Table of Contents
A low-level client representing Amazon Detective
Detective uses machine learning and purpose-built visualizations to help you analyze and investigate security issues across your Amazon Web Services (AWS) workloads. Detective automatically extracts time-based events such as login attempts, API calls, and network traffic from AWS CloudTrail and Amazon Virtual Private Cloud (Amazon VPC) flow logs. It also extracts findings detected by Amazon GuardDuty.
The Detective API primarily supports the creation and management of behavior graphs. A behavior graph contains the extracted data from a set of member accounts, and is created and managed by an administrator account.
Every behavior graph is specific to a Region. You can only use the API to manage graphs that belong to the Region that is associated with the currently selected endpoint.
A Detective administrator account can use the Detective API to do the following:
A member account can use the Detective API to do the following:
All API actions are logged as CloudTrail events. See Logging Detective API Calls with CloudTrail .
Note
We replaced the term "master account" with the term "administrator account." An administrator account is used to centrally manage multiple accounts. In the case of Detective, the administrator account manages the accounts in their behavior graph.
import boto3
client = boto3.client('detective')
These are the available methods:
Accepts an invitation for the member account to contribute data to a behavior graph. This operation can only be called by an invited member account.
The request provides the ARN of behavior graph.
The member account status in the graph must be INVITED .
See also: AWS API Documentation
Request Syntax
response = client.accept_invitation(
GraphArn='string'
)
[REQUIRED]
The ARN of the behavior graph that the member account is accepting the invitation for.
The member account status in the behavior graph must be INVITED .
Exceptions
Check if an operation can be paginated.
Creates a new behavior graph for the calling account, and sets that account as the administrator account. This operation is called by the account that is enabling Detective.
Before you try to enable Detective, make sure that your account has been enrolled in Amazon GuardDuty for at least 48 hours. If you do not meet this requirement, you cannot enable Detective. If you do meet the GuardDuty prerequisite, then when you make the request to enable Detective, it checks whether your data volume is within the Detective quota. If it exceeds the quota, then you cannot enable Detective.
The operation also enables Detective for the calling account in the currently selected Region. It returns the ARN of the new behavior graph.
CreateGraph triggers a process to create the corresponding data tables for the new behavior graph.
An account can only be the administrator account for one behavior graph within a Region. If the same account calls CreateGraph with the same administrator account, it always returns the same behavior graph ARN. It does not create a new behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.create_graph(
Tags={
'string': 'string'
}
)
The tags to assign to the new behavior graph. For each tag, you provide the tag key and the tag value.
{
'GraphArn': 'string'
}
Response Structure
The ARN of the new behavior graph.
Exceptions
Sends a request to invite the specified AWS accounts to be member accounts in the behavior graph. This operation can only be called by the administrator account for a behavior graph.
CreateMembers verifies the accounts and then invites the verified accounts. The administrator can optionally specify to not send invitation emails to the member accounts. This would be used when the administrator manages their member accounts centrally.
The request provides the behavior graph ARN and the list of accounts to invite.
The response separates the requested accounts into two lists:
See also: AWS API Documentation
Request Syntax
response = client.create_members(
GraphArn='string',
Message='string',
DisableEmailNotification=True|False,
Accounts=[
{
'AccountId': 'string',
'EmailAddress': 'string'
},
]
)
[REQUIRED]
The ARN of the behavior graph to invite the member accounts to contribute their data to.
[REQUIRED]
The list of AWS accounts to invite to become member accounts in the behavior graph. For each invited account, the account list contains the account identifier and the AWS account root user email address.
An AWS account that is the administrator account of or a member of a behavior graph.
The account identifier of the AWS account.
The AWS account root user email address for the AWS account.
dict
Response Syntax
{
'Members': [
{
'AccountId': 'string',
'EmailAddress': 'string',
'GraphArn': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'Status': 'INVITED'|'VERIFICATION_IN_PROGRESS'|'VERIFICATION_FAILED'|'ENABLED'|'ACCEPTED_BUT_DISABLED',
'DisabledReason': 'VOLUME_TOO_HIGH'|'VOLUME_UNKNOWN',
'InvitedTime': datetime(2015, 1, 1),
'UpdatedTime': datetime(2015, 1, 1),
'PercentOfGraphUtilization': 123.0,
'PercentOfGraphUtilizationUpdatedTime': datetime(2015, 1, 1)
},
],
'UnprocessedAccounts': [
{
'AccountId': 'string',
'Reason': 'string'
},
]
}
Response Structure
(dict) --
Members (list) --
The set of member account invitation requests that Detective was able to process. This includes accounts that are being verified, that failed verification, and that passed verification and are being sent an invitation.
(dict) --
Details about a member account that was invited to contribute to a behavior graph.
AccountId (string) --
The AWS account identifier for the member account.
EmailAddress (string) --
The AWS account root user email address for the member account.
GraphArn (string) --
The ARN of the behavior graph that the member account was invited to.
MasterId (string) --
Deprecated. Instead of MasterId , use AdministratorId .
The AWS account identifier of the administrator account for the behavior graph.
AdministratorId (string) --
The AWS account identifier of the administrator account for the behavior graph.
Status (string) --
The current membership status of the member account. The status can have one of the following values:
Member accounts that declined an invitation or that were removed from the behavior graph are not included.
DisabledReason (string) --
For member accounts with a status of ACCEPTED_BUT_DISABLED , the reason that the member account is not enabled.
The reason can have one of the following values:
InvitedTime (datetime) --
The date and time that Detective sent the invitation to the member account. The value is in milliseconds since the epoch.
UpdatedTime (datetime) --
The date and time that the member account was last updated. The value is in milliseconds since the epoch.
PercentOfGraphUtilization (float) --
The member account data volume as a percentage of the maximum allowed data volume. 0 indicates 0 percent, and 100 indicates 100 percent.
Note that this is not the percentage of the behavior graph data volume.
For example, the data volume for the behavior graph is 80 GB per day. The maximum data volume is 160 GB per day. If the data volume for the member account is 40 GB per day, then PercentOfGraphUtilization is 25. It represents 25% of the maximum allowed data volume.
PercentOfGraphUtilizationUpdatedTime (datetime) --
The date and time when the graph utilization percentage was last updated.
UnprocessedAccounts (list) --
The list of accounts for which Detective was unable to process the invitation request. For each account, the list provides the reason why the request could not be processed. The list includes accounts that are already member accounts in the behavior graph.
(dict) --
A member account that was included in a request but for which the request could not be processed.
AccountId (string) --
The AWS account identifier of the member account that was not processed.
Reason (string) --
The reason that the member account request could not be processed.
Exceptions
Disables the specified behavior graph and queues it to be deleted. This operation removes the graph from each member account's list of behavior graphs.
DeleteGraph can only be called by the administrator account for a behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.delete_graph(
GraphArn='string'
)
[REQUIRED]
The ARN of the behavior graph to disable.
Exceptions
Deletes one or more member accounts from the administrator account's behavior graph. This operation can only be called by a Detective administrator account. That account cannot use DeleteMembers to delete their own account from the behavior graph. To disable a behavior graph, the administrator account uses the DeleteGraph API method.
See also: AWS API Documentation
Request Syntax
response = client.delete_members(
GraphArn='string',
AccountIds=[
'string',
]
)
[REQUIRED]
The ARN of the behavior graph to delete members from.
[REQUIRED]
The list of AWS account identifiers for the member accounts to delete from the behavior graph.
dict
Response Syntax
{
'AccountIds': [
'string',
],
'UnprocessedAccounts': [
{
'AccountId': 'string',
'Reason': 'string'
},
]
}
Response Structure
(dict) --
AccountIds (list) --
The list of AWS account identifiers for the member accounts that Detective successfully deleted from the behavior graph.
UnprocessedAccounts (list) --
The list of member accounts that Detective was not able to delete from the behavior graph. For each member account, provides the reason that the deletion could not be processed.
(dict) --
A member account that was included in a request but for which the request could not be processed.
AccountId (string) --
The AWS account identifier of the member account that was not processed.
Reason (string) --
The reason that the member account request could not be processed.
Exceptions
Removes the member account from the specified behavior graph. This operation can only be called by a member account that has the ENABLED status.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_membership(
GraphArn='string'
)
[REQUIRED]
The ARN of the behavior graph to remove the member account from.
The member account's member status in the behavior graph must be ENABLED .
Exceptions
Generate a presigned url given a client, its method, and arguments
The presigned url
Returns the membership details for specified member accounts for a behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.get_members(
GraphArn='string',
AccountIds=[
'string',
]
)
[REQUIRED]
The ARN of the behavior graph for which to request the member details.
[REQUIRED]
The list of AWS account identifiers for the member account for which to return member details.
You cannot use GetMembers to retrieve information about member accounts that were removed from the behavior graph.
dict
Response Syntax
{
'MemberDetails': [
{
'AccountId': 'string',
'EmailAddress': 'string',
'GraphArn': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'Status': 'INVITED'|'VERIFICATION_IN_PROGRESS'|'VERIFICATION_FAILED'|'ENABLED'|'ACCEPTED_BUT_DISABLED',
'DisabledReason': 'VOLUME_TOO_HIGH'|'VOLUME_UNKNOWN',
'InvitedTime': datetime(2015, 1, 1),
'UpdatedTime': datetime(2015, 1, 1),
'PercentOfGraphUtilization': 123.0,
'PercentOfGraphUtilizationUpdatedTime': datetime(2015, 1, 1)
},
],
'UnprocessedAccounts': [
{
'AccountId': 'string',
'Reason': 'string'
},
]
}
Response Structure
(dict) --
MemberDetails (list) --
The member account details that Detective is returning in response to the request.
(dict) --
Details about a member account that was invited to contribute to a behavior graph.
AccountId (string) --
The AWS account identifier for the member account.
EmailAddress (string) --
The AWS account root user email address for the member account.
GraphArn (string) --
The ARN of the behavior graph that the member account was invited to.
MasterId (string) --
Deprecated. Instead of MasterId , use AdministratorId .
The AWS account identifier of the administrator account for the behavior graph.
AdministratorId (string) --
The AWS account identifier of the administrator account for the behavior graph.
Status (string) --
The current membership status of the member account. The status can have one of the following values:
Member accounts that declined an invitation or that were removed from the behavior graph are not included.
DisabledReason (string) --
For member accounts with a status of ACCEPTED_BUT_DISABLED , the reason that the member account is not enabled.
The reason can have one of the following values:
InvitedTime (datetime) --
The date and time that Detective sent the invitation to the member account. The value is in milliseconds since the epoch.
UpdatedTime (datetime) --
The date and time that the member account was last updated. The value is in milliseconds since the epoch.
PercentOfGraphUtilization (float) --
The member account data volume as a percentage of the maximum allowed data volume. 0 indicates 0 percent, and 100 indicates 100 percent.
Note that this is not the percentage of the behavior graph data volume.
For example, the data volume for the behavior graph is 80 GB per day. The maximum data volume is 160 GB per day. If the data volume for the member account is 40 GB per day, then PercentOfGraphUtilization is 25. It represents 25% of the maximum allowed data volume.
PercentOfGraphUtilizationUpdatedTime (datetime) --
The date and time when the graph utilization percentage was last updated.
UnprocessedAccounts (list) --
The requested member accounts for which Detective was unable to return member details.
For each account, provides the reason why the request could not be processed.
(dict) --
A member account that was included in a request but for which the request could not be processed.
AccountId (string) --
The AWS account identifier of the member account that was not processed.
Reason (string) --
The reason that the member account request could not be processed.
Exceptions
Create a paginator for an operation.
Returns an object that can wait for some condition.
Returns the list of behavior graphs that the calling account is an administrator account of. This operation can only be called by an administrator account.
Because an account can currently only be the administrator of one behavior graph within a Region, the results always contain a single behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.list_graphs(
NextToken='string',
MaxResults=123
)
dict
Response Syntax
{
'GraphList': [
{
'Arn': 'string',
'CreatedTime': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
GraphList (list) --
A list of behavior graphs that the account is an administrator account for.
(dict) --
A behavior graph in Detective.
Arn (string) --
The ARN of the behavior graph.
CreatedTime (datetime) --
The date and time that the behavior graph was created. The value is in milliseconds since the epoch.
NextToken (string) --
If there are more behavior graphs remaining in the results, then this is the pagination token to use to request the next page of behavior graphs.
Exceptions
Retrieves the list of open and accepted behavior graph invitations for the member account. This operation can only be called by a member account.
Open invitations are invitations that the member account has not responded to.
The results do not include behavior graphs for which the member account declined the invitation. The results also do not include behavior graphs that the member account resigned from or was removed from.
See also: AWS API Documentation
Request Syntax
response = client.list_invitations(
NextToken='string',
MaxResults=123
)
dict
Response Syntax
{
'Invitations': [
{
'AccountId': 'string',
'EmailAddress': 'string',
'GraphArn': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'Status': 'INVITED'|'VERIFICATION_IN_PROGRESS'|'VERIFICATION_FAILED'|'ENABLED'|'ACCEPTED_BUT_DISABLED',
'DisabledReason': 'VOLUME_TOO_HIGH'|'VOLUME_UNKNOWN',
'InvitedTime': datetime(2015, 1, 1),
'UpdatedTime': datetime(2015, 1, 1),
'PercentOfGraphUtilization': 123.0,
'PercentOfGraphUtilizationUpdatedTime': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Invitations (list) --
The list of behavior graphs for which the member account has open or accepted invitations.
(dict) --
Details about a member account that was invited to contribute to a behavior graph.
AccountId (string) --
The AWS account identifier for the member account.
EmailAddress (string) --
The AWS account root user email address for the member account.
GraphArn (string) --
The ARN of the behavior graph that the member account was invited to.
MasterId (string) --
Deprecated. Instead of MasterId , use AdministratorId .
The AWS account identifier of the administrator account for the behavior graph.
AdministratorId (string) --
The AWS account identifier of the administrator account for the behavior graph.
Status (string) --
The current membership status of the member account. The status can have one of the following values:
Member accounts that declined an invitation or that were removed from the behavior graph are not included.
DisabledReason (string) --
For member accounts with a status of ACCEPTED_BUT_DISABLED , the reason that the member account is not enabled.
The reason can have one of the following values:
InvitedTime (datetime) --
The date and time that Detective sent the invitation to the member account. The value is in milliseconds since the epoch.
UpdatedTime (datetime) --
The date and time that the member account was last updated. The value is in milliseconds since the epoch.
PercentOfGraphUtilization (float) --
The member account data volume as a percentage of the maximum allowed data volume. 0 indicates 0 percent, and 100 indicates 100 percent.
Note that this is not the percentage of the behavior graph data volume.
For example, the data volume for the behavior graph is 80 GB per day. The maximum data volume is 160 GB per day. If the data volume for the member account is 40 GB per day, then PercentOfGraphUtilization is 25. It represents 25% of the maximum allowed data volume.
PercentOfGraphUtilizationUpdatedTime (datetime) --
The date and time when the graph utilization percentage was last updated.
NextToken (string) --
If there are more behavior graphs remaining in the results, then this is the pagination token to use to request the next page of behavior graphs.
Exceptions
Retrieves the list of member accounts for a behavior graph. Does not return member accounts that were removed from the behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.list_members(
GraphArn='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The ARN of the behavior graph for which to retrieve the list of member accounts.
dict
Response Syntax
{
'MemberDetails': [
{
'AccountId': 'string',
'EmailAddress': 'string',
'GraphArn': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'Status': 'INVITED'|'VERIFICATION_IN_PROGRESS'|'VERIFICATION_FAILED'|'ENABLED'|'ACCEPTED_BUT_DISABLED',
'DisabledReason': 'VOLUME_TOO_HIGH'|'VOLUME_UNKNOWN',
'InvitedTime': datetime(2015, 1, 1),
'UpdatedTime': datetime(2015, 1, 1),
'PercentOfGraphUtilization': 123.0,
'PercentOfGraphUtilizationUpdatedTime': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
MemberDetails (list) --
The list of member accounts in the behavior graph.
The results include member accounts that did not pass verification and member accounts that have not yet accepted the invitation to the behavior graph. The results do not include member accounts that were removed from the behavior graph.
(dict) --
Details about a member account that was invited to contribute to a behavior graph.
AccountId (string) --
The AWS account identifier for the member account.
EmailAddress (string) --
The AWS account root user email address for the member account.
GraphArn (string) --
The ARN of the behavior graph that the member account was invited to.
MasterId (string) --
Deprecated. Instead of MasterId , use AdministratorId .
The AWS account identifier of the administrator account for the behavior graph.
AdministratorId (string) --
The AWS account identifier of the administrator account for the behavior graph.
Status (string) --
The current membership status of the member account. The status can have one of the following values:
Member accounts that declined an invitation or that were removed from the behavior graph are not included.
DisabledReason (string) --
For member accounts with a status of ACCEPTED_BUT_DISABLED , the reason that the member account is not enabled.
The reason can have one of the following values:
InvitedTime (datetime) --
The date and time that Detective sent the invitation to the member account. The value is in milliseconds since the epoch.
UpdatedTime (datetime) --
The date and time that the member account was last updated. The value is in milliseconds since the epoch.
PercentOfGraphUtilization (float) --
The member account data volume as a percentage of the maximum allowed data volume. 0 indicates 0 percent, and 100 indicates 100 percent.
Note that this is not the percentage of the behavior graph data volume.
For example, the data volume for the behavior graph is 80 GB per day. The maximum data volume is 160 GB per day. If the data volume for the member account is 40 GB per day, then PercentOfGraphUtilization is 25. It represents 25% of the maximum allowed data volume.
PercentOfGraphUtilizationUpdatedTime (datetime) --
The date and time when the graph utilization percentage was last updated.
NextToken (string) --
If there are more member accounts remaining in the results, then this is the pagination token to use to request the next page of member accounts.
Exceptions
Returns the tag values that are assigned to a behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.list_tags_for_resource(
ResourceArn='string'
)
[REQUIRED]
The ARN of the behavior graph for which to retrieve the tag values.
{
'Tags': {
'string': 'string'
}
}
Response Structure
The tag values that are assigned to the behavior graph.
Exceptions
Rejects an invitation to contribute the account data to a behavior graph. This operation must be called by a member account that has the INVITED status.
See also: AWS API Documentation
Request Syntax
response = client.reject_invitation(
GraphArn='string'
)
[REQUIRED]
The ARN of the behavior graph to reject the invitation to.
The member account's current member status in the behavior graph must be INVITED .
Exceptions
Sends a request to enable data ingest for a member account that has a status of ACCEPTED_BUT_DISABLED .
For valid member accounts, the status is updated as follows.
See also: AWS API Documentation
Request Syntax
response = client.start_monitoring_member(
GraphArn='string',
AccountId='string'
)
[REQUIRED]
The ARN of the behavior graph.
[REQUIRED]
The account ID of the member account to try to enable.
The account must be an invited member account with a status of ACCEPTED_BUT_DISABLED .
None
Exceptions
Applies tag values to a behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
ResourceArn='string',
Tags={
'string': 'string'
}
)
[REQUIRED]
The ARN of the behavior graph to assign the tags to.
[REQUIRED]
The tag values to assign to the behavior graph.
dict
Response Syntax
{}
Response Structure
Exceptions
Removes tags from a behavior graph.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
ResourceArn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The ARN of the behavior graph to remove the tags from.
[REQUIRED]
The tag keys of the tags to remove from the behavior graph.
dict
Response Syntax
{}
Response Structure
Exceptions
The available paginators are: