GroundStation

Table of Contents

Client

class GroundStation.Client

A low-level client representing AWS Ground Station:

import boto3

client = boto3.client('groundstation')

These are the available methods:

can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
cancel_contact(**kwargs)

Cancels a contact with a specified contact ID.

See also: AWS API Documentation

Request Syntax

response = client.cancel_contact(
    contactId='string'
)
Parameters
contactId (string) --

[REQUIRED]

UUID of a contact.

Return type
dict
Returns
Response Syntax
{
    'contactId': 'string'
}

Response Structure

  • (dict) --
    • contactId (string) --

      UUID of a contact.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
create_config(**kwargs)

Creates a Config with the specified configData parameters.

Only one type of configData can be specified.

See also: AWS API Documentation

Request Syntax

response = client.create_config(
    configData={
        'antennaDownlinkConfig': {
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaDownlinkDemodDecodeConfig': {
            'decodeConfig': {
                'unvalidatedJSON': 'string'
            },
            'demodulationConfig': {
                'unvalidatedJSON': 'string'
            },
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaUplinkConfig': {
            'spectrumConfig': {
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            },
            'targetEirp': {
                'units': 'dBW',
                'value': 123.0
            },
            'transmitDisabled': True|False
        },
        'dataflowEndpointConfig': {
            'dataflowEndpointName': 'string',
            'dataflowEndpointRegion': 'string'
        },
        'trackingConfig': {
            'autotrack': 'PREFERRED'|'REMOVED'|'REQUIRED'
        },
        'uplinkEchoConfig': {
            'antennaUplinkConfigArn': 'string',
            'enabled': True|False
        }
    },
    name='string',
    tags={
        'string': 'string'
    }
)
Parameters
  • configData (dict) --

    [REQUIRED]

    Parameters of a Config .

    • antennaDownlinkConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for downlink during a contact.

      • spectrumConfig (dict) -- [REQUIRED]

        Object that describes a spectral Config .

        • bandwidth (dict) -- [REQUIRED]

          Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

          • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
          • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
          • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • units (string) -- [REQUIRED]

            Frequency bandwidth units.

          • value (float) -- [REQUIRED]

            Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

    • antennaDownlinkDemodDecodeConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for downlink demod decode during a contact.

      • decodeConfig (dict) -- [REQUIRED]

        Information about the decode Config .

        • unvalidatedJSON (string) -- [REQUIRED]

          Unvalidated JSON of a decode Config .

      • demodulationConfig (dict) -- [REQUIRED]

        Information about the demodulation Config .

        • unvalidatedJSON (string) -- [REQUIRED]

          Unvalidated JSON of a demodulation Config .

      • spectrumConfig (dict) -- [REQUIRED]

        Information about the spectral Config .

        • bandwidth (dict) -- [REQUIRED]

          Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

          • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
          • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
          • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • units (string) -- [REQUIRED]

            Frequency bandwidth units.

          • value (float) -- [REQUIRED]

            Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

    • antennaUplinkConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for uplink during a contact.

      • spectrumConfig (dict) -- [REQUIRED]

        Information about the uplink spectral Config .

        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of an uplink spectral Config . Valid values are between 2025 to 2120 MHz.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of an uplink spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

      • targetEirp (dict) -- [REQUIRED]

        EIRP of the target.

        • units (string) -- [REQUIRED]

          Units of an EIRP.

        • value (float) -- [REQUIRED]

          Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.

      • transmitDisabled (boolean) --

        Whether or not uplink transmit is disabled.

    • dataflowEndpointConfig (dict) --

      Information about the dataflow endpoint Config .

      • dataflowEndpointName (string) -- [REQUIRED]

        Name of a dataflow endpoint.

      • dataflowEndpointRegion (string) --

        Region of a dataflow endpoint.

    • trackingConfig (dict) --

      Object that determines whether tracking should be used during a contact executed with this Config in the mission profile.

      • autotrack (string) -- [REQUIRED]

        Current setting for autotrack.

    • uplinkEchoConfig (dict) --

      Information about an uplink echo Config .

      Parameters from the AntennaUplinkConfig , corresponding to the specified AntennaUplinkConfigArn , are used when this UplinkEchoConfig is used in a contact.

      • antennaUplinkConfigArn (string) -- [REQUIRED]

        ARN of an uplink Config .

      • enabled (boolean) -- [REQUIRED]

        Whether or not an uplink Config is enabled.

  • name (string) --

    [REQUIRED]

    Name of a Config .

  • tags (dict) --

    Tags assigned to a Config .

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'configArn': 'string',
    'configId': 'string',
    'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo'
}

Response Structure

  • (dict) --

    • configArn (string) --

      ARN of a Config .

    • configId (string) --

      UUID of a Config .

    • configType (string) --

      Type of a Config .

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceLimitExceededException
  • GroundStation.Client.exceptions.ResourceNotFoundException
create_dataflow_endpoint_group(**kwargs)

Creates a DataflowEndpoint group containing the specified list of DataflowEndpoint objects.

The name field in each endpoint is used in your mission profile DataflowEndpointConfig to specify which endpoints to use during a contact.

When a contact uses multiple DataflowEndpointConfig objects, each Config must match a DataflowEndpoint in the same group.

See also: AWS API Documentation

Request Syntax

response = client.create_dataflow_endpoint_group(
    endpointDetails=[
        {
            'endpoint': {
                'address': {
                    'name': 'string',
                    'port': 123
                },
                'mtu': 123,
                'name': 'string',
                'status': 'created'|'creating'|'deleted'|'deleting'|'failed'
            },
            'securityDetails': {
                'roleArn': 'string',
                'securityGroupIds': [
                    'string',
                ],
                'subnetIds': [
                    'string',
                ]
            }
        },
    ],
    tags={
        'string': 'string'
    }
)
Parameters
  • endpointDetails (list) --

    [REQUIRED]

    Endpoint details of each endpoint in the dataflow endpoint group.

    • (dict) --

      Information about the endpoint details.

      • endpoint (dict) --

        A dataflow endpoint.

        • address (dict) --

          Socket address of a dataflow endpoint.

          • name (string) -- [REQUIRED]

            Name of a socket address.

          • port (integer) -- [REQUIRED]

            Port of a socket address.

        • mtu (integer) --

          Maximum transmission unit (MTU) size in bytes of a dataflow endpoint.

        • name (string) --

          Name of a dataflow endpoint.

        • status (string) --

          Status of a dataflow endpoint.

      • securityDetails (dict) --

        Endpoint security details.

        • roleArn (string) -- [REQUIRED]

          ARN to a role needed for connecting streams to your instances.

        • securityGroupIds (list) -- [REQUIRED]

          The security groups to attach to the elastic network interfaces.

          • (string) --
        • subnetIds (list) -- [REQUIRED]

          A list of subnets where AWS Ground Station places elastic network interfaces to send streams to your instances.

          • (string) --
  • tags (dict) --

    Tags of a dataflow endpoint group.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'dataflowEndpointGroupId': 'string'
}

Response Structure

  • (dict) --

    • dataflowEndpointGroupId (string) --

      UUID of a dataflow endpoint group.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
create_mission_profile(**kwargs)

Creates a mission profile.

dataflowEdges is a list of lists of strings. Each lower level list of strings has two elements: a from ARN and a to ARN.

See also: AWS API Documentation

Request Syntax

response = client.create_mission_profile(
    contactPostPassDurationSeconds=123,
    contactPrePassDurationSeconds=123,
    dataflowEdges=[
        [
            'string',
        ],
    ],
    minimumViableContactDurationSeconds=123,
    name='string',
    tags={
        'string': 'string'
    },
    trackingConfigArn='string'
)
Parameters
  • contactPostPassDurationSeconds (integer) -- Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.
  • contactPrePassDurationSeconds (integer) -- Amount of time prior to contact start you’d like to receive a CloudWatch event indicating an upcoming pass.
  • dataflowEdges (list) --

    [REQUIRED]

    A list of lists of ARNs. Each list of ARNs is an edge, with a from Config and a to Config .

    • (list) --
      • (string) --
  • minimumViableContactDurationSeconds (integer) --

    [REQUIRED]

    Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.

  • name (string) --

    [REQUIRED]

    Name of a mission profile.

  • tags (dict) --

    Tags assigned to a mission profile.

    • (string) --
      • (string) --
  • trackingConfigArn (string) --

    [REQUIRED]

    ARN of a tracking Config .

Return type

dict

Returns

Response Syntax

{
    'missionProfileId': 'string'
}

Response Structure

  • (dict) --

    • missionProfileId (string) --

      UUID of a mission profile.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
delete_config(**kwargs)

Deletes a Config .

See also: AWS API Documentation

Request Syntax

response = client.delete_config(
    configId='string',
    configType='antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo'
)
Parameters
  • configId (string) --

    [REQUIRED]

    UUID of a Config .

  • configType (string) --

    [REQUIRED]

    Type of a Config .

Return type

dict

Returns

Response Syntax

{
    'configArn': 'string',
    'configId': 'string',
    'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo'
}

Response Structure

  • (dict) --

    • configArn (string) --

      ARN of a Config .

    • configId (string) --

      UUID of a Config .

    • configType (string) --

      Type of a Config .

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
delete_dataflow_endpoint_group(**kwargs)

Deletes a dataflow endpoint group.

See also: AWS API Documentation

Request Syntax

response = client.delete_dataflow_endpoint_group(
    dataflowEndpointGroupId='string'
)
Parameters
dataflowEndpointGroupId (string) --

[REQUIRED]

UUID of a dataflow endpoint group.

Return type
dict
Returns
Response Syntax
{
    'dataflowEndpointGroupId': 'string'
}

Response Structure

  • (dict) --
    • dataflowEndpointGroupId (string) --

      UUID of a dataflow endpoint group.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
delete_mission_profile(**kwargs)

Deletes a mission profile.

See also: AWS API Documentation

Request Syntax

response = client.delete_mission_profile(
    missionProfileId='string'
)
Parameters
missionProfileId (string) --

[REQUIRED]

UUID of a mission profile.

Return type
dict
Returns
Response Syntax
{
    'missionProfileId': 'string'
}

Response Structure

  • (dict) --
    • missionProfileId (string) --

      UUID of a mission profile.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
describe_contact(**kwargs)

Describes an existing contact.

See also: AWS API Documentation

Request Syntax

response = client.describe_contact(
    contactId='string'
)
Parameters
contactId (string) --

[REQUIRED]

UUID of a contact.

Return type
dict
Returns
Response Syntax
{
    'contactId': 'string',
    'contactStatus': 'AVAILABLE'|'AWS_CANCELLED'|'CANCELLED'|'CANCELLING'|'COMPLETED'|'FAILED'|'FAILED_TO_SCHEDULE'|'PASS'|'POSTPASS'|'PREPASS'|'SCHEDULED'|'SCHEDULING',
    'dataflowList': [
        {
            'destination': {
                'configDetails': {
                    'antennaDemodDecodeDetails': {
                        'outputNode': 'string'
                    },
                    'endpointDetails': {
                        'endpoint': {
                            'address': {
                                'name': 'string',
                                'port': 123
                            },
                            'mtu': 123,
                            'name': 'string',
                            'status': 'created'|'creating'|'deleted'|'deleting'|'failed'
                        },
                        'securityDetails': {
                            'roleArn': 'string',
                            'securityGroupIds': [
                                'string',
                            ],
                            'subnetIds': [
                                'string',
                            ]
                        }
                    }
                },
                'configId': 'string',
                'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
                'dataflowDestinationRegion': 'string'
            },
            'source': {
                'configDetails': {
                    'antennaDemodDecodeDetails': {
                        'outputNode': 'string'
                    },
                    'endpointDetails': {
                        'endpoint': {
                            'address': {
                                'name': 'string',
                                'port': 123
                            },
                            'mtu': 123,
                            'name': 'string',
                            'status': 'created'|'creating'|'deleted'|'deleting'|'failed'
                        },
                        'securityDetails': {
                            'roleArn': 'string',
                            'securityGroupIds': [
                                'string',
                            ],
                            'subnetIds': [
                                'string',
                            ]
                        }
                    }
                },
                'configId': 'string',
                'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
                'dataflowSourceRegion': 'string'
            }
        },
    ],
    'endTime': datetime(2015, 1, 1),
    'errorMessage': 'string',
    'groundStation': 'string',
    'maximumElevation': {
        'unit': 'DEGREE_ANGLE'|'RADIAN',
        'value': 123.0
    },
    'missionProfileArn': 'string',
    'postPassEndTime': datetime(2015, 1, 1),
    'prePassStartTime': datetime(2015, 1, 1),
    'region': 'string',
    'satelliteArn': 'string',
    'startTime': datetime(2015, 1, 1),
    'tags': {
        'string': 'string'
    }
}

Response Structure

  • (dict) --
    • contactId (string) --

      UUID of a contact.

    • contactStatus (string) --

      Status of a contact.

    • dataflowList (list) --

      List describing source and destination details for each dataflow edge.

      • (dict) --

        Information about a dataflow edge used in a contact.

        • destination (dict) --

          Dataflow details for the destination side.

          • configDetails (dict) --

            Additional details for a Config , if type is dataflow endpoint or antenna demod decode.

            • antennaDemodDecodeDetails (dict) --

              Details for antenna demod decode Config in a contact.

              • outputNode (string) --

                Name of an antenna demod decode output node used in a contact.

            • endpointDetails (dict) --

              Information about the endpoint details.

              • endpoint (dict) --

                A dataflow endpoint.

                • address (dict) --

                  Socket address of a dataflow endpoint.

                  • name (string) --

                    Name of a socket address.

                  • port (integer) --

                    Port of a socket address.

                • mtu (integer) --

                  Maximum transmission unit (MTU) size in bytes of a dataflow endpoint.

                • name (string) --

                  Name of a dataflow endpoint.

                • status (string) --

                  Status of a dataflow endpoint.

              • securityDetails (dict) --

                Endpoint security details.

                • roleArn (string) --

                  ARN to a role needed for connecting streams to your instances.

                • securityGroupIds (list) --

                  The security groups to attach to the elastic network interfaces.

                  • (string) --
                • subnetIds (list) --

                  A list of subnets where AWS Ground Station places elastic network interfaces to send streams to your instances.

                  • (string) --
          • configId (string) --

            UUID of a Config .

          • configType (string) --

            Type of a Config .

          • dataflowDestinationRegion (string) --

            Region of a dataflow destination.

        • source (dict) --

          Dataflow details for the source side.

          • configDetails (dict) --

            Additional details for a Config , if type is dataflow endpoint or antenna demod decode.

            • antennaDemodDecodeDetails (dict) --

              Details for antenna demod decode Config in a contact.

              • outputNode (string) --

                Name of an antenna demod decode output node used in a contact.

            • endpointDetails (dict) --

              Information about the endpoint details.

              • endpoint (dict) --

                A dataflow endpoint.

                • address (dict) --

                  Socket address of a dataflow endpoint.

                  • name (string) --

                    Name of a socket address.

                  • port (integer) --

                    Port of a socket address.

                • mtu (integer) --

                  Maximum transmission unit (MTU) size in bytes of a dataflow endpoint.

                • name (string) --

                  Name of a dataflow endpoint.

                • status (string) --

                  Status of a dataflow endpoint.

              • securityDetails (dict) --

                Endpoint security details.

                • roleArn (string) --

                  ARN to a role needed for connecting streams to your instances.

                • securityGroupIds (list) --

                  The security groups to attach to the elastic network interfaces.

                  • (string) --
                • subnetIds (list) --

                  A list of subnets where AWS Ground Station places elastic network interfaces to send streams to your instances.

                  • (string) --
          • configId (string) --

            UUID of a Config .

          • configType (string) --

            Type of a Config .

          • dataflowSourceRegion (string) --

            Region of a dataflow source.

    • endTime (datetime) --

      End time of a contact.

    • errorMessage (string) --

      Error message for a contact.

    • groundStation (string) --

      Ground station for a contact.

    • maximumElevation (dict) --

      Maximum elevation angle of a contact.

      • unit (string) --

        Elevation angle units.

      • value (float) --

        Elevation angle value.

    • missionProfileArn (string) --

      ARN of a mission profile.

    • postPassEndTime (datetime) --

      Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.

    • prePassStartTime (datetime) --

      Amount of time prior to contact start you’d like to receive a CloudWatch event indicating an upcoming pass.

    • region (string) --

      Region of a contact.

    • satelliteArn (string) --

      ARN of a satellite.

    • startTime (datetime) --

      Start time of a contact.

    • tags (dict) --

      Tags assigned to a contact.

      • (string) --
        • (string) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_config(**kwargs)

Returns Config information.

Only one Config response can be returned.

See also: AWS API Documentation

Request Syntax

response = client.get_config(
    configId='string',
    configType='antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo'
)
Parameters
  • configId (string) --

    [REQUIRED]

    UUID of a Config .

  • configType (string) --

    [REQUIRED]

    Type of a Config .

Return type

dict

Returns

Response Syntax

{
    'configArn': 'string',
    'configData': {
        'antennaDownlinkConfig': {
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaDownlinkDemodDecodeConfig': {
            'decodeConfig': {
                'unvalidatedJSON': 'string'
            },
            'demodulationConfig': {
                'unvalidatedJSON': 'string'
            },
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaUplinkConfig': {
            'spectrumConfig': {
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            },
            'targetEirp': {
                'units': 'dBW',
                'value': 123.0
            },
            'transmitDisabled': True|False
        },
        'dataflowEndpointConfig': {
            'dataflowEndpointName': 'string',
            'dataflowEndpointRegion': 'string'
        },
        'trackingConfig': {
            'autotrack': 'PREFERRED'|'REMOVED'|'REQUIRED'
        },
        'uplinkEchoConfig': {
            'antennaUplinkConfigArn': 'string',
            'enabled': True|False
        }
    },
    'configId': 'string',
    'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
    'name': 'string',
    'tags': {
        'string': 'string'
    }
}

Response Structure

  • (dict) --

    • configArn (string) --

      ARN of a Config

    • configData (dict) --

      Data elements in a Config .

      • antennaDownlinkConfig (dict) --

        Information about how AWS Ground Station should configure an antenna for downlink during a contact.

        • spectrumConfig (dict) --

          Object that describes a spectral Config .

          • bandwidth (dict) --

            Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
            • units (string) --

              Frequency bandwidth units.

            • value (float) --

              Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

              • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
              • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
              • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • centerFrequency (dict) --

            Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

            • units (string) --

              Frequency units.

            • value (float) --

              Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • polarization (string) --

            Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

      • antennaDownlinkDemodDecodeConfig (dict) --

        Information about how AWS Ground Station should configure an antenna for downlink demod decode during a contact.

        • decodeConfig (dict) --

          Information about the decode Config .

          • unvalidatedJSON (string) --

            Unvalidated JSON of a decode Config .

        • demodulationConfig (dict) --

          Information about the demodulation Config .

          • unvalidatedJSON (string) --

            Unvalidated JSON of a demodulation Config .

        • spectrumConfig (dict) --

          Information about the spectral Config .

          • bandwidth (dict) --

            Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
            • units (string) --

              Frequency bandwidth units.

            • value (float) --

              Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

              • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
              • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
              • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • centerFrequency (dict) --

            Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

            • units (string) --

              Frequency units.

            • value (float) --

              Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • polarization (string) --

            Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

      • antennaUplinkConfig (dict) --

        Information about how AWS Ground Station should configure an antenna for uplink during a contact.

        • spectrumConfig (dict) --

          Information about the uplink spectral Config .

          • centerFrequency (dict) --

            Center frequency of an uplink spectral Config . Valid values are between 2025 to 2120 MHz.

            • units (string) --

              Frequency units.

            • value (float) --

              Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • polarization (string) --

            Polarization of an uplink spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

        • targetEirp (dict) --

          EIRP of the target.

          • units (string) --

            Units of an EIRP.

          • value (float) --

            Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.

        • transmitDisabled (boolean) --

          Whether or not uplink transmit is disabled.

      • dataflowEndpointConfig (dict) --

        Information about the dataflow endpoint Config .

        • dataflowEndpointName (string) --

          Name of a dataflow endpoint.

        • dataflowEndpointRegion (string) --

          Region of a dataflow endpoint.

      • trackingConfig (dict) --

        Object that determines whether tracking should be used during a contact executed with this Config in the mission profile.

        • autotrack (string) --

          Current setting for autotrack.

      • uplinkEchoConfig (dict) --

        Information about an uplink echo Config .

        Parameters from the AntennaUplinkConfig , corresponding to the specified AntennaUplinkConfigArn , are used when this UplinkEchoConfig is used in a contact.

        • antennaUplinkConfigArn (string) --

          ARN of an uplink Config .

        • enabled (boolean) --

          Whether or not an uplink Config is enabled.

    • configId (string) --

      UUID of a Config .

    • configType (string) --

      Type of a Config .

    • name (string) --

      Name of a Config .

    • tags (dict) --

      Tags assigned to a Config .

      • (string) --
        • (string) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
get_dataflow_endpoint_group(**kwargs)

Returns the dataflow endpoint group.

See also: AWS API Documentation

Request Syntax

response = client.get_dataflow_endpoint_group(
    dataflowEndpointGroupId='string'
)
Parameters
dataflowEndpointGroupId (string) --

[REQUIRED]

UUID of a dataflow endpoint group.

Return type
dict
Returns
Response Syntax
{
    'dataflowEndpointGroupArn': 'string',
    'dataflowEndpointGroupId': 'string',
    'endpointsDetails': [
        {
            'endpoint': {
                'address': {
                    'name': 'string',
                    'port': 123
                },
                'mtu': 123,
                'name': 'string',
                'status': 'created'|'creating'|'deleted'|'deleting'|'failed'
            },
            'securityDetails': {
                'roleArn': 'string',
                'securityGroupIds': [
                    'string',
                ],
                'subnetIds': [
                    'string',
                ]
            }
        },
    ],
    'tags': {
        'string': 'string'
    }
}

Response Structure

  • (dict) --
    • dataflowEndpointGroupArn (string) --

      ARN of a dataflow endpoint group.

    • dataflowEndpointGroupId (string) --

      UUID of a dataflow endpoint group.

    • endpointsDetails (list) --

      Details of a dataflow endpoint.

      • (dict) --

        Information about the endpoint details.

        • endpoint (dict) --

          A dataflow endpoint.

          • address (dict) --

            Socket address of a dataflow endpoint.

            • name (string) --

              Name of a socket address.

            • port (integer) --

              Port of a socket address.

          • mtu (integer) --

            Maximum transmission unit (MTU) size in bytes of a dataflow endpoint.

          • name (string) --

            Name of a dataflow endpoint.

          • status (string) --

            Status of a dataflow endpoint.

        • securityDetails (dict) --

          Endpoint security details.

          • roleArn (string) --

            ARN to a role needed for connecting streams to your instances.

          • securityGroupIds (list) --

            The security groups to attach to the elastic network interfaces.

            • (string) --
          • subnetIds (list) --

            A list of subnets where AWS Ground Station places elastic network interfaces to send streams to your instances.

            • (string) --
    • tags (dict) --

      Tags assigned to a dataflow endpoint group.

      • (string) --
        • (string) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
get_minute_usage(**kwargs)

Returns the number of minutes used by account.

See also: AWS API Documentation

Request Syntax

response = client.get_minute_usage(
    month=123,
    year=123
)
Parameters
  • month (integer) --

    [REQUIRED]

    The month being requested, with a value of 1-12.

  • year (integer) --

    [REQUIRED]

    The year being requested, in the format of YYYY.

Return type

dict

Returns

Response Syntax

{
    'estimatedMinutesRemaining': 123,
    'isReservedMinutesCustomer': True|False,
    'totalReservedMinuteAllocation': 123,
    'totalScheduledMinutes': 123,
    'upcomingMinutesScheduled': 123
}

Response Structure

  • (dict) --

    • estimatedMinutesRemaining (integer) --

      Estimated number of minutes remaining for an account, specific to the month being requested.

    • isReservedMinutesCustomer (boolean) --

      Returns whether or not an account has signed up for the reserved minutes pricing plan, specific to the month being requested.

    • totalReservedMinuteAllocation (integer) --

      Total number of reserved minutes allocated, specific to the month being requested.

    • totalScheduledMinutes (integer) --

      Total scheduled minutes for an account, specific to the month being requested.

    • upcomingMinutesScheduled (integer) --

      Upcoming minutes scheduled for an account, specific to the month being requested.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
get_mission_profile(**kwargs)

Returns a mission profile.

See also: AWS API Documentation

Request Syntax

response = client.get_mission_profile(
    missionProfileId='string'
)
Parameters
missionProfileId (string) --

[REQUIRED]

UUID of a mission profile.

Return type
dict
Returns
Response Syntax
{
    'contactPostPassDurationSeconds': 123,
    'contactPrePassDurationSeconds': 123,
    'dataflowEdges': [
        [
            'string',
        ],
    ],
    'minimumViableContactDurationSeconds': 123,
    'missionProfileArn': 'string',
    'missionProfileId': 'string',
    'name': 'string',
    'region': 'string',
    'tags': {
        'string': 'string'
    },
    'trackingConfigArn': 'string'
}

Response Structure

  • (dict) --
    • contactPostPassDurationSeconds (integer) --

      Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.

    • contactPrePassDurationSeconds (integer) --

      Amount of time prior to contact start you’d like to receive a CloudWatch event indicating an upcoming pass.

    • dataflowEdges (list) --

      A list of lists of ARNs. Each list of ARNs is an edge, with a from Config and a to Config .

      • (list) --
        • (string) --
    • minimumViableContactDurationSeconds (integer) --

      Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.

    • missionProfileArn (string) --

      ARN of a mission profile.

    • missionProfileId (string) --

      UUID of a mission profile.

    • name (string) --

      Name of a mission profile.

    • region (string) --

      Region of a mission profile.

    • tags (dict) --

      Tags assigned to a mission profile.

      • (string) --
        • (string) --
    • trackingConfigArn (string) --

      ARN of a tracking Config .

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_satellite(**kwargs)

Returns a satellite.

See also: AWS API Documentation

Request Syntax

response = client.get_satellite(
    satelliteId='string'
)
Parameters
satelliteId (string) --

[REQUIRED]

UUID of a satellite.

Return type
dict
Returns
Response Syntax
{
    'groundStations': [
        'string',
    ],
    'noradSatelliteID': 123,
    'satelliteArn': 'string',
    'satelliteId': 'string'
}

Response Structure

  • (dict) --
    • groundStations (list) --

      A list of ground stations to which the satellite is on-boarded.

      • (string) --
    • noradSatelliteID (integer) --

      NORAD satellite ID number.

    • satelliteArn (string) --

      ARN of a satellite.

    • satelliteId (string) --

      UUID of a satellite.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_configs(**kwargs)

Returns a list of Config objects.

See also: AWS API Documentation

Request Syntax

response = client.list_configs(
    maxResults=123,
    nextToken='string'
)
Parameters
  • maxResults (integer) -- Maximum number of Configs returned.
  • nextToken (string) -- Next token returned in the request of a previous ListConfigs call. Used to get the next page of results.
Return type

dict

Returns

Response Syntax

{
    'configList': [
        {
            'configArn': 'string',
            'configId': 'string',
            'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
            'name': 'string'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • configList (list) --

      List of Config items.

      • (dict) --

        An item in a list of Config objects.

        • configArn (string) --

          ARN of a Config .

        • configId (string) --

          UUID of a Config .

        • configType (string) --

          Type of a Config .

        • name (string) --

          Name of a Config .

    • nextToken (string) --

      Next token returned in the response of a previous ListConfigs call. Used to get the next page of results.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_contacts(**kwargs)

Returns a list of contacts.

If statusList contains AVAILABLE, the request must include groundStation , missionprofileArn , and satelliteArn .

See also: AWS API Documentation

Request Syntax

response = client.list_contacts(
    endTime=datetime(2015, 1, 1),
    groundStation='string',
    maxResults=123,
    missionProfileArn='string',
    nextToken='string',
    satelliteArn='string',
    startTime=datetime(2015, 1, 1),
    statusList=[
        'AVAILABLE'|'AWS_CANCELLED'|'CANCELLED'|'CANCELLING'|'COMPLETED'|'FAILED'|'FAILED_TO_SCHEDULE'|'PASS'|'POSTPASS'|'PREPASS'|'SCHEDULED'|'SCHEDULING',
    ]
)
Parameters
  • endTime (datetime) --

    [REQUIRED]

    End time of a contact.

  • groundStation (string) -- Name of a ground station.
  • maxResults (integer) -- Maximum number of contacts returned.
  • missionProfileArn (string) -- ARN of a mission profile.
  • nextToken (string) -- Next token returned in the request of a previous ListContacts call. Used to get the next page of results.
  • satelliteArn (string) -- ARN of a satellite.
  • startTime (datetime) --

    [REQUIRED]

    Start time of a contact.

  • statusList (list) --

    [REQUIRED]

    Status of a contact reservation.

    • (string) --
Return type

dict

Returns

Response Syntax

{
    'contactList': [
        {
            'contactId': 'string',
            'contactStatus': 'AVAILABLE'|'AWS_CANCELLED'|'CANCELLED'|'CANCELLING'|'COMPLETED'|'FAILED'|'FAILED_TO_SCHEDULE'|'PASS'|'POSTPASS'|'PREPASS'|'SCHEDULED'|'SCHEDULING',
            'endTime': datetime(2015, 1, 1),
            'errorMessage': 'string',
            'groundStation': 'string',
            'maximumElevation': {
                'unit': 'DEGREE_ANGLE'|'RADIAN',
                'value': 123.0
            },
            'missionProfileArn': 'string',
            'postPassEndTime': datetime(2015, 1, 1),
            'prePassStartTime': datetime(2015, 1, 1),
            'region': 'string',
            'satelliteArn': 'string',
            'startTime': datetime(2015, 1, 1),
            'tags': {
                'string': 'string'
            }
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • contactList (list) --

      List of contacts.

      • (dict) --

        Data describing a contact.

        • contactId (string) --

          UUID of a contact.

        • contactStatus (string) --

          Status of a contact.

        • endTime (datetime) --

          End time of a contact.

        • errorMessage (string) --

          Error message of a contact.

        • groundStation (string) --

          Name of a ground station.

        • maximumElevation (dict) --

          Maximum elevation angle of a contact.

          • unit (string) --

            Elevation angle units.

          • value (float) --

            Elevation angle value.

        • missionProfileArn (string) --

          ARN of a mission profile.

        • postPassEndTime (datetime) --

          Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.

        • prePassStartTime (datetime) --

          Amount of time prior to contact start you’d like to receive a CloudWatch event indicating an upcoming pass.

        • region (string) --

          Region of a contact.

        • satelliteArn (string) --

          ARN of a satellite.

        • startTime (datetime) --

          Start time of a contact.

        • tags (dict) --

          Tags assigned to a contact.

          • (string) --
            • (string) --
    • nextToken (string) --

      Next token returned in the response of a previous ListContacts call. Used to get the next page of results.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_dataflow_endpoint_groups(**kwargs)

Returns a list of DataflowEndpoint groups.

See also: AWS API Documentation

Request Syntax

response = client.list_dataflow_endpoint_groups(
    maxResults=123,
    nextToken='string'
)
Parameters
  • maxResults (integer) -- Maximum number of dataflow endpoint groups returned.
  • nextToken (string) -- Next token returned in the request of a previous ListDataflowEndpointGroups call. Used to get the next page of results.
Return type

dict

Returns

Response Syntax

{
    'dataflowEndpointGroupList': [
        {
            'dataflowEndpointGroupArn': 'string',
            'dataflowEndpointGroupId': 'string'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • dataflowEndpointGroupList (list) --

      A list of dataflow endpoint groups.

      • (dict) --

        Item in a list of DataflowEndpoint groups.

        • dataflowEndpointGroupArn (string) --

          ARN of a dataflow endpoint group.

        • dataflowEndpointGroupId (string) --

          UUID of a dataflow endpoint group.

    • nextToken (string) --

      Next token returned in the response of a previous ListDataflowEndpointGroups call. Used to get the next page of results.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_ground_stations(**kwargs)

Returns a list of ground stations.

See also: AWS API Documentation

Request Syntax

response = client.list_ground_stations(
    maxResults=123,
    nextToken='string',
    satelliteId='string'
)
Parameters
  • maxResults (integer) -- Maximum number of ground stations returned.
  • nextToken (string) -- Next token that can be supplied in the next call to get the next page of ground stations.
  • satelliteId (string) -- Satellite ID to retrieve on-boarded ground stations.
Return type

dict

Returns

Response Syntax

{
    'groundStationList': [
        {
            'groundStationId': 'string',
            'groundStationName': 'string',
            'region': 'string'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • groundStationList (list) --

      List of ground stations.

      • (dict) --

        Information about the ground station data.

        • groundStationId (string) --

          UUID of a ground station.

        • groundStationName (string) --

          Name of a ground station.

        • region (string) --

          Ground station Region.

    • nextToken (string) --

      Next token that can be supplied in the next call to get the next page of ground stations.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_mission_profiles(**kwargs)

Returns a list of mission profiles.

See also: AWS API Documentation

Request Syntax

response = client.list_mission_profiles(
    maxResults=123,
    nextToken='string'
)
Parameters
  • maxResults (integer) -- Maximum number of mission profiles returned.
  • nextToken (string) -- Next token returned in the request of a previous ListMissionProfiles call. Used to get the next page of results.
Return type

dict

Returns

Response Syntax

{
    'missionProfileList': [
        {
            'missionProfileArn': 'string',
            'missionProfileId': 'string',
            'name': 'string',
            'region': 'string'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • missionProfileList (list) --

      List of mission profiles.

      • (dict) --

        Item in a list of mission profiles.

        • missionProfileArn (string) --

          ARN of a mission profile.

        • missionProfileId (string) --

          UUID of a mission profile.

        • name (string) --

          Name of a mission profile.

        • region (string) --

          Region of a mission profile.

    • nextToken (string) --

      Next token returned in the response of a previous ListMissionProfiles call. Used to get the next page of results.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_satellites(**kwargs)

Returns a list of satellites.

See also: AWS API Documentation

Request Syntax

response = client.list_satellites(
    maxResults=123,
    nextToken='string'
)
Parameters
  • maxResults (integer) -- Maximum number of satellites returned.
  • nextToken (string) -- Next token that can be supplied in the next call to get the next page of satellites.
Return type

dict

Returns

Response Syntax

{
    'nextToken': 'string',
    'satellites': [
        {
            'groundStations': [
                'string',
            ],
            'noradSatelliteID': 123,
            'satelliteArn': 'string',
            'satelliteId': 'string'
        },
    ]
}

Response Structure

  • (dict) --

    • nextToken (string) --

      Next token that can be supplied in the next call to get the next page of satellites.

    • satellites (list) --

      List of satellites.

      • (dict) --

        Item in a list of satellites.

        • groundStations (list) --

          A list of ground stations to which the satellite is on-boarded.

          • (string) --
        • noradSatelliteID (integer) --

          NORAD satellite ID number.

        • satelliteArn (string) --

          ARN of a satellite.

        • satelliteId (string) --

          UUID of a satellite.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
list_tags_for_resource(**kwargs)

Returns a list of tags for a specified resource.

See also: AWS API Documentation

Request Syntax

response = client.list_tags_for_resource(
    resourceArn='string'
)
Parameters
resourceArn (string) --

[REQUIRED]

ARN of a resource.

Return type
dict
Returns
Response Syntax
{
    'tags': {
        'string': 'string'
    }
}

Response Structure

  • (dict) --
    • tags (dict) --

      Tags assigned to a resource.

      • (string) --
        • (string) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
reserve_contact(**kwargs)

Reserves a contact using specified parameters.

See also: AWS API Documentation

Request Syntax

response = client.reserve_contact(
    endTime=datetime(2015, 1, 1),
    groundStation='string',
    missionProfileArn='string',
    satelliteArn='string',
    startTime=datetime(2015, 1, 1),
    tags={
        'string': 'string'
    }
)
Parameters
  • endTime (datetime) --

    [REQUIRED]

    End time of a contact.

  • groundStation (string) --

    [REQUIRED]

    Name of a ground station.

  • missionProfileArn (string) --

    [REQUIRED]

    ARN of a mission profile.

  • satelliteArn (string) --

    [REQUIRED]

    ARN of a satellite

  • startTime (datetime) --

    [REQUIRED]

    Start time of a contact.

  • tags (dict) --

    Tags assigned to a contact.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'contactId': 'string'
}

Response Structure

  • (dict) --

    • contactId (string) --

      UUID of a contact.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
tag_resource(**kwargs)

Assigns a tag to a resource.

See also: AWS API Documentation

Request Syntax

response = client.tag_resource(
    resourceArn='string',
    tags={
        'string': 'string'
    }
)
Parameters
  • resourceArn (string) --

    [REQUIRED]

    ARN of a resource tag.

  • tags (dict) --

    [REQUIRED]

    Tags assigned to a resource.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
untag_resource(**kwargs)

Deassigns a resource tag.

See also: AWS API Documentation

Request Syntax

response = client.untag_resource(
    resourceArn='string',
    tagKeys=[
        'string',
    ]
)
Parameters
  • resourceArn (string) --

    [REQUIRED]

    ARN of a resource.

  • tagKeys (list) --

    [REQUIRED]

    Keys of a resource tag.

    • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
update_config(**kwargs)

Updates the Config used when scheduling contacts.

Updating a Config will not update the execution parameters for existing future contacts scheduled with this Config .

See also: AWS API Documentation

Request Syntax

response = client.update_config(
    configData={
        'antennaDownlinkConfig': {
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaDownlinkDemodDecodeConfig': {
            'decodeConfig': {
                'unvalidatedJSON': 'string'
            },
            'demodulationConfig': {
                'unvalidatedJSON': 'string'
            },
            'spectrumConfig': {
                'bandwidth': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            }
        },
        'antennaUplinkConfig': {
            'spectrumConfig': {
                'centerFrequency': {
                    'units': 'GHz'|'MHz'|'kHz',
                    'value': 123.0
                },
                'polarization': 'LEFT_HAND'|'NONE'|'RIGHT_HAND'
            },
            'targetEirp': {
                'units': 'dBW',
                'value': 123.0
            },
            'transmitDisabled': True|False
        },
        'dataflowEndpointConfig': {
            'dataflowEndpointName': 'string',
            'dataflowEndpointRegion': 'string'
        },
        'trackingConfig': {
            'autotrack': 'PREFERRED'|'REMOVED'|'REQUIRED'
        },
        'uplinkEchoConfig': {
            'antennaUplinkConfigArn': 'string',
            'enabled': True|False
        }
    },
    configId='string',
    configType='antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
    name='string'
)
Parameters
  • configData (dict) --

    [REQUIRED]

    Parameters of a Config .

    • antennaDownlinkConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for downlink during a contact.

      • spectrumConfig (dict) -- [REQUIRED]

        Object that describes a spectral Config .

        • bandwidth (dict) -- [REQUIRED]

          Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

          • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
          • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
          • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • units (string) -- [REQUIRED]

            Frequency bandwidth units.

          • value (float) -- [REQUIRED]

            Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

    • antennaDownlinkDemodDecodeConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for downlink demod decode during a contact.

      • decodeConfig (dict) -- [REQUIRED]

        Information about the decode Config .

        • unvalidatedJSON (string) -- [REQUIRED]

          Unvalidated JSON of a decode Config .

      • demodulationConfig (dict) -- [REQUIRED]

        Information about the demodulation Config .

        • unvalidatedJSON (string) -- [REQUIRED]

          Unvalidated JSON of a demodulation Config .

      • spectrumConfig (dict) -- [REQUIRED]

        Information about the spectral Config .

        • bandwidth (dict) -- [REQUIRED]

          Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

          • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
          • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
          • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
          • units (string) -- [REQUIRED]

            Frequency bandwidth units.

          • value (float) -- [REQUIRED]

            Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

            • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.
            • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.
            • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.
        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

    • antennaUplinkConfig (dict) --

      Information about how AWS Ground Station should configure an antenna for uplink during a contact.

      • spectrumConfig (dict) -- [REQUIRED]

        Information about the uplink spectral Config .

        • centerFrequency (dict) -- [REQUIRED]

          Center frequency of an uplink spectral Config . Valid values are between 2025 to 2120 MHz.

          • units (string) -- [REQUIRED]

            Frequency units.

          • value (float) -- [REQUIRED]

            Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

        • polarization (string) --

          Polarization of an uplink spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

      • targetEirp (dict) -- [REQUIRED]

        EIRP of the target.

        • units (string) -- [REQUIRED]

          Units of an EIRP.

        • value (float) -- [REQUIRED]

          Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.

      • transmitDisabled (boolean) --

        Whether or not uplink transmit is disabled.

    • dataflowEndpointConfig (dict) --

      Information about the dataflow endpoint Config .

      • dataflowEndpointName (string) -- [REQUIRED]

        Name of a dataflow endpoint.

      • dataflowEndpointRegion (string) --

        Region of a dataflow endpoint.

    • trackingConfig (dict) --

      Object that determines whether tracking should be used during a contact executed with this Config in the mission profile.

      • autotrack (string) -- [REQUIRED]

        Current setting for autotrack.

    • uplinkEchoConfig (dict) --

      Information about an uplink echo Config .

      Parameters from the AntennaUplinkConfig , corresponding to the specified AntennaUplinkConfigArn , are used when this UplinkEchoConfig is used in a contact.

      • antennaUplinkConfigArn (string) -- [REQUIRED]

        ARN of an uplink Config .

      • enabled (boolean) -- [REQUIRED]

        Whether or not an uplink Config is enabled.

  • configId (string) --

    [REQUIRED]

    UUID of a Config .

  • configType (string) --

    [REQUIRED]

    Type of a Config .

  • name (string) --

    [REQUIRED]

    Name of a Config .

Return type

dict

Returns

Response Syntax

{
    'configArn': 'string',
    'configId': 'string',
    'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo'
}

Response Structure

  • (dict) --

    • configArn (string) --

      ARN of a Config .

    • configId (string) --

      UUID of a Config .

    • configType (string) --

      Type of a Config .

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException
update_mission_profile(**kwargs)

Updates a mission profile.

Updating a mission profile will not update the execution parameters for existing future contacts.

See also: AWS API Documentation

Request Syntax

response = client.update_mission_profile(
    contactPostPassDurationSeconds=123,
    contactPrePassDurationSeconds=123,
    dataflowEdges=[
        [
            'string',
        ],
    ],
    minimumViableContactDurationSeconds=123,
    missionProfileId='string',
    name='string',
    trackingConfigArn='string'
)
Parameters
  • contactPostPassDurationSeconds (integer) -- Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.
  • contactPrePassDurationSeconds (integer) -- Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.
  • dataflowEdges (list) --

    A list of lists of ARNs. Each list of ARNs is an edge, with a from Config and a to Config .

    • (list) --
      • (string) --
  • minimumViableContactDurationSeconds (integer) -- Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.
  • missionProfileId (string) --

    [REQUIRED]

    UUID of a mission profile.

  • name (string) -- Name of a mission profile.
  • trackingConfigArn (string) -- ARN of a tracking Config .
Return type

dict

Returns

Response Syntax

{
    'missionProfileId': 'string'
}

Response Structure

  • (dict) --

    • missionProfileId (string) --

      UUID of a mission profile.

Exceptions

  • GroundStation.Client.exceptions.InvalidParameterException
  • GroundStation.Client.exceptions.DependencyException
  • GroundStation.Client.exceptions.ResourceNotFoundException

Paginators

The available paginators are:

class GroundStation.Paginator.ListConfigs
paginator = client.get_paginator('list_configs')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_configs().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'configList': [
        {
            'configArn': 'string',
            'configId': 'string',
            'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'antenna-uplink'|'dataflow-endpoint'|'tracking'|'uplink-echo',
            'name': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • configList (list) --

      List of Config items.

      • (dict) --

        An item in a list of Config objects.

        • configArn (string) --

          ARN of a Config .

        • configId (string) --

          UUID of a Config .

        • configType (string) --

          Type of a Config .

        • name (string) --

          Name of a Config .

    • NextToken (string) --

      A token to resume pagination.

class GroundStation.Paginator.ListContacts
paginator = client.get_paginator('list_contacts')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_contacts().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    endTime=datetime(2015, 1, 1),
    groundStation='string',
    missionProfileArn='string',
    satelliteArn='string',
    startTime=datetime(2015, 1, 1),
    statusList=[
        'AVAILABLE'|'AWS_CANCELLED'|'CANCELLED'|'CANCELLING'|'COMPLETED'|'FAILED'|'FAILED_TO_SCHEDULE'|'PASS'|'POSTPASS'|'PREPASS'|'SCHEDULED'|'SCHEDULING',
    ],
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • endTime (datetime) --

    [REQUIRED]

    End time of a contact.

  • groundStation (string) -- Name of a ground station.
  • missionProfileArn (string) -- ARN of a mission profile.
  • satelliteArn (string) -- ARN of a satellite.
  • startTime (datetime) --

    [REQUIRED]

    Start time of a contact.

  • statusList (list) --

    [REQUIRED]

    Status of a contact reservation.

    • (string) --
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'contactList': [
        {
            'contactId': 'string',
            'contactStatus': 'AVAILABLE'|'AWS_CANCELLED'|'CANCELLED'|'CANCELLING'|'COMPLETED'|'FAILED'|'FAILED_TO_SCHEDULE'|'PASS'|'POSTPASS'|'PREPASS'|'SCHEDULED'|'SCHEDULING',
            'endTime': datetime(2015, 1, 1),
            'errorMessage': 'string',
            'groundStation': 'string',
            'maximumElevation': {
                'unit': 'DEGREE_ANGLE'|'RADIAN',
                'value': 123.0
            },
            'missionProfileArn': 'string',
            'postPassEndTime': datetime(2015, 1, 1),
            'prePassStartTime': datetime(2015, 1, 1),
            'region': 'string',
            'satelliteArn': 'string',
            'startTime': datetime(2015, 1, 1),
            'tags': {
                'string': 'string'
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • contactList (list) --

      List of contacts.

      • (dict) --

        Data describing a contact.

        • contactId (string) --

          UUID of a contact.

        • contactStatus (string) --

          Status of a contact.

        • endTime (datetime) --

          End time of a contact.

        • errorMessage (string) --

          Error message of a contact.

        • groundStation (string) --

          Name of a ground station.

        • maximumElevation (dict) --

          Maximum elevation angle of a contact.

          • unit (string) --

            Elevation angle units.

          • value (float) --

            Elevation angle value.

        • missionProfileArn (string) --

          ARN of a mission profile.

        • postPassEndTime (datetime) --

          Amount of time after a contact ends that you’d like to receive a CloudWatch event indicating the pass has finished.

        • prePassStartTime (datetime) --

          Amount of time prior to contact start you’d like to receive a CloudWatch event indicating an upcoming pass.

        • region (string) --

          Region of a contact.

        • satelliteArn (string) --

          ARN of a satellite.

        • startTime (datetime) --

          Start time of a contact.

        • tags (dict) --

          Tags assigned to a contact.

          • (string) --
            • (string) --
    • NextToken (string) --

      A token to resume pagination.

class GroundStation.Paginator.ListDataflowEndpointGroups
paginator = client.get_paginator('list_dataflow_endpoint_groups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_dataflow_endpoint_groups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'dataflowEndpointGroupList': [
        {
            'dataflowEndpointGroupArn': 'string',
            'dataflowEndpointGroupId': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • dataflowEndpointGroupList (list) --

      A list of dataflow endpoint groups.

      • (dict) --

        Item in a list of DataflowEndpoint groups.

        • dataflowEndpointGroupArn (string) --

          ARN of a dataflow endpoint group.

        • dataflowEndpointGroupId (string) --

          UUID of a dataflow endpoint group.

    • NextToken (string) --

      A token to resume pagination.

class GroundStation.Paginator.ListGroundStations
paginator = client.get_paginator('list_ground_stations')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_ground_stations().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    satelliteId='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • satelliteId (string) -- Satellite ID to retrieve on-boarded ground stations.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'groundStationList': [
        {
            'groundStationId': 'string',
            'groundStationName': 'string',
            'region': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • groundStationList (list) --

      List of ground stations.

      • (dict) --

        Information about the ground station data.

        • groundStationId (string) --

          UUID of a ground station.

        • groundStationName (string) --

          Name of a ground station.

        • region (string) --

          Ground station Region.

    • NextToken (string) --

      A token to resume pagination.

class GroundStation.Paginator.ListMissionProfiles
paginator = client.get_paginator('list_mission_profiles')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_mission_profiles().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'missionProfileList': [
        {
            'missionProfileArn': 'string',
            'missionProfileId': 'string',
            'name': 'string',
            'region': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • missionProfileList (list) --

      List of mission profiles.

      • (dict) --

        Item in a list of mission profiles.

        • missionProfileArn (string) --

          ARN of a mission profile.

        • missionProfileId (string) --

          UUID of a mission profile.

        • name (string) --

          Name of a mission profile.

        • region (string) --

          Region of a mission profile.

    • NextToken (string) --

      A token to resume pagination.

class GroundStation.Paginator.ListSatellites
paginator = client.get_paginator('list_satellites')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GroundStation.Client.list_satellites().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'satellites': [
        {
            'groundStations': [
                'string',
            ],
            'noradSatelliteID': 123,
            'satelliteArn': 'string',
            'satelliteId': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • satellites (list) --

      List of satellites.

      • (dict) --

        Item in a list of satellites.

        • groundStations (list) --

          A list of ground stations to which the satellite is on-boarded.

          • (string) --
        • noradSatelliteID (integer) --

          NORAD satellite ID number.

        • satelliteArn (string) --

          ARN of a satellite.

        • satelliteId (string) --

          UUID of a satellite.

    • NextToken (string) --

      A token to resume pagination.