
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
VersionId (string) --
The version of the object.
ContentType (string) --
A standard MIME type describing the format of the object data.
ServerSideEncryption (string) --
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
SSEKMSKeyId (string) --
The identifier of the AWS Key Management Service (AWS KMS) symmetric customer managed customer master key (CMK) that was used for the object.
AwsIamAccessKey (dict) --
Details about an IAM access key related to a finding.
UserName (string) --
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
Status (string) --
The status of the IAM access key related to a finding.
CreatedAt (string) --
The creation date/time of the IAM access key related to a finding.
PrincipalId (string) --
The ID of the principal associated with an access key.
PrincipalType (string) --
The type of principal associated with an access key.
PrincipalName (string) --
The name of the principal.
AwsIamRole (dict) --
Details about an IAM role.
AssumeRolePolicyDocument (string) --
The trust policy that grants permission to assume the role.
CreateDate (string) --
The date and time, in ISO 8601 date-time format, when the role was created.
RoleId (string) --
The stable and unique string identifying the role.
RoleName (string) --
The friendly name that identifies the role.
MaxSessionDuration (integer) --
The maximum session duration (in seconds) that you want to set for the specified role.
Path (string) --
The path to the role.
AwsKmsKey (dict) --
Details about a KMS key.
AWSAccountId (string) --
The twelve-digit account ID of the AWS account that owns the CMK.
CreationDate (float) --
The date and time when the CMK was created.
KeyId (string) --
The globally unique identifier for the CMK.
KeyManager (string) --
The manager of the CMK. CMKs in your AWS account are either customer managed or AWS managed.
KeyState (string) --
The state of the CMK.
Origin (string) --
The source of the CMK's key material.
When this value is AWS_KMS , AWS KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the CMK lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the AWS CloudHSM cluster associated with a custom key store.
AwsLambdaFunction (dict) --
Details about a Lambda function.
Code (dict) --
An AwsLambdaFunctionCode object.
S3Bucket (string) --
An Amazon S3 bucket in the same AWS Region as your function. The bucket can be in a different AWS account.
S3Key (string) --
The Amazon S3 key of the deployment package.
S3ObjectVersion (string) --
For versioned objects, the version of the deployment package object to use.
ZipFile (string) --
The base64-encoded contents of the deployment package. AWS SDK and AWS CLI clients handle the encoding for you.
CodeSha256 (string) --
The SHA256 hash of the function's deployment package.
DeadLetterConfig (dict) --
The function's dead letter queue.
TargetArn (string) --
The Amazon Resource Name (ARN) of an Amazon SQS queue or Amazon SNS topic.
Environment (dict) --
The function's environment variables.
Variables (dict) --
Environment variable key-value pairs.
Error (dict) --
An AwsLambdaFunctionEnvironmentError object.
ErrorCode (string) --
The error code.
Message (string) --
The error message.
FunctionName (string) --
The name of the function.
Handler (string) --
The function that Lambda calls to begin executing your function.
KmsKeyArn (string) --
The KMS key that's used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed CMK.
LastModified (string) --
The date and time that the function was last updated, in ISO-8601 format (YYYY-MM-DDThh:mm:ss.sTZD).
Layers (list) --
The function's layers.
(dict) --
An AWS Lambda layer.
Arn (string) --
The Amazon Resource Name (ARN) of the function layer.
CodeSize (integer) --
The size of the layer archive in bytes.
MasterArn (string) --
For Lambda@Edge functions, the ARN of the master function.
MemorySize (integer) --
The memory that's allocated to the function.
RevisionId (string) --
The latest updated revision of the function or alias.
Role (string) --
The function's execution role.
Runtime (string) --
The runtime environment for the Lambda function.
Timeout (integer) --
The amount of time that Lambda allows a function to run before stopping it.
TracingConfig (dict) --
The function's AWS X-Ray tracing configuration.
Mode (string) --
The tracing mode.
VpcConfig (dict) --
The function's networking configuration.
SecurityGroupIds (list) --
A list of VPC security groups IDs.
SubnetIds (list) --
A list of VPC subnet IDs.
VpcId (string) --
The ID of the VPC.
Version (string) --
The version of the Lambda function.
AwsLambdaLayerVersion (dict) --
Details for a Lambda layer version.
Version (integer) --
The version number.
CompatibleRuntimes (list) --
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
CreatedDate (string) --
The date that the version was created, in ISO 8601 format. For example, 2018-11-27T15:10:45.123+0000.
AwsRdsDbInstance (dict) --
Details for an Amazon RDS database instance.
AssociatedRoles (list) --
The AWS Identity and Access Management (IAM) roles associated with the DB instance.
(dict) --
An AWS Identity and Access Management (IAM) role associated with the DB instance.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB instance.
FeatureName (string) --
The name of the feature associated with the IAM)role.
Status (string) --
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
CACertificateIdentifier (string) --
The identifier of the CA certificate for this DB instance.
DBClusterIdentifier (string) --
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
DBInstanceIdentifier (string) --
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
DBInstanceClass (string) --
Contains the name of the compute and memory capacity class of the DB instance.
DbInstancePort (integer) --
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
DbiResourceId (string) --
The AWS Region-unique, immutable identifier for the DB instance. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB instance is accessed.
DBName (string) --
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
DeletionProtection (boolean) --
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Endpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Engine (string) --
Provides the name of the database engine to use for this DB instance.
EngineVersion (string) --
Indicates the database engine version.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
InstanceCreateTime (string) --
Provides the date and time the DB instance was created.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB instance.
PubliclyAccessible (boolean) --
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
StorageEncrypted (boolean) --
Specifies whether the DB instance is encrypted.
TdeCredentialArn (string) --
The ARN from the key store with which the instance is associated for TDE encryption.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB instance belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
AwsSnsTopic (dict) --
Details about an SNS topic.
KmsMasterKeyId (string) --
The ID of an AWS managed customer master key (CMK) for Amazon SNS or a custom CMK.
Subscription (list) --
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
(dict) --
A wrapper type for the attributes of an Amazon SNS subscription.
Endpoint (string) --
The subscription's endpoint (format depends on the protocol).
Protocol (string) --
The subscription's protocol.
TopicName (string) --
The name of the topic.
Owner (string) --
The subscription's owner.
AwsSqsQueue (dict) --
Details about an SQS queue.
KmsDataKeyReusePeriodSeconds (integer) --
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again.
KmsMasterKeyId (string) --
The ID of an AWS managed customer master key (CMK) for Amazon SQS or a custom CMK.
QueueName (string) --
The name of the new queue.
DeadLetterTargetArn (string) --
The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
AwsWafWebAcl (dict) --
Details for a WAF WebACL.
Name (string) --
A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it.
DefaultAction (string) --
The action to perform if none of the rules contained in the WebACL match.
Rules (list) --
An array that contains the action for each rule in a WebACL, the priority of the rule, and the ID of the rule.
(dict) --
Details for a rule in a WAF WebACL.
Action (dict) --
Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the rule.
Type (string) --
Specifies how you want AWS WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
ExcludedRules (list) --
Rules to exclude from a rule group.
(dict) --
Details about a rule to exclude from a rule group.
RuleId (string) --
The unique identifier for the rule to exclude from the rule group.
OverrideAction (dict) --
Use the OverrideAction to test your RuleGroup.
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup, set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
Type (string) --
COUNT overrides the action specified by the individual rule within a RuleGroup .
If set to NONE , the rule's action takes place.
Priority (integer) --
Specifies the order in which the rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a WebACL, the values do not need to be consecutive.
RuleId (string) --
The identifier for a rule.
Type (string) --
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
WebAclId (string) --
A unique identifier for a WebACL.
Container (dict) --
Details about a container resource related to a finding.
Name (string) --
The name of the container related to a finding.
ImageId (string) --
The identifier of the image related to a finding.
ImageName (string) --
The name of the image related to a finding.
LaunchedAt (string) --
The date and time when the container started.
Other (dict) --
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
Compliance (dict) --
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS AWS Foundations. Contains security standard-related finding details.
Status (string) --
The result of a standards check.
The valid values for Status are as follows.
RelatedRequirements (list) --
For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
StatusReasons (list) --
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
(dict) --
Provides additional context for the value of Compliance.Status .
ReasonCode (string) --
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the AWS Security Hub User Guide .
Description (string) --
The corresponding description for the status reason code.
VerificationState (string) --
Indicates the veracity of a finding.
WorkflowState (string) --
The workflow state of a finding.
Workflow (dict) --
Provides information about the status of the investigation into a finding.
Status (string) --
The status of the investigation into the finding. The allowed values are the following.
RecordState (string) --
The record state of a finding.
RelatedFindings (list) --
A list of related findings.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Note (dict) --
A user-defined note added to a finding.
Text (string) --
The text of a note.
UpdatedBy (string) --
The principal that created a note.
UpdatedAt (string) --
The timestamp of when the note was updated.
Vulnerabilities (list) --
Provides a list of vulnerabilities associated with the findings.
(dict) --
A vulnerability associated with a finding.
Id (string) --
The identifier of the vulnerability.
VulnerablePackages (list) --
List of software packages that have the vulnerability.
(dict) --
Information about a software package.
Name (string) --
The name of the software package.
Version (string) --
The version of the software package.
Epoch (string) --
The epoch of the software package.
Release (string) --
The release of the software package.
Architecture (string) --
The architecture used for the software package.
Cvss (list) --
CVSS scores from the advisory related to the vulnerability.
(dict) --
CVSS scores from the advisory related to the vulnerability.
Version (string) --
The version of CVSS for the CVSS score.
BaseScore (float) --
The base CVSS score.
BaseVector (string) --
The base scoring vector for the CVSS score.
RelatedVulnerabilities (list) --
List of vulnerabilities that are related to this vulnerability.
Vendor (dict) --
Information about the vendor that generates the vulnerability report.
Name (string) --
The name of the vendor.
Url (string) --
The URL of the vulnerability advisory.
VendorSeverity (string) --
The severity that the vendor assigned to the vulnerability.
VendorCreatedAt (string) --
The datetime when the vulnerability advisory was created.
VendorUpdatedAt (string) --
The datetime when the vulnerability advisory was last updated.
ReferenceUrls (list) --
A list of URLs that provide additional information about the vulnerability.
paginator = client.get_paginator('get_insights')
Creates an iterator that will paginate through responses from SecurityHub.Client.get_insights().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
InsightArns=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The ARNs of the insights to describe. If you do not provide any insight ARNs, then GetInsights returns all of your custom insights. It does not return any managed insights.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Insights': [
{
'InsightArn': 'string',
'Name': 'string',
'Filters': {
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'
},
],
'Keyword': [
{
'Value': 'string'
},
]
},
'GroupByAttribute': 'string'
},
],
}
Response Structure
(dict) --
Insights (list) --
The insights returned by the operation.
(dict) --
Contains information about a Security Hub insight.
InsightArn (string) --
The ARN of a Security Hub insight.
Name (string) --
The name of a Security Hub insight.
Filters (dict) --
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
ProductArn (list) --
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
AwsAccountId (list) --
The AWS account ID that a finding is generated in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Id (list) --
The security findings provider-specific identifier for a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
GeneratorId (list) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Type (list) --
A finding type in the format of namespace/category/classifier that classifies a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
FirstObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
LastObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
CreatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
UpdatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
SeverityProduct (list) --
The native severity as defined by the security-findings provider's solution that generated the finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityNormalized (list) --
The normalized severity of a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityLabel (list) --
The label of a finding's severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Confidence (list) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Criticality (list) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Title (list) --
A finding's title.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Description (list) --
A finding's description.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RecommendationText (list) --
The recommendation of what to do about the issue described in a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
SourceUrl (list) --
A URL that links to a page about the current finding in the security-findings provider's solution.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProductFields (list) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ProductName (list) --
The name of the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
CompanyName (list) --
The name of the findings provider (company) that owns the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
UserDefinedFields (list) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
MalwareName (list) --
The name of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwareType (list) --
The type of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwarePath (list) --
The filesystem path of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
MalwareState (list) --
The state of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkDirection (list) --
Indicates the direction of network traffic associated with a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkProtocol (list) --
The protocol of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkSourceIpV4 (list) --
The source IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourceIpV6 (list) --
The source IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourcePort (list) --
The source port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkSourceDomain (list) --
The source domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkSourceMac (list) --
The source media access control (MAC) address of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NetworkDestinationIpV4 (list) --
The destination IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationIpV6 (list) --
The destination IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationPort (list) --
The destination port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkDestinationDomain (list) --
The destination domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessName (list) --
The name of the process.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessPath (list) --
The path to the process executable.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ProcessPid (list) --
The process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessParentPid (list) --
The parent process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessLaunchedAt (list) --
The date/time that the process was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ProcessTerminatedAt (list) --
The date/time that the process was terminated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorType (list) --
The type of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorValue (list) --
The value of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorCategory (list) --
The category of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorLastObservedAt (list) --
The date/time of the last observation of a threat intelligence indicator.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorSource (list) --
The source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ThreatIntelIndicatorSourceUrl (list) --
The URL for more details from the source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceType (list) --
Specifies the type of the resource that details are provided for.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceId (list) --
The canonical identifier for the given resource type.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourcePartition (list) --
The canonical AWS partition name that the Region is assigned to.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceRegion (list) --
The canonical AWS external Region name where this resource is located.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceTags (list) --
A list of AWS tags associated with a resource at the time the finding was processed.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ResourceAwsEc2InstanceType (list) --
The instance type of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceImageId (list) --
The Amazon Machine Image (AMI) ID of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceIpV4Addresses (list) --
The IPv4 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceIpV6Addresses (list) --
The IPv6 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceKeyName (list) --
The key name associated with the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceIamInstanceProfileArn (list) --
The IAM profile ARN of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceVpcId (list) --
The identifier of the VPC that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceSubnetId (list) --
The identifier of the subnet that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsEc2InstanceLaunchedAt (list) --
The date and time the instance was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsS3BucketOwnerId (list) --
The canonical user ID of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsS3BucketOwnerName (list) --
The display name of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyUserName (list) --
The user associated with the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyStatus (list) --
The status of the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceAwsIamAccessKeyCreatedAt (list) --
The creation date/time of the IAM access key related to a finding.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceContainerName (list) --
The name of the container related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerImageId (list) --
The identifier of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerImageName (list) --
The name of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
ResourceContainerLaunchedAt (list) --
The date/time that the container was started.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceDetailsOther (list) --
The details of a resource that doesn't have a specific subfield for the resource type defined.
(dict) --
The map filter for querying findings.
Key (string) --
The key of the map filter.
Value (string) --
The value for the key in the map filter.
Comparison (string) --
The condition to apply to a key value when querying for findings with a map filter.
ComplianceStatus (list) --
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS AWS Foundations. Contains security standard-related finding details.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
VerificationState (list) --
The veracity of a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
WorkflowState (list) --
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
WorkflowStatus (list) --
The status of the investigation into a finding. Allowed values are the following.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RecordState (list) --
The updated record state for the finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
RelatedFindingsId (list) --
The solution-generated identifier for a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NoteText (list) --
The text of a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
NoteUpdatedAt (list) --
The timestamp of when the note was updated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
NoteUpdatedBy (list) --
The principal that created a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value.
Comparison (string) --
The condition to be applied to a string value when querying for findings.
Keyword (list) --
A keyword for a finding.
(dict) --
A keyword filter for querying findings.
Value (string) --
A value for the keyword.
GroupByAttribute (string) --
The grouping attribute for the insight's findings. Indicates how to group the matching findings, and identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
paginator = client.get_paginator('list_enabled_products_for_import')
Creates an iterator that will paginate through responses from SecurityHub.Client.list_enabled_products_for_import().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'ProductSubscriptions': [
'string',
],
}
Response Structure
The list of ARNs for the resources that represent your subscriptions to products.
paginator = client.get_paginator('list_invitations')
Creates an iterator that will paginate through responses from SecurityHub.Client.list_invitations().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'Invitations': [
{
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
},
],
}
Response Structure
The details of the invitations returned by the operation.
Details about an invitation.
The account ID of the Security Hub master account that the invitation was sent from.
The ID of the invitation sent to the member account.
The timestamp of when the invitation was sent.
The current status of the association between the member and master accounts.
paginator = client.get_paginator('list_members')
Creates an iterator that will paginate through responses from SecurityHub.Client.list_members().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
OnlyAssociated=True|False,
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
Specifies which member accounts to include in the response based on their relationship status with the master account. The default value is TRUE .
If OnlyAssociated is set to TRUE , the response includes member accounts whose relationship status with the master is set to ENABLED or DISABLED .
If OnlyAssociated is set to FALSE , the response includes all existing member accounts.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
}
Response Structure
(dict) --
Members (list) --
Member details returned by the operation.
(dict) --
The details about a member account.
AccountId (string) --
The AWS account ID of the member account.
Email (string) --
The email address of the member account.
MasterId (string) --
The AWS account ID of the Security Hub master account associated with this member account.
MemberStatus (string) --
The status of the relationship between the member account and its master account.
InvitedAt (datetime) --
A timestamp for the date and time when the invitation was sent to the member account.
UpdatedAt (datetime) --
The timestamp for the date and time when the member account was updated.