Table of Contents
A low-level client representing AWS Transfer Family:
import boto3
client = boto3.client('transfer')
These are the available methods:
Check if an operation can be paginated.
Instantiates an autoscaling virtual server based on the selected file transfer protocol in AWS. When you make updates to your file transfer protocol-enabled server or when you work with users, use the service-generated ServerId property that is assigned to the newly created server.
See also: AWS API Documentation
Request Syntax
response = client.create_server(
Certificate='string',
EndpointDetails={
'AddressAllocationIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcEndpointId': 'string',
'VpcId': 'string'
},
EndpointType='PUBLIC'|'VPC'|'VPC_ENDPOINT',
HostKey='string',
IdentityProviderDetails={
'Url': 'string',
'InvocationRole': 'string'
},
IdentityProviderType='SERVICE_MANAGED'|'API_GATEWAY',
LoggingRole='string',
Protocols=[
'SFTP'|'FTP'|'FTPS',
],
SecurityPolicyName='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
The Amazon Resource Name (ARN) of the AWS Certificate Manager (ACM) certificate. Required when Protocols is set to FTPS .
To request a new public certificate, see Request a public certificate in the AWS Certificate Manager User Guide .
To import an existing certificate into ACM, see Importing certificates into ACM in the AWS Certificate Manager User Guide .
To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the AWS Certificate Manager User Guide .
Certificates with the following cryptographic algorithms and key sizes are supported:
Note
The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.
The virtual private cloud (VPC) endpoint settings that are configured for your file transfer protocol-enabled server. When you host your endpoint within your VPC, you can make it accessible only to resources within your VPC, or you can attach Elastic IPs and make it accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.
A list of address allocation IDs that are required to attach an Elastic IP address to your file transfer protocol-enabled server's endpoint. This is only valid in the UpdateServer API.
Note
This property can only be use when EndpointType is set to VPC .
A list of subnet IDs that are required to host your file transfer protocol-enabled server endpoint in your VPC.
Note
This property can only be used when EndpointType is set to VPC .
The ID of the VPC endpoint.
Note
This property can only be used when EndpointType is set to VPC_ENDPOINT .
The VPC ID of the VPC in which a file transfer protocol-enabled server's endpoint will be hosted.
Note
This property can only be used when EndpointType is set to VPC .
The type of VPC endpoint that you want your file transfer protocol-enabled server to connect to. You can choose to connect to the public internet or a VPC endpoint. With a VPC endpoint, you can restrict access to your server and resources only within your VPC.
Note
It is recommended that you use VPC as the EndpointType . With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT .
The RSA private key as generated by the ssh-keygen -N "" -m PEM -f my-new-server-key command.
Warning
If you aren't planning to migrate existing users from an existing SFTP-enabled server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.
For more information, see Change the host key for your SFTP-enabled server in the AWS Transfer Family User Guide .
Required when IdentityProviderType is set to API_GATEWAY . Accepts an array containing all of the information required to call a customer-supplied authentication API, including the API Gateway URL. Not required when IdentityProviderType is set to SERVICE_MANAGED .
Provides the location of the service endpoint used to authenticate users.
Provides the type of InvocationRole used to authenticate the user account.
Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:
Note
If you select FTPS , you must choose a certificate stored in AWS Certificate Manager (ACM) which will be used to identify your file transfer protocol-enabled server when clients connect to it over FTPS.
If Protocol includes either FTP or FTPS , then the EndpointType must be VPC and the IdentityProviderType must be API_GATEWAY .
If Protocol includes FTP , then AddressAllocationIds cannot be associated.
If Protocol is set only to SFTP , the EndpointType can be set to PUBLIC and the IdentityProviderType can be set to SERVICE_MANAGED .
Key-value pairs that can be used to group and search for file transfer protocol-enabled servers.
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
The name assigned to the tag that you create.
Contains one or more values that you assigned to the key name you create.
dict
Response Syntax
{
'ServerId': 'string'
}
Response Structure
(dict) --
ServerId (string) --
The service-assigned ID of the file transfer protocol-enabled server that is created.
Exceptions
Creates a user and associates them with an existing file transfer protocol-enabled server. You can only create and associate users with servers that have the IdentityProviderType set to SERVICE_MANAGED . Using parameters for CreateUser , you can specify the user name, set the home directory, store the user's public key, and assign the user's AWS Identity and Access Management (IAM) role. You can also optionally add a scope-down policy, and assign metadata with tags that can be used to group and search for users.
See also: AWS API Documentation
Request Syntax
response = client.create_user(
HomeDirectory='string',
HomeDirectoryType='PATH'|'LOGICAL',
HomeDirectoryMappings=[
{
'Entry': 'string',
'Target': 'string'
},
],
Policy='string',
Role='string',
ServerId='string',
SshPublicKeyBody='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
UserName='string'
)
The landing directory (folder) for a user when they log in to the file transfer protocol-enabled server using the client.
An example is * your-Amazon-S3-bucket-name>/home/username * .
Logical directory mappings that specify what Amazon S3 paths and keys should be visible to your user and how you want to make them visible. You will need to specify the "Entry " and "Target " pair, where Entry shows how the path is made visible and Target is the actual Amazon S3 path. If you only specify a target, it will be displayed as is. You will need to also make sure that your IAM role provides access to paths in Target . The following is an example.
'[ "/bucket2/documentation", { "Entry": "your-personal-report.pdf", "Target": "/bucket3/customized-reports/${transfer:UserName}.pdf" } ]'
In most cases, you can use this value instead of the scope-down policy to lock your user down to the designated home directory ("chroot"). To do this, you can set Entry to '/' and set Target to the HomeDirectory parameter value.
Note
If the target of a logical directory entry does not exist in Amazon S3, the entry will be ignored. As a workaround, you can use the Amazon S3 API to create 0 byte objects as place holders for your directory. If using the CLI, use the s3api call instead of s3 so you can use the put-object operation. For example, you use the following: aws s3api put-object --bucket bucketname --key path/to/folder/ . Make sure that the end of the key name ends in a '/' for it to be considered a folder.
Represents an object that contains entries and targets for HomeDirectoryMappings .
Represents an entry and a target for HomeDirectoryMappings .
Represents the map target that is used in a HomeDirectorymapEntry .
A scope-down policy for your user so you can use the same IAM role across multiple users. This policy scopes down user access to portions of their Amazon S3 bucket. Variables that you can use inside this policy include ${Transfer:UserName} , ${Transfer:HomeDirectory} , and ${Transfer:HomeBucket} .
Note
For scope-down policies, AWS Transfer Family stores the policy as a JSON blob, instead of the Amazon Resource Name (ARN) of the policy. You save the policy as a JSON blob and pass it in the Policy argument.
For an example of a scope-down policy, see Creating a scope-down policy .
For more information, see AssumeRole in the AWS Security Token Service API Reference .
[REQUIRED]
The IAM role that controls your users' access to your Amazon S3 bucket. The policies attached to this role will determine the level of access you want to provide your users when transferring files into and out of your Amazon S3 bucket or buckets. The IAM role should also contain a trust relationship that allows the file transfer protocol-enabled server to access your resources when servicing your users' transfer requests.
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server instance. This is the specific server that you added your user to.
Key-value pairs that can be used to group and search for users. Tags are metadata attached to users for any purpose.
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
The name assigned to the tag that you create.
Contains one or more values that you assigned to the key name you create.
[REQUIRED]
A unique string that identifies a user and is associated with a file transfer protocol-enabled server as specified by the ServerId . This user name must be a minimum of 3 and a maximum of 100 characters long. The following are valid characters: a-z, A-Z, 0-9, underscore '_', hyphen '-', period '.', and at sign '@'. The user name can't start with a hyphen, period, and at sign.
dict
Response Syntax
{
'ServerId': 'string',
'UserName': 'string'
}
Response Structure
(dict) --
ServerId (string) --
The ID of the file transfer protocol-enabled server that the user is attached to.
UserName (string) --
A unique string that identifies a user account associated with a file transfer protocol-enabled server.
Exceptions
Deletes the file transfer protocol-enabled server that you specify.
No response returns from this operation.
See also: AWS API Documentation
Request Syntax
response = client.delete_server(
ServerId='string'
)
[REQUIRED]
A unique system-assigned identifier for a file transfer protocol-enabled server instance.
Exceptions
Deletes a user's Secure Shell (SSH) public key.
No response is returned from this operation.
See also: AWS API Documentation
Request Syntax
response = client.delete_ssh_public_key(
ServerId='string',
SshPublicKeyId='string',
UserName='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server instance that has the user assigned to it.
[REQUIRED]
A unique identifier used to reference your user's specific SSH key.
[REQUIRED]
A unique string that identifies a user whose public key is being deleted.
None
Exceptions
Deletes the user belonging to a file transfer protocol-enabled server you specify.
No response returns from this operation.
Note
When you delete a user from a server, the user's information is lost.
See also: AWS API Documentation
Request Syntax
response = client.delete_user(
ServerId='string',
UserName='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server instance that has the user assigned to it.
[REQUIRED]
A unique string that identifies a user that is being deleted from a file transfer protocol-enabled server.
None
Exceptions
Describes the security policy that is attached to your file transfer protocol-enabled server. The response contains a description of the security policy's properties. For more information about security policies, see Working with security policies .
See also: AWS API Documentation
Request Syntax
response = client.describe_security_policy(
SecurityPolicyName='string'
)
[REQUIRED]
Specifies the name of the security policy that is attached to the server.
{
'SecurityPolicy': {
'Fips': True|False,
'SecurityPolicyName': 'string',
'SshCiphers': [
'string',
],
'SshKexs': [
'string',
],
'SshMacs': [
'string',
],
'TlsCiphers': [
'string',
]
}
}
Response Structure
An array containing the properties of the security policy.
Specifies whether this policy enables Federal Information Processing Standards (FIPS).
Specifies the name of the security policy that is attached to the server.
Specifies the enabled Secure Shell (SSH) cipher encryption algorithms in the security policy that is attached to the server.
Specifies the enabled SSH key exchange (KEX) encryption algorithms in the security policy that is attached to the server.
Specifies the enabled SSH message authentication code (MAC) encryption algorithms in the security policy that is attached to the server.
Specifies the enabled Transport Layer Security (TLS) cipher encryption algorithms in the security policy that is attached to the server.
Exceptions
Describes a file transfer protocol-enabled server that you specify by passing the ServerId parameter.
The response contains a description of a server's properties. When you set EndpointType to VPC, the response will contain the EndpointDetails .
See also: AWS API Documentation
Request Syntax
response = client.describe_server(
ServerId='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server.
{
'Server': {
'Arn': 'string',
'Certificate': 'string',
'EndpointDetails': {
'AddressAllocationIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcEndpointId': 'string',
'VpcId': 'string'
},
'EndpointType': 'PUBLIC'|'VPC'|'VPC_ENDPOINT',
'HostKeyFingerprint': 'string',
'IdentityProviderDetails': {
'Url': 'string',
'InvocationRole': 'string'
},
'IdentityProviderType': 'SERVICE_MANAGED'|'API_GATEWAY',
'LoggingRole': 'string',
'Protocols': [
'SFTP'|'FTP'|'FTPS',
],
'SecurityPolicyName': 'string',
'ServerId': 'string',
'State': 'OFFLINE'|'ONLINE'|'STARTING'|'STOPPING'|'START_FAILED'|'STOP_FAILED',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'UserCount': 123
}
}
Response Structure
An array containing the properties of a file transfer protocol-enabled server with the ServerID you specified.
Specifies the unique Amazon Resource Name (ARN) of the file transfer protocol-enabled server.
Specifies the ARN of the AWS Certificate Manager (ACM) certificate. Required when Protocols is set to FTPS .
Specifies the virtual private cloud (VPC) endpoint settings that you configured for your file transfer protocol-enabled server.
A list of address allocation IDs that are required to attach an Elastic IP address to your file transfer protocol-enabled server's endpoint. This is only valid in the UpdateServer API.
Note
This property can only be use when EndpointType is set to VPC .
A list of subnet IDs that are required to host your file transfer protocol-enabled server endpoint in your VPC.
Note
This property can only be used when EndpointType is set to VPC .
The ID of the VPC endpoint.
Note
This property can only be used when EndpointType is set to VPC_ENDPOINT .
The VPC ID of the VPC in which a file transfer protocol-enabled server's endpoint will be hosted.
Note
This property can only be used when EndpointType is set to VPC .
Defines the type of endpoint that your file transfer protocol-enabled server is connected to. If your server is connected to a VPC endpoint, your server isn't accessible over the public internet.
Specifies the Base64-encoded SHA256 fingerprint of the server's host key. This value is equivalent to the output of the ssh-keygen -l -f my-new-server-key command.
Specifies information to call a customer-supplied authentication API. This field is not populated when the IdentityProviderType of a file transfer protocol-enabled server is SERVICE_MANAGED .
Provides the location of the service endpoint used to authenticate users.
Provides the type of InvocationRole used to authenticate the user account.
Specifies the mode of authentication method enabled for this service. A value of SERVICE_MANAGED means that you are using this file transfer protocol-enabled server to store and access user credentials within the service. A value of API_GATEWAY indicates that you have integrated an API Gateway endpoint that will be invoked for authenticating your user into the service.
Specifies the AWS Identity and Access Management (IAM) role that allows a file transfer protocol-enabled server to turn on Amazon CloudWatch logging for Amazon S3 events. When set, user activity can be viewed in your CloudWatch logs.
Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:
Specifies the name of the security policy that is attached to the server.
Specifies the unique system-assigned identifier for a file transfer protocol-enabled server that you instantiate.
Specifies the condition of a file transfer protocol-enabled server for the server that was described. A value of ONLINE indicates that the server can accept jobs and transfer files. A State value of OFFLINE means that the server cannot perform file transfer operations.
The states of STARTING and STOPPING indicate that the server is in an intermediate state, either not fully able to respond, or not fully offline. The values of START_FAILED or STOP_FAILED can indicate an error condition.
Specifies the key-value pairs that you can use to search for and group file transfer protocol-enabled servers that were assigned to the server that was described.
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
The name assigned to the tag that you create.
Contains one or more values that you assigned to the key name you create.
Specifies the number of users that are assigned to a file transfer protocol-enabled server you specified with the ServerId .
Exceptions
Describes the user assigned to the specific file transfer protocol-enabled server, as identified by its ServerId property.
The response from this call returns the properties of the user associated with the ServerId value that was specified.
See also: AWS API Documentation
Request Syntax
response = client.describe_user(
ServerId='string',
UserName='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server that has this user assigned.
[REQUIRED]
The name of the user assigned to one or more file transfer protocol-enabled servers. User names are part of the sign-in credentials to use the AWS Transfer Family service and perform file transfer tasks.
dict
Response Syntax
{
'ServerId': 'string',
'User': {
'Arn': 'string',
'HomeDirectory': 'string',
'HomeDirectoryMappings': [
{
'Entry': 'string',
'Target': 'string'
},
],
'HomeDirectoryType': 'PATH'|'LOGICAL',
'Policy': 'string',
'Role': 'string',
'SshPublicKeys': [
{
'DateImported': datetime(2015, 1, 1),
'SshPublicKeyBody': 'string',
'SshPublicKeyId': 'string'
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'UserName': 'string'
}
}
Response Structure
(dict) --
ServerId (string) --
A system-assigned unique identifier for a file transfer protocol-enabled server that has this user assigned.
User (dict) --
An array containing the properties of the user account for the ServerID value that you specified.
Arn (string) --
Specifies the unique Amazon Resource Name (ARN) for the user that was requested to be described.
HomeDirectory (string) --
Specifies the landing directory (or folder), which is the location that files are written to or read from in an Amazon S3 bucket, for the described user. An example is * your-Amazon-S3-bucket-name>/home/username * .
HomeDirectoryMappings (list) --
Specifies the logical directory mappings that specify what Amazon S3 paths and keys should be visible to your user and how you want to make them visible. You will need to specify the "Entry " and "Target " pair, where Entry shows how the path is made visible and Target is the actual Amazon S3 path. If you only specify a target, it will be displayed as is. You will need to also make sure that your AWS Identity and Access Management (IAM) role provides access to paths in Target .
In most cases, you can use this value instead of the scope-down policy to lock your user down to the designated home directory ("chroot"). To do this, you can set Entry to '/' and set Target to the HomeDirectory parameter value.
(dict) --
Represents an object that contains entries and targets for HomeDirectoryMappings .
Entry (string) --
Represents an entry and a target for HomeDirectoryMappings .
Target (string) --
Represents the map target that is used in a HomeDirectorymapEntry .
HomeDirectoryType (string) --
Specifies the type of landing directory (folder) you mapped for your users to see when they log into the file transfer protocol-enabled server. If you set it to PATH , the user will see the absolute Amazon S3 bucket paths as is in their file transfer protocol clients. If you set it LOGICAL , you will need to provide mappings in the HomeDirectoryMappings for how you want to make Amazon S3 paths visible to your users.
Policy (string) --
Specifies the name of the policy in use for the described user.
Role (string) --
Specifies the IAM role that controls your users' access to your Amazon S3 bucket. The policies attached to this role will determine the level of access you want to provide your users when transferring files into and out of your Amazon S3 bucket or buckets. The IAM role should also contain a trust relationship that allows a file transfer protocol-enabled server to access your resources when servicing your users' transfer requests.
SshPublicKeys (list) --
Specifies the public key portion of the Secure Shell (SSH) keys stored for the described user.
(dict) --
Provides information about the public Secure Shell (SSH) key that is associated with a user account for the specific file transfer protocol-enabled server (as identified by ServerId ). The information returned includes the date the key was imported, the public key contents, and the public key ID. A user can store more than one SSH public key associated with their user name on a specific server.
DateImported (datetime) --
Specifies the date that the public key was added to the user account.
SshPublicKeyBody (string) --
Specifies the content of the SSH public key as specified by the PublicKeyId .
SshPublicKeyId (string) --
Specifies the SshPublicKeyId parameter contains the identifier of the public key.
Tags (list) --
Specifies the key-value pairs for the user requested. Tag can be used to search for and group users for a variety of purposes.
(dict) --
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
Key (string) --
The name assigned to the tag that you create.
Value (string) --
Contains one or more values that you assigned to the key name you create.
UserName (string) --
Specifies the name of the user that was requested to be described. User names are used for authentication purposes. This is the string that will be used by your user when they log in to your file transfer protocol-enabled server.
Exceptions
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Returns an object that can wait for some condition.
Adds a Secure Shell (SSH) public key to a user account identified by a UserName value assigned to the specific file transfer protocol-enabled server, identified by ServerId .
The response returns the UserName value, the ServerId value, and the name of the SshPublicKeyId .
See also: AWS API Documentation
Request Syntax
response = client.import_ssh_public_key(
ServerId='string',
SshPublicKeyBody='string',
UserName='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server.
[REQUIRED]
The public key portion of an SSH key pair.
[REQUIRED]
The name of the user account that is assigned to one or more file transfer protocol-enabled servers.
dict
Response Syntax
{
'ServerId': 'string',
'SshPublicKeyId': 'string',
'UserName': 'string'
}
Response Structure
(dict) --
Identifies the user, the file transfer protocol-enabled server they belong to, and the identifier of the SSH public key associated with that user. A user can have more than one key on each server that they are associated with.
ServerId (string) --
A system-assigned unique identifier for a file transfer protocol-enabled server.
SshPublicKeyId (string) --
The name given to a public key by the system that was imported.
UserName (string) --
A user name assigned to the ServerID value that you specified.
Exceptions
Lists the security policies that are attached to your file transfer protocol-enabled servers.
See also: AWS API Documentation
Request Syntax
response = client.list_security_policies(
MaxResults=123,
NextToken='string'
)
dict
Response Syntax
{
'NextToken': 'string',
'SecurityPolicyNames': [
'string',
]
}
Response Structure
(dict) --
NextToken (string) --
When you can get additional results from the ListSecurityPolicies operation, a NextToken parameter is returned in the output. In a following command, you can pass in the NextToken parameter to continue listing security policies.
SecurityPolicyNames (list) --
An array of security policies that were listed.
Exceptions
Lists the file transfer protocol-enabled servers that are associated with your AWS account.
See also: AWS API Documentation
Request Syntax
response = client.list_servers(
MaxResults=123,
NextToken='string'
)
dict
Response Syntax
{
'NextToken': 'string',
'Servers': [
{
'Arn': 'string',
'IdentityProviderType': 'SERVICE_MANAGED'|'API_GATEWAY',
'EndpointType': 'PUBLIC'|'VPC'|'VPC_ENDPOINT',
'LoggingRole': 'string',
'ServerId': 'string',
'State': 'OFFLINE'|'ONLINE'|'STARTING'|'STOPPING'|'START_FAILED'|'STOP_FAILED',
'UserCount': 123
},
]
}
Response Structure
(dict) --
NextToken (string) --
When you can get additional results from the ListServers operation, a NextToken parameter is returned in the output. In a following command, you can pass in the NextToken parameter to continue listing additional file transfer protocol-enabled servers.
Servers (list) --
An array of file transfer protocol-enabled servers that were listed.
(dict) --
Returns properties of a file transfer protocol-enabled server that was specified.
Arn (string) --
Specifies the unique Amazon Resource Name (ARN) for a file transfer protocol-enabled server to be listed.
IdentityProviderType (string) --
Specifies the authentication method used to validate a user for a file transfer protocol-enabled server that was specified. This can include Secure Shell (SSH), user name and password combinations, or your own custom authentication method. Valid values include SERVICE_MANAGED or API_GATEWAY .
EndpointType (string) --
Specifies the type of VPC endpoint that your file transfer protocol-enabled server is connected to. If your server is connected to a VPC endpoint, your server isn't accessible over the public internet.
LoggingRole (string) --
Specifies the AWS Identity and Access Management (IAM) role that allows a file transfer protocol-enabled server to turn on Amazon CloudWatch logging.
ServerId (string) --
Specifies the unique system assigned identifier for a file transfer protocol-enabled servers that were listed.
State (string) --
Specifies the condition of a file transfer protocol-enabled server for the server that was described. A value of ONLINE indicates that the server can accept jobs and transfer files. A State value of OFFLINE means that the server cannot perform file transfer operations.
The states of STARTING and STOPPING indicate that the server is in an intermediate state, either not fully able to respond, or not fully offline. The values of START_FAILED or STOP_FAILED can indicate an error condition.
UserCount (integer) --
Specifies the number of users that are assigned to a file transfer protocol-enabled server you specified with the ServerId .
Exceptions
Lists all of the tags associated with the Amazon Resource Number (ARN) you specify. The resource can be a user, server, or role.
See also: AWS API Documentation
Request Syntax
response = client.list_tags_for_resource(
Arn='string',
MaxResults=123,
NextToken='string'
)
[REQUIRED]
Requests the tags associated with a particular Amazon Resource Name (ARN). An ARN is an identifier for a specific AWS resource, such as a server, user, or role.
dict
Response Syntax
{
'Arn': 'string',
'NextToken': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
Response Structure
(dict) --
Arn (string) --
The ARN you specified to list the tags of.
NextToken (string) --
When you can get additional results from the ListTagsForResource call, a NextToken parameter is returned in the output. You can then pass in a subsequent command to the NextToken parameter to continue listing additional tags.
Tags (list) --
Key-value pairs that are assigned to a resource, usually for the purpose of grouping and searching for items. Tags are metadata that you define.
(dict) --
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
Key (string) --
The name assigned to the tag that you create.
Value (string) --
Contains one or more values that you assigned to the key name you create.
Exceptions
Lists the users for a file transfer protocol-enabled server that you specify by passing the ServerId parameter.
See also: AWS API Documentation
Request Syntax
response = client.list_users(
MaxResults=123,
NextToken='string',
ServerId='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server that has users assigned to it.
dict
Response Syntax
{
'NextToken': 'string',
'ServerId': 'string',
'Users': [
{
'Arn': 'string',
'HomeDirectory': 'string',
'HomeDirectoryType': 'PATH'|'LOGICAL',
'Role': 'string',
'SshPublicKeyCount': 123,
'UserName': 'string'
},
]
}
Response Structure
(dict) --
NextToken (string) --
When you can get additional results from the ListUsers call, a NextToken parameter is returned in the output. You can then pass in a subsequent command to the NextToken parameter to continue listing additional users.
ServerId (string) --
A system-assigned unique identifier for a file transfer protocol-enabled server that the users are assigned to.
Users (list) --
Returns the user accounts and their properties for the ServerId value that you specify.
(dict) --
Returns properties of the user that you specify.
Arn (string) --
Provides the unique Amazon Resource Name (ARN) for the user that you want to learn about.
HomeDirectory (string) --
Specifies the location that files are written to or read from an Amazon S3 bucket for the user you specify by their ARN.
HomeDirectoryType (string) --
Specifies the type of landing directory (folder) you mapped for your users' home directory. If you set it to PATH , the user will see the absolute Amazon S3 bucket paths as is in their file transfer protocol clients. If you set it LOGICAL , you will need to provide mappings in the HomeDirectoryMappings for how you want to make Amazon S3 paths visible to your users.
Role (string) --
Specifies the role that is in use by this user. A role is an AWS Identity and Access Management (IAM) entity that, in this case, allows a file transfer protocol-enabled server to act on a user's behalf. It allows the server to inherit the trust relationship that enables that user to perform file operations to their Amazon S3 bucket.
SshPublicKeyCount (integer) --
Specifies the number of SSH public keys stored for the user you specified.
UserName (string) --
Specifies the name of the user whose ARN was specified. User names are used for authentication purposes.
Exceptions
Changes the state of a file transfer protocol-enabled server from OFFLINE to ONLINE . It has no impact on a server that is already ONLINE . An ONLINE server can accept and process file transfer jobs.
The state of STARTING indicates that the server is in an intermediate state, either not fully able to respond, or not fully online. The values of START_FAILED can indicate an error condition.
No response is returned from this call.
See also: AWS API Documentation
Request Syntax
response = client.start_server(
ServerId='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server that you start.
Exceptions
Changes the state of a file transfer protocol-enabled server from ONLINE to OFFLINE . An OFFLINE server cannot accept and process file transfer jobs. Information tied to your server, such as server and user properties, are not affected by stopping your server. Stopping the server will not reduce or impact your file transfer protocol endpoint billing.
The state of STOPPING indicates that the server is in an intermediate state, either not fully able to respond, or not fully offline. The values of STOP_FAILED can indicate an error condition.
No response is returned from this call.
See also: AWS API Documentation
Request Syntax
response = client.stop_server(
ServerId='string'
)
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server that you stopped.
Exceptions
Attaches a key-value pair to a resource, as identified by its Amazon Resource Name (ARN). Resources are users, servers, roles, and other entities.
There is no response returned from this call.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
Arn='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
An Amazon Resource Name (ARN) for a specific AWS resource, such as a server, user, or role.
[REQUIRED]
Key-value pairs assigned to ARNs that you can use to group and search for resources by type. You can attach this metadata to user accounts for any purpose.
Creates a key-value pair for a specific resource. Tags are metadata that you can use to search for and group a resource for various purposes. You can apply tags to servers, users, and roles. A tag key can take more than one value. For example, to group servers for accounting purposes, you might create a tag called Group and assign the values Research and Accounting to that group.
The name assigned to the tag that you create.
Contains one or more values that you assigned to the key name you create.
None
Exceptions
If the IdentityProviderType of a file transfer protocol-enabled server is API_Gateway , tests whether your API Gateway is set up successfully. We highly recommend that you call this operation to test your authentication method as soon as you create your server. By doing so, you can troubleshoot issues with the API Gateway integration to ensure that your users can successfully use the service.
See also: AWS API Documentation
Request Syntax
response = client.test_identity_provider(
ServerId='string',
ServerProtocol='SFTP'|'FTP'|'FTPS',
SourceIp='string',
UserName='string',
UserPassword='string'
)
[REQUIRED]
A system-assigned identifier for a specific file transfer protocol-enabled server. That server's user authentication method is tested with a user name and password.
The type of file transfer protocol to be tested.
The available protocols are:
[REQUIRED]
The name of the user account to be tested.
dict
Response Syntax
{
'Response': 'string',
'StatusCode': 123,
'Message': 'string',
'Url': 'string'
}
Response Structure
(dict) --
Response (string) --
The response that is returned from your API Gateway.
StatusCode (integer) --
The HTTP status code that is the response from your API Gateway.
Message (string) --
A message that indicates whether the test was successful or not.
Url (string) --
The endpoint of the service used to authenticate a user.
Exceptions
Detaches a key-value pair from a resource, as identified by its Amazon Resource Name (ARN). Resources are users, servers, roles, and other entities.
No response is returned from this call.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
Arn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The value of the resource that will have the tag removed. An Amazon Resource Name (ARN) is an identifier for a specific AWS resource, such as a server, user, or role.
[REQUIRED]
TagKeys are key-value pairs assigned to ARNs that can be used to group and search for resources by type. This metadata can be attached to resources for any purpose.
None
Exceptions
Updates the file transfer protocol-enabled server's properties after that server has been created.
The UpdateServer call returns the ServerId of the server you updated.
See also: AWS API Documentation
Request Syntax
response = client.update_server(
Certificate='string',
EndpointDetails={
'AddressAllocationIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcEndpointId': 'string',
'VpcId': 'string'
},
EndpointType='PUBLIC'|'VPC'|'VPC_ENDPOINT',
HostKey='string',
IdentityProviderDetails={
'Url': 'string',
'InvocationRole': 'string'
},
LoggingRole='string',
Protocols=[
'SFTP'|'FTP'|'FTPS',
],
SecurityPolicyName='string',
ServerId='string'
)
The Amazon Resource Name (ARN) of the AWS Certificate Manager (ACM) certificate. Required when Protocols is set to FTPS .
To request a new public certificate, see Request a public certificate in the AWS Certificate Manager User Guide .
To import an existing certificate into ACM, see Importing certificates into ACM in the AWS Certificate Manager User Guide .
To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the AWS Certificate Manager User Guide .
Certificates with the following cryptographic algorithms and key sizes are supported:
Note
The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.
The virtual private cloud (VPC) endpoint settings that are configured for your file transfer protocol-enabled server. With a VPC endpoint, you can restrict access to your server to resources only within your VPC. To control incoming internet traffic, you will need to associate one or more Elastic IP addresses with your server's endpoint.
A list of address allocation IDs that are required to attach an Elastic IP address to your file transfer protocol-enabled server's endpoint. This is only valid in the UpdateServer API.
Note
This property can only be use when EndpointType is set to VPC .
A list of subnet IDs that are required to host your file transfer protocol-enabled server endpoint in your VPC.
Note
This property can only be used when EndpointType is set to VPC .
The ID of the VPC endpoint.
Note
This property can only be used when EndpointType is set to VPC_ENDPOINT .
The VPC ID of the VPC in which a file transfer protocol-enabled server's endpoint will be hosted.
Note
This property can only be used when EndpointType is set to VPC .
The type of endpoint that you want your file transfer protocol-enabled server to connect to. You can choose to connect to the public internet or a VPC endpoint. With a VPC endpoint, you can restrict access to your server and resources only within your VPC.
Note
It is recommended that you use VPC as the EndpointType . With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT .
The RSA private key as generated by ssh-keygen -N "" -m PEM -f my-new-server-key .
Warning
If you aren't planning to migrate existing users from an existing file transfer protocol-enabled server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.
For more information, see Change the host key for your SFTP-enabled server in the AWS Transfer Family User Guide .
An array containing all of the information required to call a customer's authentication API method.
Provides the location of the service endpoint used to authenticate users.
Provides the type of InvocationRole used to authenticate the user account.
Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:
Note
If you select FTPS , you must choose a certificate stored in AWS Certificate Manager (ACM) which will be used to identify your server when clients connect to it over FTPS.
If Protocol includes either FTP or FTPS , then the EndpointType must be VPC and the IdentityProviderType must be API_GATEWAY .
If Protocol includes FTP , then AddressAllocationIds cannot be associated.
If Protocol is set only to SFTP , the EndpointType can be set to PUBLIC and the IdentityProviderType can be set to SERVICE_MANAGED .
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server instance that the user account is assigned to.
dict
Response Syntax
{
'ServerId': 'string'
}
Response Structure
(dict) --
ServerId (string) --
A system-assigned unique identifier for a file transfer protocol-enabled server that the user account is assigned to.
Exceptions
Assigns new properties to a user. Parameters you pass modify any or all of the following: the home directory, role, and policy for the UserName and ServerId you specify.
The response returns the ServerId and the UserName for the updated user.
See also: AWS API Documentation
Request Syntax
response = client.update_user(
HomeDirectory='string',
HomeDirectoryType='PATH'|'LOGICAL',
HomeDirectoryMappings=[
{
'Entry': 'string',
'Target': 'string'
},
],
Policy='string',
Role='string',
ServerId='string',
UserName='string'
)
Specifies the landing directory (folder) for a user when they log in to the file transfer protocol-enabled server using their file transfer protocol client.
An example is your-Amazon-S3-bucket-name>/home/username .
Logical directory mappings that specify what Amazon S3 paths and keys should be visible to your user and how you want to make them visible. You will need to specify the "Entry " and "Target " pair, where Entry shows how the path is made visible and Target is the actual Amazon S3 path. If you only specify a target, it will be displayed as is. You will need to also make sure that your IAM role provides access to paths in Target . The following is an example.
'[ "/bucket2/documentation", { "Entry": "your-personal-report.pdf", "Target": "/bucket3/customized-reports/${transfer:UserName}.pdf" } ]'
In most cases, you can use this value instead of the scope-down policy to lock your user down to the designated home directory ("chroot"). To do this, you can set Entry to '/' and set Target to the HomeDirectory parameter value.
Note
If the target of a logical directory entry does not exist in Amazon S3, the entry will be ignored. As a workaround, you can use the Amazon S3 API to create 0 byte objects as place holders for your directory. If using the CLI, use the s3api call instead of s3 so you can use the put-object operation. For example, you use the following: aws s3api put-object --bucket bucketname --key path/to/folder/ . Make sure that the end of the key name ends in a / for it to be considered a folder.
Represents an object that contains entries and targets for HomeDirectoryMappings .
Represents an entry and a target for HomeDirectoryMappings .
Represents the map target that is used in a HomeDirectorymapEntry .
Allows you to supply a scope-down policy for your user so you can use the same IAM role across multiple users. The policy scopes down user access to portions of your Amazon S3 bucket. Variables you can use inside this policy include ${Transfer:UserName} , ${Transfer:HomeDirectory} , and ${Transfer:HomeBucket} .
Note
For scope-down policies, AWS Transfer Family stores the policy as a JSON blob, instead of the Amazon Resource Name (ARN) of the policy. You save the policy as a JSON blob and pass it in the Policy argument.
For an example of a scope-down policy, see Creating a scope-down policy .
For more information, see AssumeRole in the AWS Security Token Service API Reference .
[REQUIRED]
A system-assigned unique identifier for a file transfer protocol-enabled server instance that the user account is assigned to.
[REQUIRED]
A unique string that identifies a user and is associated with a file transfer protocol-enabled server as specified by the ServerId . This user name must be a minimum of 3 and a maximum of 100 characters long. The following are valid characters: a-z, A-Z, 0-9, underscore '_', hyphen '-', period '.', and at sign '@'. The user name can't start with a hyphen, period, and at sign.
dict
Response Syntax
{
'ServerId': 'string',
'UserName': 'string'
}
Response Structure
(dict) --
UpdateUserResponse returns the user name and file transfer protocol-enabled server identifier for the request to update a user's properties.
ServerId (string) --
A system-assigned unique identifier for a file transfer protocol-enabled server instance that the user account is assigned to.
UserName (string) --
The unique identifier for a user that is assigned to a file transfer protocol-enabled server instance that was specified in the request.
Exceptions
The available paginators are:
paginator = client.get_paginator('list_servers')
Creates an iterator that will paginate through responses from Transfer.Client.list_servers().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'Servers': [
{
'Arn': 'string',
'IdentityProviderType': 'SERVICE_MANAGED'|'API_GATEWAY',
'EndpointType': 'PUBLIC'|'VPC'|'VPC_ENDPOINT',
'LoggingRole': 'string',
'ServerId': 'string',
'State': 'OFFLINE'|'ONLINE'|'STARTING'|'STOPPING'|'START_FAILED'|'STOP_FAILED',
'UserCount': 123
},
]
}
Response Structure
An array of file transfer protocol-enabled servers that were listed.
Returns properties of a file transfer protocol-enabled server that was specified.
Specifies the unique Amazon Resource Name (ARN) for a file transfer protocol-enabled server to be listed.
Specifies the authentication method used to validate a user for a file transfer protocol-enabled server that was specified. This can include Secure Shell (SSH), user name and password combinations, or your own custom authentication method. Valid values include SERVICE_MANAGED or API_GATEWAY .
Specifies the type of VPC endpoint that your file transfer protocol-enabled server is connected to. If your server is connected to a VPC endpoint, your server isn't accessible over the public internet.
Specifies the AWS Identity and Access Management (IAM) role that allows a file transfer protocol-enabled server to turn on Amazon CloudWatch logging.
Specifies the unique system assigned identifier for a file transfer protocol-enabled servers that were listed.
Specifies the condition of a file transfer protocol-enabled server for the server that was described. A value of ONLINE indicates that the server can accept jobs and transfer files. A State value of OFFLINE means that the server cannot perform file transfer operations.
The states of STARTING and STOPPING indicate that the server is in an intermediate state, either not fully able to respond, or not fully offline. The values of START_FAILED or STOP_FAILED can indicate an error condition.
Specifies the number of users that are assigned to a file transfer protocol-enabled server you specified with the ServerId .