MediaConvert

Table of Contents

Client

class MediaConvert.Client

A low-level client representing AWS Elemental MediaConvert AWS Elemental MediaConvert:

import boto3

client = boto3.client('mediaconvert')

These are the available methods:

associate_certificate(**kwargs)

Associates an AWS Certificate Manager (ACM) Amazon Resource Name (ARN) with AWS Elemental MediaConvert.

See also: AWS API Documentation

Request Syntax

response = client.associate_certificate(
    Arn='string'
)
Parameters
Arn (string) -- [REQUIRED] The ARN of the ACM certificate that you want to associate with your MediaConvert resource.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
cancel_job(**kwargs)

Permanently cancel a job. Once you have canceled a job, you can't start it again.

See also: AWS API Documentation

Request Syntax

response = client.cancel_job(
    Id='string'
)
Parameters
Id (string) -- [REQUIRED] The Job ID of the job to be cancelled.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
create_job(**kwargs)

Create a new transcoding job. For information about jobs and job settings, see the User Guide at http://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html

See also: AWS API Documentation

Request Syntax

response = client.create_job(
    AccelerationSettings={
        'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
    },
    BillingTagsSource='QUEUE'|'PRESET'|'JOB_TEMPLATE'|'JOB',
    ClientRequestToken='string',
    HopDestinations=[
        {
            'Priority': 123,
            'Queue': 'string',
            'WaitMinutes': 123
        },
    ],
    JobTemplate='string',
    Priority=123,
    Queue='string',
    Role='string',
    Settings={
        'AdAvailOffset': 123,
        'AvailBlanking': {
            'AvailBlankingImage': 'string'
        },
        'Esam': {
            'ManifestConfirmConditionNotification': {
                'MccXml': 'string'
            },
            'ResponseSignalPreroll': 123,
            'SignalProcessingNotification': {
                'SccXml': 'string'
            }
        },
        'Inputs': [
            {
                'AudioSelectorGroups': {
                    'string': {
                        'AudioSelectorNames': [
                            'string',
                        ]
                    }
                },
                'AudioSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                        'ExternalAudioFileInput': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'Offset': 123,
                        'Pids': [
                            123,
                        ],
                        'ProgramSelection': 123,
                        'RemixSettings': {
                            'ChannelMapping': {
                                'OutputChannels': [
                                    {
                                        'InputChannels': [
                                            123,
                                        ],
                                        'InputChannelsFineTune': [
                                            123.0,
                                        ]
                                    },
                                ]
                            },
                            'ChannelsIn': 123,
                            'ChannelsOut': 123
                        },
                        'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                        'Tracks': [
                            123,
                        ]
                    }
                },
                'CaptionSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'SourceSettings': {
                            'AncillarySourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'SourceAncillaryChannelNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'DvbSubSourceSettings': {
                                'Pid': 123
                            },
                            'EmbeddedSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Source608ChannelNumber': 123,
                                'Source608TrackNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'FileSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Framerate': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123
                                },
                                'SourceFile': 'string',
                                'TimeDelta': 123
                            },
                            'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                            'TeletextSourceSettings': {
                                'PageNumber': 'string'
                            },
                            'TrackSourceSettings': {
                                'TrackNumber': 123
                            }
                        }
                    }
                },
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DeblockFilter': 'ENABLED'|'DISABLED',
                'DecryptionSettings': {
                    'DecryptionMode': 'AES_CTR'|'AES_CBC'|'AES_GCM',
                    'EncryptedDecryptionKey': 'string',
                    'InitializationVector': 'string',
                    'KmsKeyRegion': 'string'
                },
                'DenoiseFilter': 'ENABLED'|'DISABLED',
                'FileInput': 'string',
                'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                'FilterStrength': 123,
                'ImageInserter': {
                    'InsertableImages': [
                        {
                            'Duration': 123,
                            'FadeIn': 123,
                            'FadeOut': 123,
                            'Height': 123,
                            'ImageInserterInput': 'string',
                            'ImageX': 123,
                            'ImageY': 123,
                            'Layer': 123,
                            'Opacity': 123,
                            'StartTime': 'string',
                            'Width': 123
                        },
                    ]
                },
                'InputClippings': [
                    {
                        'EndTimecode': 'string',
                        'StartTimecode': 'string'
                    },
                ],
                'InputScanType': 'AUTO'|'PSF',
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'ProgramNumber': 123,
                'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                'SupplementalImps': [
                    'string',
                ],
                'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'TimecodeStart': 'string',
                'VideoSelector': {
                    'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                    'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                    'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                    'Hdr10Metadata': {
                        'BluePrimaryX': 123,
                        'BluePrimaryY': 123,
                        'GreenPrimaryX': 123,
                        'GreenPrimaryY': 123,
                        'MaxContentLightLevel': 123,
                        'MaxFrameAverageLightLevel': 123,
                        'MaxLuminance': 123,
                        'MinLuminance': 123,
                        'RedPrimaryX': 123,
                        'RedPrimaryY': 123,
                        'WhitePointX': 123,
                        'WhitePointY': 123
                    },
                    'Pid': 123,
                    'ProgramNumber': 123,
                    'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                }
            },
        ],
        'MotionImageInserter': {
            'Framerate': {
                'FramerateDenominator': 123,
                'FramerateNumerator': 123
            },
            'Input': 'string',
            'InsertionMode': 'MOV'|'PNG',
            'Offset': {
                'ImageX': 123,
                'ImageY': 123
            },
            'Playback': 'ONCE'|'REPEAT',
            'StartTime': 'string'
        },
        'NielsenConfiguration': {
            'BreakoutCode': 123,
            'DistributorId': 'string'
        },
        'NielsenNonLinearWatermark': {
            'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
            'AdiFilename': 'string',
            'AssetId': 'string',
            'AssetName': 'string',
            'CbetSourceId': 'string',
            'EpisodeId': 'string',
            'MetadataDestination': 'string',
            'SourceId': 123,
            'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
            'TicServerUrl': 'string',
            'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
        },
        'OutputGroups': [
            {
                'AutomatedEncodingSettings': {
                    'AbrSettings': {
                        'MaxAbrBitrate': 123,
                        'MaxRenditions': 123,
                        'MinAbrBitrate': 123
                    }
                },
                'CustomName': 'string',
                'Name': 'string',
                'OutputGroupSettings': {
                    'CmafGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'BaseUrl': 'string',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'DashSignaledSystemIds': [
                                    'string',
                                ],
                                'HlsSignaledSystemIds': [
                                    'string',
                                ],
                                'ResourceId': 'string',
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'FragmentLength': 123,
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'WriteDashManifest': 'DISABLED'|'ENABLED',
                        'WriteHlsManifest': 'DISABLED'|'ENABLED',
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'DashIsoGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                        'BaseUrl': 'string',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'FileGroupSettings': {
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        }
                    },
                    'HlsGroupSettings': {
                        'AdMarkers': [
                            'ELEMENTAL'|'ELEMENTAL_SCTE35',
                        ],
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                        'BaseUrl': 'string',
                        'CaptionLanguageMappings': [
                            {
                                'CaptionChannel': 123,
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'OfflineEncrypted': 'ENABLED'|'DISABLED',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinFinalSegmentLength': 123.0,
                        'MinSegmentLength': 123,
                        'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                        'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                        'ProgramDateTimePeriod': 123,
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'SegmentsPerSubdirectory': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                        'TimedMetadataId3Period': 123,
                        'TimestampDeltaMilliseconds': 123
                    },
                    'MsSmoothGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'ManifestEncoding': 'UTF8'|'UTF16'
                    },
                    'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                },
                'Outputs': [
                    {
                        'AudioDescriptions': [
                            {
                                'AudioChannelTaggingSettings': {
                                    'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                },
                                'AudioNormalizationSettings': {
                                    'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                    'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                    'CorrectionGateLevel': 123,
                                    'LoudnessLogging': 'LOG'|'DONT_LOG',
                                    'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                    'TargetLkfs': 123.0
                                },
                                'AudioSourceName': 'string',
                                'AudioType': 123,
                                'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'CodecSettings': {
                                    'AacSettings': {
                                        'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                        'Bitrate': 123,
                                        'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                        'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                        'RateControlMode': 'CBR'|'VBR',
                                        'RawFormat': 'LATM_LOAS'|'NONE',
                                        'SampleRate': 123,
                                        'Specification': 'MPEG2'|'MPEG4',
                                        'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                    },
                                    'Ac3Settings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                        'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'SampleRate': 123
                                    },
                                    'AiffSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                    'Eac3AtmosSettings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN',
                                        'CodingMode': 'CODING_MODE_9_1_6',
                                        'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'SampleRate': 123,
                                        'SpeechThreshold': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Eac3Settings': {
                                        'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                        'DcFilter': 'ENABLED'|'DISABLED',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LfeControl': 'LFE'|'NO_LFE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                        'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                        'SampleRate': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                        'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Mp2Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Mp3Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'RateControlMode': 'CBR'|'VBR',
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'OpusSettings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'VorbisSettings': {
                                        'Channels': 123,
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'WavSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'Format': 'RIFF'|'RF64',
                                        'SampleRate': 123
                                    }
                                },
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'StreamName': 'string'
                            },
                        ],
                        'CaptionDescriptions': [
                            {
                                'CaptionSelectorName': 'string',
                                'CustomLanguageCode': 'string',
                                'DestinationSettings': {
                                    'BurninDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                    'DvbSubDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'EmbeddedDestinationSettings': {
                                        'Destination608ChannelNumber': 123,
                                        'Destination708ServiceNumber': 123
                                    },
                                    'ImscDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'SccDestinationSettings': {
                                        'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                    },
                                    'TeletextDestinationSettings': {
                                        'PageNumber': 'string',
                                        'PageTypes': [
                                            'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                        ]
                                    },
                                    'TtmlDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'WebvttDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    }
                                },
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'ContainerSettings': {
                            'CmfcSettings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioGroupId': 'string',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                            'F4vSettings': {
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                            },
                            'M2tsSettings': {
                                'AudioBufferModel': 'DVB'|'ATSC',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'Bitrate': 123,
                                'BufferModel': 'MULTIPLEX'|'NONE',
                                'DvbNitSettings': {
                                    'NetworkId': 123,
                                    'NetworkName': 'string',
                                    'NitInterval': 123
                                },
                                'DvbSdtSettings': {
                                    'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                    'SdtInterval': 123,
                                    'ServiceName': 'string',
                                    'ServiceProviderName': 'string'
                                },
                                'DvbSubPids': [
                                    123,
                                ],
                                'DvbTdtSettings': {
                                    'TdtInterval': 123
                                },
                                'DvbTeletextPid': 123,
                                'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                'FragmentTime': 123.0,
                                'MaxPcrInterval': 123,
                                'MinEbpInterval': 123,
                                'NielsenId3': 'INSERT'|'NONE',
                                'NullPacketBitrate': 123.0,
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'RateMode': 'VBR'|'CBR',
                                'Scte35Esam': {
                                    'Scte35EsamPid': 123
                                },
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                'SegmentationTime': 123.0,
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'M3u8Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'NielsenId3': 'INSERT'|'NONE',
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'MovSettings': {
                                'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                'PaddingControl': 'OMNEON'|'NONE',
                                'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                            },
                            'Mp4Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'CttsVersion': 123,
                                'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                'Mp4MajorBrand': 'string'
                            },
                            'MpdSettings': {
                                'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'MxfSettings': {
                                'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                'Profile': 'D_10'|'XDCAM'|'OP1A'
                            }
                        },
                        'Extension': 'string',
                        'NameModifier': 'string',
                        'OutputSettings': {
                            'HlsSettings': {
                                'AudioGroupId': 'string',
                                'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'SegmentModifier': 'string'
                            }
                        },
                        'Preset': 'string',
                        'VideoDescription': {
                            'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                            'AntiAlias': 'DISABLED'|'ENABLED',
                            'CodecSettings': {
                                'Av1Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'MaxBitrate': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'QvbrSettings': {
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'QVBR',
                                    'Slices': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'AvcIntraSettings': {
                                    'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                    'AvcIntraUhdSettings': {
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                    },
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                'FrameCaptureSettings': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'MaxCaptures': 123,
                                    'Quality': 123
                                },
                                'H264Settings': {
                                    'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                    'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'EntropyEncoding': 'CABAC'|'CAVLC',
                                    'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'RepeatPps': 'DISABLED'|'ENABLED',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'RP2027',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                },
                                'H265Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                    'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'TemporalIds': 'DISABLED'|'ENABLED',
                                    'Tiles': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                    'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                },
                                'Mpeg2Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                    'CodecProfile': 'MAIN'|'PROFILE_422',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                    'RateControlMode': 'VBR'|'CBR',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'D_10',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'ProresSettings': {
                                    'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Vc3Settings': {
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD',
                                    'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                },
                                'Vp8Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                },
                                'Vp9Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                }
                            },
                            'ColorMetadata': 'IGNORE'|'INSERT',
                            'Crop': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'DropFrameTimecode': 'DISABLED'|'ENABLED',
                            'FixedAfd': 123,
                            'Height': 123,
                            'Position': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                            'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                            'Sharpness': 123,
                            'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                            'VideoPreprocessors': {
                                'ColorCorrector': {
                                    'Brightness': 123,
                                    'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                    'Contrast': 123,
                                    'Hdr10Metadata': {
                                        'BluePrimaryX': 123,
                                        'BluePrimaryY': 123,
                                        'GreenPrimaryX': 123,
                                        'GreenPrimaryY': 123,
                                        'MaxContentLightLevel': 123,
                                        'MaxFrameAverageLightLevel': 123,
                                        'MaxLuminance': 123,
                                        'MinLuminance': 123,
                                        'RedPrimaryX': 123,
                                        'RedPrimaryY': 123,
                                        'WhitePointX': 123,
                                        'WhitePointY': 123
                                    },
                                    'Hue': 123,
                                    'Saturation': 123
                                },
                                'Deinterlacer': {
                                    'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                    'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                    'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                },
                                'DolbyVision': {
                                    'L6Metadata': {
                                        'MaxCll': 123,
                                        'MaxFall': 123
                                    },
                                    'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                    'Profile': 'PROFILE_5'
                                },
                                'ImageInserter': {
                                    'InsertableImages': [
                                        {
                                            'Duration': 123,
                                            'FadeIn': 123,
                                            'FadeOut': 123,
                                            'Height': 123,
                                            'ImageInserterInput': 'string',
                                            'ImageX': 123,
                                            'ImageY': 123,
                                            'Layer': 123,
                                            'Opacity': 123,
                                            'StartTime': 'string',
                                            'Width': 123
                                        },
                                    ]
                                },
                                'NoiseReducer': {
                                    'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                    'FilterSettings': {
                                        'Strength': 123
                                    },
                                    'SpatialFilterSettings': {
                                        'PostFilterSharpenStrength': 123,
                                        'Speed': 123,
                                        'Strength': 123
                                    },
                                    'TemporalFilterSettings': {
                                        'AggressiveMode': 123,
                                        'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                        'Speed': 123,
                                        'Strength': 123
                                    }
                                },
                                'PartnerWatermarking': {
                                    'NexguardFileMarkerSettings': {
                                        'License': 'string',
                                        'Payload': 123,
                                        'Preset': 'string',
                                        'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                    }
                                },
                                'TimecodeBurnin': {
                                    'FontSize': 123,
                                    'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                    'Prefix': 'string'
                                }
                            },
                            'Width': 123
                        }
                    },
                ]
            },
        ],
        'TimecodeConfig': {
            'Anchor': 'string',
            'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
            'Start': 'string',
            'TimestampOffset': 'string'
        },
        'TimedMetadataInsertion': {
            'Id3Insertions': [
                {
                    'Id3': 'string',
                    'Timecode': 'string'
                },
            ]
        }
    },
    SimulateReservedQueue='DISABLED'|'ENABLED',
    StatusUpdateInterval='SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
    Tags={
        'string': 'string'
    },
    UserMetadata={
        'string': 'string'
    }
)
Parameters
  • AccelerationSettings (dict) --

    Optional. Accelerated transcoding can significantly speed up jobs with long, visually complex content. Outputs that use this feature incur pro-tier pricing. For information about feature limitations, see the AWS Elemental MediaConvert User Guide.

    • Mode (string) -- [REQUIRED] Specify the conditions when the service will run your job with accelerated transcoding.
  • BillingTagsSource (string) -- Optional. Choose a tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any billing report that you set up. Any transcoding outputs that don't have an associated tag will appear in your billing report unsorted. If you don't choose a valid value for this field, your job outputs will appear on the billing report unsorted.
  • ClientRequestToken (string) -- Optional. Idempotency token for CreateJob operation.This field is autopopulated if not provided.
  • HopDestinations (list) --

    Optional. Use queue hopping to avoid overly long waits in the backlog of the queue that you submit your job to. Specify an alternate queue and the maximum time that your job will wait in the initial queue before hopping. For more information about this feature, see the AWS Elemental MediaConvert User Guide.

    • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
      • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
      • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
      • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
  • JobTemplate (string) -- Optional. When you create a job, you can either specify a job template or specify the transcoding settings individually.
  • Priority (integer) -- Optional. Specify the relative priority for this job. In any given queue, the service begins processing the job with the highest value first. When more than one job has the same priority, the service begins processing the job that you submitted first. If you don't specify a priority, the service uses the default value 0.
  • Queue (string) -- Optional. When you create a job, you can specify a queue to send it to. If you don't specify, the job will go to the default queue. For more about queues, see the User Guide topic at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html.
  • Role (string) -- [REQUIRED] Required. The IAM role you use for creating this job. For details about permissions, see the User Guide topic at the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/iam-role.html.
  • Settings (dict) --

    [REQUIRED] JobSettings contains all the transcode settings for a job.

    • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
    • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
      • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
    • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
        • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
      • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
      • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
        • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
    • Inputs (list) -- Use Inputs (inputs) to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
      • (dict) -- Use inputs to define the source files used in your transcoding job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/specify-input-settings.html. You can use multiple video inputs to do input stitching. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html
        • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
          • (string) --
            • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                • (string) --
        • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
          • (string) --
            • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
              • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
              • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
              • LanguageCode (string) -- Selects a specific language code from within an audio source.
              • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
              • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                • (integer) --
              • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
              • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                  • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                    • (dict) -- OutputChannel mapping settings.
                      • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                        • (integer) --
                      • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                        • (float) --
                • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • SelectorType (string) -- Specifies the type of the audio selector.
              • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                • (integer) --
        • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
          • (string) --
            • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                  • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                  • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                    • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                    • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                  • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                  • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                  • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                  • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
        • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
        • DecryptionSettings (dict) -- Settings for decrypting any input files that you encrypt before you upload them to Amazon S3. MediaConvert can decrypt files only when you use AWS Key Management Service (KMS) to encrypt the data key that you use to encrypt your content.
          • DecryptionMode (string) -- Specify the encryption mode that you used to encrypt your input files.
          • EncryptedDecryptionKey (string) -- Warning! Don't provide your encryption key in plaintext. Your job settings could be intercepted, making your encrypted content vulnerable. Specify the encrypted version of the data key that you used to encrypt your content. The data key must be encrypted by AWS Key Management Service (KMS). The key can be 128, 192, or 256 bits.
          • InitializationVector (string) -- Specify the initialization vector that you used when you encrypted your content before uploading it to Amazon S3. You can use a 16-byte initialization vector with any encryption mode. Or, you can use a 12-byte initialization vector with GCM or CTR. MediaConvert accepts only initialization vectors that are base64-encoded.
          • KmsKeyRegion (string) -- Specify the AWS Region for AWS Key Management Service (KMS) that you used to encrypt your data key, if that Region is different from the one you are using for AWS Elemental MediaConvert.
        • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
        • FileInput (string) -- Specify the source file for your transcoding job. You can use multiple inputs in a single job. The service concatenates these inputs, in the order that you specify them in the job, to create the outputs. If your input format is IMF, specify your input by providing the path to your CPL. For example, "s3://bucket/vf/cpl.xml". If the CPL is in an incomplete IMP, make sure to use Supplemental IMPs (SupplementalImps) to specify any supplemental IMPs that contain assets referenced by the CPL.
        • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
        • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
        • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
          • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
            • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
              • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
              • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
              • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
              • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
              • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
              • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
              • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
              • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
              • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
              • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
              • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
        • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
          • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
            • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
            • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
        • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
        • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
        • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
        • SupplementalImps (list) -- Provide a list of any necessary supplemental IMPs. You need supplemental IMPs if the CPL that you're using for your input is in an incomplete IMP. Specify either the supplemental IMP directories with a trailing slash or the ASSETMAP.xml files. For example ["s3://bucket/ov/", "s3://bucket/vf2/ASSETMAP.xml"]. You don't need to specify the IMP that contains your input CPL, because the service automatically detects it.
          • (string) --
        • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
          • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
          • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
          • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
          • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
            • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
            • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
            • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
          • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
          • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
          • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
    • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
      • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
        • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
        • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
      • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
      • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
      • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
        • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
        • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
      • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
      • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
    • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
      • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
      • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
    • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
      • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
      • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
      • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
      • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
      • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
      • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
      • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
      • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
      • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
      • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
      • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
    • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
      • (dict) -- Group of outputs
        • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
          • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
            • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
            • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
            • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
        • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
        • Name (string) -- Name of the output group
        • OutputGroupSettings (dict) -- Output Group settings, including type
          • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
              • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
              • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
              • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
            • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
            • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
          • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
          • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
          • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
            • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
              • (string) --
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
            • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
            • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
              • (dict) -- Caption Language Mapping
                • CaptionChannel (integer) -- Caption channel.
                • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                • LanguageDescription (string) -- Caption language description.
            • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
              • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
              • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
            • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
            • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
            • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
            • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
            • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
            • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
            • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
            • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
          • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
            • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
          • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
        • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
          • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
            • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
              • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                  • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                  • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                  • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                  • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                  • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                  • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                  • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                  • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                    • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                    • CodecProfile (string) -- AAC Profile.
                    • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                    • RateControlMode (string) -- Rate Control Mode.
                    • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                    • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                    • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                    • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                  • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                  • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                    • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                    • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                    • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                    • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                  • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                    • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                    • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                    • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                    • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                    • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                  • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                    • SampleRate (integer) -- Sample rate in hz.
                    • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                  • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                    • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                  • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                    • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                    • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                    • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                  • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                    • SampleRate (integer) -- Sample rate in Hz.
                • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                • RemixSettings (dict) -- Advanced audio remixing settings.
                  • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                    • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                      • (dict) -- OutputChannel mapping settings.
                        • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                          • (integer) --
                        • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                          • (float) --
                  • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
              • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                  • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                  • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                    • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                    • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                  • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                    • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                  • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                    • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                  • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                    • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                    • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                      • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                  • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                    • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                  • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                    • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • ContainerSettings (dict) -- Container specific settings.
              • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
              • F4vSettings (dict) -- Settings for F4v container
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
              • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                  • (integer) --
                • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                  • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                  • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                  • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                  • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                  • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                  • (integer) --
                • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                  • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
              • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                  • (integer) --
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
              • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
              • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
              • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • MxfSettings (dict) -- These settings relate to your MXF output container.
                • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
            • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
            • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
            • OutputSettings (dict) -- Specific settings for this type of output.
              • HlsSettings (dict) -- Settings for HLS output groups
                • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
            • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
            • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
              • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
              • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
              • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                  • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                  • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                  • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                    • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                  • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                  • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                  • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                  • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                  • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                  • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                  • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                  • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                • H265Settings (dict) -- Settings for H265 codec
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- H.265 Level.
                  • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                  • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                  • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                  • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                  • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                  • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
              • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
              • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
              • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
              • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
              • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
              • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
              • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                  • Brightness (integer) -- Brightness level.
                  • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                  • Contrast (integer) -- Contrast level.
                  • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                    • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                    • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                    • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • Hue (integer) -- Hue in degrees.
                  • Saturation (integer) -- Saturation level.
                • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                  • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                  • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                  • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                  • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                    • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                    • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                  • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                  • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                    • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                      • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                      • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                      • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                      • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                      • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                      • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                      • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                      • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                      • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                      • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                      • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                  • FilterSettings (dict) -- Settings for a noise reducer filter
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                    • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                    • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                    • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                    • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                    • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                    • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                  • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                    • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                    • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                  • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                  • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                  • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
              • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
    • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
      • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
      • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
      • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
      • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
    • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
      • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
        • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
          • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
          • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
  • SimulateReservedQueue (string) -- Optional. Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need. When this is enabled, MediaConvert runs your job from an on-demand queue with similar performance to what you will see with one RTS in a reserved queue. This setting is disabled by default.
  • StatusUpdateInterval (string) -- Optional. Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
  • Tags (dict) --

    Optional. The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key. Use standard AWS tags on your job for automatic integration with AWS services and for custom integrations and workflows.

    • (string) --
      • (string) --
  • UserMetadata (dict) --

    Optional. User-defined metadata that you want to associate with an MediaConvert job. You specify metadata in key/value pairs. Use only for existing integrations or workflows that rely on job metadata tags. Otherwise, we recommend that you use standard AWS tags.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'Job': {
        'AccelerationSettings': {
            'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
        },
        'AccelerationStatus': 'NOT_APPLICABLE'|'IN_PROGRESS'|'ACCELERATED'|'NOT_ACCELERATED',
        'Arn': 'string',
        'BillingTagsSource': 'QUEUE'|'PRESET'|'JOB_TEMPLATE'|'JOB',
        'CreatedAt': datetime(2015, 1, 1),
        'CurrentPhase': 'PROBING'|'TRANSCODING'|'UPLOADING',
        'ErrorCode': 123,
        'ErrorMessage': 'string',
        'HopDestinations': [
            {
                'Priority': 123,
                'Queue': 'string',
                'WaitMinutes': 123
            },
        ],
        'Id': 'string',
        'JobPercentComplete': 123,
        'JobTemplate': 'string',
        'Messages': {
            'Info': [
                'string',
            ],
            'Warning': [
                'string',
            ]
        },
        'OutputGroupDetails': [
            {
                'OutputDetails': [
                    {
                        'DurationInMs': 123,
                        'VideoDetails': {
                            'HeightInPx': 123,
                            'WidthInPx': 123
                        }
                    },
                ]
            },
        ],
        'Priority': 123,
        'Queue': 'string',
        'QueueTransitions': [
            {
                'DestinationQueue': 'string',
                'SourceQueue': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ],
        'RetryCount': 123,
        'Role': 'string',
        'Settings': {
            'AdAvailOffset': 123,
            'AvailBlanking': {
                'AvailBlankingImage': 'string'
            },
            'Esam': {
                'ManifestConfirmConditionNotification': {
                    'MccXml': 'string'
                },
                'ResponseSignalPreroll': 123,
                'SignalProcessingNotification': {
                    'SccXml': 'string'
                }
            },
            'Inputs': [
                {
                    'AudioSelectorGroups': {
                        'string': {
                            'AudioSelectorNames': [
                                'string',
                            ]
                        }
                    },
                    'AudioSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                            'ExternalAudioFileInput': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'Offset': 123,
                            'Pids': [
                                123,
                            ],
                            'ProgramSelection': 123,
                            'RemixSettings': {
                                'ChannelMapping': {
                                    'OutputChannels': [
                                        {
                                            'InputChannels': [
                                                123,
                                            ],
                                            'InputChannelsFineTune': [
                                                123.0,
                                            ]
                                        },
                                    ]
                                },
                                'ChannelsIn': 123,
                                'ChannelsOut': 123
                            },
                            'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                            'Tracks': [
                                123,
                            ]
                        }
                    },
                    'CaptionSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'SourceSettings': {
                                'AncillarySourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'SourceAncillaryChannelNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'DvbSubSourceSettings': {
                                    'Pid': 123
                                },
                                'EmbeddedSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Source608ChannelNumber': 123,
                                    'Source608TrackNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'FileSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Framerate': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123
                                    },
                                    'SourceFile': 'string',
                                    'TimeDelta': 123
                                },
                                'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                'TeletextSourceSettings': {
                                    'PageNumber': 'string'
                                },
                                'TrackSourceSettings': {
                                    'TrackNumber': 123
                                }
                            }
                        }
                    },
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DeblockFilter': 'ENABLED'|'DISABLED',
                    'DecryptionSettings': {
                        'DecryptionMode': 'AES_CTR'|'AES_CBC'|'AES_GCM',
                        'EncryptedDecryptionKey': 'string',
                        'InitializationVector': 'string',
                        'KmsKeyRegion': 'string'
                    },
                    'DenoiseFilter': 'ENABLED'|'DISABLED',
                    'FileInput': 'string',
                    'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                    'FilterStrength': 123,
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'InputClippings': [
                        {
                            'EndTimecode': 'string',
                            'StartTimecode': 'string'
                        },
                    ],
                    'InputScanType': 'AUTO'|'PSF',
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'ProgramNumber': 123,
                    'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                    'SupplementalImps': [
                        'string',
                    ],
                    'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'TimecodeStart': 'string',
                    'VideoSelector': {
                        'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                        'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                        'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Pid': 123,
                        'ProgramNumber': 123,
                        'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                    }
                },
            ],
            'MotionImageInserter': {
                'Framerate': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123
                },
                'Input': 'string',
                'InsertionMode': 'MOV'|'PNG',
                'Offset': {
                    'ImageX': 123,
                    'ImageY': 123
                },
                'Playback': 'ONCE'|'REPEAT',
                'StartTime': 'string'
            },
            'NielsenConfiguration': {
                'BreakoutCode': 123,
                'DistributorId': 'string'
            },
            'NielsenNonLinearWatermark': {
                'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                'AdiFilename': 'string',
                'AssetId': 'string',
                'AssetName': 'string',
                'CbetSourceId': 'string',
                'EpisodeId': 'string',
                'MetadataDestination': 'string',
                'SourceId': 123,
                'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                'TicServerUrl': 'string',
                'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
            },
            'OutputGroups': [
                {
                    'AutomatedEncodingSettings': {
                        'AbrSettings': {
                            'MaxAbrBitrate': 123,
                            'MaxRenditions': 123,
                            'MinAbrBitrate': 123
                        }
                    },
                    'CustomName': 'string',
                    'Name': 'string',
                    'OutputGroupSettings': {
                        'CmafGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'BaseUrl': 'string',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'DashSignaledSystemIds': [
                                        'string',
                                    ],
                                    'HlsSignaledSystemIds': [
                                        'string',
                                    ],
                                    'ResourceId': 'string',
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'FragmentLength': 123,
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'WriteDashManifest': 'DISABLED'|'ENABLED',
                            'WriteHlsManifest': 'DISABLED'|'ENABLED',
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'DashIsoGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                            'BaseUrl': 'string',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'FileGroupSettings': {
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            }
                        },
                        'HlsGroupSettings': {
                            'AdMarkers': [
                                'ELEMENTAL'|'ELEMENTAL_SCTE35',
                            ],
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                            'BaseUrl': 'string',
                            'CaptionLanguageMappings': [
                                {
                                    'CaptionChannel': 123,
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinFinalSegmentLength': 123.0,
                            'MinSegmentLength': 123,
                            'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                            'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                            'ProgramDateTimePeriod': 123,
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'SegmentsPerSubdirectory': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                            'TimedMetadataId3Period': 123,
                            'TimestampDeltaMilliseconds': 123
                        },
                        'MsSmoothGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'ManifestEncoding': 'UTF8'|'UTF16'
                        },
                        'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                    },
                    'Outputs': [
                        {
                            'AudioDescriptions': [
                                {
                                    'AudioChannelTaggingSettings': {
                                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                    },
                                    'AudioNormalizationSettings': {
                                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                        'CorrectionGateLevel': 123,
                                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                        'TargetLkfs': 123.0
                                    },
                                    'AudioSourceName': 'string',
                                    'AudioType': 123,
                                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'CodecSettings': {
                                        'AacSettings': {
                                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                            'Bitrate': 123,
                                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                            'RateControlMode': 'CBR'|'VBR',
                                            'RawFormat': 'LATM_LOAS'|'NONE',
                                            'SampleRate': 123,
                                            'Specification': 'MPEG2'|'MPEG4',
                                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                        },
                                        'Ac3Settings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'SampleRate': 123
                                        },
                                        'AiffSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                        'Eac3AtmosSettings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN',
                                            'CodingMode': 'CODING_MODE_9_1_6',
                                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'SampleRate': 123,
                                            'SpeechThreshold': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Eac3Settings': {
                                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                            'DcFilter': 'ENABLED'|'DISABLED',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LfeControl': 'LFE'|'NO_LFE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                            'SampleRate': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Mp2Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Mp3Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'RateControlMode': 'CBR'|'VBR',
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'OpusSettings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'VorbisSettings': {
                                            'Channels': 123,
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'WavSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'Format': 'RIFF'|'RF64',
                                            'SampleRate': 123
                                        }
                                    },
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'RemixSettings': {
                                        'ChannelMapping': {
                                            'OutputChannels': [
                                                {
                                                    'InputChannels': [
                                                        123,
                                                    ],
                                                    'InputChannelsFineTune': [
                                                        123.0,
                                                    ]
                                                },
                                            ]
                                        },
                                        'ChannelsIn': 123,
                                        'ChannelsOut': 123
                                    },
                                    'StreamName': 'string'
                                },
                            ],
                            'CaptionDescriptions': [
                                {
                                    'CaptionSelectorName': 'string',
                                    'CustomLanguageCode': 'string',
                                    'DestinationSettings': {
                                        'BurninDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                        'DvbSubDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'EmbeddedDestinationSettings': {
                                            'Destination608ChannelNumber': 123,
                                            'Destination708ServiceNumber': 123
                                        },
                                        'ImscDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'SccDestinationSettings': {
                                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                        },
                                        'TeletextDestinationSettings': {
                                            'PageNumber': 'string',
                                            'PageTypes': [
                                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                            ]
                                        },
                                        'TtmlDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'WebvttDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        }
                                    },
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'ContainerSettings': {
                                'CmfcSettings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioGroupId': 'string',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                'F4vSettings': {
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                },
                                'M2tsSettings': {
                                    'AudioBufferModel': 'DVB'|'ATSC',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'Bitrate': 123,
                                    'BufferModel': 'MULTIPLEX'|'NONE',
                                    'DvbNitSettings': {
                                        'NetworkId': 123,
                                        'NetworkName': 'string',
                                        'NitInterval': 123
                                    },
                                    'DvbSdtSettings': {
                                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                        'SdtInterval': 123,
                                        'ServiceName': 'string',
                                        'ServiceProviderName': 'string'
                                    },
                                    'DvbSubPids': [
                                        123,
                                    ],
                                    'DvbTdtSettings': {
                                        'TdtInterval': 123
                                    },
                                    'DvbTeletextPid': 123,
                                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                    'FragmentTime': 123.0,
                                    'MaxPcrInterval': 123,
                                    'MinEbpInterval': 123,
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'NullPacketBitrate': 123.0,
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'RateMode': 'VBR'|'CBR',
                                    'Scte35Esam': {
                                        'Scte35EsamPid': 123
                                    },
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                    'SegmentationTime': 123.0,
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'M3u8Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'MovSettings': {
                                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                    'PaddingControl': 'OMNEON'|'NONE',
                                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                },
                                'Mp4Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'CttsVersion': 123,
                                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                    'Mp4MajorBrand': 'string'
                                },
                                'MpdSettings': {
                                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'MxfSettings': {
                                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                                }
                            },
                            'Extension': 'string',
                            'NameModifier': 'string',
                            'OutputSettings': {
                                'HlsSettings': {
                                    'AudioGroupId': 'string',
                                    'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'SegmentModifier': 'string'
                                }
                            },
                            'Preset': 'string',
                            'VideoDescription': {
                                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                'AntiAlias': 'DISABLED'|'ENABLED',
                                'CodecSettings': {
                                    'Av1Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'MaxBitrate': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'QvbrSettings': {
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'QVBR',
                                        'Slices': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'AvcIntraSettings': {
                                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                        'AvcIntraUhdSettings': {
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                        },
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                    'FrameCaptureSettings': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'MaxCaptures': 123,
                                        'Quality': 123
                                    },
                                    'H264Settings': {
                                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'EntropyEncoding': 'CABAC'|'CAVLC',
                                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'RepeatPps': 'DISABLED'|'ENABLED',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'RP2027',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                    },
                                    'H265Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'TemporalIds': 'DISABLED'|'ENABLED',
                                        'Tiles': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                    },
                                    'Mpeg2Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                        'CodecProfile': 'MAIN'|'PROFILE_422',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                        'RateControlMode': 'VBR'|'CBR',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'D_10',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'ProresSettings': {
                                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Vc3Settings': {
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD',
                                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                    },
                                    'Vp8Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    },
                                    'Vp9Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    }
                                },
                                'ColorMetadata': 'IGNORE'|'INSERT',
                                'Crop': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                'FixedAfd': 123,
                                'Height': 123,
                                'Position': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                'Sharpness': 123,
                                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                'VideoPreprocessors': {
                                    'ColorCorrector': {
                                        'Brightness': 123,
                                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                        'Contrast': 123,
                                        'Hdr10Metadata': {
                                            'BluePrimaryX': 123,
                                            'BluePrimaryY': 123,
                                            'GreenPrimaryX': 123,
                                            'GreenPrimaryY': 123,
                                            'MaxContentLightLevel': 123,
                                            'MaxFrameAverageLightLevel': 123,
                                            'MaxLuminance': 123,
                                            'MinLuminance': 123,
                                            'RedPrimaryX': 123,
                                            'RedPrimaryY': 123,
                                            'WhitePointX': 123,
                                            'WhitePointY': 123
                                        },
                                        'Hue': 123,
                                        'Saturation': 123
                                    },
                                    'Deinterlacer': {
                                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                    },
                                    'DolbyVision': {
                                        'L6Metadata': {
                                            'MaxCll': 123,
                                            'MaxFall': 123
                                        },
                                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                        'Profile': 'PROFILE_5'
                                    },
                                    'ImageInserter': {
                                        'InsertableImages': [
                                            {
                                                'Duration': 123,
                                                'FadeIn': 123,
                                                'FadeOut': 123,
                                                'Height': 123,
                                                'ImageInserterInput': 'string',
                                                'ImageX': 123,
                                                'ImageY': 123,
                                                'Layer': 123,
                                                'Opacity': 123,
                                                'StartTime': 'string',
                                                'Width': 123
                                            },
                                        ]
                                    },
                                    'NoiseReducer': {
                                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                        'FilterSettings': {
                                            'Strength': 123
                                        },
                                        'SpatialFilterSettings': {
                                            'PostFilterSharpenStrength': 123,
                                            'Speed': 123,
                                            'Strength': 123
                                        },
                                        'TemporalFilterSettings': {
                                            'AggressiveMode': 123,
                                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                            'Speed': 123,
                                            'Strength': 123
                                        }
                                    },
                                    'PartnerWatermarking': {
                                        'NexguardFileMarkerSettings': {
                                            'License': 'string',
                                            'Payload': 123,
                                            'Preset': 'string',
                                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                        }
                                    },
                                    'TimecodeBurnin': {
                                        'FontSize': 123,
                                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                        'Prefix': 'string'
                                    }
                                },
                                'Width': 123
                            }
                        },
                    ]
                },
            ],
            'TimecodeConfig': {
                'Anchor': 'string',
                'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'Start': 'string',
                'TimestampOffset': 'string'
            },
            'TimedMetadataInsertion': {
                'Id3Insertions': [
                    {
                        'Id3': 'string',
                        'Timecode': 'string'
                    },
                ]
            }
        },
        'SimulateReservedQueue': 'DISABLED'|'ENABLED',
        'Status': 'SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR',
        'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
        'Timing': {
            'FinishTime': datetime(2015, 1, 1),
            'StartTime': datetime(2015, 1, 1),
            'SubmitTime': datetime(2015, 1, 1)
        },
        'UserMetadata': {
            'string': 'string'
        }
    }
}

Response Structure

  • (dict) --
    • Job (dict) -- Each job converts an input file into an output file or files. For more information, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
      • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
        • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
      • AccelerationStatus (string) -- Describes whether the current job is running with accelerated transcoding. For jobs that have Acceleration (AccelerationMode) set to DISABLED, AccelerationStatus is always NOT_APPLICABLE. For jobs that have Acceleration (AccelerationMode) set to ENABLED or PREFERRED, AccelerationStatus is one of the other states. AccelerationStatus is IN_PROGRESS initially, while the service determines whether the input files and job settings are compatible with accelerated transcoding. If they are, AcclerationStatus is ACCELERATED. If your input files and job settings aren't compatible with accelerated transcoding, the service either fails your job or runs it without accelerated transcoding, depending on how you set Acceleration (AccelerationMode). When the service runs your job without accelerated transcoding, AccelerationStatus is NOT_ACCELERATED.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • BillingTagsSource (string) -- The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any billing report that you set up.
      • CreatedAt (datetime) -- The time, in Unix epoch format in seconds, when the job got created.
      • CurrentPhase (string) -- A job's phase can be PROBING, TRANSCODING OR UPLOADING
      • ErrorCode (integer) -- Error code for the job
      • ErrorMessage (string) -- Error message of Job
      • HopDestinations (list) -- Optional list of hop destinations.
        • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
          • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
          • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
          • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
      • Id (string) -- A portion of the job's ARN, unique within your AWS Elemental MediaConvert resources
      • JobPercentComplete (integer) -- An estimate of how far your job has progressed. This estimate is shown as a percentage of the total time from when your job leaves its queue to when your output files appear in your output Amazon S3 bucket. AWS Elemental MediaConvert provides jobPercentComplete in CloudWatch STATUS_UPDATE events and in the response to GetJob and ListJobs requests. The jobPercentComplete estimate is reliable for the following input containers: Quicktime, Transport Stream, MP4, and MXF. For some jobs, the service can't provide information about job progress. In those cases, jobPercentComplete returns a null value.
      • JobTemplate (string) -- The job template that the job is created from, if it is created from a job template.
      • Messages (dict) -- Provides messages from the service about jobs that you have already successfully submitted.
        • Info (list) -- List of messages that are informational only and don't indicate a problem with your job.
          • (string) --
        • Warning (list) -- List of messages that warn about conditions that might cause your job not to run or to fail.
          • (string) --
      • OutputGroupDetails (list) -- List of output group details
        • (dict) -- Contains details about the output groups specified in the job settings.
          • OutputDetails (list) -- Details about the output
            • (dict) -- Details regarding output
              • DurationInMs (integer) -- Duration in milliseconds
              • VideoDetails (dict) -- Contains details about the output's video stream
                • HeightInPx (integer) -- Height in pixels for the output
                • WidthInPx (integer) -- Width in pixels for the output
      • Priority (integer) -- Relative priority on the job.
      • Queue (string) -- When you create a job, you can specify a queue to send it to. If you don't specify, the job will go to the default queue. For more about queues, see the User Guide topic at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
      • QueueTransitions (list) -- The job's queue hopping history.
        • (dict) -- Description of the source and destination queues between which the job has moved, along with the timestamp of the move
          • DestinationQueue (string) -- The queue that the job was on after the transition.
          • SourceQueue (string) -- The queue that the job was on before the transition.
          • Timestamp (datetime) -- The time, in Unix epoch format, that the job moved from the source queue to the destination queue.
      • RetryCount (integer) -- The number of times that the service automatically attempted to process your job after encountering an error.
      • Role (string) -- The IAM role you use for creating this job. For details about permissions, see the User Guide topic at the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/iam-role.html
      • Settings (dict) -- JobSettings contains all the transcode settings for a job.
        • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
        • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
          • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
        • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
          • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
            • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
          • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
          • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
            • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
        • Inputs (list) -- Use Inputs (inputs) to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
          • (dict) -- Use inputs to define the source files used in your transcoding job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/specify-input-settings.html. You can use multiple video inputs to do input stitching. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html
            • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • (string) --
                • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                  • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                    • (string) --
            • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • (string) --
                • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                  • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                  • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                  • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                  • LanguageCode (string) -- Selects a specific language code from within an audio source.
                  • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                  • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                    • (integer) --
                  • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                  • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                    • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                      • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                        • (dict) -- OutputChannel mapping settings.
                          • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                            • (integer) --
                          • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                            • (float) --
                    • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • SelectorType (string) -- Specifies the type of the audio selector.
                  • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                    • (integer) --
            • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • (string) --
                • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                  • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                    • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                      • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                    • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                      • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                        • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                        • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                      • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                      • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                    • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                    • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                      • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                    • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                      • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
            • DecryptionSettings (dict) -- Settings for decrypting any input files that you encrypt before you upload them to Amazon S3. MediaConvert can decrypt files only when you use AWS Key Management Service (KMS) to encrypt the data key that you use to encrypt your content.
              • DecryptionMode (string) -- Specify the encryption mode that you used to encrypt your input files.
              • EncryptedDecryptionKey (string) -- Warning! Don't provide your encryption key in plaintext. Your job settings could be intercepted, making your encrypted content vulnerable. Specify the encrypted version of the data key that you used to encrypt your content. The data key must be encrypted by AWS Key Management Service (KMS). The key can be 128, 192, or 256 bits.
              • InitializationVector (string) -- Specify the initialization vector that you used when you encrypted your content before uploading it to Amazon S3. You can use a 16-byte initialization vector with any encryption mode. Or, you can use a 12-byte initialization vector with GCM or CTR. MediaConvert accepts only initialization vectors that are base64-encoded.
              • KmsKeyRegion (string) -- Specify the AWS Region for AWS Key Management Service (KMS) that you used to encrypt your data key, if that Region is different from the one you are using for AWS Elemental MediaConvert.
            • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
            • FileInput (string) -- Specify the source file for your transcoding job. You can use multiple inputs in a single job. The service concatenates these inputs, in the order that you specify them in the job, to create the outputs. If your input format is IMF, specify your input by providing the path to your CPL. For example, "s3://bucket/vf/cpl.xml". If the CPL is in an incomplete IMP, make sure to use Supplemental IMPs (SupplementalImps) to specify any supplemental IMPs that contain assets referenced by the CPL.
            • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
            • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
            • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
              • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
            • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
            • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
            • SupplementalImps (list) -- Provide a list of any necessary supplemental IMPs. You need supplemental IMPs if the CPL that you're using for your input is in an incomplete IMP. Specify either the supplemental IMP directories with a trailing slash or the ASSETMAP.xml files. For example ["s3://bucket/ov/", "s3://bucket/vf2/ASSETMAP.xml"]. You don't need to specify the IMP that contains your input CPL, because the service automatically detects it.
              • (string) --
            • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
              • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
              • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
              • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
              • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
              • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
              • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
        • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
          • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
            • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
            • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
          • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
          • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
          • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
            • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
            • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
          • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
          • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
        • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
          • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
          • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
        • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
          • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
          • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
          • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
          • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
          • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
          • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
          • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
          • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
          • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
          • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
          • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
        • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
          • (dict) -- Group of outputs
            • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
              • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
            • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
            • Name (string) -- Name of the output group
            • OutputGroupSettings (dict) -- Output Group settings, including type
              • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                  • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                  • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                  • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
              • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
              • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
              • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                  • (string) --
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                  • (dict) -- Caption Language Mapping
                    • CaptionChannel (integer) -- Caption channel.
                    • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                    • LanguageDescription (string) -- Caption language description.
                • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                  • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                  • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
              • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
              • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
            • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
              • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                  • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                    • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                      • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                    • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                      • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                      • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                      • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                      • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                      • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                      • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                    • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                    • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                    • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                    • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                      • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                        • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                        • CodecProfile (string) -- AAC Profile.
                        • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                        • RateControlMode (string) -- Rate Control Mode.
                        • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                        • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                        • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                        • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                      • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                      • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                      • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                        • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                        • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                        • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                        • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                      • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                        • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                        • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                        • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                        • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                        • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                      • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                        • SampleRate (integer) -- Sample rate in hz.
                        • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                      • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                        • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                      • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                        • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                        • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                        • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                      • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                        • SampleRate (integer) -- Sample rate in Hz.
                    • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                    • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                    • RemixSettings (dict) -- Advanced audio remixing settings.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                  • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                    • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                    • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                      • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                      • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                        • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                      • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                        • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                      • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                        • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                      • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                        • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                        • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                          • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                      • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                        • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                      • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                        • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                    • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                    • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • ContainerSettings (dict) -- Container specific settings.
                  • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                    • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                    • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                  • F4vSettings (dict) -- Settings for F4v container
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                  • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                    • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                      • (integer) --
                    • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                    • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                    • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                      • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                      • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                      • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                    • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                      • (integer) --
                    • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                    • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                    • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                    • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                    • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                    • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                    • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                    • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                    • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                    • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                    • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                    • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                    • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                    • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                    • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                    • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                    • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                  • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                      • (integer) --
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                    • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                    • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                    • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                    • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                    • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                    • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                    • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                    • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                  • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                    • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                    • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                    • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                  • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                    • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                  • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                    • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • MxfSettings (dict) -- These settings relate to your MXF output container.
                    • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                    • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                • OutputSettings (dict) -- Specific settings for this type of output.
                  • HlsSettings (dict) -- Settings for HLS output groups
                    • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                    • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                    • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                    • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                  • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                  • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                  • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                    • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                      • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                    • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                      • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                      • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                    • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                      • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                      • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                      • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                      • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                    • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                      • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                      • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                      • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                      • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                    • H265Settings (dict) -- Settings for H265 codec
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- H.265 Level.
                      • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                      • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                    • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                      • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                    • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                      • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                    • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                  • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                  • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                  • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                  • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                  • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                  • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                  • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                  • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                  • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                    • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                      • Brightness (integer) -- Brightness level.
                      • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                      • Contrast (integer) -- Contrast level.
                      • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                        • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                        • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                        • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                      • Hue (integer) -- Hue in degrees.
                      • Saturation (integer) -- Saturation level.
                    • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                      • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                      • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                      • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                    • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                      • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                        • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                        • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                      • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                      • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                    • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                        • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                          • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                          • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                          • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                          • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                          • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                          • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                          • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                          • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                          • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                          • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                          • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                    • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                      • FilterSettings (dict) -- Settings for a noise reducer filter
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                        • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                        • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                        • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                        • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                        • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                        • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                    • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                      • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                        • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                        • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                    • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                      • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                      • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                      • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                  • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
          • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
          • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
          • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
          • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
        • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
          • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
            • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
              • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
              • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
      • SimulateReservedQueue (string) -- Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need. When this is enabled, MediaConvert runs your job from an on-demand queue with similar performance to what you will see with one RTS in a reserved queue. This setting is disabled by default.
      • Status (string) -- A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
      • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
      • Timing (dict) -- Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
        • FinishTime (datetime) -- The time, in Unix epoch format, that the transcoding job finished
        • StartTime (datetime) -- The time, in Unix epoch format, that transcoding for the job began.
        • SubmitTime (datetime) -- The time, in Unix epoch format, that you submitted the job.
      • UserMetadata (dict) -- User-defined metadata that you want to associate with an MediaConvert job. You specify metadata in key/value pairs.
        • (string) --
          • (string) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
create_job_template(**kwargs)

Create a new job template. For information about job templates see the User Guide at http://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html

See also: AWS API Documentation

Request Syntax

response = client.create_job_template(
    AccelerationSettings={
        'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
    },
    Category='string',
    Description='string',
    HopDestinations=[
        {
            'Priority': 123,
            'Queue': 'string',
            'WaitMinutes': 123
        },
    ],
    Name='string',
    Priority=123,
    Queue='string',
    Settings={
        'AdAvailOffset': 123,
        'AvailBlanking': {
            'AvailBlankingImage': 'string'
        },
        'Esam': {
            'ManifestConfirmConditionNotification': {
                'MccXml': 'string'
            },
            'ResponseSignalPreroll': 123,
            'SignalProcessingNotification': {
                'SccXml': 'string'
            }
        },
        'Inputs': [
            {
                'AudioSelectorGroups': {
                    'string': {
                        'AudioSelectorNames': [
                            'string',
                        ]
                    }
                },
                'AudioSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                        'ExternalAudioFileInput': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'Offset': 123,
                        'Pids': [
                            123,
                        ],
                        'ProgramSelection': 123,
                        'RemixSettings': {
                            'ChannelMapping': {
                                'OutputChannels': [
                                    {
                                        'InputChannels': [
                                            123,
                                        ],
                                        'InputChannelsFineTune': [
                                            123.0,
                                        ]
                                    },
                                ]
                            },
                            'ChannelsIn': 123,
                            'ChannelsOut': 123
                        },
                        'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                        'Tracks': [
                            123,
                        ]
                    }
                },
                'CaptionSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'SourceSettings': {
                            'AncillarySourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'SourceAncillaryChannelNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'DvbSubSourceSettings': {
                                'Pid': 123
                            },
                            'EmbeddedSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Source608ChannelNumber': 123,
                                'Source608TrackNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'FileSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Framerate': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123
                                },
                                'SourceFile': 'string',
                                'TimeDelta': 123
                            },
                            'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                            'TeletextSourceSettings': {
                                'PageNumber': 'string'
                            },
                            'TrackSourceSettings': {
                                'TrackNumber': 123
                            }
                        }
                    }
                },
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DeblockFilter': 'ENABLED'|'DISABLED',
                'DenoiseFilter': 'ENABLED'|'DISABLED',
                'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                'FilterStrength': 123,
                'ImageInserter': {
                    'InsertableImages': [
                        {
                            'Duration': 123,
                            'FadeIn': 123,
                            'FadeOut': 123,
                            'Height': 123,
                            'ImageInserterInput': 'string',
                            'ImageX': 123,
                            'ImageY': 123,
                            'Layer': 123,
                            'Opacity': 123,
                            'StartTime': 'string',
                            'Width': 123
                        },
                    ]
                },
                'InputClippings': [
                    {
                        'EndTimecode': 'string',
                        'StartTimecode': 'string'
                    },
                ],
                'InputScanType': 'AUTO'|'PSF',
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'ProgramNumber': 123,
                'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'TimecodeStart': 'string',
                'VideoSelector': {
                    'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                    'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                    'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                    'Hdr10Metadata': {
                        'BluePrimaryX': 123,
                        'BluePrimaryY': 123,
                        'GreenPrimaryX': 123,
                        'GreenPrimaryY': 123,
                        'MaxContentLightLevel': 123,
                        'MaxFrameAverageLightLevel': 123,
                        'MaxLuminance': 123,
                        'MinLuminance': 123,
                        'RedPrimaryX': 123,
                        'RedPrimaryY': 123,
                        'WhitePointX': 123,
                        'WhitePointY': 123
                    },
                    'Pid': 123,
                    'ProgramNumber': 123,
                    'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                }
            },
        ],
        'MotionImageInserter': {
            'Framerate': {
                'FramerateDenominator': 123,
                'FramerateNumerator': 123
            },
            'Input': 'string',
            'InsertionMode': 'MOV'|'PNG',
            'Offset': {
                'ImageX': 123,
                'ImageY': 123
            },
            'Playback': 'ONCE'|'REPEAT',
            'StartTime': 'string'
        },
        'NielsenConfiguration': {
            'BreakoutCode': 123,
            'DistributorId': 'string'
        },
        'NielsenNonLinearWatermark': {
            'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
            'AdiFilename': 'string',
            'AssetId': 'string',
            'AssetName': 'string',
            'CbetSourceId': 'string',
            'EpisodeId': 'string',
            'MetadataDestination': 'string',
            'SourceId': 123,
            'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
            'TicServerUrl': 'string',
            'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
        },
        'OutputGroups': [
            {
                'AutomatedEncodingSettings': {
                    'AbrSettings': {
                        'MaxAbrBitrate': 123,
                        'MaxRenditions': 123,
                        'MinAbrBitrate': 123
                    }
                },
                'CustomName': 'string',
                'Name': 'string',
                'OutputGroupSettings': {
                    'CmafGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'BaseUrl': 'string',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'DashSignaledSystemIds': [
                                    'string',
                                ],
                                'HlsSignaledSystemIds': [
                                    'string',
                                ],
                                'ResourceId': 'string',
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'FragmentLength': 123,
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'WriteDashManifest': 'DISABLED'|'ENABLED',
                        'WriteHlsManifest': 'DISABLED'|'ENABLED',
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'DashIsoGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                        'BaseUrl': 'string',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'FileGroupSettings': {
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        }
                    },
                    'HlsGroupSettings': {
                        'AdMarkers': [
                            'ELEMENTAL'|'ELEMENTAL_SCTE35',
                        ],
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                        'BaseUrl': 'string',
                        'CaptionLanguageMappings': [
                            {
                                'CaptionChannel': 123,
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'OfflineEncrypted': 'ENABLED'|'DISABLED',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinFinalSegmentLength': 123.0,
                        'MinSegmentLength': 123,
                        'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                        'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                        'ProgramDateTimePeriod': 123,
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'SegmentsPerSubdirectory': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                        'TimedMetadataId3Period': 123,
                        'TimestampDeltaMilliseconds': 123
                    },
                    'MsSmoothGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'ManifestEncoding': 'UTF8'|'UTF16'
                    },
                    'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                },
                'Outputs': [
                    {
                        'AudioDescriptions': [
                            {
                                'AudioChannelTaggingSettings': {
                                    'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                },
                                'AudioNormalizationSettings': {
                                    'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                    'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                    'CorrectionGateLevel': 123,
                                    'LoudnessLogging': 'LOG'|'DONT_LOG',
                                    'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                    'TargetLkfs': 123.0
                                },
                                'AudioSourceName': 'string',
                                'AudioType': 123,
                                'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'CodecSettings': {
                                    'AacSettings': {
                                        'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                        'Bitrate': 123,
                                        'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                        'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                        'RateControlMode': 'CBR'|'VBR',
                                        'RawFormat': 'LATM_LOAS'|'NONE',
                                        'SampleRate': 123,
                                        'Specification': 'MPEG2'|'MPEG4',
                                        'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                    },
                                    'Ac3Settings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                        'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'SampleRate': 123
                                    },
                                    'AiffSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                    'Eac3AtmosSettings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN',
                                        'CodingMode': 'CODING_MODE_9_1_6',
                                        'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'SampleRate': 123,
                                        'SpeechThreshold': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Eac3Settings': {
                                        'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                        'DcFilter': 'ENABLED'|'DISABLED',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LfeControl': 'LFE'|'NO_LFE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                        'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                        'SampleRate': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                        'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Mp2Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Mp3Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'RateControlMode': 'CBR'|'VBR',
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'OpusSettings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'VorbisSettings': {
                                        'Channels': 123,
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'WavSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'Format': 'RIFF'|'RF64',
                                        'SampleRate': 123
                                    }
                                },
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'StreamName': 'string'
                            },
                        ],
                        'CaptionDescriptions': [
                            {
                                'CaptionSelectorName': 'string',
                                'CustomLanguageCode': 'string',
                                'DestinationSettings': {
                                    'BurninDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                    'DvbSubDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'EmbeddedDestinationSettings': {
                                        'Destination608ChannelNumber': 123,
                                        'Destination708ServiceNumber': 123
                                    },
                                    'ImscDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'SccDestinationSettings': {
                                        'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                    },
                                    'TeletextDestinationSettings': {
                                        'PageNumber': 'string',
                                        'PageTypes': [
                                            'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                        ]
                                    },
                                    'TtmlDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'WebvttDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    }
                                },
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'ContainerSettings': {
                            'CmfcSettings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioGroupId': 'string',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                            'F4vSettings': {
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                            },
                            'M2tsSettings': {
                                'AudioBufferModel': 'DVB'|'ATSC',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'Bitrate': 123,
                                'BufferModel': 'MULTIPLEX'|'NONE',
                                'DvbNitSettings': {
                                    'NetworkId': 123,
                                    'NetworkName': 'string',
                                    'NitInterval': 123
                                },
                                'DvbSdtSettings': {
                                    'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                    'SdtInterval': 123,
                                    'ServiceName': 'string',
                                    'ServiceProviderName': 'string'
                                },
                                'DvbSubPids': [
                                    123,
                                ],
                                'DvbTdtSettings': {
                                    'TdtInterval': 123
                                },
                                'DvbTeletextPid': 123,
                                'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                'FragmentTime': 123.0,
                                'MaxPcrInterval': 123,
                                'MinEbpInterval': 123,
                                'NielsenId3': 'INSERT'|'NONE',
                                'NullPacketBitrate': 123.0,
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'RateMode': 'VBR'|'CBR',
                                'Scte35Esam': {
                                    'Scte35EsamPid': 123
                                },
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                'SegmentationTime': 123.0,
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'M3u8Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'NielsenId3': 'INSERT'|'NONE',
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'MovSettings': {
                                'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                'PaddingControl': 'OMNEON'|'NONE',
                                'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                            },
                            'Mp4Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'CttsVersion': 123,
                                'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                'Mp4MajorBrand': 'string'
                            },
                            'MpdSettings': {
                                'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'MxfSettings': {
                                'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                'Profile': 'D_10'|'XDCAM'|'OP1A'
                            }
                        },
                        'Extension': 'string',
                        'NameModifier': 'string',
                        'OutputSettings': {
                            'HlsSettings': {
                                'AudioGroupId': 'string',
                                'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'SegmentModifier': 'string'
                            }
                        },
                        'Preset': 'string',
                        'VideoDescription': {
                            'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                            'AntiAlias': 'DISABLED'|'ENABLED',
                            'CodecSettings': {
                                'Av1Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'MaxBitrate': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'QvbrSettings': {
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'QVBR',
                                    'Slices': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'AvcIntraSettings': {
                                    'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                    'AvcIntraUhdSettings': {
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                    },
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                'FrameCaptureSettings': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'MaxCaptures': 123,
                                    'Quality': 123
                                },
                                'H264Settings': {
                                    'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                    'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'EntropyEncoding': 'CABAC'|'CAVLC',
                                    'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'RepeatPps': 'DISABLED'|'ENABLED',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'RP2027',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                },
                                'H265Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                    'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'TemporalIds': 'DISABLED'|'ENABLED',
                                    'Tiles': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                    'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                },
                                'Mpeg2Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                    'CodecProfile': 'MAIN'|'PROFILE_422',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                    'RateControlMode': 'VBR'|'CBR',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'D_10',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'ProresSettings': {
                                    'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Vc3Settings': {
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD',
                                    'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                },
                                'Vp8Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                },
                                'Vp9Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                }
                            },
                            'ColorMetadata': 'IGNORE'|'INSERT',
                            'Crop': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'DropFrameTimecode': 'DISABLED'|'ENABLED',
                            'FixedAfd': 123,
                            'Height': 123,
                            'Position': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                            'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                            'Sharpness': 123,
                            'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                            'VideoPreprocessors': {
                                'ColorCorrector': {
                                    'Brightness': 123,
                                    'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                    'Contrast': 123,
                                    'Hdr10Metadata': {
                                        'BluePrimaryX': 123,
                                        'BluePrimaryY': 123,
                                        'GreenPrimaryX': 123,
                                        'GreenPrimaryY': 123,
                                        'MaxContentLightLevel': 123,
                                        'MaxFrameAverageLightLevel': 123,
                                        'MaxLuminance': 123,
                                        'MinLuminance': 123,
                                        'RedPrimaryX': 123,
                                        'RedPrimaryY': 123,
                                        'WhitePointX': 123,
                                        'WhitePointY': 123
                                    },
                                    'Hue': 123,
                                    'Saturation': 123
                                },
                                'Deinterlacer': {
                                    'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                    'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                    'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                },
                                'DolbyVision': {
                                    'L6Metadata': {
                                        'MaxCll': 123,
                                        'MaxFall': 123
                                    },
                                    'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                    'Profile': 'PROFILE_5'
                                },
                                'ImageInserter': {
                                    'InsertableImages': [
                                        {
                                            'Duration': 123,
                                            'FadeIn': 123,
                                            'FadeOut': 123,
                                            'Height': 123,
                                            'ImageInserterInput': 'string',
                                            'ImageX': 123,
                                            'ImageY': 123,
                                            'Layer': 123,
                                            'Opacity': 123,
                                            'StartTime': 'string',
                                            'Width': 123
                                        },
                                    ]
                                },
                                'NoiseReducer': {
                                    'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                    'FilterSettings': {
                                        'Strength': 123
                                    },
                                    'SpatialFilterSettings': {
                                        'PostFilterSharpenStrength': 123,
                                        'Speed': 123,
                                        'Strength': 123
                                    },
                                    'TemporalFilterSettings': {
                                        'AggressiveMode': 123,
                                        'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                        'Speed': 123,
                                        'Strength': 123
                                    }
                                },
                                'PartnerWatermarking': {
                                    'NexguardFileMarkerSettings': {
                                        'License': 'string',
                                        'Payload': 123,
                                        'Preset': 'string',
                                        'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                    }
                                },
                                'TimecodeBurnin': {
                                    'FontSize': 123,
                                    'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                    'Prefix': 'string'
                                }
                            },
                            'Width': 123
                        }
                    },
                ]
            },
        ],
        'TimecodeConfig': {
            'Anchor': 'string',
            'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
            'Start': 'string',
            'TimestampOffset': 'string'
        },
        'TimedMetadataInsertion': {
            'Id3Insertions': [
                {
                    'Id3': 'string',
                    'Timecode': 'string'
                },
            ]
        }
    },
    StatusUpdateInterval='SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
    Tags={
        'string': 'string'
    }
)
Parameters
  • AccelerationSettings (dict) --

    Accelerated transcoding can significantly speed up jobs with long, visually complex content. Outputs that use this feature incur pro-tier pricing. For information about feature limitations, see the AWS Elemental MediaConvert User Guide.

    • Mode (string) -- [REQUIRED] Specify the conditions when the service will run your job with accelerated transcoding.
  • Category (string) -- Optional. A category for the job template you are creating
  • Description (string) -- Optional. A description of the job template you are creating.
  • HopDestinations (list) --

    Optional. Use queue hopping to avoid overly long waits in the backlog of the queue that you submit your job to. Specify an alternate queue and the maximum time that your job will wait in the initial queue before hopping. For more information about this feature, see the AWS Elemental MediaConvert User Guide.

    • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
      • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
      • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
      • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
  • Name (string) -- [REQUIRED] The name of the job template you are creating.
  • Priority (integer) -- Specify the relative priority for this job. In any given queue, the service begins processing the job with the highest value first. When more than one job has the same priority, the service begins processing the job that you submitted first. If you don't specify a priority, the service uses the default value 0.
  • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
  • Settings (dict) --

    [REQUIRED] JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.

    • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
    • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
      • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
    • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
        • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
      • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
      • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
        • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
    • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
      • (dict) -- Specified video input in a template.
        • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
          • (string) --
            • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                • (string) --
        • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
          • (string) --
            • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
              • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
              • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
              • LanguageCode (string) -- Selects a specific language code from within an audio source.
              • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
              • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                • (integer) --
              • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
              • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                  • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                    • (dict) -- OutputChannel mapping settings.
                      • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                        • (integer) --
                      • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                        • (float) --
                • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • SelectorType (string) -- Specifies the type of the audio selector.
              • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                • (integer) --
        • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
          • (string) --
            • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                  • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                  • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                    • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                    • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                  • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                  • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                  • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                  • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
        • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
        • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
        • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
        • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
        • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
          • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
            • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
              • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
              • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
              • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
              • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
              • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
              • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
              • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
              • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
              • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
              • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
              • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
        • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
          • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
            • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
            • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
        • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
        • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
        • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
        • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
          • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
          • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
          • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
          • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
            • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
            • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
            • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
          • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
          • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
          • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
    • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
      • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
        • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
        • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
      • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
      • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
      • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
        • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
        • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
      • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
      • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
    • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
      • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
      • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
    • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
      • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
      • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
      • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
      • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
      • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
      • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
      • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
      • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
      • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
      • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
      • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
    • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
      • (dict) -- Group of outputs
        • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
          • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
            • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
            • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
            • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
        • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
        • Name (string) -- Name of the output group
        • OutputGroupSettings (dict) -- Output Group settings, including type
          • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
              • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
              • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
              • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
            • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
            • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
          • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
          • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
          • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
            • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
              • (string) --
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
            • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
            • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
              • (dict) -- Caption Language Mapping
                • CaptionChannel (integer) -- Caption channel.
                • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                • LanguageDescription (string) -- Caption language description.
            • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
              • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
              • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
            • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
            • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
            • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
            • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
            • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
            • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
            • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
            • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
          • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
            • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
          • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
        • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
          • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
            • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
              • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                  • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                  • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                  • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                  • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                  • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                  • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                  • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                  • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                    • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                    • CodecProfile (string) -- AAC Profile.
                    • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                    • RateControlMode (string) -- Rate Control Mode.
                    • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                    • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                    • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                    • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                  • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                  • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                    • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                    • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                    • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                    • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                  • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                    • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                    • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                    • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                    • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                    • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                  • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                    • SampleRate (integer) -- Sample rate in hz.
                    • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                  • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                    • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                  • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                    • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                    • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                    • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                  • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                    • SampleRate (integer) -- Sample rate in Hz.
                • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                • RemixSettings (dict) -- Advanced audio remixing settings.
                  • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                    • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                      • (dict) -- OutputChannel mapping settings.
                        • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                          • (integer) --
                        • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                          • (float) --
                  • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
              • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                  • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                  • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                    • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                    • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                  • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                    • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                  • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                    • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                  • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                    • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                    • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                      • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                  • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                    • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                  • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                    • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • ContainerSettings (dict) -- Container specific settings.
              • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
              • F4vSettings (dict) -- Settings for F4v container
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
              • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                  • (integer) --
                • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                  • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                  • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                  • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                  • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                  • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                  • (integer) --
                • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                  • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
              • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                  • (integer) --
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
              • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
              • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
              • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • MxfSettings (dict) -- These settings relate to your MXF output container.
                • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
            • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
            • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
            • OutputSettings (dict) -- Specific settings for this type of output.
              • HlsSettings (dict) -- Settings for HLS output groups
                • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
            • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
            • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
              • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
              • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
              • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                  • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                  • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                  • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                    • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                  • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                  • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                  • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                  • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                  • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                  • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                  • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                  • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                • H265Settings (dict) -- Settings for H265 codec
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- H.265 Level.
                  • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                  • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                  • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                  • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                  • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                  • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
              • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
              • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
              • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
              • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
              • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
              • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
              • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                  • Brightness (integer) -- Brightness level.
                  • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                  • Contrast (integer) -- Contrast level.
                  • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                    • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                    • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                    • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • Hue (integer) -- Hue in degrees.
                  • Saturation (integer) -- Saturation level.
                • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                  • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                  • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                  • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                  • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                    • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                    • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                  • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                  • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                    • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                      • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                      • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                      • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                      • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                      • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                      • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                      • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                      • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                      • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                      • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                      • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                  • FilterSettings (dict) -- Settings for a noise reducer filter
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                    • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                    • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                    • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                    • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                    • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                    • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                  • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                    • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                    • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                  • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                  • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                  • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
              • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
    • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
      • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
      • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
      • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
      • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
    • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
      • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
        • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
          • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
          • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
  • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
  • Tags (dict) --

    The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'JobTemplate': {
        'AccelerationSettings': {
            'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
        },
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'HopDestinations': [
            {
                'Priority': 123,
                'Queue': 'string',
                'WaitMinutes': 123
            },
        ],
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Priority': 123,
        'Queue': 'string',
        'Settings': {
            'AdAvailOffset': 123,
            'AvailBlanking': {
                'AvailBlankingImage': 'string'
            },
            'Esam': {
                'ManifestConfirmConditionNotification': {
                    'MccXml': 'string'
                },
                'ResponseSignalPreroll': 123,
                'SignalProcessingNotification': {
                    'SccXml': 'string'
                }
            },
            'Inputs': [
                {
                    'AudioSelectorGroups': {
                        'string': {
                            'AudioSelectorNames': [
                                'string',
                            ]
                        }
                    },
                    'AudioSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                            'ExternalAudioFileInput': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'Offset': 123,
                            'Pids': [
                                123,
                            ],
                            'ProgramSelection': 123,
                            'RemixSettings': {
                                'ChannelMapping': {
                                    'OutputChannels': [
                                        {
                                            'InputChannels': [
                                                123,
                                            ],
                                            'InputChannelsFineTune': [
                                                123.0,
                                            ]
                                        },
                                    ]
                                },
                                'ChannelsIn': 123,
                                'ChannelsOut': 123
                            },
                            'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                            'Tracks': [
                                123,
                            ]
                        }
                    },
                    'CaptionSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'SourceSettings': {
                                'AncillarySourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'SourceAncillaryChannelNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'DvbSubSourceSettings': {
                                    'Pid': 123
                                },
                                'EmbeddedSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Source608ChannelNumber': 123,
                                    'Source608TrackNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'FileSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Framerate': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123
                                    },
                                    'SourceFile': 'string',
                                    'TimeDelta': 123
                                },
                                'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                'TeletextSourceSettings': {
                                    'PageNumber': 'string'
                                },
                                'TrackSourceSettings': {
                                    'TrackNumber': 123
                                }
                            }
                        }
                    },
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DeblockFilter': 'ENABLED'|'DISABLED',
                    'DenoiseFilter': 'ENABLED'|'DISABLED',
                    'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                    'FilterStrength': 123,
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'InputClippings': [
                        {
                            'EndTimecode': 'string',
                            'StartTimecode': 'string'
                        },
                    ],
                    'InputScanType': 'AUTO'|'PSF',
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'ProgramNumber': 123,
                    'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                    'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'TimecodeStart': 'string',
                    'VideoSelector': {
                        'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                        'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                        'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Pid': 123,
                        'ProgramNumber': 123,
                        'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                    }
                },
            ],
            'MotionImageInserter': {
                'Framerate': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123
                },
                'Input': 'string',
                'InsertionMode': 'MOV'|'PNG',
                'Offset': {
                    'ImageX': 123,
                    'ImageY': 123
                },
                'Playback': 'ONCE'|'REPEAT',
                'StartTime': 'string'
            },
            'NielsenConfiguration': {
                'BreakoutCode': 123,
                'DistributorId': 'string'
            },
            'NielsenNonLinearWatermark': {
                'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                'AdiFilename': 'string',
                'AssetId': 'string',
                'AssetName': 'string',
                'CbetSourceId': 'string',
                'EpisodeId': 'string',
                'MetadataDestination': 'string',
                'SourceId': 123,
                'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                'TicServerUrl': 'string',
                'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
            },
            'OutputGroups': [
                {
                    'AutomatedEncodingSettings': {
                        'AbrSettings': {
                            'MaxAbrBitrate': 123,
                            'MaxRenditions': 123,
                            'MinAbrBitrate': 123
                        }
                    },
                    'CustomName': 'string',
                    'Name': 'string',
                    'OutputGroupSettings': {
                        'CmafGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'BaseUrl': 'string',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'DashSignaledSystemIds': [
                                        'string',
                                    ],
                                    'HlsSignaledSystemIds': [
                                        'string',
                                    ],
                                    'ResourceId': 'string',
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'FragmentLength': 123,
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'WriteDashManifest': 'DISABLED'|'ENABLED',
                            'WriteHlsManifest': 'DISABLED'|'ENABLED',
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'DashIsoGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                            'BaseUrl': 'string',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'FileGroupSettings': {
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            }
                        },
                        'HlsGroupSettings': {
                            'AdMarkers': [
                                'ELEMENTAL'|'ELEMENTAL_SCTE35',
                            ],
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                            'BaseUrl': 'string',
                            'CaptionLanguageMappings': [
                                {
                                    'CaptionChannel': 123,
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinFinalSegmentLength': 123.0,
                            'MinSegmentLength': 123,
                            'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                            'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                            'ProgramDateTimePeriod': 123,
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'SegmentsPerSubdirectory': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                            'TimedMetadataId3Period': 123,
                            'TimestampDeltaMilliseconds': 123
                        },
                        'MsSmoothGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'ManifestEncoding': 'UTF8'|'UTF16'
                        },
                        'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                    },
                    'Outputs': [
                        {
                            'AudioDescriptions': [
                                {
                                    'AudioChannelTaggingSettings': {
                                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                    },
                                    'AudioNormalizationSettings': {
                                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                        'CorrectionGateLevel': 123,
                                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                        'TargetLkfs': 123.0
                                    },
                                    'AudioSourceName': 'string',
                                    'AudioType': 123,
                                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'CodecSettings': {
                                        'AacSettings': {
                                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                            'Bitrate': 123,
                                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                            'RateControlMode': 'CBR'|'VBR',
                                            'RawFormat': 'LATM_LOAS'|'NONE',
                                            'SampleRate': 123,
                                            'Specification': 'MPEG2'|'MPEG4',
                                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                        },
                                        'Ac3Settings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'SampleRate': 123
                                        },
                                        'AiffSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                        'Eac3AtmosSettings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN',
                                            'CodingMode': 'CODING_MODE_9_1_6',
                                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'SampleRate': 123,
                                            'SpeechThreshold': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Eac3Settings': {
                                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                            'DcFilter': 'ENABLED'|'DISABLED',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LfeControl': 'LFE'|'NO_LFE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                            'SampleRate': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Mp2Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Mp3Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'RateControlMode': 'CBR'|'VBR',
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'OpusSettings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'VorbisSettings': {
                                            'Channels': 123,
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'WavSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'Format': 'RIFF'|'RF64',
                                            'SampleRate': 123
                                        }
                                    },
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'RemixSettings': {
                                        'ChannelMapping': {
                                            'OutputChannels': [
                                                {
                                                    'InputChannels': [
                                                        123,
                                                    ],
                                                    'InputChannelsFineTune': [
                                                        123.0,
                                                    ]
                                                },
                                            ]
                                        },
                                        'ChannelsIn': 123,
                                        'ChannelsOut': 123
                                    },
                                    'StreamName': 'string'
                                },
                            ],
                            'CaptionDescriptions': [
                                {
                                    'CaptionSelectorName': 'string',
                                    'CustomLanguageCode': 'string',
                                    'DestinationSettings': {
                                        'BurninDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                        'DvbSubDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'EmbeddedDestinationSettings': {
                                            'Destination608ChannelNumber': 123,
                                            'Destination708ServiceNumber': 123
                                        },
                                        'ImscDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'SccDestinationSettings': {
                                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                        },
                                        'TeletextDestinationSettings': {
                                            'PageNumber': 'string',
                                            'PageTypes': [
                                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                            ]
                                        },
                                        'TtmlDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'WebvttDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        }
                                    },
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'ContainerSettings': {
                                'CmfcSettings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioGroupId': 'string',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                'F4vSettings': {
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                },
                                'M2tsSettings': {
                                    'AudioBufferModel': 'DVB'|'ATSC',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'Bitrate': 123,
                                    'BufferModel': 'MULTIPLEX'|'NONE',
                                    'DvbNitSettings': {
                                        'NetworkId': 123,
                                        'NetworkName': 'string',
                                        'NitInterval': 123
                                    },
                                    'DvbSdtSettings': {
                                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                        'SdtInterval': 123,
                                        'ServiceName': 'string',
                                        'ServiceProviderName': 'string'
                                    },
                                    'DvbSubPids': [
                                        123,
                                    ],
                                    'DvbTdtSettings': {
                                        'TdtInterval': 123
                                    },
                                    'DvbTeletextPid': 123,
                                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                    'FragmentTime': 123.0,
                                    'MaxPcrInterval': 123,
                                    'MinEbpInterval': 123,
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'NullPacketBitrate': 123.0,
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'RateMode': 'VBR'|'CBR',
                                    'Scte35Esam': {
                                        'Scte35EsamPid': 123
                                    },
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                    'SegmentationTime': 123.0,
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'M3u8Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'MovSettings': {
                                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                    'PaddingControl': 'OMNEON'|'NONE',
                                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                },
                                'Mp4Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'CttsVersion': 123,
                                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                    'Mp4MajorBrand': 'string'
                                },
                                'MpdSettings': {
                                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'MxfSettings': {
                                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                                }
                            },
                            'Extension': 'string',
                            'NameModifier': 'string',
                            'OutputSettings': {
                                'HlsSettings': {
                                    'AudioGroupId': 'string',
                                    'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'SegmentModifier': 'string'
                                }
                            },
                            'Preset': 'string',
                            'VideoDescription': {
                                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                'AntiAlias': 'DISABLED'|'ENABLED',
                                'CodecSettings': {
                                    'Av1Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'MaxBitrate': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'QvbrSettings': {
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'QVBR',
                                        'Slices': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'AvcIntraSettings': {
                                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                        'AvcIntraUhdSettings': {
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                        },
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                    'FrameCaptureSettings': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'MaxCaptures': 123,
                                        'Quality': 123
                                    },
                                    'H264Settings': {
                                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'EntropyEncoding': 'CABAC'|'CAVLC',
                                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'RepeatPps': 'DISABLED'|'ENABLED',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'RP2027',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                    },
                                    'H265Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'TemporalIds': 'DISABLED'|'ENABLED',
                                        'Tiles': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                    },
                                    'Mpeg2Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                        'CodecProfile': 'MAIN'|'PROFILE_422',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                        'RateControlMode': 'VBR'|'CBR',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'D_10',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'ProresSettings': {
                                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Vc3Settings': {
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD',
                                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                    },
                                    'Vp8Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    },
                                    'Vp9Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    }
                                },
                                'ColorMetadata': 'IGNORE'|'INSERT',
                                'Crop': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                'FixedAfd': 123,
                                'Height': 123,
                                'Position': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                'Sharpness': 123,
                                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                'VideoPreprocessors': {
                                    'ColorCorrector': {
                                        'Brightness': 123,
                                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                        'Contrast': 123,
                                        'Hdr10Metadata': {
                                            'BluePrimaryX': 123,
                                            'BluePrimaryY': 123,
                                            'GreenPrimaryX': 123,
                                            'GreenPrimaryY': 123,
                                            'MaxContentLightLevel': 123,
                                            'MaxFrameAverageLightLevel': 123,
                                            'MaxLuminance': 123,
                                            'MinLuminance': 123,
                                            'RedPrimaryX': 123,
                                            'RedPrimaryY': 123,
                                            'WhitePointX': 123,
                                            'WhitePointY': 123
                                        },
                                        'Hue': 123,
                                        'Saturation': 123
                                    },
                                    'Deinterlacer': {
                                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                    },
                                    'DolbyVision': {
                                        'L6Metadata': {
                                            'MaxCll': 123,
                                            'MaxFall': 123
                                        },
                                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                        'Profile': 'PROFILE_5'
                                    },
                                    'ImageInserter': {
                                        'InsertableImages': [
                                            {
                                                'Duration': 123,
                                                'FadeIn': 123,
                                                'FadeOut': 123,
                                                'Height': 123,
                                                'ImageInserterInput': 'string',
                                                'ImageX': 123,
                                                'ImageY': 123,
                                                'Layer': 123,
                                                'Opacity': 123,
                                                'StartTime': 'string',
                                                'Width': 123
                                            },
                                        ]
                                    },
                                    'NoiseReducer': {
                                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                        'FilterSettings': {
                                            'Strength': 123
                                        },
                                        'SpatialFilterSettings': {
                                            'PostFilterSharpenStrength': 123,
                                            'Speed': 123,
                                            'Strength': 123
                                        },
                                        'TemporalFilterSettings': {
                                            'AggressiveMode': 123,
                                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                            'Speed': 123,
                                            'Strength': 123
                                        }
                                    },
                                    'PartnerWatermarking': {
                                        'NexguardFileMarkerSettings': {
                                            'License': 'string',
                                            'Payload': 123,
                                            'Preset': 'string',
                                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                        }
                                    },
                                    'TimecodeBurnin': {
                                        'FontSize': 123,
                                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                        'Prefix': 'string'
                                    }
                                },
                                'Width': 123
                            }
                        },
                    ]
                },
            ],
            'TimecodeConfig': {
                'Anchor': 'string',
                'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'Start': 'string',
                'TimestampOffset': 'string'
            },
            'TimedMetadataInsertion': {
                'Id3Insertions': [
                    {
                        'Id3': 'string',
                        'Timecode': 'string'
                    },
                ]
            }
        },
        'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • JobTemplate (dict) -- A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
      • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
        • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your job templates.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for Job template creation.
      • Description (string) -- An optional description you create for each job template.
      • HopDestinations (list) -- Optional list of hop destinations.
        • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
          • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
          • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
          • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the Job template was last updated.
      • Name (string) -- A name you create for each job template. Each name must be unique within your account.
      • Priority (integer) -- Relative priority on the job.
      • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
      • Settings (dict) -- JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.
        • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
        • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
          • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
        • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
          • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
            • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
          • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
          • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
            • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
        • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
          • (dict) -- Specified video input in a template.
            • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • (string) --
                • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                  • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                    • (string) --
            • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • (string) --
                • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                  • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                  • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                  • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                  • LanguageCode (string) -- Selects a specific language code from within an audio source.
                  • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                  • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                    • (integer) --
                  • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                  • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                    • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                      • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                        • (dict) -- OutputChannel mapping settings.
                          • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                            • (integer) --
                          • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                            • (float) --
                    • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • SelectorType (string) -- Specifies the type of the audio selector.
                  • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                    • (integer) --
            • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • (string) --
                • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                  • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                    • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                      • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                    • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                      • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                        • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                        • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                      • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                      • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                    • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                    • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                      • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                    • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                      • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
            • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
            • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
            • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
            • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
              • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
            • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
            • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
            • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
              • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
              • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
              • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
              • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
              • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
              • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
        • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
          • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
            • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
            • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
          • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
          • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
          • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
            • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
            • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
          • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
          • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
        • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
          • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
          • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
        • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
          • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
          • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
          • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
          • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
          • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
          • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
          • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
          • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
          • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
          • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
          • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
        • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
          • (dict) -- Group of outputs
            • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
              • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
            • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
            • Name (string) -- Name of the output group
            • OutputGroupSettings (dict) -- Output Group settings, including type
              • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                  • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                  • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                  • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
              • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
              • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
              • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                  • (string) --
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                  • (dict) -- Caption Language Mapping
                    • CaptionChannel (integer) -- Caption channel.
                    • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                    • LanguageDescription (string) -- Caption language description.
                • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                  • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                  • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
              • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
              • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
            • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
              • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                  • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                    • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                      • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                    • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                      • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                      • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                      • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                      • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                      • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                      • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                    • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                    • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                    • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                    • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                      • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                        • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                        • CodecProfile (string) -- AAC Profile.
                        • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                        • RateControlMode (string) -- Rate Control Mode.
                        • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                        • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                        • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                        • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                      • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                      • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                      • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                        • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                        • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                        • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                        • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                      • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                        • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                        • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                        • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                        • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                        • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                      • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                        • SampleRate (integer) -- Sample rate in hz.
                        • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                      • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                        • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                      • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                        • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                        • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                        • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                      • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                        • SampleRate (integer) -- Sample rate in Hz.
                    • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                    • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                    • RemixSettings (dict) -- Advanced audio remixing settings.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                  • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                    • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                    • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                      • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                      • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                        • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                      • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                        • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                      • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                        • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                      • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                        • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                        • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                          • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                      • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                        • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                      • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                        • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                    • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                    • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • ContainerSettings (dict) -- Container specific settings.
                  • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                    • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                    • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                  • F4vSettings (dict) -- Settings for F4v container
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                  • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                    • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                      • (integer) --
                    • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                    • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                    • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                      • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                      • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                      • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                    • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                      • (integer) --
                    • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                    • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                    • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                    • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                    • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                    • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                    • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                    • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                    • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                    • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                    • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                    • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                    • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                    • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                    • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                    • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                    • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                  • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                      • (integer) --
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                    • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                    • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                    • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                    • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                    • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                    • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                    • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                    • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                  • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                    • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                    • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                    • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                  • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                    • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                  • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                    • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • MxfSettings (dict) -- These settings relate to your MXF output container.
                    • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                    • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                • OutputSettings (dict) -- Specific settings for this type of output.
                  • HlsSettings (dict) -- Settings for HLS output groups
                    • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                    • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                    • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                    • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                  • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                  • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                  • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                    • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                      • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                    • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                      • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                      • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                    • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                      • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                      • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                      • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                      • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                    • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                      • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                      • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                      • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                      • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                    • H265Settings (dict) -- Settings for H265 codec
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- H.265 Level.
                      • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                      • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                    • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                      • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                    • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                      • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                    • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                  • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                  • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                  • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                  • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                  • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                  • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                  • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                  • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                  • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                    • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                      • Brightness (integer) -- Brightness level.
                      • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                      • Contrast (integer) -- Contrast level.
                      • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                        • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                        • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                        • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                      • Hue (integer) -- Hue in degrees.
                      • Saturation (integer) -- Saturation level.
                    • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                      • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                      • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                      • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                    • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                      • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                        • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                        • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                      • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                      • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                    • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                        • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                          • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                          • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                          • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                          • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                          • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                          • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                          • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                          • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                          • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                          • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                          • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                    • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                      • FilterSettings (dict) -- Settings for a noise reducer filter
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                        • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                        • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                        • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                        • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                        • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                        • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                    • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                      • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                        • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                        • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                    • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                      • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                      • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                      • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                  • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
          • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
          • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
          • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
          • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
        • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
          • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
            • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
              • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
              • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
      • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
      • Type (string) -- A job template can be of two types: system or custom. System or built-in job templates can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
create_preset(**kwargs)

Create a new preset. For information about job templates see the User Guide at http://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html

See also: AWS API Documentation

Request Syntax

response = client.create_preset(
    Category='string',
    Description='string',
    Name='string',
    Settings={
        'AudioDescriptions': [
            {
                'AudioChannelTaggingSettings': {
                    'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                },
                'AudioNormalizationSettings': {
                    'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                    'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                    'CorrectionGateLevel': 123,
                    'LoudnessLogging': 'LOG'|'DONT_LOG',
                    'PeakCalculation': 'TRUE_PEAK'|'NONE',
                    'TargetLkfs': 123.0
                },
                'AudioSourceName': 'string',
                'AudioType': 123,
                'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                'CodecSettings': {
                    'AacSettings': {
                        'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                        'Bitrate': 123,
                        'CodecProfile': 'LC'|'HEV1'|'HEV2',
                        'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                        'RateControlMode': 'CBR'|'VBR',
                        'RawFormat': 'LATM_LOAS'|'NONE',
                        'SampleRate': 123,
                        'Specification': 'MPEG2'|'MPEG4',
                        'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                    },
                    'Ac3Settings': {
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                        'Dialnorm': 123,
                        'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                        'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                        'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                        'LfeFilter': 'ENABLED'|'DISABLED',
                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'SampleRate': 123
                    },
                    'AiffSettings': {
                        'BitDepth': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                    'Eac3AtmosSettings': {
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN',
                        'CodingMode': 'CODING_MODE_9_1_6',
                        'DialogueIntelligence': 'ENABLED'|'DISABLED',
                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'LoRoCenterMixLevel': 123.0,
                        'LoRoSurroundMixLevel': 123.0,
                        'LtRtCenterMixLevel': 123.0,
                        'LtRtSurroundMixLevel': 123.0,
                        'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                        'SampleRate': 123,
                        'SpeechThreshold': 123,
                        'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                    },
                    'Eac3Settings': {
                        'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                        'DcFilter': 'ENABLED'|'DISABLED',
                        'Dialnorm': 123,
                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'LfeControl': 'LFE'|'NO_LFE',
                        'LfeFilter': 'ENABLED'|'DISABLED',
                        'LoRoCenterMixLevel': 123.0,
                        'LoRoSurroundMixLevel': 123.0,
                        'LtRtCenterMixLevel': 123.0,
                        'LtRtSurroundMixLevel': 123.0,
                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                        'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                        'SampleRate': 123,
                        'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                        'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                    },
                    'Mp2Settings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'Mp3Settings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'RateControlMode': 'CBR'|'VBR',
                        'SampleRate': 123,
                        'VbrQuality': 123
                    },
                    'OpusSettings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'VorbisSettings': {
                        'Channels': 123,
                        'SampleRate': 123,
                        'VbrQuality': 123
                    },
                    'WavSettings': {
                        'BitDepth': 123,
                        'Channels': 123,
                        'Format': 'RIFF'|'RF64',
                        'SampleRate': 123
                    }
                },
                'CustomLanguageCode': 'string',
                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                'RemixSettings': {
                    'ChannelMapping': {
                        'OutputChannels': [
                            {
                                'InputChannels': [
                                    123,
                                ],
                                'InputChannelsFineTune': [
                                    123.0,
                                ]
                            },
                        ]
                    },
                    'ChannelsIn': 123,
                    'ChannelsOut': 123
                },
                'StreamName': 'string'
            },
        ],
        'CaptionDescriptions': [
            {
                'CustomLanguageCode': 'string',
                'DestinationSettings': {
                    'BurninDestinationSettings': {
                        'Alignment': 'CENTERED'|'LEFT',
                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                        'BackgroundOpacity': 123,
                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'FontOpacity': 123,
                        'FontResolution': 123,
                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                        'FontSize': 123,
                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'OutlineSize': 123,
                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                        'ShadowOpacity': 123,
                        'ShadowXOffset': 123,
                        'ShadowYOffset': 123,
                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                        'XPosition': 123,
                        'YPosition': 123
                    },
                    'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                    'DvbSubDestinationSettings': {
                        'Alignment': 'CENTERED'|'LEFT',
                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                        'BackgroundOpacity': 123,
                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'FontOpacity': 123,
                        'FontResolution': 123,
                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                        'FontSize': 123,
                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'OutlineSize': 123,
                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                        'ShadowOpacity': 123,
                        'ShadowXOffset': 123,
                        'ShadowYOffset': 123,
                        'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                        'XPosition': 123,
                        'YPosition': 123
                    },
                    'EmbeddedDestinationSettings': {
                        'Destination608ChannelNumber': 123,
                        'Destination708ServiceNumber': 123
                    },
                    'ImscDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    },
                    'SccDestinationSettings': {
                        'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                    },
                    'TeletextDestinationSettings': {
                        'PageNumber': 'string',
                        'PageTypes': [
                            'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                        ]
                    },
                    'TtmlDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    },
                    'WebvttDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    }
                },
                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                'LanguageDescription': 'string'
            },
        ],
        'ContainerSettings': {
            'CmfcSettings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioGroupId': 'string',
                'AudioRenditionSets': 'string',
                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                'Scte35Esam': 'INSERT'|'NONE',
                'Scte35Source': 'PASSTHROUGH'|'NONE'
            },
            'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
            'F4vSettings': {
                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
            },
            'M2tsSettings': {
                'AudioBufferModel': 'DVB'|'ATSC',
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioFramesPerPes': 123,
                'AudioPids': [
                    123,
                ],
                'Bitrate': 123,
                'BufferModel': 'MULTIPLEX'|'NONE',
                'DvbNitSettings': {
                    'NetworkId': 123,
                    'NetworkName': 'string',
                    'NitInterval': 123
                },
                'DvbSdtSettings': {
                    'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                    'SdtInterval': 123,
                    'ServiceName': 'string',
                    'ServiceProviderName': 'string'
                },
                'DvbSubPids': [
                    123,
                ],
                'DvbTdtSettings': {
                    'TdtInterval': 123
                },
                'DvbTeletextPid': 123,
                'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                'FragmentTime': 123.0,
                'MaxPcrInterval': 123,
                'MinEbpInterval': 123,
                'NielsenId3': 'INSERT'|'NONE',
                'NullPacketBitrate': 123.0,
                'PatInterval': 123,
                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                'PcrPid': 123,
                'PmtInterval': 123,
                'PmtPid': 123,
                'PrivateMetadataPid': 123,
                'ProgramNumber': 123,
                'RateMode': 'VBR'|'CBR',
                'Scte35Esam': {
                    'Scte35EsamPid': 123
                },
                'Scte35Pid': 123,
                'Scte35Source': 'PASSTHROUGH'|'NONE',
                'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                'SegmentationTime': 123.0,
                'TimedMetadataPid': 123,
                'TransportStreamId': 123,
                'VideoPid': 123
            },
            'M3u8Settings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioFramesPerPes': 123,
                'AudioPids': [
                    123,
                ],
                'NielsenId3': 'INSERT'|'NONE',
                'PatInterval': 123,
                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                'PcrPid': 123,
                'PmtInterval': 123,
                'PmtPid': 123,
                'PrivateMetadataPid': 123,
                'ProgramNumber': 123,
                'Scte35Pid': 123,
                'Scte35Source': 'PASSTHROUGH'|'NONE',
                'TimedMetadata': 'PASSTHROUGH'|'NONE',
                'TimedMetadataPid': 123,
                'TransportStreamId': 123,
                'VideoPid': 123
            },
            'MovSettings': {
                'ClapAtom': 'INCLUDE'|'EXCLUDE',
                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                'PaddingControl': 'OMNEON'|'NONE',
                'Reference': 'SELF_CONTAINED'|'EXTERNAL'
            },
            'Mp4Settings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                'CttsVersion': 123,
                'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                'Mp4MajorBrand': 'string'
            },
            'MpdSettings': {
                'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                'Scte35Esam': 'INSERT'|'NONE',
                'Scte35Source': 'PASSTHROUGH'|'NONE'
            },
            'MxfSettings': {
                'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                'Profile': 'D_10'|'XDCAM'|'OP1A'
            }
        },
        'VideoDescription': {
            'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
            'AntiAlias': 'DISABLED'|'ENABLED',
            'CodecSettings': {
                'Av1Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'MaxBitrate': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'QvbrSettings': {
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'QVBR',
                    'Slices': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                },
                'AvcIntraSettings': {
                    'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                    'AvcIntraUhdSettings': {
                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                    },
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD'
                },
                'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                'FrameCaptureSettings': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'MaxCaptures': 123,
                    'Quality': 123
                },
                'H264Settings': {
                    'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                    'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'EntropyEncoding': 'CABAC'|'CAVLC',
                    'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopBReference': 'DISABLED'|'ENABLED',
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'NumberReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                    'QvbrSettings': {
                        'MaxAverageBitrate': 123,
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                    'RepeatPps': 'DISABLED'|'ENABLED',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                    'Slices': 123,
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Softness': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Syntax': 'DEFAULT'|'RP2027',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                },
                'H265Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                    'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopBReference': 'DISABLED'|'ENABLED',
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'NumberReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                    'QvbrSettings': {
                        'MaxAverageBitrate': 123,
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                    'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                    'Slices': 123,
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'TemporalIds': 'DISABLED'|'ENABLED',
                    'Tiles': 'DISABLED'|'ENABLED',
                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                    'WriteMp4PackagingType': 'HVC1'|'HEV1'
                },
                'Mpeg2Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                    'CodecProfile': 'MAIN'|'PROFILE_422',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                    'RateControlMode': 'VBR'|'CBR',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Softness': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Syntax': 'DEFAULT'|'D_10',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                },
                'ProresSettings': {
                    'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD'
                },
                'Vc3Settings': {
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD',
                    'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                },
                'Vp8Settings': {
                    'Bitrate': 123,
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'HrdBufferSize': 123,
                    'MaxBitrate': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                    'RateControlMode': 'VBR'
                },
                'Vp9Settings': {
                    'Bitrate': 123,
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'HrdBufferSize': 123,
                    'MaxBitrate': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                    'RateControlMode': 'VBR'
                }
            },
            'ColorMetadata': 'IGNORE'|'INSERT',
            'Crop': {
                'Height': 123,
                'Width': 123,
                'X': 123,
                'Y': 123
            },
            'DropFrameTimecode': 'DISABLED'|'ENABLED',
            'FixedAfd': 123,
            'Height': 123,
            'Position': {
                'Height': 123,
                'Width': 123,
                'X': 123,
                'Y': 123
            },
            'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
            'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
            'Sharpness': 123,
            'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
            'VideoPreprocessors': {
                'ColorCorrector': {
                    'Brightness': 123,
                    'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                    'Contrast': 123,
                    'Hdr10Metadata': {
                        'BluePrimaryX': 123,
                        'BluePrimaryY': 123,
                        'GreenPrimaryX': 123,
                        'GreenPrimaryY': 123,
                        'MaxContentLightLevel': 123,
                        'MaxFrameAverageLightLevel': 123,
                        'MaxLuminance': 123,
                        'MinLuminance': 123,
                        'RedPrimaryX': 123,
                        'RedPrimaryY': 123,
                        'WhitePointX': 123,
                        'WhitePointY': 123
                    },
                    'Hue': 123,
                    'Saturation': 123
                },
                'Deinterlacer': {
                    'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                    'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                    'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                },
                'DolbyVision': {
                    'L6Metadata': {
                        'MaxCll': 123,
                        'MaxFall': 123
                    },
                    'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                    'Profile': 'PROFILE_5'
                },
                'ImageInserter': {
                    'InsertableImages': [
                        {
                            'Duration': 123,
                            'FadeIn': 123,
                            'FadeOut': 123,
                            'Height': 123,
                            'ImageInserterInput': 'string',
                            'ImageX': 123,
                            'ImageY': 123,
                            'Layer': 123,
                            'Opacity': 123,
                            'StartTime': 'string',
                            'Width': 123
                        },
                    ]
                },
                'NoiseReducer': {
                    'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                    'FilterSettings': {
                        'Strength': 123
                    },
                    'SpatialFilterSettings': {
                        'PostFilterSharpenStrength': 123,
                        'Speed': 123,
                        'Strength': 123
                    },
                    'TemporalFilterSettings': {
                        'AggressiveMode': 123,
                        'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                        'Speed': 123,
                        'Strength': 123
                    }
                },
                'PartnerWatermarking': {
                    'NexguardFileMarkerSettings': {
                        'License': 'string',
                        'Payload': 123,
                        'Preset': 'string',
                        'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                    }
                },
                'TimecodeBurnin': {
                    'FontSize': 123,
                    'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                    'Prefix': 'string'
                }
            },
            'Width': 123
        }
    },
    Tags={
        'string': 'string'
    }
)
Parameters
  • Category (string) -- Optional. A category for the preset you are creating.
  • Description (string) -- Optional. A description of the preset you are creating.
  • Name (string) -- [REQUIRED] The name of the preset you are creating.
  • Settings (dict) --

    [REQUIRED] Settings for preset

    • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
      • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
        • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
          • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
        • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
          • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
          • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
          • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
          • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
          • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
          • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
        • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
        • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
        • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
        • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
          • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
            • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
            • CodecProfile (string) -- AAC Profile.
            • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
            • RateControlMode (string) -- Rate Control Mode.
            • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
            • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
            • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
            • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
          • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
            • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
            • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
            • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
            • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
            • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
          • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
            • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
            • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
            • SampleRate (integer) -- Sample rate in hz.
          • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
          • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
            • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
            • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
            • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
            • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
            • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
            • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
            • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
            • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
            • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
            • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
            • StereoDownmix (string) -- Choose how the service does stereo downmixing.
            • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
          • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
            • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
            • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
            • DcFilter (string) -- Activates a DC highpass filter for all input channels.
            • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
            • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
            • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
            • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
            • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
            • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
            • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
            • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
            • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
            • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
            • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
            • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
            • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
          • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
            • Bitrate (integer) -- Specify the average bitrate in bits per second.
            • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
            • SampleRate (integer) -- Sample rate in hz.
          • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
            • Bitrate (integer) -- Specify the average bitrate in bits per second.
            • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
            • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
            • SampleRate (integer) -- Sample rate in hz.
            • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
          • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
            • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
            • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
            • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
          • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
            • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
            • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
            • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
          • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
            • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
            • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
            • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
            • SampleRate (integer) -- Sample rate in Hz.
        • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
        • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
        • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
        • RemixSettings (dict) -- Advanced audio remixing settings.
          • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
            • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
              • (dict) -- OutputChannel mapping settings.
                • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                  • (integer) --
                • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                  • (float) --
          • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
          • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
        • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
    • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
      • (dict) -- Caption Description for preset
        • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
        • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
          • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
            • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
            • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
            • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
            • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
            • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
            • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
            • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
            • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
            • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
            • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
          • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
          • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
            • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
            • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
            • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
            • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
            • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
            • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
            • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
            • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
            • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
            • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
            • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
          • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
            • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
            • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
          • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
            • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
          • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
            • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
          • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
            • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
            • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
              • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
          • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
            • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
          • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
            • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
        • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
        • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
    • ContainerSettings (dict) -- Container specific settings.
      • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
        • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
        • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
        • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
        • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
        • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
        • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
      • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
      • F4vSettings (dict) -- Settings for F4v container
        • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
      • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
        • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
        • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
          • (integer) --
        • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
        • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
        • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
          • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
          • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
          • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
          • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
          • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
        • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
          • (integer) --
        • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
        • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
        • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
        • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
        • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
        • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
        • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
        • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
        • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
        • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
        • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
        • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
        • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
        • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
        • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
        • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
        • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
        • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
          • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
        • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
        • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
        • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
        • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
        • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
        • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
        • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
        • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
      • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
        • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
          • (integer) --
        • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
        • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
        • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
        • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
        • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
        • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
        • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
        • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
        • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
        • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
        • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
        • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
      • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
        • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
        • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
        • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
        • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
        • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
      • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
        • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
        • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
        • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
        • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
      • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
        • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
        • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
        • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
      • MxfSettings (dict) -- These settings relate to your MXF output container.
        • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
        • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
    • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
      • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
      • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
      • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
        • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
          • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
        • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
          • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
          • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
            • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
        • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
        • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
          • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
          • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
          • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
          • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
        • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
          • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
          • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
          • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
          • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
          • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
          • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
          • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
        • H265Settings (dict) -- Settings for H265 codec
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
          • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- H.265 Level.
          • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
          • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
          • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
          • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
          • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
          • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
          • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
          • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
          • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
        • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
          • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
          • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
        • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
          • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
        • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
        • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
          • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
          • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
          • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
        • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
          • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
          • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
      • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
      • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
        • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
        • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
        • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
        • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
      • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
      • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
      • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
      • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
        • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
        • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
        • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
        • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
      • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
      • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
      • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
      • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
      • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
        • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
          • Brightness (integer) -- Brightness level.
          • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
          • Contrast (integer) -- Contrast level.
          • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
            • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
            • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
            • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
          • Hue (integer) -- Hue in degrees.
          • Saturation (integer) -- Saturation level.
        • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
          • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
          • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
          • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
        • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
          • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
            • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
            • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
          • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
          • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
        • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
          • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
            • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
              • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
              • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
              • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
              • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
              • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
              • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
              • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
              • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
              • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
              • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
              • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
        • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
          • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
          • FilterSettings (dict) -- Settings for a noise reducer filter
            • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
          • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
            • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
            • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
            • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
          • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
            • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
            • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
            • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
            • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
        • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
          • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
            • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
            • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
            • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
            • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
        • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
          • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
          • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
          • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
      • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
  • Tags (dict) --

    The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'Preset': {
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Settings': {
            'AudioDescriptions': [
                {
                    'AudioChannelTaggingSettings': {
                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                    },
                    'AudioNormalizationSettings': {
                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                        'CorrectionGateLevel': 123,
                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                        'TargetLkfs': 123.0
                    },
                    'AudioSourceName': 'string',
                    'AudioType': 123,
                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'CodecSettings': {
                        'AacSettings': {
                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                            'Bitrate': 123,
                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                            'RateControlMode': 'CBR'|'VBR',
                            'RawFormat': 'LATM_LOAS'|'NONE',
                            'SampleRate': 123,
                            'Specification': 'MPEG2'|'MPEG4',
                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                        },
                        'Ac3Settings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'SampleRate': 123
                        },
                        'AiffSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                        'Eac3AtmosSettings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN',
                            'CodingMode': 'CODING_MODE_9_1_6',
                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                            'SampleRate': 123,
                            'SpeechThreshold': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Eac3Settings': {
                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                            'DcFilter': 'ENABLED'|'DISABLED',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LfeControl': 'LFE'|'NO_LFE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                            'SampleRate': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Mp2Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Mp3Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'RateControlMode': 'CBR'|'VBR',
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'OpusSettings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'VorbisSettings': {
                            'Channels': 123,
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'WavSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'Format': 'RIFF'|'RF64',
                            'SampleRate': 123
                        }
                    },
                    'CustomLanguageCode': 'string',
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'RemixSettings': {
                        'ChannelMapping': {
                            'OutputChannels': [
                                {
                                    'InputChannels': [
                                        123,
                                    ],
                                    'InputChannelsFineTune': [
                                        123.0,
                                    ]
                                },
                            ]
                        },
                        'ChannelsIn': 123,
                        'ChannelsOut': 123
                    },
                    'StreamName': 'string'
                },
            ],
            'CaptionDescriptions': [
                {
                    'CustomLanguageCode': 'string',
                    'DestinationSettings': {
                        'BurninDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                        'DvbSubDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'EmbeddedDestinationSettings': {
                            'Destination608ChannelNumber': 123,
                            'Destination708ServiceNumber': 123
                        },
                        'ImscDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'SccDestinationSettings': {
                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                        },
                        'TeletextDestinationSettings': {
                            'PageNumber': 'string',
                            'PageTypes': [
                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                            ]
                        },
                        'TtmlDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'WebvttDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        }
                    },
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageDescription': 'string'
                },
            ],
            'ContainerSettings': {
                'CmfcSettings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioGroupId': 'string',
                    'AudioRenditionSets': 'string',
                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                'F4vSettings': {
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                },
                'M2tsSettings': {
                    'AudioBufferModel': 'DVB'|'ATSC',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'Bitrate': 123,
                    'BufferModel': 'MULTIPLEX'|'NONE',
                    'DvbNitSettings': {
                        'NetworkId': 123,
                        'NetworkName': 'string',
                        'NitInterval': 123
                    },
                    'DvbSdtSettings': {
                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                        'SdtInterval': 123,
                        'ServiceName': 'string',
                        'ServiceProviderName': 'string'
                    },
                    'DvbSubPids': [
                        123,
                    ],
                    'DvbTdtSettings': {
                        'TdtInterval': 123
                    },
                    'DvbTeletextPid': 123,
                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                    'FragmentTime': 123.0,
                    'MaxPcrInterval': 123,
                    'MinEbpInterval': 123,
                    'NielsenId3': 'INSERT'|'NONE',
                    'NullPacketBitrate': 123.0,
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'RateMode': 'VBR'|'CBR',
                    'Scte35Esam': {
                        'Scte35EsamPid': 123
                    },
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                    'SegmentationTime': 123.0,
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'M3u8Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'NielsenId3': 'INSERT'|'NONE',
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'MovSettings': {
                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                    'PaddingControl': 'OMNEON'|'NONE',
                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                },
                'Mp4Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'CttsVersion': 123,
                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                    'Mp4MajorBrand': 'string'
                },
                'MpdSettings': {
                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'MxfSettings': {
                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                }
            },
            'VideoDescription': {
                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                'AntiAlias': 'DISABLED'|'ENABLED',
                'CodecSettings': {
                    'Av1Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'MaxBitrate': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'QvbrSettings': {
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'QVBR',
                        'Slices': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'AvcIntraSettings': {
                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                        'AvcIntraUhdSettings': {
                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                        },
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                    'FrameCaptureSettings': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'MaxCaptures': 123,
                        'Quality': 123
                    },
                    'H264Settings': {
                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'EntropyEncoding': 'CABAC'|'CAVLC',
                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'RepeatPps': 'DISABLED'|'ENABLED',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'RP2027',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                    },
                    'H265Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'TemporalIds': 'DISABLED'|'ENABLED',
                        'Tiles': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                    },
                    'Mpeg2Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                        'CodecProfile': 'MAIN'|'PROFILE_422',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                        'RateControlMode': 'VBR'|'CBR',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'D_10',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'ProresSettings': {
                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Vc3Settings': {
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD',
                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                    },
                    'Vp8Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    },
                    'Vp9Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    }
                },
                'ColorMetadata': 'IGNORE'|'INSERT',
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                'FixedAfd': 123,
                'Height': 123,
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                'Sharpness': 123,
                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                'VideoPreprocessors': {
                    'ColorCorrector': {
                        'Brightness': 123,
                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                        'Contrast': 123,
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Hue': 123,
                        'Saturation': 123
                    },
                    'Deinterlacer': {
                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                    },
                    'DolbyVision': {
                        'L6Metadata': {
                            'MaxCll': 123,
                            'MaxFall': 123
                        },
                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                        'Profile': 'PROFILE_5'
                    },
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'NoiseReducer': {
                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                        'FilterSettings': {
                            'Strength': 123
                        },
                        'SpatialFilterSettings': {
                            'PostFilterSharpenStrength': 123,
                            'Speed': 123,
                            'Strength': 123
                        },
                        'TemporalFilterSettings': {
                            'AggressiveMode': 123,
                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                            'Speed': 123,
                            'Strength': 123
                        }
                    },
                    'PartnerWatermarking': {
                        'NexguardFileMarkerSettings': {
                            'License': 'string',
                            'Payload': 123,
                            'Preset': 'string',
                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                        }
                    },
                    'TimecodeBurnin': {
                        'FontSize': 123,
                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                        'Prefix': 'string'
                    }
                },
                'Width': 123
            }
        },
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Preset (dict) -- A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your presets.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for preset creation.
      • Description (string) -- An optional description you create for each preset.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the preset was last updated.
      • Name (string) -- A name you create for each preset. Each name must be unique within your account.
      • Settings (dict) -- Settings for preset
        • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
          • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
            • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
              • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
            • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
              • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
              • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
              • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
              • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
              • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
              • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
            • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
            • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
            • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
            • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
              • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                • CodecProfile (string) -- AAC Profile.
                • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                • RateControlMode (string) -- Rate Control Mode.
                • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
              • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
              • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • SampleRate (integer) -- Sample rate in hz.
              • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
              • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
              • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
              • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Sample rate in hz.
              • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                • SampleRate (integer) -- Sample rate in hz.
                • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
              • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
              • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
              • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                • SampleRate (integer) -- Sample rate in Hz.
            • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
            • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
            • RemixSettings (dict) -- Advanced audio remixing settings.
              • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                  • (dict) -- OutputChannel mapping settings.
                    • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                      • (integer) --
                    • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                      • (float) --
              • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
            • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
          • (dict) -- Caption Description for preset
            • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
              • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
              • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
              • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
              • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
              • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                  • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
              • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
              • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
            • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
            • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • ContainerSettings (dict) -- Container specific settings.
          • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
            • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
            • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
            • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
            • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
          • F4vSettings (dict) -- Settings for F4v container
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
          • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
            • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
              • (integer) --
            • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
            • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
            • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
              • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
              • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
              • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
              • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
            • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
              • (integer) --
            • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
            • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
            • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
            • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
            • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
            • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
            • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
            • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
            • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
            • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
            • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
            • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
            • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
            • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
            • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
            • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
            • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
          • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
              • (integer) --
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
            • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
            • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
            • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
            • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
            • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
            • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
            • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
            • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
          • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
            • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
            • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
            • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
          • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
            • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
            • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
          • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
            • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • MxfSettings (dict) -- These settings relate to your MXF output container.
            • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
            • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
        • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
          • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
          • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
          • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
            • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
              • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
            • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
              • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
              • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
            • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
              • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
              • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
              • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
              • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
            • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
              • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
              • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
              • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
              • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
            • H265Settings (dict) -- Settings for H265 codec
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- H.265 Level.
              • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
              • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
              • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
              • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
            • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
              • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
            • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
              • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
            • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
            • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
          • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
          • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
          • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
          • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
          • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
          • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
          • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
          • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
          • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
            • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
              • Brightness (integer) -- Brightness level.
              • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
              • Contrast (integer) -- Contrast level.
              • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Hue (integer) -- Hue in degrees.
              • Saturation (integer) -- Saturation level.
            • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
              • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
              • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
              • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
            • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
              • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
              • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
              • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
            • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
              • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
              • FilterSettings (dict) -- Settings for a noise reducer filter
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
            • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
              • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
            • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
              • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
              • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
              • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
          • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
      • Type (string) -- A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
create_queue(**kwargs)

Create a new transcoding queue. For information about queues, see Working With Queues in the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html

See also: AWS API Documentation

Request Syntax

response = client.create_queue(
    Description='string',
    Name='string',
    PricingPlan='ON_DEMAND'|'RESERVED',
    ReservationPlanSettings={
        'Commitment': 'ONE_YEAR',
        'RenewalType': 'AUTO_RENEW'|'EXPIRE',
        'ReservedSlots': 123
    },
    Status='ACTIVE'|'PAUSED',
    Tags={
        'string': 'string'
    }
)
Parameters
  • Description (string) -- Optional. A description of the queue that you are creating.
  • Name (string) -- [REQUIRED] The name of the queue that you are creating.
  • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment. When you use the API to create a queue, the default is on-demand.
  • ReservationPlanSettings (dict) --

    Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.

    • Commitment (string) -- [REQUIRED] The length of the term of your reserved queue pricing plan commitment.
    • RenewalType (string) -- [REQUIRED] Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term. When your term is auto renewed, you extend your commitment by 12 months from the auto renew date. You can cancel this commitment.
    • ReservedSlots (integer) -- [REQUIRED] Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. You can't decrease the number of RTS in your reserved queue. You can increase the number of RTS by extending your existing commitment with a new 12-month commitment for the larger number. The new commitment begins when you purchase the additional capacity. You can't cancel your commitment or revert to your original commitment after you increase the capacity.
  • Status (string) -- Initial state of the queue. If you create a paused queue, then jobs in that queue won't begin.
  • Tags (dict) --

    The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{
    'Queue': {
        'Arn': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'PricingPlan': 'ON_DEMAND'|'RESERVED',
        'ProgressingJobsCount': 123,
        'ReservationPlan': {
            'Commitment': 'ONE_YEAR',
            'ExpiresAt': datetime(2015, 1, 1),
            'PurchasedAt': datetime(2015, 1, 1),
            'RenewalType': 'AUTO_RENEW'|'EXPIRE',
            'ReservedSlots': 123,
            'Status': 'ACTIVE'|'EXPIRED'
        },
        'Status': 'ACTIVE'|'PAUSED',
        'SubmittedJobsCount': 123,
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Queue (dict) -- You can use queues to manage the resources that are available to your AWS account for running multiple transcoding jobs at the same time. If you don't specify a queue, the service sends all jobs through the default queue. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for when you created the queue.
      • Description (string) -- An optional description that you create for each queue.
      • LastUpdated (datetime) -- The timestamp in epoch seconds for when you most recently updated the queue.
      • Name (string) -- A name that you create for each queue. Each name must be unique within your account.
      • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment.
      • ProgressingJobsCount (integer) -- The estimated number of jobs with a PROGRESSING status.
      • ReservationPlan (dict) -- Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.
        • Commitment (string) -- The length of the term of your reserved queue pricing plan commitment.
        • ExpiresAt (datetime) -- The timestamp in epoch seconds for when the current pricing plan term for this reserved queue expires.
        • PurchasedAt (datetime) -- The timestamp in epoch seconds for when you set up the current pricing plan for this reserved queue.
        • RenewalType (string) -- Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term.
        • ReservedSlots (integer) -- Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. When you increase this number, you extend your existing commitment with a new 12-month commitment for a larger number of RTS. The new commitment begins when you purchase the additional capacity. You can't decrease the number of RTS in your reserved queue.
        • Status (string) -- Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
      • Status (string) -- Queues can be ACTIVE or PAUSED. If you pause a queue, the service won't begin processing jobs in that queue. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
      • SubmittedJobsCount (integer) -- The estimated number of jobs with a SUBMITTED status.
      • Type (string) -- Specifies whether this on-demand queue is system or custom. System queues are built in. You can't modify or delete system queues. You can create and modify custom queues.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
delete_job_template(**kwargs)

Permanently delete a job template you have created.

See also: AWS API Documentation

Request Syntax

response = client.delete_job_template(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the job template to be deleted.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
delete_preset(**kwargs)

Permanently delete a preset you have created.

See also: AWS API Documentation

Request Syntax

response = client.delete_preset(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the preset to be deleted.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
delete_queue(**kwargs)

Permanently delete a queue you have created.

See also: AWS API Documentation

Request Syntax

response = client.delete_queue(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the queue that you want to delete.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
describe_endpoints(**kwargs)

Send an request with an empty body to the regional API endpoint to get your account API endpoint.

See also: AWS API Documentation

Request Syntax

response = client.describe_endpoints(
    MaxResults=123,
    Mode='DEFAULT'|'GET_ONLY',
    NextToken='string'
)
Parameters
  • MaxResults (integer) -- Optional. Max number of endpoints, up to twenty, that will be returned at one time.
  • Mode (string) -- Optional field, defaults to DEFAULT. Specify DEFAULT for this operation to return your endpoints if any exist, or to create an endpoint for you and return it if one doesn't already exist. Specify GET_ONLY to return your endpoints if any exist, or an empty list if none exist.
  • NextToken (string) -- Use this string, provided with the response to a previous request, to request the next batch of endpoints.
Return type

dict

Returns

Response Syntax

{
    'Endpoints': [
        {
            'Url': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • Endpoints (list) -- List of endpoints
      • (dict) -- Describes an account-specific API endpoint.
        • Url (string) -- URL of endpoint
    • NextToken (string) -- Use this string to request the next batch of endpoints.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
disassociate_certificate(**kwargs)

Removes an association between the Amazon Resource Name (ARN) of an AWS Certificate Manager (ACM) certificate and an AWS Elemental MediaConvert resource.

See also: AWS API Documentation

Request Syntax

response = client.disassociate_certificate(
    Arn='string'
)
Parameters
Arn (string) -- [REQUIRED] The ARN of the ACM certificate that you want to disassociate from your MediaConvert resource.
Return type
dict
Returns
Response Syntax
{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_job(**kwargs)

Retrieve the JSON for a specific completed transcoding job.

See also: AWS API Documentation

Request Syntax

response = client.get_job(
    Id='string'
)
Parameters
Id (string) -- [REQUIRED] the job ID of the job.
Return type
dict
Returns
Response Syntax
{
    'Job': {
        'AccelerationSettings': {
            'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
        },
        'AccelerationStatus': 'NOT_APPLICABLE'|'IN_PROGRESS'|'ACCELERATED'|'NOT_ACCELERATED',
        'Arn': 'string',
        'BillingTagsSource': 'QUEUE'|'PRESET'|'JOB_TEMPLATE'|'JOB',
        'CreatedAt': datetime(2015, 1, 1),
        'CurrentPhase': 'PROBING'|'TRANSCODING'|'UPLOADING',
        'ErrorCode': 123,
        'ErrorMessage': 'string',
        'HopDestinations': [
            {
                'Priority': 123,
                'Queue': 'string',
                'WaitMinutes': 123
            },
        ],
        'Id': 'string',
        'JobPercentComplete': 123,
        'JobTemplate': 'string',
        'Messages': {
            'Info': [
                'string',
            ],
            'Warning': [
                'string',
            ]
        },
        'OutputGroupDetails': [
            {
                'OutputDetails': [
                    {
                        'DurationInMs': 123,
                        'VideoDetails': {
                            'HeightInPx': 123,
                            'WidthInPx': 123
                        }
                    },
                ]
            },
        ],
        'Priority': 123,
        'Queue': 'string',
        'QueueTransitions': [
            {
                'DestinationQueue': 'string',
                'SourceQueue': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ],
        'RetryCount': 123,
        'Role': 'string',
        'Settings': {
            'AdAvailOffset': 123,
            'AvailBlanking': {
                'AvailBlankingImage': 'string'
            },
            'Esam': {
                'ManifestConfirmConditionNotification': {
                    'MccXml': 'string'
                },
                'ResponseSignalPreroll': 123,
                'SignalProcessingNotification': {
                    'SccXml': 'string'
                }
            },
            'Inputs': [
                {
                    'AudioSelectorGroups': {
                        'string': {
                            'AudioSelectorNames': [
                                'string',
                            ]
                        }
                    },
                    'AudioSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                            'ExternalAudioFileInput': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'Offset': 123,
                            'Pids': [
                                123,
                            ],
                            'ProgramSelection': 123,
                            'RemixSettings': {
                                'ChannelMapping': {
                                    'OutputChannels': [
                                        {
                                            'InputChannels': [
                                                123,
                                            ],
                                            'InputChannelsFineTune': [
                                                123.0,
                                            ]
                                        },
                                    ]
                                },
                                'ChannelsIn': 123,
                                'ChannelsOut': 123
                            },
                            'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                            'Tracks': [
                                123,
                            ]
                        }
                    },
                    'CaptionSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'SourceSettings': {
                                'AncillarySourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'SourceAncillaryChannelNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'DvbSubSourceSettings': {
                                    'Pid': 123
                                },
                                'EmbeddedSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Source608ChannelNumber': 123,
                                    'Source608TrackNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'FileSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Framerate': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123
                                    },
                                    'SourceFile': 'string',
                                    'TimeDelta': 123
                                },
                                'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                'TeletextSourceSettings': {
                                    'PageNumber': 'string'
                                },
                                'TrackSourceSettings': {
                                    'TrackNumber': 123
                                }
                            }
                        }
                    },
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DeblockFilter': 'ENABLED'|'DISABLED',
                    'DecryptionSettings': {
                        'DecryptionMode': 'AES_CTR'|'AES_CBC'|'AES_GCM',
                        'EncryptedDecryptionKey': 'string',
                        'InitializationVector': 'string',
                        'KmsKeyRegion': 'string'
                    },
                    'DenoiseFilter': 'ENABLED'|'DISABLED',
                    'FileInput': 'string',
                    'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                    'FilterStrength': 123,
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'InputClippings': [
                        {
                            'EndTimecode': 'string',
                            'StartTimecode': 'string'
                        },
                    ],
                    'InputScanType': 'AUTO'|'PSF',
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'ProgramNumber': 123,
                    'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                    'SupplementalImps': [
                        'string',
                    ],
                    'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'TimecodeStart': 'string',
                    'VideoSelector': {
                        'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                        'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                        'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Pid': 123,
                        'ProgramNumber': 123,
                        'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                    }
                },
            ],
            'MotionImageInserter': {
                'Framerate': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123
                },
                'Input': 'string',
                'InsertionMode': 'MOV'|'PNG',
                'Offset': {
                    'ImageX': 123,
                    'ImageY': 123
                },
                'Playback': 'ONCE'|'REPEAT',
                'StartTime': 'string'
            },
            'NielsenConfiguration': {
                'BreakoutCode': 123,
                'DistributorId': 'string'
            },
            'NielsenNonLinearWatermark': {
                'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                'AdiFilename': 'string',
                'AssetId': 'string',
                'AssetName': 'string',
                'CbetSourceId': 'string',
                'EpisodeId': 'string',
                'MetadataDestination': 'string',
                'SourceId': 123,
                'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                'TicServerUrl': 'string',
                'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
            },
            'OutputGroups': [
                {
                    'AutomatedEncodingSettings': {
                        'AbrSettings': {
                            'MaxAbrBitrate': 123,
                            'MaxRenditions': 123,
                            'MinAbrBitrate': 123
                        }
                    },
                    'CustomName': 'string',
                    'Name': 'string',
                    'OutputGroupSettings': {
                        'CmafGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'BaseUrl': 'string',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'DashSignaledSystemIds': [
                                        'string',
                                    ],
                                    'HlsSignaledSystemIds': [
                                        'string',
                                    ],
                                    'ResourceId': 'string',
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'FragmentLength': 123,
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'WriteDashManifest': 'DISABLED'|'ENABLED',
                            'WriteHlsManifest': 'DISABLED'|'ENABLED',
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'DashIsoGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                            'BaseUrl': 'string',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'FileGroupSettings': {
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            }
                        },
                        'HlsGroupSettings': {
                            'AdMarkers': [
                                'ELEMENTAL'|'ELEMENTAL_SCTE35',
                            ],
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                            'BaseUrl': 'string',
                            'CaptionLanguageMappings': [
                                {
                                    'CaptionChannel': 123,
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinFinalSegmentLength': 123.0,
                            'MinSegmentLength': 123,
                            'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                            'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                            'ProgramDateTimePeriod': 123,
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'SegmentsPerSubdirectory': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                            'TimedMetadataId3Period': 123,
                            'TimestampDeltaMilliseconds': 123
                        },
                        'MsSmoothGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'ManifestEncoding': 'UTF8'|'UTF16'
                        },
                        'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                    },
                    'Outputs': [
                        {
                            'AudioDescriptions': [
                                {
                                    'AudioChannelTaggingSettings': {
                                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                    },
                                    'AudioNormalizationSettings': {
                                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                        'CorrectionGateLevel': 123,
                                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                        'TargetLkfs': 123.0
                                    },
                                    'AudioSourceName': 'string',
                                    'AudioType': 123,
                                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'CodecSettings': {
                                        'AacSettings': {
                                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                            'Bitrate': 123,
                                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                            'RateControlMode': 'CBR'|'VBR',
                                            'RawFormat': 'LATM_LOAS'|'NONE',
                                            'SampleRate': 123,
                                            'Specification': 'MPEG2'|'MPEG4',
                                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                        },
                                        'Ac3Settings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'SampleRate': 123
                                        },
                                        'AiffSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                        'Eac3AtmosSettings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN',
                                            'CodingMode': 'CODING_MODE_9_1_6',
                                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'SampleRate': 123,
                                            'SpeechThreshold': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Eac3Settings': {
                                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                            'DcFilter': 'ENABLED'|'DISABLED',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LfeControl': 'LFE'|'NO_LFE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                            'SampleRate': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Mp2Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Mp3Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'RateControlMode': 'CBR'|'VBR',
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'OpusSettings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'VorbisSettings': {
                                            'Channels': 123,
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'WavSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'Format': 'RIFF'|'RF64',
                                            'SampleRate': 123
                                        }
                                    },
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'RemixSettings': {
                                        'ChannelMapping': {
                                            'OutputChannels': [
                                                {
                                                    'InputChannels': [
                                                        123,
                                                    ],
                                                    'InputChannelsFineTune': [
                                                        123.0,
                                                    ]
                                                },
                                            ]
                                        },
                                        'ChannelsIn': 123,
                                        'ChannelsOut': 123
                                    },
                                    'StreamName': 'string'
                                },
                            ],
                            'CaptionDescriptions': [
                                {
                                    'CaptionSelectorName': 'string',
                                    'CustomLanguageCode': 'string',
                                    'DestinationSettings': {
                                        'BurninDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                        'DvbSubDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'EmbeddedDestinationSettings': {
                                            'Destination608ChannelNumber': 123,
                                            'Destination708ServiceNumber': 123
                                        },
                                        'ImscDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'SccDestinationSettings': {
                                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                        },
                                        'TeletextDestinationSettings': {
                                            'PageNumber': 'string',
                                            'PageTypes': [
                                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                            ]
                                        },
                                        'TtmlDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'WebvttDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        }
                                    },
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'ContainerSettings': {
                                'CmfcSettings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioGroupId': 'string',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                'F4vSettings': {
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                },
                                'M2tsSettings': {
                                    'AudioBufferModel': 'DVB'|'ATSC',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'Bitrate': 123,
                                    'BufferModel': 'MULTIPLEX'|'NONE',
                                    'DvbNitSettings': {
                                        'NetworkId': 123,
                                        'NetworkName': 'string',
                                        'NitInterval': 123
                                    },
                                    'DvbSdtSettings': {
                                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                        'SdtInterval': 123,
                                        'ServiceName': 'string',
                                        'ServiceProviderName': 'string'
                                    },
                                    'DvbSubPids': [
                                        123,
                                    ],
                                    'DvbTdtSettings': {
                                        'TdtInterval': 123
                                    },
                                    'DvbTeletextPid': 123,
                                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                    'FragmentTime': 123.0,
                                    'MaxPcrInterval': 123,
                                    'MinEbpInterval': 123,
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'NullPacketBitrate': 123.0,
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'RateMode': 'VBR'|'CBR',
                                    'Scte35Esam': {
                                        'Scte35EsamPid': 123
                                    },
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                    'SegmentationTime': 123.0,
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'M3u8Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'MovSettings': {
                                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                    'PaddingControl': 'OMNEON'|'NONE',
                                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                },
                                'Mp4Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'CttsVersion': 123,
                                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                    'Mp4MajorBrand': 'string'
                                },
                                'MpdSettings': {
                                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'MxfSettings': {
                                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                                }
                            },
                            'Extension': 'string',
                            'NameModifier': 'string',
                            'OutputSettings': {
                                'HlsSettings': {
                                    'AudioGroupId': 'string',
                                    'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'SegmentModifier': 'string'
                                }
                            },
                            'Preset': 'string',
                            'VideoDescription': {
                                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                'AntiAlias': 'DISABLED'|'ENABLED',
                                'CodecSettings': {
                                    'Av1Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'MaxBitrate': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'QvbrSettings': {
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'QVBR',
                                        'Slices': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'AvcIntraSettings': {
                                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                        'AvcIntraUhdSettings': {
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                        },
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                    'FrameCaptureSettings': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'MaxCaptures': 123,
                                        'Quality': 123
                                    },
                                    'H264Settings': {
                                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'EntropyEncoding': 'CABAC'|'CAVLC',
                                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'RepeatPps': 'DISABLED'|'ENABLED',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'RP2027',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                    },
                                    'H265Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'TemporalIds': 'DISABLED'|'ENABLED',
                                        'Tiles': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                    },
                                    'Mpeg2Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                        'CodecProfile': 'MAIN'|'PROFILE_422',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                        'RateControlMode': 'VBR'|'CBR',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'D_10',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'ProresSettings': {
                                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Vc3Settings': {
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD',
                                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                    },
                                    'Vp8Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    },
                                    'Vp9Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    }
                                },
                                'ColorMetadata': 'IGNORE'|'INSERT',
                                'Crop': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                'FixedAfd': 123,
                                'Height': 123,
                                'Position': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                'Sharpness': 123,
                                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                'VideoPreprocessors': {
                                    'ColorCorrector': {
                                        'Brightness': 123,
                                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                        'Contrast': 123,
                                        'Hdr10Metadata': {
                                            'BluePrimaryX': 123,
                                            'BluePrimaryY': 123,
                                            'GreenPrimaryX': 123,
                                            'GreenPrimaryY': 123,
                                            'MaxContentLightLevel': 123,
                                            'MaxFrameAverageLightLevel': 123,
                                            'MaxLuminance': 123,
                                            'MinLuminance': 123,
                                            'RedPrimaryX': 123,
                                            'RedPrimaryY': 123,
                                            'WhitePointX': 123,
                                            'WhitePointY': 123
                                        },
                                        'Hue': 123,
                                        'Saturation': 123
                                    },
                                    'Deinterlacer': {
                                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                    },
                                    'DolbyVision': {
                                        'L6Metadata': {
                                            'MaxCll': 123,
                                            'MaxFall': 123
                                        },
                                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                        'Profile': 'PROFILE_5'
                                    },
                                    'ImageInserter': {
                                        'InsertableImages': [
                                            {
                                                'Duration': 123,
                                                'FadeIn': 123,
                                                'FadeOut': 123,
                                                'Height': 123,
                                                'ImageInserterInput': 'string',
                                                'ImageX': 123,
                                                'ImageY': 123,
                                                'Layer': 123,
                                                'Opacity': 123,
                                                'StartTime': 'string',
                                                'Width': 123
                                            },
                                        ]
                                    },
                                    'NoiseReducer': {
                                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                        'FilterSettings': {
                                            'Strength': 123
                                        },
                                        'SpatialFilterSettings': {
                                            'PostFilterSharpenStrength': 123,
                                            'Speed': 123,
                                            'Strength': 123
                                        },
                                        'TemporalFilterSettings': {
                                            'AggressiveMode': 123,
                                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                            'Speed': 123,
                                            'Strength': 123
                                        }
                                    },
                                    'PartnerWatermarking': {
                                        'NexguardFileMarkerSettings': {
                                            'License': 'string',
                                            'Payload': 123,
                                            'Preset': 'string',
                                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                        }
                                    },
                                    'TimecodeBurnin': {
                                        'FontSize': 123,
                                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                        'Prefix': 'string'
                                    }
                                },
                                'Width': 123
                            }
                        },
                    ]
                },
            ],
            'TimecodeConfig': {
                'Anchor': 'string',
                'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'Start': 'string',
                'TimestampOffset': 'string'
            },
            'TimedMetadataInsertion': {
                'Id3Insertions': [
                    {
                        'Id3': 'string',
                        'Timecode': 'string'
                    },
                ]
            }
        },
        'SimulateReservedQueue': 'DISABLED'|'ENABLED',
        'Status': 'SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR',
        'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
        'Timing': {
            'FinishTime': datetime(2015, 1, 1),
            'StartTime': datetime(2015, 1, 1),
            'SubmitTime': datetime(2015, 1, 1)
        },
        'UserMetadata': {
            'string': 'string'
        }
    }
}

Response Structure

  • (dict) --
    • Job (dict) -- Each job converts an input file into an output file or files. For more information, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
      • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
        • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
      • AccelerationStatus (string) -- Describes whether the current job is running with accelerated transcoding. For jobs that have Acceleration (AccelerationMode) set to DISABLED, AccelerationStatus is always NOT_APPLICABLE. For jobs that have Acceleration (AccelerationMode) set to ENABLED or PREFERRED, AccelerationStatus is one of the other states. AccelerationStatus is IN_PROGRESS initially, while the service determines whether the input files and job settings are compatible with accelerated transcoding. If they are, AcclerationStatus is ACCELERATED. If your input files and job settings aren't compatible with accelerated transcoding, the service either fails your job or runs it without accelerated transcoding, depending on how you set Acceleration (AccelerationMode). When the service runs your job without accelerated transcoding, AccelerationStatus is NOT_ACCELERATED.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • BillingTagsSource (string) -- The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any billing report that you set up.
      • CreatedAt (datetime) -- The time, in Unix epoch format in seconds, when the job got created.
      • CurrentPhase (string) -- A job's phase can be PROBING, TRANSCODING OR UPLOADING
      • ErrorCode (integer) -- Error code for the job
      • ErrorMessage (string) -- Error message of Job
      • HopDestinations (list) -- Optional list of hop destinations.
        • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
          • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
          • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
          • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
      • Id (string) -- A portion of the job's ARN, unique within your AWS Elemental MediaConvert resources
      • JobPercentComplete (integer) -- An estimate of how far your job has progressed. This estimate is shown as a percentage of the total time from when your job leaves its queue to when your output files appear in your output Amazon S3 bucket. AWS Elemental MediaConvert provides jobPercentComplete in CloudWatch STATUS_UPDATE events and in the response to GetJob and ListJobs requests. The jobPercentComplete estimate is reliable for the following input containers: Quicktime, Transport Stream, MP4, and MXF. For some jobs, the service can't provide information about job progress. In those cases, jobPercentComplete returns a null value.
      • JobTemplate (string) -- The job template that the job is created from, if it is created from a job template.
      • Messages (dict) -- Provides messages from the service about jobs that you have already successfully submitted.
        • Info (list) -- List of messages that are informational only and don't indicate a problem with your job.
          • (string) --
        • Warning (list) -- List of messages that warn about conditions that might cause your job not to run or to fail.
          • (string) --
      • OutputGroupDetails (list) -- List of output group details
        • (dict) -- Contains details about the output groups specified in the job settings.
          • OutputDetails (list) -- Details about the output
            • (dict) -- Details regarding output
              • DurationInMs (integer) -- Duration in milliseconds
              • VideoDetails (dict) -- Contains details about the output's video stream
                • HeightInPx (integer) -- Height in pixels for the output
                • WidthInPx (integer) -- Width in pixels for the output
      • Priority (integer) -- Relative priority on the job.
      • Queue (string) -- When you create a job, you can specify a queue to send it to. If you don't specify, the job will go to the default queue. For more about queues, see the User Guide topic at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
      • QueueTransitions (list) -- The job's queue hopping history.
        • (dict) -- Description of the source and destination queues between which the job has moved, along with the timestamp of the move
          • DestinationQueue (string) -- The queue that the job was on after the transition.
          • SourceQueue (string) -- The queue that the job was on before the transition.
          • Timestamp (datetime) -- The time, in Unix epoch format, that the job moved from the source queue to the destination queue.
      • RetryCount (integer) -- The number of times that the service automatically attempted to process your job after encountering an error.
      • Role (string) -- The IAM role you use for creating this job. For details about permissions, see the User Guide topic at the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/iam-role.html
      • Settings (dict) -- JobSettings contains all the transcode settings for a job.
        • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
        • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
          • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
        • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
          • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
            • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
          • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
          • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
            • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
        • Inputs (list) -- Use Inputs (inputs) to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
          • (dict) -- Use inputs to define the source files used in your transcoding job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/specify-input-settings.html. You can use multiple video inputs to do input stitching. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html
            • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • (string) --
                • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                  • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                    • (string) --
            • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • (string) --
                • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                  • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                  • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                  • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                  • LanguageCode (string) -- Selects a specific language code from within an audio source.
                  • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                  • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                    • (integer) --
                  • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                  • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                    • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                      • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                        • (dict) -- OutputChannel mapping settings.
                          • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                            • (integer) --
                          • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                            • (float) --
                    • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • SelectorType (string) -- Specifies the type of the audio selector.
                  • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                    • (integer) --
            • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • (string) --
                • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                  • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                    • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                      • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                    • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                      • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                        • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                        • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                      • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                      • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                    • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                    • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                      • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                    • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                      • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
            • DecryptionSettings (dict) -- Settings for decrypting any input files that you encrypt before you upload them to Amazon S3. MediaConvert can decrypt files only when you use AWS Key Management Service (KMS) to encrypt the data key that you use to encrypt your content.
              • DecryptionMode (string) -- Specify the encryption mode that you used to encrypt your input files.
              • EncryptedDecryptionKey (string) -- Warning! Don't provide your encryption key in plaintext. Your job settings could be intercepted, making your encrypted content vulnerable. Specify the encrypted version of the data key that you used to encrypt your content. The data key must be encrypted by AWS Key Management Service (KMS). The key can be 128, 192, or 256 bits.
              • InitializationVector (string) -- Specify the initialization vector that you used when you encrypted your content before uploading it to Amazon S3. You can use a 16-byte initialization vector with any encryption mode. Or, you can use a 12-byte initialization vector with GCM or CTR. MediaConvert accepts only initialization vectors that are base64-encoded.
              • KmsKeyRegion (string) -- Specify the AWS Region for AWS Key Management Service (KMS) that you used to encrypt your data key, if that Region is different from the one you are using for AWS Elemental MediaConvert.
            • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
            • FileInput (string) -- Specify the source file for your transcoding job. You can use multiple inputs in a single job. The service concatenates these inputs, in the order that you specify them in the job, to create the outputs. If your input format is IMF, specify your input by providing the path to your CPL. For example, "s3://bucket/vf/cpl.xml". If the CPL is in an incomplete IMP, make sure to use Supplemental IMPs (SupplementalImps) to specify any supplemental IMPs that contain assets referenced by the CPL.
            • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
            • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
            • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
              • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
            • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
            • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
            • SupplementalImps (list) -- Provide a list of any necessary supplemental IMPs. You need supplemental IMPs if the CPL that you're using for your input is in an incomplete IMP. Specify either the supplemental IMP directories with a trailing slash or the ASSETMAP.xml files. For example ["s3://bucket/ov/", "s3://bucket/vf2/ASSETMAP.xml"]. You don't need to specify the IMP that contains your input CPL, because the service automatically detects it.
              • (string) --
            • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
              • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
              • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
              • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
              • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
              • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
              • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
        • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
          • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
            • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
            • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
          • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
          • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
          • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
            • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
            • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
          • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
          • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
        • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
          • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
          • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
        • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
          • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
          • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
          • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
          • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
          • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
          • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
          • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
          • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
          • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
          • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
          • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
        • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
          • (dict) -- Group of outputs
            • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
              • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
            • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
            • Name (string) -- Name of the output group
            • OutputGroupSettings (dict) -- Output Group settings, including type
              • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                  • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                  • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                  • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
              • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
              • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
              • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                  • (string) --
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                  • (dict) -- Caption Language Mapping
                    • CaptionChannel (integer) -- Caption channel.
                    • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                    • LanguageDescription (string) -- Caption language description.
                • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                  • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                  • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
              • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
              • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
            • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
              • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                  • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                    • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                      • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                    • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                      • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                      • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                      • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                      • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                      • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                      • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                    • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                    • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                    • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                    • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                      • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                        • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                        • CodecProfile (string) -- AAC Profile.
                        • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                        • RateControlMode (string) -- Rate Control Mode.
                        • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                        • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                        • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                        • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                      • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                      • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                      • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                        • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                        • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                        • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                        • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                      • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                        • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                        • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                        • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                        • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                        • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                      • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                        • SampleRate (integer) -- Sample rate in hz.
                        • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                      • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                        • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                      • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                        • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                        • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                        • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                      • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                        • SampleRate (integer) -- Sample rate in Hz.
                    • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                    • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                    • RemixSettings (dict) -- Advanced audio remixing settings.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                  • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                    • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                    • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                      • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                      • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                        • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                      • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                        • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                      • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                        • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                      • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                        • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                        • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                          • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                      • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                        • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                      • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                        • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                    • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                    • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • ContainerSettings (dict) -- Container specific settings.
                  • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                    • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                    • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                  • F4vSettings (dict) -- Settings for F4v container
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                  • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                    • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                      • (integer) --
                    • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                    • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                    • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                      • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                      • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                      • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                    • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                      • (integer) --
                    • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                    • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                    • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                    • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                    • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                    • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                    • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                    • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                    • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                    • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                    • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                    • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                    • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                    • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                    • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                    • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                    • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                  • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                      • (integer) --
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                    • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                    • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                    • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                    • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                    • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                    • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                    • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                    • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                  • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                    • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                    • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                    • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                  • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                    • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                  • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                    • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • MxfSettings (dict) -- These settings relate to your MXF output container.
                    • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                    • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                • OutputSettings (dict) -- Specific settings for this type of output.
                  • HlsSettings (dict) -- Settings for HLS output groups
                    • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                    • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                    • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                    • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                  • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                  • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                  • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                    • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                      • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                    • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                      • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                      • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                    • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                      • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                      • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                      • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                      • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                    • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                      • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                      • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                      • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                      • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                    • H265Settings (dict) -- Settings for H265 codec
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- H.265 Level.
                      • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                      • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                    • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                      • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                    • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                      • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                    • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                  • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                  • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                  • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                  • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                  • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                  • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                  • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                  • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                  • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                    • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                      • Brightness (integer) -- Brightness level.
                      • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                      • Contrast (integer) -- Contrast level.
                      • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                        • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                        • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                        • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                      • Hue (integer) -- Hue in degrees.
                      • Saturation (integer) -- Saturation level.
                    • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                      • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                      • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                      • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                    • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                      • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                        • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                        • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                      • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                      • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                    • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                        • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                          • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                          • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                          • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                          • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                          • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                          • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                          • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                          • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                          • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                          • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                          • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                    • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                      • FilterSettings (dict) -- Settings for a noise reducer filter
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                        • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                        • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                        • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                        • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                        • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                        • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                    • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                      • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                        • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                        • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                    • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                      • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                      • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                      • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                  • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
          • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
          • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
          • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
          • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
        • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
          • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
            • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
              • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
              • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
      • SimulateReservedQueue (string) -- Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need. When this is enabled, MediaConvert runs your job from an on-demand queue with similar performance to what you will see with one RTS in a reserved queue. This setting is disabled by default.
      • Status (string) -- A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
      • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
      • Timing (dict) -- Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
        • FinishTime (datetime) -- The time, in Unix epoch format, that the transcoding job finished
        • StartTime (datetime) -- The time, in Unix epoch format, that transcoding for the job began.
        • SubmitTime (datetime) -- The time, in Unix epoch format, that you submitted the job.
      • UserMetadata (dict) -- User-defined metadata that you want to associate with an MediaConvert job. You specify metadata in key/value pairs.
        • (string) --
          • (string) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
get_job_template(**kwargs)

Retrieve the JSON for a specific job template.

See also: AWS API Documentation

Request Syntax

response = client.get_job_template(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the job template.
Return type
dict
Returns
Response Syntax
{
    'JobTemplate': {
        'AccelerationSettings': {
            'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
        },
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'HopDestinations': [
            {
                'Priority': 123,
                'Queue': 'string',
                'WaitMinutes': 123
            },
        ],
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Priority': 123,
        'Queue': 'string',
        'Settings': {
            'AdAvailOffset': 123,
            'AvailBlanking': {
                'AvailBlankingImage': 'string'
            },
            'Esam': {
                'ManifestConfirmConditionNotification': {
                    'MccXml': 'string'
                },
                'ResponseSignalPreroll': 123,
                'SignalProcessingNotification': {
                    'SccXml': 'string'
                }
            },
            'Inputs': [
                {
                    'AudioSelectorGroups': {
                        'string': {
                            'AudioSelectorNames': [
                                'string',
                            ]
                        }
                    },
                    'AudioSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                            'ExternalAudioFileInput': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'Offset': 123,
                            'Pids': [
                                123,
                            ],
                            'ProgramSelection': 123,
                            'RemixSettings': {
                                'ChannelMapping': {
                                    'OutputChannels': [
                                        {
                                            'InputChannels': [
                                                123,
                                            ],
                                            'InputChannelsFineTune': [
                                                123.0,
                                            ]
                                        },
                                    ]
                                },
                                'ChannelsIn': 123,
                                'ChannelsOut': 123
                            },
                            'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                            'Tracks': [
                                123,
                            ]
                        }
                    },
                    'CaptionSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'SourceSettings': {
                                'AncillarySourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'SourceAncillaryChannelNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'DvbSubSourceSettings': {
                                    'Pid': 123
                                },
                                'EmbeddedSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Source608ChannelNumber': 123,
                                    'Source608TrackNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'FileSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Framerate': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123
                                    },
                                    'SourceFile': 'string',
                                    'TimeDelta': 123
                                },
                                'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                'TeletextSourceSettings': {
                                    'PageNumber': 'string'
                                },
                                'TrackSourceSettings': {
                                    'TrackNumber': 123
                                }
                            }
                        }
                    },
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DeblockFilter': 'ENABLED'|'DISABLED',
                    'DenoiseFilter': 'ENABLED'|'DISABLED',
                    'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                    'FilterStrength': 123,
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'InputClippings': [
                        {
                            'EndTimecode': 'string',
                            'StartTimecode': 'string'
                        },
                    ],
                    'InputScanType': 'AUTO'|'PSF',
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'ProgramNumber': 123,
                    'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                    'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'TimecodeStart': 'string',
                    'VideoSelector': {
                        'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                        'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                        'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Pid': 123,
                        'ProgramNumber': 123,
                        'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                    }
                },
            ],
            'MotionImageInserter': {
                'Framerate': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123
                },
                'Input': 'string',
                'InsertionMode': 'MOV'|'PNG',
                'Offset': {
                    'ImageX': 123,
                    'ImageY': 123
                },
                'Playback': 'ONCE'|'REPEAT',
                'StartTime': 'string'
            },
            'NielsenConfiguration': {
                'BreakoutCode': 123,
                'DistributorId': 'string'
            },
            'NielsenNonLinearWatermark': {
                'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                'AdiFilename': 'string',
                'AssetId': 'string',
                'AssetName': 'string',
                'CbetSourceId': 'string',
                'EpisodeId': 'string',
                'MetadataDestination': 'string',
                'SourceId': 123,
                'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                'TicServerUrl': 'string',
                'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
            },
            'OutputGroups': [
                {
                    'AutomatedEncodingSettings': {
                        'AbrSettings': {
                            'MaxAbrBitrate': 123,
                            'MaxRenditions': 123,
                            'MinAbrBitrate': 123
                        }
                    },
                    'CustomName': 'string',
                    'Name': 'string',
                    'OutputGroupSettings': {
                        'CmafGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'BaseUrl': 'string',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'DashSignaledSystemIds': [
                                        'string',
                                    ],
                                    'HlsSignaledSystemIds': [
                                        'string',
                                    ],
                                    'ResourceId': 'string',
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'FragmentLength': 123,
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'WriteDashManifest': 'DISABLED'|'ENABLED',
                            'WriteHlsManifest': 'DISABLED'|'ENABLED',
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'DashIsoGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                            'BaseUrl': 'string',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'FileGroupSettings': {
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            }
                        },
                        'HlsGroupSettings': {
                            'AdMarkers': [
                                'ELEMENTAL'|'ELEMENTAL_SCTE35',
                            ],
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                            'BaseUrl': 'string',
                            'CaptionLanguageMappings': [
                                {
                                    'CaptionChannel': 123,
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinFinalSegmentLength': 123.0,
                            'MinSegmentLength': 123,
                            'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                            'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                            'ProgramDateTimePeriod': 123,
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'SegmentsPerSubdirectory': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                            'TimedMetadataId3Period': 123,
                            'TimestampDeltaMilliseconds': 123
                        },
                        'MsSmoothGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'ManifestEncoding': 'UTF8'|'UTF16'
                        },
                        'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                    },
                    'Outputs': [
                        {
                            'AudioDescriptions': [
                                {
                                    'AudioChannelTaggingSettings': {
                                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                    },
                                    'AudioNormalizationSettings': {
                                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                        'CorrectionGateLevel': 123,
                                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                        'TargetLkfs': 123.0
                                    },
                                    'AudioSourceName': 'string',
                                    'AudioType': 123,
                                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'CodecSettings': {
                                        'AacSettings': {
                                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                            'Bitrate': 123,
                                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                            'RateControlMode': 'CBR'|'VBR',
                                            'RawFormat': 'LATM_LOAS'|'NONE',
                                            'SampleRate': 123,
                                            'Specification': 'MPEG2'|'MPEG4',
                                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                        },
                                        'Ac3Settings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'SampleRate': 123
                                        },
                                        'AiffSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                        'Eac3AtmosSettings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN',
                                            'CodingMode': 'CODING_MODE_9_1_6',
                                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'SampleRate': 123,
                                            'SpeechThreshold': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Eac3Settings': {
                                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                            'DcFilter': 'ENABLED'|'DISABLED',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LfeControl': 'LFE'|'NO_LFE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                            'SampleRate': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Mp2Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Mp3Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'RateControlMode': 'CBR'|'VBR',
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'OpusSettings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'VorbisSettings': {
                                            'Channels': 123,
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'WavSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'Format': 'RIFF'|'RF64',
                                            'SampleRate': 123
                                        }
                                    },
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'RemixSettings': {
                                        'ChannelMapping': {
                                            'OutputChannels': [
                                                {
                                                    'InputChannels': [
                                                        123,
                                                    ],
                                                    'InputChannelsFineTune': [
                                                        123.0,
                                                    ]
                                                },
                                            ]
                                        },
                                        'ChannelsIn': 123,
                                        'ChannelsOut': 123
                                    },
                                    'StreamName': 'string'
                                },
                            ],
                            'CaptionDescriptions': [
                                {
                                    'CaptionSelectorName': 'string',
                                    'CustomLanguageCode': 'string',
                                    'DestinationSettings': {
                                        'BurninDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                        'DvbSubDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'EmbeddedDestinationSettings': {
                                            'Destination608ChannelNumber': 123,
                                            'Destination708ServiceNumber': 123
                                        },
                                        'ImscDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'SccDestinationSettings': {
                                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                        },
                                        'TeletextDestinationSettings': {
                                            'PageNumber': 'string',
                                            'PageTypes': [
                                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                            ]
                                        },
                                        'TtmlDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'WebvttDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        }
                                    },
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'ContainerSettings': {
                                'CmfcSettings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioGroupId': 'string',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                'F4vSettings': {
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                },
                                'M2tsSettings': {
                                    'AudioBufferModel': 'DVB'|'ATSC',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'Bitrate': 123,
                                    'BufferModel': 'MULTIPLEX'|'NONE',
                                    'DvbNitSettings': {
                                        'NetworkId': 123,
                                        'NetworkName': 'string',
                                        'NitInterval': 123
                                    },
                                    'DvbSdtSettings': {
                                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                        'SdtInterval': 123,
                                        'ServiceName': 'string',
                                        'ServiceProviderName': 'string'
                                    },
                                    'DvbSubPids': [
                                        123,
                                    ],
                                    'DvbTdtSettings': {
                                        'TdtInterval': 123
                                    },
                                    'DvbTeletextPid': 123,
                                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                    'FragmentTime': 123.0,
                                    'MaxPcrInterval': 123,
                                    'MinEbpInterval': 123,
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'NullPacketBitrate': 123.0,
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'RateMode': 'VBR'|'CBR',
                                    'Scte35Esam': {
                                        'Scte35EsamPid': 123
                                    },
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                    'SegmentationTime': 123.0,
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'M3u8Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'MovSettings': {
                                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                    'PaddingControl': 'OMNEON'|'NONE',
                                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                },
                                'Mp4Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'CttsVersion': 123,
                                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                    'Mp4MajorBrand': 'string'
                                },
                                'MpdSettings': {
                                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'MxfSettings': {
                                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                                }
                            },
                            'Extension': 'string',
                            'NameModifier': 'string',
                            'OutputSettings': {
                                'HlsSettings': {
                                    'AudioGroupId': 'string',
                                    'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'SegmentModifier': 'string'
                                }
                            },
                            'Preset': 'string',
                            'VideoDescription': {
                                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                'AntiAlias': 'DISABLED'|'ENABLED',
                                'CodecSettings': {
                                    'Av1Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'MaxBitrate': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'QvbrSettings': {
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'QVBR',
                                        'Slices': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'AvcIntraSettings': {
                                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                        'AvcIntraUhdSettings': {
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                        },
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                    'FrameCaptureSettings': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'MaxCaptures': 123,
                                        'Quality': 123
                                    },
                                    'H264Settings': {
                                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'EntropyEncoding': 'CABAC'|'CAVLC',
                                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'RepeatPps': 'DISABLED'|'ENABLED',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'RP2027',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                    },
                                    'H265Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'TemporalIds': 'DISABLED'|'ENABLED',
                                        'Tiles': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                    },
                                    'Mpeg2Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                        'CodecProfile': 'MAIN'|'PROFILE_422',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                        'RateControlMode': 'VBR'|'CBR',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'D_10',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'ProresSettings': {
                                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Vc3Settings': {
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD',
                                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                    },
                                    'Vp8Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    },
                                    'Vp9Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    }
                                },
                                'ColorMetadata': 'IGNORE'|'INSERT',
                                'Crop': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                'FixedAfd': 123,
                                'Height': 123,
                                'Position': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                'Sharpness': 123,
                                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                'VideoPreprocessors': {
                                    'ColorCorrector': {
                                        'Brightness': 123,
                                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                        'Contrast': 123,
                                        'Hdr10Metadata': {
                                            'BluePrimaryX': 123,
                                            'BluePrimaryY': 123,
                                            'GreenPrimaryX': 123,
                                            'GreenPrimaryY': 123,
                                            'MaxContentLightLevel': 123,
                                            'MaxFrameAverageLightLevel': 123,
                                            'MaxLuminance': 123,
                                            'MinLuminance': 123,
                                            'RedPrimaryX': 123,
                                            'RedPrimaryY': 123,
                                            'WhitePointX': 123,
                                            'WhitePointY': 123
                                        },
                                        'Hue': 123,
                                        'Saturation': 123
                                    },
                                    'Deinterlacer': {
                                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                    },
                                    'DolbyVision': {
                                        'L6Metadata': {
                                            'MaxCll': 123,
                                            'MaxFall': 123
                                        },
                                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                        'Profile': 'PROFILE_5'
                                    },
                                    'ImageInserter': {
                                        'InsertableImages': [
                                            {
                                                'Duration': 123,
                                                'FadeIn': 123,
                                                'FadeOut': 123,
                                                'Height': 123,
                                                'ImageInserterInput': 'string',
                                                'ImageX': 123,
                                                'ImageY': 123,
                                                'Layer': 123,
                                                'Opacity': 123,
                                                'StartTime': 'string',
                                                'Width': 123
                                            },
                                        ]
                                    },
                                    'NoiseReducer': {
                                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                        'FilterSettings': {
                                            'Strength': 123
                                        },
                                        'SpatialFilterSettings': {
                                            'PostFilterSharpenStrength': 123,
                                            'Speed': 123,
                                            'Strength': 123
                                        },
                                        'TemporalFilterSettings': {
                                            'AggressiveMode': 123,
                                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                            'Speed': 123,
                                            'Strength': 123
                                        }
                                    },
                                    'PartnerWatermarking': {
                                        'NexguardFileMarkerSettings': {
                                            'License': 'string',
                                            'Payload': 123,
                                            'Preset': 'string',
                                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                        }
                                    },
                                    'TimecodeBurnin': {
                                        'FontSize': 123,
                                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                        'Prefix': 'string'
                                    }
                                },
                                'Width': 123
                            }
                        },
                    ]
                },
            ],
            'TimecodeConfig': {
                'Anchor': 'string',
                'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'Start': 'string',
                'TimestampOffset': 'string'
            },
            'TimedMetadataInsertion': {
                'Id3Insertions': [
                    {
                        'Id3': 'string',
                        'Timecode': 'string'
                    },
                ]
            }
        },
        'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • JobTemplate (dict) -- A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
      • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
        • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your job templates.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for Job template creation.
      • Description (string) -- An optional description you create for each job template.
      • HopDestinations (list) -- Optional list of hop destinations.
        • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
          • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
          • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
          • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the Job template was last updated.
      • Name (string) -- A name you create for each job template. Each name must be unique within your account.
      • Priority (integer) -- Relative priority on the job.
      • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
      • Settings (dict) -- JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.
        • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
        • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
          • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
        • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
          • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
            • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
          • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
          • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
            • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
        • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
          • (dict) -- Specified video input in a template.
            • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • (string) --
                • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                  • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                    • (string) --
            • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • (string) --
                • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                  • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                  • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                  • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                  • LanguageCode (string) -- Selects a specific language code from within an audio source.
                  • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                  • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                    • (integer) --
                  • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                  • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                    • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                      • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                        • (dict) -- OutputChannel mapping settings.
                          • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                            • (integer) --
                          • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                            • (float) --
                    • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • SelectorType (string) -- Specifies the type of the audio selector.
                  • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                    • (integer) --
            • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • (string) --
                • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                  • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                    • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                      • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                    • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                      • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                        • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                        • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                      • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                      • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                    • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                    • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                      • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                    • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                      • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
            • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
            • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
            • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
            • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
              • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
            • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
            • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
            • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
              • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
              • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
              • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
              • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
              • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
              • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
        • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
          • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
            • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
            • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
          • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
          • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
          • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
            • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
            • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
          • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
          • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
        • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
          • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
          • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
        • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
          • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
          • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
          • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
          • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
          • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
          • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
          • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
          • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
          • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
          • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
          • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
        • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
          • (dict) -- Group of outputs
            • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
              • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
            • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
            • Name (string) -- Name of the output group
            • OutputGroupSettings (dict) -- Output Group settings, including type
              • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                  • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                  • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                  • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
              • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
              • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
              • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                  • (string) --
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                  • (dict) -- Caption Language Mapping
                    • CaptionChannel (integer) -- Caption channel.
                    • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                    • LanguageDescription (string) -- Caption language description.
                • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                  • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                  • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
              • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
              • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
            • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
              • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                  • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                    • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                      • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                    • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                      • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                      • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                      • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                      • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                      • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                      • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                    • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                    • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                    • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                    • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                      • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                        • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                        • CodecProfile (string) -- AAC Profile.
                        • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                        • RateControlMode (string) -- Rate Control Mode.
                        • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                        • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                        • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                        • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                      • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                      • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                      • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                        • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                        • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                        • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                        • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                      • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                        • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                        • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                        • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                        • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                        • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                      • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                        • SampleRate (integer) -- Sample rate in hz.
                        • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                      • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                        • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                      • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                        • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                        • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                        • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                      • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                        • SampleRate (integer) -- Sample rate in Hz.
                    • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                    • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                    • RemixSettings (dict) -- Advanced audio remixing settings.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                  • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                    • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                    • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                      • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                      • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                        • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                      • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                        • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                      • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                        • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                      • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                        • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                        • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                          • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                      • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                        • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                      • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                        • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                    • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                    • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • ContainerSettings (dict) -- Container specific settings.
                  • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                    • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                    • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                  • F4vSettings (dict) -- Settings for F4v container
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                  • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                    • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                      • (integer) --
                    • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                    • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                    • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                      • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                      • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                      • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                    • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                      • (integer) --
                    • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                    • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                    • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                    • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                    • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                    • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                    • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                    • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                    • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                    • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                    • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                    • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                    • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                    • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                    • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                    • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                    • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                  • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                      • (integer) --
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                    • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                    • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                    • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                    • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                    • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                    • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                    • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                    • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                  • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                    • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                    • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                    • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                  • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                    • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                  • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                    • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • MxfSettings (dict) -- These settings relate to your MXF output container.
                    • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                    • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                • OutputSettings (dict) -- Specific settings for this type of output.
                  • HlsSettings (dict) -- Settings for HLS output groups
                    • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                    • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                    • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                    • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                  • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                  • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                  • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                    • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                      • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                    • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                      • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                      • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                    • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                      • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                      • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                      • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                      • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                    • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                      • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                      • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                      • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                      • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                    • H265Settings (dict) -- Settings for H265 codec
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- H.265 Level.
                      • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                      • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                    • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                      • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                    • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                      • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                    • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                  • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                  • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                  • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                  • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                  • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                  • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                  • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                  • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                  • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                    • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                      • Brightness (integer) -- Brightness level.
                      • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                      • Contrast (integer) -- Contrast level.
                      • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                        • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                        • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                        • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                      • Hue (integer) -- Hue in degrees.
                      • Saturation (integer) -- Saturation level.
                    • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                      • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                      • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                      • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                    • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                      • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                        • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                        • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                      • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                      • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                    • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                        • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                          • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                          • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                          • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                          • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                          • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                          • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                          • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                          • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                          • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                          • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                          • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                    • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                      • FilterSettings (dict) -- Settings for a noise reducer filter
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                        • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                        • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                        • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                        • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                        • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                        • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                    • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                      • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                        • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                        • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                    • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                      • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                      • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                      • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                  • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
          • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
          • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
          • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
          • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
        • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
          • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
            • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
              • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
              • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
      • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
      • Type (string) -- A job template can be of two types: system or custom. System or built-in job templates can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_preset(**kwargs)

Retrieve the JSON for a specific preset.

See also: AWS API Documentation

Request Syntax

response = client.get_preset(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the preset.
Return type
dict
Returns
Response Syntax
{
    'Preset': {
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Settings': {
            'AudioDescriptions': [
                {
                    'AudioChannelTaggingSettings': {
                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                    },
                    'AudioNormalizationSettings': {
                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                        'CorrectionGateLevel': 123,
                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                        'TargetLkfs': 123.0
                    },
                    'AudioSourceName': 'string',
                    'AudioType': 123,
                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'CodecSettings': {
                        'AacSettings': {
                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                            'Bitrate': 123,
                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                            'RateControlMode': 'CBR'|'VBR',
                            'RawFormat': 'LATM_LOAS'|'NONE',
                            'SampleRate': 123,
                            'Specification': 'MPEG2'|'MPEG4',
                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                        },
                        'Ac3Settings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'SampleRate': 123
                        },
                        'AiffSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                        'Eac3AtmosSettings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN',
                            'CodingMode': 'CODING_MODE_9_1_6',
                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                            'SampleRate': 123,
                            'SpeechThreshold': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Eac3Settings': {
                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                            'DcFilter': 'ENABLED'|'DISABLED',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LfeControl': 'LFE'|'NO_LFE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                            'SampleRate': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Mp2Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Mp3Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'RateControlMode': 'CBR'|'VBR',
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'OpusSettings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'VorbisSettings': {
                            'Channels': 123,
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'WavSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'Format': 'RIFF'|'RF64',
                            'SampleRate': 123
                        }
                    },
                    'CustomLanguageCode': 'string',
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'RemixSettings': {
                        'ChannelMapping': {
                            'OutputChannels': [
                                {
                                    'InputChannels': [
                                        123,
                                    ],
                                    'InputChannelsFineTune': [
                                        123.0,
                                    ]
                                },
                            ]
                        },
                        'ChannelsIn': 123,
                        'ChannelsOut': 123
                    },
                    'StreamName': 'string'
                },
            ],
            'CaptionDescriptions': [
                {
                    'CustomLanguageCode': 'string',
                    'DestinationSettings': {
                        'BurninDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                        'DvbSubDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'EmbeddedDestinationSettings': {
                            'Destination608ChannelNumber': 123,
                            'Destination708ServiceNumber': 123
                        },
                        'ImscDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'SccDestinationSettings': {
                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                        },
                        'TeletextDestinationSettings': {
                            'PageNumber': 'string',
                            'PageTypes': [
                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                            ]
                        },
                        'TtmlDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'WebvttDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        }
                    },
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageDescription': 'string'
                },
            ],
            'ContainerSettings': {
                'CmfcSettings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioGroupId': 'string',
                    'AudioRenditionSets': 'string',
                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                'F4vSettings': {
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                },
                'M2tsSettings': {
                    'AudioBufferModel': 'DVB'|'ATSC',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'Bitrate': 123,
                    'BufferModel': 'MULTIPLEX'|'NONE',
                    'DvbNitSettings': {
                        'NetworkId': 123,
                        'NetworkName': 'string',
                        'NitInterval': 123
                    },
                    'DvbSdtSettings': {
                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                        'SdtInterval': 123,
                        'ServiceName': 'string',
                        'ServiceProviderName': 'string'
                    },
                    'DvbSubPids': [
                        123,
                    ],
                    'DvbTdtSettings': {
                        'TdtInterval': 123
                    },
                    'DvbTeletextPid': 123,
                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                    'FragmentTime': 123.0,
                    'MaxPcrInterval': 123,
                    'MinEbpInterval': 123,
                    'NielsenId3': 'INSERT'|'NONE',
                    'NullPacketBitrate': 123.0,
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'RateMode': 'VBR'|'CBR',
                    'Scte35Esam': {
                        'Scte35EsamPid': 123
                    },
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                    'SegmentationTime': 123.0,
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'M3u8Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'NielsenId3': 'INSERT'|'NONE',
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'MovSettings': {
                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                    'PaddingControl': 'OMNEON'|'NONE',
                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                },
                'Mp4Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'CttsVersion': 123,
                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                    'Mp4MajorBrand': 'string'
                },
                'MpdSettings': {
                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'MxfSettings': {
                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                }
            },
            'VideoDescription': {
                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                'AntiAlias': 'DISABLED'|'ENABLED',
                'CodecSettings': {
                    'Av1Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'MaxBitrate': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'QvbrSettings': {
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'QVBR',
                        'Slices': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'AvcIntraSettings': {
                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                        'AvcIntraUhdSettings': {
                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                        },
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                    'FrameCaptureSettings': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'MaxCaptures': 123,
                        'Quality': 123
                    },
                    'H264Settings': {
                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'EntropyEncoding': 'CABAC'|'CAVLC',
                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'RepeatPps': 'DISABLED'|'ENABLED',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'RP2027',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                    },
                    'H265Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'TemporalIds': 'DISABLED'|'ENABLED',
                        'Tiles': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                    },
                    'Mpeg2Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                        'CodecProfile': 'MAIN'|'PROFILE_422',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                        'RateControlMode': 'VBR'|'CBR',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'D_10',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'ProresSettings': {
                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Vc3Settings': {
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD',
                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                    },
                    'Vp8Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    },
                    'Vp9Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    }
                },
                'ColorMetadata': 'IGNORE'|'INSERT',
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                'FixedAfd': 123,
                'Height': 123,
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                'Sharpness': 123,
                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                'VideoPreprocessors': {
                    'ColorCorrector': {
                        'Brightness': 123,
                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                        'Contrast': 123,
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Hue': 123,
                        'Saturation': 123
                    },
                    'Deinterlacer': {
                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                    },
                    'DolbyVision': {
                        'L6Metadata': {
                            'MaxCll': 123,
                            'MaxFall': 123
                        },
                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                        'Profile': 'PROFILE_5'
                    },
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'NoiseReducer': {
                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                        'FilterSettings': {
                            'Strength': 123
                        },
                        'SpatialFilterSettings': {
                            'PostFilterSharpenStrength': 123,
                            'Speed': 123,
                            'Strength': 123
                        },
                        'TemporalFilterSettings': {
                            'AggressiveMode': 123,
                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                            'Speed': 123,
                            'Strength': 123
                        }
                    },
                    'PartnerWatermarking': {
                        'NexguardFileMarkerSettings': {
                            'License': 'string',
                            'Payload': 123,
                            'Preset': 'string',
                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                        }
                    },
                    'TimecodeBurnin': {
                        'FontSize': 123,
                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                        'Prefix': 'string'
                    }
                },
                'Width': 123
            }
        },
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Preset (dict) -- A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your presets.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for preset creation.
      • Description (string) -- An optional description you create for each preset.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the preset was last updated.
      • Name (string) -- A name you create for each preset. Each name must be unique within your account.
      • Settings (dict) -- Settings for preset
        • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
          • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
            • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
              • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
            • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
              • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
              • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
              • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
              • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
              • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
              • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
            • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
            • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
            • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
            • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
              • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                • CodecProfile (string) -- AAC Profile.
                • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                • RateControlMode (string) -- Rate Control Mode.
                • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
              • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
              • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • SampleRate (integer) -- Sample rate in hz.
              • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
              • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
              • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
              • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Sample rate in hz.
              • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                • SampleRate (integer) -- Sample rate in hz.
                • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
              • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
              • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
              • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                • SampleRate (integer) -- Sample rate in Hz.
            • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
            • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
            • RemixSettings (dict) -- Advanced audio remixing settings.
              • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                  • (dict) -- OutputChannel mapping settings.
                    • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                      • (integer) --
                    • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                      • (float) --
              • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
            • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
          • (dict) -- Caption Description for preset
            • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
              • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
              • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
              • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
              • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
              • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                  • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
              • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
              • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
            • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
            • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • ContainerSettings (dict) -- Container specific settings.
          • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
            • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
            • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
            • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
            • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
          • F4vSettings (dict) -- Settings for F4v container
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
          • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
            • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
              • (integer) --
            • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
            • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
            • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
              • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
              • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
              • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
              • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
            • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
              • (integer) --
            • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
            • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
            • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
            • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
            • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
            • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
            • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
            • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
            • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
            • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
            • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
            • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
            • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
            • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
            • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
            • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
            • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
          • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
              • (integer) --
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
            • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
            • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
            • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
            • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
            • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
            • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
            • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
            • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
          • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
            • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
            • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
            • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
          • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
            • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
            • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
          • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
            • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • MxfSettings (dict) -- These settings relate to your MXF output container.
            • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
            • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
        • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
          • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
          • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
          • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
            • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
              • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
            • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
              • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
              • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
            • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
              • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
              • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
              • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
              • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
            • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
              • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
              • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
              • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
              • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
            • H265Settings (dict) -- Settings for H265 codec
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- H.265 Level.
              • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
              • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
              • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
              • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
            • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
              • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
            • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
              • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
            • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
            • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
          • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
          • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
          • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
          • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
          • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
          • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
          • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
          • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
          • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
            • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
              • Brightness (integer) -- Brightness level.
              • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
              • Contrast (integer) -- Contrast level.
              • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Hue (integer) -- Hue in degrees.
              • Saturation (integer) -- Saturation level.
            • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
              • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
              • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
              • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
            • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
              • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
              • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
              • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
            • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
              • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
              • FilterSettings (dict) -- Settings for a noise reducer filter
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
            • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
              • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
            • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
              • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
              • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
              • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
          • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
      • Type (string) -- A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
get_queue(**kwargs)

Retrieve the JSON for a specific queue.

See also: AWS API Documentation

Request Syntax

response = client.get_queue(
    Name='string'
)
Parameters
Name (string) -- [REQUIRED] The name of the queue that you want information about.
Return type
dict
Returns
Response Syntax
{
    'Queue': {
        'Arn': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'PricingPlan': 'ON_DEMAND'|'RESERVED',
        'ProgressingJobsCount': 123,
        'ReservationPlan': {
            'Commitment': 'ONE_YEAR',
            'ExpiresAt': datetime(2015, 1, 1),
            'PurchasedAt': datetime(2015, 1, 1),
            'RenewalType': 'AUTO_RENEW'|'EXPIRE',
            'ReservedSlots': 123,
            'Status': 'ACTIVE'|'EXPIRED'
        },
        'Status': 'ACTIVE'|'PAUSED',
        'SubmittedJobsCount': 123,
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Queue (dict) -- You can use queues to manage the resources that are available to your AWS account for running multiple transcoding jobs at the same time. If you don't specify a queue, the service sends all jobs through the default queue. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for when you created the queue.
      • Description (string) -- An optional description that you create for each queue.
      • LastUpdated (datetime) -- The timestamp in epoch seconds for when you most recently updated the queue.
      • Name (string) -- A name that you create for each queue. Each name must be unique within your account.
      • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment.
      • ProgressingJobsCount (integer) -- The estimated number of jobs with a PROGRESSING status.
      • ReservationPlan (dict) -- Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.
        • Commitment (string) -- The length of the term of your reserved queue pricing plan commitment.
        • ExpiresAt (datetime) -- The timestamp in epoch seconds for when the current pricing plan term for this reserved queue expires.
        • PurchasedAt (datetime) -- The timestamp in epoch seconds for when you set up the current pricing plan for this reserved queue.
        • RenewalType (string) -- Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term.
        • ReservedSlots (integer) -- Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. When you increase this number, you extend your existing commitment with a new 12-month commitment for a larger number of RTS. The new commitment begins when you purchase the additional capacity. You can't decrease the number of RTS in your reserved queue.
        • Status (string) -- Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
      • Status (string) -- Queues can be ACTIVE or PAUSED. If you pause a queue, the service won't begin processing jobs in that queue. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
      • SubmittedJobsCount (integer) -- The estimated number of jobs with a SUBMITTED status.
      • Type (string) -- Specifies whether this on-demand queue is system or custom. System queues are built in. You can't modify or delete system queues. You can create and modify custom queues.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_job_templates(**kwargs)

Retrieve a JSON array of up to twenty of your job templates. This will return the templates themselves, not just a list of them. To retrieve the next twenty templates, use the nextToken string returned with the array

See also: AWS API Documentation

Request Syntax

response = client.list_job_templates(
    Category='string',
    ListBy='NAME'|'CREATION_DATE'|'SYSTEM',
    MaxResults=123,
    NextToken='string',
    Order='ASCENDING'|'DESCENDING'
)
Parameters
  • Category (string) -- Optionally, specify a job template category to limit responses to only job templates from that category.
  • ListBy (string) -- Optional. When you request a list of job templates, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.
  • MaxResults (integer) -- Optional. Number of job templates, up to twenty, that will be returned at one time.
  • NextToken (string) -- Use this string, provided with the response to a previous request, to request the next batch of job templates.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
Return type

dict

Returns

Response Syntax

{
    'JobTemplates': [
        {
            'AccelerationSettings': {
                'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
            },
            'Arn': 'string',
            'Category': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'HopDestinations': [
                {
                    'Priority': 123,
                    'Queue': 'string',
                    'WaitMinutes': 123
                },
            ],
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'Priority': 123,
            'Queue': 'string',
            'Settings': {
                'AdAvailOffset': 123,
                'AvailBlanking': {
                    'AvailBlankingImage': 'string'
                },
                'Esam': {
                    'ManifestConfirmConditionNotification': {
                        'MccXml': 'string'
                    },
                    'ResponseSignalPreroll': 123,
                    'SignalProcessingNotification': {
                        'SccXml': 'string'
                    }
                },
                'Inputs': [
                    {
                        'AudioSelectorGroups': {
                            'string': {
                                'AudioSelectorNames': [
                                    'string',
                                ]
                            }
                        },
                        'AudioSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                                'ExternalAudioFileInput': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'Offset': 123,
                                'Pids': [
                                    123,
                                ],
                                'ProgramSelection': 123,
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                                'Tracks': [
                                    123,
                                ]
                            }
                        },
                        'CaptionSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'SourceSettings': {
                                    'AncillarySourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'SourceAncillaryChannelNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'DvbSubSourceSettings': {
                                        'Pid': 123
                                    },
                                    'EmbeddedSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Source608ChannelNumber': 123,
                                        'Source608TrackNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'FileSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Framerate': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123
                                        },
                                        'SourceFile': 'string',
                                        'TimeDelta': 123
                                    },
                                    'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                    'TeletextSourceSettings': {
                                        'PageNumber': 'string'
                                    },
                                    'TrackSourceSettings': {
                                        'TrackNumber': 123
                                    }
                                }
                            }
                        },
                        'Crop': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'DeblockFilter': 'ENABLED'|'DISABLED',
                        'DenoiseFilter': 'ENABLED'|'DISABLED',
                        'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                        'FilterStrength': 123,
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'InputClippings': [
                            {
                                'EndTimecode': 'string',
                                'StartTimecode': 'string'
                            },
                        ],
                        'InputScanType': 'AUTO'|'PSF',
                        'Position': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'ProgramNumber': 123,
                        'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                        'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                        'TimecodeStart': 'string',
                        'VideoSelector': {
                            'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                            'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                            'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Pid': 123,
                            'ProgramNumber': 123,
                            'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                        }
                    },
                ],
                'MotionImageInserter': {
                    'Framerate': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123
                    },
                    'Input': 'string',
                    'InsertionMode': 'MOV'|'PNG',
                    'Offset': {
                        'ImageX': 123,
                        'ImageY': 123
                    },
                    'Playback': 'ONCE'|'REPEAT',
                    'StartTime': 'string'
                },
                'NielsenConfiguration': {
                    'BreakoutCode': 123,
                    'DistributorId': 'string'
                },
                'NielsenNonLinearWatermark': {
                    'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                    'AdiFilename': 'string',
                    'AssetId': 'string',
                    'AssetName': 'string',
                    'CbetSourceId': 'string',
                    'EpisodeId': 'string',
                    'MetadataDestination': 'string',
                    'SourceId': 123,
                    'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                    'TicServerUrl': 'string',
                    'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
                },
                'OutputGroups': [
                    {
                        'AutomatedEncodingSettings': {
                            'AbrSettings': {
                                'MaxAbrBitrate': 123,
                                'MaxRenditions': 123,
                                'MinAbrBitrate': 123
                            }
                        },
                        'CustomName': 'string',
                        'Name': 'string',
                        'OutputGroupSettings': {
                            'CmafGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'BaseUrl': 'string',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'DashSignaledSystemIds': [
                                            'string',
                                        ],
                                        'HlsSignaledSystemIds': [
                                            'string',
                                        ],
                                        'ResourceId': 'string',
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'FragmentLength': 123,
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'WriteDashManifest': 'DISABLED'|'ENABLED',
                                'WriteHlsManifest': 'DISABLED'|'ENABLED',
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'DashIsoGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                                'BaseUrl': 'string',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'FileGroupSettings': {
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                }
                            },
                            'HlsGroupSettings': {
                                'AdMarkers': [
                                    'ELEMENTAL'|'ELEMENTAL_SCTE35',
                                ],
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                                'BaseUrl': 'string',
                                'CaptionLanguageMappings': [
                                    {
                                        'CaptionChannel': 123,
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinFinalSegmentLength': 123.0,
                                'MinSegmentLength': 123,
                                'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                                'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                                'ProgramDateTimePeriod': 123,
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'SegmentsPerSubdirectory': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                                'TimedMetadataId3Period': 123,
                                'TimestampDeltaMilliseconds': 123
                            },
                            'MsSmoothGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'ManifestEncoding': 'UTF8'|'UTF16'
                            },
                            'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                        },
                        'Outputs': [
                            {
                                'AudioDescriptions': [
                                    {
                                        'AudioChannelTaggingSettings': {
                                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                        },
                                        'AudioNormalizationSettings': {
                                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                            'CorrectionGateLevel': 123,
                                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                            'TargetLkfs': 123.0
                                        },
                                        'AudioSourceName': 'string',
                                        'AudioType': 123,
                                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'CodecSettings': {
                                            'AacSettings': {
                                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                                'Bitrate': 123,
                                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                                'RateControlMode': 'CBR'|'VBR',
                                                'RawFormat': 'LATM_LOAS'|'NONE',
                                                'SampleRate': 123,
                                                'Specification': 'MPEG2'|'MPEG4',
                                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                            },
                                            'Ac3Settings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'SampleRate': 123
                                            },
                                            'AiffSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                            'Eac3AtmosSettings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN',
                                                'CodingMode': 'CODING_MODE_9_1_6',
                                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                                'SampleRate': 123,
                                                'SpeechThreshold': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Eac3Settings': {
                                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                                'DcFilter': 'ENABLED'|'DISABLED',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LfeControl': 'LFE'|'NO_LFE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                                'SampleRate': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Mp2Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Mp3Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'RateControlMode': 'CBR'|'VBR',
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'OpusSettings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'VorbisSettings': {
                                                'Channels': 123,
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'WavSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'Format': 'RIFF'|'RF64',
                                                'SampleRate': 123
                                            }
                                        },
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'RemixSettings': {
                                            'ChannelMapping': {
                                                'OutputChannels': [
                                                    {
                                                        'InputChannels': [
                                                            123,
                                                        ],
                                                        'InputChannelsFineTune': [
                                                            123.0,
                                                        ]
                                                    },
                                                ]
                                            },
                                            'ChannelsIn': 123,
                                            'ChannelsOut': 123
                                        },
                                        'StreamName': 'string'
                                    },
                                ],
                                'CaptionDescriptions': [
                                    {
                                        'CaptionSelectorName': 'string',
                                        'CustomLanguageCode': 'string',
                                        'DestinationSettings': {
                                            'BurninDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                            'DvbSubDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'EmbeddedDestinationSettings': {
                                                'Destination608ChannelNumber': 123,
                                                'Destination708ServiceNumber': 123
                                            },
                                            'ImscDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'SccDestinationSettings': {
                                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                            },
                                            'TeletextDestinationSettings': {
                                                'PageNumber': 'string',
                                                'PageTypes': [
                                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                                ]
                                            },
                                            'TtmlDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'WebvttDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            }
                                        },
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'ContainerSettings': {
                                    'CmfcSettings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioGroupId': 'string',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                    'F4vSettings': {
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                    },
                                    'M2tsSettings': {
                                        'AudioBufferModel': 'DVB'|'ATSC',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'Bitrate': 123,
                                        'BufferModel': 'MULTIPLEX'|'NONE',
                                        'DvbNitSettings': {
                                            'NetworkId': 123,
                                            'NetworkName': 'string',
                                            'NitInterval': 123
                                        },
                                        'DvbSdtSettings': {
                                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                            'SdtInterval': 123,
                                            'ServiceName': 'string',
                                            'ServiceProviderName': 'string'
                                        },
                                        'DvbSubPids': [
                                            123,
                                        ],
                                        'DvbTdtSettings': {
                                            'TdtInterval': 123
                                        },
                                        'DvbTeletextPid': 123,
                                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                        'FragmentTime': 123.0,
                                        'MaxPcrInterval': 123,
                                        'MinEbpInterval': 123,
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'NullPacketBitrate': 123.0,
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'RateMode': 'VBR'|'CBR',
                                        'Scte35Esam': {
                                            'Scte35EsamPid': 123
                                        },
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                        'SegmentationTime': 123.0,
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'M3u8Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'MovSettings': {
                                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                        'PaddingControl': 'OMNEON'|'NONE',
                                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                    },
                                    'Mp4Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'CttsVersion': 123,
                                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                        'Mp4MajorBrand': 'string'
                                    },
                                    'MpdSettings': {
                                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'MxfSettings': {
                                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                                    }
                                },
                                'Extension': 'string',
                                'NameModifier': 'string',
                                'OutputSettings': {
                                    'HlsSettings': {
                                        'AudioGroupId': 'string',
                                        'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'SegmentModifier': 'string'
                                    }
                                },
                                'Preset': 'string',
                                'VideoDescription': {
                                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                    'AntiAlias': 'DISABLED'|'ENABLED',
                                    'CodecSettings': {
                                        'Av1Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'MaxBitrate': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'QvbrSettings': {
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'QVBR',
                                            'Slices': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'AvcIntraSettings': {
                                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                            'AvcIntraUhdSettings': {
                                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                            },
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                        'FrameCaptureSettings': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'MaxCaptures': 123,
                                            'Quality': 123
                                        },
                                        'H264Settings': {
                                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'EntropyEncoding': 'CABAC'|'CAVLC',
                                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'RepeatPps': 'DISABLED'|'ENABLED',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'RP2027',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                        },
                                        'H265Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'TemporalIds': 'DISABLED'|'ENABLED',
                                            'Tiles': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                        },
                                        'Mpeg2Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                            'CodecProfile': 'MAIN'|'PROFILE_422',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                            'RateControlMode': 'VBR'|'CBR',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'D_10',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'ProresSettings': {
                                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Vc3Settings': {
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD',
                                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                        },
                                        'Vp8Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        },
                                        'Vp9Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        }
                                    },
                                    'ColorMetadata': 'IGNORE'|'INSERT',
                                    'Crop': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                    'FixedAfd': 123,
                                    'Height': 123,
                                    'Position': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                    'Sharpness': 123,
                                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                    'VideoPreprocessors': {
                                        'ColorCorrector': {
                                            'Brightness': 123,
                                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                            'Contrast': 123,
                                            'Hdr10Metadata': {
                                                'BluePrimaryX': 123,
                                                'BluePrimaryY': 123,
                                                'GreenPrimaryX': 123,
                                                'GreenPrimaryY': 123,
                                                'MaxContentLightLevel': 123,
                                                'MaxFrameAverageLightLevel': 123,
                                                'MaxLuminance': 123,
                                                'MinLuminance': 123,
                                                'RedPrimaryX': 123,
                                                'RedPrimaryY': 123,
                                                'WhitePointX': 123,
                                                'WhitePointY': 123
                                            },
                                            'Hue': 123,
                                            'Saturation': 123
                                        },
                                        'Deinterlacer': {
                                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                        },
                                        'DolbyVision': {
                                            'L6Metadata': {
                                                'MaxCll': 123,
                                                'MaxFall': 123
                                            },
                                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                            'Profile': 'PROFILE_5'
                                        },
                                        'ImageInserter': {
                                            'InsertableImages': [
                                                {
                                                    'Duration': 123,
                                                    'FadeIn': 123,
                                                    'FadeOut': 123,
                                                    'Height': 123,
                                                    'ImageInserterInput': 'string',
                                                    'ImageX': 123,
                                                    'ImageY': 123,
                                                    'Layer': 123,
                                                    'Opacity': 123,
                                                    'StartTime': 'string',
                                                    'Width': 123
                                                },
                                            ]
                                        },
                                        'NoiseReducer': {
                                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                            'FilterSettings': {
                                                'Strength': 123
                                            },
                                            'SpatialFilterSettings': {
                                                'PostFilterSharpenStrength': 123,
                                                'Speed': 123,
                                                'Strength': 123
                                            },
                                            'TemporalFilterSettings': {
                                                'AggressiveMode': 123,
                                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                                'Speed': 123,
                                                'Strength': 123
                                            }
                                        },
                                        'PartnerWatermarking': {
                                            'NexguardFileMarkerSettings': {
                                                'License': 'string',
                                                'Payload': 123,
                                                'Preset': 'string',
                                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                            }
                                        },
                                        'TimecodeBurnin': {
                                            'FontSize': 123,
                                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                            'Prefix': 'string'
                                        }
                                    },
                                    'Width': 123
                                }
                            },
                        ]
                    },
                ],
                'TimecodeConfig': {
                    'Anchor': 'string',
                    'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'Start': 'string',
                    'TimestampOffset': 'string'
                },
                'TimedMetadataInsertion': {
                    'Id3Insertions': [
                        {
                            'Id3': 'string',
                            'Timecode': 'string'
                        },
                    ]
                }
            },
            'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • JobTemplates (list) -- List of Job templates.
      • (dict) -- A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
        • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
          • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • Category (string) -- An optional category you create to organize your job templates.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for Job template creation.
        • Description (string) -- An optional description you create for each job template.
        • HopDestinations (list) -- Optional list of hop destinations.
          • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
            • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
            • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
            • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
        • LastUpdated (datetime) -- The timestamp in epoch seconds when the Job template was last updated.
        • Name (string) -- A name you create for each job template. Each name must be unique within your account.
        • Priority (integer) -- Relative priority on the job.
        • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
        • Settings (dict) -- JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.
          • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
          • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
            • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
          • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
            • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
              • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
            • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
            • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
              • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
          • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
            • (dict) -- Specified video input in a template.
              • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                • (string) --
                  • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                    • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                      • (string) --
              • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                • (string) --
                  • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                    • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                    • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                    • LanguageCode (string) -- Selects a specific language code from within an audio source.
                    • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                    • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                      • (integer) --
                    • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                    • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • SelectorType (string) -- Specifies the type of the audio selector.
                    • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                      • (integer) --
              • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                • (string) --
                  • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                    • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                        • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                      • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                        • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                          • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                          • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                        • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                        • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                      • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                      • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                        • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                      • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                        • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
              • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
              • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
              • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
              • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
                • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                  • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                  • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
              • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
              • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
              • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
                • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
                • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
                • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
                • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
                • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
          • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
            • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
              • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
              • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
            • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
            • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
            • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
              • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
              • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
            • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
            • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
          • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
            • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
            • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
          • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
            • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
            • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
            • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
            • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
            • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
            • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
            • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
            • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
            • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
            • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
            • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
          • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
            • (dict) -- Group of outputs
              • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
                • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                  • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                  • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                  • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
              • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
              • Name (string) -- Name of the output group
              • OutputGroupSettings (dict) -- Output Group settings, including type
                • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                    • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                    • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                    • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                  • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                  • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
                • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
                • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                  • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                    • (string) --
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                  • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                  • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                    • (dict) -- Caption Language Mapping
                      • CaptionChannel (integer) -- Caption channel.
                      • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                      • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                      • LanguageDescription (string) -- Caption language description.
                  • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                    • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                    • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                  • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                  • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                  • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                  • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                  • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                  • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                  • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                  • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
                • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                  • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
                • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
              • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
                • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                  • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                    • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                      • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                        • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                      • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                        • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                        • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                        • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                        • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                        • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                        • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                      • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                      • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                      • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                      • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                        • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                          • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                          • CodecProfile (string) -- AAC Profile.
                          • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                          • RateControlMode (string) -- Rate Control Mode.
                          • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                          • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                          • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                          • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                        • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                        • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                          • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                          • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                          • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                          • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                        • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                          • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                          • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                          • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                          • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                          • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                        • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                          • SampleRate (integer) -- Sample rate in hz.
                          • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                        • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                          • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                        • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                          • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                          • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                          • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                        • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                          • SampleRate (integer) -- Sample rate in Hz.
                      • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                      • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                      • RemixSettings (dict) -- Advanced audio remixing settings.
                        • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                          • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                            • (dict) -- OutputChannel mapping settings.
                              • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                                • (integer) --
                              • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                                • (float) --
                        • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                        • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                    • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                      • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                      • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                        • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                        • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                          • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                          • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                          • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                        • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                          • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                        • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                          • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                          • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                            • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                        • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                          • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                        • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                          • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                      • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                      • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • ContainerSettings (dict) -- Container specific settings.
                    • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                      • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                      • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                    • F4vSettings (dict) -- Settings for F4v container
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                      • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                        • (integer) --
                      • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                      • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                      • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                        • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                        • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                        • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                        • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                        • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                        • (integer) --
                      • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                      • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                      • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                      • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                      • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                      • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                      • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                      • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                      • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                      • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                      • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                        • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                      • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                      • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                      • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                      • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                      • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                      • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                    • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                        • (integer) --
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                      • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                      • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                      • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                      • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                      • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                      • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                      • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                      • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                    • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                      • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                      • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                      • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                    • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                      • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                      • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                    • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                      • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • MxfSettings (dict) -- These settings relate to your MXF output container.
                      • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                      • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                  • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                  • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                  • OutputSettings (dict) -- Specific settings for this type of output.
                    • HlsSettings (dict) -- Settings for HLS output groups
                      • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                      • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                      • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                      • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                  • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                  • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                    • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                    • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                    • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                      • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                        • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                        • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                        • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                      • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                        • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                        • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                        • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                        • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                      • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                        • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                        • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                        • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                        • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • H265Settings (dict) -- Settings for H265 codec
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- H.265 Level.
                        • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                        • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                        • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                        • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                      • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                        • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                        • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                      • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                      • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                    • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                    • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                    • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                    • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                    • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                    • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                    • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                    • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                      • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                        • Brightness (integer) -- Brightness level.
                        • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                        • Contrast (integer) -- Contrast level.
                        • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                          • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                          • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                          • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • Hue (integer) -- Hue in degrees.
                        • Saturation (integer) -- Saturation level.
                      • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                        • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                        • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                        • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                      • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                        • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                          • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                          • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                        • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                        • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                      • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                          • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                            • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                            • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                            • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                            • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                            • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                            • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                            • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                            • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                            • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                            • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                            • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                      • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                        • FilterSettings (dict) -- Settings for a noise reducer filter
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                          • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                          • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                          • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                          • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                          • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                          • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                      • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                        • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                          • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                          • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                      • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                        • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                        • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                        • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                    • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
          • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
            • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
            • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
            • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
            • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
          • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
            • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
              • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
                • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
                • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
        • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
        • Type (string) -- A job template can be of two types: system or custom. System or built-in job templates can't be modified or deleted by the user.
    • NextToken (string) -- Use this string to request the next batch of job templates.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
list_jobs(**kwargs)

Retrieve a JSON array of up to twenty of your most recently created jobs. This array includes in-process, completed, and errored jobs. This will return the jobs themselves, not just a list of the jobs. To retrieve the twenty next most recent jobs, use the nextToken string returned with the array.

See also: AWS API Documentation

Request Syntax

response = client.list_jobs(
    MaxResults=123,
    NextToken='string',
    Order='ASCENDING'|'DESCENDING',
    Queue='string',
    Status='SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR'
)
Parameters
  • MaxResults (integer) -- Optional. Number of jobs, up to twenty, that will be returned at one time.
  • NextToken (string) -- Optional. Use this string, provided with the response to a previous request, to request the next batch of jobs.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
  • Queue (string) -- Optional. Provide a queue name to get back only jobs from that queue.
  • Status (string) -- Optional. A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
Return type

dict

Returns

Response Syntax

{
    'Jobs': [
        {
            'AccelerationSettings': {
                'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
            },
            'AccelerationStatus': 'NOT_APPLICABLE'|'IN_PROGRESS'|'ACCELERATED'|'NOT_ACCELERATED',
            'Arn': 'string',
            'BillingTagsSource': 'QUEUE'|'PRESET'|'JOB_TEMPLATE'|'JOB',
            'CreatedAt': datetime(2015, 1, 1),
            'CurrentPhase': 'PROBING'|'TRANSCODING'|'UPLOADING',
            'ErrorCode': 123,
            'ErrorMessage': 'string',
            'HopDestinations': [
                {
                    'Priority': 123,
                    'Queue': 'string',
                    'WaitMinutes': 123
                },
            ],
            'Id': 'string',
            'JobPercentComplete': 123,
            'JobTemplate': 'string',
            'Messages': {
                'Info': [
                    'string',
                ],
                'Warning': [
                    'string',
                ]
            },
            'OutputGroupDetails': [
                {
                    'OutputDetails': [
                        {
                            'DurationInMs': 123,
                            'VideoDetails': {
                                'HeightInPx': 123,
                                'WidthInPx': 123
                            }
                        },
                    ]
                },
            ],
            'Priority': 123,
            'Queue': 'string',
            'QueueTransitions': [
                {
                    'DestinationQueue': 'string',
                    'SourceQueue': 'string',
                    'Timestamp': datetime(2015, 1, 1)
                },
            ],
            'RetryCount': 123,
            'Role': 'string',
            'Settings': {
                'AdAvailOffset': 123,
                'AvailBlanking': {
                    'AvailBlankingImage': 'string'
                },
                'Esam': {
                    'ManifestConfirmConditionNotification': {
                        'MccXml': 'string'
                    },
                    'ResponseSignalPreroll': 123,
                    'SignalProcessingNotification': {
                        'SccXml': 'string'
                    }
                },
                'Inputs': [
                    {
                        'AudioSelectorGroups': {
                            'string': {
                                'AudioSelectorNames': [
                                    'string',
                                ]
                            }
                        },
                        'AudioSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                                'ExternalAudioFileInput': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'Offset': 123,
                                'Pids': [
                                    123,
                                ],
                                'ProgramSelection': 123,
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                                'Tracks': [
                                    123,
                                ]
                            }
                        },
                        'CaptionSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'SourceSettings': {
                                    'AncillarySourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'SourceAncillaryChannelNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'DvbSubSourceSettings': {
                                        'Pid': 123
                                    },
                                    'EmbeddedSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Source608ChannelNumber': 123,
                                        'Source608TrackNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'FileSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Framerate': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123
                                        },
                                        'SourceFile': 'string',
                                        'TimeDelta': 123
                                    },
                                    'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                    'TeletextSourceSettings': {
                                        'PageNumber': 'string'
                                    },
                                    'TrackSourceSettings': {
                                        'TrackNumber': 123
                                    }
                                }
                            }
                        },
                        'Crop': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'DeblockFilter': 'ENABLED'|'DISABLED',
                        'DecryptionSettings': {
                            'DecryptionMode': 'AES_CTR'|'AES_CBC'|'AES_GCM',
                            'EncryptedDecryptionKey': 'string',
                            'InitializationVector': 'string',
                            'KmsKeyRegion': 'string'
                        },
                        'DenoiseFilter': 'ENABLED'|'DISABLED',
                        'FileInput': 'string',
                        'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                        'FilterStrength': 123,
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'InputClippings': [
                            {
                                'EndTimecode': 'string',
                                'StartTimecode': 'string'
                            },
                        ],
                        'InputScanType': 'AUTO'|'PSF',
                        'Position': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'ProgramNumber': 123,
                        'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                        'SupplementalImps': [
                            'string',
                        ],
                        'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                        'TimecodeStart': 'string',
                        'VideoSelector': {
                            'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                            'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                            'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Pid': 123,
                            'ProgramNumber': 123,
                            'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                        }
                    },
                ],
                'MotionImageInserter': {
                    'Framerate': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123
                    },
                    'Input': 'string',
                    'InsertionMode': 'MOV'|'PNG',
                    'Offset': {
                        'ImageX': 123,
                        'ImageY': 123
                    },
                    'Playback': 'ONCE'|'REPEAT',
                    'StartTime': 'string'
                },
                'NielsenConfiguration': {
                    'BreakoutCode': 123,
                    'DistributorId': 'string'
                },
                'NielsenNonLinearWatermark': {
                    'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                    'AdiFilename': 'string',
                    'AssetId': 'string',
                    'AssetName': 'string',
                    'CbetSourceId': 'string',
                    'EpisodeId': 'string',
                    'MetadataDestination': 'string',
                    'SourceId': 123,
                    'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                    'TicServerUrl': 'string',
                    'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
                },
                'OutputGroups': [
                    {
                        'AutomatedEncodingSettings': {
                            'AbrSettings': {
                                'MaxAbrBitrate': 123,
                                'MaxRenditions': 123,
                                'MinAbrBitrate': 123
                            }
                        },
                        'CustomName': 'string',
                        'Name': 'string',
                        'OutputGroupSettings': {
                            'CmafGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'BaseUrl': 'string',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'DashSignaledSystemIds': [
                                            'string',
                                        ],
                                        'HlsSignaledSystemIds': [
                                            'string',
                                        ],
                                        'ResourceId': 'string',
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'FragmentLength': 123,
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'WriteDashManifest': 'DISABLED'|'ENABLED',
                                'WriteHlsManifest': 'DISABLED'|'ENABLED',
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'DashIsoGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                                'BaseUrl': 'string',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'FileGroupSettings': {
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                }
                            },
                            'HlsGroupSettings': {
                                'AdMarkers': [
                                    'ELEMENTAL'|'ELEMENTAL_SCTE35',
                                ],
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                                'BaseUrl': 'string',
                                'CaptionLanguageMappings': [
                                    {
                                        'CaptionChannel': 123,
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinFinalSegmentLength': 123.0,
                                'MinSegmentLength': 123,
                                'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                                'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                                'ProgramDateTimePeriod': 123,
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'SegmentsPerSubdirectory': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                                'TimedMetadataId3Period': 123,
                                'TimestampDeltaMilliseconds': 123
                            },
                            'MsSmoothGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'ManifestEncoding': 'UTF8'|'UTF16'
                            },
                            'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                        },
                        'Outputs': [
                            {
                                'AudioDescriptions': [
                                    {
                                        'AudioChannelTaggingSettings': {
                                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                        },
                                        'AudioNormalizationSettings': {
                                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                            'CorrectionGateLevel': 123,
                                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                            'TargetLkfs': 123.0
                                        },
                                        'AudioSourceName': 'string',
                                        'AudioType': 123,
                                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'CodecSettings': {
                                            'AacSettings': {
                                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                                'Bitrate': 123,
                                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                                'RateControlMode': 'CBR'|'VBR',
                                                'RawFormat': 'LATM_LOAS'|'NONE',
                                                'SampleRate': 123,
                                                'Specification': 'MPEG2'|'MPEG4',
                                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                            },
                                            'Ac3Settings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'SampleRate': 123
                                            },
                                            'AiffSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                            'Eac3AtmosSettings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN',
                                                'CodingMode': 'CODING_MODE_9_1_6',
                                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                                'SampleRate': 123,
                                                'SpeechThreshold': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Eac3Settings': {
                                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                                'DcFilter': 'ENABLED'|'DISABLED',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LfeControl': 'LFE'|'NO_LFE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                                'SampleRate': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Mp2Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Mp3Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'RateControlMode': 'CBR'|'VBR',
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'OpusSettings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'VorbisSettings': {
                                                'Channels': 123,
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'WavSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'Format': 'RIFF'|'RF64',
                                                'SampleRate': 123
                                            }
                                        },
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'RemixSettings': {
                                            'ChannelMapping': {
                                                'OutputChannels': [
                                                    {
                                                        'InputChannels': [
                                                            123,
                                                        ],
                                                        'InputChannelsFineTune': [
                                                            123.0,
                                                        ]
                                                    },
                                                ]
                                            },
                                            'ChannelsIn': 123,
                                            'ChannelsOut': 123
                                        },
                                        'StreamName': 'string'
                                    },
                                ],
                                'CaptionDescriptions': [
                                    {
                                        'CaptionSelectorName': 'string',
                                        'CustomLanguageCode': 'string',
                                        'DestinationSettings': {
                                            'BurninDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                            'DvbSubDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'EmbeddedDestinationSettings': {
                                                'Destination608ChannelNumber': 123,
                                                'Destination708ServiceNumber': 123
                                            },
                                            'ImscDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'SccDestinationSettings': {
                                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                            },
                                            'TeletextDestinationSettings': {
                                                'PageNumber': 'string',
                                                'PageTypes': [
                                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                                ]
                                            },
                                            'TtmlDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'WebvttDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            }
                                        },
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'ContainerSettings': {
                                    'CmfcSettings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioGroupId': 'string',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                    'F4vSettings': {
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                    },
                                    'M2tsSettings': {
                                        'AudioBufferModel': 'DVB'|'ATSC',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'Bitrate': 123,
                                        'BufferModel': 'MULTIPLEX'|'NONE',
                                        'DvbNitSettings': {
                                            'NetworkId': 123,
                                            'NetworkName': 'string',
                                            'NitInterval': 123
                                        },
                                        'DvbSdtSettings': {
                                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                            'SdtInterval': 123,
                                            'ServiceName': 'string',
                                            'ServiceProviderName': 'string'
                                        },
                                        'DvbSubPids': [
                                            123,
                                        ],
                                        'DvbTdtSettings': {
                                            'TdtInterval': 123
                                        },
                                        'DvbTeletextPid': 123,
                                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                        'FragmentTime': 123.0,
                                        'MaxPcrInterval': 123,
                                        'MinEbpInterval': 123,
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'NullPacketBitrate': 123.0,
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'RateMode': 'VBR'|'CBR',
                                        'Scte35Esam': {
                                            'Scte35EsamPid': 123
                                        },
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                        'SegmentationTime': 123.0,
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'M3u8Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'MovSettings': {
                                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                        'PaddingControl': 'OMNEON'|'NONE',
                                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                    },
                                    'Mp4Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'CttsVersion': 123,
                                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                        'Mp4MajorBrand': 'string'
                                    },
                                    'MpdSettings': {
                                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'MxfSettings': {
                                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                                    }
                                },
                                'Extension': 'string',
                                'NameModifier': 'string',
                                'OutputSettings': {
                                    'HlsSettings': {
                                        'AudioGroupId': 'string',
                                        'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'SegmentModifier': 'string'
                                    }
                                },
                                'Preset': 'string',
                                'VideoDescription': {
                                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                    'AntiAlias': 'DISABLED'|'ENABLED',
                                    'CodecSettings': {
                                        'Av1Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'MaxBitrate': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'QvbrSettings': {
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'QVBR',
                                            'Slices': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'AvcIntraSettings': {
                                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                            'AvcIntraUhdSettings': {
                                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                            },
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                        'FrameCaptureSettings': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'MaxCaptures': 123,
                                            'Quality': 123
                                        },
                                        'H264Settings': {
                                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'EntropyEncoding': 'CABAC'|'CAVLC',
                                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'RepeatPps': 'DISABLED'|'ENABLED',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'RP2027',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                        },
                                        'H265Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'TemporalIds': 'DISABLED'|'ENABLED',
                                            'Tiles': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                        },
                                        'Mpeg2Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                            'CodecProfile': 'MAIN'|'PROFILE_422',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                            'RateControlMode': 'VBR'|'CBR',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'D_10',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'ProresSettings': {
                                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Vc3Settings': {
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD',
                                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                        },
                                        'Vp8Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        },
                                        'Vp9Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        }
                                    },
                                    'ColorMetadata': 'IGNORE'|'INSERT',
                                    'Crop': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                    'FixedAfd': 123,
                                    'Height': 123,
                                    'Position': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                    'Sharpness': 123,
                                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                    'VideoPreprocessors': {
                                        'ColorCorrector': {
                                            'Brightness': 123,
                                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                            'Contrast': 123,
                                            'Hdr10Metadata': {
                                                'BluePrimaryX': 123,
                                                'BluePrimaryY': 123,
                                                'GreenPrimaryX': 123,
                                                'GreenPrimaryY': 123,
                                                'MaxContentLightLevel': 123,
                                                'MaxFrameAverageLightLevel': 123,
                                                'MaxLuminance': 123,
                                                'MinLuminance': 123,
                                                'RedPrimaryX': 123,
                                                'RedPrimaryY': 123,
                                                'WhitePointX': 123,
                                                'WhitePointY': 123
                                            },
                                            'Hue': 123,
                                            'Saturation': 123
                                        },
                                        'Deinterlacer': {
                                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                        },
                                        'DolbyVision': {
                                            'L6Metadata': {
                                                'MaxCll': 123,
                                                'MaxFall': 123
                                            },
                                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                            'Profile': 'PROFILE_5'
                                        },
                                        'ImageInserter': {
                                            'InsertableImages': [
                                                {
                                                    'Duration': 123,
                                                    'FadeIn': 123,
                                                    'FadeOut': 123,
                                                    'Height': 123,
                                                    'ImageInserterInput': 'string',
                                                    'ImageX': 123,
                                                    'ImageY': 123,
                                                    'Layer': 123,
                                                    'Opacity': 123,
                                                    'StartTime': 'string',
                                                    'Width': 123
                                                },
                                            ]
                                        },
                                        'NoiseReducer': {
                                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                            'FilterSettings': {
                                                'Strength': 123
                                            },
                                            'SpatialFilterSettings': {
                                                'PostFilterSharpenStrength': 123,
                                                'Speed': 123,
                                                'Strength': 123
                                            },
                                            'TemporalFilterSettings': {
                                                'AggressiveMode': 123,
                                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                                'Speed': 123,
                                                'Strength': 123
                                            }
                                        },
                                        'PartnerWatermarking': {
                                            'NexguardFileMarkerSettings': {
                                                'License': 'string',
                                                'Payload': 123,
                                                'Preset': 'string',
                                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                            }
                                        },
                                        'TimecodeBurnin': {
                                            'FontSize': 123,
                                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                            'Prefix': 'string'
                                        }
                                    },
                                    'Width': 123
                                }
                            },
                        ]
                    },
                ],
                'TimecodeConfig': {
                    'Anchor': 'string',
                    'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'Start': 'string',
                    'TimestampOffset': 'string'
                },
                'TimedMetadataInsertion': {
                    'Id3Insertions': [
                        {
                            'Id3': 'string',
                            'Timecode': 'string'
                        },
                    ]
                }
            },
            'SimulateReservedQueue': 'DISABLED'|'ENABLED',
            'Status': 'SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR',
            'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
            'Timing': {
                'FinishTime': datetime(2015, 1, 1),
                'StartTime': datetime(2015, 1, 1),
                'SubmitTime': datetime(2015, 1, 1)
            },
            'UserMetadata': {
                'string': 'string'
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --
    • Jobs (list) -- List of jobs
      • (dict) -- Each job converts an input file into an output file or files. For more information, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
        • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
          • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
        • AccelerationStatus (string) -- Describes whether the current job is running with accelerated transcoding. For jobs that have Acceleration (AccelerationMode) set to DISABLED, AccelerationStatus is always NOT_APPLICABLE. For jobs that have Acceleration (AccelerationMode) set to ENABLED or PREFERRED, AccelerationStatus is one of the other states. AccelerationStatus is IN_PROGRESS initially, while the service determines whether the input files and job settings are compatible with accelerated transcoding. If they are, AcclerationStatus is ACCELERATED. If your input files and job settings aren't compatible with accelerated transcoding, the service either fails your job or runs it without accelerated transcoding, depending on how you set Acceleration (AccelerationMode). When the service runs your job without accelerated transcoding, AccelerationStatus is NOT_ACCELERATED.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • BillingTagsSource (string) -- The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any billing report that you set up.
        • CreatedAt (datetime) -- The time, in Unix epoch format in seconds, when the job got created.
        • CurrentPhase (string) -- A job's phase can be PROBING, TRANSCODING OR UPLOADING
        • ErrorCode (integer) -- Error code for the job
        • ErrorMessage (string) -- Error message of Job
        • HopDestinations (list) -- Optional list of hop destinations.
          • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
            • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
            • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
            • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
        • Id (string) -- A portion of the job's ARN, unique within your AWS Elemental MediaConvert resources
        • JobPercentComplete (integer) -- An estimate of how far your job has progressed. This estimate is shown as a percentage of the total time from when your job leaves its queue to when your output files appear in your output Amazon S3 bucket. AWS Elemental MediaConvert provides jobPercentComplete in CloudWatch STATUS_UPDATE events and in the response to GetJob and ListJobs requests. The jobPercentComplete estimate is reliable for the following input containers: Quicktime, Transport Stream, MP4, and MXF. For some jobs, the service can't provide information about job progress. In those cases, jobPercentComplete returns a null value.
        • JobTemplate (string) -- The job template that the job is created from, if it is created from a job template.
        • Messages (dict) -- Provides messages from the service about jobs that you have already successfully submitted.
          • Info (list) -- List of messages that are informational only and don't indicate a problem with your job.
            • (string) --
          • Warning (list) -- List of messages that warn about conditions that might cause your job not to run or to fail.
            • (string) --
        • OutputGroupDetails (list) -- List of output group details
          • (dict) -- Contains details about the output groups specified in the job settings.
            • OutputDetails (list) -- Details about the output
              • (dict) -- Details regarding output
                • DurationInMs (integer) -- Duration in milliseconds
                • VideoDetails (dict) -- Contains details about the output's video stream
                  • HeightInPx (integer) -- Height in pixels for the output
                  • WidthInPx (integer) -- Width in pixels for the output
        • Priority (integer) -- Relative priority on the job.
        • Queue (string) -- When you create a job, you can specify a queue to send it to. If you don't specify, the job will go to the default queue. For more about queues, see the User Guide topic at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
        • QueueTransitions (list) -- The job's queue hopping history.
          • (dict) -- Description of the source and destination queues between which the job has moved, along with the timestamp of the move
            • DestinationQueue (string) -- The queue that the job was on after the transition.
            • SourceQueue (string) -- The queue that the job was on before the transition.
            • Timestamp (datetime) -- The time, in Unix epoch format, that the job moved from the source queue to the destination queue.
        • RetryCount (integer) -- The number of times that the service automatically attempted to process your job after encountering an error.
        • Role (string) -- The IAM role you use for creating this job. For details about permissions, see the User Guide topic at the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/iam-role.html
        • Settings (dict) -- JobSettings contains all the transcode settings for a job.
          • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
          • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
            • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
          • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
            • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
              • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
            • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
            • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
              • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
          • Inputs (list) -- Use Inputs (inputs) to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
            • (dict) -- Use inputs to define the source files used in your transcoding job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/specify-input-settings.html. You can use multiple video inputs to do input stitching. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html
              • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                • (string) --
                  • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                    • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                      • (string) --
              • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                • (string) --
                  • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                    • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                    • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                    • LanguageCode (string) -- Selects a specific language code from within an audio source.
                    • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                    • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                      • (integer) --
                    • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                    • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • SelectorType (string) -- Specifies the type of the audio selector.
                    • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                      • (integer) --
              • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                • (string) --
                  • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                    • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                        • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                      • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                        • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                          • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                          • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                        • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                        • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                      • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                      • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                        • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                      • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                        • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
              • DecryptionSettings (dict) -- Settings for decrypting any input files that you encrypt before you upload them to Amazon S3. MediaConvert can decrypt files only when you use AWS Key Management Service (KMS) to encrypt the data key that you use to encrypt your content.
                • DecryptionMode (string) -- Specify the encryption mode that you used to encrypt your input files.
                • EncryptedDecryptionKey (string) -- Warning! Don't provide your encryption key in plaintext. Your job settings could be intercepted, making your encrypted content vulnerable. Specify the encrypted version of the data key that you used to encrypt your content. The data key must be encrypted by AWS Key Management Service (KMS). The key can be 128, 192, or 256 bits.
                • InitializationVector (string) -- Specify the initialization vector that you used when you encrypted your content before uploading it to Amazon S3. You can use a 16-byte initialization vector with any encryption mode. Or, you can use a 12-byte initialization vector with GCM or CTR. MediaConvert accepts only initialization vectors that are base64-encoded.
                • KmsKeyRegion (string) -- Specify the AWS Region for AWS Key Management Service (KMS) that you used to encrypt your data key, if that Region is different from the one you are using for AWS Elemental MediaConvert.
              • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
              • FileInput (string) -- Specify the source file for your transcoding job. You can use multiple inputs in a single job. The service concatenates these inputs, in the order that you specify them in the job, to create the outputs. If your input format is IMF, specify your input by providing the path to your CPL. For example, "s3://bucket/vf/cpl.xml". If the CPL is in an incomplete IMP, make sure to use Supplemental IMPs (SupplementalImps) to specify any supplemental IMPs that contain assets referenced by the CPL.
              • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
              • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
              • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
                • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                  • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                  • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
              • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
              • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
              • SupplementalImps (list) -- Provide a list of any necessary supplemental IMPs. You need supplemental IMPs if the CPL that you're using for your input is in an incomplete IMP. Specify either the supplemental IMP directories with a trailing slash or the ASSETMAP.xml files. For example ["s3://bucket/ov/", "s3://bucket/vf2/ASSETMAP.xml"]. You don't need to specify the IMP that contains your input CPL, because the service automatically detects it.
                • (string) --
              • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
                • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
                • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
                • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
                • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
                • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
          • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
            • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
              • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
              • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
            • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
            • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
            • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
              • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
              • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
            • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
            • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
          • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
            • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
            • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
          • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
            • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
            • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
            • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
            • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
            • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
            • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
            • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
            • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
            • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
            • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
            • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
          • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
            • (dict) -- Group of outputs
              • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
                • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                  • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                  • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                  • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
              • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
              • Name (string) -- Name of the output group
              • OutputGroupSettings (dict) -- Output Group settings, including type
                • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                    • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                    • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                    • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                  • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                  • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
                • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
                • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                  • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                    • (string) --
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                  • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                  • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                    • (dict) -- Caption Language Mapping
                      • CaptionChannel (integer) -- Caption channel.
                      • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                      • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                      • LanguageDescription (string) -- Caption language description.
                  • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                    • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                    • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                  • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                  • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                  • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                  • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                  • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                  • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                  • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                  • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
                • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                  • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
                • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
              • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
                • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                  • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                    • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                      • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                        • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                      • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                        • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                        • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                        • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                        • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                        • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                        • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                      • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                      • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                      • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                      • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                        • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                          • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                          • CodecProfile (string) -- AAC Profile.
                          • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                          • RateControlMode (string) -- Rate Control Mode.
                          • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                          • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                          • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                          • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                        • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                        • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                          • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                          • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                          • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                          • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                        • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                          • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                          • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                          • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                          • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                          • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                        • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                          • SampleRate (integer) -- Sample rate in hz.
                          • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                        • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                          • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                        • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                          • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                          • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                          • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                        • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                          • SampleRate (integer) -- Sample rate in Hz.
                      • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                      • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                      • RemixSettings (dict) -- Advanced audio remixing settings.
                        • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                          • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                            • (dict) -- OutputChannel mapping settings.
                              • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                                • (integer) --
                              • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                                • (float) --
                        • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                        • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                    • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                      • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                      • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                        • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                        • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                          • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                          • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                          • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                        • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                          • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                        • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                          • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                          • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                            • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                        • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                          • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                        • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                          • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                      • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                      • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • ContainerSettings (dict) -- Container specific settings.
                    • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                      • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                      • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                    • F4vSettings (dict) -- Settings for F4v container
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                      • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                        • (integer) --
                      • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                      • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                      • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                        • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                        • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                        • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                        • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                        • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                        • (integer) --
                      • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                      • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                      • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                      • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                      • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                      • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                      • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                      • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                      • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                      • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                      • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                        • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                      • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                      • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                      • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                      • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                      • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                      • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                    • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                        • (integer) --
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                      • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                      • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                      • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                      • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                      • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                      • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                      • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                      • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                    • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                      • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                      • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                      • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                    • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                      • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                      • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                    • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                      • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • MxfSettings (dict) -- These settings relate to your MXF output container.
                      • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                      • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                  • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                  • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                  • OutputSettings (dict) -- Specific settings for this type of output.
                    • HlsSettings (dict) -- Settings for HLS output groups
                      • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                      • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                      • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                      • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                  • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                  • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                    • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                    • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                    • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                      • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                        • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                        • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                        • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                      • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                        • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                        • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                        • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                        • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                      • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                        • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                        • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                        • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                        • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • H265Settings (dict) -- Settings for H265 codec
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- H.265 Level.
                        • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                        • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                        • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                        • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                      • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                        • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                        • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                      • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                      • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                    • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                    • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                    • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                    • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                    • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                    • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                    • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                    • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                      • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                        • Brightness (integer) -- Brightness level.
                        • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                        • Contrast (integer) -- Contrast level.
                        • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                          • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                          • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                          • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • Hue (integer) -- Hue in degrees.
                        • Saturation (integer) -- Saturation level.
                      • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                        • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                        • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                        • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                      • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                        • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                          • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                          • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                        • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                        • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                      • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                          • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                            • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                            • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                            • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                            • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                            • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                            • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                            • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                            • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                            • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                            • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                            • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                      • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                        • FilterSettings (dict) -- Settings for a noise reducer filter
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                          • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                          • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                          • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                          • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                          • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                          • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                      • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                        • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                          • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                          • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                      • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                        • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                        • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                        • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                    • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
          • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
            • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
            • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
            • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
            • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
          • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
            • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
              • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
                • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
                • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
        • SimulateReservedQueue (string) -- Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need. When this is enabled, MediaConvert runs your job from an on-demand queue with similar performance to what you will see with one RTS in a reserved queue. This setting is disabled by default.
        • Status (string) -- A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
        • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
        • Timing (dict) -- Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
          • FinishTime (datetime) -- The time, in Unix epoch format, that the transcoding job finished
          • StartTime (datetime) -- The time, in Unix epoch format, that transcoding for the job began.
          • SubmitTime (datetime) -- The time, in Unix epoch format, that you submitted the job.
        • UserMetadata (dict) -- User-defined metadata that you want to associate with an MediaConvert job. You specify metadata in key/value pairs.
          • (string) --
            • (string) --
    • NextToken (string) -- Use this string to request the next batch of jobs.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
list_presets(**kwargs)

Retrieve a JSON array of up to twenty of your presets. This will return the presets themselves, not just a list of them. To retrieve the next twenty presets, use the nextToken string returned with the array.

See also: AWS API Documentation

Request Syntax

response = client.list_presets(
    Category='string',
    ListBy='NAME'|'CREATION_DATE'|'SYSTEM',
    MaxResults=123,
    NextToken='string',
    Order='ASCENDING'|'DESCENDING'
)
Parameters
  • Category (string) -- Optionally, specify a preset category to limit responses to only presets from that category.
  • ListBy (string) -- Optional. When you request a list of presets, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.
  • MaxResults (integer) -- Optional. Number of presets, up to twenty, that will be returned at one time
  • NextToken (string) -- Use this string, provided with the response to a previous request, to request the next batch of presets.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
Return type

dict

Returns

Response Syntax

{
    'NextToken': 'string',
    'Presets': [
        {
            'Arn': 'string',
            'Category': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'Settings': {
                'AudioDescriptions': [
                    {
                        'AudioChannelTaggingSettings': {
                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                        },
                        'AudioNormalizationSettings': {
                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                            'CorrectionGateLevel': 123,
                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                            'TargetLkfs': 123.0
                        },
                        'AudioSourceName': 'string',
                        'AudioType': 123,
                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'CodecSettings': {
                            'AacSettings': {
                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                'Bitrate': 123,
                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                'RateControlMode': 'CBR'|'VBR',
                                'RawFormat': 'LATM_LOAS'|'NONE',
                                'SampleRate': 123,
                                'Specification': 'MPEG2'|'MPEG4',
                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                            },
                            'Ac3Settings': {
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                'Dialnorm': 123,
                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                'LfeFilter': 'ENABLED'|'DISABLED',
                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'SampleRate': 123
                            },
                            'AiffSettings': {
                                'BitDepth': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                            'Eac3AtmosSettings': {
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN',
                                'CodingMode': 'CODING_MODE_9_1_6',
                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'LoRoCenterMixLevel': 123.0,
                                'LoRoSurroundMixLevel': 123.0,
                                'LtRtCenterMixLevel': 123.0,
                                'LtRtSurroundMixLevel': 123.0,
                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                'SampleRate': 123,
                                'SpeechThreshold': 123,
                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                            },
                            'Eac3Settings': {
                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                'DcFilter': 'ENABLED'|'DISABLED',
                                'Dialnorm': 123,
                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'LfeControl': 'LFE'|'NO_LFE',
                                'LfeFilter': 'ENABLED'|'DISABLED',
                                'LoRoCenterMixLevel': 123.0,
                                'LoRoSurroundMixLevel': 123.0,
                                'LtRtCenterMixLevel': 123.0,
                                'LtRtSurroundMixLevel': 123.0,
                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                'SampleRate': 123,
                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                            },
                            'Mp2Settings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'Mp3Settings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'RateControlMode': 'CBR'|'VBR',
                                'SampleRate': 123,
                                'VbrQuality': 123
                            },
                            'OpusSettings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'VorbisSettings': {
                                'Channels': 123,
                                'SampleRate': 123,
                                'VbrQuality': 123
                            },
                            'WavSettings': {
                                'BitDepth': 123,
                                'Channels': 123,
                                'Format': 'RIFF'|'RF64',
                                'SampleRate': 123
                            }
                        },
                        'CustomLanguageCode': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'RemixSettings': {
                            'ChannelMapping': {
                                'OutputChannels': [
                                    {
                                        'InputChannels': [
                                            123,
                                        ],
                                        'InputChannelsFineTune': [
                                            123.0,
                                        ]
                                    },
                                ]
                            },
                            'ChannelsIn': 123,
                            'ChannelsOut': 123
                        },
                        'StreamName': 'string'
                    },
                ],
                'CaptionDescriptions': [
                    {
                        'CustomLanguageCode': 'string',
                        'DestinationSettings': {
                            'BurninDestinationSettings': {
                                'Alignment': 'CENTERED'|'LEFT',
                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                'BackgroundOpacity': 123,
                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'FontOpacity': 123,
                                'FontResolution': 123,
                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                'FontSize': 123,
                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'OutlineSize': 123,
                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                'ShadowOpacity': 123,
                                'ShadowXOffset': 123,
                                'ShadowYOffset': 123,
                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                'XPosition': 123,
                                'YPosition': 123
                            },
                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                            'DvbSubDestinationSettings': {
                                'Alignment': 'CENTERED'|'LEFT',
                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                'BackgroundOpacity': 123,
                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'FontOpacity': 123,
                                'FontResolution': 123,
                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                'FontSize': 123,
                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'OutlineSize': 123,
                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                'ShadowOpacity': 123,
                                'ShadowXOffset': 123,
                                'ShadowYOffset': 123,
                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                'XPosition': 123,
                                'YPosition': 123
                            },
                            'EmbeddedDestinationSettings': {
                                'Destination608ChannelNumber': 123,
                                'Destination708ServiceNumber': 123
                            },
                            'ImscDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            },
                            'SccDestinationSettings': {
                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                            },
                            'TeletextDestinationSettings': {
                                'PageNumber': 'string',
                                'PageTypes': [
                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                ]
                            },
                            'TtmlDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            },
                            'WebvttDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            }
                        },
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'LanguageDescription': 'string'
                    },
                ],
                'ContainerSettings': {
                    'CmfcSettings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioGroupId': 'string',
                        'AudioRenditionSets': 'string',
                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                        'Scte35Esam': 'INSERT'|'NONE',
                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                    },
                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                    'F4vSettings': {
                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                    },
                    'M2tsSettings': {
                        'AudioBufferModel': 'DVB'|'ATSC',
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioFramesPerPes': 123,
                        'AudioPids': [
                            123,
                        ],
                        'Bitrate': 123,
                        'BufferModel': 'MULTIPLEX'|'NONE',
                        'DvbNitSettings': {
                            'NetworkId': 123,
                            'NetworkName': 'string',
                            'NitInterval': 123
                        },
                        'DvbSdtSettings': {
                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                            'SdtInterval': 123,
                            'ServiceName': 'string',
                            'ServiceProviderName': 'string'
                        },
                        'DvbSubPids': [
                            123,
                        ],
                        'DvbTdtSettings': {
                            'TdtInterval': 123
                        },
                        'DvbTeletextPid': 123,
                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                        'FragmentTime': 123.0,
                        'MaxPcrInterval': 123,
                        'MinEbpInterval': 123,
                        'NielsenId3': 'INSERT'|'NONE',
                        'NullPacketBitrate': 123.0,
                        'PatInterval': 123,
                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                        'PcrPid': 123,
                        'PmtInterval': 123,
                        'PmtPid': 123,
                        'PrivateMetadataPid': 123,
                        'ProgramNumber': 123,
                        'RateMode': 'VBR'|'CBR',
                        'Scte35Esam': {
                            'Scte35EsamPid': 123
                        },
                        'Scte35Pid': 123,
                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                        'SegmentationTime': 123.0,
                        'TimedMetadataPid': 123,
                        'TransportStreamId': 123,
                        'VideoPid': 123
                    },
                    'M3u8Settings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioFramesPerPes': 123,
                        'AudioPids': [
                            123,
                        ],
                        'NielsenId3': 'INSERT'|'NONE',
                        'PatInterval': 123,
                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                        'PcrPid': 123,
                        'PmtInterval': 123,
                        'PmtPid': 123,
                        'PrivateMetadataPid': 123,
                        'ProgramNumber': 123,
                        'Scte35Pid': 123,
                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                        'TimedMetadataPid': 123,
                        'TransportStreamId': 123,
                        'VideoPid': 123
                    },
                    'MovSettings': {
                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                        'PaddingControl': 'OMNEON'|'NONE',
                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                    },
                    'Mp4Settings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                        'CttsVersion': 123,
                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                        'Mp4MajorBrand': 'string'
                    },
                    'MpdSettings': {
                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                        'Scte35Esam': 'INSERT'|'NONE',
                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                    },
                    'MxfSettings': {
                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                    }
                },
                'VideoDescription': {
                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                    'AntiAlias': 'DISABLED'|'ENABLED',
                    'CodecSettings': {
                        'Av1Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'MaxBitrate': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'QvbrSettings': {
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'QVBR',
                            'Slices': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                        },
                        'AvcIntraSettings': {
                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                            'AvcIntraUhdSettings': {
                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                            },
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD'
                        },
                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                        'FrameCaptureSettings': {
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'MaxCaptures': 123,
                            'Quality': 123
                        },
                        'H264Settings': {
                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'EntropyEncoding': 'CABAC'|'CAVLC',
                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopBReference': 'DISABLED'|'ENABLED',
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'NumberReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                            'QvbrSettings': {
                                'MaxAverageBitrate': 123,
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                            'RepeatPps': 'DISABLED'|'ENABLED',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                            'Slices': 123,
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Softness': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Syntax': 'DEFAULT'|'RP2027',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                        },
                        'H265Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopBReference': 'DISABLED'|'ENABLED',
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'NumberReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                            'QvbrSettings': {
                                'MaxAverageBitrate': 123,
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                            'Slices': 123,
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'TemporalIds': 'DISABLED'|'ENABLED',
                            'Tiles': 'DISABLED'|'ENABLED',
                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                        },
                        'Mpeg2Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                            'CodecProfile': 'MAIN'|'PROFILE_422',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                            'RateControlMode': 'VBR'|'CBR',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Softness': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Syntax': 'DEFAULT'|'D_10',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                        },
                        'ProresSettings': {
                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD'
                        },
                        'Vc3Settings': {
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD',
                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                        },
                        'Vp8Settings': {
                            'Bitrate': 123,
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'HrdBufferSize': 123,
                            'MaxBitrate': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                            'RateControlMode': 'VBR'
                        },
                        'Vp9Settings': {
                            'Bitrate': 123,
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'HrdBufferSize': 123,
                            'MaxBitrate': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                            'RateControlMode': 'VBR'
                        }
                    },
                    'ColorMetadata': 'IGNORE'|'INSERT',
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                    'FixedAfd': 123,
                    'Height': 123,
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                    'Sharpness': 123,
                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                    'VideoPreprocessors': {
                        'ColorCorrector': {
                            'Brightness': 123,
                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                            'Contrast': 123,
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Hue': 123,
                            'Saturation': 123
                        },
                        'Deinterlacer': {
                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                        },
                        'DolbyVision': {
                            'L6Metadata': {
                                'MaxCll': 123,
                                'MaxFall': 123
                            },
                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                            'Profile': 'PROFILE_5'
                        },
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'NoiseReducer': {
                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                            'FilterSettings': {
                                'Strength': 123
                            },
                            'SpatialFilterSettings': {
                                'PostFilterSharpenStrength': 123,
                                'Speed': 123,
                                'Strength': 123
                            },
                            'TemporalFilterSettings': {
                                'AggressiveMode': 123,
                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                'Speed': 123,
                                'Strength': 123
                            }
                        },
                        'PartnerWatermarking': {
                            'NexguardFileMarkerSettings': {
                                'License': 'string',
                                'Payload': 123,
                                'Preset': 'string',
                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                            }
                        },
                        'TimecodeBurnin': {
                            'FontSize': 123,
                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                            'Prefix': 'string'
                        }
                    },
                    'Width': 123
                }
            },
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ]
}

Response Structure

  • (dict) --
    • NextToken (string) -- Use this string to request the next batch of presets.
    • Presets (list) -- List of presets
      • (dict) -- A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • Category (string) -- An optional category you create to organize your presets.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for preset creation.
        • Description (string) -- An optional description you create for each preset.
        • LastUpdated (datetime) -- The timestamp in epoch seconds when the preset was last updated.
        • Name (string) -- A name you create for each preset. Each name must be unique within your account.
        • Settings (dict) -- Settings for preset
          • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
            • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
              • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
              • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
              • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
              • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
              • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
              • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                  • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                  • CodecProfile (string) -- AAC Profile.
                  • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                  • RateControlMode (string) -- Rate Control Mode.
                  • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                  • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                  • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                  • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                  • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                  • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                  • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                  • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                  • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                  • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                  • SampleRate (integer) -- Sample rate in hz.
                • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                  • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                  • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                  • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                  • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                  • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                  • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                  • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                  • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                  • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                  • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                  • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                  • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                  • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                  • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                  • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                  • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                  • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                  • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                  • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                  • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                  • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                  • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                  • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                  • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                  • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                  • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second.
                  • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                  • SampleRate (integer) -- Sample rate in hz.
                • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                  • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                  • SampleRate (integer) -- Sample rate in hz.
                  • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                  • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                  • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                  • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                  • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                  • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                  • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                  • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                  • SampleRate (integer) -- Sample rate in Hz.
              • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
              • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
              • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
              • RemixSettings (dict) -- Advanced audio remixing settings.
                • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                  • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                    • (dict) -- OutputChannel mapping settings.
                      • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                        • (integer) --
                      • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                        • (float) --
                • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
          • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
            • (dict) -- Caption Description for preset
              • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
              • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                  • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                  • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                  • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                  • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                  • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                  • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                  • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                  • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                  • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                  • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                  • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                  • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                  • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                  • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                  • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                  • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                  • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                  • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                  • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                  • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                  • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                  • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                  • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                  • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                  • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                  • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                  • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                    • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                  • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                  • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
              • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
              • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
          • ContainerSettings (dict) -- Container specific settings.
            • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
              • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
              • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
              • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
              • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
              • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
            • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
            • F4vSettings (dict) -- Settings for F4v container
              • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
            • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
              • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
              • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                • (integer) --
              • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
              • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
              • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
              • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                • (integer) --
              • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
              • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
              • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
              • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
              • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
              • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
              • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
              • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
              • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
              • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
              • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
              • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
              • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
              • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
              • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
              • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
              • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
              • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
              • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
              • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
              • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
              • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
              • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
              • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
              • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
              • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
            • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
              • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                • (integer) --
              • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
              • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
              • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
              • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
              • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
              • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
              • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
              • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
              • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
              • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
              • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
              • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
            • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
              • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
              • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
              • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
              • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
              • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
            • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
              • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
              • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
              • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
              • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
            • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
              • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
              • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
            • MxfSettings (dict) -- These settings relate to your MXF output container.
              • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
              • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
          • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
            • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
            • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
            • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
              • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
              • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
              • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
              • H265Settings (dict) -- Settings for H265 codec
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- H.265 Level.
                • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
              • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
              • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
              • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
              • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
            • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
            • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
            • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
            • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
            • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
            • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
            • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
              • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                • Brightness (integer) -- Brightness level.
                • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                • Contrast (integer) -- Contrast level.
                • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Hue (integer) -- Hue in degrees.
                • Saturation (integer) -- Saturation level.
              • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
              • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                  • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                  • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
              • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                • FilterSettings (dict) -- Settings for a noise reducer filter
                  • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                  • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                  • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                  • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                  • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                  • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                  • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                  • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
              • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                  • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                  • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                  • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                  • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
              • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
            • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • Type (string) -- A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
list_queues(**kwargs)

Retrieve a JSON array of up to twenty of your queues. This will return the queues themselves, not just a list of them. To retrieve the next twenty queues, use the nextToken string returned with the array.

See also: AWS API Documentation

Request Syntax

response = client.list_queues(
    ListBy='NAME'|'CREATION_DATE',
    MaxResults=123,
    NextToken='string',
    Order='ASCENDING'|'DESCENDING'
)
Parameters
  • ListBy (string) -- Optional. When you request a list of queues, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by creation date.
  • MaxResults (integer) -- Optional. Number of queues, up to twenty, that will be returned at one time.
  • NextToken (string) -- Use this string, provided with the response to a previous request, to request the next batch of queues.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
Return type

dict

Returns

Response Syntax

{
    'NextToken': 'string',
    'Queues': [
        {
            'Arn': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'PricingPlan': 'ON_DEMAND'|'RESERVED',
            'ProgressingJobsCount': 123,
            'ReservationPlan': {
                'Commitment': 'ONE_YEAR',
                'ExpiresAt': datetime(2015, 1, 1),
                'PurchasedAt': datetime(2015, 1, 1),
                'RenewalType': 'AUTO_RENEW'|'EXPIRE',
                'ReservedSlots': 123,
                'Status': 'ACTIVE'|'EXPIRED'
            },
            'Status': 'ACTIVE'|'PAUSED',
            'SubmittedJobsCount': 123,
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ]
}

Response Structure

  • (dict) --
    • NextToken (string) -- Use this string to request the next batch of queues.
    • Queues (list) -- List of queues.
      • (dict) -- You can use queues to manage the resources that are available to your AWS account for running multiple transcoding jobs at the same time. If you don't specify a queue, the service sends all jobs through the default queue. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for when you created the queue.
        • Description (string) -- An optional description that you create for each queue.
        • LastUpdated (datetime) -- The timestamp in epoch seconds for when you most recently updated the queue.
        • Name (string) -- A name that you create for each queue. Each name must be unique within your account.
        • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment.
        • ProgressingJobsCount (integer) -- The estimated number of jobs with a PROGRESSING status.
        • ReservationPlan (dict) -- Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.
          • Commitment (string) -- The length of the term of your reserved queue pricing plan commitment.
          • ExpiresAt (datetime) -- The timestamp in epoch seconds for when the current pricing plan term for this reserved queue expires.
          • PurchasedAt (datetime) -- The timestamp in epoch seconds for when you set up the current pricing plan for this reserved queue.
          • RenewalType (string) -- Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term.
          • ReservedSlots (integer) -- Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. When you increase this number, you extend your existing commitment with a new 12-month commitment for a larger number of RTS. The new commitment begins when you purchase the additional capacity. You can't decrease the number of RTS in your reserved queue.
          • Status (string) -- Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
        • Status (string) -- Queues can be ACTIVE or PAUSED. If you pause a queue, the service won't begin processing jobs in that queue. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
        • SubmittedJobsCount (integer) -- The estimated number of jobs with a SUBMITTED status.
        • Type (string) -- Specifies whether this on-demand queue is system or custom. System queues are built in. You can't modify or delete system queues. You can create and modify custom queues.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
list_tags_for_resource(**kwargs)

Retrieve the tags for a MediaConvert resource.

See also: AWS API Documentation

Request Syntax

response = client.list_tags_for_resource(
    Arn='string'
)
Parameters
Arn (string) -- [REQUIRED] The Amazon Resource Name (ARN) of the resource that you want to list tags for. To get the ARN, send a GET request with the resource name.
Return type
dict
Returns
Response Syntax
{
    'ResourceTags': {
        'Arn': 'string',
        'Tags': {
            'string': 'string'
        }
    }
}

Response Structure

  • (dict) --
    • ResourceTags (dict) -- The Amazon Resource Name (ARN) and tags for an AWS Elemental MediaConvert resource.
      • Arn (string) -- The Amazon Resource Name (ARN) of the resource.
      • Tags (dict) -- The tags for the resource.
        • (string) --
          • (string) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
tag_resource(**kwargs)

Add tags to a MediaConvert queue, preset, or job template. For information about tagging, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/tagging-resources.html

See also: AWS API Documentation

Request Syntax

response = client.tag_resource(
    Arn='string',
    Tags={
        'string': 'string'
    }
)
Parameters
  • Arn (string) -- [REQUIRED] The Amazon Resource Name (ARN) of the resource that you want to tag. To get the ARN, send a GET request with the resource name.
  • Tags (dict) --

    [REQUIRED] The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key.

    • (string) --
      • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
untag_resource(**kwargs)

Remove tags from a MediaConvert queue, preset, or job template. For information about tagging, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/tagging-resources.html

See also: AWS API Documentation

Request Syntax

response = client.untag_resource(
    Arn='string',
    TagKeys=[
        'string',
    ]
)
Parameters
  • Arn (string) -- [REQUIRED] The Amazon Resource Name (ARN) of the resource that you want to remove tags from. To get the ARN, send a GET request with the resource name.
  • TagKeys (list) --

    The keys of the tags that you want to remove from the resource.

    • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
update_job_template(**kwargs)

Modify one of your existing job templates.

See also: AWS API Documentation

Request Syntax

response = client.update_job_template(
    AccelerationSettings={
        'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
    },
    Category='string',
    Description='string',
    HopDestinations=[
        {
            'Priority': 123,
            'Queue': 'string',
            'WaitMinutes': 123
        },
    ],
    Name='string',
    Priority=123,
    Queue='string',
    Settings={
        'AdAvailOffset': 123,
        'AvailBlanking': {
            'AvailBlankingImage': 'string'
        },
        'Esam': {
            'ManifestConfirmConditionNotification': {
                'MccXml': 'string'
            },
            'ResponseSignalPreroll': 123,
            'SignalProcessingNotification': {
                'SccXml': 'string'
            }
        },
        'Inputs': [
            {
                'AudioSelectorGroups': {
                    'string': {
                        'AudioSelectorNames': [
                            'string',
                        ]
                    }
                },
                'AudioSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                        'ExternalAudioFileInput': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'Offset': 123,
                        'Pids': [
                            123,
                        ],
                        'ProgramSelection': 123,
                        'RemixSettings': {
                            'ChannelMapping': {
                                'OutputChannels': [
                                    {
                                        'InputChannels': [
                                            123,
                                        ],
                                        'InputChannelsFineTune': [
                                            123.0,
                                        ]
                                    },
                                ]
                            },
                            'ChannelsIn': 123,
                            'ChannelsOut': 123
                        },
                        'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                        'Tracks': [
                            123,
                        ]
                    }
                },
                'CaptionSelectors': {
                    'string': {
                        'CustomLanguageCode': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'SourceSettings': {
                            'AncillarySourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'SourceAncillaryChannelNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'DvbSubSourceSettings': {
                                'Pid': 123
                            },
                            'EmbeddedSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Source608ChannelNumber': 123,
                                'Source608TrackNumber': 123,
                                'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                            },
                            'FileSourceSettings': {
                                'Convert608To708': 'UPCONVERT'|'DISABLED',
                                'Framerate': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123
                                },
                                'SourceFile': 'string',
                                'TimeDelta': 123
                            },
                            'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                            'TeletextSourceSettings': {
                                'PageNumber': 'string'
                            },
                            'TrackSourceSettings': {
                                'TrackNumber': 123
                            }
                        }
                    }
                },
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DeblockFilter': 'ENABLED'|'DISABLED',
                'DenoiseFilter': 'ENABLED'|'DISABLED',
                'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                'FilterStrength': 123,
                'ImageInserter': {
                    'InsertableImages': [
                        {
                            'Duration': 123,
                            'FadeIn': 123,
                            'FadeOut': 123,
                            'Height': 123,
                            'ImageInserterInput': 'string',
                            'ImageX': 123,
                            'ImageY': 123,
                            'Layer': 123,
                            'Opacity': 123,
                            'StartTime': 'string',
                            'Width': 123
                        },
                    ]
                },
                'InputClippings': [
                    {
                        'EndTimecode': 'string',
                        'StartTimecode': 'string'
                    },
                ],
                'InputScanType': 'AUTO'|'PSF',
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'ProgramNumber': 123,
                'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'TimecodeStart': 'string',
                'VideoSelector': {
                    'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                    'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                    'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                    'Hdr10Metadata': {
                        'BluePrimaryX': 123,
                        'BluePrimaryY': 123,
                        'GreenPrimaryX': 123,
                        'GreenPrimaryY': 123,
                        'MaxContentLightLevel': 123,
                        'MaxFrameAverageLightLevel': 123,
                        'MaxLuminance': 123,
                        'MinLuminance': 123,
                        'RedPrimaryX': 123,
                        'RedPrimaryY': 123,
                        'WhitePointX': 123,
                        'WhitePointY': 123
                    },
                    'Pid': 123,
                    'ProgramNumber': 123,
                    'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                }
            },
        ],
        'MotionImageInserter': {
            'Framerate': {
                'FramerateDenominator': 123,
                'FramerateNumerator': 123
            },
            'Input': 'string',
            'InsertionMode': 'MOV'|'PNG',
            'Offset': {
                'ImageX': 123,
                'ImageY': 123
            },
            'Playback': 'ONCE'|'REPEAT',
            'StartTime': 'string'
        },
        'NielsenConfiguration': {
            'BreakoutCode': 123,
            'DistributorId': 'string'
        },
        'NielsenNonLinearWatermark': {
            'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
            'AdiFilename': 'string',
            'AssetId': 'string',
            'AssetName': 'string',
            'CbetSourceId': 'string',
            'EpisodeId': 'string',
            'MetadataDestination': 'string',
            'SourceId': 123,
            'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
            'TicServerUrl': 'string',
            'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
        },
        'OutputGroups': [
            {
                'AutomatedEncodingSettings': {
                    'AbrSettings': {
                        'MaxAbrBitrate': 123,
                        'MaxRenditions': 123,
                        'MinAbrBitrate': 123
                    }
                },
                'CustomName': 'string',
                'Name': 'string',
                'OutputGroupSettings': {
                    'CmafGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'BaseUrl': 'string',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'DashSignaledSystemIds': [
                                    'string',
                                ],
                                'HlsSignaledSystemIds': [
                                    'string',
                                ],
                                'ResourceId': 'string',
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'FragmentLength': 123,
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'WriteDashManifest': 'DISABLED'|'ENABLED',
                        'WriteHlsManifest': 'DISABLED'|'ENABLED',
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'DashIsoGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                        'BaseUrl': 'string',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                        'MinBufferTime': 123,
                        'MinFinalSegmentLength': 123.0,
                        'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                        'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                    },
                    'FileGroupSettings': {
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        }
                    },
                    'HlsGroupSettings': {
                        'AdMarkers': [
                            'ELEMENTAL'|'ELEMENTAL_SCTE35',
                        ],
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                        'BaseUrl': 'string',
                        'CaptionLanguageMappings': [
                            {
                                'CaptionChannel': 123,
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                        'ClientCache': 'DISABLED'|'ENABLED',
                        'CodecSpecification': 'RFC_6381'|'RFC_4281',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                        'Encryption': {
                            'ConstantInitializationVector': 'string',
                            'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                            'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                            'OfflineEncrypted': 'ENABLED'|'DISABLED',
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            },
                            'StaticKeyProvider': {
                                'KeyFormat': 'string',
                                'KeyFormatVersions': 'string',
                                'StaticKeyValue': 'string',
                                'Url': 'string'
                            },
                            'Type': 'SPEKE'|'STATIC_KEY'
                        },
                        'ManifestCompression': 'GZIP'|'NONE',
                        'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                        'MinFinalSegmentLength': 123.0,
                        'MinSegmentLength': 123,
                        'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                        'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                        'ProgramDateTimePeriod': 123,
                        'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                        'SegmentLength': 123,
                        'SegmentsPerSubdirectory': 123,
                        'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                        'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                        'TimedMetadataId3Period': 123,
                        'TimestampDeltaMilliseconds': 123
                    },
                    'MsSmoothGroupSettings': {
                        'AdditionalManifests': [
                            {
                                'ManifestNameModifier': 'string',
                                'SelectedOutputs': [
                                    'string',
                                ]
                            },
                        ],
                        'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                        'Destination': 'string',
                        'DestinationSettings': {
                            'S3Settings': {
                                'AccessControl': {
                                    'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                },
                                'Encryption': {
                                    'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                    'KmsKeyArn': 'string'
                                }
                            }
                        },
                        'Encryption': {
                            'SpekeKeyProvider': {
                                'CertificateArn': 'string',
                                'ResourceId': 'string',
                                'SystemIds': [
                                    'string',
                                ],
                                'Url': 'string'
                            }
                        },
                        'FragmentLength': 123,
                        'ManifestEncoding': 'UTF8'|'UTF16'
                    },
                    'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                },
                'Outputs': [
                    {
                        'AudioDescriptions': [
                            {
                                'AudioChannelTaggingSettings': {
                                    'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                },
                                'AudioNormalizationSettings': {
                                    'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                    'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                    'CorrectionGateLevel': 123,
                                    'LoudnessLogging': 'LOG'|'DONT_LOG',
                                    'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                    'TargetLkfs': 123.0
                                },
                                'AudioSourceName': 'string',
                                'AudioType': 123,
                                'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'CodecSettings': {
                                    'AacSettings': {
                                        'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                        'Bitrate': 123,
                                        'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                        'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                        'RateControlMode': 'CBR'|'VBR',
                                        'RawFormat': 'LATM_LOAS'|'NONE',
                                        'SampleRate': 123,
                                        'Specification': 'MPEG2'|'MPEG4',
                                        'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                    },
                                    'Ac3Settings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                        'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'SampleRate': 123
                                    },
                                    'AiffSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                    'Eac3AtmosSettings': {
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN',
                                        'CodingMode': 'CODING_MODE_9_1_6',
                                        'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'SampleRate': 123,
                                        'SpeechThreshold': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Eac3Settings': {
                                        'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                        'Bitrate': 123,
                                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                        'DcFilter': 'ENABLED'|'DISABLED',
                                        'Dialnorm': 123,
                                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                        'LfeControl': 'LFE'|'NO_LFE',
                                        'LfeFilter': 'ENABLED'|'DISABLED',
                                        'LoRoCenterMixLevel': 123.0,
                                        'LoRoSurroundMixLevel': 123.0,
                                        'LtRtCenterMixLevel': 123.0,
                                        'LtRtSurroundMixLevel': 123.0,
                                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                        'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                        'SampleRate': 123,
                                        'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                        'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                    },
                                    'Mp2Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'Mp3Settings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'RateControlMode': 'CBR'|'VBR',
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'OpusSettings': {
                                        'Bitrate': 123,
                                        'Channels': 123,
                                        'SampleRate': 123
                                    },
                                    'VorbisSettings': {
                                        'Channels': 123,
                                        'SampleRate': 123,
                                        'VbrQuality': 123
                                    },
                                    'WavSettings': {
                                        'BitDepth': 123,
                                        'Channels': 123,
                                        'Format': 'RIFF'|'RF64',
                                        'SampleRate': 123
                                    }
                                },
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'StreamName': 'string'
                            },
                        ],
                        'CaptionDescriptions': [
                            {
                                'CaptionSelectorName': 'string',
                                'CustomLanguageCode': 'string',
                                'DestinationSettings': {
                                    'BurninDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                    'DvbSubDestinationSettings': {
                                        'Alignment': 'CENTERED'|'LEFT',
                                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                        'BackgroundOpacity': 123,
                                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'FontOpacity': 123,
                                        'FontResolution': 123,
                                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                        'FontSize': 123,
                                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                        'OutlineSize': 123,
                                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                        'ShadowOpacity': 123,
                                        'ShadowXOffset': 123,
                                        'ShadowYOffset': 123,
                                        'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                        'XPosition': 123,
                                        'YPosition': 123
                                    },
                                    'EmbeddedDestinationSettings': {
                                        'Destination608ChannelNumber': 123,
                                        'Destination708ServiceNumber': 123
                                    },
                                    'ImscDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'SccDestinationSettings': {
                                        'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                    },
                                    'TeletextDestinationSettings': {
                                        'PageNumber': 'string',
                                        'PageTypes': [
                                            'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                        ]
                                    },
                                    'TtmlDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    },
                                    'WebvttDestinationSettings': {
                                        'StylePassthrough': 'ENABLED'|'DISABLED'
                                    }
                                },
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'LanguageDescription': 'string'
                            },
                        ],
                        'ContainerSettings': {
                            'CmfcSettings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioGroupId': 'string',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                            'F4vSettings': {
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                            },
                            'M2tsSettings': {
                                'AudioBufferModel': 'DVB'|'ATSC',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'Bitrate': 123,
                                'BufferModel': 'MULTIPLEX'|'NONE',
                                'DvbNitSettings': {
                                    'NetworkId': 123,
                                    'NetworkName': 'string',
                                    'NitInterval': 123
                                },
                                'DvbSdtSettings': {
                                    'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                    'SdtInterval': 123,
                                    'ServiceName': 'string',
                                    'ServiceProviderName': 'string'
                                },
                                'DvbSubPids': [
                                    123,
                                ],
                                'DvbTdtSettings': {
                                    'TdtInterval': 123
                                },
                                'DvbTeletextPid': 123,
                                'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                'FragmentTime': 123.0,
                                'MaxPcrInterval': 123,
                                'MinEbpInterval': 123,
                                'NielsenId3': 'INSERT'|'NONE',
                                'NullPacketBitrate': 123.0,
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'RateMode': 'VBR'|'CBR',
                                'Scte35Esam': {
                                    'Scte35EsamPid': 123
                                },
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                'SegmentationTime': 123.0,
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'M3u8Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'AudioFramesPerPes': 123,
                                'AudioPids': [
                                    123,
                                ],
                                'NielsenId3': 'INSERT'|'NONE',
                                'PatInterval': 123,
                                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                'PcrPid': 123,
                                'PmtInterval': 123,
                                'PmtPid': 123,
                                'PrivateMetadataPid': 123,
                                'ProgramNumber': 123,
                                'Scte35Pid': 123,
                                'Scte35Source': 'PASSTHROUGH'|'NONE',
                                'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                'TimedMetadataPid': 123,
                                'TransportStreamId': 123,
                                'VideoPid': 123
                            },
                            'MovSettings': {
                                'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                'PaddingControl': 'OMNEON'|'NONE',
                                'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                            },
                            'Mp4Settings': {
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                'CttsVersion': 123,
                                'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                'Mp4MajorBrand': 'string'
                            },
                            'MpdSettings': {
                                'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                'Scte35Esam': 'INSERT'|'NONE',
                                'Scte35Source': 'PASSTHROUGH'|'NONE'
                            },
                            'MxfSettings': {
                                'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                'Profile': 'D_10'|'XDCAM'|'OP1A'
                            }
                        },
                        'Extension': 'string',
                        'NameModifier': 'string',
                        'OutputSettings': {
                            'HlsSettings': {
                                'AudioGroupId': 'string',
                                'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                'AudioRenditionSets': 'string',
                                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                'SegmentModifier': 'string'
                            }
                        },
                        'Preset': 'string',
                        'VideoDescription': {
                            'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                            'AntiAlias': 'DISABLED'|'ENABLED',
                            'CodecSettings': {
                                'Av1Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'MaxBitrate': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'QvbrSettings': {
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'QVBR',
                                    'Slices': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'AvcIntraSettings': {
                                    'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                    'AvcIntraUhdSettings': {
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                    },
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                'FrameCaptureSettings': {
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'MaxCaptures': 123,
                                    'Quality': 123
                                },
                                'H264Settings': {
                                    'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                    'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'EntropyEncoding': 'CABAC'|'CAVLC',
                                    'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'RepeatPps': 'DISABLED'|'ENABLED',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'RP2027',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                },
                                'H265Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                    'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                    'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopBReference': 'DISABLED'|'ENABLED',
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'NumberReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                    'QvbrSettings': {
                                        'MaxAverageBitrate': 123,
                                        'QvbrQualityLevel': 123,
                                        'QvbrQualityLevelFineTune': 123.0
                                    },
                                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                    'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                    'Slices': 123,
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'TemporalIds': 'DISABLED'|'ENABLED',
                                    'Tiles': 'DISABLED'|'ENABLED',
                                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                    'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                },
                                'Mpeg2Settings': {
                                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                    'Bitrate': 123,
                                    'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                    'CodecProfile': 'MAIN'|'PROFILE_422',
                                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopClosedCadence': 123,
                                    'GopSize': 123.0,
                                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                                    'HrdBufferInitialFillPercentage': 123,
                                    'HrdBufferSize': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                    'MaxBitrate': 123,
                                    'MinIInterval': 123,
                                    'NumberBFramesBetweenReferenceFrames': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                    'RateControlMode': 'VBR'|'CBR',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Softness': 123,
                                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                    'Syntax': 'DEFAULT'|'D_10',
                                    'Telecine': 'NONE'|'SOFT'|'HARD',
                                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                },
                                'ProresSettings': {
                                    'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD'
                                },
                                'Vc3Settings': {
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                    'SlowPal': 'DISABLED'|'ENABLED',
                                    'Telecine': 'NONE'|'HARD',
                                    'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                },
                                'Vp8Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                },
                                'Vp9Settings': {
                                    'Bitrate': 123,
                                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                    'FramerateDenominator': 123,
                                    'FramerateNumerator': 123,
                                    'GopSize': 123.0,
                                    'HrdBufferSize': 123,
                                    'MaxBitrate': 123,
                                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                    'ParDenominator': 123,
                                    'ParNumerator': 123,
                                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                    'RateControlMode': 'VBR'
                                }
                            },
                            'ColorMetadata': 'IGNORE'|'INSERT',
                            'Crop': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'DropFrameTimecode': 'DISABLED'|'ENABLED',
                            'FixedAfd': 123,
                            'Height': 123,
                            'Position': {
                                'Height': 123,
                                'Width': 123,
                                'X': 123,
                                'Y': 123
                            },
                            'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                            'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                            'Sharpness': 123,
                            'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                            'VideoPreprocessors': {
                                'ColorCorrector': {
                                    'Brightness': 123,
                                    'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                    'Contrast': 123,
                                    'Hdr10Metadata': {
                                        'BluePrimaryX': 123,
                                        'BluePrimaryY': 123,
                                        'GreenPrimaryX': 123,
                                        'GreenPrimaryY': 123,
                                        'MaxContentLightLevel': 123,
                                        'MaxFrameAverageLightLevel': 123,
                                        'MaxLuminance': 123,
                                        'MinLuminance': 123,
                                        'RedPrimaryX': 123,
                                        'RedPrimaryY': 123,
                                        'WhitePointX': 123,
                                        'WhitePointY': 123
                                    },
                                    'Hue': 123,
                                    'Saturation': 123
                                },
                                'Deinterlacer': {
                                    'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                    'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                    'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                },
                                'DolbyVision': {
                                    'L6Metadata': {
                                        'MaxCll': 123,
                                        'MaxFall': 123
                                    },
                                    'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                    'Profile': 'PROFILE_5'
                                },
                                'ImageInserter': {
                                    'InsertableImages': [
                                        {
                                            'Duration': 123,
                                            'FadeIn': 123,
                                            'FadeOut': 123,
                                            'Height': 123,
                                            'ImageInserterInput': 'string',
                                            'ImageX': 123,
                                            'ImageY': 123,
                                            'Layer': 123,
                                            'Opacity': 123,
                                            'StartTime': 'string',
                                            'Width': 123
                                        },
                                    ]
                                },
                                'NoiseReducer': {
                                    'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                    'FilterSettings': {
                                        'Strength': 123
                                    },
                                    'SpatialFilterSettings': {
                                        'PostFilterSharpenStrength': 123,
                                        'Speed': 123,
                                        'Strength': 123
                                    },
                                    'TemporalFilterSettings': {
                                        'AggressiveMode': 123,
                                        'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                        'Speed': 123,
                                        'Strength': 123
                                    }
                                },
                                'PartnerWatermarking': {
                                    'NexguardFileMarkerSettings': {
                                        'License': 'string',
                                        'Payload': 123,
                                        'Preset': 'string',
                                        'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                    }
                                },
                                'TimecodeBurnin': {
                                    'FontSize': 123,
                                    'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                    'Prefix': 'string'
                                }
                            },
                            'Width': 123
                        }
                    },
                ]
            },
        ],
        'TimecodeConfig': {
            'Anchor': 'string',
            'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
            'Start': 'string',
            'TimestampOffset': 'string'
        },
        'TimedMetadataInsertion': {
            'Id3Insertions': [
                {
                    'Id3': 'string',
                    'Timecode': 'string'
                },
            ]
        }
    },
    StatusUpdateInterval='SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600'
)
Parameters
  • AccelerationSettings (dict) --

    Accelerated transcoding can significantly speed up jobs with long, visually complex content. Outputs that use this feature incur pro-tier pricing. For information about feature limitations, see the AWS Elemental MediaConvert User Guide.

    • Mode (string) -- [REQUIRED] Specify the conditions when the service will run your job with accelerated transcoding.
  • Category (string) -- The new category for the job template, if you are changing it.
  • Description (string) -- The new description for the job template, if you are changing it.
  • HopDestinations (list) --

    Optional list of hop destinations.

    • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
      • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
      • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
      • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
  • Name (string) -- [REQUIRED] The name of the job template you are modifying
  • Priority (integer) -- Specify the relative priority for this job. In any given queue, the service begins processing the job with the highest value first. When more than one job has the same priority, the service begins processing the job that you submitted first. If you don't specify a priority, the service uses the default value 0.
  • Queue (string) -- The new queue for the job template, if you are changing it.
  • Settings (dict) --

    JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.

    • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
    • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
      • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
    • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
        • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
      • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
      • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
        • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
    • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
      • (dict) -- Specified video input in a template.
        • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
          • (string) --
            • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                • (string) --
        • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
          • (string) --
            • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
              • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
              • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
              • LanguageCode (string) -- Selects a specific language code from within an audio source.
              • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
              • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                • (integer) --
              • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
              • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                  • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                    • (dict) -- OutputChannel mapping settings.
                      • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                        • (integer) --
                      • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                        • (float) --
                • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • SelectorType (string) -- Specifies the type of the audio selector.
              • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                • (integer) --
        • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
          • (string) --
            • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
              • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                  • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                  • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                  • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                  • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                  • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                    • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                    • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                  • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                  • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                  • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                  • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
        • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
        • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
        • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
        • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
        • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
          • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
            • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
              • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
              • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
              • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
              • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
              • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
              • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
              • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
              • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
              • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
              • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
              • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
        • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
          • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
            • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
            • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
        • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
        • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
          • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
          • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
          • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
          • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
        • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
        • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
        • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
        • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
          • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
          • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
          • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
          • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
            • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
            • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
            • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
          • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
          • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
          • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
    • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
      • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
        • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
        • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
      • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
      • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
      • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
        • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
        • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
      • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
      • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
    • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
      • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
      • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
    • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
      • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
      • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
      • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
      • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
      • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
      • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
      • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
      • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
      • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
      • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
      • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
    • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
      • (dict) -- Group of outputs
        • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
          • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
            • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
            • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
            • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
        • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
        • Name (string) -- Name of the output group
        • OutputGroupSettings (dict) -- Output Group settings, including type
          • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
              • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
              • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
              • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                  • (string) --
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
            • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
            • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
          • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
            • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- DRM settings.
              • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
            • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
            • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
            • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
            • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
            • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
          • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
          • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
            • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
              • (string) --
            • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
            • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
            • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
              • (dict) -- Caption Language Mapping
                • CaptionChannel (integer) -- Caption channel.
                • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                • LanguageDescription (string) -- Caption language description.
            • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
            • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
            • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
            • Encryption (dict) -- DRM settings.
              • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
              • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
              • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
              • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
              • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
              • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
            • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
            • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
            • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
            • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
            • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
            • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
            • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
            • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
            • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
            • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
            • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
            • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
            • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
            • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
          • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
            • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
              • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                  • (string) --
            • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
            • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
            • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
              • S3Settings (dict) -- Settings associated with S3 destination
                • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                  • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                  • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                  • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
            • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
              • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                  • (string) --
                • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
            • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
            • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
          • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
        • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
          • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
            • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
              • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                  • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                  • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                  • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                  • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                  • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                  • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                  • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                  • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                    • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                    • CodecProfile (string) -- AAC Profile.
                    • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                    • RateControlMode (string) -- Rate Control Mode.
                    • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                    • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                    • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                    • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                  • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                  • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                    • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                    • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                    • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                    • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                    • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                  • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                    • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                    • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                    • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                    • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                    • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                    • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                    • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                    • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                    • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                    • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                    • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                    • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                    • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                    • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                    • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                    • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                    • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                    • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                    • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                  • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Sample rate in hz.
                  • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                    • Bitrate (integer) -- Specify the average bitrate in bits per second.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                    • SampleRate (integer) -- Sample rate in hz.
                    • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                  • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                    • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                    • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                  • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                    • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                    • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                    • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                  • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                    • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                    • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                    • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                    • SampleRate (integer) -- Sample rate in Hz.
                • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                • RemixSettings (dict) -- Advanced audio remixing settings.
                  • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                    • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                      • (dict) -- OutputChannel mapping settings.
                        • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                          • (integer) --
                        • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                          • (float) --
                  • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
              • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                  • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                  • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                    • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                    • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                    • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                    • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                    • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                    • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                    • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                    • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                    • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                    • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                    • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                    • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                    • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                    • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                    • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                  • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                    • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                  • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                    • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                  • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                    • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                    • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                      • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                  • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                    • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                  • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                    • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
            • ContainerSettings (dict) -- Container specific settings.
              • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
              • F4vSettings (dict) -- Settings for F4v container
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
              • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                  • (integer) --
                • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                  • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                  • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                  • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                  • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                  • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                  • (integer) --
                • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                  • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                  • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
              • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                  • (integer) --
                • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
              • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
              • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
              • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
              • MxfSettings (dict) -- These settings relate to your MXF output container.
                • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
            • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
            • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
            • OutputSettings (dict) -- Specific settings for this type of output.
              • HlsSettings (dict) -- Settings for HLS output groups
                • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
            • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
            • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
              • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
              • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
              • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                  • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                  • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                  • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                    • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                  • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                  • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                  • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                  • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                  • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                  • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                  • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                  • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                • H265Settings (dict) -- Settings for H265 codec
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- H.265 Level.
                  • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                    • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                    • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                    • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                  • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                  • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                  • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                  • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                  • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                  • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                  • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                  • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                  • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                  • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                  • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                  • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                  • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                  • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                  • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                  • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                  • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                  • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                  • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                  • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                  • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                  • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                  • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                  • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                  • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                  • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                  • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                  • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                  • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                  • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                  • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                  • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                  • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                  • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
              • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
              • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
              • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
              • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
              • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
              • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
              • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                  • Brightness (integer) -- Brightness level.
                  • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                  • Contrast (integer) -- Contrast level.
                  • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                    • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                    • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                    • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                    • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                    • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • Hue (integer) -- Hue in degrees.
                  • Saturation (integer) -- Saturation level.
                • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                  • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                  • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                  • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                  • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                    • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                    • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                  • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                  • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                    • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                      • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                      • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                      • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                      • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                      • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                      • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                      • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                      • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                      • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                      • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                      • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                  • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                  • FilterSettings (dict) -- Settings for a noise reducer filter
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                    • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                    • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                    • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                  • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                    • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                    • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                    • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                    • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                  • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                    • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                    • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                    • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                  • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                  • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                  • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
              • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
    • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
      • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
      • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
      • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
      • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
    • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
      • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
        • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
          • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
          • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
  • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
Return type

dict

Returns

Response Syntax

{
    'JobTemplate': {
        'AccelerationSettings': {
            'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
        },
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'HopDestinations': [
            {
                'Priority': 123,
                'Queue': 'string',
                'WaitMinutes': 123
            },
        ],
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Priority': 123,
        'Queue': 'string',
        'Settings': {
            'AdAvailOffset': 123,
            'AvailBlanking': {
                'AvailBlankingImage': 'string'
            },
            'Esam': {
                'ManifestConfirmConditionNotification': {
                    'MccXml': 'string'
                },
                'ResponseSignalPreroll': 123,
                'SignalProcessingNotification': {
                    'SccXml': 'string'
                }
            },
            'Inputs': [
                {
                    'AudioSelectorGroups': {
                        'string': {
                            'AudioSelectorNames': [
                                'string',
                            ]
                        }
                    },
                    'AudioSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                            'ExternalAudioFileInput': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'Offset': 123,
                            'Pids': [
                                123,
                            ],
                            'ProgramSelection': 123,
                            'RemixSettings': {
                                'ChannelMapping': {
                                    'OutputChannels': [
                                        {
                                            'InputChannels': [
                                                123,
                                            ],
                                            'InputChannelsFineTune': [
                                                123.0,
                                            ]
                                        },
                                    ]
                                },
                                'ChannelsIn': 123,
                                'ChannelsOut': 123
                            },
                            'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                            'Tracks': [
                                123,
                            ]
                        }
                    },
                    'CaptionSelectors': {
                        'string': {
                            'CustomLanguageCode': 'string',
                            'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                            'SourceSettings': {
                                'AncillarySourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'SourceAncillaryChannelNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'DvbSubSourceSettings': {
                                    'Pid': 123
                                },
                                'EmbeddedSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Source608ChannelNumber': 123,
                                    'Source608TrackNumber': 123,
                                    'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                },
                                'FileSourceSettings': {
                                    'Convert608To708': 'UPCONVERT'|'DISABLED',
                                    'Framerate': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123
                                    },
                                    'SourceFile': 'string',
                                    'TimeDelta': 123
                                },
                                'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                'TeletextSourceSettings': {
                                    'PageNumber': 'string'
                                },
                                'TrackSourceSettings': {
                                    'TrackNumber': 123
                                }
                            }
                        }
                    },
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DeblockFilter': 'ENABLED'|'DISABLED',
                    'DenoiseFilter': 'ENABLED'|'DISABLED',
                    'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                    'FilterStrength': 123,
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'InputClippings': [
                        {
                            'EndTimecode': 'string',
                            'StartTimecode': 'string'
                        },
                    ],
                    'InputScanType': 'AUTO'|'PSF',
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'ProgramNumber': 123,
                    'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                    'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'TimecodeStart': 'string',
                    'VideoSelector': {
                        'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                        'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                        'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Pid': 123,
                        'ProgramNumber': 123,
                        'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                    }
                },
            ],
            'MotionImageInserter': {
                'Framerate': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123
                },
                'Input': 'string',
                'InsertionMode': 'MOV'|'PNG',
                'Offset': {
                    'ImageX': 123,
                    'ImageY': 123
                },
                'Playback': 'ONCE'|'REPEAT',
                'StartTime': 'string'
            },
            'NielsenConfiguration': {
                'BreakoutCode': 123,
                'DistributorId': 'string'
            },
            'NielsenNonLinearWatermark': {
                'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                'AdiFilename': 'string',
                'AssetId': 'string',
                'AssetName': 'string',
                'CbetSourceId': 'string',
                'EpisodeId': 'string',
                'MetadataDestination': 'string',
                'SourceId': 123,
                'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                'TicServerUrl': 'string',
                'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
            },
            'OutputGroups': [
                {
                    'AutomatedEncodingSettings': {
                        'AbrSettings': {
                            'MaxAbrBitrate': 123,
                            'MaxRenditions': 123,
                            'MinAbrBitrate': 123
                        }
                    },
                    'CustomName': 'string',
                    'Name': 'string',
                    'OutputGroupSettings': {
                        'CmafGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'BaseUrl': 'string',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'DashSignaledSystemIds': [
                                        'string',
                                    ],
                                    'HlsSignaledSystemIds': [
                                        'string',
                                    ],
                                    'ResourceId': 'string',
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'FragmentLength': 123,
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'WriteDashManifest': 'DISABLED'|'ENABLED',
                            'WriteHlsManifest': 'DISABLED'|'ENABLED',
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'DashIsoGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                            'BaseUrl': 'string',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                            'MinBufferTime': 123,
                            'MinFinalSegmentLength': 123.0,
                            'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                            'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                        },
                        'FileGroupSettings': {
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            }
                        },
                        'HlsGroupSettings': {
                            'AdMarkers': [
                                'ELEMENTAL'|'ELEMENTAL_SCTE35',
                            ],
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                            'BaseUrl': 'string',
                            'CaptionLanguageMappings': [
                                {
                                    'CaptionChannel': 123,
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                            'ClientCache': 'DISABLED'|'ENABLED',
                            'CodecSpecification': 'RFC_6381'|'RFC_4281',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                            'Encryption': {
                                'ConstantInitializationVector': 'string',
                                'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                },
                                'StaticKeyProvider': {
                                    'KeyFormat': 'string',
                                    'KeyFormatVersions': 'string',
                                    'StaticKeyValue': 'string',
                                    'Url': 'string'
                                },
                                'Type': 'SPEKE'|'STATIC_KEY'
                            },
                            'ManifestCompression': 'GZIP'|'NONE',
                            'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                            'MinFinalSegmentLength': 123.0,
                            'MinSegmentLength': 123,
                            'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                            'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                            'ProgramDateTimePeriod': 123,
                            'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                            'SegmentLength': 123,
                            'SegmentsPerSubdirectory': 123,
                            'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                            'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                            'TimedMetadataId3Period': 123,
                            'TimestampDeltaMilliseconds': 123
                        },
                        'MsSmoothGroupSettings': {
                            'AdditionalManifests': [
                                {
                                    'ManifestNameModifier': 'string',
                                    'SelectedOutputs': [
                                        'string',
                                    ]
                                },
                            ],
                            'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                            'Destination': 'string',
                            'DestinationSettings': {
                                'S3Settings': {
                                    'AccessControl': {
                                        'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                    },
                                    'Encryption': {
                                        'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                        'KmsKeyArn': 'string'
                                    }
                                }
                            },
                            'Encryption': {
                                'SpekeKeyProvider': {
                                    'CertificateArn': 'string',
                                    'ResourceId': 'string',
                                    'SystemIds': [
                                        'string',
                                    ],
                                    'Url': 'string'
                                }
                            },
                            'FragmentLength': 123,
                            'ManifestEncoding': 'UTF8'|'UTF16'
                        },
                        'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                    },
                    'Outputs': [
                        {
                            'AudioDescriptions': [
                                {
                                    'AudioChannelTaggingSettings': {
                                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                    },
                                    'AudioNormalizationSettings': {
                                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                        'CorrectionGateLevel': 123,
                                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                        'TargetLkfs': 123.0
                                    },
                                    'AudioSourceName': 'string',
                                    'AudioType': 123,
                                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'CodecSettings': {
                                        'AacSettings': {
                                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                            'Bitrate': 123,
                                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                            'RateControlMode': 'CBR'|'VBR',
                                            'RawFormat': 'LATM_LOAS'|'NONE',
                                            'SampleRate': 123,
                                            'Specification': 'MPEG2'|'MPEG4',
                                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                        },
                                        'Ac3Settings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'SampleRate': 123
                                        },
                                        'AiffSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                        'Eac3AtmosSettings': {
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN',
                                            'CodingMode': 'CODING_MODE_9_1_6',
                                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'SampleRate': 123,
                                            'SpeechThreshold': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Eac3Settings': {
                                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                            'Bitrate': 123,
                                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                            'DcFilter': 'ENABLED'|'DISABLED',
                                            'Dialnorm': 123,
                                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                            'LfeControl': 'LFE'|'NO_LFE',
                                            'LfeFilter': 'ENABLED'|'DISABLED',
                                            'LoRoCenterMixLevel': 123.0,
                                            'LoRoSurroundMixLevel': 123.0,
                                            'LtRtCenterMixLevel': 123.0,
                                            'LtRtSurroundMixLevel': 123.0,
                                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                            'SampleRate': 123,
                                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                        },
                                        'Mp2Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'Mp3Settings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'RateControlMode': 'CBR'|'VBR',
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'OpusSettings': {
                                            'Bitrate': 123,
                                            'Channels': 123,
                                            'SampleRate': 123
                                        },
                                        'VorbisSettings': {
                                            'Channels': 123,
                                            'SampleRate': 123,
                                            'VbrQuality': 123
                                        },
                                        'WavSettings': {
                                            'BitDepth': 123,
                                            'Channels': 123,
                                            'Format': 'RIFF'|'RF64',
                                            'SampleRate': 123
                                        }
                                    },
                                    'CustomLanguageCode': 'string',
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                    'RemixSettings': {
                                        'ChannelMapping': {
                                            'OutputChannels': [
                                                {
                                                    'InputChannels': [
                                                        123,
                                                    ],
                                                    'InputChannelsFineTune': [
                                                        123.0,
                                                    ]
                                                },
                                            ]
                                        },
                                        'ChannelsIn': 123,
                                        'ChannelsOut': 123
                                    },
                                    'StreamName': 'string'
                                },
                            ],
                            'CaptionDescriptions': [
                                {
                                    'CaptionSelectorName': 'string',
                                    'CustomLanguageCode': 'string',
                                    'DestinationSettings': {
                                        'BurninDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                        'DvbSubDestinationSettings': {
                                            'Alignment': 'CENTERED'|'LEFT',
                                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                            'BackgroundOpacity': 123,
                                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'FontOpacity': 123,
                                            'FontResolution': 123,
                                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                            'FontSize': 123,
                                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                            'OutlineSize': 123,
                                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                            'ShadowOpacity': 123,
                                            'ShadowXOffset': 123,
                                            'ShadowYOffset': 123,
                                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                            'XPosition': 123,
                                            'YPosition': 123
                                        },
                                        'EmbeddedDestinationSettings': {
                                            'Destination608ChannelNumber': 123,
                                            'Destination708ServiceNumber': 123
                                        },
                                        'ImscDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'SccDestinationSettings': {
                                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                        },
                                        'TeletextDestinationSettings': {
                                            'PageNumber': 'string',
                                            'PageTypes': [
                                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                            ]
                                        },
                                        'TtmlDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        },
                                        'WebvttDestinationSettings': {
                                            'StylePassthrough': 'ENABLED'|'DISABLED'
                                        }
                                    },
                                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                    'LanguageDescription': 'string'
                                },
                            ],
                            'ContainerSettings': {
                                'CmfcSettings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioGroupId': 'string',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                'F4vSettings': {
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                },
                                'M2tsSettings': {
                                    'AudioBufferModel': 'DVB'|'ATSC',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'Bitrate': 123,
                                    'BufferModel': 'MULTIPLEX'|'NONE',
                                    'DvbNitSettings': {
                                        'NetworkId': 123,
                                        'NetworkName': 'string',
                                        'NitInterval': 123
                                    },
                                    'DvbSdtSettings': {
                                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                        'SdtInterval': 123,
                                        'ServiceName': 'string',
                                        'ServiceProviderName': 'string'
                                    },
                                    'DvbSubPids': [
                                        123,
                                    ],
                                    'DvbTdtSettings': {
                                        'TdtInterval': 123
                                    },
                                    'DvbTeletextPid': 123,
                                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                    'FragmentTime': 123.0,
                                    'MaxPcrInterval': 123,
                                    'MinEbpInterval': 123,
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'NullPacketBitrate': 123.0,
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'RateMode': 'VBR'|'CBR',
                                    'Scte35Esam': {
                                        'Scte35EsamPid': 123
                                    },
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                    'SegmentationTime': 123.0,
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'M3u8Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'AudioFramesPerPes': 123,
                                    'AudioPids': [
                                        123,
                                    ],
                                    'NielsenId3': 'INSERT'|'NONE',
                                    'PatInterval': 123,
                                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                    'PcrPid': 123,
                                    'PmtInterval': 123,
                                    'PmtPid': 123,
                                    'PrivateMetadataPid': 123,
                                    'ProgramNumber': 123,
                                    'Scte35Pid': 123,
                                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                    'TimedMetadataPid': 123,
                                    'TransportStreamId': 123,
                                    'VideoPid': 123
                                },
                                'MovSettings': {
                                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                    'PaddingControl': 'OMNEON'|'NONE',
                                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                },
                                'Mp4Settings': {
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                    'CttsVersion': 123,
                                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                    'Mp4MajorBrand': 'string'
                                },
                                'MpdSettings': {
                                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                    'Scte35Esam': 'INSERT'|'NONE',
                                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                                },
                                'MxfSettings': {
                                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                                }
                            },
                            'Extension': 'string',
                            'NameModifier': 'string',
                            'OutputSettings': {
                                'HlsSettings': {
                                    'AudioGroupId': 'string',
                                    'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                    'AudioRenditionSets': 'string',
                                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                    'SegmentModifier': 'string'
                                }
                            },
                            'Preset': 'string',
                            'VideoDescription': {
                                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                'AntiAlias': 'DISABLED'|'ENABLED',
                                'CodecSettings': {
                                    'Av1Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'MaxBitrate': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'QvbrSettings': {
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'QVBR',
                                        'Slices': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'AvcIntraSettings': {
                                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                        'AvcIntraUhdSettings': {
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                        },
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                    'FrameCaptureSettings': {
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'MaxCaptures': 123,
                                        'Quality': 123
                                    },
                                    'H264Settings': {
                                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'EntropyEncoding': 'CABAC'|'CAVLC',
                                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'RepeatPps': 'DISABLED'|'ENABLED',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'RP2027',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                    },
                                    'H265Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopBReference': 'DISABLED'|'ENABLED',
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'NumberReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                        'QvbrSettings': {
                                            'MaxAverageBitrate': 123,
                                            'QvbrQualityLevel': 123,
                                            'QvbrQualityLevelFineTune': 123.0
                                        },
                                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                        'Slices': 123,
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'TemporalIds': 'DISABLED'|'ENABLED',
                                        'Tiles': 'DISABLED'|'ENABLED',
                                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                    },
                                    'Mpeg2Settings': {
                                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                        'Bitrate': 123,
                                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                        'CodecProfile': 'MAIN'|'PROFILE_422',
                                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopClosedCadence': 123,
                                        'GopSize': 123.0,
                                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                                        'HrdBufferInitialFillPercentage': 123,
                                        'HrdBufferSize': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                        'MaxBitrate': 123,
                                        'MinIInterval': 123,
                                        'NumberBFramesBetweenReferenceFrames': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                        'RateControlMode': 'VBR'|'CBR',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Softness': 123,
                                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                        'Syntax': 'DEFAULT'|'D_10',
                                        'Telecine': 'NONE'|'SOFT'|'HARD',
                                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                    },
                                    'ProresSettings': {
                                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD'
                                    },
                                    'Vc3Settings': {
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                        'SlowPal': 'DISABLED'|'ENABLED',
                                        'Telecine': 'NONE'|'HARD',
                                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                    },
                                    'Vp8Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    },
                                    'Vp9Settings': {
                                        'Bitrate': 123,
                                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                        'FramerateDenominator': 123,
                                        'FramerateNumerator': 123,
                                        'GopSize': 123.0,
                                        'HrdBufferSize': 123,
                                        'MaxBitrate': 123,
                                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                        'ParDenominator': 123,
                                        'ParNumerator': 123,
                                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                        'RateControlMode': 'VBR'
                                    }
                                },
                                'ColorMetadata': 'IGNORE'|'INSERT',
                                'Crop': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                'FixedAfd': 123,
                                'Height': 123,
                                'Position': {
                                    'Height': 123,
                                    'Width': 123,
                                    'X': 123,
                                    'Y': 123
                                },
                                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                'Sharpness': 123,
                                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                'VideoPreprocessors': {
                                    'ColorCorrector': {
                                        'Brightness': 123,
                                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                        'Contrast': 123,
                                        'Hdr10Metadata': {
                                            'BluePrimaryX': 123,
                                            'BluePrimaryY': 123,
                                            'GreenPrimaryX': 123,
                                            'GreenPrimaryY': 123,
                                            'MaxContentLightLevel': 123,
                                            'MaxFrameAverageLightLevel': 123,
                                            'MaxLuminance': 123,
                                            'MinLuminance': 123,
                                            'RedPrimaryX': 123,
                                            'RedPrimaryY': 123,
                                            'WhitePointX': 123,
                                            'WhitePointY': 123
                                        },
                                        'Hue': 123,
                                        'Saturation': 123
                                    },
                                    'Deinterlacer': {
                                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                    },
                                    'DolbyVision': {
                                        'L6Metadata': {
                                            'MaxCll': 123,
                                            'MaxFall': 123
                                        },
                                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                        'Profile': 'PROFILE_5'
                                    },
                                    'ImageInserter': {
                                        'InsertableImages': [
                                            {
                                                'Duration': 123,
                                                'FadeIn': 123,
                                                'FadeOut': 123,
                                                'Height': 123,
                                                'ImageInserterInput': 'string',
                                                'ImageX': 123,
                                                'ImageY': 123,
                                                'Layer': 123,
                                                'Opacity': 123,
                                                'StartTime': 'string',
                                                'Width': 123
                                            },
                                        ]
                                    },
                                    'NoiseReducer': {
                                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                        'FilterSettings': {
                                            'Strength': 123
                                        },
                                        'SpatialFilterSettings': {
                                            'PostFilterSharpenStrength': 123,
                                            'Speed': 123,
                                            'Strength': 123
                                        },
                                        'TemporalFilterSettings': {
                                            'AggressiveMode': 123,
                                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                            'Speed': 123,
                                            'Strength': 123
                                        }
                                    },
                                    'PartnerWatermarking': {
                                        'NexguardFileMarkerSettings': {
                                            'License': 'string',
                                            'Payload': 123,
                                            'Preset': 'string',
                                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                        }
                                    },
                                    'TimecodeBurnin': {
                                        'FontSize': 123,
                                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                        'Prefix': 'string'
                                    }
                                },
                                'Width': 123
                            }
                        },
                    ]
                },
            ],
            'TimecodeConfig': {
                'Anchor': 'string',
                'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                'Start': 'string',
                'TimestampOffset': 'string'
            },
            'TimedMetadataInsertion': {
                'Id3Insertions': [
                    {
                        'Id3': 'string',
                        'Timecode': 'string'
                    },
                ]
            }
        },
        'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • JobTemplate (dict) -- A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
      • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
        • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your job templates.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for Job template creation.
      • Description (string) -- An optional description you create for each job template.
      • HopDestinations (list) -- Optional list of hop destinations.
        • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
          • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
          • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
          • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the Job template was last updated.
      • Name (string) -- A name you create for each job template. Each name must be unique within your account.
      • Priority (integer) -- Relative priority on the job.
      • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
      • Settings (dict) -- JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.
        • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
        • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
          • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
        • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
          • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
            • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
          • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
          • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
            • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
        • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
          • (dict) -- Specified video input in a template.
            • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
              • (string) --
                • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                  • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                    • (string) --
            • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
              • (string) --
                • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                  • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                  • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                  • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                  • LanguageCode (string) -- Selects a specific language code from within an audio source.
                  • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                  • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                    • (integer) --
                  • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                  • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                    • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                      • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                        • (dict) -- OutputChannel mapping settings.
                          • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                            • (integer) --
                          • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                            • (float) --
                    • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                  • SelectorType (string) -- Specifies the type of the audio selector.
                  • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                    • (integer) --
            • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
              • (string) --
                • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                  • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                  • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                    • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                      • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                    • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                      • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                      • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                    • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                      • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                        • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                        • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                      • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                      • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                    • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                    • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                      • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                    • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                      • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
            • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
            • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
            • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
            • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
              • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
            • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
            • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
            • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
            • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
              • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
              • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
              • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
              • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
              • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
              • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
        • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
          • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
            • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
            • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
          • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
          • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
          • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
            • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
            • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
          • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
          • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
        • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
          • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
          • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
        • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
          • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
          • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
          • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
          • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
          • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
          • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
          • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
          • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
          • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
          • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
          • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
        • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
          • (dict) -- Group of outputs
            • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
              • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
            • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
            • Name (string) -- Name of the output group
            • OutputGroupSettings (dict) -- Output Group settings, including type
              • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                  • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                  • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                  • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                      • (string) --
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
              • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- DRM settings.
                  • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
              • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
              • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                  • (string) --
                • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                  • (dict) -- Caption Language Mapping
                    • CaptionChannel (integer) -- Caption channel.
                    • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                    • LanguageDescription (string) -- Caption language description.
                • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                • Encryption (dict) -- DRM settings.
                  • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                  • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                  • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                  • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                    • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                    • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                    • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                    • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                  • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
              • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                  • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                    • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                    • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                      • (string) --
                • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                  • S3Settings (dict) -- Settings associated with S3 destination
                    • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                      • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                    • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                      • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                      • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                  • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                    • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                    • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                    • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                      • (string) --
                    • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
              • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
            • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
              • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                  • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                    • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                      • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                    • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                      • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                      • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                      • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                      • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                      • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                      • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                    • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                    • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                    • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                    • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                      • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                        • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                        • CodecProfile (string) -- AAC Profile.
                        • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                        • RateControlMode (string) -- Rate Control Mode.
                        • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                        • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                        • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                        • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                      • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                      • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                      • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                        • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                        • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                        • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                        • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                        • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                      • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                        • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                        • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                        • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                        • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                        • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                        • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                        • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                        • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                        • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                        • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                        • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                        • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                        • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                        • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                        • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                        • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                        • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                        • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                      • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Sample rate in hz.
                      • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                        • SampleRate (integer) -- Sample rate in hz.
                        • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                      • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                        • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                        • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                      • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                        • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                        • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                        • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                      • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                        • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                        • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                        • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                        • SampleRate (integer) -- Sample rate in Hz.
                    • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                    • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                    • RemixSettings (dict) -- Advanced audio remixing settings.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                  • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                    • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                    • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                    • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                      • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                      • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                        • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                        • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                        • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                        • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                        • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                        • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                        • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                        • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                        • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                        • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                        • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                        • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                      • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                        • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                      • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                        • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                      • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                        • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                      • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                        • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                        • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                          • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                      • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                        • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                      • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                        • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                    • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                    • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                • ContainerSettings (dict) -- Container specific settings.
                  • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                    • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                    • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                  • F4vSettings (dict) -- Settings for F4v container
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                  • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                    • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                      • (integer) --
                    • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                    • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                    • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                      • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                      • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                      • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                    • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                      • (integer) --
                    • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                      • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                    • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                    • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                    • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                    • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                    • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                    • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                    • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                    • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                    • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                    • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                    • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                    • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                    • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                    • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                    • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                    • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                    • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                    • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                  • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                    • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                      • (integer) --
                    • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                    • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                    • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                    • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                    • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                    • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                    • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                    • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                    • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                    • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                    • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                    • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                    • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                  • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                    • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                    • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                    • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                  • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                    • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                    • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                    • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                  • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                    • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                    • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                    • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                    • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                    • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                  • MxfSettings (dict) -- These settings relate to your MXF output container.
                    • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                    • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                • OutputSettings (dict) -- Specific settings for this type of output.
                  • HlsSettings (dict) -- Settings for HLS output groups
                    • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                    • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                    • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                    • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                    • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                    • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                    • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                  • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                  • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                  • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                    • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                      • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                    • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                      • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                      • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                    • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                      • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                      • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                      • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                      • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                    • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                      • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                      • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                      • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                      • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                    • H265Settings (dict) -- Settings for H265 codec
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- H.265 Level.
                      • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                        • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                        • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                        • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                      • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                      • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                      • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                      • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                      • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                    • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                      • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                      • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                      • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                      • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                      • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                      • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                      • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                      • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                      • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                      • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                      • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                    • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                      • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                    • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                      • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                      • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                      • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                    • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                      • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                      • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                      • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                      • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                      • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                      • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                      • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                      • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                      • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                      • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                      • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                      • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                  • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                  • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                  • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                  • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                  • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                    • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                    • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                    • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                    • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                  • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                  • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                  • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                  • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                  • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                    • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                      • Brightness (integer) -- Brightness level.
                      • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                      • Contrast (integer) -- Contrast level.
                      • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                        • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                        • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                        • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                        • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                      • Hue (integer) -- Hue in degrees.
                      • Saturation (integer) -- Saturation level.
                    • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                      • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                      • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                      • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                    • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                      • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                        • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                        • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                      • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                      • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                    • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                        • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                          • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                          • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                          • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                          • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                          • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                          • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                          • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                          • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                          • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                          • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                          • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                    • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                      • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                      • FilterSettings (dict) -- Settings for a noise reducer filter
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                        • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                        • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                        • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                      • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                        • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                        • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                        • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                        • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                    • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                      • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                        • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                        • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                        • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                    • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                      • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                      • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                      • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                  • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
          • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
          • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
          • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
          • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
        • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
          • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
            • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
              • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
              • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
      • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
      • Type (string) -- A job template can be of two types: system or custom. System or built-in job templates can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
update_preset(**kwargs)

Modify one of your existing presets.

See also: AWS API Documentation

Request Syntax

response = client.update_preset(
    Category='string',
    Description='string',
    Name='string',
    Settings={
        'AudioDescriptions': [
            {
                'AudioChannelTaggingSettings': {
                    'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                },
                'AudioNormalizationSettings': {
                    'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                    'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                    'CorrectionGateLevel': 123,
                    'LoudnessLogging': 'LOG'|'DONT_LOG',
                    'PeakCalculation': 'TRUE_PEAK'|'NONE',
                    'TargetLkfs': 123.0
                },
                'AudioSourceName': 'string',
                'AudioType': 123,
                'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                'CodecSettings': {
                    'AacSettings': {
                        'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                        'Bitrate': 123,
                        'CodecProfile': 'LC'|'HEV1'|'HEV2',
                        'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                        'RateControlMode': 'CBR'|'VBR',
                        'RawFormat': 'LATM_LOAS'|'NONE',
                        'SampleRate': 123,
                        'Specification': 'MPEG2'|'MPEG4',
                        'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                    },
                    'Ac3Settings': {
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                        'Dialnorm': 123,
                        'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                        'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                        'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                        'LfeFilter': 'ENABLED'|'DISABLED',
                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'SampleRate': 123
                    },
                    'AiffSettings': {
                        'BitDepth': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                    'Eac3AtmosSettings': {
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN',
                        'CodingMode': 'CODING_MODE_9_1_6',
                        'DialogueIntelligence': 'ENABLED'|'DISABLED',
                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'LoRoCenterMixLevel': 123.0,
                        'LoRoSurroundMixLevel': 123.0,
                        'LtRtCenterMixLevel': 123.0,
                        'LtRtSurroundMixLevel': 123.0,
                        'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                        'SampleRate': 123,
                        'SpeechThreshold': 123,
                        'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                    },
                    'Eac3Settings': {
                        'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                        'Bitrate': 123,
                        'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                        'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                        'DcFilter': 'ENABLED'|'DISABLED',
                        'Dialnorm': 123,
                        'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                        'LfeControl': 'LFE'|'NO_LFE',
                        'LfeFilter': 'ENABLED'|'DISABLED',
                        'LoRoCenterMixLevel': 123.0,
                        'LoRoSurroundMixLevel': 123.0,
                        'LtRtCenterMixLevel': 123.0,
                        'LtRtSurroundMixLevel': 123.0,
                        'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                        'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                        'SampleRate': 123,
                        'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                        'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                        'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                    },
                    'Mp2Settings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'Mp3Settings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'RateControlMode': 'CBR'|'VBR',
                        'SampleRate': 123,
                        'VbrQuality': 123
                    },
                    'OpusSettings': {
                        'Bitrate': 123,
                        'Channels': 123,
                        'SampleRate': 123
                    },
                    'VorbisSettings': {
                        'Channels': 123,
                        'SampleRate': 123,
                        'VbrQuality': 123
                    },
                    'WavSettings': {
                        'BitDepth': 123,
                        'Channels': 123,
                        'Format': 'RIFF'|'RF64',
                        'SampleRate': 123
                    }
                },
                'CustomLanguageCode': 'string',
                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                'RemixSettings': {
                    'ChannelMapping': {
                        'OutputChannels': [
                            {
                                'InputChannels': [
                                    123,
                                ],
                                'InputChannelsFineTune': [
                                    123.0,
                                ]
                            },
                        ]
                    },
                    'ChannelsIn': 123,
                    'ChannelsOut': 123
                },
                'StreamName': 'string'
            },
        ],
        'CaptionDescriptions': [
            {
                'CustomLanguageCode': 'string',
                'DestinationSettings': {
                    'BurninDestinationSettings': {
                        'Alignment': 'CENTERED'|'LEFT',
                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                        'BackgroundOpacity': 123,
                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'FontOpacity': 123,
                        'FontResolution': 123,
                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                        'FontSize': 123,
                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'OutlineSize': 123,
                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                        'ShadowOpacity': 123,
                        'ShadowXOffset': 123,
                        'ShadowYOffset': 123,
                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                        'XPosition': 123,
                        'YPosition': 123
                    },
                    'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                    'DvbSubDestinationSettings': {
                        'Alignment': 'CENTERED'|'LEFT',
                        'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                        'BackgroundOpacity': 123,
                        'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'FontOpacity': 123,
                        'FontResolution': 123,
                        'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                        'FontSize': 123,
                        'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                        'OutlineSize': 123,
                        'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                        'ShadowOpacity': 123,
                        'ShadowXOffset': 123,
                        'ShadowYOffset': 123,
                        'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                        'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                        'XPosition': 123,
                        'YPosition': 123
                    },
                    'EmbeddedDestinationSettings': {
                        'Destination608ChannelNumber': 123,
                        'Destination708ServiceNumber': 123
                    },
                    'ImscDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    },
                    'SccDestinationSettings': {
                        'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                    },
                    'TeletextDestinationSettings': {
                        'PageNumber': 'string',
                        'PageTypes': [
                            'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                        ]
                    },
                    'TtmlDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    },
                    'WebvttDestinationSettings': {
                        'StylePassthrough': 'ENABLED'|'DISABLED'
                    }
                },
                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                'LanguageDescription': 'string'
            },
        ],
        'ContainerSettings': {
            'CmfcSettings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioGroupId': 'string',
                'AudioRenditionSets': 'string',
                'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                'Scte35Esam': 'INSERT'|'NONE',
                'Scte35Source': 'PASSTHROUGH'|'NONE'
            },
            'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
            'F4vSettings': {
                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
            },
            'M2tsSettings': {
                'AudioBufferModel': 'DVB'|'ATSC',
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioFramesPerPes': 123,
                'AudioPids': [
                    123,
                ],
                'Bitrate': 123,
                'BufferModel': 'MULTIPLEX'|'NONE',
                'DvbNitSettings': {
                    'NetworkId': 123,
                    'NetworkName': 'string',
                    'NitInterval': 123
                },
                'DvbSdtSettings': {
                    'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                    'SdtInterval': 123,
                    'ServiceName': 'string',
                    'ServiceProviderName': 'string'
                },
                'DvbSubPids': [
                    123,
                ],
                'DvbTdtSettings': {
                    'TdtInterval': 123
                },
                'DvbTeletextPid': 123,
                'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                'FragmentTime': 123.0,
                'MaxPcrInterval': 123,
                'MinEbpInterval': 123,
                'NielsenId3': 'INSERT'|'NONE',
                'NullPacketBitrate': 123.0,
                'PatInterval': 123,
                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                'PcrPid': 123,
                'PmtInterval': 123,
                'PmtPid': 123,
                'PrivateMetadataPid': 123,
                'ProgramNumber': 123,
                'RateMode': 'VBR'|'CBR',
                'Scte35Esam': {
                    'Scte35EsamPid': 123
                },
                'Scte35Pid': 123,
                'Scte35Source': 'PASSTHROUGH'|'NONE',
                'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                'SegmentationTime': 123.0,
                'TimedMetadataPid': 123,
                'TransportStreamId': 123,
                'VideoPid': 123
            },
            'M3u8Settings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'AudioFramesPerPes': 123,
                'AudioPids': [
                    123,
                ],
                'NielsenId3': 'INSERT'|'NONE',
                'PatInterval': 123,
                'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                'PcrPid': 123,
                'PmtInterval': 123,
                'PmtPid': 123,
                'PrivateMetadataPid': 123,
                'ProgramNumber': 123,
                'Scte35Pid': 123,
                'Scte35Source': 'PASSTHROUGH'|'NONE',
                'TimedMetadata': 'PASSTHROUGH'|'NONE',
                'TimedMetadataPid': 123,
                'TransportStreamId': 123,
                'VideoPid': 123
            },
            'MovSettings': {
                'ClapAtom': 'INCLUDE'|'EXCLUDE',
                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                'PaddingControl': 'OMNEON'|'NONE',
                'Reference': 'SELF_CONTAINED'|'EXTERNAL'
            },
            'Mp4Settings': {
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'CslgAtom': 'INCLUDE'|'EXCLUDE',
                'CttsVersion': 123,
                'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                'Mp4MajorBrand': 'string'
            },
            'MpdSettings': {
                'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                'Scte35Esam': 'INSERT'|'NONE',
                'Scte35Source': 'PASSTHROUGH'|'NONE'
            },
            'MxfSettings': {
                'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                'Profile': 'D_10'|'XDCAM'|'OP1A'
            }
        },
        'VideoDescription': {
            'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
            'AntiAlias': 'DISABLED'|'ENABLED',
            'CodecSettings': {
                'Av1Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'MaxBitrate': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'QvbrSettings': {
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'QVBR',
                    'Slices': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                },
                'AvcIntraSettings': {
                    'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                    'AvcIntraUhdSettings': {
                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                    },
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD'
                },
                'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                'FrameCaptureSettings': {
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'MaxCaptures': 123,
                    'Quality': 123
                },
                'H264Settings': {
                    'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                    'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'EntropyEncoding': 'CABAC'|'CAVLC',
                    'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopBReference': 'DISABLED'|'ENABLED',
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'NumberReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                    'QvbrSettings': {
                        'MaxAverageBitrate': 123,
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                    'RepeatPps': 'DISABLED'|'ENABLED',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                    'Slices': 123,
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Softness': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Syntax': 'DEFAULT'|'RP2027',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                },
                'H265Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                    'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                    'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopBReference': 'DISABLED'|'ENABLED',
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'NumberReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                    'QvbrSettings': {
                        'MaxAverageBitrate': 123,
                        'QvbrQualityLevel': 123,
                        'QvbrQualityLevelFineTune': 123.0
                    },
                    'RateControlMode': 'VBR'|'CBR'|'QVBR',
                    'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                    'Slices': 123,
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'TemporalIds': 'DISABLED'|'ENABLED',
                    'Tiles': 'DISABLED'|'ENABLED',
                    'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                    'WriteMp4PackagingType': 'HVC1'|'HEV1'
                },
                'Mpeg2Settings': {
                    'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                    'Bitrate': 123,
                    'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                    'CodecProfile': 'MAIN'|'PROFILE_422',
                    'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopClosedCadence': 123,
                    'GopSize': 123.0,
                    'GopSizeUnits': 'FRAMES'|'SECONDS',
                    'HrdBufferInitialFillPercentage': 123,
                    'HrdBufferSize': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                    'MaxBitrate': 123,
                    'MinIInterval': 123,
                    'NumberBFramesBetweenReferenceFrames': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                    'RateControlMode': 'VBR'|'CBR',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SceneChangeDetect': 'DISABLED'|'ENABLED',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Softness': 123,
                    'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                    'Syntax': 'DEFAULT'|'D_10',
                    'Telecine': 'NONE'|'SOFT'|'HARD',
                    'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                },
                'ProresSettings': {
                    'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD'
                },
                'Vc3Settings': {
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                    'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                    'SlowPal': 'DISABLED'|'ENABLED',
                    'Telecine': 'NONE'|'HARD',
                    'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                },
                'Vp8Settings': {
                    'Bitrate': 123,
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'HrdBufferSize': 123,
                    'MaxBitrate': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                    'RateControlMode': 'VBR'
                },
                'Vp9Settings': {
                    'Bitrate': 123,
                    'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                    'FramerateDenominator': 123,
                    'FramerateNumerator': 123,
                    'GopSize': 123.0,
                    'HrdBufferSize': 123,
                    'MaxBitrate': 123,
                    'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                    'ParDenominator': 123,
                    'ParNumerator': 123,
                    'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                    'RateControlMode': 'VBR'
                }
            },
            'ColorMetadata': 'IGNORE'|'INSERT',
            'Crop': {
                'Height': 123,
                'Width': 123,
                'X': 123,
                'Y': 123
            },
            'DropFrameTimecode': 'DISABLED'|'ENABLED',
            'FixedAfd': 123,
            'Height': 123,
            'Position': {
                'Height': 123,
                'Width': 123,
                'X': 123,
                'Y': 123
            },
            'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
            'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
            'Sharpness': 123,
            'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
            'VideoPreprocessors': {
                'ColorCorrector': {
                    'Brightness': 123,
                    'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                    'Contrast': 123,
                    'Hdr10Metadata': {
                        'BluePrimaryX': 123,
                        'BluePrimaryY': 123,
                        'GreenPrimaryX': 123,
                        'GreenPrimaryY': 123,
                        'MaxContentLightLevel': 123,
                        'MaxFrameAverageLightLevel': 123,
                        'MaxLuminance': 123,
                        'MinLuminance': 123,
                        'RedPrimaryX': 123,
                        'RedPrimaryY': 123,
                        'WhitePointX': 123,
                        'WhitePointY': 123
                    },
                    'Hue': 123,
                    'Saturation': 123
                },
                'Deinterlacer': {
                    'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                    'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                    'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                },
                'DolbyVision': {
                    'L6Metadata': {
                        'MaxCll': 123,
                        'MaxFall': 123
                    },
                    'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                    'Profile': 'PROFILE_5'
                },
                'ImageInserter': {
                    'InsertableImages': [
                        {
                            'Duration': 123,
                            'FadeIn': 123,
                            'FadeOut': 123,
                            'Height': 123,
                            'ImageInserterInput': 'string',
                            'ImageX': 123,
                            'ImageY': 123,
                            'Layer': 123,
                            'Opacity': 123,
                            'StartTime': 'string',
                            'Width': 123
                        },
                    ]
                },
                'NoiseReducer': {
                    'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                    'FilterSettings': {
                        'Strength': 123
                    },
                    'SpatialFilterSettings': {
                        'PostFilterSharpenStrength': 123,
                        'Speed': 123,
                        'Strength': 123
                    },
                    'TemporalFilterSettings': {
                        'AggressiveMode': 123,
                        'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                        'Speed': 123,
                        'Strength': 123
                    }
                },
                'PartnerWatermarking': {
                    'NexguardFileMarkerSettings': {
                        'License': 'string',
                        'Payload': 123,
                        'Preset': 'string',
                        'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                    }
                },
                'TimecodeBurnin': {
                    'FontSize': 123,
                    'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                    'Prefix': 'string'
                }
            },
            'Width': 123
        }
    }
)
Parameters
  • Category (string) -- The new category for the preset, if you are changing it.
  • Description (string) -- The new description for the preset, if you are changing it.
  • Name (string) -- [REQUIRED] The name of the preset you are modifying.
  • Settings (dict) --

    Settings for preset

    • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
      • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
        • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
          • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
        • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
          • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
          • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
          • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
          • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
          • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
          • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
        • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
        • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
        • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
        • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
          • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
            • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
            • CodecProfile (string) -- AAC Profile.
            • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
            • RateControlMode (string) -- Rate Control Mode.
            • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
            • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
            • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
            • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
          • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
            • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
            • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
            • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
            • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
            • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
          • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
            • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
            • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
            • SampleRate (integer) -- Sample rate in hz.
          • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
          • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
            • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
            • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
            • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
            • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
            • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
            • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
            • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
            • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
            • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
            • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
            • StereoDownmix (string) -- Choose how the service does stereo downmixing.
            • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
          • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
            • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
            • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
            • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
            • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
            • DcFilter (string) -- Activates a DC highpass filter for all input channels.
            • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
            • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
            • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
            • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
            • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
            • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
            • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
            • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
            • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
            • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
            • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
            • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
            • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
            • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
            • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
          • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
            • Bitrate (integer) -- Specify the average bitrate in bits per second.
            • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
            • SampleRate (integer) -- Sample rate in hz.
          • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
            • Bitrate (integer) -- Specify the average bitrate in bits per second.
            • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
            • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
            • SampleRate (integer) -- Sample rate in hz.
            • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
          • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
            • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
            • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
            • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
          • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
            • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
            • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
            • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
          • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
            • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
            • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
            • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
            • SampleRate (integer) -- Sample rate in Hz.
        • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
        • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
        • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
        • RemixSettings (dict) -- Advanced audio remixing settings.
          • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
            • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
              • (dict) -- OutputChannel mapping settings.
                • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                  • (integer) --
                • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                  • (float) --
          • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
          • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
        • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
    • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
      • (dict) -- Caption Description for preset
        • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
        • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
          • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
            • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
            • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
            • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
            • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
            • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
            • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
            • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
            • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
            • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
            • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
          • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
          • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
            • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
            • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
            • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
            • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
            • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
            • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
            • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
            • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
            • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
            • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
            • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
            • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
            • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
          • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
            • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
            • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
          • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
            • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
          • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
            • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
          • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
            • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
            • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
              • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
          • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
            • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
          • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
            • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
        • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
        • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
    • ContainerSettings (dict) -- Container specific settings.
      • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
        • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
        • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
        • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
        • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
        • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
        • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
      • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
      • F4vSettings (dict) -- Settings for F4v container
        • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
      • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
        • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
        • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
          • (integer) --
        • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
        • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
        • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
          • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
          • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
          • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
          • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
          • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
        • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
          • (integer) --
        • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
          • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
        • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
        • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
        • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
        • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
        • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
        • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
        • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
        • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
        • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
        • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
        • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
        • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
        • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
        • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
        • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
        • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
        • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
          • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
        • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
        • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
        • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
        • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
        • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
        • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
        • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
        • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
      • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
        • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
          • (integer) --
        • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
        • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
        • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
        • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
        • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
        • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
        • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
        • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
        • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
        • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
        • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
        • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
        • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
      • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
        • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
        • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
        • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
        • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
        • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
      • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
        • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
        • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
        • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
        • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
      • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
        • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
        • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
        • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
        • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
        • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
      • MxfSettings (dict) -- These settings relate to your MXF output container.
        • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
        • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
    • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
      • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
      • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
      • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
        • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
          • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
        • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
          • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
          • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
            • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
        • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
        • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
          • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
          • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
          • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
          • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
        • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
          • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
          • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
          • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
          • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
          • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
          • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
          • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
          • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
        • H265Settings (dict) -- Settings for H265 codec
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
          • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- H.265 Level.
          • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
            • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
            • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
            • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
          • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
          • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
          • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
          • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
          • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
          • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
          • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
          • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
          • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
        • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
          • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
          • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
          • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
          • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
          • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
          • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
          • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
          • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
          • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
          • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
          • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
          • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
          • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
        • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
          • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
        • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
          • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
          • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
          • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
          • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
        • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
          • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
          • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
          • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
        • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
          • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
          • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
          • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
          • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
          • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
          • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
          • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
          • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
          • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
          • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
          • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
      • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
      • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
        • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
        • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
        • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
        • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
      • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
      • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
      • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
      • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
        • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
        • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
        • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
        • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
      • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
      • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
      • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
      • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
      • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
        • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
          • Brightness (integer) -- Brightness level.
          • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
          • Contrast (integer) -- Contrast level.
          • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
            • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
            • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
            • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
            • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
            • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
          • Hue (integer) -- Hue in degrees.
          • Saturation (integer) -- Saturation level.
        • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
          • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
          • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
          • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
        • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
          • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
            • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
            • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
          • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
          • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
        • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
          • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
            • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
              • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
              • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
              • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
              • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
              • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
              • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
              • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
              • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
              • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
              • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
              • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
        • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
          • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
          • FilterSettings (dict) -- Settings for a noise reducer filter
            • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
          • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
            • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
            • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
            • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
          • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
            • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
            • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
            • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
            • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
        • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
          • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
            • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
            • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
            • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
            • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
        • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
          • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
          • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
          • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
      • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
Return type

dict

Returns

Response Syntax

{
    'Preset': {
        'Arn': 'string',
        'Category': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'Settings': {
            'AudioDescriptions': [
                {
                    'AudioChannelTaggingSettings': {
                        'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                    },
                    'AudioNormalizationSettings': {
                        'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                        'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                        'CorrectionGateLevel': 123,
                        'LoudnessLogging': 'LOG'|'DONT_LOG',
                        'PeakCalculation': 'TRUE_PEAK'|'NONE',
                        'TargetLkfs': 123.0
                    },
                    'AudioSourceName': 'string',
                    'AudioType': 123,
                    'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'CodecSettings': {
                        'AacSettings': {
                            'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                            'Bitrate': 123,
                            'CodecProfile': 'LC'|'HEV1'|'HEV2',
                            'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                            'RateControlMode': 'CBR'|'VBR',
                            'RawFormat': 'LATM_LOAS'|'NONE',
                            'SampleRate': 123,
                            'Specification': 'MPEG2'|'MPEG4',
                            'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                        },
                        'Ac3Settings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                            'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'SampleRate': 123
                        },
                        'AiffSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                        'Eac3AtmosSettings': {
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN',
                            'CodingMode': 'CODING_MODE_9_1_6',
                            'DialogueIntelligence': 'ENABLED'|'DISABLED',
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                            'SampleRate': 123,
                            'SpeechThreshold': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Eac3Settings': {
                            'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                            'Bitrate': 123,
                            'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                            'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                            'DcFilter': 'ENABLED'|'DISABLED',
                            'Dialnorm': 123,
                            'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                            'LfeControl': 'LFE'|'NO_LFE',
                            'LfeFilter': 'ENABLED'|'DISABLED',
                            'LoRoCenterMixLevel': 123.0,
                            'LoRoSurroundMixLevel': 123.0,
                            'LtRtCenterMixLevel': 123.0,
                            'LtRtSurroundMixLevel': 123.0,
                            'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                            'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                            'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                            'SampleRate': 123,
                            'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                            'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                            'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                        },
                        'Mp2Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'Mp3Settings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'RateControlMode': 'CBR'|'VBR',
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'OpusSettings': {
                            'Bitrate': 123,
                            'Channels': 123,
                            'SampleRate': 123
                        },
                        'VorbisSettings': {
                            'Channels': 123,
                            'SampleRate': 123,
                            'VbrQuality': 123
                        },
                        'WavSettings': {
                            'BitDepth': 123,
                            'Channels': 123,
                            'Format': 'RIFF'|'RF64',
                            'SampleRate': 123
                        }
                    },
                    'CustomLanguageCode': 'string',
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                    'RemixSettings': {
                        'ChannelMapping': {
                            'OutputChannels': [
                                {
                                    'InputChannels': [
                                        123,
                                    ],
                                    'InputChannelsFineTune': [
                                        123.0,
                                    ]
                                },
                            ]
                        },
                        'ChannelsIn': 123,
                        'ChannelsOut': 123
                    },
                    'StreamName': 'string'
                },
            ],
            'CaptionDescriptions': [
                {
                    'CustomLanguageCode': 'string',
                    'DestinationSettings': {
                        'BurninDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                        'DvbSubDestinationSettings': {
                            'Alignment': 'CENTERED'|'LEFT',
                            'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                            'BackgroundOpacity': 123,
                            'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'FontOpacity': 123,
                            'FontResolution': 123,
                            'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                            'FontSize': 123,
                            'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                            'OutlineSize': 123,
                            'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                            'ShadowOpacity': 123,
                            'ShadowXOffset': 123,
                            'ShadowYOffset': 123,
                            'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                            'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                            'XPosition': 123,
                            'YPosition': 123
                        },
                        'EmbeddedDestinationSettings': {
                            'Destination608ChannelNumber': 123,
                            'Destination708ServiceNumber': 123
                        },
                        'ImscDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'SccDestinationSettings': {
                            'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                        },
                        'TeletextDestinationSettings': {
                            'PageNumber': 'string',
                            'PageTypes': [
                                'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                            ]
                        },
                        'TtmlDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        },
                        'WebvttDestinationSettings': {
                            'StylePassthrough': 'ENABLED'|'DISABLED'
                        }
                    },
                    'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                    'LanguageDescription': 'string'
                },
            ],
            'ContainerSettings': {
                'CmfcSettings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioGroupId': 'string',
                    'AudioRenditionSets': 'string',
                    'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                    'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                    'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                'F4vSettings': {
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                },
                'M2tsSettings': {
                    'AudioBufferModel': 'DVB'|'ATSC',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'Bitrate': 123,
                    'BufferModel': 'MULTIPLEX'|'NONE',
                    'DvbNitSettings': {
                        'NetworkId': 123,
                        'NetworkName': 'string',
                        'NitInterval': 123
                    },
                    'DvbSdtSettings': {
                        'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                        'SdtInterval': 123,
                        'ServiceName': 'string',
                        'ServiceProviderName': 'string'
                    },
                    'DvbSubPids': [
                        123,
                    ],
                    'DvbTdtSettings': {
                        'TdtInterval': 123
                    },
                    'DvbTeletextPid': 123,
                    'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                    'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                    'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                    'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                    'FragmentTime': 123.0,
                    'MaxPcrInterval': 123,
                    'MinEbpInterval': 123,
                    'NielsenId3': 'INSERT'|'NONE',
                    'NullPacketBitrate': 123.0,
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'RateMode': 'VBR'|'CBR',
                    'Scte35Esam': {
                        'Scte35EsamPid': 123
                    },
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                    'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                    'SegmentationTime': 123.0,
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'M3u8Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'AudioFramesPerPes': 123,
                    'AudioPids': [
                        123,
                    ],
                    'NielsenId3': 'INSERT'|'NONE',
                    'PatInterval': 123,
                    'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                    'PcrPid': 123,
                    'PmtInterval': 123,
                    'PmtPid': 123,
                    'PrivateMetadataPid': 123,
                    'ProgramNumber': 123,
                    'Scte35Pid': 123,
                    'Scte35Source': 'PASSTHROUGH'|'NONE',
                    'TimedMetadata': 'PASSTHROUGH'|'NONE',
                    'TimedMetadataPid': 123,
                    'TransportStreamId': 123,
                    'VideoPid': 123
                },
                'MovSettings': {
                    'ClapAtom': 'INCLUDE'|'EXCLUDE',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                    'PaddingControl': 'OMNEON'|'NONE',
                    'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                },
                'Mp4Settings': {
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CslgAtom': 'INCLUDE'|'EXCLUDE',
                    'CttsVersion': 123,
                    'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                    'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                    'Mp4MajorBrand': 'string'
                },
                'MpdSettings': {
                    'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                    'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                    'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                    'Scte35Esam': 'INSERT'|'NONE',
                    'Scte35Source': 'PASSTHROUGH'|'NONE'
                },
                'MxfSettings': {
                    'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                    'Profile': 'D_10'|'XDCAM'|'OP1A'
                }
            },
            'VideoDescription': {
                'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                'AntiAlias': 'DISABLED'|'ENABLED',
                'CodecSettings': {
                    'Av1Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'MaxBitrate': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'QvbrSettings': {
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'QVBR',
                        'Slices': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'AvcIntraSettings': {
                        'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                        'AvcIntraUhdSettings': {
                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                        },
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                    'FrameCaptureSettings': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'MaxCaptures': 123,
                        'Quality': 123
                    },
                    'H264Settings': {
                        'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                        'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'EntropyEncoding': 'CABAC'|'CAVLC',
                        'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'RepeatPps': 'DISABLED'|'ENABLED',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'RP2027',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                    },
                    'H265Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                        'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                        'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopBReference': 'DISABLED'|'ENABLED',
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'NumberReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                        'QvbrSettings': {
                            'MaxAverageBitrate': 123,
                            'QvbrQualityLevel': 123,
                            'QvbrQualityLevelFineTune': 123.0
                        },
                        'RateControlMode': 'VBR'|'CBR'|'QVBR',
                        'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                        'Slices': 123,
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'TemporalIds': 'DISABLED'|'ENABLED',
                        'Tiles': 'DISABLED'|'ENABLED',
                        'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                        'WriteMp4PackagingType': 'HVC1'|'HEV1'
                    },
                    'Mpeg2Settings': {
                        'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                        'Bitrate': 123,
                        'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                        'CodecProfile': 'MAIN'|'PROFILE_422',
                        'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopClosedCadence': 123,
                        'GopSize': 123.0,
                        'GopSizeUnits': 'FRAMES'|'SECONDS',
                        'HrdBufferInitialFillPercentage': 123,
                        'HrdBufferSize': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                        'MaxBitrate': 123,
                        'MinIInterval': 123,
                        'NumberBFramesBetweenReferenceFrames': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                        'RateControlMode': 'VBR'|'CBR',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SceneChangeDetect': 'DISABLED'|'ENABLED',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Softness': 123,
                        'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                        'Syntax': 'DEFAULT'|'D_10',
                        'Telecine': 'NONE'|'SOFT'|'HARD',
                        'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                    },
                    'ProresSettings': {
                        'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD'
                    },
                    'Vc3Settings': {
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                        'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                        'SlowPal': 'DISABLED'|'ENABLED',
                        'Telecine': 'NONE'|'HARD',
                        'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                    },
                    'Vp8Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    },
                    'Vp9Settings': {
                        'Bitrate': 123,
                        'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123,
                        'GopSize': 123.0,
                        'HrdBufferSize': 123,
                        'MaxBitrate': 123,
                        'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                        'ParDenominator': 123,
                        'ParNumerator': 123,
                        'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                        'RateControlMode': 'VBR'
                    }
                },
                'ColorMetadata': 'IGNORE'|'INSERT',
                'Crop': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'DropFrameTimecode': 'DISABLED'|'ENABLED',
                'FixedAfd': 123,
                'Height': 123,
                'Position': {
                    'Height': 123,
                    'Width': 123,
                    'X': 123,
                    'Y': 123
                },
                'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                'Sharpness': 123,
                'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                'VideoPreprocessors': {
                    'ColorCorrector': {
                        'Brightness': 123,
                        'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                        'Contrast': 123,
                        'Hdr10Metadata': {
                            'BluePrimaryX': 123,
                            'BluePrimaryY': 123,
                            'GreenPrimaryX': 123,
                            'GreenPrimaryY': 123,
                            'MaxContentLightLevel': 123,
                            'MaxFrameAverageLightLevel': 123,
                            'MaxLuminance': 123,
                            'MinLuminance': 123,
                            'RedPrimaryX': 123,
                            'RedPrimaryY': 123,
                            'WhitePointX': 123,
                            'WhitePointY': 123
                        },
                        'Hue': 123,
                        'Saturation': 123
                    },
                    'Deinterlacer': {
                        'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                        'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                        'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                    },
                    'DolbyVision': {
                        'L6Metadata': {
                            'MaxCll': 123,
                            'MaxFall': 123
                        },
                        'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                        'Profile': 'PROFILE_5'
                    },
                    'ImageInserter': {
                        'InsertableImages': [
                            {
                                'Duration': 123,
                                'FadeIn': 123,
                                'FadeOut': 123,
                                'Height': 123,
                                'ImageInserterInput': 'string',
                                'ImageX': 123,
                                'ImageY': 123,
                                'Layer': 123,
                                'Opacity': 123,
                                'StartTime': 'string',
                                'Width': 123
                            },
                        ]
                    },
                    'NoiseReducer': {
                        'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                        'FilterSettings': {
                            'Strength': 123
                        },
                        'SpatialFilterSettings': {
                            'PostFilterSharpenStrength': 123,
                            'Speed': 123,
                            'Strength': 123
                        },
                        'TemporalFilterSettings': {
                            'AggressiveMode': 123,
                            'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                            'Speed': 123,
                            'Strength': 123
                        }
                    },
                    'PartnerWatermarking': {
                        'NexguardFileMarkerSettings': {
                            'License': 'string',
                            'Payload': 123,
                            'Preset': 'string',
                            'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                        }
                    },
                    'TimecodeBurnin': {
                        'FontSize': 123,
                        'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                        'Prefix': 'string'
                    }
                },
                'Width': 123
            }
        },
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Preset (dict) -- A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • Category (string) -- An optional category you create to organize your presets.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for preset creation.
      • Description (string) -- An optional description you create for each preset.
      • LastUpdated (datetime) -- The timestamp in epoch seconds when the preset was last updated.
      • Name (string) -- A name you create for each preset. Each name must be unique within your account.
      • Settings (dict) -- Settings for preset
        • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
          • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
            • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
              • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
            • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
              • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
              • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
              • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
              • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
              • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
              • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
            • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
            • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
            • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
            • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
              • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                • CodecProfile (string) -- AAC Profile.
                • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                • RateControlMode (string) -- Rate Control Mode.
                • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
              • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
              • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • SampleRate (integer) -- Sample rate in hz.
              • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
              • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
              • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
              • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Sample rate in hz.
              • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                • Bitrate (integer) -- Specify the average bitrate in bits per second.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                • SampleRate (integer) -- Sample rate in hz.
                • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
              • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
              • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
              • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                • SampleRate (integer) -- Sample rate in Hz.
            • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
            • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
            • RemixSettings (dict) -- Advanced audio remixing settings.
              • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                  • (dict) -- OutputChannel mapping settings.
                    • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                      • (integer) --
                    • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                      • (float) --
              • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
            • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
          • (dict) -- Caption Description for preset
            • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
            • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
              • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
              • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
              • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
              • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
              • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
              • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                  • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
              • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
              • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
            • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
            • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
        • ContainerSettings (dict) -- Container specific settings.
          • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
            • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
            • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
            • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
            • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
          • F4vSettings (dict) -- Settings for F4v container
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
          • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
            • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
              • (integer) --
            • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
            • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
            • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
              • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
              • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
              • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
              • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
            • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
              • (integer) --
            • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
              • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
            • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
            • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
            • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
            • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
            • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
            • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
            • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
            • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
            • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
            • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
            • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
            • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
            • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
            • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
            • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
            • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
            • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
            • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
          • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
            • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
              • (integer) --
            • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
            • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
            • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
            • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
            • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
            • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
            • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
            • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
            • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
            • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
            • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
            • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
            • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
          • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
            • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
            • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
            • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
          • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
            • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
            • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
            • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
            • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
          • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
            • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
            • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
            • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
            • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
            • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
          • MxfSettings (dict) -- These settings relate to your MXF output container.
            • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
            • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
        • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
          • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
          • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
          • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
            • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
              • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
            • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
              • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
              • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
            • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
              • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
              • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
              • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
              • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
            • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
              • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
              • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
              • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
              • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
            • H265Settings (dict) -- Settings for H265 codec
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- H.265 Level.
              • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
              • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
              • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
              • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
              • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
              • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
              • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
              • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
            • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
              • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
              • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
              • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
              • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
              • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
              • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
              • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
              • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
              • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
              • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
              • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
              • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
            • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
              • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
            • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
              • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
              • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
              • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
            • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
            • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
              • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
              • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
              • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
              • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
              • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
              • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
              • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
              • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
              • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
              • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
              • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
              • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
          • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
          • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
          • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
          • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
          • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
            • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
            • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
            • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
            • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
          • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
          • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
          • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
          • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
          • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
            • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
              • Brightness (integer) -- Brightness level.
              • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
              • Contrast (integer) -- Contrast level.
              • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
              • Hue (integer) -- Hue in degrees.
              • Saturation (integer) -- Saturation level.
            • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
              • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
              • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
              • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
            • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
              • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
              • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
              • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
            • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
              • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                  • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                  • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                  • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                  • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                  • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                  • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                  • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                  • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                  • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                  • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                  • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
            • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
              • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
              • FilterSettings (dict) -- Settings for a noise reducer filter
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
              • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
            • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
              • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
            • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
              • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
              • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
              • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
          • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
      • Type (string) -- A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException
update_queue(**kwargs)

Modify one of your existing queues.

See also: AWS API Documentation

Request Syntax

response = client.update_queue(
    Description='string',
    Name='string',
    ReservationPlanSettings={
        'Commitment': 'ONE_YEAR',
        'RenewalType': 'AUTO_RENEW'|'EXPIRE',
        'ReservedSlots': 123
    },
    Status='ACTIVE'|'PAUSED'
)
Parameters
  • Description (string) -- The new description for the queue, if you are changing it.
  • Name (string) -- [REQUIRED] The name of the queue that you are modifying.
  • ReservationPlanSettings (dict) --

    The new details of your pricing plan for your reserved queue. When you set up a new pricing plan to replace an expired one, you enter into another 12-month commitment. When you add capacity to your queue by increasing the number of RTS, you extend the term of your commitment to 12 months from when you add capacity. After you make these commitments, you can't cancel them.

    • Commitment (string) -- [REQUIRED] The length of the term of your reserved queue pricing plan commitment.
    • RenewalType (string) -- [REQUIRED] Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term. When your term is auto renewed, you extend your commitment by 12 months from the auto renew date. You can cancel this commitment.
    • ReservedSlots (integer) -- [REQUIRED] Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. You can't decrease the number of RTS in your reserved queue. You can increase the number of RTS by extending your existing commitment with a new 12-month commitment for the larger number. The new commitment begins when you purchase the additional capacity. You can't cancel your commitment or revert to your original commitment after you increase the capacity.
  • Status (string) -- Pause or activate a queue by changing its status between ACTIVE and PAUSED. If you pause a queue, jobs in that queue won't begin. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
Return type

dict

Returns

Response Syntax

{
    'Queue': {
        'Arn': 'string',
        'CreatedAt': datetime(2015, 1, 1),
        'Description': 'string',
        'LastUpdated': datetime(2015, 1, 1),
        'Name': 'string',
        'PricingPlan': 'ON_DEMAND'|'RESERVED',
        'ProgressingJobsCount': 123,
        'ReservationPlan': {
            'Commitment': 'ONE_YEAR',
            'ExpiresAt': datetime(2015, 1, 1),
            'PurchasedAt': datetime(2015, 1, 1),
            'RenewalType': 'AUTO_RENEW'|'EXPIRE',
            'ReservedSlots': 123,
            'Status': 'ACTIVE'|'EXPIRED'
        },
        'Status': 'ACTIVE'|'PAUSED',
        'SubmittedJobsCount': 123,
        'Type': 'SYSTEM'|'CUSTOM'
    }
}

Response Structure

  • (dict) --
    • Queue (dict) -- You can use queues to manage the resources that are available to your AWS account for running multiple transcoding jobs at the same time. If you don't specify a queue, the service sends all jobs through the default queue. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html.
      • Arn (string) -- An identifier for this resource that is unique within all of AWS.
      • CreatedAt (datetime) -- The timestamp in epoch seconds for when you created the queue.
      • Description (string) -- An optional description that you create for each queue.
      • LastUpdated (datetime) -- The timestamp in epoch seconds for when you most recently updated the queue.
      • Name (string) -- A name that you create for each queue. Each name must be unique within your account.
      • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment.
      • ProgressingJobsCount (integer) -- The estimated number of jobs with a PROGRESSING status.
      • ReservationPlan (dict) -- Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.
        • Commitment (string) -- The length of the term of your reserved queue pricing plan commitment.
        • ExpiresAt (datetime) -- The timestamp in epoch seconds for when the current pricing plan term for this reserved queue expires.
        • PurchasedAt (datetime) -- The timestamp in epoch seconds for when you set up the current pricing plan for this reserved queue.
        • RenewalType (string) -- Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term.
        • ReservedSlots (integer) -- Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. When you increase this number, you extend your existing commitment with a new 12-month commitment for a larger number of RTS. The new commitment begins when you purchase the additional capacity. You can't decrease the number of RTS in your reserved queue.
        • Status (string) -- Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
      • Status (string) -- Queues can be ACTIVE or PAUSED. If you pause a queue, the service won't begin processing jobs in that queue. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
      • SubmittedJobsCount (integer) -- The estimated number of jobs with a SUBMITTED status.
      • Type (string) -- Specifies whether this on-demand queue is system or custom. System queues are built in. You can't modify or delete system queues. You can create and modify custom queues.

Exceptions

  • MediaConvert.Client.exceptions.BadRequestException
  • MediaConvert.Client.exceptions.InternalServerErrorException
  • MediaConvert.Client.exceptions.ForbiddenException
  • MediaConvert.Client.exceptions.NotFoundException
  • MediaConvert.Client.exceptions.TooManyRequestsException
  • MediaConvert.Client.exceptions.ConflictException

Paginators

The available paginators are:

class MediaConvert.Paginator.DescribeEndpoints
paginator = client.get_paginator('describe_endpoints')
paginate(**kwargs)

Creates an iterator that will paginate through responses from MediaConvert.Client.describe_endpoints().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    Mode='DEFAULT'|'GET_ONLY',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • Mode (string) -- Optional field, defaults to DEFAULT. Specify DEFAULT for this operation to return your endpoints if any exist, or to create an endpoint for you and return it if one doesn't already exist. Specify GET_ONLY to return your endpoints if any exist, or an empty list if none exist.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Endpoints': [
        {
            'Url': 'string'
        },
    ],

}

Response Structure

  • (dict) --
    • Endpoints (list) -- List of endpoints
      • (dict) -- Describes an account-specific API endpoint.
        • Url (string) -- URL of endpoint

class MediaConvert.Paginator.ListJobTemplates
paginator = client.get_paginator('list_job_templates')
paginate(**kwargs)

Creates an iterator that will paginate through responses from MediaConvert.Client.list_job_templates().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    Category='string',
    ListBy='NAME'|'CREATION_DATE'|'SYSTEM',
    Order='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • Category (string) -- Optionally, specify a job template category to limit responses to only job templates from that category.
  • ListBy (string) -- Optional. When you request a list of job templates, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'JobTemplates': [
        {
            'AccelerationSettings': {
                'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
            },
            'Arn': 'string',
            'Category': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'HopDestinations': [
                {
                    'Priority': 123,
                    'Queue': 'string',
                    'WaitMinutes': 123
                },
            ],
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'Priority': 123,
            'Queue': 'string',
            'Settings': {
                'AdAvailOffset': 123,
                'AvailBlanking': {
                    'AvailBlankingImage': 'string'
                },
                'Esam': {
                    'ManifestConfirmConditionNotification': {
                        'MccXml': 'string'
                    },
                    'ResponseSignalPreroll': 123,
                    'SignalProcessingNotification': {
                        'SccXml': 'string'
                    }
                },
                'Inputs': [
                    {
                        'AudioSelectorGroups': {
                            'string': {
                                'AudioSelectorNames': [
                                    'string',
                                ]
                            }
                        },
                        'AudioSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                                'ExternalAudioFileInput': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'Offset': 123,
                                'Pids': [
                                    123,
                                ],
                                'ProgramSelection': 123,
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                                'Tracks': [
                                    123,
                                ]
                            }
                        },
                        'CaptionSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'SourceSettings': {
                                    'AncillarySourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'SourceAncillaryChannelNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'DvbSubSourceSettings': {
                                        'Pid': 123
                                    },
                                    'EmbeddedSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Source608ChannelNumber': 123,
                                        'Source608TrackNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'FileSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Framerate': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123
                                        },
                                        'SourceFile': 'string',
                                        'TimeDelta': 123
                                    },
                                    'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                    'TeletextSourceSettings': {
                                        'PageNumber': 'string'
                                    },
                                    'TrackSourceSettings': {
                                        'TrackNumber': 123
                                    }
                                }
                            }
                        },
                        'Crop': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'DeblockFilter': 'ENABLED'|'DISABLED',
                        'DenoiseFilter': 'ENABLED'|'DISABLED',
                        'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                        'FilterStrength': 123,
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'InputClippings': [
                            {
                                'EndTimecode': 'string',
                                'StartTimecode': 'string'
                            },
                        ],
                        'InputScanType': 'AUTO'|'PSF',
                        'Position': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'ProgramNumber': 123,
                        'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                        'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                        'TimecodeStart': 'string',
                        'VideoSelector': {
                            'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                            'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                            'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Pid': 123,
                            'ProgramNumber': 123,
                            'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                        }
                    },
                ],
                'MotionImageInserter': {
                    'Framerate': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123
                    },
                    'Input': 'string',
                    'InsertionMode': 'MOV'|'PNG',
                    'Offset': {
                        'ImageX': 123,
                        'ImageY': 123
                    },
                    'Playback': 'ONCE'|'REPEAT',
                    'StartTime': 'string'
                },
                'NielsenConfiguration': {
                    'BreakoutCode': 123,
                    'DistributorId': 'string'
                },
                'NielsenNonLinearWatermark': {
                    'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                    'AdiFilename': 'string',
                    'AssetId': 'string',
                    'AssetName': 'string',
                    'CbetSourceId': 'string',
                    'EpisodeId': 'string',
                    'MetadataDestination': 'string',
                    'SourceId': 123,
                    'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                    'TicServerUrl': 'string',
                    'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
                },
                'OutputGroups': [
                    {
                        'AutomatedEncodingSettings': {
                            'AbrSettings': {
                                'MaxAbrBitrate': 123,
                                'MaxRenditions': 123,
                                'MinAbrBitrate': 123
                            }
                        },
                        'CustomName': 'string',
                        'Name': 'string',
                        'OutputGroupSettings': {
                            'CmafGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'BaseUrl': 'string',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'DashSignaledSystemIds': [
                                            'string',
                                        ],
                                        'HlsSignaledSystemIds': [
                                            'string',
                                        ],
                                        'ResourceId': 'string',
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'FragmentLength': 123,
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'WriteDashManifest': 'DISABLED'|'ENABLED',
                                'WriteHlsManifest': 'DISABLED'|'ENABLED',
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'DashIsoGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                                'BaseUrl': 'string',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'FileGroupSettings': {
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                }
                            },
                            'HlsGroupSettings': {
                                'AdMarkers': [
                                    'ELEMENTAL'|'ELEMENTAL_SCTE35',
                                ],
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                                'BaseUrl': 'string',
                                'CaptionLanguageMappings': [
                                    {
                                        'CaptionChannel': 123,
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinFinalSegmentLength': 123.0,
                                'MinSegmentLength': 123,
                                'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                                'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                                'ProgramDateTimePeriod': 123,
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'SegmentsPerSubdirectory': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                                'TimedMetadataId3Period': 123,
                                'TimestampDeltaMilliseconds': 123
                            },
                            'MsSmoothGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'ManifestEncoding': 'UTF8'|'UTF16'
                            },
                            'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                        },
                        'Outputs': [
                            {
                                'AudioDescriptions': [
                                    {
                                        'AudioChannelTaggingSettings': {
                                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                        },
                                        'AudioNormalizationSettings': {
                                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                            'CorrectionGateLevel': 123,
                                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                            'TargetLkfs': 123.0
                                        },
                                        'AudioSourceName': 'string',
                                        'AudioType': 123,
                                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'CodecSettings': {
                                            'AacSettings': {
                                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                                'Bitrate': 123,
                                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                                'RateControlMode': 'CBR'|'VBR',
                                                'RawFormat': 'LATM_LOAS'|'NONE',
                                                'SampleRate': 123,
                                                'Specification': 'MPEG2'|'MPEG4',
                                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                            },
                                            'Ac3Settings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'SampleRate': 123
                                            },
                                            'AiffSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                            'Eac3AtmosSettings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN',
                                                'CodingMode': 'CODING_MODE_9_1_6',
                                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                                'SampleRate': 123,
                                                'SpeechThreshold': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Eac3Settings': {
                                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                                'DcFilter': 'ENABLED'|'DISABLED',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LfeControl': 'LFE'|'NO_LFE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                                'SampleRate': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Mp2Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Mp3Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'RateControlMode': 'CBR'|'VBR',
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'OpusSettings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'VorbisSettings': {
                                                'Channels': 123,
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'WavSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'Format': 'RIFF'|'RF64',
                                                'SampleRate': 123
                                            }
                                        },
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'RemixSettings': {
                                            'ChannelMapping': {
                                                'OutputChannels': [
                                                    {
                                                        'InputChannels': [
                                                            123,
                                                        ],
                                                        'InputChannelsFineTune': [
                                                            123.0,
                                                        ]
                                                    },
                                                ]
                                            },
                                            'ChannelsIn': 123,
                                            'ChannelsOut': 123
                                        },
                                        'StreamName': 'string'
                                    },
                                ],
                                'CaptionDescriptions': [
                                    {
                                        'CaptionSelectorName': 'string',
                                        'CustomLanguageCode': 'string',
                                        'DestinationSettings': {
                                            'BurninDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                            'DvbSubDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'EmbeddedDestinationSettings': {
                                                'Destination608ChannelNumber': 123,
                                                'Destination708ServiceNumber': 123
                                            },
                                            'ImscDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'SccDestinationSettings': {
                                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                            },
                                            'TeletextDestinationSettings': {
                                                'PageNumber': 'string',
                                                'PageTypes': [
                                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                                ]
                                            },
                                            'TtmlDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'WebvttDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            }
                                        },
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'ContainerSettings': {
                                    'CmfcSettings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioGroupId': 'string',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                    'F4vSettings': {
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                    },
                                    'M2tsSettings': {
                                        'AudioBufferModel': 'DVB'|'ATSC',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'Bitrate': 123,
                                        'BufferModel': 'MULTIPLEX'|'NONE',
                                        'DvbNitSettings': {
                                            'NetworkId': 123,
                                            'NetworkName': 'string',
                                            'NitInterval': 123
                                        },
                                        'DvbSdtSettings': {
                                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                            'SdtInterval': 123,
                                            'ServiceName': 'string',
                                            'ServiceProviderName': 'string'
                                        },
                                        'DvbSubPids': [
                                            123,
                                        ],
                                        'DvbTdtSettings': {
                                            'TdtInterval': 123
                                        },
                                        'DvbTeletextPid': 123,
                                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                        'FragmentTime': 123.0,
                                        'MaxPcrInterval': 123,
                                        'MinEbpInterval': 123,
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'NullPacketBitrate': 123.0,
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'RateMode': 'VBR'|'CBR',
                                        'Scte35Esam': {
                                            'Scte35EsamPid': 123
                                        },
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                        'SegmentationTime': 123.0,
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'M3u8Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'MovSettings': {
                                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                        'PaddingControl': 'OMNEON'|'NONE',
                                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                    },
                                    'Mp4Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'CttsVersion': 123,
                                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                        'Mp4MajorBrand': 'string'
                                    },
                                    'MpdSettings': {
                                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'MxfSettings': {
                                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                                    }
                                },
                                'Extension': 'string',
                                'NameModifier': 'string',
                                'OutputSettings': {
                                    'HlsSettings': {
                                        'AudioGroupId': 'string',
                                        'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'SegmentModifier': 'string'
                                    }
                                },
                                'Preset': 'string',
                                'VideoDescription': {
                                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                    'AntiAlias': 'DISABLED'|'ENABLED',
                                    'CodecSettings': {
                                        'Av1Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'MaxBitrate': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'QvbrSettings': {
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'QVBR',
                                            'Slices': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'AvcIntraSettings': {
                                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                            'AvcIntraUhdSettings': {
                                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                            },
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                        'FrameCaptureSettings': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'MaxCaptures': 123,
                                            'Quality': 123
                                        },
                                        'H264Settings': {
                                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'EntropyEncoding': 'CABAC'|'CAVLC',
                                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'RepeatPps': 'DISABLED'|'ENABLED',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'RP2027',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                        },
                                        'H265Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'TemporalIds': 'DISABLED'|'ENABLED',
                                            'Tiles': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                        },
                                        'Mpeg2Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                            'CodecProfile': 'MAIN'|'PROFILE_422',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                            'RateControlMode': 'VBR'|'CBR',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'D_10',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'ProresSettings': {
                                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Vc3Settings': {
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD',
                                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                        },
                                        'Vp8Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        },
                                        'Vp9Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        }
                                    },
                                    'ColorMetadata': 'IGNORE'|'INSERT',
                                    'Crop': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                    'FixedAfd': 123,
                                    'Height': 123,
                                    'Position': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                    'Sharpness': 123,
                                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                    'VideoPreprocessors': {
                                        'ColorCorrector': {
                                            'Brightness': 123,
                                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                            'Contrast': 123,
                                            'Hdr10Metadata': {
                                                'BluePrimaryX': 123,
                                                'BluePrimaryY': 123,
                                                'GreenPrimaryX': 123,
                                                'GreenPrimaryY': 123,
                                                'MaxContentLightLevel': 123,
                                                'MaxFrameAverageLightLevel': 123,
                                                'MaxLuminance': 123,
                                                'MinLuminance': 123,
                                                'RedPrimaryX': 123,
                                                'RedPrimaryY': 123,
                                                'WhitePointX': 123,
                                                'WhitePointY': 123
                                            },
                                            'Hue': 123,
                                            'Saturation': 123
                                        },
                                        'Deinterlacer': {
                                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                        },
                                        'DolbyVision': {
                                            'L6Metadata': {
                                                'MaxCll': 123,
                                                'MaxFall': 123
                                            },
                                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                            'Profile': 'PROFILE_5'
                                        },
                                        'ImageInserter': {
                                            'InsertableImages': [
                                                {
                                                    'Duration': 123,
                                                    'FadeIn': 123,
                                                    'FadeOut': 123,
                                                    'Height': 123,
                                                    'ImageInserterInput': 'string',
                                                    'ImageX': 123,
                                                    'ImageY': 123,
                                                    'Layer': 123,
                                                    'Opacity': 123,
                                                    'StartTime': 'string',
                                                    'Width': 123
                                                },
                                            ]
                                        },
                                        'NoiseReducer': {
                                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                            'FilterSettings': {
                                                'Strength': 123
                                            },
                                            'SpatialFilterSettings': {
                                                'PostFilterSharpenStrength': 123,
                                                'Speed': 123,
                                                'Strength': 123
                                            },
                                            'TemporalFilterSettings': {
                                                'AggressiveMode': 123,
                                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                                'Speed': 123,
                                                'Strength': 123
                                            }
                                        },
                                        'PartnerWatermarking': {
                                            'NexguardFileMarkerSettings': {
                                                'License': 'string',
                                                'Payload': 123,
                                                'Preset': 'string',
                                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                            }
                                        },
                                        'TimecodeBurnin': {
                                            'FontSize': 123,
                                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                            'Prefix': 'string'
                                        }
                                    },
                                    'Width': 123
                                }
                            },
                        ]
                    },
                ],
                'TimecodeConfig': {
                    'Anchor': 'string',
                    'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'Start': 'string',
                    'TimestampOffset': 'string'
                },
                'TimedMetadataInsertion': {
                    'Id3Insertions': [
                        {
                            'Id3': 'string',
                            'Timecode': 'string'
                        },
                    ]
                }
            },
            'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ],

}

Response Structure

  • (dict) --
    • JobTemplates (list) -- List of Job templates.
      • (dict) -- A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
        • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
          • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • Category (string) -- An optional category you create to organize your job templates.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for Job template creation.
        • Description (string) -- An optional description you create for each job template.
        • HopDestinations (list) -- Optional list of hop destinations.
          • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
            • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
            • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
            • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
        • LastUpdated (datetime) -- The timestamp in epoch seconds when the Job template was last updated.
        • Name (string) -- A name you create for each job template. Each name must be unique within your account.
        • Priority (integer) -- Relative priority on the job.
        • Queue (string) -- Optional. The queue that jobs created from this template are assigned to. If you don't specify this, jobs will go to the default queue.
        • Settings (dict) -- JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created from it.
          • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
          • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
            • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
          • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
            • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
              • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
            • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
            • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
              • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
          • Inputs (list) -- Use Inputs (inputs) to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
            • (dict) -- Specified video input in a template.
              • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                • (string) --
                  • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                    • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                      • (string) --
              • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                • (string) --
                  • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                    • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                    • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                    • LanguageCode (string) -- Selects a specific language code from within an audio source.
                    • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                    • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                      • (integer) --
                    • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                    • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • SelectorType (string) -- Specifies the type of the audio selector.
                    • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                      • (integer) --
              • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                • (string) --
                  • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                    • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                        • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                      • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                        • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                          • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                          • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                        • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                        • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                      • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                      • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                        • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                      • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                        • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
              • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
              • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
              • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
              • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
                • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                  • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                  • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
              • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
              • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
              • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
                • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
                • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
                • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
                • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
                • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
          • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
            • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
              • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
              • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
            • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
            • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
            • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
              • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
              • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
            • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
            • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
          • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
            • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
            • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
          • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
            • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
            • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
            • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
            • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
            • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
            • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
            • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
            • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
            • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
            • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
            • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
          • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
            • (dict) -- Group of outputs
              • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
                • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                  • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                  • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                  • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
              • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
              • Name (string) -- Name of the output group
              • OutputGroupSettings (dict) -- Output Group settings, including type
                • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                    • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                    • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                    • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                  • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                  • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
                • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
                • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                  • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                    • (string) --
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                  • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                  • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                    • (dict) -- Caption Language Mapping
                      • CaptionChannel (integer) -- Caption channel.
                      • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                      • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                      • LanguageDescription (string) -- Caption language description.
                  • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                    • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                    • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                  • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                  • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                  • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                  • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                  • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                  • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                  • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                  • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
                • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                  • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
                • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
              • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
                • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                  • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                    • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                      • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                        • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                      • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                        • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                        • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                        • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                        • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                        • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                        • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                      • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                      • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                      • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                      • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                        • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                          • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                          • CodecProfile (string) -- AAC Profile.
                          • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                          • RateControlMode (string) -- Rate Control Mode.
                          • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                          • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                          • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                          • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                        • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                        • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                          • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                          • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                          • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                          • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                        • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                          • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                          • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                          • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                          • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                          • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                        • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                          • SampleRate (integer) -- Sample rate in hz.
                          • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                        • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                          • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                        • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                          • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                          • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                          • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                        • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                          • SampleRate (integer) -- Sample rate in Hz.
                      • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                      • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                      • RemixSettings (dict) -- Advanced audio remixing settings.
                        • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                          • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                            • (dict) -- OutputChannel mapping settings.
                              • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                                • (integer) --
                              • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                                • (float) --
                        • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                        • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                    • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                      • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                      • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                        • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                        • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                          • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                          • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                          • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                        • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                          • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                        • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                          • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                          • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                            • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                        • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                          • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                        • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                          • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                      • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                      • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • ContainerSettings (dict) -- Container specific settings.
                    • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                      • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                      • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                    • F4vSettings (dict) -- Settings for F4v container
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                      • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                        • (integer) --
                      • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                      • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                      • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                        • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                        • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                        • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                        • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                        • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                        • (integer) --
                      • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                      • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                      • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                      • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                      • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                      • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                      • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                      • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                      • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                      • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                      • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                        • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                      • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                      • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                      • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                      • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                      • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                      • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                    • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                        • (integer) --
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                      • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                      • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                      • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                      • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                      • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                      • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                      • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                      • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                    • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                      • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                      • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                      • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                    • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                      • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                      • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                    • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                      • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • MxfSettings (dict) -- These settings relate to your MXF output container.
                      • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                      • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                  • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                  • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                  • OutputSettings (dict) -- Specific settings for this type of output.
                    • HlsSettings (dict) -- Settings for HLS output groups
                      • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                      • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                      • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                      • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                  • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                  • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                    • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                    • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                    • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                      • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                        • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                        • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                        • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                      • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                        • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                        • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                        • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                        • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                      • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                        • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                        • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                        • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                        • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • H265Settings (dict) -- Settings for H265 codec
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- H.265 Level.
                        • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                        • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                        • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                        • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                      • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                        • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                        • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                      • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                      • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                    • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                    • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                    • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                    • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                    • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                    • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                    • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                    • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                      • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                        • Brightness (integer) -- Brightness level.
                        • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                        • Contrast (integer) -- Contrast level.
                        • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                          • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                          • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                          • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • Hue (integer) -- Hue in degrees.
                        • Saturation (integer) -- Saturation level.
                      • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                        • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                        • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                        • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                      • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                        • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                          • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                          • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                        • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                        • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                      • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                          • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                            • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                            • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                            • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                            • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                            • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                            • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                            • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                            • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                            • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                            • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                            • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                      • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                        • FilterSettings (dict) -- Settings for a noise reducer filter
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                          • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                          • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                          • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                          • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                          • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                          • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                      • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                        • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                          • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                          • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                      • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                        • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                        • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                        • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                    • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
          • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
            • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
            • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
            • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
            • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
          • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
            • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
              • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
                • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
                • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
        • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
        • Type (string) -- A job template can be of two types: system or custom. System or built-in job templates can't be modified or deleted by the user.

class MediaConvert.Paginator.ListJobs
paginator = client.get_paginator('list_jobs')
paginate(**kwargs)

Creates an iterator that will paginate through responses from MediaConvert.Client.list_jobs().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    Order='ASCENDING'|'DESCENDING',
    Queue='string',
    Status='SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
  • Queue (string) -- Optional. Provide a queue name to get back only jobs from that queue.
  • Status (string) -- Optional. A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Jobs': [
        {
            'AccelerationSettings': {
                'Mode': 'DISABLED'|'ENABLED'|'PREFERRED'
            },
            'AccelerationStatus': 'NOT_APPLICABLE'|'IN_PROGRESS'|'ACCELERATED'|'NOT_ACCELERATED',
            'Arn': 'string',
            'BillingTagsSource': 'QUEUE'|'PRESET'|'JOB_TEMPLATE'|'JOB',
            'CreatedAt': datetime(2015, 1, 1),
            'CurrentPhase': 'PROBING'|'TRANSCODING'|'UPLOADING',
            'ErrorCode': 123,
            'ErrorMessage': 'string',
            'HopDestinations': [
                {
                    'Priority': 123,
                    'Queue': 'string',
                    'WaitMinutes': 123
                },
            ],
            'Id': 'string',
            'JobPercentComplete': 123,
            'JobTemplate': 'string',
            'Messages': {
                'Info': [
                    'string',
                ],
                'Warning': [
                    'string',
                ]
            },
            'OutputGroupDetails': [
                {
                    'OutputDetails': [
                        {
                            'DurationInMs': 123,
                            'VideoDetails': {
                                'HeightInPx': 123,
                                'WidthInPx': 123
                            }
                        },
                    ]
                },
            ],
            'Priority': 123,
            'Queue': 'string',
            'QueueTransitions': [
                {
                    'DestinationQueue': 'string',
                    'SourceQueue': 'string',
                    'Timestamp': datetime(2015, 1, 1)
                },
            ],
            'RetryCount': 123,
            'Role': 'string',
            'Settings': {
                'AdAvailOffset': 123,
                'AvailBlanking': {
                    'AvailBlankingImage': 'string'
                },
                'Esam': {
                    'ManifestConfirmConditionNotification': {
                        'MccXml': 'string'
                    },
                    'ResponseSignalPreroll': 123,
                    'SignalProcessingNotification': {
                        'SccXml': 'string'
                    }
                },
                'Inputs': [
                    {
                        'AudioSelectorGroups': {
                            'string': {
                                'AudioSelectorNames': [
                                    'string',
                                ]
                            }
                        },
                        'AudioSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'DefaultSelection': 'DEFAULT'|'NOT_DEFAULT',
                                'ExternalAudioFileInput': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'Offset': 123,
                                'Pids': [
                                    123,
                                ],
                                'ProgramSelection': 123,
                                'RemixSettings': {
                                    'ChannelMapping': {
                                        'OutputChannels': [
                                            {
                                                'InputChannels': [
                                                    123,
                                                ],
                                                'InputChannelsFineTune': [
                                                    123.0,
                                                ]
                                            },
                                        ]
                                    },
                                    'ChannelsIn': 123,
                                    'ChannelsOut': 123
                                },
                                'SelectorType': 'PID'|'TRACK'|'LANGUAGE_CODE',
                                'Tracks': [
                                    123,
                                ]
                            }
                        },
                        'CaptionSelectors': {
                            'string': {
                                'CustomLanguageCode': 'string',
                                'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                'SourceSettings': {
                                    'AncillarySourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'SourceAncillaryChannelNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'DvbSubSourceSettings': {
                                        'Pid': 123
                                    },
                                    'EmbeddedSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Source608ChannelNumber': 123,
                                        'Source608TrackNumber': 123,
                                        'TerminateCaptions': 'END_OF_INPUT'|'DISABLED'
                                    },
                                    'FileSourceSettings': {
                                        'Convert608To708': 'UPCONVERT'|'DISABLED',
                                        'Framerate': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123
                                        },
                                        'SourceFile': 'string',
                                        'TimeDelta': 123
                                    },
                                    'SourceType': 'ANCILLARY'|'DVB_SUB'|'EMBEDDED'|'SCTE20'|'SCC'|'TTML'|'STL'|'SRT'|'SMI'|'SMPTE_TT'|'TELETEXT'|'NULL_SOURCE'|'IMSC'|'WEBVTT',
                                    'TeletextSourceSettings': {
                                        'PageNumber': 'string'
                                    },
                                    'TrackSourceSettings': {
                                        'TrackNumber': 123
                                    }
                                }
                            }
                        },
                        'Crop': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'DeblockFilter': 'ENABLED'|'DISABLED',
                        'DecryptionSettings': {
                            'DecryptionMode': 'AES_CTR'|'AES_CBC'|'AES_GCM',
                            'EncryptedDecryptionKey': 'string',
                            'InitializationVector': 'string',
                            'KmsKeyRegion': 'string'
                        },
                        'DenoiseFilter': 'ENABLED'|'DISABLED',
                        'FileInput': 'string',
                        'FilterEnable': 'AUTO'|'DISABLE'|'FORCE',
                        'FilterStrength': 123,
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'InputClippings': [
                            {
                                'EndTimecode': 'string',
                                'StartTimecode': 'string'
                            },
                        ],
                        'InputScanType': 'AUTO'|'PSF',
                        'Position': {
                            'Height': 123,
                            'Width': 123,
                            'X': 123,
                            'Y': 123
                        },
                        'ProgramNumber': 123,
                        'PsiControl': 'IGNORE_PSI'|'USE_PSI',
                        'SupplementalImps': [
                            'string',
                        ],
                        'TimecodeSource': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                        'TimecodeStart': 'string',
                        'VideoSelector': {
                            'AlphaBehavior': 'DISCARD'|'REMAP_TO_LUMA',
                            'ColorSpace': 'FOLLOW'|'REC_601'|'REC_709'|'HDR10'|'HLG_2020',
                            'ColorSpaceUsage': 'FORCE'|'FALLBACK',
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Pid': 123,
                            'ProgramNumber': 123,
                            'Rotate': 'DEGREE_0'|'DEGREES_90'|'DEGREES_180'|'DEGREES_270'|'AUTO'
                        }
                    },
                ],
                'MotionImageInserter': {
                    'Framerate': {
                        'FramerateDenominator': 123,
                        'FramerateNumerator': 123
                    },
                    'Input': 'string',
                    'InsertionMode': 'MOV'|'PNG',
                    'Offset': {
                        'ImageX': 123,
                        'ImageY': 123
                    },
                    'Playback': 'ONCE'|'REPEAT',
                    'StartTime': 'string'
                },
                'NielsenConfiguration': {
                    'BreakoutCode': 123,
                    'DistributorId': 'string'
                },
                'NielsenNonLinearWatermark': {
                    'ActiveWatermarkProcess': 'NAES2_AND_NW'|'CBET'|'NAES2_AND_NW_AND_CBET',
                    'AdiFilename': 'string',
                    'AssetId': 'string',
                    'AssetName': 'string',
                    'CbetSourceId': 'string',
                    'EpisodeId': 'string',
                    'MetadataDestination': 'string',
                    'SourceId': 123,
                    'SourceWatermarkStatus': 'CLEAN'|'WATERMARKED',
                    'TicServerUrl': 'string',
                    'UniqueTicPerAudioTrack': 'RESERVE_UNIQUE_TICS_PER_TRACK'|'SAME_TICS_PER_TRACK'
                },
                'OutputGroups': [
                    {
                        'AutomatedEncodingSettings': {
                            'AbrSettings': {
                                'MaxAbrBitrate': 123,
                                'MaxRenditions': 123,
                                'MinAbrBitrate': 123
                            }
                        },
                        'CustomName': 'string',
                        'Name': 'string',
                        'OutputGroupSettings': {
                            'CmafGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'BaseUrl': 'string',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'SAMPLE_AES'|'AES_CTR',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'DashSignaledSystemIds': [
                                            'string',
                                        ],
                                        'HlsSignaledSystemIds': [
                                            'string',
                                        ],
                                        'ResourceId': 'string',
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'FragmentLength': 123,
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'WriteDashManifest': 'DISABLED'|'ENABLED',
                                'WriteHlsManifest': 'DISABLED'|'ENABLED',
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'DashIsoGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioChannelConfigSchemeIdUri': 'MPEG_CHANNEL_CONFIGURATION'|'DOLBY_CHANNEL_CONFIGURATION',
                                'BaseUrl': 'string',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'PlaybackDeviceCompatibility': 'CENC_V1'|'UNENCRYPTED_SEI',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'HbbtvCompliance': 'HBBTV_1_5'|'NONE',
                                'MinBufferTime': 123,
                                'MinFinalSegmentLength': 123.0,
                                'MpdProfile': 'MAIN_PROFILE'|'ON_DEMAND_PROFILE',
                                'PtsOffsetHandlingForBFrames': 'ZERO_BASED'|'MATCH_INITIAL_PTS',
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'WriteSegmentTimelineInRepresentation': 'ENABLED'|'DISABLED'
                            },
                            'FileGroupSettings': {
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                }
                            },
                            'HlsGroupSettings': {
                                'AdMarkers': [
                                    'ELEMENTAL'|'ELEMENTAL_SCTE35',
                                ],
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioOnlyHeader': 'INCLUDE'|'EXCLUDE',
                                'BaseUrl': 'string',
                                'CaptionLanguageMappings': [
                                    {
                                        'CaptionChannel': 123,
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'CaptionLanguageSetting': 'INSERT'|'OMIT'|'NONE',
                                'ClientCache': 'DISABLED'|'ENABLED',
                                'CodecSpecification': 'RFC_6381'|'RFC_4281',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'DirectoryStructure': 'SINGLE_DIRECTORY'|'SUBDIRECTORY_PER_STREAM',
                                'Encryption': {
                                    'ConstantInitializationVector': 'string',
                                    'EncryptionMethod': 'AES128'|'SAMPLE_AES',
                                    'InitializationVectorInManifest': 'INCLUDE'|'EXCLUDE',
                                    'OfflineEncrypted': 'ENABLED'|'DISABLED',
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    },
                                    'StaticKeyProvider': {
                                        'KeyFormat': 'string',
                                        'KeyFormatVersions': 'string',
                                        'StaticKeyValue': 'string',
                                        'Url': 'string'
                                    },
                                    'Type': 'SPEKE'|'STATIC_KEY'
                                },
                                'ManifestCompression': 'GZIP'|'NONE',
                                'ManifestDurationFormat': 'FLOATING_POINT'|'INTEGER',
                                'MinFinalSegmentLength': 123.0,
                                'MinSegmentLength': 123,
                                'OutputSelection': 'MANIFESTS_AND_SEGMENTS'|'SEGMENTS_ONLY',
                                'ProgramDateTime': 'INCLUDE'|'EXCLUDE',
                                'ProgramDateTimePeriod': 123,
                                'SegmentControl': 'SINGLE_FILE'|'SEGMENTED_FILES',
                                'SegmentLength': 123,
                                'SegmentsPerSubdirectory': 123,
                                'StreamInfResolution': 'INCLUDE'|'EXCLUDE',
                                'TimedMetadataId3Frame': 'NONE'|'PRIV'|'TDRL',
                                'TimedMetadataId3Period': 123,
                                'TimestampDeltaMilliseconds': 123
                            },
                            'MsSmoothGroupSettings': {
                                'AdditionalManifests': [
                                    {
                                        'ManifestNameModifier': 'string',
                                        'SelectedOutputs': [
                                            'string',
                                        ]
                                    },
                                ],
                                'AudioDeduplication': 'COMBINE_DUPLICATE_STREAMS'|'NONE',
                                'Destination': 'string',
                                'DestinationSettings': {
                                    'S3Settings': {
                                        'AccessControl': {
                                            'CannedAcl': 'PUBLIC_READ'|'AUTHENTICATED_READ'|'BUCKET_OWNER_READ'|'BUCKET_OWNER_FULL_CONTROL'
                                        },
                                        'Encryption': {
                                            'EncryptionType': 'SERVER_SIDE_ENCRYPTION_S3'|'SERVER_SIDE_ENCRYPTION_KMS',
                                            'KmsKeyArn': 'string'
                                        }
                                    }
                                },
                                'Encryption': {
                                    'SpekeKeyProvider': {
                                        'CertificateArn': 'string',
                                        'ResourceId': 'string',
                                        'SystemIds': [
                                            'string',
                                        ],
                                        'Url': 'string'
                                    }
                                },
                                'FragmentLength': 123,
                                'ManifestEncoding': 'UTF8'|'UTF16'
                            },
                            'Type': 'HLS_GROUP_SETTINGS'|'DASH_ISO_GROUP_SETTINGS'|'FILE_GROUP_SETTINGS'|'MS_SMOOTH_GROUP_SETTINGS'|'CMAF_GROUP_SETTINGS'
                        },
                        'Outputs': [
                            {
                                'AudioDescriptions': [
                                    {
                                        'AudioChannelTaggingSettings': {
                                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                                        },
                                        'AudioNormalizationSettings': {
                                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                                            'CorrectionGateLevel': 123,
                                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                                            'TargetLkfs': 123.0
                                        },
                                        'AudioSourceName': 'string',
                                        'AudioType': 123,
                                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'CodecSettings': {
                                            'AacSettings': {
                                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                                'Bitrate': 123,
                                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                                'RateControlMode': 'CBR'|'VBR',
                                                'RawFormat': 'LATM_LOAS'|'NONE',
                                                'SampleRate': 123,
                                                'Specification': 'MPEG2'|'MPEG4',
                                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                                            },
                                            'Ac3Settings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'SampleRate': 123
                                            },
                                            'AiffSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                                            'Eac3AtmosSettings': {
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN',
                                                'CodingMode': 'CODING_MODE_9_1_6',
                                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                                'SampleRate': 123,
                                                'SpeechThreshold': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Eac3Settings': {
                                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                                'Bitrate': 123,
                                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                                'DcFilter': 'ENABLED'|'DISABLED',
                                                'Dialnorm': 123,
                                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                                'LfeControl': 'LFE'|'NO_LFE',
                                                'LfeFilter': 'ENABLED'|'DISABLED',
                                                'LoRoCenterMixLevel': 123.0,
                                                'LoRoSurroundMixLevel': 123.0,
                                                'LtRtCenterMixLevel': 123.0,
                                                'LtRtSurroundMixLevel': 123.0,
                                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                                'SampleRate': 123,
                                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                                            },
                                            'Mp2Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'Mp3Settings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'RateControlMode': 'CBR'|'VBR',
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'OpusSettings': {
                                                'Bitrate': 123,
                                                'Channels': 123,
                                                'SampleRate': 123
                                            },
                                            'VorbisSettings': {
                                                'Channels': 123,
                                                'SampleRate': 123,
                                                'VbrQuality': 123
                                            },
                                            'WavSettings': {
                                                'BitDepth': 123,
                                                'Channels': 123,
                                                'Format': 'RIFF'|'RF64',
                                                'SampleRate': 123
                                            }
                                        },
                                        'CustomLanguageCode': 'string',
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                        'RemixSettings': {
                                            'ChannelMapping': {
                                                'OutputChannels': [
                                                    {
                                                        'InputChannels': [
                                                            123,
                                                        ],
                                                        'InputChannelsFineTune': [
                                                            123.0,
                                                        ]
                                                    },
                                                ]
                                            },
                                            'ChannelsIn': 123,
                                            'ChannelsOut': 123
                                        },
                                        'StreamName': 'string'
                                    },
                                ],
                                'CaptionDescriptions': [
                                    {
                                        'CaptionSelectorName': 'string',
                                        'CustomLanguageCode': 'string',
                                        'DestinationSettings': {
                                            'BurninDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                                            'DvbSubDestinationSettings': {
                                                'Alignment': 'CENTERED'|'LEFT',
                                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                                'BackgroundOpacity': 123,
                                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'FontOpacity': 123,
                                                'FontResolution': 123,
                                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                                'FontSize': 123,
                                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                                'OutlineSize': 123,
                                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                                'ShadowOpacity': 123,
                                                'ShadowXOffset': 123,
                                                'ShadowYOffset': 123,
                                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                                'XPosition': 123,
                                                'YPosition': 123
                                            },
                                            'EmbeddedDestinationSettings': {
                                                'Destination608ChannelNumber': 123,
                                                'Destination708ServiceNumber': 123
                                            },
                                            'ImscDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'SccDestinationSettings': {
                                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                                            },
                                            'TeletextDestinationSettings': {
                                                'PageNumber': 'string',
                                                'PageTypes': [
                                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                                ]
                                            },
                                            'TtmlDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            },
                                            'WebvttDestinationSettings': {
                                                'StylePassthrough': 'ENABLED'|'DISABLED'
                                            }
                                        },
                                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                                        'LanguageDescription': 'string'
                                    },
                                ],
                                'ContainerSettings': {
                                    'CmfcSettings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioGroupId': 'string',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                                    'F4vSettings': {
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                                    },
                                    'M2tsSettings': {
                                        'AudioBufferModel': 'DVB'|'ATSC',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'Bitrate': 123,
                                        'BufferModel': 'MULTIPLEX'|'NONE',
                                        'DvbNitSettings': {
                                            'NetworkId': 123,
                                            'NetworkName': 'string',
                                            'NitInterval': 123
                                        },
                                        'DvbSdtSettings': {
                                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                                            'SdtInterval': 123,
                                            'ServiceName': 'string',
                                            'ServiceProviderName': 'string'
                                        },
                                        'DvbSubPids': [
                                            123,
                                        ],
                                        'DvbTdtSettings': {
                                            'TdtInterval': 123
                                        },
                                        'DvbTeletextPid': 123,
                                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                                        'FragmentTime': 123.0,
                                        'MaxPcrInterval': 123,
                                        'MinEbpInterval': 123,
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'NullPacketBitrate': 123.0,
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'RateMode': 'VBR'|'CBR',
                                        'Scte35Esam': {
                                            'Scte35EsamPid': 123
                                        },
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                                        'SegmentationTime': 123.0,
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'M3u8Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'AudioFramesPerPes': 123,
                                        'AudioPids': [
                                            123,
                                        ],
                                        'NielsenId3': 'INSERT'|'NONE',
                                        'PatInterval': 123,
                                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                                        'PcrPid': 123,
                                        'PmtInterval': 123,
                                        'PmtPid': 123,
                                        'PrivateMetadataPid': 123,
                                        'ProgramNumber': 123,
                                        'Scte35Pid': 123,
                                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                                        'TimedMetadataPid': 123,
                                        'TransportStreamId': 123,
                                        'VideoPid': 123
                                    },
                                    'MovSettings': {
                                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                                        'PaddingControl': 'OMNEON'|'NONE',
                                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                                    },
                                    'Mp4Settings': {
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                                        'CttsVersion': 123,
                                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                                        'Mp4MajorBrand': 'string'
                                    },
                                    'MpdSettings': {
                                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                                        'Scte35Esam': 'INSERT'|'NONE',
                                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                                    },
                                    'MxfSettings': {
                                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                                    }
                                },
                                'Extension': 'string',
                                'NameModifier': 'string',
                                'OutputSettings': {
                                    'HlsSettings': {
                                        'AudioGroupId': 'string',
                                        'AudioOnlyContainer': 'AUTOMATIC'|'M2TS',
                                        'AudioRenditionSets': 'string',
                                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT'|'AUDIO_ONLY_VARIANT_STREAM',
                                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                                        'SegmentModifier': 'string'
                                    }
                                },
                                'Preset': 'string',
                                'VideoDescription': {
                                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                                    'AntiAlias': 'DISABLED'|'ENABLED',
                                    'CodecSettings': {
                                        'Av1Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'MaxBitrate': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'QvbrSettings': {
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'QVBR',
                                            'Slices': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'AvcIntraSettings': {
                                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                                            'AvcIntraUhdSettings': {
                                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                                            },
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                                        'FrameCaptureSettings': {
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'MaxCaptures': 123,
                                            'Quality': 123
                                        },
                                        'H264Settings': {
                                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'EntropyEncoding': 'CABAC'|'CAVLC',
                                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'RepeatPps': 'DISABLED'|'ENABLED',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'RP2027',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                                        },
                                        'H265Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopBReference': 'DISABLED'|'ENABLED',
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'NumberReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                                            'QvbrSettings': {
                                                'MaxAverageBitrate': 123,
                                                'QvbrQualityLevel': 123,
                                                'QvbrQualityLevelFineTune': 123.0
                                            },
                                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                                            'Slices': 123,
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'TemporalIds': 'DISABLED'|'ENABLED',
                                            'Tiles': 'DISABLED'|'ENABLED',
                                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                                        },
                                        'Mpeg2Settings': {
                                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                                            'Bitrate': 123,
                                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                                            'CodecProfile': 'MAIN'|'PROFILE_422',
                                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopClosedCadence': 123,
                                            'GopSize': 123.0,
                                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                                            'HrdBufferInitialFillPercentage': 123,
                                            'HrdBufferSize': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                                            'MaxBitrate': 123,
                                            'MinIInterval': 123,
                                            'NumberBFramesBetweenReferenceFrames': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                                            'RateControlMode': 'VBR'|'CBR',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Softness': 123,
                                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                                            'Syntax': 'DEFAULT'|'D_10',
                                            'Telecine': 'NONE'|'SOFT'|'HARD',
                                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                                        },
                                        'ProresSettings': {
                                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD'
                                        },
                                        'Vc3Settings': {
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                                            'SlowPal': 'DISABLED'|'ENABLED',
                                            'Telecine': 'NONE'|'HARD',
                                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                                        },
                                        'Vp8Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        },
                                        'Vp9Settings': {
                                            'Bitrate': 123,
                                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                                            'FramerateDenominator': 123,
                                            'FramerateNumerator': 123,
                                            'GopSize': 123.0,
                                            'HrdBufferSize': 123,
                                            'MaxBitrate': 123,
                                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                                            'ParDenominator': 123,
                                            'ParNumerator': 123,
                                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                                            'RateControlMode': 'VBR'
                                        }
                                    },
                                    'ColorMetadata': 'IGNORE'|'INSERT',
                                    'Crop': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                                    'FixedAfd': 123,
                                    'Height': 123,
                                    'Position': {
                                        'Height': 123,
                                        'Width': 123,
                                        'X': 123,
                                        'Y': 123
                                    },
                                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                                    'Sharpness': 123,
                                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                                    'VideoPreprocessors': {
                                        'ColorCorrector': {
                                            'Brightness': 123,
                                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                                            'Contrast': 123,
                                            'Hdr10Metadata': {
                                                'BluePrimaryX': 123,
                                                'BluePrimaryY': 123,
                                                'GreenPrimaryX': 123,
                                                'GreenPrimaryY': 123,
                                                'MaxContentLightLevel': 123,
                                                'MaxFrameAverageLightLevel': 123,
                                                'MaxLuminance': 123,
                                                'MinLuminance': 123,
                                                'RedPrimaryX': 123,
                                                'RedPrimaryY': 123,
                                                'WhitePointX': 123,
                                                'WhitePointY': 123
                                            },
                                            'Hue': 123,
                                            'Saturation': 123
                                        },
                                        'Deinterlacer': {
                                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                                        },
                                        'DolbyVision': {
                                            'L6Metadata': {
                                                'MaxCll': 123,
                                                'MaxFall': 123
                                            },
                                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                                            'Profile': 'PROFILE_5'
                                        },
                                        'ImageInserter': {
                                            'InsertableImages': [
                                                {
                                                    'Duration': 123,
                                                    'FadeIn': 123,
                                                    'FadeOut': 123,
                                                    'Height': 123,
                                                    'ImageInserterInput': 'string',
                                                    'ImageX': 123,
                                                    'ImageY': 123,
                                                    'Layer': 123,
                                                    'Opacity': 123,
                                                    'StartTime': 'string',
                                                    'Width': 123
                                                },
                                            ]
                                        },
                                        'NoiseReducer': {
                                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                                            'FilterSettings': {
                                                'Strength': 123
                                            },
                                            'SpatialFilterSettings': {
                                                'PostFilterSharpenStrength': 123,
                                                'Speed': 123,
                                                'Strength': 123
                                            },
                                            'TemporalFilterSettings': {
                                                'AggressiveMode': 123,
                                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                                'Speed': 123,
                                                'Strength': 123
                                            }
                                        },
                                        'PartnerWatermarking': {
                                            'NexguardFileMarkerSettings': {
                                                'License': 'string',
                                                'Payload': 123,
                                                'Preset': 'string',
                                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                                            }
                                        },
                                        'TimecodeBurnin': {
                                            'FontSize': 123,
                                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                                            'Prefix': 'string'
                                        }
                                    },
                                    'Width': 123
                                }
                            },
                        ]
                    },
                ],
                'TimecodeConfig': {
                    'Anchor': 'string',
                    'Source': 'EMBEDDED'|'ZEROBASED'|'SPECIFIEDSTART',
                    'Start': 'string',
                    'TimestampOffset': 'string'
                },
                'TimedMetadataInsertion': {
                    'Id3Insertions': [
                        {
                            'Id3': 'string',
                            'Timecode': 'string'
                        },
                    ]
                }
            },
            'SimulateReservedQueue': 'DISABLED'|'ENABLED',
            'Status': 'SUBMITTED'|'PROGRESSING'|'COMPLETE'|'CANCELED'|'ERROR',
            'StatusUpdateInterval': 'SECONDS_10'|'SECONDS_12'|'SECONDS_15'|'SECONDS_20'|'SECONDS_30'|'SECONDS_60'|'SECONDS_120'|'SECONDS_180'|'SECONDS_240'|'SECONDS_300'|'SECONDS_360'|'SECONDS_420'|'SECONDS_480'|'SECONDS_540'|'SECONDS_600',
            'Timing': {
                'FinishTime': datetime(2015, 1, 1),
                'StartTime': datetime(2015, 1, 1),
                'SubmitTime': datetime(2015, 1, 1)
            },
            'UserMetadata': {
                'string': 'string'
            }
        },
    ],

}

Response Structure

  • (dict) --
    • Jobs (list) -- List of jobs
      • (dict) -- Each job converts an input file into an output file or files. For more information, see the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
        • AccelerationSettings (dict) -- Accelerated transcoding can significantly speed up jobs with long, visually complex content.
          • Mode (string) -- Specify the conditions when the service will run your job with accelerated transcoding.
        • AccelerationStatus (string) -- Describes whether the current job is running with accelerated transcoding. For jobs that have Acceleration (AccelerationMode) set to DISABLED, AccelerationStatus is always NOT_APPLICABLE. For jobs that have Acceleration (AccelerationMode) set to ENABLED or PREFERRED, AccelerationStatus is one of the other states. AccelerationStatus is IN_PROGRESS initially, while the service determines whether the input files and job settings are compatible with accelerated transcoding. If they are, AcclerationStatus is ACCELERATED. If your input files and job settings aren't compatible with accelerated transcoding, the service either fails your job or runs it without accelerated transcoding, depending on how you set Acceleration (AccelerationMode). When the service runs your job without accelerated transcoding, AccelerationStatus is NOT_ACCELERATED.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • BillingTagsSource (string) -- The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any billing report that you set up.
        • CreatedAt (datetime) -- The time, in Unix epoch format in seconds, when the job got created.
        • CurrentPhase (string) -- A job's phase can be PROBING, TRANSCODING OR UPLOADING
        • ErrorCode (integer) -- Error code for the job
        • ErrorMessage (string) -- Error message of Job
        • HopDestinations (list) -- Optional list of hop destinations.
          • (dict) -- Optional. Configuration for a destination queue to which the job can hop once a customer-defined minimum wait time has passed.
            • Priority (integer) -- Optional. When you set up a job to use queue hopping, you can specify a different relative priority for the job in the destination queue. If you don't specify, the relative priority will remain the same as in the previous queue.
            • Queue (string) -- Optional unless the job is submitted on the default queue. When you set up a job to use queue hopping, you can specify a destination queue. This queue cannot be the original queue to which the job is submitted. If the original queue isn't the default queue and you don't specify the destination queue, the job will move to the default queue.
            • WaitMinutes (integer) -- Required for setting up a job to use queue hopping. Minimum wait time in minutes until the job can hop to the destination queue. Valid range is 1 to 1440 minutes, inclusive.
        • Id (string) -- A portion of the job's ARN, unique within your AWS Elemental MediaConvert resources
        • JobPercentComplete (integer) -- An estimate of how far your job has progressed. This estimate is shown as a percentage of the total time from when your job leaves its queue to when your output files appear in your output Amazon S3 bucket. AWS Elemental MediaConvert provides jobPercentComplete in CloudWatch STATUS_UPDATE events and in the response to GetJob and ListJobs requests. The jobPercentComplete estimate is reliable for the following input containers: Quicktime, Transport Stream, MP4, and MXF. For some jobs, the service can't provide information about job progress. In those cases, jobPercentComplete returns a null value.
        • JobTemplate (string) -- The job template that the job is created from, if it is created from a job template.
        • Messages (dict) -- Provides messages from the service about jobs that you have already successfully submitted.
          • Info (list) -- List of messages that are informational only and don't indicate a problem with your job.
            • (string) --
          • Warning (list) -- List of messages that warn about conditions that might cause your job not to run or to fail.
            • (string) --
        • OutputGroupDetails (list) -- List of output group details
          • (dict) -- Contains details about the output groups specified in the job settings.
            • OutputDetails (list) -- Details about the output
              • (dict) -- Details regarding output
                • DurationInMs (integer) -- Duration in milliseconds
                • VideoDetails (dict) -- Contains details about the output's video stream
                  • HeightInPx (integer) -- Height in pixels for the output
                  • WidthInPx (integer) -- Width in pixels for the output
        • Priority (integer) -- Relative priority on the job.
        • Queue (string) -- When you create a job, you can specify a queue to send it to. If you don't specify, the job will go to the default queue. For more about queues, see the User Guide topic at https://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html
        • QueueTransitions (list) -- The job's queue hopping history.
          • (dict) -- Description of the source and destination queues between which the job has moved, along with the timestamp of the move
            • DestinationQueue (string) -- The queue that the job was on after the transition.
            • SourceQueue (string) -- The queue that the job was on before the transition.
            • Timestamp (datetime) -- The time, in Unix epoch format, that the job moved from the source queue to the destination queue.
        • RetryCount (integer) -- The number of times that the service automatically attempted to process your job after encountering an error.
        • Role (string) -- The IAM role you use for creating this job. For details about permissions, see the User Guide topic at the User Guide at https://docs.aws.amazon.com/mediaconvert/latest/ug/iam-role.html
        • Settings (dict) -- JobSettings contains all the transcode settings for a job.
          • AdAvailOffset (integer) -- When specified, this offset (in milliseconds) is added to the input Ad Avail PTS time.
          • AvailBlanking (dict) -- Settings for ad avail blanking. Video can be blanked or overlaid with an image, and audio muted during SCTE-35 triggered ad avails.
            • AvailBlankingImage (string) -- Blanking image to be used. Leave empty for solid black. Only bmp and png images are supported.
          • Esam (dict) -- Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
            • ManifestConfirmConditionNotification (dict) -- Specifies an ESAM ManifestConfirmConditionNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the manifest conditioning instructions that you provide in the setting MCC XML (mccXml).
              • MccXml (string) -- Provide your ESAM ManifestConfirmConditionNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the Manifest Conditioning instructions in the message that you supply.
            • ResponseSignalPreroll (integer) -- Specifies the stream distance, in milliseconds, between the SCTE 35 messages that the transcoder places and the splice points that they refer to. If the time between the start of the asset and the SCTE-35 message is less than this value, then the transcoder places the SCTE-35 marker at the beginning of the stream.
            • SignalProcessingNotification (dict) -- Specifies an ESAM SignalProcessingNotification XML as per OC-SP-ESAM-API-I03-131025. The transcoder uses the signal processing instructions that you provide in the setting SCC XML (sccXml).
              • SccXml (string) -- Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. Form the XML document as per OC-SP-ESAM-API-I03-131025. The transcoder will use the signal processing instructions in the message that you supply. Provide your ESAM SignalProcessingNotification XML document inside your JSON job settings. For your MPEG2-TS file outputs, if you want the service to place SCTE-35 markers at the insertion points you specify in the XML document, you must also enable SCTE-35 ESAM (scte35Esam). Note that you can either specify an ESAM XML document or enable SCTE-35 passthrough. You can't do both.
          • Inputs (list) -- Use Inputs (inputs) to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
            • (dict) -- Use inputs to define the source files used in your transcoding job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/specify-input-settings.html. You can use multiple video inputs to do input stitching. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html
              • AudioSelectorGroups (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                • (string) --
                  • (dict) -- Use audio selector groups to combine multiple sidecar audio inputs so that you can assign them to a single output audio tab (AudioDescription). Note that, if you're working with embedded audio, it's simpler to assign multiple input tracks into a single audio selector rather than use an audio selector group.
                    • AudioSelectorNames (list) -- Name of an Audio Selector within the same input to include in the group. Audio selector names are standardized, based on their order within the input (e.g., "Audio Selector 1"). The audio selector name parameter can be repeated to add any number of audio selectors to the group.
                      • (string) --
              • AudioSelectors (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                • (string) --
                  • (dict) -- Use Audio selectors (AudioSelectors) to specify a track or set of tracks from the input that you will use in your outputs. You can use multiple Audio selectors per input.
                    • CustomLanguageCode (string) -- Selects a specific language code from within an audio source, using the ISO 639-2 or ISO 639-3 three-letter language code
                    • DefaultSelection (string) -- Enable this setting on one audio selector to set it as the default for the job. The service uses this default for outputs where it can't find the specified input audio. If you don't set a default, those outputs have no audio.
                    • ExternalAudioFileInput (string) -- Specifies audio data from an external file source.
                    • LanguageCode (string) -- Selects a specific language code from within an audio source.
                    • Offset (integer) -- Specifies a time delta in milliseconds to offset the audio from the input video.
                    • Pids (list) -- Selects a specific PID from within an audio source (e.g. 257 selects PID 0x101).
                      • (integer) --
                    • ProgramSelection (integer) -- Use this setting for input streams that contain Dolby E, to have the service extract specific program data from the track. To select multiple programs, create multiple selectors with the same Track and different Program numbers. In the console, this setting is visible when you set Selector type to Track. Choose the program number from the dropdown list. If you are sending a JSON file, provide the program ID, which is part of the audio metadata. If your input file has incorrect metadata, you can choose All channels instead of a program number to have the service ignore the program IDs and include all the programs in the track.
                    • RemixSettings (dict) -- Use these settings to reorder the audio channels of one input to match those of another input. This allows you to combine the two files into a single output, one after the other.
                      • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                        • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                          • (dict) -- OutputChannel mapping settings.
                            • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                              • (integer) --
                            • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                              • (float) --
                      • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                    • SelectorType (string) -- Specifies the type of the audio selector.
                    • Tracks (list) -- Identify a track from the input audio to include in this selector by entering the track index number. To include several tracks in a single audio selector, specify multiple tracks as follows. Using the console, enter a comma-separated list. For examle, type "1,2,3" to include tracks 1 through 3. Specifying directly in your JSON job file, provide the track numbers in an array. For example, "tracks": [1,2,3].
                      • (integer) --
              • CaptionSelectors (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                • (string) --
                  • (dict) -- Use captions selectors to specify the captions data from your input that you use in your outputs. You can use up to 20 captions selectors per input.
                    • CustomLanguageCode (string) -- The specific language to extract from source, using the ISO 639-2 or ISO 639-3 three-letter language code. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • LanguageCode (string) -- The specific language to extract from source. If input is SCTE-27, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub and output is Burn-in or SMPTE-TT, complete this field and/or PID to select the caption language to extract. If input is DVB-Sub that is being passed through, omit this field (and PID field); there is no way to extract a specific language with pass-through captions.
                    • SourceSettings (dict) -- If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions source file. If your input captions are IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                      • AncillarySourceSettings (dict) -- Settings for ancillary captions source.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • SourceAncillaryChannelNumber (integer) -- Specifies the 608 channel number in the ancillary data track from which to extract captions. Unused for passthrough.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • DvbSubSourceSettings (dict) -- DVB Sub Source Settings
                        • Pid (integer) -- When using DVB-Sub with Burn-In or SMPTE-TT, use this PID for the source content. Unused for DVB-Sub passthrough. All DVB-Sub content is passed through, regardless of selectors.
                      • EmbeddedSourceSettings (dict) -- Settings for embedded captions Source
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Source608ChannelNumber (integer) -- Specifies the 608/708 channel number within the video track from which to extract captions. Unused for passthrough.
                        • Source608TrackNumber (integer) -- Specifies the video track index used for extracting captions. The system only supports one input video track, so this should always be set to '1'.
                        • TerminateCaptions (string) -- By default, the service terminates any unterminated captions at the end of each input. If you want the caption to continue onto your next input, disable this setting.
                      • FileSourceSettings (dict) -- If your input captions are SCC, SMI, SRT, STL, TTML, WebVTT, or IMSC 1.1 in an xml file, specify the URI of the input caption source file. If your caption source is IMSC in an IMF package, use TrackSourceSettings instead of FileSoureSettings.
                        • Convert608To708 (string) -- Specify whether this set of input captions appears in your outputs in both 608 and 708 format. If you choose Upconvert (UPCONVERT), MediaConvert includes the captions data in two ways: it passes the 608 data through using the 608 compatibility bytes fields of the 708 wrapper, and it also translates the 608 data into 708.
                        • Framerate (dict) -- Ignore this setting unless your input captions format is SCC. To have the service compensate for differing frame rates between your input captions and input video, specify the frame rate of the captions file. Specify this value as a fraction, using the settings Framerate numerator (framerateNumerator) and Framerate denominator (framerateDenominator). For example, you might specify 24 / 1 for 24 fps, 25 / 1 for 25 fps, 24000 / 1001 for 23.976 fps, or 30000 / 1001 for 29.97 fps.
                          • FramerateDenominator (integer) -- Specify the denominator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate numerator (framerateNumerator).
                          • FramerateNumerator (integer) -- Specify the numerator of the fraction that represents the frame rate for the setting Caption source frame rate (CaptionSourceFramerate). Use this setting along with the setting Framerate denominator (framerateDenominator).
                        • SourceFile (string) -- External caption file used for loading captions. Accepted file extensions are 'scc', 'ttml', 'dfxp', 'stl', 'srt', 'xml', 'smi', and 'vtt'.
                        • TimeDelta (integer) -- Specifies a time delta in seconds to offset the captions from the source file.
                      • SourceType (string) -- Use Source (SourceType) to identify the format of your input captions. The service cannot auto-detect caption format.
                      • TeletextSourceSettings (dict) -- Settings specific to Teletext caption sources, including Page number.
                        • PageNumber (string) -- Use Page Number (PageNumber) to specify the three-digit hexadecimal page number that will be used for Teletext captions. Do not use this setting if you are passing through teletext from the input source to output.
                      • TrackSourceSettings (dict) -- Settings specific to caption sources that are specified by track number. Currently, this is only IMSC captions in an IMF package. If your caption source is IMSC 1.1 in a separate xml file, use FileSourceSettings instead of TrackSourceSettings.
                        • TrackNumber (integer) -- Use this setting to select a single captions track from a source. Track numbers correspond to the order in the captions source file. For IMF sources, track numbering is based on the order that the captions appear in the CPL. For example, use 1 to select the captions asset that is listed first in the CPL. To include more than one captions track in your job outputs, create multiple input captions selectors. Specify one track per selector.
              • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame. If you specify a value here, it will override any value that you specify in the output setting Cropping selection (crop).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • DeblockFilter (string) -- Enable Deblock (InputDeblockFilter) to produce smoother motion in the output. Default is disabled. Only manually controllable for MPEG2 and uncompressed video inputs.
              • DecryptionSettings (dict) -- Settings for decrypting any input files that you encrypt before you upload them to Amazon S3. MediaConvert can decrypt files only when you use AWS Key Management Service (KMS) to encrypt the data key that you use to encrypt your content.
                • DecryptionMode (string) -- Specify the encryption mode that you used to encrypt your input files.
                • EncryptedDecryptionKey (string) -- Warning! Don't provide your encryption key in plaintext. Your job settings could be intercepted, making your encrypted content vulnerable. Specify the encrypted version of the data key that you used to encrypt your content. The data key must be encrypted by AWS Key Management Service (KMS). The key can be 128, 192, or 256 bits.
                • InitializationVector (string) -- Specify the initialization vector that you used when you encrypted your content before uploading it to Amazon S3. You can use a 16-byte initialization vector with any encryption mode. Or, you can use a 12-byte initialization vector with GCM or CTR. MediaConvert accepts only initialization vectors that are base64-encoded.
                • KmsKeyRegion (string) -- Specify the AWS Region for AWS Key Management Service (KMS) that you used to encrypt your data key, if that Region is different from the one you are using for AWS Elemental MediaConvert.
              • DenoiseFilter (string) -- Enable Denoise (InputDenoiseFilter) to filter noise from the input. Default is disabled. Only applicable to MPEG2, H.264, H.265, and uncompressed video inputs.
              • FileInput (string) -- Specify the source file for your transcoding job. You can use multiple inputs in a single job. The service concatenates these inputs, in the order that you specify them in the job, to create the outputs. If your input format is IMF, specify your input by providing the path to your CPL. For example, "s3://bucket/vf/cpl.xml". If the CPL is in an incomplete IMP, make sure to use Supplemental IMPs (SupplementalImps) to specify any supplemental IMPs that contain assets referenced by the CPL.
              • FilterEnable (string) -- Specify how the transcoding service applies the denoise and deblock filters. You must also enable the filters separately, with Denoise (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The transcoding service determines whether to apply filtering, depending on input type and quality. * Disable - The input is not filtered. This is true even if you use the API to enable them in (InputDeblockFilter) and (InputDeblockFilter). * Force - The input is filtered regardless of input type.
              • FilterStrength (integer) -- Use Filter strength (FilterStrength) to adjust the magnitude the input filter settings (Deblock and Denoise). The range is -5 to 5. Default is 0.
              • ImageInserter (dict) -- Enable the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • InputClippings (list) -- (InputClippings) contains sets of start and end times that together specify a portion of the input to be used in the outputs. If you provide only a start time, the clip will be the entire input from that point to the end. If you provide only an end time, it will be the entire input up to that point. When you specify more than one input clip, the transcoding service creates the job outputs by stringing the clips together in the order you specify them.
                • (dict) -- To transcode only portions of your input, include one input clip for each part of your input that you want in your output. All input clips that you specify will be included in every output of the job. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/assembling-multiple-inputs-and-input-clips.html.
                  • EndTimecode (string) -- Set End timecode (EndTimecode) to the end of the portion of the input you are clipping. The frame corresponding to the End timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for timecode source under input settings (InputTimecodeSource). For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to end six minutes into the video, use 01:06:00:00.
                  • StartTimecode (string) -- Set Start timecode (StartTimecode) to the beginning of the portion of the input you are clipping. The frame corresponding to the Start timecode value is included in the clip. Start timecode or End timecode may be left blank, but not both. Use the format HH:MM:SS:FF or HH:MM:SS;FF, where HH is the hour, MM is the minute, SS is the second, and FF is the frame number. When choosing this value, take into account your setting for Input timecode source. For example, if you have embedded timecodes that start at 01:00:00:00 and you want your clip to begin five minutes into the video, use 01:05:00:00.
              • InputScanType (string) -- When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF. MediaConvert doesn't automatically detect PsF. Therefore, flagging your input as PsF results in better preservation of video quality when you do deinterlacing and frame rate conversion. If you don't specify, the default value is Auto (AUTO). Auto is the correct setting for all inputs that are not PsF. Don't set this value to PsF when your input is interlaced. Doing so creates horizontal interlacing artifacts.
              • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black. If you specify a value here, it will override any value that you specify in the output setting Selection placement (position). If you specify a value here, this will override any AFD values in your input, even if you set Respond to AFD (RespondToAfd) to Respond (RESPOND). If you specify a value here, this will ignore anything that you specify for the setting Scaling Behavior (scalingBehavior).
                • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
              • ProgramNumber (integer) -- Use Program (programNumber) to select a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported. Default is the first program within the transport stream. If the program you specify doesn't exist, the transcoding service will use this default.
              • PsiControl (string) -- Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans. * Ignore PSI - Scan all PIDs for audio and video. * Use PSI - Scan only PSI data.
              • SupplementalImps (list) -- Provide a list of any necessary supplemental IMPs. You need supplemental IMPs if the CPL that you're using for your input is in an incomplete IMP. Specify either the supplemental IMP directories with a trailing slash or the ASSETMAP.xml files. For example ["s3://bucket/ov/", "s3://bucket/vf2/ASSETMAP.xml"]. You don't need to specify the IMP that contains your input CPL, because the service automatically detects it.
                • (string) --
              • TimecodeSource (string) -- Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service counts input video frames. This input frame count affects only the behavior of features that apply to a single input at a time, such as input clipping and synchronizing some captions formats. Choose Embedded (EMBEDDED) to use the timecodes in your input video. Choose Start at zero (ZEROBASED) to start the first frame at zero. Choose Specified start (SPECIFIEDSTART) to start the first frame at the timecode that you specify in the setting Start timecode (timecodeStart). If you don't specify a value for Timecode source, the service will use Embedded by default. For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • TimecodeStart (string) -- Specify the timecode that you want the service to use for this input's initial frame. To use this setting, you must set the Timecode source setting, located under the input settings (InputTimecodeSource), to Specified start (SPECIFIEDSTART). For more information about timecodes, see https://docs.aws.amazon.com/console/mediaconvert/timecode.
              • VideoSelector (dict) -- Input video selectors contain the video settings for the input. Each of your inputs can have up to one video selector.
                • AlphaBehavior (string) -- Ignore this setting unless this input is a QuickTime animation with an alpha channel. Use this setting to create separate Key and Fill outputs. In each output, specify which part of the input MediaConvert uses. Leave this setting at the default value DISCARD to delete the alpha channel and preserve the video. Set it to REMAP_TO_LUMA to delete the video and map the alpha channel to the luma channel of your outputs.
                • ColorSpace (string) -- If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the default value Follow (FOLLOW). The service will automatically detect your input color space. If your input video has metadata indicating the wrong color space, specify the accurate color space here. If your input video is HDR 10 and the SMPTE ST 2086 Mastering Display Color Volume static metadata isn't present in your video stream, or if that metadata is present but not accurate, choose Force HDR 10 (FORCE_HDR10) here and specify correct values in the input HDR 10 metadata (Hdr10Metadata) settings. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                • ColorSpaceUsage (string) -- There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR master display information settings(Hdr10Metadata). The Color space usage setting determines which takes precedence. Choose Force (FORCE) to use color metadata from the input job settings. If you don't specify values for those settings, the service defaults to using metadata from your input. FALLBACK - Choose Fallback (FALLBACK) to use color metadata from the source when it is present. If there's no color metadata in your input file, the service defaults to using values you specify in the input settings.
                • Hdr10Metadata (dict) -- Use these settings to provide HDR 10 metadata that is missing or inaccurate in your input video. Appropriate values vary depending on the input video and must be provided by a color grader. The color grader generates these values during the HDR 10 mastering process. The valid range for each of these settings is 0 to 50,000. Each increment represents 0.00002 in CIE1931 color coordinate. Related settings - When you specify these values, you must also set Color space (ColorSpace) to HDR 10 (HDR10). To specify whether the the values you specify here take precedence over the values in the metadata of your input file, set Color space usage (ColorSpaceUsage). To specify whether color metadata is included in an output, set Color metadata (ColorMetadata). For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Pid (integer) -- Use PID (Pid) to select specific video data from an input file. Specify this value as an integer; the system automatically converts it to the hexidecimal value. For example, 257 selects PID 0x101. A PID, or packet identifier, is an identifier for a set of data in an MPEG-2 transport stream container.
                • ProgramNumber (integer) -- Selects a specific program from within a multi-program transport stream. Note that Quad 4K is not currently supported.
                • Rotate (string) -- Use Rotate (InputRotate) to specify how the service rotates your video. You can choose automatic rotation or specify a rotation. You can specify a clockwise rotation of 0, 90, 180, or 270 degrees. If your input video container is .mov or .mp4 and your input has rotation metadata, you can choose Automatic to have the service rotate your video according to the rotation specified in the metadata. The rotation must be within one degree of 90, 180, or 270 degrees. If the rotation metadata specifies any other rotation, the service will default to no rotation. By default, the service does no rotation, even if your input video has rotation metadata. The service doesn't pass through rotation metadata.
          • MotionImageInserter (dict) -- Overlay motion graphics on top of your video. The motion graphics that you specify here appear on all outputs in all output groups. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/motion-graphic-overlay.html.
            • Framerate (dict) -- If your motion graphic asset is a .mov file, keep this setting unspecified. If your motion graphic asset is a series of .png files, specify the frame rate of the overlay in frames per second, as a fraction. For example, specify 24 fps as 24/1. Make sure that the number of images in your series matches the frame rate and your intended overlay duration. For example, if you want a 30-second overlay at 30 fps, you should have 900 .png images. This overlay frame rate doesn't need to match the frame rate of the underlying video.
              • FramerateDenominator (integer) -- The bottom of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 1.
              • FramerateNumerator (integer) -- The top of the fraction that expresses your overlay frame rate. For example, if your frame rate is 24 fps, set this value to 24.
            • Input (string) -- Specify the .mov file or series of .png files that you want to overlay on your video. For .png files, provide the file name of the first file in the series. Make sure that the names of the .png files end with sequential numbers that specify the order that they are played in. For example, overlay_000.png, overlay_001.png, overlay_002.png, and so on. The sequence must start at zero, and each image file name must have the same number of digits. Pad your initial file names with enough zeros to complete the sequence. For example, if the first image is overlay_0.png, there can be only 10 images in the sequence, with the last image being overlay_9.png. But if the first image is overlay_00.png, there can be 100 images in the sequence.
            • InsertionMode (string) -- Choose the type of motion graphic asset that you are providing for your overlay. You can choose either a .mov file or a series of .png files.
            • Offset (dict) -- Use Offset to specify the placement of your motion graphic overlay on the video frame. Specify in pixels, from the upper-left corner of the frame. If you don't specify an offset, the service scales your overlay to the full size of the frame. Otherwise, the service inserts the overlay at its native resolution and scales the size up or down with any video scaling.
              • ImageX (integer) -- Set the distance, in pixels, between the overlay and the left edge of the video frame.
              • ImageY (integer) -- Set the distance, in pixels, between the overlay and the top edge of the video frame.
            • Playback (string) -- Specify whether your motion graphic overlay repeats on a loop or plays only once.
            • StartTime (string) -- Specify when the motion overlay begins. Use timecode format (HH:MM:SS:FF or HH:MM:SS;FF). Make sure that the timecode you provide here takes into account how you have set up your timecode configuration under both job settings and input settings. The simplest way to do that is to set both to start at 0. If you need to set up your job to follow timecodes embedded in your source that don't start at zero, make sure that you specify a start time that is after the first embedded timecode. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/setting-up-timecode.html Find job-wide and input timecode configuration settings in your JSON job settings specification at settings>timecodeConfig>source and settings>inputs>timecodeSource.
          • NielsenConfiguration (dict) -- Settings for your Nielsen configuration. If you don't do Nielsen measurement and analytics, ignore these settings. When you enable Nielsen configuration (nielsenConfiguration), MediaConvert enables PCM to ID3 tagging for all outputs in the job. To enable Nielsen configuration programmatically, include an instance of nielsenConfiguration in your JSON job specification. Even if you don't include any children of nielsenConfiguration, you still enable the setting.
            • BreakoutCode (integer) -- Nielsen has discontinued the use of breakout code functionality. If you must include this property, set the value to zero.
            • DistributorId (string) -- Use Distributor ID (DistributorID) to specify the distributor ID that is assigned to your organization by Neilsen.
          • NielsenNonLinearWatermark (dict) -- Ignore these settings unless you are using Nielsen non-linear watermarking. Specify the values that MediaConvert uses to generate and place Nielsen watermarks in your output audio. In addition to specifying these values, you also need to set up your cloud TIC server. These settings apply to every output in your job. The MediaConvert implementation is currently with the following Nielsen versions: Nielsen Watermark SDK Version 5.2.1 Nielsen NLM Watermark Engine Version 1.2.7 Nielsen Watermark Authenticator [SID_TIC] Version [5.0.0]
            • ActiveWatermarkProcess (string) -- Choose the type of Nielsen watermarks that you want in your outputs. When you choose NAES 2 and NW (NAES2_AND_NW), you must provide a value for the setting SID (sourceId). When you choose CBET (CBET), you must provide a value for the setting CSID (cbetSourceId). When you choose NAES 2, NW, and CBET (NAES2_AND_NW_AND_CBET), you must provide values for both of these settings.
            • AdiFilename (string) -- Optional. Use this setting when you want the service to include an ADI file in the Nielsen metadata .zip file. To provide an ADI file, store it in Amazon S3 and provide a URL to it here. The URL should be in the following format: S3://bucket/path/ADI-file. For more information about the metadata .zip file, see the setting Metadata destination (metadataDestination).
            • AssetId (string) -- Use the asset ID that you provide to Nielsen to uniquely identify this asset. Required for all Nielsen non-linear watermarking.
            • AssetName (string) -- Use the asset name that you provide to Nielsen for this asset. Required for all Nielsen non-linear watermarking.
            • CbetSourceId (string) -- Use the CSID that Nielsen provides to you. This CBET source ID should be unique to your Nielsen account but common to all of your output assets that have CBET watermarking. Required when you choose a value for the setting Watermark types (ActiveWatermarkProcess) that includes CBET.
            • EpisodeId (string) -- Optional. If this asset uses an episode ID with Nielsen, provide it here.
            • MetadataDestination (string) -- Specify the Amazon S3 location where you want MediaConvert to save your Nielsen non-linear metadata .zip file. This Amazon S3 bucket must be in the same Region as the one where you do your MediaConvert transcoding. If you want to include an ADI file in this .zip file, use the setting ADI file (adiFilename) to specify it. MediaConvert delivers the Nielsen metadata .zip files only to your metadata destination Amazon S3 bucket. It doesn't deliver the .zip files to Nielsen. You are responsible for delivering the metadata .zip files to Nielsen.
            • SourceId (integer) -- Use the SID that Nielsen provides to you. This source ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking. This ID should be unique to your Nielsen account but common to all of your output assets. Required for all Nielsen non-linear watermarking.
            • SourceWatermarkStatus (string) -- Required. Specify whether your source content already contains Nielsen non-linear watermarks. When you set this value to Watermarked (WATERMARKED), the service fails the job. Nielsen requires that you add non-linear watermarking to only clean content that doesn't already have non-linear Nielsen watermarks.
            • TicServerUrl (string) -- Specify the endpoint for the TIC server that you have deployed and configured in the AWS Cloud. Required for all Nielsen non-linear watermarking. MediaConvert can't connect directly to a TIC server. Instead, you must use API Gateway to provide a RESTful interface between MediaConvert and a TIC server that you deploy in your AWS account. For more information on deploying a TIC server in your AWS account and the required API Gateway, contact Nielsen support.
            • UniqueTicPerAudioTrack (string) -- To create assets that have the same TIC values in each audio track, keep the default value Share TICs (SAME_TICS_PER_TRACK). To create assets that have unique TIC values for each audio track, choose Use unique TICs (RESERVE_UNIQUE_TICS_PER_TRACK).
          • OutputGroups (list) -- (OutputGroups) contains one group of settings for each set of outputs that share a common package type. All unpackaged files (MPEG-4, MPEG-2 TS, Quicktime, MXF, and no container) are grouped in a single output group as well. Required in (OutputGroups) is a group of settings that apply to the whole group. This required object depends on the value you set for (Type) under (OutputGroups)>(OutputGroupSettings). Type, settings object pairs are as follows. * FILE_GROUP_SETTINGS, FileGroupSettings * HLS_GROUP_SETTINGS, HlsGroupSettings * DASH_ISO_GROUP_SETTINGS, DashIsoGroupSettings * MS_SMOOTH_GROUP_SETTINGS, MsSmoothGroupSettings * CMAF_GROUP_SETTINGS, CmafGroupSettings
            • (dict) -- Group of outputs
              • AutomatedEncodingSettings (dict) -- Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your input video.
                • AbrSettings (dict) -- Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on characteristics of your input video. This feature optimizes video quality while minimizing the overall size of your ABR package.
                  • MaxAbrBitrate (integer) -- Optional. The maximum target bit rate used in your automated ABR stack. Use this value to set an upper limit on the bandwidth consumed by the highest-quality rendition. This is the rendition that is delivered to viewers with the fastest internet connections. If you don't specify a value, MediaConvert uses 8,000,000 (8 mb/s) by default.
                  • MaxRenditions (integer) -- Optional. The maximum number of renditions that MediaConvert will create in your automated ABR stack. The number of renditions is determined automatically, based on analysis of each job, but will never exceed this limit. When you set this to Auto in the console, which is equivalent to excluding it from your JSON job specification, MediaConvert defaults to a limit of 15.
                  • MinAbrBitrate (integer) -- Optional. The minimum target bitrate used in your automated ABR stack. Use this value to set a lower limit on the bitrate of video delivered to viewers with slow internet connections. If you don't specify a value, MediaConvert uses 600,000 (600 kb/s) by default.
              • CustomName (string) -- Use Custom Group Name (CustomName) to specify a name for the output group. This value is displayed on the console and can make your job settings JSON more human-readable. It does not affect your outputs. Use up to twelve characters that are either letters, numbers, spaces, or underscores.
              • Name (string) -- Name of the output group
              • OutputGroupSettings (dict) -- Output Group settings, including type
                • CmafGroupSettings (dict) -- Settings related to your CMAF output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to CMAF_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.
                    • (dict) -- Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this CMAF output group. Each pair of manifests can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Specify the encryption scheme that you want the service to use when encrypting your CMAF segments. Choose AES-CBC subsample (SAMPLE-AES) or AES_CTR (AES-CTR).
                    • InitializationVectorInManifest (string) -- When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in the HLS and DASH manifests.
                    • SpekeKeyProvider (dict) -- If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is HLS, DASH, or Microsoft Smooth, use the SpekeKeyProvider settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • DashSignaledSystemIds (list) -- Specify the DRM system IDs that you want signaled in the DASH manifest that MediaConvert creates as part of this CMAF package. The DASH manifest can currently signal up to three system IDs. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • HlsSignaledSystemIds (list) -- Specify the DRM system ID that you want signaled in the HLS manifest that MediaConvert creates as part of this CMAF package. The HLS manifest can currently signal only one system ID. For more information, see https://dashif.org/identifiers/content_protection/.
                        • (string) --
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • WriteDashManifest (string) -- When set to ENABLED, a DASH MPD manifest will be generated for this output.
                  • WriteHlsManifest (string) -- When set to ENABLED, an Apple HLS manifest will be generated for this output.
                  • WriteSegmentTimelineInRepresentation (string) -- When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.
                • DashIsoGroupSettings (dict) -- Settings related to your DASH output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to DASH_ISO_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional DASH manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your DASH group is film-name.mpd. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.mpd.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioChannelConfigSchemeIdUri (string) -- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration (MPEG_CHANNEL_CONFIGURATION), to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration (DOLBY_CHANNEL_CONFIGURATION) to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
                  • BaseUrl (string) -- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- DRM settings.
                    • PlaybackDeviceCompatibility (string) -- This setting can improve the compatibility of your output with video players on obsolete devices. It applies only to DASH H.264 outputs with DRM encryption. Choose Unencrypted SEI (UNENCRYPTED_SEI) only to correct problems with playback on older devices. Otherwise, keep the default setting CENC v1 (CENC_V1). If you choose Unencrypted SEI, for that output, the service will exclude the access unit delimiter and will leave the SEI NAL units unencrypted.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • HbbtvCompliance (string) -- Supports HbbTV specification as indicated
                  • MinBufferTime (integer) -- Minimum time of initially buffered media that is needed to ensure smooth playout.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MpdProfile (string) -- Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
                  • PtsOffsetHandlingForBFrames (string) -- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
                  • SegmentControl (string) -- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
                  • SegmentLength (integer) -- Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
                  • WriteSegmentTimelineInRepresentation (string) -- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
                • FileGroupSettings (dict) -- Settings related to your File output group. MediaConvert uses this group of settings to generate a single standalone file, rather than a streaming package. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to FILE_GROUP_SETTINGS.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                • HlsGroupSettings (dict) -- Settings related to your HLS output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to HLS_GROUP_SETTINGS.
                  • AdMarkers (list) -- Choose one or more ad marker types to decorate your Apple HLS manifest. This setting does not determine whether SCTE-35 markers appear in the outputs themselves.
                    • (string) --
                  • AdditionalManifests (list) -- By default, the service creates one top-level .m3u8 HLS manifest for each HLS output group in your job. This default manifest references every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional HLS manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your HLS group is film-name.m3u8. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.m3u8. For HLS output groups, specify a manifestNameModifier that is different from the nameModifier of the output. The service uses the output name modifier to create unique names for the individual variant manifests.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioOnlyHeader (string) -- Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues. Keep the default value, Include (INCLUDE), to output audio-only headers. Choose Exclude (EXCLUDE) to remove the audio-only headers from your audio segments.
                  • BaseUrl (string) -- A partial URI prefix that will be prepended to each output in the media .m3u8 file. Can be used if base manifest is delivered from a different URL than the main .m3u8 file.
                  • CaptionLanguageMappings (list) -- Language to be used on Caption outputs
                    • (dict) -- Caption Language Mapping
                      • CaptionChannel (integer) -- Caption channel.
                      • CustomLanguageCode (string) -- Specify the language for this captions channel, using the ISO 639-2 or ISO 639-3 three-letter language code
                      • LanguageCode (string) -- Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.
                      • LanguageDescription (string) -- Caption language description.
                  • CaptionLanguageSetting (string) -- Applies only to 608 Embedded output captions. Insert: Include CLOSED-CAPTIONS lines in the manifest. Specify at least one language in the CC1 Language Code field. One CLOSED-CAPTION line is added for each Language Code you specify. Make sure to specify the languages in the order in which they appear in the original source (if the source is embedded format) or the order of the caption selectors (if the source is other than embedded). Otherwise, languages in the manifest will not match up properly with the output captions. None: Include CLOSED-CAPTIONS=NONE line in the manifest. Omit: Omit any CLOSED-CAPTIONS line from the manifest.
                  • ClientCache (string) -- Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.
                  • CodecSpecification (string) -- Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • DirectoryStructure (string) -- Indicates whether segments should be placed in subdirectories.
                  • Encryption (dict) -- DRM settings.
                    • ConstantInitializationVector (string) -- This is a 128-bit, 16-byte hex value represented by a 32-character text string. If this parameter is not set then the Initialization Vector will follow the segment number by default.
                    • EncryptionMethod (string) -- Encrypts the segments with the given encryption scheme. Leave blank to disable. Selecting 'Disabled' in the web interface also disables encryption.
                    • InitializationVectorInManifest (string) -- The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks. If set to INCLUDE, Initialization Vector is listed in the manifest. Otherwise Initialization Vector is not in the manifest.
                    • OfflineEncrypted (string) -- Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist. This allows for offline Apple HLS FairPlay content protection.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                    • StaticKeyProvider (dict) -- Use these settings to set up encryption with a static key provider.
                      • KeyFormat (string) -- Relates to DRM implementation. Sets the value of the KEYFORMAT attribute. Must be 'identity' or a reverse DNS string. May be omitted to indicate an implicit value of 'identity'.
                      • KeyFormatVersions (string) -- Relates to DRM implementation. Either a single positive integer version value or a slash delimited list of version values (1/2/3).
                      • StaticKeyValue (string) -- Relates to DRM implementation. Use a 32-character hexidecimal string to specify Key Value (StaticKeyValue).
                      • Url (string) -- Relates to DRM implementation. The location of the license server used for protecting content.
                    • Type (string) -- Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard. For more information about SPEKE, see https://docs.aws.amazon.com/speke/latest/documentation/what-is-speke.html.
                  • ManifestCompression (string) -- When set to GZIP, compresses HLS playlist.
                  • ManifestDurationFormat (string) -- Indicates whether the output manifest should use floating point values for segment duration.
                  • MinFinalSegmentLength (float) -- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
                  • MinSegmentLength (integer) -- When set, Minimum Segment Size is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
                  • OutputSelection (string) -- Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
                  • ProgramDateTime (string) -- Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files. The value is calculated as follows: either the program date and time are initialized using the input timecode source, or the time is initialized using the input timecode source and the date is initialized using the timestamp_offset.
                  • ProgramDateTimePeriod (integer) -- Period of insertion of EXT-X-PROGRAM-DATE-TIME entry, in seconds.
                  • SegmentControl (string) -- When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index segment for playback.
                  • SegmentLength (integer) -- Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
                  • SegmentsPerSubdirectory (integer) -- Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
                  • StreamInfResolution (string) -- Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
                  • TimedMetadataId3Frame (string) -- Indicates ID3 frame that has the timecode.
                  • TimedMetadataId3Period (integer) -- Timed Metadata interval in seconds.
                  • TimestampDeltaMilliseconds (integer) -- Provides an extra millisecond delta offset to fine tune the timestamps.
                • MsSmoothGroupSettings (dict) -- Settings related to your Microsoft Smooth Streaming output package. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/outputs-file-ABR.html. When you work directly in your JSON job specification, include this object and any required children when you set Type, under OutputGroupSettings, to MS_SMOOTH_GROUP_SETTINGS.
                  • AdditionalManifests (list) -- By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
                    • (dict) -- Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for this output group. Each manifest can reference a different subset of outputs in the group.
                      • ManifestNameModifier (string) -- Specify a name modifier that the service adds to the name of this manifest to make it different from the file names of the other main manifests in the output group. For example, say that the default main manifest for your Microsoft Smooth group is film-name.ismv. If you enter "-no-premium" for this setting, then the file name the service generates for this top-level manifest is film-name-no-premium.ismv.
                      • SelectedOutputs (list) -- Specify the outputs that you want this additional top-level manifest to reference.
                        • (string) --
                  • AudioDeduplication (string) -- COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a single audio stream.
                  • Destination (string) -- Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
                  • DestinationSettings (dict) -- Settings associated with the destination. Will vary based on the type of destination
                    • S3Settings (dict) -- Settings associated with S3 destination
                      • AccessControl (dict) -- Optional. Have MediaConvert automatically apply Amazon S3 access control for the outputs in this output group. When you don't use this setting, S3 automatically applies the default access control list PRIVATE.
                        • CannedAcl (string) -- Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
                      • Encryption (dict) -- Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
                        • EncryptionType (string) -- Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting KMS ARN (kmsKeyArn).
                        • KmsKeyArn (string) -- Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
                  • Encryption (dict) -- If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
                    • SpekeKeyProvider (dict) -- If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a SPEKE-compliant key provider. If your output group type is CMAF, use the SpekeKeyProviderCmaf settings instead.
                      • CertificateArn (string) -- If you want your key provider to encrypt the content keys that it provides to MediaConvert, set up a certificate with a master key using AWS Certificate Manager. Specify the certificate's Amazon Resource Name (ARN) here.
                      • ResourceId (string) -- Specify the resource ID that your SPEKE-compliant key provider uses to identify this content.
                      • SystemIds (list) -- Relates to SPEKE implementation. DRM system identifiers. DASH output groups support a max of two system ids. Other group types support one system id. See https://dashif.org/identifiers/content_protection/ for more details.
                        • (string) --
                      • Url (string) -- Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
                  • FragmentLength (integer) -- Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
                  • ManifestEncoding (string) -- Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
                • Type (string) -- Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
              • Outputs (list) -- This object holds groups of encoding settings, one group of settings per output.
                • (dict) -- Each output in your job is a collection of settings that describes how you want MediaConvert to encode a single output file or stream. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/create-outputs.html.
                  • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
                    • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
                      • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                        • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
                      • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                        • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                        • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                        • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                        • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                        • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                        • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
                      • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
                      • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
                      • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
                      • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                        • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                          • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                          • CodecProfile (string) -- AAC Profile.
                          • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                          • RateControlMode (string) -- Rate Control Mode.
                          • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                          • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                          • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                          • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                        • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                        • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                        • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                          • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                          • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                          • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                          • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                          • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                        • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                          • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                          • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                          • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                          • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                          • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                          • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                          • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                          • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                          • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                          • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                          • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                          • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                          • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                          • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                          • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                          • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                          • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                          • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                          • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                        • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Sample rate in hz.
                        • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                          • Bitrate (integer) -- Specify the average bitrate in bits per second.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                          • SampleRate (integer) -- Sample rate in hz.
                          • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                        • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                          • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                          • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                        • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                          • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                          • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                          • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                        • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                          • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                          • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                          • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                          • SampleRate (integer) -- Sample rate in Hz.
                      • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
                      • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
                      • RemixSettings (dict) -- Advanced audio remixing settings.
                        • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                          • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                            • (dict) -- OutputChannel mapping settings.
                              • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                                • (integer) --
                              • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                                • (float) --
                        • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                        • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                      • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • CaptionDescriptions (list) -- (CaptionDescriptions) contains groups of captions settings. For each output that has captions, include one instance of (CaptionDescriptions). (CaptionDescriptions) can contain multiple groups of captions settings.
                    • (dict) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
                      • CaptionSelectorName (string) -- Specifies which "Caption Selector":#inputs-caption_selector to use from each input when generating captions. The name should be of the format "Caption Selector ", which denotes that the Nth Caption Selector will be used from each input.
                      • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
                      • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                        • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                        • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                          • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                          • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                          • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                          • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                          • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                          • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                          • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                          • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                          • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                          • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                          • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                          • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                          • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                        • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                          • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                          • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                        • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                          • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                        • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                          • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                        • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                          • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                          • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                            • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                        • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                          • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                        • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                          • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
                      • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
                      • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
                  • ContainerSettings (dict) -- Container specific settings.
                    • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
                      • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
                      • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
                    • F4vSettings (dict) -- Settings for F4v container
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                    • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
                      • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                        • (integer) --
                      • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
                      • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
                      • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                        • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                        • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                        • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                        • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                        • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                      • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                        • (integer) --
                      • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                        • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
                      • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
                      • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
                      • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
                      • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
                      • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
                      • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
                      • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
                      • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
                      • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
                      • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
                      • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                        • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
                      • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
                      • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
                      • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
                      • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
                      • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
                      • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
                      • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
                    • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
                      • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                        • (integer) --
                      • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
                      • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
                      • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
                      • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                      • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
                      • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
                      • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
                      • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
                      • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
                      • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
                      • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
                      • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
                      • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
                    • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
                      • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
                      • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
                      • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
                    • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
                      • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
                      • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
                      • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
                      • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
                    • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
                      • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
                      • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
                      • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
                      • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                      • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
                    • MxfSettings (dict) -- These settings relate to your MXF output container.
                      • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
                      • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
                  • Extension (string) -- Use Extension (Extension) to specify the file extension for outputs in File output groups. If you do not specify a value, the service will use default extensions by container type as follows * MPEG-2 transport stream, m2ts * Quicktime, mov * MXF container, mxf * MPEG-4 container, mp4 * WebM container, webm * No Container, the service will use codec extensions (e.g. AAC, H265, H265, AC3)
                  • NameModifier (string) -- Use Name modifier (NameModifier) to have the service add a string to the end of each output filename. You specify the base filename as part of your destination URI. When you create multiple outputs in the same output group, Name modifier (NameModifier) is required. Name modifier also accepts format identifiers. For DASH ISO outputs, if you use the format identifiers $Number$ or $Time$ in one output, you must use them in the same way in all outputs of the output group.
                  • OutputSettings (dict) -- Specific settings for this type of output.
                    • HlsSettings (dict) -- Settings for HLS output groups
                      • AudioGroupId (string) -- Specifies the group to which the audio rendition belongs.
                      • AudioOnlyContainer (string) -- Use this setting only in audio-only outputs. Choose MPEG-2 Transport Stream (M2TS) to create a file in an MPEG2-TS container. Keep the default value Automatic (AUTOMATIC) to create an audio-only file in a raw container. Regardless of the value that you specify here, if this output has video, the service will place the output into an MPEG2-TS container.
                      • AudioRenditionSets (string) -- List all the audio groups that are used with the video output stream. Input all the audio GROUP-IDs that are associated to the video, separate by ','.
                      • AudioTrackType (string) -- Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only stream instead of video in low-bandwidth scenarios. Represented as an EXT-X-STREAM-INF in the HLS manifest. Alternate Audio, Auto Select, Default Alternate rendition that the client should try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=YES, AUTOSELECT=YES Alternate Audio, Auto Select, Not Default Alternate rendition that the client may try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=YES Alternate Audio, not Auto Select Alternate rendition that the client will not try to play back by default. Represented as an EXT-X-MEDIA in the HLS manifest with DEFAULT=NO, AUTOSELECT=NO
                      • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
                      • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
                      • SegmentModifier (string) -- Use this setting to add an identifying string to the filename of each segment. The service adds this string between the name modifier and segment index number. You can use format identifiers in the string. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html
                  • Preset (string) -- Use Preset (Preset) to specify a preset for your transcoding settings. Provide the system or custom preset name. You can specify either Preset (Preset) or Container settings (ContainerSettings), but not both.
                  • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
                    • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
                    • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
                    • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
                      • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                        • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                      • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                        • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                        • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                          • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
                      • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                        • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                        • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                        • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                        • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
                      • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                        • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                        • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                        • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                        • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                      • H265Settings (dict) -- Settings for H265 codec
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- H.265 Level.
                        • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                          • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                          • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                          • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                        • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                        • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                        • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                        • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                        • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                        • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                        • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
                      • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                        • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                        • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                        • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                        • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                        • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                        • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                        • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                        • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                        • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                        • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                        • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                        • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                      • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                        • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                      • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                        • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                        • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                        • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                        • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
                      • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
                      • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                        • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                        • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                        • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                        • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                        • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                        • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                        • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                        • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                        • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                        • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                        • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                        • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
                    • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
                    • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
                    • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
                    • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
                    • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
                      • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
                      • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
                      • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
                      • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
                    • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
                    • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
                    • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
                    • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
                    • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
                      • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                        • Brightness (integer) -- Brightness level.
                        • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                        • Contrast (integer) -- Contrast level.
                        • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                          • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                          • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                          • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                          • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                          • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                        • Hue (integer) -- Hue in degrees.
                        • Saturation (integer) -- Saturation level.
                      • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                        • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                        • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                        • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
                      • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                        • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                          • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                          • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                        • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                        • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
                      • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                          • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                            • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                            • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                            • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                            • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                            • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                            • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                            • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                            • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                            • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                            • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                            • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
                      • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                        • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                        • FilterSettings (dict) -- Settings for a noise reducer filter
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                          • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                          • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                          • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                        • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                          • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                          • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                          • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                          • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
                      • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                        • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                          • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                          • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                          • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
                      • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                        • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                        • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                        • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
                    • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
          • TimecodeConfig (dict) -- These settings control how the service handles timecodes throughout the job. These settings don't affect input clipping.
            • Anchor (string) -- If you use an editing platform that relies on an anchor timecode, use Anchor Timecode (Anchor) to specify a timecode that will match the input video frame to the output video frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF). This setting ignores frame rate conversion. System behavior for Anchor Timecode varies depending on your setting for Source (TimecodeSource). * If Source (TimecodeSource) is set to Specified Start (SPECIFIEDSTART), the first input frame is the specified value in Start Timecode (Start). Anchor Timecode (Anchor) and Start Timecode (Start) are used calculate output timecode. * If Source (TimecodeSource) is set to Start at 0 (ZEROBASED) the first frame is 00:00:00:00. * If Source (TimecodeSource) is set to Embedded (EMBEDDED), the first frame is the timecode value on the first input frame of the input.
            • Source (string) -- Use Source (TimecodeSource) to set how timecodes are handled within this job. To make sure that your video, audio, captions, and markers are synchronized and that time-based features, such as image inserter, work correctly, choose the Timecode source option that matches your assets. All timecodes are in a 24-hour format with frame number (HH:MM:SS:FF). * Embedded (EMBEDDED) - Use the timecode that is in the input video. If no embedded timecode is in the source, the service will use Start at 0 (ZEROBASED) instead. * Start at 0 (ZEROBASED) - Set the timecode of the initial frame to 00:00:00:00. * Specified Start (SPECIFIEDSTART) - Set the timecode of the initial frame to a value other than zero. You use Start timecode (Start) to provide this value.
            • Start (string) -- Only use when you set Source (TimecodeSource) to Specified start (SPECIFIEDSTART). Use Start timecode (Start) to specify the timecode for the initial frame. Use 24-hour format with frame number, (HH:MM:SS:FF) or (HH:MM:SS;FF).
            • TimestampOffset (string) -- Only applies to outputs that support program-date-time stamp. Use Timestamp offset (TimestampOffset) to overwrite the timecode date without affecting the time and frame number. Provide the new date as a string in the format "yyyy-mm-dd". To use Time stamp offset, you must also enable Insert program-date-time (InsertProgramDateTime) in the output settings. For example, if the date part of your timecodes is 2002-1-25 and you want to change it to one year later, set Timestamp offset (TimestampOffset) to 2003-1-25.
          • TimedMetadataInsertion (dict) -- Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs. To include timed metadata, you must enable it here, enable it in each output container, and specify tags and timecodes in ID3 insertion (Id3Insertion) objects.
            • Id3Insertions (list) -- Id3Insertions contains the array of Id3Insertion instances.
              • (dict) -- To insert ID3 tags in your output, specify two values. Use ID3 tag (Id3) to specify the base 64 encoded string and use Timecode (TimeCode) to specify the time when the tag should be inserted. To insert multiple ID3 tags in your output, create multiple instances of ID3 insertion (Id3Insertion).
                • Id3 (string) -- Use ID3 tag (Id3) to provide a tag value in base64-encode format.
                • Timecode (string) -- Provide a Timecode (TimeCode) in HH:MM:SS:FF or HH:MM:SS;FF format.
        • SimulateReservedQueue (string) -- Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need. When this is enabled, MediaConvert runs your job from an on-demand queue with similar performance to what you will see with one RTS in a reserved queue. This setting is disabled by default.
        • Status (string) -- A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
        • StatusUpdateInterval (string) -- Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events. Set the interval, in seconds, between status updates. MediaConvert sends an update at this interval from the time the service begins processing your job to the time it completes the transcode or encounters an error.
        • Timing (dict) -- Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
          • FinishTime (datetime) -- The time, in Unix epoch format, that the transcoding job finished
          • StartTime (datetime) -- The time, in Unix epoch format, that transcoding for the job began.
          • SubmitTime (datetime) -- The time, in Unix epoch format, that you submitted the job.
        • UserMetadata (dict) -- User-defined metadata that you want to associate with an MediaConvert job. You specify metadata in key/value pairs.
          • (string) --
            • (string) --

class MediaConvert.Paginator.ListPresets
paginator = client.get_paginator('list_presets')
paginate(**kwargs)

Creates an iterator that will paginate through responses from MediaConvert.Client.list_presets().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    Category='string',
    ListBy='NAME'|'CREATION_DATE'|'SYSTEM',
    Order='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • Category (string) -- Optionally, specify a preset category to limit responses to only presets from that category.
  • ListBy (string) -- Optional. When you request a list of presets, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Presets': [
        {
            'Arn': 'string',
            'Category': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'Settings': {
                'AudioDescriptions': [
                    {
                        'AudioChannelTaggingSettings': {
                            'ChannelTag': 'L'|'R'|'C'|'LFE'|'LS'|'RS'|'LC'|'RC'|'CS'|'LSD'|'RSD'|'TCS'|'VHL'|'VHC'|'VHR'
                        },
                        'AudioNormalizationSettings': {
                            'Algorithm': 'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                            'AlgorithmControl': 'CORRECT_AUDIO'|'MEASURE_ONLY',
                            'CorrectionGateLevel': 123,
                            'LoudnessLogging': 'LOG'|'DONT_LOG',
                            'PeakCalculation': 'TRUE_PEAK'|'NONE',
                            'TargetLkfs': 123.0
                        },
                        'AudioSourceName': 'string',
                        'AudioType': 123,
                        'AudioTypeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'CodecSettings': {
                            'AacSettings': {
                                'AudioDescriptionBroadcasterMix': 'BROADCASTER_MIXED_AD'|'NORMAL',
                                'Bitrate': 123,
                                'CodecProfile': 'LC'|'HEV1'|'HEV2',
                                'CodingMode': 'AD_RECEIVER_MIX'|'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_5_1',
                                'RateControlMode': 'CBR'|'VBR',
                                'RawFormat': 'LATM_LOAS'|'NONE',
                                'SampleRate': 123,
                                'Specification': 'MPEG2'|'MPEG4',
                                'VbrQuality': 'LOW'|'MEDIUM_LOW'|'MEDIUM_HIGH'|'HIGH'
                            },
                            'Ac3Settings': {
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'DIALOGUE'|'EMERGENCY'|'HEARING_IMPAIRED'|'MUSIC_AND_EFFECTS'|'VISUALLY_IMPAIRED'|'VOICE_OVER',
                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_1_1'|'CODING_MODE_2_0'|'CODING_MODE_3_2_LFE',
                                'Dialnorm': 123,
                                'DynamicRangeCompressionLine': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                'DynamicRangeCompressionProfile': 'FILM_STANDARD'|'NONE',
                                'DynamicRangeCompressionRf': 'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH'|'NONE',
                                'LfeFilter': 'ENABLED'|'DISABLED',
                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'SampleRate': 123
                            },
                            'AiffSettings': {
                                'BitDepth': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'Codec': 'AAC'|'MP2'|'MP3'|'WAV'|'AIFF'|'AC3'|'EAC3'|'EAC3_ATMOS'|'VORBIS'|'OPUS'|'PASSTHROUGH',
                            'Eac3AtmosSettings': {
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN',
                                'CodingMode': 'CODING_MODE_9_1_6',
                                'DialogueIntelligence': 'ENABLED'|'DISABLED',
                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'LoRoCenterMixLevel': 123.0,
                                'LoRoSurroundMixLevel': 123.0,
                                'LtRtCenterMixLevel': 123.0,
                                'LtRtSurroundMixLevel': 123.0,
                                'MeteringMode': 'LEQ_A'|'ITU_BS_1770_1'|'ITU_BS_1770_2'|'ITU_BS_1770_3'|'ITU_BS_1770_4',
                                'SampleRate': 123,
                                'SpeechThreshold': 123,
                                'StereoDownmix': 'NOT_INDICATED'|'STEREO'|'SURROUND'|'DPL2',
                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                            },
                            'Eac3Settings': {
                                'AttenuationControl': 'ATTENUATE_3_DB'|'NONE',
                                'Bitrate': 123,
                                'BitstreamMode': 'COMPLETE_MAIN'|'COMMENTARY'|'EMERGENCY'|'HEARING_IMPAIRED'|'VISUALLY_IMPAIRED',
                                'CodingMode': 'CODING_MODE_1_0'|'CODING_MODE_2_0'|'CODING_MODE_3_2',
                                'DcFilter': 'ENABLED'|'DISABLED',
                                'Dialnorm': 123,
                                'DynamicRangeCompressionLine': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'DynamicRangeCompressionRf': 'NONE'|'FILM_STANDARD'|'FILM_LIGHT'|'MUSIC_STANDARD'|'MUSIC_LIGHT'|'SPEECH',
                                'LfeControl': 'LFE'|'NO_LFE',
                                'LfeFilter': 'ENABLED'|'DISABLED',
                                'LoRoCenterMixLevel': 123.0,
                                'LoRoSurroundMixLevel': 123.0,
                                'LtRtCenterMixLevel': 123.0,
                                'LtRtSurroundMixLevel': 123.0,
                                'MetadataControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                                'PassthroughControl': 'WHEN_POSSIBLE'|'NO_PASSTHROUGH',
                                'PhaseControl': 'SHIFT_90_DEGREES'|'NO_SHIFT',
                                'SampleRate': 123,
                                'StereoDownmix': 'NOT_INDICATED'|'LO_RO'|'LT_RT'|'DPL2',
                                'SurroundExMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED',
                                'SurroundMode': 'NOT_INDICATED'|'ENABLED'|'DISABLED'
                            },
                            'Mp2Settings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'Mp3Settings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'RateControlMode': 'CBR'|'VBR',
                                'SampleRate': 123,
                                'VbrQuality': 123
                            },
                            'OpusSettings': {
                                'Bitrate': 123,
                                'Channels': 123,
                                'SampleRate': 123
                            },
                            'VorbisSettings': {
                                'Channels': 123,
                                'SampleRate': 123,
                                'VbrQuality': 123
                            },
                            'WavSettings': {
                                'BitDepth': 123,
                                'Channels': 123,
                                'Format': 'RIFF'|'RF64',
                                'SampleRate': 123
                            }
                        },
                        'CustomLanguageCode': 'string',
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'LanguageCodeControl': 'FOLLOW_INPUT'|'USE_CONFIGURED',
                        'RemixSettings': {
                            'ChannelMapping': {
                                'OutputChannels': [
                                    {
                                        'InputChannels': [
                                            123,
                                        ],
                                        'InputChannelsFineTune': [
                                            123.0,
                                        ]
                                    },
                                ]
                            },
                            'ChannelsIn': 123,
                            'ChannelsOut': 123
                        },
                        'StreamName': 'string'
                    },
                ],
                'CaptionDescriptions': [
                    {
                        'CustomLanguageCode': 'string',
                        'DestinationSettings': {
                            'BurninDestinationSettings': {
                                'Alignment': 'CENTERED'|'LEFT',
                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                'BackgroundOpacity': 123,
                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'FontOpacity': 123,
                                'FontResolution': 123,
                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                'FontSize': 123,
                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'OutlineSize': 123,
                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                'ShadowOpacity': 123,
                                'ShadowXOffset': 123,
                                'ShadowYOffset': 123,
                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                'XPosition': 123,
                                'YPosition': 123
                            },
                            'DestinationType': 'BURN_IN'|'DVB_SUB'|'EMBEDDED'|'EMBEDDED_PLUS_SCTE20'|'IMSC'|'SCTE20_PLUS_EMBEDDED'|'SCC'|'SRT'|'SMI'|'TELETEXT'|'TTML'|'WEBVTT',
                            'DvbSubDestinationSettings': {
                                'Alignment': 'CENTERED'|'LEFT',
                                'BackgroundColor': 'NONE'|'BLACK'|'WHITE',
                                'BackgroundOpacity': 123,
                                'FontColor': 'WHITE'|'BLACK'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'FontOpacity': 123,
                                'FontResolution': 123,
                                'FontScript': 'AUTOMATIC'|'HANS'|'HANT',
                                'FontSize': 123,
                                'OutlineColor': 'BLACK'|'WHITE'|'YELLOW'|'RED'|'GREEN'|'BLUE',
                                'OutlineSize': 123,
                                'ShadowColor': 'NONE'|'BLACK'|'WHITE',
                                'ShadowOpacity': 123,
                                'ShadowXOffset': 123,
                                'ShadowYOffset': 123,
                                'SubtitlingType': 'HEARING_IMPAIRED'|'STANDARD',
                                'TeletextSpacing': 'FIXED_GRID'|'PROPORTIONAL',
                                'XPosition': 123,
                                'YPosition': 123
                            },
                            'EmbeddedDestinationSettings': {
                                'Destination608ChannelNumber': 123,
                                'Destination708ServiceNumber': 123
                            },
                            'ImscDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            },
                            'SccDestinationSettings': {
                                'Framerate': 'FRAMERATE_23_97'|'FRAMERATE_24'|'FRAMERATE_25'|'FRAMERATE_29_97_DROPFRAME'|'FRAMERATE_29_97_NON_DROPFRAME'
                            },
                            'TeletextDestinationSettings': {
                                'PageNumber': 'string',
                                'PageTypes': [
                                    'PAGE_TYPE_INITIAL'|'PAGE_TYPE_SUBTITLE'|'PAGE_TYPE_ADDL_INFO'|'PAGE_TYPE_PROGRAM_SCHEDULE'|'PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE',
                                ]
                            },
                            'TtmlDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            },
                            'WebvttDestinationSettings': {
                                'StylePassthrough': 'ENABLED'|'DISABLED'
                            }
                        },
                        'LanguageCode': 'ENG'|'SPA'|'FRA'|'DEU'|'GER'|'ZHO'|'ARA'|'HIN'|'JPN'|'RUS'|'POR'|'ITA'|'URD'|'VIE'|'KOR'|'PAN'|'ABK'|'AAR'|'AFR'|'AKA'|'SQI'|'AMH'|'ARG'|'HYE'|'ASM'|'AVA'|'AVE'|'AYM'|'AZE'|'BAM'|'BAK'|'EUS'|'BEL'|'BEN'|'BIH'|'BIS'|'BOS'|'BRE'|'BUL'|'MYA'|'CAT'|'KHM'|'CHA'|'CHE'|'NYA'|'CHU'|'CHV'|'COR'|'COS'|'CRE'|'HRV'|'CES'|'DAN'|'DIV'|'NLD'|'DZO'|'ENM'|'EPO'|'EST'|'EWE'|'FAO'|'FIJ'|'FIN'|'FRM'|'FUL'|'GLA'|'GLG'|'LUG'|'KAT'|'ELL'|'GRN'|'GUJ'|'HAT'|'HAU'|'HEB'|'HER'|'HMO'|'HUN'|'ISL'|'IDO'|'IBO'|'IND'|'INA'|'ILE'|'IKU'|'IPK'|'GLE'|'JAV'|'KAL'|'KAN'|'KAU'|'KAS'|'KAZ'|'KIK'|'KIN'|'KIR'|'KOM'|'KON'|'KUA'|'KUR'|'LAO'|'LAT'|'LAV'|'LIM'|'LIN'|'LIT'|'LUB'|'LTZ'|'MKD'|'MLG'|'MSA'|'MAL'|'MLT'|'GLV'|'MRI'|'MAR'|'MAH'|'MON'|'NAU'|'NAV'|'NDE'|'NBL'|'NDO'|'NEP'|'SME'|'NOR'|'NOB'|'NNO'|'OCI'|'OJI'|'ORI'|'ORM'|'OSS'|'PLI'|'FAS'|'POL'|'PUS'|'QUE'|'QAA'|'RON'|'ROH'|'RUN'|'SMO'|'SAG'|'SAN'|'SRD'|'SRB'|'SNA'|'III'|'SND'|'SIN'|'SLK'|'SLV'|'SOM'|'SOT'|'SUN'|'SWA'|'SSW'|'SWE'|'TGL'|'TAH'|'TGK'|'TAM'|'TAT'|'TEL'|'THA'|'BOD'|'TIR'|'TON'|'TSO'|'TSN'|'TUR'|'TUK'|'TWI'|'UIG'|'UKR'|'UZB'|'VEN'|'VOL'|'WLN'|'CYM'|'FRY'|'WOL'|'XHO'|'YID'|'YOR'|'ZHA'|'ZUL'|'ORJ'|'QPC'|'TNG',
                        'LanguageDescription': 'string'
                    },
                ],
                'ContainerSettings': {
                    'CmfcSettings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioGroupId': 'string',
                        'AudioRenditionSets': 'string',
                        'AudioTrackType': 'ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT'|'ALTERNATE_AUDIO_AUTO_SELECT'|'ALTERNATE_AUDIO_NOT_AUTO_SELECT',
                        'DescriptiveVideoServiceFlag': 'DONT_FLAG'|'FLAG',
                        'IFrameOnlyManifest': 'INCLUDE'|'EXCLUDE',
                        'Scte35Esam': 'INSERT'|'NONE',
                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                    },
                    'Container': 'F4V'|'ISMV'|'M2TS'|'M3U8'|'CMFC'|'MOV'|'MP4'|'MPD'|'MXF'|'WEBM'|'RAW',
                    'F4vSettings': {
                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL'
                    },
                    'M2tsSettings': {
                        'AudioBufferModel': 'DVB'|'ATSC',
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioFramesPerPes': 123,
                        'AudioPids': [
                            123,
                        ],
                        'Bitrate': 123,
                        'BufferModel': 'MULTIPLEX'|'NONE',
                        'DvbNitSettings': {
                            'NetworkId': 123,
                            'NetworkName': 'string',
                            'NitInterval': 123
                        },
                        'DvbSdtSettings': {
                            'OutputSdt': 'SDT_FOLLOW'|'SDT_FOLLOW_IF_PRESENT'|'SDT_MANUAL'|'SDT_NONE',
                            'SdtInterval': 123,
                            'ServiceName': 'string',
                            'ServiceProviderName': 'string'
                        },
                        'DvbSubPids': [
                            123,
                        ],
                        'DvbTdtSettings': {
                            'TdtInterval': 123
                        },
                        'DvbTeletextPid': 123,
                        'EbpAudioInterval': 'VIDEO_AND_FIXED_INTERVALS'|'VIDEO_INTERVAL',
                        'EbpPlacement': 'VIDEO_AND_AUDIO_PIDS'|'VIDEO_PID',
                        'EsRateInPes': 'INCLUDE'|'EXCLUDE',
                        'ForceTsVideoEbpOrder': 'FORCE'|'DEFAULT',
                        'FragmentTime': 123.0,
                        'MaxPcrInterval': 123,
                        'MinEbpInterval': 123,
                        'NielsenId3': 'INSERT'|'NONE',
                        'NullPacketBitrate': 123.0,
                        'PatInterval': 123,
                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                        'PcrPid': 123,
                        'PmtInterval': 123,
                        'PmtPid': 123,
                        'PrivateMetadataPid': 123,
                        'ProgramNumber': 123,
                        'RateMode': 'VBR'|'CBR',
                        'Scte35Esam': {
                            'Scte35EsamPid': 123
                        },
                        'Scte35Pid': 123,
                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                        'SegmentationMarkers': 'NONE'|'RAI_SEGSTART'|'RAI_ADAPT'|'PSI_SEGSTART'|'EBP'|'EBP_LEGACY',
                        'SegmentationStyle': 'MAINTAIN_CADENCE'|'RESET_CADENCE',
                        'SegmentationTime': 123.0,
                        'TimedMetadataPid': 123,
                        'TransportStreamId': 123,
                        'VideoPid': 123
                    },
                    'M3u8Settings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'AudioFramesPerPes': 123,
                        'AudioPids': [
                            123,
                        ],
                        'NielsenId3': 'INSERT'|'NONE',
                        'PatInterval': 123,
                        'PcrControl': 'PCR_EVERY_PES_PACKET'|'CONFIGURED_PCR_PERIOD',
                        'PcrPid': 123,
                        'PmtInterval': 123,
                        'PmtPid': 123,
                        'PrivateMetadataPid': 123,
                        'ProgramNumber': 123,
                        'Scte35Pid': 123,
                        'Scte35Source': 'PASSTHROUGH'|'NONE',
                        'TimedMetadata': 'PASSTHROUGH'|'NONE',
                        'TimedMetadataPid': 123,
                        'TransportStreamId': 123,
                        'VideoPid': 123
                    },
                    'MovSettings': {
                        'ClapAtom': 'INCLUDE'|'EXCLUDE',
                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                        'Mpeg2FourCCControl': 'XDCAM'|'MPEG',
                        'PaddingControl': 'OMNEON'|'NONE',
                        'Reference': 'SELF_CONTAINED'|'EXTERNAL'
                    },
                    'Mp4Settings': {
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'CslgAtom': 'INCLUDE'|'EXCLUDE',
                        'CttsVersion': 123,
                        'FreeSpaceBox': 'INCLUDE'|'EXCLUDE',
                        'MoovPlacement': 'PROGRESSIVE_DOWNLOAD'|'NORMAL',
                        'Mp4MajorBrand': 'string'
                    },
                    'MpdSettings': {
                        'AccessibilityCaptionHints': 'INCLUDE'|'EXCLUDE',
                        'AudioDuration': 'DEFAULT_CODEC_DURATION'|'MATCH_VIDEO_DURATION',
                        'CaptionContainerType': 'RAW'|'FRAGMENTED_MP4',
                        'Scte35Esam': 'INSERT'|'NONE',
                        'Scte35Source': 'PASSTHROUGH'|'NONE'
                    },
                    'MxfSettings': {
                        'AfdSignaling': 'NO_COPY'|'COPY_FROM_VIDEO',
                        'Profile': 'D_10'|'XDCAM'|'OP1A'
                    }
                },
                'VideoDescription': {
                    'AfdSignaling': 'NONE'|'AUTO'|'FIXED',
                    'AntiAlias': 'DISABLED'|'ENABLED',
                    'CodecSettings': {
                        'Av1Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'MaxBitrate': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'QvbrSettings': {
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'QVBR',
                            'Slices': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED'
                        },
                        'AvcIntraSettings': {
                            'AvcIntraClass': 'CLASS_50'|'CLASS_100'|'CLASS_200'|'CLASS_4K_2K',
                            'AvcIntraUhdSettings': {
                                'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS'
                            },
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD'
                        },
                        'Codec': 'AV1'|'AVC_INTRA'|'FRAME_CAPTURE'|'H_264'|'H_265'|'MPEG2'|'PRORES'|'VC3'|'VP8'|'VP9',
                        'FrameCaptureSettings': {
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'MaxCaptures': 123,
                            'Quality': 123
                        },
                        'H264Settings': {
                            'AdaptiveQuantization': 'OFF'|'AUTO'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_1_1'|'LEVEL_1_2'|'LEVEL_1_3'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_2_2'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_3_2'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_4_2'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2',
                            'CodecProfile': 'BASELINE'|'HIGH'|'HIGH_10BIT'|'HIGH_422'|'HIGH_422_10BIT'|'MAIN',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'EntropyEncoding': 'CABAC'|'CAVLC',
                            'FieldEncoding': 'PAFF'|'FORCE_FIELD',
                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopBReference': 'DISABLED'|'ENABLED',
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'NumberReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                            'QvbrSettings': {
                                'MaxAverageBitrate': 123,
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                            'RepeatPps': 'DISABLED'|'ENABLED',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                            'Slices': 123,
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Softness': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Syntax': 'DEFAULT'|'RP2027',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED'
                        },
                        'H265Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH'|'HIGHER'|'MAX',
                            'AlternateTransferFunctionSei': 'DISABLED'|'ENABLED',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LEVEL_1'|'LEVEL_2'|'LEVEL_2_1'|'LEVEL_3'|'LEVEL_3_1'|'LEVEL_4'|'LEVEL_4_1'|'LEVEL_5'|'LEVEL_5_1'|'LEVEL_5_2'|'LEVEL_6'|'LEVEL_6_1'|'LEVEL_6_2',
                            'CodecProfile': 'MAIN_MAIN'|'MAIN_HIGH'|'MAIN10_MAIN'|'MAIN10_HIGH'|'MAIN_422_8BIT_MAIN'|'MAIN_422_8BIT_HIGH'|'MAIN_422_10BIT_MAIN'|'MAIN_422_10BIT_HIGH',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'FlickerAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopBReference': 'DISABLED'|'ENABLED',
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'NumberReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'SINGLE_PASS_HQ'|'MULTI_PASS_HQ',
                            'QvbrSettings': {
                                'MaxAverageBitrate': 123,
                                'QvbrQualityLevel': 123,
                                'QvbrQualityLevelFineTune': 123.0
                            },
                            'RateControlMode': 'VBR'|'CBR'|'QVBR',
                            'SampleAdaptiveOffsetFilterMode': 'DEFAULT'|'ADAPTIVE'|'OFF',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED'|'TRANSITION_DETECTION',
                            'Slices': 123,
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'TemporalIds': 'DISABLED'|'ENABLED',
                            'Tiles': 'DISABLED'|'ENABLED',
                            'UnregisteredSeiTimecode': 'DISABLED'|'ENABLED',
                            'WriteMp4PackagingType': 'HVC1'|'HEV1'
                        },
                        'Mpeg2Settings': {
                            'AdaptiveQuantization': 'OFF'|'LOW'|'MEDIUM'|'HIGH',
                            'Bitrate': 123,
                            'CodecLevel': 'AUTO'|'LOW'|'MAIN'|'HIGH1440'|'HIGH',
                            'CodecProfile': 'MAIN'|'PROFILE_422',
                            'DynamicSubGop': 'ADAPTIVE'|'STATIC',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopClosedCadence': 123,
                            'GopSize': 123.0,
                            'GopSizeUnits': 'FRAMES'|'SECONDS',
                            'HrdBufferInitialFillPercentage': 123,
                            'HrdBufferSize': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'IntraDcPrecision': 'AUTO'|'INTRA_DC_PRECISION_8'|'INTRA_DC_PRECISION_9'|'INTRA_DC_PRECISION_10'|'INTRA_DC_PRECISION_11',
                            'MaxBitrate': 123,
                            'MinIInterval': 123,
                            'NumberBFramesBetweenReferenceFrames': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'SINGLE_PASS'|'MULTI_PASS',
                            'RateControlMode': 'VBR'|'CBR',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SceneChangeDetect': 'DISABLED'|'ENABLED',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Softness': 123,
                            'SpatialAdaptiveQuantization': 'DISABLED'|'ENABLED',
                            'Syntax': 'DEFAULT'|'D_10',
                            'Telecine': 'NONE'|'SOFT'|'HARD',
                            'TemporalAdaptiveQuantization': 'DISABLED'|'ENABLED'
                        },
                        'ProresSettings': {
                            'CodecProfile': 'APPLE_PRORES_422'|'APPLE_PRORES_422_HQ'|'APPLE_PRORES_422_LT'|'APPLE_PRORES_422_PROXY',
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'PROGRESSIVE'|'TOP_FIELD'|'BOTTOM_FIELD'|'FOLLOW_TOP_FIELD'|'FOLLOW_BOTTOM_FIELD',
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD'
                        },
                        'Vc3Settings': {
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'InterlaceMode': 'INTERLACED'|'PROGRESSIVE',
                            'ScanTypeConversionMode': 'INTERLACED'|'INTERLACED_OPTIMIZE',
                            'SlowPal': 'DISABLED'|'ENABLED',
                            'Telecine': 'NONE'|'HARD',
                            'Vc3Class': 'CLASS_145_8BIT'|'CLASS_220_8BIT'|'CLASS_220_10BIT'
                        },
                        'Vp8Settings': {
                            'Bitrate': 123,
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'HrdBufferSize': 123,
                            'MaxBitrate': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                            'RateControlMode': 'VBR'
                        },
                        'Vp9Settings': {
                            'Bitrate': 123,
                            'FramerateControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'FramerateConversionAlgorithm': 'DUPLICATE_DROP'|'INTERPOLATE'|'FRAMEFORMER',
                            'FramerateDenominator': 123,
                            'FramerateNumerator': 123,
                            'GopSize': 123.0,
                            'HrdBufferSize': 123,
                            'MaxBitrate': 123,
                            'ParControl': 'INITIALIZE_FROM_SOURCE'|'SPECIFIED',
                            'ParDenominator': 123,
                            'ParNumerator': 123,
                            'QualityTuningLevel': 'MULTI_PASS'|'MULTI_PASS_HQ',
                            'RateControlMode': 'VBR'
                        }
                    },
                    'ColorMetadata': 'IGNORE'|'INSERT',
                    'Crop': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'DropFrameTimecode': 'DISABLED'|'ENABLED',
                    'FixedAfd': 123,
                    'Height': 123,
                    'Position': {
                        'Height': 123,
                        'Width': 123,
                        'X': 123,
                        'Y': 123
                    },
                    'RespondToAfd': 'NONE'|'RESPOND'|'PASSTHROUGH',
                    'ScalingBehavior': 'DEFAULT'|'STRETCH_TO_OUTPUT',
                    'Sharpness': 123,
                    'TimecodeInsertion': 'DISABLED'|'PIC_TIMING_SEI',
                    'VideoPreprocessors': {
                        'ColorCorrector': {
                            'Brightness': 123,
                            'ColorSpaceConversion': 'NONE'|'FORCE_601'|'FORCE_709'|'FORCE_HDR10'|'FORCE_HLG_2020',
                            'Contrast': 123,
                            'Hdr10Metadata': {
                                'BluePrimaryX': 123,
                                'BluePrimaryY': 123,
                                'GreenPrimaryX': 123,
                                'GreenPrimaryY': 123,
                                'MaxContentLightLevel': 123,
                                'MaxFrameAverageLightLevel': 123,
                                'MaxLuminance': 123,
                                'MinLuminance': 123,
                                'RedPrimaryX': 123,
                                'RedPrimaryY': 123,
                                'WhitePointX': 123,
                                'WhitePointY': 123
                            },
                            'Hue': 123,
                            'Saturation': 123
                        },
                        'Deinterlacer': {
                            'Algorithm': 'INTERPOLATE'|'INTERPOLATE_TICKER'|'BLEND'|'BLEND_TICKER',
                            'Control': 'FORCE_ALL_FRAMES'|'NORMAL',
                            'Mode': 'DEINTERLACE'|'INVERSE_TELECINE'|'ADAPTIVE'
                        },
                        'DolbyVision': {
                            'L6Metadata': {
                                'MaxCll': 123,
                                'MaxFall': 123
                            },
                            'L6Mode': 'PASSTHROUGH'|'RECALCULATE'|'SPECIFY',
                            'Profile': 'PROFILE_5'
                        },
                        'ImageInserter': {
                            'InsertableImages': [
                                {
                                    'Duration': 123,
                                    'FadeIn': 123,
                                    'FadeOut': 123,
                                    'Height': 123,
                                    'ImageInserterInput': 'string',
                                    'ImageX': 123,
                                    'ImageY': 123,
                                    'Layer': 123,
                                    'Opacity': 123,
                                    'StartTime': 'string',
                                    'Width': 123
                                },
                            ]
                        },
                        'NoiseReducer': {
                            'Filter': 'BILATERAL'|'MEAN'|'GAUSSIAN'|'LANCZOS'|'SHARPEN'|'CONSERVE'|'SPATIAL'|'TEMPORAL',
                            'FilterSettings': {
                                'Strength': 123
                            },
                            'SpatialFilterSettings': {
                                'PostFilterSharpenStrength': 123,
                                'Speed': 123,
                                'Strength': 123
                            },
                            'TemporalFilterSettings': {
                                'AggressiveMode': 123,
                                'PostTemporalSharpening': 'DISABLED'|'ENABLED'|'AUTO',
                                'Speed': 123,
                                'Strength': 123
                            }
                        },
                        'PartnerWatermarking': {
                            'NexguardFileMarkerSettings': {
                                'License': 'string',
                                'Payload': 123,
                                'Preset': 'string',
                                'Strength': 'LIGHTEST'|'LIGHTER'|'DEFAULT'|'STRONGER'|'STRONGEST'
                            }
                        },
                        'TimecodeBurnin': {
                            'FontSize': 123,
                            'Position': 'TOP_CENTER'|'TOP_LEFT'|'TOP_RIGHT'|'MIDDLE_LEFT'|'MIDDLE_CENTER'|'MIDDLE_RIGHT'|'BOTTOM_LEFT'|'BOTTOM_CENTER'|'BOTTOM_RIGHT',
                            'Prefix': 'string'
                        }
                    },
                    'Width': 123
                }
            },
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ]
}

Response Structure

  • (dict) --
    • Presets (list) -- List of presets
      • (dict) -- A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • Category (string) -- An optional category you create to organize your presets.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for preset creation.
        • Description (string) -- An optional description you create for each preset.
        • LastUpdated (datetime) -- The timestamp in epoch seconds when the preset was last updated.
        • Name (string) -- A name you create for each preset. Each name must be unique within your account.
        • Settings (dict) -- Settings for preset
          • AudioDescriptions (list) -- (AudioDescriptions) contains groups of audio encoding settings organized by audio codec. Include one instance of (AudioDescriptions) per output. (AudioDescriptions) can contain multiple groups of encoding settings.
            • (dict) -- Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.
              • AudioChannelTaggingSettings (dict) -- When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout manually. For example, you would tag the tracks that contain your left, right, and center audio with Left (L), Right (R), and Center (C), respectively. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use audio layout tagging, your output must be in a QuickTime (.mov) container; your audio codec must be AAC, WAV, or AIFF; and you must set up your audio track to have only one channel.
                • ChannelTag (string) -- You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout. For example, if this track is the left surround channel, choose Left surround (LS).
              • AudioNormalizationSettings (dict) -- Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.
                • Algorithm (string) -- Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.
                • AlgorithmControl (string) -- When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.
                • CorrectionGateLevel (integer) -- Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.
                • LoudnessLogging (string) -- If set to LOG, log each output's audio track loudness to a CSV file.
                • PeakCalculation (string) -- If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
                • TargetLkfs (float) -- When you use Audio normalization (AudioNormalizationSettings), optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm (algorithm). If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.
              • AudioSourceName (string) -- Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.
              • AudioType (integer) -- Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.
              • AudioTypeControl (string) -- When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.
              • CodecSettings (dict) -- Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.
                • AacSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode (rateControlMode) to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality (vbrQuality). In CBR mode, you use the setting Bitrate (bitrate). Defaults and valid values depend on the rate control mode.
                  • AudioDescriptionBroadcasterMix (string) -- Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile (codecProfile), Bitrate control mode (codingMode), and Sample rate (sampleRate). Default values depend on Bitrate control mode and Profile.
                  • CodecProfile (string) -- AAC Profile.
                  • CodingMode (string) -- Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
                  • RateControlMode (string) -- Rate Control Mode.
                  • RawFormat (string) -- Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.
                  • SampleRate (integer) -- Sample rate in Hz. Valid values depend on rate control mode and profile.
                  • Specification (string) -- Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
                  • VbrQuality (string) -- VBR Quality Level - Only used if rate_control_mode is VBR.
                • Ac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                  • BitstreamMode (string) -- Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- Dolby Digital coding mode. Determines number of channels.
                  • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.
                  • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • DynamicRangeCompressionProfile (string) -- When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile (DynamicRangeCompressionProfile). The mode-specific settings are Dynamic range compression profile, line mode (dynamicRangeCompressionLine) and Dynamic range compression profile, RF mode (dynamicRangeCompressionRf). Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None (NONE) to leave out DRC signaling. Keep the default Film standard (FILM_STANDARD) to set the profile to Dolby's film standard profile for all operating modes.
                  • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                  • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                • AiffSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
                  • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                  • SampleRate (integer) -- Sample rate in hz.
                • Codec (string) -- Choose the audio codec for this output. Note that the option Dolby Digital passthrough (PASSTHROUGH) applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output
                • Eac3AtmosSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid values: 384k, 448k, 640k, 768k
                  • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
                  • DialogueIntelligence (string) -- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
                  • DynamicRangeCompressionLine (string) -- Specify the absolute peak level for a signal with dynamic range compression.
                  • DynamicRangeCompressionRf (string) -- Specify how the service limits the audio dynamic range when compressing the audio.
                  • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                  • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                  • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0.
                  • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel.
                  • MeteringMode (string) -- Choose how the service meters the loudness of your audio.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • SpeechThreshold (integer) -- Specify the percentage of audio content that must be speech before the encoder uses the measured speech loudness as the overall program loudness.
                  • StereoDownmix (string) -- Choose how the service does stereo downmixing.
                  • SurroundExMode (string) -- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
                • Eac3Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
                  • AttenuationControl (string) -- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.
                  • BitstreamMode (string) -- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
                  • CodingMode (string) -- Dolby Digital Plus coding mode. Determines number of channels.
                  • DcFilter (string) -- Activates a DC highpass filter for all input channels.
                  • Dialnorm (integer) -- Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
                  • DynamicRangeCompressionLine (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • DynamicRangeCompressionRf (string) -- Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
                  • LfeControl (string) -- When encoding 3/2 audio, controls whether the LFE channel is enabled
                  • LfeFilter (string) -- Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
                  • LoRoCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
                  • LoRoSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
                  • LtRtCenterMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
                  • LtRtSurroundMixLevel (float) -- Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
                  • MetadataControl (string) -- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
                  • PassthroughControl (string) -- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
                  • PhaseControl (string) -- Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
                  • SampleRate (integer) -- This value is always 48000. It represents the sample rate in Hz.
                  • StereoDownmix (string) -- Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
                  • SurroundExMode (string) -- When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
                  • SurroundMode (string) -- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
                • Mp2Settings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second.
                  • Channels (integer) -- Set Channels to specify the number of channels in this output audio track. Choosing Mono in the console will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.
                  • SampleRate (integer) -- Sample rate in hz.
                • Mp3Settings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
                  • Bitrate (integer) -- Specify the average bitrate in bits per second.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                  • RateControlMode (string) -- Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
                  • SampleRate (integer) -- Sample rate in hz.
                  • VbrQuality (integer) -- Required when you set Bitrate control mode (rateControlMode) to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).
                • OpusSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
                  • Bitrate (integer) -- Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.
                  • SampleRate (integer) -- Optional. Sample rate in hz. Valid values are 16000, 24000, and 48000. The default value is 48000.
                • VorbisSettings (dict) -- Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
                  • Channels (integer) -- Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.
                  • SampleRate (integer) -- Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.
                  • VbrQuality (integer) -- Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.
                • WavSettings (dict) -- Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
                  • BitDepth (integer) -- Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.
                  • Channels (integer) -- Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.
                  • Format (string) -- The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.
                  • SampleRate (integer) -- Sample rate in Hz.
              • CustomLanguageCode (string) -- Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control (AudioLanguageCodeControl) to Use configured (USE_CONFIGURED). The service also uses your specified custom language code when you set Language code control (AudioLanguageCodeControl) to Follow input (FOLLOW_INPUT), but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
              • LanguageCode (string) -- Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
              • LanguageCodeControl (string) -- Specify which source for language code takes precedence for this audio track. When you choose Follow input (FOLLOW_INPUT), the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code (languageCode or customLanguageCode). When you choose Use configured (USE_CONFIGURED), the service uses the language code that you specify.
              • RemixSettings (dict) -- Advanced audio remixing settings.
                • ChannelMapping (dict) -- Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
                  • OutputChannels (list) -- In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.
                    • (dict) -- OutputChannel mapping settings.
                      • InputChannels (list) -- Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.
                        • (integer) --
                      • InputChannelsFineTune (list) -- Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.
                        • (float) --
                • ChannelsIn (integer) -- Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
                • ChannelsOut (integer) -- Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.
              • StreamName (string) -- Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
          • CaptionDescriptions (list) -- This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.
            • (dict) -- Caption Description for preset
              • CustomLanguageCode (string) -- Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
              • DestinationSettings (dict) -- Settings related to one captions tab on the MediaConvert console. In your job JSON, an instance of captions DestinationSettings is equivalent to one captions tab in the console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.
                • BurninDestinationSettings (dict) -- Settings related to burn-in captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to BURN_IN.
                  • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                  • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                  • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                  • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering burn-in captions.
                  • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                  • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                  • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                  • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                  • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                  • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • DestinationType (string) -- Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded (SCTE20_PLUS_EMBEDDED). To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20 (EMBEDDED_PLUS_SCTE20).
                • DvbSubDestinationSettings (dict) -- Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to DVB_SUB.
                  • Alignment (string) -- If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the bottom center of the output. Similarly, setting a left alignment will align captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • BackgroundColor (string) -- Specifies the color of the rectangle behind the captions. All burn-in and DVB-Sub font settings must match.
                  • BackgroundOpacity (integer) -- Specifies the opacity of the background rectangle. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • FontColor (string) -- Specifies the color of the burned-in captions. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • FontOpacity (integer) -- Specifies the opacity of the burned-in captions. 255 is opaque; 0 is transparent. All burn-in and DVB-Sub font settings must match.
                  • FontResolution (integer) -- Font resolution in DPI (dots per inch); default is 96 dpi. All burn-in and DVB-Sub font settings must match.
                  • FontScript (string) -- Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset. This is used to help determine the appropriate font for rendering DVB-Sub captions.
                  • FontSize (integer) -- A positive integer indicates the exact font size in points. Set to 0 for automatic font size selection. All burn-in and DVB-Sub font settings must match.
                  • OutlineColor (string) -- Specifies font outline color. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • OutlineSize (integer) -- Specifies font outline size in pixels. This option is not valid for source captions that are either 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • ShadowColor (string) -- Specifies the color of the shadow cast by the captions. All burn-in and DVB-Sub font settings must match.
                  • ShadowOpacity (integer) -- Specifies the opacity of the shadow. 255 is opaque; 0 is transparent. Leaving this parameter blank is equivalent to setting it to 0 (transparent). All burn-in and DVB-Sub font settings must match.
                  • ShadowXOffset (integer) -- Specifies the horizontal offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. All burn-in and DVB-Sub font settings must match.
                  • ShadowYOffset (integer) -- Specifies the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. All burn-in and DVB-Sub font settings must match.
                  • SubtitlingType (string) -- Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.
                  • TeletextSpacing (string) -- Only applies to jobs with input captions in Teletext or STL formats. Specify whether the spacing between letters in your captions is set by the captions grid or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read if the captions are closed caption.
                  • XPosition (integer) -- Specifies the horizontal position of the caption relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                  • YPosition (integer) -- Specifies the vertical position of the caption relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. This option is not valid for source captions that are STL, 608/embedded or teletext. These source settings are already pre-defined by the caption stream. All burn-in and DVB-Sub font settings must match.
                • EmbeddedDestinationSettings (dict) -- Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to EMBEDDED, EMBEDDED_PLUS_SCTE20, or SCTE20_PLUS_EMBEDDED.
                  • Destination608ChannelNumber (integer) -- Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                  • Destination708ServiceNumber (integer) -- Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert (Convert608To708) to Upconvert (UPCONVERT) in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number (destination608ChannelNumber) for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.
                • ImscDestinationSettings (dict) -- Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to IMSC.
                  • StylePassthrough (string) -- Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.
                • SccDestinationSettings (dict) -- Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to SCC.
                  • Framerate (string) -- Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe (FRAMERATE_29_97_DROPFRAME) only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe (FRAMERATE_29_97_NON_DROPFRAME).
                • TeletextDestinationSettings (dict) -- Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TELETEXT.
                  • PageNumber (string) -- Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.
                  • PageTypes (list) -- Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle (PAGE_TYPE_SUBTITLE). If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.
                    • (string) -- A page type as defined in the standard ETSI EN 300 468, Table 94
                • TtmlDestinationSettings (dict) -- Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html. When you work directly in your JSON job specification, include this object and any required children when you set destinationType to TTML.
                  • StylePassthrough (string) -- Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.
                • WebvttDestinationSettings (dict) -- WEBVTT Destination Settings
                  • StylePassthrough (string) -- Choose Enabled (ENABLED) to have MediaConvert use the font style, color, and position information from the captions source in the input. Keep the default value, Disabled (DISABLED), for simplified output captions.
              • LanguageCode (string) -- Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.
              • LanguageDescription (string) -- Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.
          • ContainerSettings (dict) -- Container specific settings.
            • CmfcSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioGroupId (string) -- Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets (audioRenditionSets).
              • AudioRenditionSets (string) -- List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1, audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID (AudioGroupId) for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8
              • AudioTrackType (string) -- Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default (ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT) to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default (ALTERNATE_AUDIO_AUTO_SELECT) to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
              • DescriptiveVideoServiceFlag (string) -- Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag (FLAG), MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag (DONT_FLAG), MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.
              • IFrameOnlyManifest (string) -- Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude (EXCLUDE).
              • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
            • Container (string) -- Container for this output. Some containers require a container settings object. If not specified, the default object will be created.
            • F4vSettings (dict) -- Settings for F4v container
              • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
            • M2tsSettings (dict) -- MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container (ContainerType) is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.
              • AudioBufferModel (string) -- Selects between the DVB and ATSC buffer models for Dolby Digital audio.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
              • AudioPids (list) -- Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.
                • (integer) --
              • Bitrate (integer) -- Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.
              • BufferModel (string) -- Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
              • DvbNitSettings (dict) -- Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • NetworkId (integer) -- The numeric value placed in the Network Information Table (NIT).
                • NetworkName (string) -- The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.
                • NitInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • DvbSdtSettings (dict) -- Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • OutputSdt (string) -- Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.
                • SdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
                • ServiceName (string) -- The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
                • ServiceProviderName (string) -- The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.
              • DvbSubPids (list) -- Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.
                • (integer) --
              • DvbTdtSettings (dict) -- Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
                • TdtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • DvbTeletextPid (integer) -- Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.
              • EbpAudioInterval (string) -- When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
              • EbpPlacement (string) -- Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).
              • EsRateInPes (string) -- Controls whether to include the ES Rate field in the PES header.
              • ForceTsVideoEbpOrder (string) -- Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force (FORCE).
              • FragmentTime (float) -- The length, in seconds, of each fragment. Only used with EBP markers.
              • MaxPcrInterval (integer) -- Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
              • MinEbpInterval (integer) -- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.
              • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
              • NullPacketBitrate (float) -- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.
              • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.
              • PcrPid (integer) -- Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID (VideoPid).
              • PmtInterval (integer) -- Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.
              • PmtPid (integer) -- Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.
              • PrivateMetadataPid (integer) -- Specify the packet identifier (PID) of the private metadata stream. Default is 503.
              • ProgramNumber (integer) -- Use Program number (programNumber) to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
              • RateMode (string) -- When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.
              • Scte35Esam (dict) -- Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
                • Scte35EsamPid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.
              • Scte35Pid (integer) -- Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.
              • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE). Also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml). Also enable ESAM SCTE-35 (include the property scte35Esam).
              • SegmentationMarkers (string) -- Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.
              • SegmentationStyle (string) -- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.
              • SegmentationTime (float) -- Specify the length, in seconds, of each segment. Required unless markers is set to _none_.
              • TimedMetadataPid (integer) -- Specify the packet identifier (PID) for timed metadata in this output. Default is 502.
              • TransportStreamId (integer) -- Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.
              • VideoPid (integer) -- Specify the packet identifier (PID) of the elementary video stream in the transport stream.
            • M3u8Settings (dict) -- These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • AudioFramesPerPes (integer) -- The number of audio frames to insert for each PES packet.
              • AudioPids (list) -- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
                • (integer) --
              • NielsenId3 (string) -- If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.
              • PatInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PcrControl (string) -- When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.
              • PcrPid (integer) -- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.
              • PmtInterval (integer) -- The number of milliseconds between instances of this table in the output transport stream.
              • PmtPid (integer) -- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.
              • PrivateMetadataPid (integer) -- Packet Identifier (PID) of the private metadata stream in the transport stream.
              • ProgramNumber (integer) -- The value of the program number field in the Program Map Table.
              • Scte35Pid (integer) -- Packet Identifier (PID) of the SCTE-35 stream in the transport stream.
              • Scte35Source (string) -- For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).
              • TimedMetadata (string) -- Applies only to HLS outputs. Use this setting to specify whether the service inserts the ID3 timed metadata from the input in this output.
              • TimedMetadataPid (integer) -- Packet Identifier (PID) of the timed metadata stream in the transport stream.
              • TransportStreamId (integer) -- The value of the transport stream ID field in the Program Map Table.
              • VideoPid (integer) -- Packet Identifier (PID) of the elementary video stream in the transport stream.
            • MovSettings (dict) -- These settings relate to your QuickTime MOV output container.
              • ClapAtom (string) -- When enabled, include 'clap' atom if appropriate for the video output settings.
              • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
              • Mpeg2FourCCControl (string) -- When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.
              • PaddingControl (string) -- To make this output compatible with Omenon, keep the default value, OMNEON. Unless you need Omneon compatibility, set this value to NONE. When you keep the default value, OMNEON, MediaConvert increases the length of the edit list atom. This might cause file rejections when a recipient of the output file doesn't expct this extra padding.
              • Reference (string) -- Always keep the default value (SELF_CONTAINED) for this setting.
            • Mp4Settings (dict) -- These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • CslgAtom (string) -- When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.
              • CttsVersion (integer) -- Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom (cslgAtom) to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.
              • FreeSpaceBox (string) -- Inserts a free-space box immediately after the moov box.
              • MoovPlacement (string) -- If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for progressive downloading. Otherwise it is placed normally at the end.
              • Mp4MajorBrand (string) -- Overrides the "Major Brand" field in the output file. Usually not necessary to specify.
            • MpdSettings (dict) -- These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
              • AccessibilityCaptionHints (string) -- Optional. Choose Include (INCLUDE) to have MediaConvert mark up your DASH manifest with elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude (EXCLUDE), to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest:
              • AudioDuration (string) -- Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.
              • CaptionContainerType (string) -- Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw (RAW) for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 (FRAGMENTED_MP4) for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
              • Scte35Esam (string) -- Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
              • Scte35Source (string) -- Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want those SCTE-35 markers in this output.
            • MxfSettings (dict) -- These settings relate to your MXF output container.
              • AfdSignaling (string) -- Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy (NO_COPY) to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream (COPY_FROM_VIDEO) to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.
              • Profile (string) -- Specify the MXF profile, also called shim, for this output. When you choose Auto, MediaConvert chooses a profile based on the video codec and resolution. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.
          • VideoDescription (dict) -- VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.
            • AfdSignaling (string) -- This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling (AfdSignaling) to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.
            • AntiAlias (string) -- The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.
            • CodecSettings (dict) -- Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec (Codec). For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings
              • Av1Settings (dict) -- Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization (spatialAdaptiveQuantization).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • NumberBFramesBetweenReferenceFrames (integer) -- Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the AV1 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within av1Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- 'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'
                • Slices (integer) -- Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
              • AvcIntraSettings (dict) -- Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
                • AvcIntraClass (string) -- Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.
                • AvcIntraUhdSettings (dict) -- Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.
                  • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass (MULTI_PASS), your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass (SINGLE_PASS), your encoding time is faster. The default behavior is Single-pass (SINGLE_PASS).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Codec (string) -- Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec.
              • FrameCaptureSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
                • FramerateDenominator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.
                • FramerateNumerator (integer) -- Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.
                • MaxCaptures (integer) -- Maximum number of captures (encoded jpg output files).
                • Quality (integer) -- JPEG Quality - a higher value equals higher quality.
              • H264Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
                • AdaptiveQuantization (string) -- Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto (AUTO). Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization (H264AdaptiveQuantization) to Off (OFF). Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
                • CodecProfile (string) -- H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • EntropyEncoding (string) -- Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
                • FieldEncoding (string) -- Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
                • FlickerAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h264Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                • RepeatPps (string) -- Places a PPS header on each encoded picture, even if repeated.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                • SpatialAdaptiveQuantization (string) -- Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (H264AdaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • Syntax (string) -- Produces a bitstream compliant with SMPTE RP-2027.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • TemporalAdaptiveQuantization (string) -- Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization). To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization (H264AdaptiveQuantization) to a value other than AUTO.
                • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
              • H265Settings (dict) -- Settings for H265 codec
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                • AlternateTransferFunctionSei (string) -- Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- H.265 Level.
                • CodecProfile (string) -- Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • FlickerAdaptiveQuantization (string) -- Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopBReference (string) -- If enable, use reference B frames for GOP structures that have B frames > 1.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in H265 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • NumberReferenceFrames (integer) -- Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • QvbrSettings (dict) -- Settings for quality-defined variable bitrate encoding with the H.265 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
                  • MaxAverageBitrate (integer) -- Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.
                  • QvbrQualityLevel (integer) -- Required when you use QVBR rate control mode. That is, when you specify qvbrSettings within h265Settings. Specify the general target quality level for this output, from 1 to 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.
                  • QvbrQualityLevelFineTune (float) -- Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.
                • RateControlMode (string) -- Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
                • SampleAdaptiveOffsetFilterMode (string) -- Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
                • Slices (integer) -- Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • Telecine (string) -- This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
                • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
                • TemporalIds (string) -- Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
                • Tiles (string) -- Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
                • UnregisteredSeiTimecode (string) -- Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
                • WriteMp4PackagingType (string) -- If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
              • Mpeg2Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
                • AdaptiveQuantization (string) -- Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization (spatialAdaptiveQuantization), and Temporal adaptive quantization (temporalAdaptiveQuantization).
                • Bitrate (integer) -- Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
                • CodecLevel (string) -- Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
                • CodecProfile (string) -- Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
                • DynamicSubGop (string) -- Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopClosedCadence (integer) -- Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
                • GopSize (float) -- GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
                • GopSizeUnits (string) -- Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
                • HrdBufferInitialFillPercentage (integer) -- Percentage of the buffer that should initially be filled (HRD buffer model).
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • IntraDcPrecision (string) -- Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.
                • MaxBitrate (integer) -- Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • MinIInterval (integer) -- Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
                • NumberBFramesBetweenReferenceFrames (integer) -- Number of B-frames between reference frames.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
                • RateControlMode (string) -- Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SceneChangeDetect (string) -- Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Softness (integer) -- Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness (sharpness) or by enabling a noise reducer filter (noiseReducerFilter). The Softness (softness) setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.
                • SpatialAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
                • Syntax (string) -- Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 (D_10) for your MXF profile (profile), you must also set this value to to D10 (D_10).
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT) produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • TemporalAdaptiveQuantization (string) -- Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).
              • ProresSettings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
                • CodecProfile (string) -- Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
              • Vc3Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • InterlaceMode (string) -- Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.
                • ScanTypeConversionMode (string) -- Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).
                • SlowPal (string) -- Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.
                • Telecine (string) -- When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.
                • Vc3Class (string) -- Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.
              • Vp8Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
                • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                • HrdBufferSize (integer) -- Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                • RateControlMode (string) -- With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
              • Vp9Settings (dict) -- Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
                • Bitrate (integer) -- Target bitrate in bits/second. For example, enter five megabits per second as 5000000.
                • FramerateControl (string) -- If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
                • FramerateConversionAlgorithm (string) -- Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.
                • FramerateDenominator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • FramerateNumerator (integer) -- When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
                • GopSize (float) -- GOP Length (keyframe interval) in frames. Must be greater than zero.
                • HrdBufferSize (integer) -- Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
                • MaxBitrate (integer) -- Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.
                • ParControl (string) -- Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.
                • ParDenominator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
                • ParNumerator (integer) -- Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
                • QualityTuningLevel (string) -- Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.
                • RateControlMode (string) -- With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
            • ColorMetadata (string) -- Choose Insert (INSERT) for this setting to include color metadata in this output. Choose Ignore (IGNORE) to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.
            • Crop (dict) -- Use Cropping selection (crop) to specify the video area that the service will include in the output video frame.
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • DropFrameTimecode (string) -- Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion (TimecodeInsertion) is enabled.
            • FixedAfd (integer) -- Applies only if you set AFD Signaling(AfdSignaling) to Fixed (FIXED). Use Fixed (FixedAfd) to specify a four-bit AFD value which the service will write on all frames of this video output.
            • Height (integer) -- Use the Height (Height) setting to define the video resolution height for this output. Specify in pixels. If you don't provide a value here, the service will use the input height.
            • Position (dict) -- Use Selection placement (position) to define the video area in your output frame. The area outside of the rectangle that you specify here is black.
              • Height (integer) -- Height of rectangle in pixels. Specify only even numbers.
              • Width (integer) -- Width of rectangle in pixels. Specify only even numbers.
              • X (integer) -- The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.
              • Y (integer) -- The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.
            • RespondToAfd (string) -- Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to (NONE). A preferred implementation of this workflow is to set RespondToAfd to (NONE) and set AfdSignaling to (AUTO). * Choose None to remove all input AFD values from this output.
            • ScalingBehavior (string) -- Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio. Choose Stretch to output (STRETCH_TO_OUTPUT) to have the service stretch your video image to fit. Keep the setting Default (DEFAULT) to have the service letterbox your video instead. This setting overrides any value that you specify for the setting Selection placement (position) in this output.
            • Sharpness (integer) -- Use Sharpness (Sharpness) setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.
            • TimecodeInsertion (string) -- Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion (VideoTimecodeInsertion) to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration (TimecodeConfig). In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings (InputTimecodeSource) does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration (TimecodeSource) does.
            • VideoPreprocessors (dict) -- Find additional transcoding features under Preprocessors (VideoPreprocessors). Enable the features at each output individually. These features are disabled by default.
              • ColorCorrector (dict) -- Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.
                • Brightness (integer) -- Brightness level.
                • ColorSpaceConversion (string) -- Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses Elemental tone mapping technology to approximate the outcome of manually regrading from HDR to SDR.
                • Contrast (integer) -- Contrast level.
                • Hdr10Metadata (dict) -- Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion (ColorSpaceConversion) to HDR 10 (FORCE_HDR10), these settings are required. You must set values for Max frame average light level (maxFrameAverageLightLevel) and Max content light level (maxContentLightLevel); these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.
                  • BluePrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • BluePrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • GreenPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • MaxContentLightLevel (integer) -- Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxFrameAverageLightLevel (integer) -- Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.
                  • MaxLuminance (integer) -- Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.
                  • MinLuminance (integer) -- Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter
                  • RedPrimaryX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • RedPrimaryY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointX (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                  • WhitePointY (integer) -- HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.
                • Hue (integer) -- Hue in degrees.
                • Saturation (integer) -- Saturation level.
              • Deinterlacer (dict) -- Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.
                • Algorithm (string) -- Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE). Motion adaptive interpolate (INTERPOLATE) produces sharper pictures, while blend (BLEND) produces smoother motion. Use (INTERPOLATE_TICKER) OR (BLEND_TICKER) if your source file includes a ticker, such as a scrolling headline at the bottom of the frame.
                • Control (string) -- - When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.
                • Mode (string) -- Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.
              • DolbyVision (dict) -- Enable Dolby Vision feature to produce Dolby Vision compatible video output.
                • L6Metadata (dict) -- Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.
                  • MaxCll (integer) -- Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.
                  • MaxFall (integer) -- Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.
                • L6Mode (string) -- Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
                • Profile (string) -- In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5). Therefore, all of your inputs must contain Dolby Vision frame interleaved data.
              • ImageInserter (dict) -- Enable the Image inserter (ImageInserter) feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.
                • InsertableImages (list) -- Specify the images that you want to overlay on your video. The images must be PNG or TGA files.
                  • (dict) -- These settings apply to a specific graphic overlay. You can include multiple overlays in your job.
                    • Duration (integer) -- Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.
                    • FadeIn (integer) -- Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.
                    • FadeOut (integer) -- Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.
                    • Height (integer) -- Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.
                    • ImageInserterInput (string) -- Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.
                    • ImageX (integer) -- Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.
                    • ImageY (integer) -- Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.
                    • Layer (integer) -- Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.
                    • Opacity (integer) -- Use Opacity (Opacity) to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.
                    • StartTime (string) -- Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.
                    • Width (integer) -- Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.
              • NoiseReducer (dict) -- Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default.
                • Filter (string) -- Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer (NoiseReducer). * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.
                • FilterSettings (dict) -- Settings for a noise reducer filter
                  • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                • SpatialFilterSettings (dict) -- Noise reducer filter settings for spatial filter.
                  • PostFilterSharpenStrength (integer) -- Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.
                  • Speed (integer) -- The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.
                  • Strength (integer) -- Relative strength of noise reducing filter. Higher values produce stronger filtering.
                • TemporalFilterSettings (dict) -- Noise reducer filter settings for temporal filter.
                  • AggressiveMode (integer) -- Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.
                  • PostTemporalSharpening (string) -- Optional. When you set Noise reducer (noiseReducer) to Temporal (TEMPORAL), you can use this setting to apply sharpening. The default behavior, Auto (AUTO), allows the transcoder to determine whether to apply filtering, depending on input type and quality. When you set Noise reducer to Temporal, your output bandwidth is reduced. When Post temporal sharpening is also enabled, that bandwidth reduction is smaller.
                  • Speed (integer) -- The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.
                  • Strength (integer) -- Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction
              • PartnerWatermarking (dict) -- If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.
                • NexguardFileMarkerSettings (dict) -- For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.
                  • License (string) -- Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                  • Payload (integer) -- Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID (payload) to 0 in every output. For the other output group, set Payload ID (payload) to 1 in every output.
                  • Preset (string) -- Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking (NexGuardWatermarkingSettings) in your job.
                  • Strength (string) -- Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.
              • TimecodeBurnin (dict) -- Settings for burning the output timecode and specified prefix into the output.
                • FontSize (integer) -- Use Font Size (FontSize) to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.
                • Position (string) -- Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode on output video.
                • Prefix (string) -- Use Prefix (Prefix) to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.
            • Width (integer) -- Use Width (Width) to define the video resolution width, in pixels, for this output. If you don't provide a value here, the service will use the input width.
        • Type (string) -- A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

class MediaConvert.Paginator.ListQueues
paginator = client.get_paginator('list_queues')
paginate(**kwargs)

Creates an iterator that will paginate through responses from MediaConvert.Client.list_queues().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    ListBy='NAME'|'CREATION_DATE',
    Order='ASCENDING'|'DESCENDING',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • ListBy (string) -- Optional. When you request a list of queues, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by creation date.
  • Order (string) -- Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Queues': [
        {
            'Arn': 'string',
            'CreatedAt': datetime(2015, 1, 1),
            'Description': 'string',
            'LastUpdated': datetime(2015, 1, 1),
            'Name': 'string',
            'PricingPlan': 'ON_DEMAND'|'RESERVED',
            'ProgressingJobsCount': 123,
            'ReservationPlan': {
                'Commitment': 'ONE_YEAR',
                'ExpiresAt': datetime(2015, 1, 1),
                'PurchasedAt': datetime(2015, 1, 1),
                'RenewalType': 'AUTO_RENEW'|'EXPIRE',
                'ReservedSlots': 123,
                'Status': 'ACTIVE'|'EXPIRED'
            },
            'Status': 'ACTIVE'|'PAUSED',
            'SubmittedJobsCount': 123,
            'Type': 'SYSTEM'|'CUSTOM'
        },
    ]
}

Response Structure

  • (dict) --
    • Queues (list) -- List of queues.
      • (dict) -- You can use queues to manage the resources that are available to your AWS account for running multiple transcoding jobs at the same time. If you don't specify a queue, the service sends all jobs through the default queue. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-queues.html.
        • Arn (string) -- An identifier for this resource that is unique within all of AWS.
        • CreatedAt (datetime) -- The timestamp in epoch seconds for when you created the queue.
        • Description (string) -- An optional description that you create for each queue.
        • LastUpdated (datetime) -- The timestamp in epoch seconds for when you most recently updated the queue.
        • Name (string) -- A name that you create for each queue. Each name must be unique within your account.
        • PricingPlan (string) -- Specifies whether the pricing plan for the queue is on-demand or reserved. For on-demand, you pay per minute, billed in increments of .01 minute. For reserved, you pay for the transcoding capacity of the entire queue, regardless of how much or how little you use it. Reserved pricing requires a 12-month commitment.
        • ProgressingJobsCount (integer) -- The estimated number of jobs with a PROGRESSING status.
        • ReservationPlan (dict) -- Details about the pricing plan for your reserved queue. Required for reserved queues and not applicable to on-demand queues.
          • Commitment (string) -- The length of the term of your reserved queue pricing plan commitment.
          • ExpiresAt (datetime) -- The timestamp in epoch seconds for when the current pricing plan term for this reserved queue expires.
          • PurchasedAt (datetime) -- The timestamp in epoch seconds for when you set up the current pricing plan for this reserved queue.
          • RenewalType (string) -- Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires (EXPIRE) at the end of the term.
          • ReservedSlots (integer) -- Specifies the number of reserved transcode slots (RTS) for this queue. The number of RTS determines how many jobs the queue can process in parallel; each RTS can process one job at a time. When you increase this number, you extend your existing commitment with a new 12-month commitment for a larger number of RTS. The new commitment begins when you purchase the additional capacity. You can't decrease the number of RTS in your reserved queue.
          • Status (string) -- Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
        • Status (string) -- Queues can be ACTIVE or PAUSED. If you pause a queue, the service won't begin processing jobs in that queue. Jobs that are running when you pause the queue continue to run until they finish or result in an error.
        • SubmittedJobsCount (integer) -- The estimated number of jobs with a SUBMITTED status.
        • Type (string) -- Specifies whether this on-demand queue is system or custom. System queues are built in. You can't modify or delete system queues. You can create and modify custom queues.