Table of Contents
SecurityHub.Client¶A low-level client representing AWS SecurityHub
Security Hub provides you with a comprehensive view of the security state of your Amazon Web Services environment and resources. It also provides you with the readiness status of your environment based on controls from supported security standards. Security Hub collects security data from Amazon Web Services accounts, services, and integrated third-party products and helps you analyze security trends in your environment to identify the highest priority security issues. For more information about Security Hub, see the ` Security HubUser Guide https://docs.aws.amazon.com/securityhub/latest/userguide/what-is-securityhub.html`__ .
When you use operations in the Security Hub API, the requests are executed only in the Amazon Web Services Region that is currently active or in the specific Amazon Web Services Region that you specify in your request. Any configuration or settings change that results from the operation is applied only to that Region. To make the same change in other Regions, execute the same command for each Region to apply the change to.
For example, if your Region is set to us-west-2 , when you use CreateMembers to add a member account to Security Hub, the association of the member account with the administrator account is created only in the us-west-2 Region. Security Hub must be enabled for the member account in the same Region that the invitation was sent from.
The following throttling limits apply to using Security Hub API operations.
BatchEnableStandards - RateLimit of 1 request per second, BurstLimit of 1 request per second.GetFindings - RateLimit of 3 requests per second. BurstLimit of 6 requests per second.BatchImportFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.BatchUpdateFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.UpdateStandardsControl - RateLimit of 1 request per second, BurstLimit of 5 requests per second.RateLimit of 10 requests per second. BurstLimit of 30 requests per second.import boto3
client = boto3.client('securityhub')
These are the available methods:
accept_administrator_invitation()accept_invitation()batch_disable_standards()batch_enable_standards()batch_import_findings()batch_update_findings()can_paginate()close()create_action_target()create_finding_aggregator()create_insight()create_members()decline_invitations()delete_action_target()delete_finding_aggregator()delete_insight()delete_invitations()delete_members()describe_action_targets()describe_hub()describe_organization_configuration()describe_products()describe_standards()describe_standards_controls()disable_import_findings_for_product()disable_organization_admin_account()disable_security_hub()disassociate_from_administrator_account()disassociate_from_master_account()disassociate_members()enable_import_findings_for_product()enable_organization_admin_account()enable_security_hub()get_administrator_account()get_enabled_standards()get_finding_aggregator()get_findings()get_insight_results()get_insights()get_invitations_count()get_master_account()get_members()get_paginator()get_waiter()invite_members()list_enabled_products_for_import()list_finding_aggregators()list_invitations()list_members()list_organization_admin_accounts()list_tags_for_resource()tag_resource()untag_resource()update_action_target()update_finding_aggregator()update_findings()update_insight()update_organization_configuration()update_security_hub_configuration()update_standards_control()accept_administrator_invitation(**kwargs)¶Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
This operation is only used by member accounts that are not added through Organizations.
When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
See also: AWS API Documentation
Request Syntax
response = client.accept_administrator_invitation(
AdministratorId='string',
InvitationId='string'
)
[REQUIRED]
The account ID of the Security Hub administrator account that sent the invitation.
[REQUIRED]
The identifier of the invitation sent from the Security Hub administrator account.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionaccept_invitation(**kwargs)¶This method is deprecated. Instead, use AcceptAdministratorInvitation .
The Security Hub console continues to use AcceptInvitation . It will eventually change to use AcceptAdministratorInvitation . Any IAM policies that specifically control access to this function must continue to use AcceptInvitation . You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation .
Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
This operation is only used by member accounts that are not added through Organizations.
When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.accept_invitation(
MasterId='string',
InvitationId='string'
)
[REQUIRED]
The account ID of the Security Hub administrator account that sent the invitation.
[REQUIRED]
The identifier of the invitation sent from the Security Hub administrator account.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionbatch_disable_standards(**kwargs)¶Disables the standards specified by the provided StandardsSubscriptionArns .
For more information, see Security Standards section of the Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.batch_disable_standards(
StandardsSubscriptionArns=[
'string',
]
)
[REQUIRED]
The ARNs of the standards subscriptions to disable.
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE',
'StandardsStatusReason': {
'StatusReasonCode': 'NO_AVAILABLE_CONFIGURATION_RECORDER'|'INTERNAL_ERROR'
}
},
]
}
Response Structure
The details of the standards subscriptions that were disabled.
A resource that represents your subscription to a supported standard.
The ARN of a resource that represents your subscription to a supported standard.
The ARN of a standard.
A key-value pair of input for the standard.
The status of the standard subscription.
The status values are as follows:
PENDING - Standard is in the process of being enabled.READY - Standard is enabled.INCOMPLETE - Standard could not be enabled completely. Some controls may not be available.DELETING - Standard is in the process of being disabled.FAILED - Standard could not be disabled.The reason for the current status.
The reason code that represents the reason for the current status of a standard subscription.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionbatch_enable_standards(**kwargs)¶Enables the standards specified by the provided StandardsArn . To obtain the ARN for a standard, use the DescribeStandards operation.
For more information, see the Security Standards section of the Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.batch_enable_standards(
StandardsSubscriptionRequests=[
{
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
}
},
]
)
[REQUIRED]
The list of standards checks to enable.
The standard that you want to enable.
The ARN of the standard that you want to enable. To view the list of available standards and their ARNs, use the DescribeStandards operation.
A key-value pair of input for the standard.
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE',
'StandardsStatusReason': {
'StatusReasonCode': 'NO_AVAILABLE_CONFIGURATION_RECORDER'|'INTERNAL_ERROR'
}
},
]
}
Response Structure
The details of the standards subscriptions that were enabled.
A resource that represents your subscription to a supported standard.
The ARN of a resource that represents your subscription to a supported standard.
The ARN of a standard.
A key-value pair of input for the standard.
The status of the standard subscription.
The status values are as follows:
PENDING - Standard is in the process of being enabled.READY - Standard is enabled.INCOMPLETE - Standard could not be enabled completely. Some controls may not be available.DELETING - Standard is in the process of being disabled.FAILED - Standard could not be disabled.The reason for the current status.
The reason code that represents the reason for the current status of a standard subscription.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionbatch_import_findings(**kwargs)¶Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.
BatchImportFindingsmust be called by one of the following:
BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding.BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch.The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
NoteUserDefinedFieldsVerificationStateWorkflowFinding providers also should not use BatchImportFindings to update the following attributes.
ConfidenceCriticalityRelatedFindingsSeverityTypesInstead, finding providers use FindingProviderFields to provide values for these attributes.
See also: AWS API Documentation
Request Syntax
response = client.batch_import_findings(
Findings=[
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Region': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'Threats': [
{
'Name': 'string',
'Severity': 'string',
'ItemCount': 123,
'FilePaths': [
{
'FilePath': 'string',
'FileName': 'string',
'ResourceId': 'string',
'Hash': 'string'
},
]
},
],
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'ResourceRole': 'string',
'Tags': {
'string': 'string'
},
'DataClassification': {
'DetailedResultsLocation': 'string',
'Result': {
'MimeType': 'string',
'SizeClassified': 123,
'AdditionalOccurrences': True|False,
'Status': {
'Code': 'string',
'Reason': 'string'
},
'SensitiveData': [
{
'Category': 'string',
'Detections': [
{
'Count': 123,
'Type': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
},
],
'CustomDataIdentifiers': {
'Detections': [
{
'Count': 123,
'Arn': 'string',
'Name': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
}
}
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string',
'MixedInstancesPolicy': {
'InstancesDistribution': {
'OnDemandAllocationStrategy': 'string',
'OnDemandBaseCapacity': 123,
'OnDemandPercentageAboveBaseCapacity': 123,
'SpotAllocationStrategy': 'string',
'SpotInstancePools': 123,
'SpotMaxPrice': 'string'
},
'LaunchTemplate': {
'LaunchTemplateSpecification': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'Overrides': [
{
'InstanceType': 'string',
'WeightedCapacity': 'string'
},
]
}
},
'AvailabilityZones': [
{
'Value': 'string'
},
],
'LaunchTemplate': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'CapacityRebalance': True|False
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Artifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
],
'Environment': {
'Certificate': 'string',
'EnvironmentVariables': [
{
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
],
'PrivilegedMode': True|False,
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'LogsConfig': {
'CloudWatchLogs': {
'GroupName': 'string',
'Status': 'string',
'StreamName': 'string'
},
'S3Logs': {
'EncryptionDisabled': True|False,
'Location': 'string',
'Status': 'string'
}
},
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'SecondaryArtifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
]
},
'AwsCloudFrontDistribution': {
'CacheBehaviors': {
'Items': [
{
'ViewerProtocolPolicy': 'string'
},
]
},
'DefaultCacheBehavior': {
'ViewerProtocolPolicy': 'string'
},
'DefaultRootObject': 'string',
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string',
'S3OriginConfig': {
'OriginAccessIdentity': 'string'
},
'CustomOriginConfig': {
'HttpPort': 123,
'HttpsPort': 123,
'OriginKeepaliveTimeout': 123,
'OriginProtocolPolicy': 'string',
'OriginReadTimeout': 123,
'OriginSslProtocols': {
'Items': [
'string',
],
'Quantity': 123
}
}
},
]
},
'OriginGroups': {
'Items': [
{
'FailoverCriteria': {
'StatusCodes': {
'Items': [
123,
],
'Quantity': 123
}
}
},
]
},
'ViewerCertificate': {
'AcmCertificateArn': 'string',
'Certificate': 'string',
'CertificateSource': 'string',
'CloudFrontDefaultCertificate': True|False,
'IamCertificateId': 'string',
'MinimumProtocolVersion': 'string',
'SslSupportMethod': 'string'
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string',
'NetworkInterfaces': [
{
'NetworkInterfaceId': 'string'
},
],
'VirtualizationType': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpProtocolIpv6': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string',
'InstanceMetadataTags': 'string'
}
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False,
'IpV6Addresses': [
{
'IpV6Address': 'string'
},
],
'PrivateIpAddresses': [
{
'PrivateIpAddress': 'string',
'PrivateDnsName': 'string'
},
],
'PublicDnsName': 'string',
'PublicIp': 'string'
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'DeviceName': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
],
'VolumeId': 'string',
'VolumeType': 'string',
'VolumeScanStatus': 'string'
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsEc2Eip': {
'InstanceId': 'string',
'PublicIp': 'string',
'AllocationId': 'string',
'AssociationId': 'string',
'Domain': 'string',
'PublicIpv4Pool': 'string',
'NetworkBorderGroup': 'string',
'NetworkInterfaceId': 'string',
'NetworkInterfaceOwnerId': 'string',
'PrivateIpAddress': 'string'
},
'AwsEc2Subnet': {
'AssignIpv6AddressOnCreation': True|False,
'AvailabilityZone': 'string',
'AvailabilityZoneId': 'string',
'AvailableIpAddressCount': 123,
'CidrBlock': 'string',
'DefaultForAz': True|False,
'MapPublicIpOnLaunch': True|False,
'OwnerId': 'string',
'State': 'string',
'SubnetArn': 'string',
'SubnetId': 'string',
'VpcId': 'string',
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
]
},
'AwsEc2NetworkAcl': {
'IsDefault': True|False,
'NetworkAclId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'Associations': [
{
'NetworkAclAssociationId': 'string',
'NetworkAclId': 'string',
'SubnetId': 'string'
},
],
'Entries': [
{
'CidrBlock': 'string',
'Egress': True|False,
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Ipv6CidrBlock': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'Protocol': 'string',
'RuleAction': 'string',
'RuleNumber': 123
},
]
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string',
'LoadBalancerAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'AwsElasticBeanstalkEnvironment': {
'ApplicationName': 'string',
'Cname': 'string',
'DateCreated': 'string',
'DateUpdated': 'string',
'Description': 'string',
'EndpointUrl': 'string',
'EnvironmentArn': 'string',
'EnvironmentId': 'string',
'EnvironmentLinks': [
{
'EnvironmentName': 'string',
'LinkName': 'string'
},
],
'EnvironmentName': 'string',
'OptionSettings': [
{
'Namespace': 'string',
'OptionName': 'string',
'ResourceName': 'string',
'Value': 'string'
},
],
'PlatformArn': 'string',
'SolutionStackName': 'string',
'Status': 'string',
'Tier': {
'Name': 'string',
'Type': 'string',
'Version': 'string'
},
'VersionLabel': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'ElasticsearchClusterConfig': {
'DedicatedMasterCount': 123,
'DedicatedMasterEnabled': True|False,
'DedicatedMasterType': 'string',
'InstanceCount': 123,
'InstanceType': 'string',
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'ZoneAwarenessEnabled': True|False
},
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string'
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'OwnerAccountId': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
},
'BucketLifecycleConfiguration': {
'Rules': [
{
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
},
'ExpirationDate': 'string',
'ExpirationInDays': 123,
'ExpiredObjectDeleteMarker': True|False,
'Filter': {
'Predicate': {
'Operands': [
{
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
},
],
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
}
},
'ID': 'string',
'NoncurrentVersionExpirationInDays': 123,
'NoncurrentVersionTransitions': [
{
'Days': 123,
'StorageClass': 'string'
},
],
'Prefix': 'string',
'Status': 'string',
'Transitions': [
{
'Date': 'string',
'Days': 123,
'StorageClass': 'string'
},
]
},
]
},
'PublicAccessBlockConfiguration': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AccessControlList': 'string',
'BucketLoggingConfiguration': {
'DestinationBucketName': 'string',
'LogFilePrefix': 'string'
},
'BucketWebsiteConfiguration': {
'ErrorDocument': 'string',
'IndexDocumentSuffix': 'string',
'RedirectAllRequestsTo': {
'Hostname': 'string',
'Protocol': 'string'
},
'RoutingRules': [
{
'Condition': {
'HttpErrorCodeReturnedEquals': 'string',
'KeyPrefixEquals': 'string'
},
'Redirect': {
'Hostname': 'string',
'HttpRedirectCode': 'string',
'Protocol': 'string',
'ReplaceKeyPrefixWith': 'string',
'ReplaceKeyWith': 'string'
}
},
]
},
'BucketNotificationConfiguration': {
'Configurations': [
{
'Events': [
'string',
],
'Filter': {
'S3KeyFilter': {
'FilterRules': [
{
'Name': 'Prefix'|'Suffix',
'Value': 'string'
},
]
}
},
'Destination': 'string',
'Type': 'string'
},
]
},
'BucketVersioningConfiguration': {
'IsMfaDeleteEnabled': True|False,
'Status': 'string'
}
},
'AwsS3AccountPublicAccessBlock': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsSecretsManagerSecret': {
'RotationRules': {
'AutomaticallyAfterDays': 123
},
'RotationOccurredWithinFrequency': True|False,
'KmsKeyId': 'string',
'RotationEnabled': True|False,
'RotationLambdaArn': 'string',
'Deleted': True|False,
'Name': 'string',
'Description': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string',
'AccountId': 'string',
'AccessKeyId': 'string',
'SessionContext': {
'Attributes': {
'MfaAuthenticated': True|False,
'CreationDate': 'string'
},
'SessionIssuer': {
'Type': 'string',
'PrincipalId': 'string',
'Arn': 'string',
'AccountId': 'string',
'UserName': 'string'
}
}
},
'AwsIamUser': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupList': [
'string',
],
'Path': 'string',
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'UserId': 'string',
'UserName': 'string',
'UserPolicyList': [
{
'PolicyName': 'string'
},
]
},
'AwsIamPolicy': {
'AttachmentCount': 123,
'CreateDate': 'string',
'DefaultVersionId': 'string',
'Description': 'string',
'IsAttachable': True|False,
'Path': 'string',
'PermissionsBoundaryUsageCount': 123,
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyVersionList': [
{
'VersionId': 'string',
'IsDefaultVersion': True|False,
'CreateDate': 'string'
},
],
'UpdateDate': 'string'
},
'AwsApiGatewayV2Stage': {
'ClientCertificateId': 'string',
'CreatedDate': 'string',
'Description': 'string',
'DefaultRouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'DeploymentId': 'string',
'LastUpdatedDate': 'string',
'RouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'StageName': 'string',
'StageVariables': {
'string': 'string'
},
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'AutoDeploy': True|False,
'LastDeploymentStatusMessage': 'string',
'ApiGatewayManaged': True|False
},
'AwsApiGatewayV2Api': {
'ApiEndpoint': 'string',
'ApiId': 'string',
'ApiKeySelectionExpression': 'string',
'CreatedDate': 'string',
'Description': 'string',
'Version': 'string',
'Name': 'string',
'ProtocolType': 'string',
'RouteSelectionExpression': 'string',
'CorsConfiguration': {
'AllowOrigins': [
'string',
],
'AllowCredentials': True|False,
'ExposeHeaders': [
'string',
],
'MaxAge': 123,
'AllowMethods': [
'string',
],
'AllowHeaders': [
'string',
]
}
},
'AwsDynamoDbTable': {
'AttributeDefinitions': [
{
'AttributeName': 'string',
'AttributeType': 'string'
},
],
'BillingModeSummary': {
'BillingMode': 'string',
'LastUpdateToPayPerRequestDateTime': 'string'
},
'CreationDateTime': 'string',
'GlobalSecondaryIndexes': [
{
'Backfilling': True|False,
'IndexArn': 'string',
'IndexName': 'string',
'IndexSizeBytes': 123,
'IndexStatus': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
},
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
}
},
],
'GlobalTableVersion': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'LatestStreamArn': 'string',
'LatestStreamLabel': 'string',
'LocalSecondaryIndexes': [
{
'IndexArn': 'string',
'IndexName': 'string',
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
}
},
],
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
},
'Replicas': [
{
'GlobalSecondaryIndexes': [
{
'IndexName': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
}
},
],
'KmsMasterKeyId': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
},
'RegionName': 'string',
'ReplicaStatus': 'string',
'ReplicaStatusDescription': 'string'
},
],
'RestoreSummary': {
'SourceBackupArn': 'string',
'SourceTableArn': 'string',
'RestoreDateTime': 'string',
'RestoreInProgress': True|False
},
'SseDescription': {
'InaccessibleEncryptionDateTime': 'string',
'Status': 'string',
'SseType': 'string',
'KmsMasterKeyArn': 'string'
},
'StreamSpecification': {
'StreamEnabled': True|False,
'StreamViewType': 'string'
},
'TableId': 'string',
'TableName': 'string',
'TableSizeBytes': 123,
'TableStatus': 'string'
},
'AwsApiGatewayStage': {
'DeploymentId': 'string',
'ClientCertificateId': 'string',
'StageName': 'string',
'Description': 'string',
'CacheClusterEnabled': True|False,
'CacheClusterSize': 'string',
'CacheClusterStatus': 'string',
'MethodSettings': [
{
'MetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0,
'CachingEnabled': True|False,
'CacheTtlInSeconds': 123,
'CacheDataEncrypted': True|False,
'RequireAuthorizationForCacheControl': True|False,
'UnauthorizedCacheControlHeaderStrategy': 'string',
'HttpMethod': 'string',
'ResourcePath': 'string'
},
],
'Variables': {
'string': 'string'
},
'DocumentationVersion': 'string',
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'CanarySettings': {
'PercentTraffic': 123.0,
'DeploymentId': 'string',
'StageVariableOverrides': {
'string': 'string'
},
'UseStageCache': True|False
},
'TracingEnabled': True|False,
'CreatedDate': 'string',
'LastUpdatedDate': 'string',
'WebAclArn': 'string'
},
'AwsApiGatewayRestApi': {
'Id': 'string',
'Name': 'string',
'Description': 'string',
'CreatedDate': 'string',
'Version': 'string',
'BinaryMediaTypes': [
'string',
],
'MinimumCompressionSize': 123,
'ApiKeySource': 'string',
'EndpointConfiguration': {
'Types': [
'string',
]
}
},
'AwsCloudTrailTrail': {
'CloudWatchLogsLogGroupArn': 'string',
'CloudWatchLogsRoleArn': 'string',
'HasCustomEventSelectors': True|False,
'HomeRegion': 'string',
'IncludeGlobalServiceEvents': True|False,
'IsMultiRegionTrail': True|False,
'IsOrganizationTrail': True|False,
'KmsKeyId': 'string',
'LogFileValidationEnabled': True|False,
'Name': 'string',
'S3BucketName': 'string',
'S3KeyPrefix': 'string',
'SnsTopicArn': 'string',
'SnsTopicName': 'string',
'TrailArn': 'string'
},
'AwsSsmPatchCompliance': {
'Patch': {
'ComplianceSummary': {
'Status': 'string',
'CompliantCriticalCount': 123,
'CompliantHighCount': 123,
'CompliantMediumCount': 123,
'ExecutionType': 'string',
'NonCompliantCriticalCount': 123,
'CompliantInformationalCount': 123,
'NonCompliantInformationalCount': 123,
'CompliantUnspecifiedCount': 123,
'NonCompliantLowCount': 123,
'NonCompliantHighCount': 123,
'CompliantLowCount': 123,
'ComplianceType': 'string',
'PatchBaselineId': 'string',
'OverallSeverity': 'string',
'NonCompliantMediumCount': 123,
'NonCompliantUnspecifiedCount': 123,
'PatchGroup': 'string'
}
}
},
'AwsCertificateManagerCertificate': {
'CertificateAuthorityArn': 'string',
'CreatedAt': 'string',
'DomainName': 'string',
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'ExtendedKeyUsages': [
{
'Name': 'string',
'OId': 'string'
},
],
'FailureReason': 'string',
'ImportedAt': 'string',
'InUseBy': [
'string',
],
'IssuedAt': 'string',
'Issuer': 'string',
'KeyAlgorithm': 'string',
'KeyUsages': [
{
'Name': 'string'
},
],
'NotAfter': 'string',
'NotBefore': 'string',
'Options': {
'CertificateTransparencyLoggingPreference': 'string'
},
'RenewalEligibility': 'string',
'RenewalSummary': {
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'RenewalStatus': 'string',
'RenewalStatusReason': 'string',
'UpdatedAt': 'string'
},
'Serial': 'string',
'SignatureAlgorithm': 'string',
'Status': 'string',
'Subject': 'string',
'SubjectAlternativeNames': [
'string',
],
'Type': 'string'
},
'AwsRedshiftCluster': {
'AllowVersionUpgrade': True|False,
'AutomatedSnapshotRetentionPeriod': 123,
'AvailabilityZone': 'string',
'ClusterAvailabilityStatus': 'string',
'ClusterCreateTime': 'string',
'ClusterIdentifier': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIpAddress': 'string',
'PublicIpAddress': 'string'
},
],
'ClusterParameterGroups': [
{
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
],
'ParameterApplyStatus': 'string',
'ParameterGroupName': 'string'
},
],
'ClusterPublicKey': 'string',
'ClusterRevisionNumber': 'string',
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'ManualSnapshotRetentionPeriod': 123,
'RetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterStatus': 'string',
'ClusterSubnetGroupName': 'string',
'ClusterVersion': 'string',
'DBName': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceEndTime': 'string',
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ElasticResizeNumberOfNodeOptions': 'string',
'Encrypted': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123
},
'EnhancedVpcRouting': True|False,
'ExpectedNextSnapshotScheduleTime': 'string',
'ExpectedNextSnapshotScheduleTimeStatus': 'string',
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'IamRoles': [
{
'ApplyStatus': 'string',
'IamRoleArn': 'string'
},
],
'KmsKeyId': 'string',
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'MasterUsername': 'string',
'NextMaintenanceWindowStartTime': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PendingActions': [
'string',
],
'PendingModifiedValues': {
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'ClusterType': 'string',
'ClusterVersion': 'string',
'EncryptionType': 'string',
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PubliclyAccessible': True|False
},
'PreferredMaintenanceWindow': 'string',
'PubliclyAccessible': True|False,
'ResizeInfo': {
'AllowCancelResize': True|False,
'ResizeType': 'string'
},
'RestoreStatus': {
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ProgressInMegaBytes': 123,
'SnapshotSizeInMegaBytes': 123,
'Status': 'string'
},
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'string',
'VpcId': 'string',
'VpcSecurityGroups': [
{
'Status': 'string',
'VpcSecurityGroupId': 'string'
},
],
'LoggingStatus': {
'BucketName': 'string',
'LastFailureMessage': 'string',
'LastFailureTime': 'string',
'LastSuccessfulDeliveryTime': 'string',
'LoggingEnabled': True|False,
'S3KeyPrefix': 'string'
}
},
'AwsElbLoadBalancer': {
'AvailabilityZones': [
'string',
],
'BackendServerDescriptions': [
{
'InstancePort': 123,
'PolicyNames': [
'string',
]
},
],
'CanonicalHostedZoneName': 'string',
'CanonicalHostedZoneNameID': 'string',
'CreatedTime': 'string',
'DnsName': 'string',
'HealthCheck': {
'HealthyThreshold': 123,
'Interval': 123,
'Target': 'string',
'Timeout': 123,
'UnhealthyThreshold': 123
},
'Instances': [
{
'InstanceId': 'string'
},
],
'ListenerDescriptions': [
{
'Listener': {
'InstancePort': 123,
'InstanceProtocol': 'string',
'LoadBalancerPort': 123,
'Protocol': 'string',
'SslCertificateId': 'string'
},
'PolicyNames': [
'string',
]
},
],
'LoadBalancerAttributes': {
'AccessLog': {
'EmitInterval': 123,
'Enabled': True|False,
'S3BucketName': 'string',
'S3BucketPrefix': 'string'
},
'ConnectionDraining': {
'Enabled': True|False,
'Timeout': 123
},
'ConnectionSettings': {
'IdleTimeout': 123
},
'CrossZoneLoadBalancing': {
'Enabled': True|False
},
'AdditionalAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'LoadBalancerName': 'string',
'Policies': {
'AppCookieStickinessPolicies': [
{
'CookieName': 'string',
'PolicyName': 'string'
},
],
'LbCookieStickinessPolicies': [
{
'CookieExpirationPeriod': 123,
'PolicyName': 'string'
},
],
'OtherPolicies': [
'string',
]
},
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'SourceSecurityGroup': {
'GroupName': 'string',
'OwnerAlias': 'string'
},
'Subnets': [
'string',
],
'VpcId': 'string'
},
'AwsIamGroup': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupId': 'string',
'GroupName': 'string',
'GroupPolicyList': [
{
'PolicyName': 'string'
},
],
'Path': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'InstanceProfileList': [
{
'Arn': 'string',
'CreateDate': 'string',
'InstanceProfileId': 'string',
'InstanceProfileName': 'string',
'Path': 'string',
'Roles': [
{
'Arn': 'string',
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'Path': 'string',
'RoleId': 'string',
'RoleName': 'string'
},
]
},
],
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'RoleId': 'string',
'RoleName': 'string',
'RolePolicyList': [
{
'PolicyName': 'string'
},
],
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string',
'Description': 'string',
'KeyRotationStatus': True|False
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'MultiAz': True|False,
'EnhancedMonitoringResourceArn': 'string',
'DbInstanceStatus': 'string',
'MasterUsername': 'string',
'AllocatedStorage': 123,
'PreferredBackupWindow': 'string',
'BackupRetentionPeriod': 123,
'DbSecurityGroups': [
'string',
],
'DbParameterGroups': [
{
'DbParameterGroupName': 'string',
'ParameterApplyStatus': 'string'
},
],
'AvailabilityZone': 'string',
'DbSubnetGroup': {
'DbSubnetGroupName': 'string',
'DbSubnetGroupDescription': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string'
},
'SubnetStatus': 'string'
},
],
'DbSubnetGroupArn': 'string'
},
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'DbInstanceClass': 'string',
'AllocatedStorage': 123,
'MasterUserPassword': 'string',
'Port': 123,
'BackupRetentionPeriod': 123,
'MultiAZ': True|False,
'EngineVersion': 'string',
'LicenseModel': 'string',
'Iops': 123,
'DbInstanceIdentifier': 'string',
'StorageType': 'string',
'CaCertificateIdentifier': 'string',
'DbSubnetGroupName': 'string',
'PendingCloudWatchLogsExports': {
'LogTypesToEnable': [
'string',
],
'LogTypesToDisable': [
'string',
]
},
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
]
},
'LatestRestorableTime': 'string',
'AutoMinorVersionUpgrade': True|False,
'ReadReplicaSourceDBInstanceIdentifier': 'string',
'ReadReplicaDBInstanceIdentifiers': [
'string',
],
'ReadReplicaDBClusterIdentifiers': [
'string',
],
'LicenseModel': 'string',
'Iops': 123,
'OptionGroupMemberships': [
{
'OptionGroupName': 'string',
'Status': 'string'
},
],
'CharacterSetName': 'string',
'SecondaryAvailabilityZone': 'string',
'StatusInfos': [
{
'StatusType': 'string',
'Normal': True|False,
'Status': 'string',
'Message': 'string'
},
],
'StorageType': 'string',
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'CopyTagsToSnapshot': True|False,
'MonitoringInterval': 123,
'MonitoringRoleArn': 'string',
'PromotionTier': 123,
'Timezone': 'string',
'PerformanceInsightsEnabled': True|False,
'PerformanceInsightsKmsKeyId': 'string',
'PerformanceInsightsRetentionPeriod': 123,
'EnabledCloudWatchLogsExports': [
'string',
],
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'ListenerEndpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'MaxAllocatedStorage': 123
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string',
'SqsSuccessFeedbackRoleArn': 'string',
'SqsFailureFeedbackRoleArn': 'string',
'ApplicationSuccessFeedbackRoleArn': 'string',
'FirehoseSuccessFeedbackRoleArn': 'string',
'FirehoseFailureFeedbackRoleArn': 'string',
'HttpSuccessFeedbackRoleArn': 'string',
'HttpFailureFeedbackRoleArn': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsRdsDbSnapshot': {
'DbSnapshotIdentifier': 'string',
'DbInstanceIdentifier': 'string',
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'VpcId': 'string',
'InstanceCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'Iops': 123,
'OptionGroupName': 'string',
'PercentProgress': 123,
'SourceRegion': 'string',
'SourceDbSnapshotIdentifier': 'string',
'StorageType': 'string',
'TdeCredentialArn': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'Timezone': 'string',
'IamDatabaseAuthenticationEnabled': True|False,
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'DbiResourceId': 'string'
},
'AwsRdsDbClusterSnapshot': {
'AvailabilityZones': [
'string',
],
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'VpcId': 'string',
'ClusterCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'PercentProgress': 123,
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterIdentifier': 'string',
'DbClusterSnapshotIdentifier': 'string',
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsRdsDbCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'DatabaseName': 'string',
'Status': 'string',
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'CustomEndpoints': [
'string',
],
'MultiAz': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'Port': 123,
'MasterUsername': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'ClusterCreateTime': 'string',
'EnabledCloudWatchLogsExports': [
'string',
],
'EngineMode': 'string',
'DeletionProtection': True|False,
'HttpEndpointEnabled': True|False,
'ActivityStreamStatus': 'string',
'CopyTagsToSnapshot': True|False,
'CrossAccountClone': True|False,
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'DbClusterParameterGroup': 'string',
'DbSubnetGroup': 'string',
'DbClusterOptionGroupMemberships': [
{
'DbClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'DbClusterIdentifier': 'string',
'DbClusterMembers': [
{
'IsClusterWriter': True|False,
'PromotionTier': 123,
'DbInstanceIdentifier': 'string',
'DbClusterParameterGroupStatus': 'string'
},
],
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsEcsCluster': {
'ClusterArn': 'string',
'ActiveServicesCount': 123,
'CapacityProviders': [
'string',
],
'ClusterSettings': [
{
'Name': 'string',
'Value': 'string'
},
],
'Configuration': {
'ExecuteCommandConfiguration': {
'KmsKeyId': 'string',
'LogConfiguration': {
'CloudWatchEncryptionEnabled': True|False,
'CloudWatchLogGroupName': 'string',
'S3BucketName': 'string',
'S3EncryptionEnabled': True|False,
'S3KeyPrefix': 'string'
},
'Logging': 'string'
}
},
'DefaultCapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'ClusterName': 'string',
'RegisteredContainerInstancesCount': 123,
'RunningTasksCount': 123,
'Status': 'string'
},
'AwsEcsContainer': {
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
'AwsEcsTaskDefinition': {
'ContainerDefinitions': [
{
'Command': [
'string',
],
'Cpu': 123,
'DependsOn': [
{
'Condition': 'string',
'ContainerName': 'string'
},
],
'DisableNetworking': True|False,
'DnsSearchDomains': [
'string',
],
'DnsServers': [
'string',
],
'DockerLabels': {
'string': 'string'
},
'DockerSecurityOptions': [
'string',
],
'EntryPoint': [
'string',
],
'Environment': [
{
'Name': 'string',
'Value': 'string'
},
],
'EnvironmentFiles': [
{
'Type': 'string',
'Value': 'string'
},
],
'Essential': True|False,
'ExtraHosts': [
{
'Hostname': 'string',
'IpAddress': 'string'
},
],
'FirelensConfiguration': {
'Options': {
'string': 'string'
},
'Type': 'string'
},
'HealthCheck': {
'Command': [
'string',
],
'Interval': 123,
'Retries': 123,
'StartPeriod': 123,
'Timeout': 123
},
'Hostname': 'string',
'Image': 'string',
'Interactive': True|False,
'Links': [
'string',
],
'LinuxParameters': {
'Capabilities': {
'Add': [
'string',
],
'Drop': [
'string',
]
},
'Devices': [
{
'ContainerPath': 'string',
'HostPath': 'string',
'Permissions': [
'string',
]
},
],
'InitProcessEnabled': True|False,
'MaxSwap': 123,
'SharedMemorySize': 123,
'Swappiness': 123,
'Tmpfs': [
{
'ContainerPath': 'string',
'MountOptions': [
'string',
],
'Size': 123
},
]
},
'LogConfiguration': {
'LogDriver': 'string',
'Options': {
'string': 'string'
},
'SecretOptions': [
{
'Name': 'string',
'ValueFrom': 'string'
},
]
},
'Memory': 123,
'MemoryReservation': 123,
'MountPoints': [
{
'ContainerPath': 'string',
'ReadOnly': True|False,
'SourceVolume': 'string'
},
],
'Name': 'string',
'PortMappings': [
{
'ContainerPort': 123,
'HostPort': 123,
'Protocol': 'string'
},
],
'Privileged': True|False,
'PseudoTerminal': True|False,
'ReadonlyRootFilesystem': True|False,
'RepositoryCredentials': {
'CredentialsParameter': 'string'
},
'ResourceRequirements': [
{
'Type': 'string',
'Value': 'string'
},
],
'Secrets': [
{
'Name': 'string',
'ValueFrom': 'string'
},
],
'StartTimeout': 123,
'StopTimeout': 123,
'SystemControls': [
{
'Namespace': 'string',
'Value': 'string'
},
],
'Ulimits': [
{
'HardLimit': 123,
'Name': 'string',
'SoftLimit': 123
},
],
'User': 'string',
'VolumesFrom': [
{
'ReadOnly': True|False,
'SourceContainer': 'string'
},
],
'WorkingDirectory': 'string'
},
],
'Cpu': 'string',
'ExecutionRoleArn': 'string',
'Family': 'string',
'InferenceAccelerators': [
{
'DeviceName': 'string',
'DeviceType': 'string'
},
],
'IpcMode': 'string',
'Memory': 'string',
'NetworkMode': 'string',
'PidMode': 'string',
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'ProxyConfiguration': {
'ContainerName': 'string',
'ProxyConfigurationProperties': [
{
'Name': 'string',
'Value': 'string'
},
],
'Type': 'string'
},
'RequiresCompatibilities': [
'string',
],
'TaskRoleArn': 'string',
'Volumes': [
{
'DockerVolumeConfiguration': {
'Autoprovision': True|False,
'Driver': 'string',
'DriverOpts': {
'string': 'string'
},
'Labels': {
'string': 'string'
},
'Scope': 'string'
},
'EfsVolumeConfiguration': {
'AuthorizationConfig': {
'AccessPointId': 'string',
'Iam': 'string'
},
'FilesystemId': 'string',
'RootDirectory': 'string',
'TransitEncryption': 'string',
'TransitEncryptionPort': 123
},
'Host': {
'SourcePath': 'string'
},
'Name': 'string'
},
]
},
'Container': {
'ContainerRuntime': 'string',
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string',
'VolumeMounts': [
{
'Name': 'string',
'MountPath': 'string'
},
],
'Privileged': True|False
},
'Other': {
'string': 'string'
},
'AwsRdsEventSubscription': {
'CustSubscriptionId': 'string',
'CustomerAwsId': 'string',
'Enabled': True|False,
'EventCategoriesList': [
'string',
],
'EventSubscriptionArn': 'string',
'SnsTopicArn': 'string',
'SourceIdsList': [
'string',
],
'SourceType': 'string',
'Status': 'string',
'SubscriptionCreationTime': 'string'
},
'AwsEcsService': {
'CapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'Cluster': 'string',
'DeploymentConfiguration': {
'DeploymentCircuitBreaker': {
'Enable': True|False,
'Rollback': True|False
},
'MaximumPercent': 123,
'MinimumHealthyPercent': 123
},
'DeploymentController': {
'Type': 'string'
},
'DesiredCount': 123,
'EnableEcsManagedTags': True|False,
'EnableExecuteCommand': True|False,
'HealthCheckGracePeriodSeconds': 123,
'LaunchType': 'string',
'LoadBalancers': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'LoadBalancerName': 'string',
'TargetGroupArn': 'string'
},
],
'Name': 'string',
'NetworkConfiguration': {
'AwsVpcConfiguration': {
'AssignPublicIp': 'string',
'SecurityGroups': [
'string',
],
'Subnets': [
'string',
]
}
},
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'PlacementStrategies': [
{
'Field': 'string',
'Type': 'string'
},
],
'PlatformVersion': 'string',
'PropagateTags': 'string',
'Role': 'string',
'SchedulingStrategy': 'string',
'ServiceArn': 'string',
'ServiceName': 'string',
'ServiceRegistries': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'Port': 123,
'RegistryArn': 'string'
},
],
'TaskDefinition': 'string'
},
'AwsAutoScalingLaunchConfiguration': {
'AssociatePublicIpAddress': True|False,
'BlockDeviceMappings': [
{
'DeviceName': 'string',
'Ebs': {
'DeleteOnTermination': True|False,
'Encrypted': True|False,
'Iops': 123,
'SnapshotId': 'string',
'VolumeSize': 123,
'VolumeType': 'string'
},
'NoDevice': True|False,
'VirtualName': 'string'
},
],
'ClassicLinkVpcId': 'string',
'ClassicLinkVpcSecurityGroups': [
'string',
],
'CreatedTime': 'string',
'EbsOptimized': True|False,
'IamInstanceProfile': 'string',
'ImageId': 'string',
'InstanceMonitoring': {
'Enabled': True|False
},
'InstanceType': 'string',
'KernelId': 'string',
'KeyName': 'string',
'LaunchConfigurationName': 'string',
'PlacementTenancy': 'string',
'RamdiskId': 'string',
'SecurityGroups': [
'string',
],
'SpotPrice': 'string',
'UserData': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string'
}
},
'AwsEc2VpnConnection': {
'VpnConnectionId': 'string',
'State': 'string',
'CustomerGatewayId': 'string',
'CustomerGatewayConfiguration': 'string',
'Type': 'string',
'VpnGatewayId': 'string',
'Category': 'string',
'VgwTelemetry': [
{
'AcceptedRouteCount': 123,
'CertificateArn': 'string',
'LastStatusChange': 'string',
'OutsideIpAddress': 'string',
'Status': 'string',
'StatusMessage': 'string'
},
],
'Options': {
'StaticRoutesOnly': True|False,
'TunnelOptions': [
{
'DpdTimeoutSeconds': 123,
'IkeVersions': [
'string',
],
'OutsideIpAddress': 'string',
'Phase1DhGroupNumbers': [
123,
],
'Phase1EncryptionAlgorithms': [
'string',
],
'Phase1IntegrityAlgorithms': [
'string',
],
'Phase1LifetimeSeconds': 123,
'Phase2DhGroupNumbers': [
123,
],
'Phase2EncryptionAlgorithms': [
'string',
],
'Phase2IntegrityAlgorithms': [
'string',
],
'Phase2LifetimeSeconds': 123,
'PreSharedKey': 'string',
'RekeyFuzzPercentage': 123,
'RekeyMarginTimeSeconds': 123,
'ReplayWindowSize': 123,
'TunnelInsideCidr': 'string'
},
]
},
'Routes': [
{
'DestinationCidrBlock': 'string',
'State': 'string'
},
],
'TransitGatewayId': 'string'
},
'AwsEcrContainerImage': {
'RegistryId': 'string',
'RepositoryName': 'string',
'Architecture': 'string',
'ImageDigest': 'string',
'ImageTags': [
'string',
],
'ImagePublishedAt': 'string'
},
'AwsOpenSearchServiceDomain': {
'Arn': 'string',
'AccessPolicies': 'string',
'DomainName': 'string',
'Id': 'string',
'DomainEndpoint': 'string',
'EngineVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string',
'OptionalDeployment': True|False
},
'ClusterConfig': {
'InstanceCount': 123,
'WarmEnabled': True|False,
'WarmCount': 123,
'DedicatedMasterEnabled': True|False,
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'DedicatedMasterCount': 123,
'InstanceType': 'string',
'WarmType': 'string',
'ZoneAwarenessEnabled': True|False,
'DedicatedMasterType': 'string'
},
'DomainEndpointOptions': {
'CustomEndpointCertificateArn': 'string',
'CustomEndpointEnabled': True|False,
'EnforceHTTPS': True|False,
'CustomEndpoint': 'string',
'TLSSecurityPolicy': 'string'
},
'VpcOptions': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'DomainEndpoints': {
'string': 'string'
},
'AdvancedSecurityOptions': {
'Enabled': True|False,
'InternalUserDatabaseEnabled': True|False,
'MasterUserOptions': {
'MasterUserArn': 'string',
'MasterUserName': 'string',
'MasterUserPassword': 'string'
}
}
},
'AwsEc2VpcEndpointService': {
'AcceptanceRequired': True|False,
'AvailabilityZones': [
'string',
],
'BaseEndpointDnsNames': [
'string',
],
'ManagesVpcEndpoints': True|False,
'GatewayLoadBalancerArns': [
'string',
],
'NetworkLoadBalancerArns': [
'string',
],
'PrivateDnsName': 'string',
'ServiceId': 'string',
'ServiceName': 'string',
'ServiceState': 'string',
'ServiceType': [
{
'ServiceType': 'string'
},
]
},
'AwsXrayEncryptionConfig': {
'KeyId': 'string',
'Status': 'string',
'Type': 'string'
},
'AwsWafRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsWafRegionalRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsEcrRepository': {
'Arn': 'string',
'ImageScanningConfiguration': {
'ScanOnPush': True|False
},
'ImageTagMutability': 'string',
'LifecyclePolicy': {
'LifecyclePolicyText': 'string',
'RegistryId': 'string'
},
'RepositoryName': 'string',
'RepositoryPolicyText': 'string'
},
'AwsEksCluster': {
'Arn': 'string',
'CertificateAuthorityData': 'string',
'ClusterStatus': 'string',
'Endpoint': 'string',
'Name': 'string',
'ResourcesVpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'RoleArn': 'string',
'Version': 'string',
'Logging': {
'ClusterLogging': [
{
'Enabled': True|False,
'Types': [
'string',
]
},
]
}
},
'AwsNetworkFirewallFirewallPolicy': {
'FirewallPolicy': {
'StatefulRuleGroupReferences': [
{
'ResourceArn': 'string'
},
],
'StatelessCustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessDefaultActions': [
'string',
],
'StatelessFragmentDefaultActions': [
'string',
],
'StatelessRuleGroupReferences': [
{
'Priority': 123,
'ResourceArn': 'string'
},
]
},
'FirewallPolicyArn': 'string',
'FirewallPolicyId': 'string',
'FirewallPolicyName': 'string',
'Description': 'string'
},
'AwsNetworkFirewallFirewall': {
'DeleteProtection': True|False,
'Description': 'string',
'FirewallArn': 'string',
'FirewallId': 'string',
'FirewallName': 'string',
'FirewallPolicyArn': 'string',
'FirewallPolicyChangeProtection': True|False,
'SubnetChangeProtection': True|False,
'SubnetMappings': [
{
'SubnetId': 'string'
},
],
'VpcId': 'string'
},
'AwsNetworkFirewallRuleGroup': {
'Capacity': 123,
'Description': 'string',
'RuleGroup': {
'RuleVariables': {
'IpSets': {
'Definition': [
'string',
]
},
'PortSets': {
'Definition': [
'string',
]
}
},
'RulesSource': {
'RulesSourceList': {
'GeneratedRulesType': 'string',
'TargetTypes': [
'string',
],
'Targets': [
'string',
]
},
'RulesString': 'string',
'StatefulRules': [
{
'Action': 'string',
'Header': {
'Destination': 'string',
'DestinationPort': 'string',
'Direction': 'string',
'Protocol': 'string',
'Source': 'string',
'SourcePort': 'string'
},
'RuleOptions': [
{
'Keyword': 'string',
'Settings': [
'string',
]
},
]
},
],
'StatelessRulesAndCustomActions': {
'CustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessRules': [
{
'Priority': 123,
'RuleDefinition': {
'Actions': [
'string',
],
'MatchAttributes': {
'DestinationPorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Destinations': [
{
'AddressDefinition': 'string'
},
],
'Protocols': [
123,
],
'SourcePorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Sources': [
{
'AddressDefinition': 'string'
},
],
'TcpFlags': [
{
'Flags': [
'string',
],
'Masks': [
'string',
]
},
]
}
}
},
]
}
}
},
'RuleGroupArn': 'string',
'RuleGroupId': 'string',
'RuleGroupName': 'string',
'Type': 'string'
},
'AwsRdsDbSecurityGroup': {
'DbSecurityGroupArn': 'string',
'DbSecurityGroupDescription': 'string',
'DbSecurityGroupName': 'string',
'Ec2SecurityGroups': [
{
'Ec2SecurityGroupId': 'string',
'Ec2SecurityGroupName': 'string',
'Ec2SecurityGroupOwnerId': 'string',
'Status': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string',
'Status': 'string'
},
],
'OwnerId': 'string',
'VpcId': 'string'
},
'AwsKinesisStream': {
'Name': 'string',
'Arn': 'string',
'StreamEncryption': {
'EncryptionType': 'string',
'KeyId': 'string'
},
'ShardCount': 123,
'RetentionPeriodHours': 123
},
'AwsEc2TransitGateway': {
'Id': 'string',
'Description': 'string',
'DefaultRouteTablePropagation': 'string',
'AutoAcceptSharedAttachments': 'string',
'DefaultRouteTableAssociation': 'string',
'TransitGatewayCidrBlocks': [
'string',
],
'AssociationDefaultRouteTableId': 'string',
'PropagationDefaultRouteTableId': 'string',
'VpnEcmpSupport': 'string',
'DnsSupport': 'string',
'MulticastSupport': 'string',
'AmazonSideAsn': 123
},
'AwsEfsAccessPoint': {
'AccessPointId': 'string',
'Arn': 'string',
'ClientToken': 'string',
'FileSystemId': 'string',
'PosixUser': {
'Gid': 'string',
'SecondaryGids': [
'string',
],
'Uid': 'string'
},
'RootDirectory': {
'CreationInfo': {
'OwnerGid': 'string',
'OwnerUid': 'string',
'Permissions': 'string'
},
'Path': 'string'
}
},
'AwsCloudFormationStack': {
'Capabilities': [
'string',
],
'CreationTime': 'string',
'Description': 'string',
'DisableRollback': True|False,
'DriftInformation': {
'StackDriftStatus': 'string'
},
'EnableTerminationProtection': True|False,
'LastUpdatedTime': 'string',
'NotificationArns': [
'string',
],
'Outputs': [
{
'Description': 'string',
'OutputKey': 'string',
'OutputValue': 'string'
},
],
'RoleArn': 'string',
'StackId': 'string',
'StackName': 'string',
'StackStatus': 'string',
'StackStatusReason': 'string',
'TimeoutInMinutes': 123
},
'AwsCloudWatchAlarm': {
'ActionsEnabled': True|False,
'AlarmActions': [
'string',
],
'AlarmArn': 'string',
'AlarmConfigurationUpdatedTimestamp': 'string',
'AlarmDescription': 'string',
'AlarmName': 'string',
'ComparisonOperator': 'string',
'DatapointsToAlarm': 123,
'Dimensions': [
{
'Name': 'string',
'Value': 'string'
},
],
'EvaluateLowSampleCountPercentile': 'string',
'EvaluationPeriods': 123,
'ExtendedStatistic': 'string',
'InsufficientDataActions': [
'string',
],
'MetricName': 'string',
'Namespace': 'string',
'OkActions': [
'string',
],
'Period': 123,
'Statistic': 'string',
'Threshold': 123.0,
'ThresholdMetricId': 'string',
'TreatMissingData': 'string',
'Unit': 'string'
},
'AwsEc2VpcPeeringConnection': {
'AccepterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'ExpirationTime': 'string',
'RequesterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'Status': {
'Code': 'string',
'Message': 'string'
},
'VpcPeeringConnectionId': 'string'
},
'AwsWafRegionalRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsWafRegionalRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRegionalWebAcl': {
'DefaultAction': 'string',
'MetricName': 'string',
'Name': 'string',
'RulesList': [
{
'Action': {
'Type': 'string'
},
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsWafRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsEcsTask': {
'ClusterArn': 'string',
'TaskDefinitionArn': 'string',
'Version': 'string',
'CreatedAt': 'string',
'StartedAt': 'string',
'StartedBy': 'string',
'Group': 'string',
'Volumes': [
{
'Name': 'string',
'Host': {
'SourcePath': 'string'
}
},
],
'Containers': [
{
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
]
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string',
'PackageManager': 'string',
'FilePath': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string',
'Source': 'string',
'Adjustments': [
{
'Metric': 'string',
'Reason': 'string'
},
]
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
],
'PatchSummary': {
'Id': 'string',
'InstalledCount': 123,
'MissingCount': 123,
'FailedCount': 123,
'InstalledOtherCount': 123,
'InstalledRejectedCount': 123,
'InstalledPendingReboot': 123,
'OperationStartTime': 'string',
'OperationEndTime': 'string',
'RebootOption': 'string',
'Operation': 'string'
},
'Action': {
'ActionType': 'string',
'NetworkConnectionAction': {
'ConnectionDirection': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'RemotePortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'Protocol': 'string',
'Blocked': True|False
},
'AwsApiCallAction': {
'Api': 'string',
'ServiceName': 'string',
'CallerType': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'DomainDetails': {
'Domain': 'string'
},
'AffectedResources': {
'string': 'string'
},
'FirstSeen': 'string',
'LastSeen': 'string'
},
'DnsRequestAction': {
'Domain': 'string',
'Protocol': 'string',
'Blocked': True|False
},
'PortProbeAction': {
'PortProbeDetails': [
{
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalIpDetails': {
'IpAddressV4': 'string'
},
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
}
},
],
'Blocked': True|False
}
},
'FindingProviderFields': {
'Confidence': 123,
'Criticality': 123,
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Severity': {
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Original': 'string'
},
'Types': [
'string',
]
},
'Sample': True|False
},
]
)
[REQUIRED]
A list of findings to import. To successfully import a finding, it must follow the Amazon Web Services Security Finding Format . Maximum of 100 findings per request.
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between Amazon Web Services security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by Amazon Web Services services or by the integrated third-party solutions and standards checks.
The schema version that a finding is formatted for.
The security findings provider-specific identifier for a finding.
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
The name of the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by product name, you use this attribute.
The name of the company for the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by company name, you use this attribute.
The Region from which the finding was generated.
Security Hub populates this attribute automatically for each finding. You cannot update it using BatchImportFindings or BatchUpdateFindings .
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
The Amazon Web Services account ID that a finding is generated in.
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
Indicates when the security-findings provider first observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the security-findings provider created the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the security-findings provider last updated the finding record.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A finding's severity.
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the Amazon Web Services service or integrated partner product that generated the finding.
The severity value of the finding. The allowed values are the following.
INFORMATIONAL - No issue was found.LOW - The issue does not require action on its own.MEDIUM - The issue must be addressed but not urgently.HIGH - The issue must be addressed as a priority.CRITICAL - The issue must be remediated immediately to avoid it escalating.If you provide Normalized and do not provide Label , then Label is set automatically as follows.
INFORMATIONALLOWMEDIUMHIGHCRITICALDeprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
INFORMATIONAL - 0LOW - 1MEDIUM - 40HIGH - 70CRITICAL - 90The native severity from the finding product that generated the finding.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A finding's title.
Note
In this release, Title is a required property.
A finding's description.
Note
In this release, Description is a required property.
A data type that describes the remediation options for a finding.
A recommendation on the steps to take to remediate the issue identified by a finding.
Describes the recommended steps to take to remediate an issue identified in a finding.
A URL to a page or site that contains information about how to remediate a finding.
A URL that links to a page about the current finding in the security-findings provider's solution.
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
Can contain up to 50 key-value pairs. For each key-value pair, the key can contain up to 128 characters, and the value can contain up to 2048 characters.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A list of malware related to a finding.
A list of malware related to a finding.
The name of the malware that was observed.
The type of the malware that was observed.
The file system path of the malware that was observed.
The state of the malware that was observed.
The details of network-related information about a finding.
The direction of network traffic associated with a finding.
The protocol of network-related information about a finding.
The range of open ports that is present on the network.
The first port in the port range.
The last port in the port range.
The source IPv4 address of network-related information about a finding.
The source IPv6 address of network-related information about a finding.
The source port of network-related information about a finding.
The source domain of network-related information about a finding.
The source media access control (MAC) address of network-related information about a finding.
The destination IPv4 address of network-related information about a finding.
The destination IPv6 address of network-related information about a finding.
The destination port of network-related information about a finding.
The destination domain of network-related information about a finding.
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
Information about a network path component.
The identifier of a component in the network path.
The type of component.
Information about the component that comes after the current component in the network path.
The protocol used for the component.
Information about the destination of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the origin of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the component that comes before the current node in the network path.
The protocol used for the component.
Information about the destination of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
Information about the origin of the component.
The IP addresses of the destination.
A list of port ranges for the destination.
A range of ports.
The first port in the port range.
The last port in the port range.
The details of process-related information about a finding.
The name of the process.
The path to the process executable.
The process ID.
The parent process ID.
Indicates when the process was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the process was terminated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Details about the threat detected in a security finding and the file paths that were affected by the threat.
Provides information about the threat detected in a security finding and the file paths that were affected by the threat.
The name of the threat.
The severity of the threat.
This total number of items in which the threat has been detected.
Provides information about the file paths that were affected by the threat.
Provides information about the file paths that were affected by the threat.
Path to the infected or suspicious file on the resource it was detected on.
The name of the infected or suspicious file corresponding to the hash.
The Amazon Resource Name (ARN) of the resource on which the threat was detected.
The hash value for the infected or suspicious file.
Threat intelligence details related to a finding.
Details about the threat intelligence related to a finding.
The type of threat intelligence indicator.
The value of a threat intelligence indicator.
The category of a threat intelligence indicator.
Indicates when the most recent instance of a threat intelligence indicator was observed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The source of the threat intelligence indicator.
The URL to the page or site where you can get more information about the threat intelligence indicator.
A set of resource data types that describe the resources that the finding refers to.
A resource related to a finding.
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
The canonical identifier for the given resource type.
The canonical Amazon Web Services partition name that the Region is assigned to.
The canonical Amazon Web Services external Region name where this resource is located.
Identifies the role of the resource in the finding. A resource is either the actor or target of the finding activity,
A list of Amazon Web Services tags associated with a resource at the time the finding was processed.
Contains information about sensitive data that was detected on the resource.
The path to the folder or file that contains the sensitive data.
The details about the sensitive data that was detected on the resource.
The type of content that the finding applies to.
The total size in bytes of the affected data.
Indicates whether there are additional occurrences of sensitive data that are not included in the finding. This occurs when the number of occurrences exceeds the maximum that can be included.
The current status of the sensitive data detection.
The code that represents the status of the sensitive data detection.
A longer description of the current status of the sensitive data detection.
Provides details about sensitive data that was identified based on built-in configuration.
Contains a detected instance of sensitive data that are based on built-in identifiers.
The category of sensitive data that was detected. For example, the category can indicate that the sensitive data involved credentials, financial information, or personal information.
The list of detected instances of sensitive data.
The list of detected instances of sensitive data.
The total number of occurrences of sensitive data that were detected.
The type of sensitive data that was detected. For example, the type might indicate that the data is an email address.
Details about the sensitive data that was detected.
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Identifies where the sensitive data begins and ends.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data detected in a binary text file.
Identifies where the sensitive data begins and ends.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
The page number of the page that contains the sensitive data.
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
An occurrence of sensitive data detected in a binary text file.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
The record index, starting from 0, for the record that contains the data.
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
The row number of the row that contains the data.
The name of the column that contains the data.
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
The total number of occurrences of sensitive data.
Provides details about sensitive data that was identified based on customer-defined configuration.
The list of detected instances of sensitive data.
The list of detected instances of sensitive data.
The total number of occurrences of sensitive data that were detected.
The ARN of the custom identifier that was used to detect the sensitive data.
he name of the custom identifier that detected the sensitive data.
Details about the sensitive data that was detected.
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Identifies where the sensitive data begins and ends.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data detected in a binary text file.
Identifies where the sensitive data begins and ends.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
The page number of the page that contains the sensitive data.
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
An occurrence of sensitive data detected in a binary text file.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
The record index, starting from 0, for the record that contains the data.
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
The row number of the row that contains the data.
The name of the column that contains the data.
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
The total number of occurrences of sensitive data.
Additional details about the resource related to a finding.
Details for an autoscaling group.
The name of the launch configuration.
The list of load balancers associated with the group.
The service to use for the health checks.
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
Indicates when the auto scaling group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The mixed instances policy for the automatic scaling group.
The instances distribution. The instances distribution specifies the distribution of On-Demand Instances and Spot Instances, the maximum price to pay for Spot Instances, and how the Auto Scaling group allocates instance types to fulfill On-Demand and Spot capacity.
How to allocate instance types to fulfill On-Demand capacity.
The minimum amount of the Auto Scaling group's capacity that must be fulfilled by On-Demand Instances.
The percentage of On-Demand Instances and Spot Instances for additional capacity beyond OnDemandBaseCapacity .
How to allocate instances across Spot Instance pools.
The number of Spot Instance pools across which to allocate your Spot Instances.
The maximum price per unit hour that you are willing to pay for a Spot Instance.
The launch template to use and the instance types (overrides) to use to provision EC2 instances to fulfill On-Demand and Spot capacities.
The launch template to use for a mixed instances policy.
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
Property values to use to override the values in the launch template.
Property values to use to override the values in the launch template.
The instance type. For example, m3.xlarge .
The number of capacity units provided by the specified instance type in terms of virtual CPUs, memory, storage, throughput, or other relative performance characteristic.
The list of Availability Zones for the automatic scaling group.
An Availability Zone for the automatic scaling group.
The name of the Availability Zone.
The launch template to use.
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
Indicates whether capacity rebalancing is enabled.
Details for an CodeBuild project.
The KMS key used to encrypt the build output artifacts.
You can specify either the ARN of the KMS key or, if available, the KMS key alias (using the format alias/alias-name).
Information about the build artifacts for the CodeBuild project.
Information about the build artifacts for the CodeBuild project.
An identifier for the artifact definition.
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
Whether the name specified in the buildspec file overrides the artifact name.
Only used when Type is S3 . The type of output artifact to create.
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
The type of build artifact.
Information about the build environment for this build project.
The certificate to use with this build project.
A set of environment variables to make available to builds for the build project.
Information about an environment variable that is available to builds for the build project.
The name of the environment variable.
The type of environment variable.
The value of the environment variable.
Whether to allow the Docker daemon to run inside a Docker container. Set to true if the build project is used to build Docker images.
The type of credentials CodeBuild uses to pull images in your build.
Valid values:
CODEBUILD specifies that CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust the CodeBuild service principal.SERVICE_ROLE specifies that CodeBuild uses your build project's service role.When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an CodeBuild curated image, you must use CODEBUILD credentials.
The credentials for access to a private registry.
The ARN or name of credentials created using Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current Amazon Web Services Region.
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for Secrets Manager.
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
The name of the build project.
Information about the build input source code for this build project.
The type of repository that contains the source code to be built. Valid values are:
BITBUCKET - The source code is in a Bitbucket repository.CODECOMMIT - The source code is in an CodeCommit repository.CODEPIPELINE - The source code settings are specified in the source action of a pipeline in CodePipeline.GITHUB - The source code is in a GitHub repository.GITHUB_ENTERPRISE - The source code is in a GitHub Enterprise repository.NO_SOURCE - The project does not have input source code.S3 - The source code is in an S3 input bucket.Information about the location of the source code to be built.
Valid values include:
https://git-codecommit.region-ID.amazonaws.com/v1/repos/repo-name ).bucket-name/path/to/object-name.zip ).bucket-name/path/to/source-code/folder/ ).Information about the Git clone depth for the build project.
Whether to ignore SSL warnings while connecting to the project source code.
The ARN of the IAM role that enables CodeBuild to interact with dependent Amazon Web Services services on behalf of the Amazon Web Services account.
Information about logs for the build project.
Information about CloudWatch Logs for the build project.
The group name of the logs in CloudWatch Logs.
The current status of the logs in CloudWatch Logs for a build project.
The prefix of the stream name of the CloudWatch Logs.
Information about logs built to an S3 bucket for a build project.
Whether to disable encryption of the S3 build log output.
The ARN of the S3 bucket and the path prefix for S3 logs.
The current status of the S3 build logs.
Information about the VPC configuration that CodeBuild accesses.
The ID of the VPC.
A list of one or more subnet IDs in your VPC.
A list of one or more security group IDs in your VPC.
Information about the secondary artifacts for the CodeBuild project.
Information about the build artifacts for the CodeBuild project.
An identifier for the artifact definition.
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
Whether the name specified in the buildspec file overrides the artifact name.
Only used when Type is S3 . The type of output artifact to create.
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
The type of build artifact.
Details about a CloudFront distribution.
Provides information about the cache configuration for the distribution.
The cache behaviors for the distribution.
Information about a cache behavior for the distribution.
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).The default cache behavior for the configuration.
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).The object that CloudFront sends in response to requests from the origin (for example, index.html) when a viewer requests the root URL for the distribution (http://www.example.com) instead of an object in your distribution (http://www.example.com/product-description.html).
The domain name corresponding to the distribution.
The entity tag is a hash of the object.
Indicates when that the distribution was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A complex type that controls whether access logs are written for the distribution.
The S3 bucket to store the access logs in.
With this field, you can enable or disable the selected distribution.
Specifies whether you want CloudFront to include cookies in access logs.
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
A complex type that contains information about origins for this distribution.
A complex type that contains origins or origin groups for this distribution.
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), AWS Elemental MediaStore, or other server from which CloudFront gets your files.
Amazon S3 origins: The DNS name of the S3 bucket from which you want CloudFront to get objects for this origin.
A unique identifier for the origin or origin group.
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
An origin that is an S3 bucket that is not configured with static website hosting.
The CloudFront origin access identity to associate with the origin.
An origin that is not an Amazon S3 bucket, with one exception. If the Amazon S3 bucket is configured with static website hosting, use this attribute. If the Amazon S3 bucket is not configured with static website hosting, use the S3OriginConfig type instead.
The HTTP port that CloudFront uses to connect to the origin.
The HTTPS port that CloudFront uses to connect to the origin.
Specifies how long, in seconds, CloudFront persists its connection to the origin.
Specifies the protocol (HTTP or HTTPS) that CloudFront uses to connect to the origin.
Specifies how long, in seconds, CloudFront waits for a response from the origin.
Specifies the minimum SSL/TLS protocol that CloudFront uses when connecting to your origin over HTTPS.
A list that contains allowed SSL/TLS protocols for this distribution.
The number of SSL/TLS protocols that you want to allow CloudFront to use when establishing an HTTPS connection with this origin.
Provides information about the origin groups in the distribution.
The list of origin groups.
Information about an origin group for the CloudFront distribution.
Provides the criteria for an origin group to fail over.
Information about the status codes that cause an origin group to fail over.
The list of status code values that can cause a failover to the next origin.
The number of status codes that can cause a failover.
Provides information about the TLS/SSL configuration that the distribution uses to communicate with viewers.
The ARN of the ACM certificate. Used if the certificate is stored in ACM. If you provide an ACM certificate ARN, you must also provide MinimumCertificateVersion and SslSupportMethod .
The identifier of the certificate. Note that in CloudFront, this attribute is deprecated.
The source of the certificate identified by Certificate . Note that in CloudFront, this attribute is deprecated.
Whether the distribution uses the CloudFront domain name. If set to false , then you provide either AcmCertificateArn or IamCertificateId .
The identifier of the IAM certificate. Used if the certificate is stored in IAM. If you provide IamCertificateId , then you also must provide MinimumProtocolVersion and SslSupportMethod .
The security policy that CloudFront uses for HTTPS connections with viewers. If SslSupportMethod is sni-only , then MinimumProtocolVersion must be TLSv1 or higher.
The viewers that the distribution accepts HTTPS connections from.
Indicates the current status of the distribution.
A unique identifier that specifies the WAF web ACL, if any, to associate with this distribution.
Details about an EC2 instance related to a finding.
The instance type of the instance.
The Amazon Machine Image (AMI) ID of the instance.
The IPv4 addresses associated with the instance.
The IPv6 addresses associated with the instance.
The key name associated with the instance.
The IAM profile ARN of the instance.
The identifier of the VPC that the instance was launched in.
The identifier of the subnet that the instance was launched in.
Indicates when the instance was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifiers of the network interfaces for the EC2 instance. The details for each network interface are in a corresponding AwsEc2NetworkInterfacesDetails object.
Identifies a network interface for the Amazon EC2 instance.
The identifier of the network interface. The details are in a corresponding AwsEc2NetworkInterfacesDetails object.
The virtualization type of the Amazon Machine Image (AMI) required to launch the instance.
Details about the metadata options for the Amazon EC2 instance.
Enables or disables the HTTP metadata endpoint on the instance.
Enables or disables the IPv6 endpoint for the instance metadata service.
The desired HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
The state of token usage for your instance metadata requests.
Specifies whether to allow access to instance tags from the instance metadata.
Details for an EC2 network interface.
The network interface attachment.
Indicates when the attachment initiated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifier of the network interface attachment
Indicates whether the network interface is deleted when the instance is terminated.
The device index of the network interface attachment on the instance.
The ID of the instance.
The Amazon Web Services account ID of the owner of the instance.
The attachment state.
Valid values: attaching | attached | detaching | detached
The ID of the network interface.
Security groups for the network interface.
A security group associated with the network interface.
The name of the security group.
The ID of the security group.
Indicates whether traffic to or from the instance is validated.
The IPv6 addresses associated with the network interface.
Provides information about an IPV6 address that is associated with the network interface.
The IPV6 address.
The private IPv4 addresses associated with the network interface.
Provides information about a private IPv4 address that is with the network interface.
The IP address.
The private DNS name for the IP address.
The public DNS name of the network interface.
The address of the Elastic IP address bound to the network interface.
Details for an EC2 security group.
The name of the security group.
The ID of the security group.
The Amazon Web Services account ID of the owner of the security group.
[VPC only] The ID of the VPC for the security group.
The inbound rules associated with the security group.
An IP permission for an EC2 security group.
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The security group and Amazon Web Services account ID pairs.
A relationship between a security group and a user.
The ID of the security group.
The name of the security group.
The status of a VPC peering connection, if applicable.
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
The ID of the VPC for the referenced security group, if applicable.
The ID of the VPC peering connection, if applicable.
The IPv4 ranges.
A range of IPv4 addresses.
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
The IPv6 ranges.
A range of IPv6 addresses.
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
A prefix list ID.
The ID of the prefix.
[VPC only] The outbound rules associated with the security group.
An IP permission for an EC2 security group.
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
The security group and Amazon Web Services account ID pairs.
A relationship between a security group and a user.
The ID of the security group.
The name of the security group.
The status of a VPC peering connection, if applicable.
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
The ID of the VPC for the referenced security group, if applicable.
The ID of the VPC peering connection, if applicable.
The IPv4 ranges.
A range of IPv4 addresses.
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
The IPv6 ranges.
A range of IPv6 addresses.
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
A prefix list ID.
The ID of the prefix.
Details for an Amazon EC2 volume.
Indicates when the volume was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The device name for the volume that is attached to the instance.
Specifies whether the volume is encrypted.
The size of the volume, in GiBs.
The snapshot from which the volume was created.
The volume state.
The ARN of the KMS key that was used to protect the volume encryption key for the volume.
The volume attachments.
An attachment to an Amazon EC2 volume.
The datetime when the attachment initiated.
Whether the EBS volume is deleted when the EC2 instance is terminated.
The identifier of the EC2 instance.
The attachment state of the volume.
The ID of the volume.
The volume type.
Indicates whether the volume was scanned or skipped.
Details for an Amazon EC2 VPC.
Information about the IPv4 CIDR blocks associated with the VPC.
An IPv4 CIDR block association.
The association ID for the IPv4 CIDR block.
The IPv4 CIDR block.
Information about the state of the IPv4 CIDR block.
Information about the IPv6 CIDR blocks associated with the VPC.
An IPV6 CIDR block association.
The association ID for the IPv6 CIDR block.
The IPv6 CIDR block.
Information about the state of the CIDR block.
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
The current state of the VPC.
Details about an Elastic IP address.
The identifier of the EC2 instance.
A public IP address that is associated with the EC2 instance.
The identifier that Amazon Web Services assigns to represent the allocation of the Elastic IP address for use with Amazon VPC.
The identifier that represents the association of the Elastic IP address with an EC2 instance.
The domain in which to allocate the address.
If the address is for use with EC2 instances in a VPC, then Domain is vpc . Otherwise, Domain is standard .
The identifier of an IP address pool. This parameter allows Amazon EC2 to select an IP address from the address pool.
The name of the location from which the Elastic IP address is advertised.
The identifier of the network interface.
The Amazon Web Services account ID of the owner of the network interface.
The private IP address that is associated with the Elastic IP address.
Details about a subnet in Amazon EC2.
Whether to assign an IPV6 address to a network interface that is created in this subnet.
The Availability Zone for the subnet.
The identifier of the Availability Zone for the subnet.
The number of available IPV4 addresses in the subnet. Does not include addresses for stopped instances.
The IPV4 CIDR block that is assigned to the subnet.
Whether this subnet is the default subnet for the Availability Zone.
Whether instances in this subnet receive a public IP address.
The identifier of the Amazon Web Services account that owns the subnet.
The current state of the subnet.
The ARN of the subnet.
The identifier of the subnet.
The identifier of the VPC that contains the subnet.
The IPV6 CIDR blocks that are associated with the subnet.
An IPV6 CIDR block association.
The association ID for the IPv6 CIDR block.
The IPv6 CIDR block.
Information about the state of the CIDR block.
Details about an EC2 network access control list (ACL).
Whether this is the default network ACL for the VPC.
The identifier of the network ACL.
The identifier of the Amazon Web Services account that owns the network ACL.
The identifier of the VPC for the network ACL.
Associations between the network ACL and subnets.
An association between the network ACL and a subnet.
The identifier of the association between the network ACL and the subnet.
The identifier of the network ACL.
The identifier of the subnet that is associated with the network ACL.
The set of rules in the network ACL.
A rule for the network ACL. Each rule allows or denies access based on the IP address, traffic direction, port, and protocol.
The IPV4 network range for which to deny or allow access.
Whether the rule is an egress rule. An egress rule is a rule that applies to traffic that leaves the subnet.
The Internet Control Message Protocol (ICMP) type and code for which to deny or allow access.
The ICMP code for which to deny or allow access. To deny or allow all codes, use the value -1 .
The ICMP type for which to deny or allow access. To deny or allow all types, use the value -1 .
The IPV6 network range for which to deny or allow access.
For TCP or UDP protocols, the range of ports that the rule applies to.
The first port in the port range.
The last port in the port range.
The protocol that the rule applies to. To deny or allow access to all protocols, use the value -1 .
Whether the rule is used to allow access or deny access.
The rule number. The rules are processed in order by their number.
Details about a load balancer.
The Availability Zones for the load balancer.
Information about an Availability Zone.
The name of the Availability Zone.
The ID of the subnet. You can specify one subnet per Availability Zone.
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The public DNS name of the load balancer.
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
The nodes of an Internet-facing load balancer have public IP addresses.
The IDs of the security groups for the load balancer.
The state of the load balancer.
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
A description of the state.
The type of load balancer.
The ID of the VPC for the load balancer.
Attributes of the load balancer.
A load balancer attribute.
The name of the load balancer attribute.
The value of the load balancer attribute.
Details about an Elastic Beanstalk environment.
The name of the application that is associated with the environment.
The URL to the CNAME for this environment.
The creation date for this environment.
The date when this environment was last modified.
A description of the environment.
For load-balanced, autoscaling environments, the URL to the load balancer. For single-instance environments, the IP address of the instance.
The ARN of the environment.
The identifier of the environment.
Links to other environments in the same group.
Contains information about a link to another environment that is in the same group.
The name of the linked environment.
The name of the environment link.
The name of the environment.
The configuration setting for the environment.
A configuration option setting for the environment.
The type of resource that the configuration option is associated with.
The name of the option.
The name of the resource.
The value of the configuration setting.
The ARN of the platform version for the environment.
The name of the solution stack that is deployed with the environment.
The current operational status of the environment.
The tier of the environment.
The name of the environment tier.
The type of environment tier.
The version of the environment tier.
The application version of the environment.
Details for an Elasticsearch domain.
IAM policy document specifying the access policies for the new Elasticsearch domain.
Additional options for the domain endpoint.
Whether to require that all traffic to the domain arrive over HTTPS.
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
Valid values:
Policy-Min-TLS-1-0-2019-07 , which supports TLSv1.0 and higherPolicy-Min-TLS-1-2-2019-07 , which only supports TLSv1.2Unique identifier for an Elasticsearch domain.
Name of an Elasticsearch domain.
Domain names are unique across all domains owned by the same account within an Amazon Web Services Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Domain-specific endpoint used to submit index, search, and data upload requests to an Elasticsearch domain.
The endpoint is a service URL.
The key-value pair that exists if the Elasticsearch domain uses VPC endpoints.
OpenSearch version.
Information about an OpenSearch cluster configuration.
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
Whether to use a dedicated master node for the Elasticsearch domain. A dedicated master node performs cluster management tasks, but doesn't hold data or respond to data upload requests.
The hardware configuration of the computer that hosts the dedicated master node. For example, m3.medium.elasticsearch . If this attribute is specified, then DedicatedMasterEnabled must be true .
The number of data nodes to use in the Elasticsearch domain.
The instance type for your data nodes. For example, m3.medium.elasticsearch .
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
he number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
Whether to enable zone awareness for the Elasticsearch domain. When zone awareness is enabled, OpenSearch allocates the cluster's nodes and replica index shards across Availability Zones in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
Details about the configuration for encryption at rest.
Whether encryption at rest is enabled.
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a .
Configures the CloudWatch Logs to publish for the Elasticsearch domain.
Configures the OpenSearch index logs publishing.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
Configures the OpenSearch search slow log publishing.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
The log configuration.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
Details about the configuration for node-to-node encryption.
Whether node-to-node encryption is enabled.
Information about the status of a domain relative to the latest service software.
The epoch time when the deployment window closes for required updates. After this time, Amazon OpenSearch Service schedules the software upgrade automatically.
Whether a request to update the domain can be canceled.
The version of the service software that is currently installed on the domain.
A more detailed description of the service software status.
The most recent version of the service software.
Whether a service software update is available for the domain.
The status of the service software update.
Information that OpenSearch derives based on VPCOptions for the domain.
The list of Availability Zones associated with the VPC subnets.
The list of security group IDs associated with the VPC endpoints for the domain.
A list of subnet IDs associated with the VPC endpoints for the domain.
ID for the VPC.
Details about an S3 bucket related to a finding.
The canonical user ID of the owner of the S3 bucket.
The display name of the owner of the S3 bucket.
The Amazon Web Services account identifier of the account that owns the S3 bucket.
Indicates when the S3 bucket was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The encryption rules that are applied to the S3 bucket.
The encryption rules that are applied to the S3 bucket.
An encryption rule to apply to the S3 bucket.
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
Server-side encryption algorithm to use for the default encryption.
KMS key ID to use for the default encryption.
The lifecycle configuration for objects in the S3 bucket.
The lifecycle rules.
Configuration for a lifecycle rule.
How Amazon S3 responds when a multipart upload is incomplete. Specifically, provides a number of days before Amazon S3 cancels the entire upload.
The number of days after which Amazon S3 cancels an incomplete multipart upload.
The date when objects are moved or deleted.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The length in days of the lifetime for objects that are subject to the rule.
Whether Amazon S3 removes a delete marker that has no noncurrent versions. If set to true , the delete marker is expired. If set to false , the policy takes no action.
If you provide ExpiredObjectDeleteMarker , you cannot provide ExpirationInDays or ExpirationDate .
Identifies the objects that a rule applies to.
The configuration for the filter.
The values to use for the filter.
A value to use for the filter.
Prefix text for matching objects.
A tag that is assigned to matching objects.
The tag key.
The tag value.
The type of filter value.
A prefix filter.
A tag filter.
The tag key.
The tag value
Whether to use AND or OR to join the operands.
The unique identifier of the rule.
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
Transition rules that describe when noncurrent objects transition to a specified storage class.
A transition rule that describes when noncurrent objects transition to a specified storage class.
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
The class of storage to change the object to after the object is noncurrent for the specified number of days.
A prefix that identifies one or more objects that the rule applies to.
The current status of the rule. Indicates whether the rule is currently being applied.
Transition rules that indicate when objects transition to a specified storage class.
A rule for when objects transition to specific storage classes.
A date on which to transition objects to the specified storage class. If you provide Date , you cannot provide Days .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The number of days after which to transition the object to the specified storage class. If you provide Days , you cannot provide Date .
The storage class to transition the object to.
Provides information about the Amazon S3 Public Access Block configuration for the S3 bucket.
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
The access control list for the S3 bucket.
The logging configuration for the S3 bucket.
The name of the S3 bucket where log files for the S3 bucket are stored.
The prefix added to log files for the S3 bucket.
The website configuration parameters for the S3 bucket.
The name of the error document for the website.
The name of the index document for the website.
The redirect behavior for requests to the website.
The name of the host to redirect requests to.
The protocol to use when redirecting requests. By default, uses the same protocol as the original request.
The rules for applying redirects for requests to the website.
A rule for redirecting requests to the website.
Provides the condition that must be met in order to apply the routing rule.
Indicates to redirect the request if the HTTP error code matches this value.
Indicates to redirect the request if the key prefix matches this value.
Provides the rules to redirect the request if the condition in Condition is met.
The host name to use in the redirect request.
The HTTP redirect code to use in the response.
The protocol to use to redirect the request. By default, uses the protocol from the original request.
The object key prefix to use in the redirect request.
Cannot be provided if ReplaceKeyWith is present.
The specific object key to use in the redirect request.
Cannot be provided if ReplaceKeyPrefixWith is present.
The notification configuration for the S3 bucket.
Configurations for S3 bucket notifications.
Details for an S3 bucket notification configuration.
The list of events that trigger a notification.
The filters that determine which S3 buckets generate notifications.
Details for an Amazon S3 filter.
The filter rules for the filter.
Details for a filter rule.
Indicates whether the filter is based on the prefix or suffix of the Amazon S3 key.
The filter value.
The ARN of the Lambda function, Amazon SQS queue, or Amazon SNS topic that generates the notification.
Indicates the type of notification. Notifications can be generated using Lambda functions, Amazon SQS queues or Amazon SNS topics.
The versioning state of an S3 bucket.
Specifies whether MFA delete is currently enabled in the S3 bucket versioning configuration. If the S3 bucket was never configured with MFA delete, then this attribute is not included.
The versioning status of the S3 bucket.
Details about the Amazon S3 Public Access Block configuration for an account.
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
Details about an S3 object related to a finding.
Indicates when the object was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
The version of the object.
A standard MIME type describing the format of the object data.
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
The identifier of the KMS symmetric customer managed key that was used for the object.
Details about a Secrets Manager secret.
Defines the rotation schedule for the secret.
The number of days after the previous rotation to rotate the secret.
Whether the rotation occurred within the specified rotation frequency.
The ARN, Key ID, or alias of the KMS key used to encrypt the SecretString or SecretBinary values for versions of this secret.
Whether rotation is enabled.
The ARN of the Lambda function that rotates the secret.
Whether the secret is deleted.
The name of the secret.
The user-provided description of the secret.
Details about an IAM access key related to a finding.
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
The status of the IAM access key related to a finding.
Indicates when the IAM access key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The ID of the principal associated with an access key.
The type of principal associated with an access key.
The name of the principal.
The Amazon Web Services account ID of the account for the key.
The identifier of the access key.
Information about the session that the key was used for.
Attributes of the session that the key was used for.
Indicates whether the session used multi-factor authentication (MFA).
Indicates when the session was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Information about the entity that created the session.
The type of principal (user, role, or group) that created the session.
The principal ID of the principal (user, role, or group) that created the session.
The ARN of the session.
The identifier of the Amazon Web Services account that created the session.
The name of the principal that created the session.
Details about an IAM user.
A list of the managed policies that are attached to the user.
A managed policy that is attached to an IAM principal.
The name of the policy.
The ARN of the policy.
Indicates when the user was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A list of IAM groups that the user belongs to.
The path to the user.
The permissions boundary for the user.
The ARN of the policy used to set the permissions boundary.
The usage type for the permissions boundary.
The unique identifier for the user.
The name of the user.
The list of inline policies that are embedded in the user.
Information about an inline policy that is embedded in the user.
The name of the policy.
Details about an IAM permissions policy.
The number of users, groups, and roles that the policy is attached to.
When the policy was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifier of the default version of the policy.
A description of the policy.
Whether the policy can be attached to a user, group, or role.
The path to the policy.
The number of users and roles that use the policy to set the permissions boundary.
The unique identifier of the policy.
The name of the policy.
List of versions of the policy.
A version of an IAM policy.
The identifier of the policy version.
Whether the version is the default version.
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
When the policy was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Provides information about a version 2 stage for Amazon API Gateway.
The identifier of a client certificate for a stage. Supported only for WebSocket API calls.
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The description of the stage.
Default route settings for the stage.
Indicates whether detailed metrics are enabled.
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
The throttling burst limit.
The throttling rate limit.
The identifier of the deployment that the stage is associated with.
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The route settings for the stage.
Indicates whether detailed metrics are enabled.
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
The throttling burst limit.
The throttling rate limit.
The name of the stage.
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
Information about settings for logging access for the stage.
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
The ARN of the CloudWatch Logs log group that receives the access logs.
Indicates whether updates to an API automatically trigger a new deployment.
The status of the last deployment of a stage. Supported only if the stage has automatic deployment enabled.
Indicates whether the stage is managed by API Gateway.
Provides information about a version 2 API in Amazon API Gateway.
The URI of the API.
Uses the format `` <api-id> .execute-api.*<region>* .amazonaws.com``
The stage name is typically appended to the URI to form a complete path to a deployed API stage.
The identifier of the API.
An API key selection expression. Supported only for WebSocket APIs.
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A description of the API.
The version identifier for the API.
The name of the API.
The API protocol for the API.
Valid values: WEBSOCKET | HTTP
The route selection expression for the API.
For HTTP APIs, must be ${request.method} ${request.path} . This is the default value for HTTP APIs.
For WebSocket APIs, there is no default value.
A cross-origin resource sharing (CORS) configuration. Supported only for HTTP APIs.
The allowed origins for CORS requests.
Indicates whether the CORS request includes credentials.
The exposed headers for CORS requests.
The number of seconds for which the browser caches preflight request results.
The allowed methods for CORS requests.
The allowed headers for CORS requests.
Details about a DynamoDB table.
A list of attribute definitions for the table.
Contains a definition of an attribute for the table.
The name of the attribute.
The type of the attribute.
Information about the billing for read/write capacity on the table.
The method used to charge for read and write throughput and to manage capacity.
If the billing mode is PAY_PER_REQUEST , indicates when the billing mode was set to that value.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the table was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
List of global secondary indexes for the table.
Information abut a global secondary index for the table.
Whether the index is currently backfilling.
The ARN of the index.
The name of the index.
The total size in bytes of the index.
The current status of the index.
The number of items in the index.
The key schema for the index.
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
The name of the key schema attribute.
The type of key used for the key schema attribute.
Attributes that are copied from the table into an index.
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
The types of attributes that are projected into the index.
Information about the provisioned throughput settings for the indexes.
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
The version of global tables being used.
The number of items in the table.
The primary key structure for the table.
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
The name of the key schema attribute.
The type of key used for the key schema attribute.
The ARN of the latest stream for the table.
The label of the latest stream. The label is not a unique identifier.
The list of local secondary indexes for the table.
Information about a local secondary index for a DynamoDB table.
The ARN of the index.
The name of the index.
The complete key schema for the index.
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
The name of the key schema attribute.
The type of key used for the key schema attribute.
Attributes that are copied from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected.
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
The types of attributes that are projected into the index.
Information about the provisioned throughput for the table.
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
The list of replicas of this table.
Information about a replica of a DynamoDB table.
List of global secondary indexes for the replica.
Information about a global secondary index for a DynamoDB table replica.
The name of the index.
Replica-specific configuration for the provisioned throughput for the index.
The read capacity units for the replica.
The identifier of the KMS key that will be used for KMS encryption for the replica.
Replica-specific configuration for the provisioned throughput.
The read capacity units for the replica.
The name of the Region where the replica is located.
The current status of the replica.
Detailed information about the replica status.
Information about the restore for the table.
The ARN of the source backup from which the table was restored.
The ARN of the source table for the backup.
Indicates the point in time that the table was restored to.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Whether a restore is currently in progress.
Information about the server-side encryption for the table.
If the key is inaccessible, the date and time when DynamoDB detected that the key was inaccessible.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The status of the server-side encryption.
The type of server-side encryption.
The ARN of the KMS key that is used for the KMS encryption.
The current DynamoDB Streams configuration for the table.
Indicates whether DynamoDB Streams is enabled on the table.
Determines the information that is written to the table.
The identifier of the table.
The name of the table.
The total size of the table in bytes.
The current status of the table.
Provides information about a version 1 Amazon API Gateway stage.
The identifier of the deployment that the stage points to.
The identifier of the client certificate for the stage.
The name of the stage.
A description of the stage.
Indicates whether a cache cluster is enabled for the stage.
If a cache cluster is enabled, the size of the cache cluster.
If a cache cluster is enabled, the status of the cache cluster.
Defines the method settings for the stage.
Defines settings for a method for the stage.
Indicates whether CloudWatch metrics are enabled for the method.
The logging level for this method. The logging level affects the log entries that are pushed to CloudWatch Logs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
Indicates whether data trace logging is enabled for the method. Data trace logging affects the log entries that are pushed to CloudWatch Logs.
The throttling burst limit for the method.
The throttling rate limit for the method.
Indicates whether responses are cached and returned for requests. For responses to be cached, a cache cluster must be enabled on the stage.
Specifies the time to live (TTL), in seconds, for cached responses. The higher the TTL, the longer the response is cached.
Indicates whether the cached responses are encrypted.
Indicates whether authorization is required for a cache invalidation request.
Indicates how to handle unauthorized requests for cache invalidation.
Valid values: FAIL_WITH_403 | SUCCEED_WITH_RESPONSE_HEADER | SUCCEED_WITHOUT_RESPONSE_HEADER
The HTTP method. You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
The resource path for this method. Forward slashes (/) are encoded as ~1 . The initial slash must include a forward slash.
For example, the path value /resource/subresource must be encoded as /~1resource~1subresource .
To specify the root path, use only a slash (/). You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
The version of the API documentation that is associated with the stage.
Settings for logging access for the stage.
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
The ARN of the CloudWatch Logs log group that receives the access logs.
Information about settings for canary deployment in the stage.
The percentage of traffic that is diverted to a canary deployment.
The deployment identifier for the canary deployment.
Stage variables that are overridden in the canary release deployment. The variables include new stage variables that are introduced in the canary.
Each variable is represented as a string-to-string map between the stage variable name and the variable value.
Indicates whether the canary deployment uses the stage cache.
Indicates whether active tracing with X-Ray is enabled for the stage.
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The ARN of the web ACL associated with the stage.
Provides information about a REST API in version 1 of Amazon API Gateway.
The identifier of the REST API.
The name of the REST API.
A description of the REST API.
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The version identifier for the REST API.
The list of binary media types supported by the REST API.
The minimum size in bytes of a payload before compression is enabled.
If null , then compression is disabled.
If 0, then all payloads are compressed.
The source of the API key for metering requests according to a usage plan.
HEADERindicates whether to read the API key from the X-API-Key header of a request.
AUTHORIZERindicates whether to read the API key from theUsageIdentifierKeyfrom a custom authorizer.
The endpoint configuration of the REST API.
A list of endpoint types for the REST API.
For an edge-optimized API, the endpoint type is EDGE . For a Regional API, the endpoint type is REGIONAL . For a private API, the endpoint type is PRIVATE .
Provides details about a CloudTrail trail.
The ARN of the log group that CloudTrail logs are delivered to.
The ARN of the role that the CloudWatch Events endpoint assumes when it writes to the log group.
Indicates whether the trail has custom event selectors.
The Region where the trail was created.
Indicates whether the trail publishes events from global services such as IAM to the log files.
Indicates whether the trail applies only to the current Region or to all Regions.
Whether the trail is created for all accounts in an organization in Organizations, or only for the current Amazon Web Services account.
The KMS key ID to use to encrypt the logs.
Indicates whether CloudTrail log file validation is enabled.
The name of the trail.
The name of the S3 bucket where the log files are published.
The S3 key prefix. The key prefix is added after the name of the S3 bucket where the log files are published.
The ARN of the SNS topic that is used for notifications of log file delivery.
The name of the SNS topic that is used for notifications of log file delivery.
The ARN of the trail.
Provides information about the state of a patch on an instance based on the patch baseline that was used to patch the instance.
Information about the status of a patch.
The compliance status details for the patch.
The current patch compliance status.
The possible status values are:
COMPLIANTNON_COMPLIANTUNSPECIFIED_DATAFor the patches that are compliant, the number that have a severity of CRITICAL .
For the patches that are compliant, the number that have a severity of HIGH .
For the patches that are compliant, the number that have a severity of MEDIUM .
The type of execution that was used determine compliance.
For the patch items that are noncompliant, the number of items that have a severity of CRITICAL .
For the patches that are compliant, the number that have a severity of INFORMATIONAL .
For the patches that are noncompliant, the number that have a severity of INFORMATIONAL .
For the patches that are compliant, the number that have a severity of UNSPECIFIED .
For the patches that are noncompliant, the number that have a severity of LOW .
For the patches that are noncompliant, the number that have a severity of HIGH .
For the patches that are compliant, the number that have a severity of LOW .
The type of resource for which the compliance was determined. For AwsSsmPatchCompliance , ComplianceType is Patch .
The identifier of the patch baseline. The patch baseline lists the patches that are approved for installation.
The highest severity for the patches.
For the patches that are noncompliant, the number that have a severity of MEDIUM .
For the patches that are noncompliant, the number that have a severity of UNSPECIFIED .
The identifier of the patch group for which compliance was determined. A patch group uses tags to group EC2 instances that should have the same patch compliance.
Provides details about an Certificate Manager certificate.
The ARN of the private certificate authority (CA) that will be used to issue the certificate.
Indicates when the certificate was requested.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The fully qualified domain name (FQDN), such as www.example.com, that is secured by the certificate.
Contains information about the initial validation of each domain name that occurs as a result of the RequestCertificate request.
Only provided if the certificate type is AMAZON_ISSUED .
Contains information about one of the following:
RequestCertificate requestA fully qualified domain name (FQDN) in the certificate.
The CNAME record that is added to the DNS database for domain validation.
The name of the resource.
The type of resource.
The value of the resource.
The domain name that Certificate Manager uses to send domain validation emails.
A list of email addresses that Certificate Manager uses to send domain validation emails.
The method used to validate the domain name.
The validation status of the domain name.
Contains a list of Extended Key Usage X.509 v3 extension objects. Each object specifies a purpose for which the certificate public key can be used and consists of a name and an object identifier (OID).
Contains information about an extended key usage X.509 v3 extension object.
The name of an extension value. Indicates the purpose for which the certificate public key can be used.
An object identifier (OID) for the extension value.
The format is numbers separated by periods.
For a failed certificate request, the reason for the failure.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
Indicates when the certificate was imported. Provided if the certificate type is IMPORTED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The list of ARNs for the Amazon Web Services resources that use the certificate.
Indicates when the certificate was issued. Provided if the certificate type is AMAZON_ISSUED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The name of the certificate authority that issued and signed the certificate.
The algorithm that was used to generate the public-private key pair.
Valid values: RSA_2048 | RSA_1024 |RSA_4096 | EC_prime256v1 | EC_secp384r1 | EC_secp521r1
A list of key usage X.509 v3 extension objects.
Contains information about a key usage X.509 v3 extension object.
The key usage extension name.
The time after which the certificate becomes invalid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The time before which the certificate is not valid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Provides a value that specifies whether to add the certificate to a transparency log.
Whether to add the certificate to a transparency log.
Valid values: DISABLED | ENABLED
Whether the certificate is eligible for renewal.
Valid values: ELIGIBLE | INELIGIBLE
Information about the status of the Certificate Manager managed renewal for the certificate. Provided only when the certificate type is AMAZON_ISSUED .
Information about the validation of each domain name in the certificate, as it pertains to Certificate Manager managed renewal. Provided only when the certificate type is AMAZON_ISSUED .
Contains information about one of the following:
RequestCertificate requestA fully qualified domain name (FQDN) in the certificate.
The CNAME record that is added to the DNS database for domain validation.
The name of the resource.
The type of resource.
The value of the resource.
The domain name that Certificate Manager uses to send domain validation emails.
A list of email addresses that Certificate Manager uses to send domain validation emails.
The method used to validate the domain name.
The validation status of the domain name.
The status of the Certificate Manager managed renewal of the certificate.
Valid values: PENDING_AUTO_RENEWAL | PENDING_VALIDATION | SUCCESS | FAILED
The reason that a renewal request was unsuccessful.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
Indicates when the renewal summary was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The serial number of the certificate.
The algorithm that was used to sign the certificate.
The status of the certificate.
Valid values: PENDING_VALIDATION | ISSUED | INACTIVE | EXPIRED | VALIDATION_TIMED_OUT | REVOKED | FAILED
The name of the entity that is associated with the public key contained in the certificate.
One or more domain names (subject alternative names) included in the certificate. This list contains the domain names that are bound to the public key that is contained in the certificate.
The subject alternative names include the canonical domain name (CN) of the certificate and additional domain names that can be used to connect to the website.
The source of the certificate. For certificates that Certificate Manager provides, Type is AMAZON_ISSUED . For certificates that are imported with ImportCertificate , Type is IMPORTED .
Valid values: IMPORTED | AMAZON_ISSUED | PRIVATE
Contains details about an Amazon Redshift cluster.
Indicates whether major version upgrades are applied automatically to the cluster during the maintenance window.
The number of days that automatic cluster snapshots are retained.
The name of the Availability Zone in which the cluster is located.
The availability status of the cluster for queries. Possible values are the following:
Available - The cluster is available for queries.Unavailable - The cluster is not available for queries.Maintenance - The cluster is intermittently available for queries due to maintenance activities.Modifying -The cluster is intermittently available for queries due to changes that modify the cluster.Failed - The cluster failed and is not available for queries.Indicates when the cluster was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The unique identifier of the cluster.
The nodes in the cluster.
A node in an Amazon Redshift cluster.
The role of the node. A node might be a leader node or a compute node.
The private IP address of the node.
The public IP address of the node.
The list of cluster parameter groups that are associated with this cluster.
A cluster parameter group that is associated with an Amazon Redshift cluster.
The list of parameter statuses.
The status of a parameter in a cluster parameter group for an Amazon Redshift cluster.
The name of the parameter.
The status of the parameter. Indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when it was applied.
Valid values: in-sync | pending-reboot | applying | invalid-parameter | apply-deferred | apply-error | unknown-error
The error that prevented the parameter from being applied to the database.
The status of updates to the parameters.
The name of the parameter group.
The public key for the cluster.
The specific revision number of the database in the cluster.
A list of cluster security groups that are associated with the cluster.
A security group that is associated with the cluster.
The name of the cluster security group.
The status of the cluster security group.
Information about the destination Region and retention period for the cross-Region snapshot copy.
The destination Region that snapshots are automatically copied to when cross-Region snapshot copy is enabled.
The number of days that manual snapshots are retained in the destination region after they are copied from a source region.
If the value is -1 , then the manual snapshot is retained indefinitely.
Valid values: Either -1 or an integer between 1 and 3,653
The number of days to retain automated snapshots in the destination Region after they are copied from a source Region.
The name of the snapshot copy grant.
The current status of the cluster.
Valid values: available | available, prep-for-resize | available, resize-cleanup |cancelling-resize | creating | deleting | final-snapshot | hardware-failure | incompatible-hsm |incompatible-network | incompatible-parameters | incompatible-restore | modifying | paused | rebooting | renaming | resizing | rotating-keys | storage-full | updating-hsm
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
The version ID of the Amazon Redshift engine that runs on the cluster.
The name of the initial database that was created when the cluster was created.
The same name is returned for the life of the cluster.
If an initial database is not specified, a database named devdev is created by default.
List of time windows during which maintenance was deferred.
A time windows during which maintenance was deferred for an Amazon Redshift cluster.
The end of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifier of the maintenance window.
The start of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Information about the status of the Elastic IP (EIP) address.
The elastic IP address for the cluster.
The status of the elastic IP address.
The number of nodes that you can use the elastic resize method to resize the cluster to.
Indicates whether the data in the cluster is encrypted at rest.
The connection endpoint.
The DNS address of the cluster.
The port that the database engine listens on.
Indicates whether to create the cluster with enhanced VPC routing enabled.
Indicates when the next snapshot is expected to be taken. The cluster must have a valid snapshot schedule and have backups enabled.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The status of the next expected snapshot.
Valid values: OnTrack | Pending
Information about whether the Amazon Redshift cluster finished applying any changes to hardware security module (HSM) settings that were specified in a modify cluster command.
The name of the HSM client certificate that the Amazon Redshift cluster uses to retrieve the data encryption keys that are stored in an HSM.
The name of the HSM configuration that contains the information that the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Indicates whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Type: String
Valid values: active | applying
A list of IAM roles that the cluster can use to access other Amazon Web Services services.
An IAM role that the cluster can use to access other Amazon Web Services services.
The status of the IAM role's association with the cluster.
Valid values: in-sync | adding | removing
The ARN of the IAM role.
The identifier of the KMS encryption key that is used to encrypt data in the cluster.
The name of the maintenance track for the cluster.
The default number of days to retain a manual snapshot.
If the value is -1 , the snapshot is retained indefinitely.
This setting doesn't change the retention period of existing snapshots.
Valid values: Either -1 or an integer between 1 and 3,653
The master user name for the cluster. This name is used to connect to the database that is specified in as the value of DBName .
Indicates the start of the next maintenance window.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The node type for the nodes in the cluster.
The number of compute nodes in the cluster.
A list of cluster operations that are waiting to start.
A list of changes to the cluster that are currently pending.
The pending or in-progress change to the automated snapshot retention period.
The pending or in-progress change to the identifier for the cluster.
The pending or in-progress change to the cluster type.
The pending or in-progress change to the service version.
The encryption type for a cluster.
Indicates whether to create the cluster with enhanced VPC routing enabled.
The name of the maintenance track that the cluster changes to during the next maintenance window.
The pending or in-progress change to the master user password for the cluster.
The pending or in-progress change to the cluster's node type.
The pending or in-progress change to the number of nodes in the cluster.
The pending or in-progress change to whether the cluster can be connected to from the public network.
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
Format: `` <day> :HH:MM-<day> :HH:MM``
For the day values, use mon | tue | wed | thu | fri | sat | sun
For example, sun:09:32-sun:10:02
Whether the cluster can be accessed from a public network.
Information about the resize operation for the cluster.
Indicates whether the resize operation can be canceled.
The type of resize operation.
Valid values: ClassicResize
Information about the status of a cluster restore action. Only applies to a cluster that was created by restoring a snapshot.
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
This field is only updated when you restore to DC2 and DS2 node types.
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
This field is only updated when you restore to DC2 and DS2 node types.
The estimate of the time remaining before the restore is complete. Returns 0 for a completed restore.
This field is only updated when you restore to DC2 and DS2 node types.
The number of megabytes that were transferred from snapshot storage.
This field is only updated when you restore to DC2 and DS2 node types.
The size of the set of snapshot data that was used to restore the cluster.
This field is only updated when you restore to DC2 and DS2 node types.
The status of the restore action.
Valid values: starting | restoring | completed | failed
A unique identifier for the cluster snapshot schedule.
The current state of the cluster snapshot schedule.
Valid values: MODIFYING | ACTIVE | FAILED
The identifier of the VPC that the cluster is in, if the cluster is in a VPC.
The list of VPC security groups that the cluster belongs to, if the cluster is in a VPC.
A VPC security group that the cluster belongs to, if the cluster is in a VPC.
The status of the VPC security group.
The identifier of the VPC security group.
Information about the logging status of the cluster.
The name of the S3 bucket where the log files are stored.
The message indicating that the logs failed to be delivered.
The last time when logs failed to be delivered.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The last time that logs were delivered successfully.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates whether logging is enabled.
Provides the prefix applied to the log file names.
Contains details about a Classic Load Balancer.
The list of Availability Zones for the load balancer.
Information about the configuration of the EC2 instances.
Provides information about the configuration of an EC2 instance for the load balancer.
The port on which the EC2 instance is listening.
The names of the policies that are enabled for the EC2 instance.
The name of the Amazon Route 53 hosted zone for the load balancer.
The ID of the Amazon Route 53 hosted zone for the load balancer.
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The DNS name of the load balancer.
Information about the health checks that are conducted on the load balancer.
The number of consecutive health check successes required before the instance is moved to the Healthy state.
The approximate interval, in seconds, between health checks of an individual instance.
The instance that is being checked. The target specifies the protocol and port. The available protocols are TCP, SSL, HTTP, and HTTPS. The range of valid ports is 1 through 65535.
For the HTTP and HTTPS protocols, the target also specifies the ping path.
For the TCP protocol, the target is specified as ``TCP: <port> `` .
For the SSL protocol, the target is specified as ``SSL.*<port>* `` .
For the HTTP and HTTPS protocols, the target is specified as `` <protocol> :<port> /<path to ping> `` .
The amount of time, in seconds, during which no response means a failed health check.
The number of consecutive health check failures that must occur before the instance is moved to the Unhealthy state.
List of EC2 instances for the load balancer.
Provides information about an EC2 instance for a load balancer.
The instance identifier.
The policies that are enabled for the load balancer listeners.
Lists the policies that are enabled for a load balancer listener.
Information about the listener.
The port on which the instance is listening.
The protocol to use to route traffic to instances.
Valid values: HTTP | HTTPS | TCP | SSL
The port on which the load balancer is listening.
On EC2-VPC, you can specify any port from the range 1-65535.
On EC2-Classic, you can specify any port from the following list: 25, 80, 443, 465, 587, 1024-65535.
The load balancer transport protocol to use for routing.
Valid values: HTTP | HTTPS | TCP | SSL
The ARN of the server certificate.
The policies enabled for the listener.
The attributes for a load balancer.
Information about the access log configuration for the load balancer.
If the access log is enabled, the load balancer captures detailed information about all requests. It delivers the information to a specified S3 bucket.
The interval in minutes for publishing the access logs.
You can publish access logs either every 5 minutes or every 60 minutes.
Indicates whether access logs are enabled for the load balancer.
The name of the S3 bucket where the access logs are stored.
The logical hierarchy that was created for the S3 bucket.
If a prefix is not provided, the log is placed at the root level of the bucket.
Information about the connection draining configuration for the load balancer.
If connection draining is enabled, the load balancer allows existing requests to complete before it shifts traffic away from a deregistered or unhealthy instance.
Indicates whether connection draining is enabled for the load balancer.
The maximum time, in seconds, to keep the existing connections open before deregistering the instances.
Connection settings for the load balancer.
If an idle timeout is configured, the load balancer allows connections to remain idle for the specified duration. When a connection is idle, no data is sent over the connection.
The time, in seconds, that the connection can be idle (no data is sent over the connection) before it is closed by the load balancer.
Cross-zone load balancing settings for the load balancer.
If cross-zone load balancing is enabled, the load balancer routes the request traffic evenly across all instances regardless of the Availability Zones.
Indicates whether cross-zone load balancing is enabled for the load balancer.
Any additional attributes for a load balancer.
Provides information about additional attributes for the load balancer.
The name of the attribute.
The value of the attribute.
The name of the load balancer.
The policies for a load balancer.
The stickiness policies that are created using CreateAppCookieStickinessPolicy .
Contains information about a stickiness policy that was created using CreateAppCookieStickinessPolicy .
The name of the application cookie used for stickiness.
The mnemonic name for the policy being created. The name must be unique within the set of policies for the load balancer.
The stickiness policies that are created using CreateLBCookieStickinessPolicy .
Contains information about a stickiness policy that was created using CreateLBCookieStickinessPolicy .
The amount of time, in seconds, after which the cookie is considered stale. If an expiration period is not specified, the stickiness session lasts for the duration of the browser session.
The name of the policy. The name must be unique within the set of policies for the load balancer.
The policies other than the stickiness policies.
The type of load balancer. Only provided if the load balancer is in a VPC.
If Scheme is internet-facing , the load balancer has a public DNS name that resolves to a public IP address.
If Scheme is internal , the load balancer has a public DNS name that resolves to a private IP address.
The security groups for the load balancer. Only provided if the load balancer is in a VPC.
Information about the security group for the load balancer. This is the security group that is used for inbound rules.
The name of the security group.
The owner of the security group.
The list of subnet identifiers for the load balancer.
The identifier of the VPC for the load balancer.
Contains details about an IAM group.
A list of the managed policies that are attached to the IAM group.
A managed policy that is attached to an IAM principal.
The name of the policy.
The ARN of the policy.
Indicates when the IAM group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifier of the IAM group.
The name of the IAM group.
The list of inline policies that are embedded in the group.
A managed policy that is attached to the IAM group.
The name of the policy.
The path to the group.
Details about an IAM role.
The trust policy that grants permission to assume the role.
The list of the managed policies that are attached to the role.
A managed policy that is attached to an IAM principal.
The name of the policy.
The ARN of the policy.
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The list of instance profiles that contain this role.
Information about an instance profile.
The ARN of the instance profile.
Indicates when the instance profile was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The identifier of the instance profile.
The name of the instance profile.
The path to the instance profile.
The roles associated with the instance profile.
Information about a role associated with an instance profile.
The ARN of the role.
The policy that grants an entity permission to assume the role.
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The path to the role.
The identifier of the role.
The name of the role.
Information about the policy used to set the permissions boundary for an IAM principal.
The ARN of the policy used to set the permissions boundary.
The usage type for the permissions boundary.
The stable and unique string identifying the role.
The friendly name that identifies the role.
The list of inline policies that are embedded in the role.
An inline policy that is embedded in the role.
The name of the policy.
The maximum session duration (in seconds) that you want to set for the specified role.
The path to the role.
Details about an KMS key.
The twelve-digit account ID of the Amazon Web Services account that owns the KMS key.
Indicates when the KMS key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The globally unique identifier for the KMS key.
The manager of the KMS key. KMS keys in your Amazon Web Services account are either customer managed or Amazon Web Services managed.
The state of the KMS key.
The source of the KMS key material.
When this value is AWS_KMS , KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the KMS key lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the CloudHSM cluster associated with a custom key store.
A description of the KMS key.
Whether the key has key rotation enabled.
Details about a Lambda function.
An AwsLambdaFunctionCode object.
An Amazon S3 bucket in the same Amazon Web Services Region as your function. The bucket can be in a different Amazon Web Services account.
The Amazon S3 key of the deployment package.
For versioned objects, the version of the deployment package object to use.
The base64-encoded contents of the deployment package. Amazon Web Services SDK and Amazon Web Services CLI clients handle the encoding for you.
The SHA256 hash of the function's deployment package.
The function's dead letter queue.
The ARN of an SQS queue or SNS topic.
The function's environment variables.
Environment variable key-value pairs.
An AwsLambdaFunctionEnvironmentError object.
The error code.
The error message.
The name of the function.
The function that Lambda calls to begin executing your function.
The KMS key that is used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed customer managed key.
Indicates when the function was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The function's layers.
An Lambda layer.
The ARN of the function layer.
The size of the layer archive in bytes.
For Lambda@Edge functions, the ARN of the master function.
The memory that is allocated to the function.
The latest updated revision of the function or alias.
The function's execution role.
The runtime environment for the Lambda function.
The amount of time that Lambda allows a function to run before stopping it.
The function's X-Ray tracing configuration.
The tracing mode.
The function's networking configuration.
A list of VPC security groups IDs.
A list of VPC subnet IDs.
The ID of the VPC.
The version of the Lambda function.
Details for a Lambda layer version.
The version number.
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Details about an Amazon RDS database instance.
The IAM roles associated with the DB instance.
An IAM role associated with the DB instance.
The ARN of the IAM role that is associated with the DB instance.
The name of the feature associated with the IAM role.
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
ACTIVE - The IAM role ARN is associated with the DB instance and can be used to access other Amazon Web Services services on your behalf.PENDING - The IAM role ARN is being associated with the DB instance.INVALID - The IAM role ARN is associated with the DB instance. But the DB instance is unable to assume the IAM role in order to access other Amazon Web Services services on your behalf.The identifier of the CA certificate for this DB instance.
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
Contains the name of the compute and memory capacity class of the DB instance.
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
The Amazon Web Services Region-unique, immutable identifier for the DB instance. This identifier is found in CloudTrail log entries whenever the KMS key for the DB instance is accessed.
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Specifies the connection endpoint.
Specifies the DNS address of the DB instance.
Specifies the port that the database engine is listening on.
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Provides the name of the database engine to use for this DB instance.
Indicates the database engine version.
True if mapping of IAM accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
Indicates when the DB instance was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
If StorageEncrypted is true, the KMS key identifier for the encrypted DB instance.
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
Specifies whether the DB instance is encrypted.
The ARN from the key store with which the instance is associated for TDE encryption.
A list of VPC security groups that the DB instance belongs to.
A VPC security groups that the DB instance belongs to.
The name of the VPC security group.
The status of the VPC security group.
Whether the DB instance is a multiple Availability Zone deployment.
The ARN of the CloudWatch Logs log stream that receives the enhanced monitoring metrics data for the DB instance.
The current status of the DB instance.
The master user name of the DB instance.
The amount of storage (in gigabytes) to initially allocate for the DB instance.
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
The number of days for which to retain automated backups.
A list of the DB security groups to assign to the DB instance.
A list of the DB parameter groups to assign to the DB instance.
Provides information about a parameter group for a DB instance.
The name of the parameter group.
The status of parameter updates.
The Availability Zone where the DB instance will be created.
Information about the subnet group that is associated with the DB instance.
The name of the subnet group.
The description of the subnet group.
The VPC ID of the subnet group.
The status of the subnet group.
A list of subnets in the subnet group.
Information about a subnet in a subnet group.
The identifier of a subnet in the subnet group.
Information about the Availability Zone for a subnet in the subnet group.
The name of the Availability Zone for a subnet in the subnet group.
The status of a subnet in the subnet group.
The ARN of the subnet group.
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
Changes to the DB instance that are currently pending.
The new DB instance class for the DB instance.
The new value of the allocated storage for the DB instance.
The new master user password for the DB instance.
The new port for the DB instance.
The new backup retention period for the DB instance.
Indicates that a single Availability Zone DB instance is changing to a multiple Availability Zone deployment.
The new engine version for the DB instance.
The new license model value for the DB instance.
The new provisioned IOPS value for the DB instance.
The new DB instance identifier for the DB instance.
The new storage type for the DB instance.
The new CA certificate identifier for the DB instance.
The name of the new subnet group for the DB instance.
A list of log types that are being enabled or disabled.
A list of log types that are being enabled.
A list of log types that are being disabled.
Processor features that are being updated.
A processor feature.
The name of the processor feature.
The value of the processor feature.
Specifies the latest time to which a database can be restored with point-in-time restore.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates whether minor version patches are applied automatically.
If this DB instance is a read replica, contains the identifier of the source DB instance.
List of identifiers of the read replicas associated with this DB instance.
List of identifiers of Aurora DB clusters to which the RDS DB instance is replicated as a read replica.
License model information for this DB instance.
Specifies the provisioned IOPS (I/O operations per second) for this DB instance.
The list of option group memberships for this DB instance.
An option group membership.
The name of the option group.
The status of the option group membership.
The name of the character set that this DB instance is associated with.
For a DB instance with multi-Availability Zone support, the name of the secondary Availability Zone.
The status of a read replica. If the instance isn't a read replica, this is empty.
Information about the status of a read replica.
The type of status. For a read replica, the status type is read replication.
Whether the read replica instance is operating normally.
The status of the read replica instance.
If the read replica is currently in an error state, provides the error details.
The storage type for the DB instance.
The Active Directory domain membership records associated with the DB instance.
Information about an Active Directory domain membership record associated with the DB instance.
The identifier of the Active Directory domain.
The status of the Active Directory Domain membership for the DB instance.
The fully qualified domain name of the Active Directory domain.
The name of the IAM role to use when making API calls to the Directory Service.
Whether to copy resource tags to snapshots of the DB instance.
The interval, in seconds, between points when enhanced monitoring metrics are collected for the DB instance.
The ARN for the IAM role that permits Amazon RDS to send enhanced monitoring metrics to CloudWatch Logs.
The order in which to promote an Aurora replica to the primary instance after a failure of the existing primary instance.
The time zone of the DB instance.
Indicates whether Performance Insights is enabled for the DB instance.
The identifier of the KMS key used to encrypt the Performance Insights data.
The number of days to retain Performance Insights data.
A list of log types that this DB instance is configured to export to CloudWatch Logs.
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
A processor feature.
The name of the processor feature.
The value of the processor feature.
Specifies the connection endpoint.
Specifies the DNS address of the DB instance.
Specifies the port that the database engine is listening on.
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
The upper limit to which Amazon RDS can automatically scale the storage of the DB instance.
Details about an SNS topic.
The ID of an Amazon Web Services managed key for Amazon SNS or a customer managed key.
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
A wrapper type for the attributes of an Amazon SNS subscription.
The subscription's endpoint (format depends on the protocol).
The subscription's protocol.
The name of the Amazon SNS topic.
The subscription's owner.
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to a platform application endpoint.
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
Details about an SQS queue.
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again.
The ID of an Amazon Web Services managed key for Amazon SQS or a custom KMS key.
The name of the new queue.
The ARN of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
Details for an WAF web ACL.
A friendly name or description of the web ACL. You can't change the name of a web ACL after you create it.
The action to perform if none of the rules contained in the web ACL match.
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
Details for a rule in an WAF web ACL.
Specifies the action that CloudFront or WAF takes when a web request matches the conditions in the rule.
Specifies how you want WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
ALLOW - WAF allows requestsBLOCK - WAF blocks requestsCOUNT - WAF increments a counter of the requests that match all of the conditions in the rule. WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify COUNT for the default action for a web ACL.Rules to exclude from a rule group.
Details about a rule to exclude from a rule group.
The unique identifier for the rule to exclude from the rule group.
Use the OverrideAction to test your RuleGroup .
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup , set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
ActivatedRule|OverrideActionapplies only when updating or adding aRuleGroupto a web ACL. In this case you do not useActivatedRuleAction. For all other update requests,ActivatedRuleActionis used instead ofActivatedRuleOverrideAction.
COUNToverrides the action specified by the individual rule within aRuleGroup.
If set to NONE , the rule's action takes place.
Specifies the order in which the rules in a web ACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a web ACL, the values do not need to be consecutive.
The identifier for a rule.
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
A unique identifier for a web ACL.
Details about an Amazon RDS database snapshot.
The name or ARN of the DB snapshot that is used to restore the DB instance.
A name for the DB instance.
When the snapshot was taken in Coordinated Universal Time (UTC).
The name of the database engine to use for this DB instance.
The amount of storage (in gigabytes) to be initially allocated for the database instance.
The status of this DB snapshot.
The port that the database engine was listening on at the time of the snapshot.
Specifies the name of the Availability Zone in which the DB instance was located at the time of the DB snapshot.
The VPC ID associated with the DB snapshot.
Specifies the time in Coordinated Universal Time (UTC) when the DB instance, from which the snapshot was taken, was created.
The master user name for the DB snapshot.
The version of the database engine.
License model information for the restored DB instance.
The type of the DB snapshot.
The provisioned IOPS (I/O operations per second) value of the DB instance at the time of the snapshot.
The option group name for the DB snapshot.
The percentage of the estimated data that has been transferred.
The Amazon Web Services Region that the DB snapshot was created in or copied from.
The DB snapshot ARN that the DB snapshot was copied from.
The storage type associated with the DB snapshot.
The ARN from the key store with which to associate the instance for TDE encryption.
Whether the DB snapshot is encrypted.
If Encrypted is true , the KMS key identifier for the encrypted DB snapshot.
The time zone of the DB snapshot.
Whether mapping of IAM accounts to database accounts is enabled.
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
A processor feature.
The name of the processor feature.
The value of the processor feature.
The identifier for the source DB instance.
Details about an Amazon RDS database cluster snapshot.
A list of Availability Zones where instances in the DB cluster can be created.
Indicates when the snapshot was taken.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The name of the database engine that you want to use for this DB instance.
Specifies the allocated storage size in gibibytes (GiB).
The status of this DB cluster snapshot.
The port number on which the DB instances in the DB cluster accept connections.
The VPC ID that is associated with the DB cluster snapshot.
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The name of the master user for the DB cluster.
The version of the database engine to use.
The license model information for this DB cluster snapshot.
The type of DB cluster snapshot.
Specifies the percentage of the estimated data that has been transferred.
Whether the DB cluster is encrypted.
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
The DB cluster identifier.
The identifier of the DB cluster snapshot.
Whether mapping of IAM accounts to database accounts is enabled.
Details about an Amazon RDS database cluster.
For all database engines except Aurora, specifies the allocated storage size in gibibytes (GiB).
A list of Availability Zones (AZs) where instances in the DB cluster can be created.
The number of days for which automated backups are retained.
The name of the database.
The current status of this DB cluster.
The connection endpoint for the primary instance of the DB cluster.
The reader endpoint for the DB cluster.
A list of custom endpoints for the DB cluster.
Whether the DB cluster has instances in multiple Availability Zones.
The name of the database engine to use for this DB cluster.
The version number of the database engine to use.
The port number on which the DB instances in the DB cluster accept connections.
The name of the master user for the DB cluster.
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
The identifiers of the read replicas that are associated with this DB cluster.
A list of VPC security groups that the DB cluster belongs to.
A VPC security groups that the DB instance belongs to.
The name of the VPC security group.
The status of the VPC security group.
Specifies the identifier that Amazon Route 53 assigns when you create a hosted zone.
Whether the DB cluster is encrypted.
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
The identifier of the DB cluster. The identifier must be unique within each Amazon Web Services Region and is immutable.
A list of the IAM roles that are associated with the DB cluster.
An IAM role that is associated with the Amazon RDS DB cluster.
The ARN of the IAM role.
The status of the association between the IAM role and the DB cluster.
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A list of log types that this DB cluster is configured to export to CloudWatch Logs.
The database engine mode of the DB cluster.
Whether the DB cluster has deletion protection enabled.
Whether the HTTP endpoint for an Aurora Serverless DB cluster is enabled.
The status of the database activity stream.
Whether tags are copied from the DB cluster to snapshots of the DB cluster.
Whether the DB cluster is a clone of a DB cluster owned by a different Amazon Web Services account.
The Active Directory domain membership records that are associated with the DB cluster.
Information about an Active Directory domain membership record associated with the DB instance.
The identifier of the Active Directory domain.
The status of the Active Directory Domain membership for the DB instance.
The fully qualified domain name of the Active Directory domain.
The name of the IAM role to use when making API calls to the Directory Service.
The name of the DB cluster parameter group for the DB cluster.
The subnet group that is associated with the DB cluster, including the name, description, and subnets in the subnet group.
The list of option group memberships for this DB cluster.
Information about an option group membership for a DB cluster.
The name of the DB cluster option group.
The status of the DB cluster option group.
The DB cluster identifier that the user assigned to the cluster. This identifier is the unique key that identifies a DB cluster.
The list of instances that make up the DB cluster.
Information about an instance in the DB cluster.
Whether the cluster member is the primary instance for the DB cluster.
Specifies the order in which an Aurora replica is promoted to the primary instance when the existing primary instance fails.
The instance identifier for this member of the DB cluster.
The status of the DB cluster parameter group for this member of the DB cluster.
Whether the mapping of IAM accounts to database accounts is enabled.
Details about an Amazon ECS cluster.
The Amazon Resource Name (ARN) that identifies the cluster.
The number of services that are running on the cluster in an ACTIVE state. You can view these services with the Amazon ECS ` ListServices https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html`__ API operation.
The short name of one or more capacity providers to associate with the cluster.
The setting to use to create the cluster. Specifically used to configure whether to enable CloudWatch Container Insights for the cluster.
Indicates whether to enable CloudWatch Container Insights for the ECS cluster.
The name of the setting.
The value of the setting.
The run command configuration for the cluster.
Contains the run command configuration for the cluster.
The identifier of the KMS key that is used to encrypt the data between the local client and the container.
The log configuration for the results of the run command actions. Required if Logging is NONE .
Whether to enable encryption on the CloudWatch logs.
The name of the CloudWatch log group to send the logs to.
The name of the S3 bucket to send logs to.
Whether to encrypt the logs that are sent to the S3 bucket.
Identifies the folder in the S3 bucket to send the logs to.
The log setting to use for redirecting logs for run command results.
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
The minimum number of tasks to run on the specified capacity provider.
The name of the capacity provider.
The relative percentage of the total number of tasks launched that should use the capacity provider.
A name that you use to identify your cluster.
The number of container instances registered into the cluster. This includes container instances in both ACTIVE and DRAINING status.
The number of tasks in the cluster that are in the RUNNING state.
The status of the cluster.
Provides information about a Docker container that's part of a task.
The name of the container.
The image used for the container.
The mount points for data volumes in your container.
Details for a volume mount point that's used in a container definition.
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
The path on the container to mount the host volume at.
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
Details about a task definition. A task definition describes the container and volume definitions of an Amazon Elastic Container Service task.
The container definitions that describe the containers that make up the task.
A container definition that describes a container in the task.
The command that is passed to the container.
The number of CPU units reserved for the container.
The dependencies that are defined for container startup and shutdown.
A dependency that is defined for container startup and shutdown.
The dependency condition of the dependent container. Indicates the required status of the dependent container before the current container can start.
The name of the dependent container.
Whether to disable networking within the container.
A list of DNS search domains that are presented to the container.
A list of DNS servers that are presented to the container.
A key-value map of labels to add to the container.
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems.
The entry point that is passed to the container.
The environment variables to pass to a container.
An environment variable to pass to the container.
The name of the environment variable.
The value of the environment variable.
A list of files containing the environment variables to pass to a container.
A file that contain environment variables to pass to a container.
The type of environment file.
The ARN of the S3 object that contains the environment variable file.
Whether the container is essential. All tasks must have at least one essential container.
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container.
A hostname and IP address mapping to append to the /etc/hosts file on the container.
The hostname to use in the /etc/hosts entry.
The IP address to use in the /etc/hosts entry.
The FireLens configuration for the container. Specifies and configures a log router for container logs.
The options to use to configure the log router.
The valid option keys are as follows:
enable-ecs-log-metadata . The value can be true or false .config-file-type . The value can be s3 or file .config-file-value . The value is either an S3 ARN or a file path.The log router to use.
The container health check command and associated configuration parameters for the container.
The command that the container runs to determine whether it is healthy.
The time period in seconds between each health check execution. The default value is 30 seconds.
The number of times to retry a failed health check before the container is considered unhealthy. The default value is 3.
The optional grace period in seconds that allows containers time to bootstrap before failed health checks count towards the maximum number of retries.
The time period in seconds to wait for a health check to succeed before it is considered a failure. The default value is 5.
The hostname to use for the container.
The image used to start the container.
If set to true, then containerized applications can be deployed that require stdin or a tty to be allocated.
A list of links for the container in the form `` container_name :alias `` . Allows containers to communicate with each other without the need for port mappings.
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities.
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
The Linux capabilities for the container that are added to the default configuration provided by Docker.
The Linux capabilities for the container that are dropped from the default configuration provided by Docker.
The host devices to expose to the container.
A host device to expose to the container.
The path inside the container at which to expose the host device.
The path for the device on the host container instance.
The explicit permissions to provide to the container for the device. By default, the container has permissions for read, write, and mknod for the device.
Whether to run an init process inside the container that forwards signals and reaps processes.
The total amount of swap memory (in MiB) that a container can use.
The value for the size (in MiB) of the /dev/shm volume.
Configures the container's memory swappiness behavior. Determines how aggressively pages are swapped. The higher the value, the more aggressive the swappiness. The default is 60.
The container path, mount options, and size (in MiB) of the tmpfs mount.
The container path, mount options, and size (in MiB) of a tmpfs mount.
The absolute file path where the tmpfs volume is to be mounted.
The list of tmpfs volume mount options.
The maximum size (in MiB) of the tmpfs volume.
The log configuration specification for the container.
The log driver to use for the container.
The configuration options to send to the log driver. Requires version 1.19 of the Docker Remote API or greater on your container instance.
The secrets to pass to the log configuration.
A secret to pass to the log configuration.
The name of the secret.
The secret to expose to the container.
The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
The amount (in MiB) of memory to present to the container. If the container attempts to exceed the memory specified here, the container is shut down. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified.
The soft limit (in MiB) of memory to reserve for the container.
The mount points for the data volumes in the container.
A mount point for the data volumes in the container.
The path on the container to mount the host volume at.
Whether the container has read-only access to the volume.
The name of the volume to mount. Must match the name of a volume listed in VolumeDetails for the task definition.
The name of the container.
The list of port mappings for the container.
A port mapping for the container.
The port number on the container that is bound to the user-specified or automatically assigned host port.
The port number on the container instance to reserve for the container.
The protocol used for the port mapping. The default is tcp .
Whether the container is given elevated privileges on the host container instance. The elevated privileges are similar to the root user.
Whether to allocate a TTY to the container.
Whether the container is given read-only access to its root file system.
The private repository authentication credentials to use.
The ARN of the secret that contains the private repository credentials.
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
A resource to assign to a container.
The type of resource to assign to a container.
The value for the specified resource type.
For GPU , the value is the number of physical GPUs the Amazon ECS container agent reserves for the container.
For InferenceAccelerator , the value should match the DeviceName attribute of an entry in InferenceAccelerators .
The secrets to pass to the container.
A secret to pass to the container.
The name of the secret.
The secret to expose to the container. The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
The number of seconds to wait before giving up on resolving dependencies for a container.
The number of seconds to wait before the container is stopped if it doesn't shut down normally on its own.
A list of namespaced kernel parameters to set in the container.
A namespaced kernel parameter to set in the container.
The namespaced kernel parameter for which to set a value.
The value of the parameter.
A list of ulimits to set in the container.
A ulimit to set in the container.
The hard limit for the ulimit type.
The type of the ulimit.
The soft limit for the ulimit type.
The user to use inside the container.
The value can use one of the following formats.
Data volumes to mount from another container.
A data volume to mount from another container.
Whether the container has read-only access to the volume.
The name of another container within the same task definition from which to mount volumes.
The working directory in which to run commands inside the container.
The number of CPU units used by the task.
The ARN of the task execution role that grants the container agent permission to make API calls on behalf of the container user.
The name of a family that this task definition is registered to.
The Elastic Inference accelerators to use for the containers in the task.
An Elastic Inference accelerator to use for the containers in the task.
The Elastic Inference accelerator device name.
The Elastic Inference accelerator type to use.
The IPC resource namespace to use for the containers in the task.
The amount (in MiB) of memory used by the task.
The Docker networking mode to use for the containers in the task.
The process namespace to use for the containers in the task.
The placement constraint objects to use for tasks.
A placement constraint object to use for tasks.
A cluster query language expression to apply to the constraint.
The type of constraint.
The configuration details for the App Mesh proxy.
The name of the container that will serve as the App Mesh proxy.
The set of network configuration parameters to provide to the Container Network Interface (CNI) plugin, specified as key-value pairs.
A network configuration parameter to provide to the Container Network Interface (CNI) plugin.
The name of the property.
The value of the property.
The proxy type.
The task launch types that the task definition was validated against.
The short name or ARN of the IAM role that grants containers in the task permission to call Amazon Web Services API operations on your behalf.
The data volume definitions for the task.
A data volume to mount from another container.
Information about a Docker volume.
Whether to create the Docker volume automatically if it does not already exist.
The Docker volume driver to use.
A map of Docker driver-specific options that are passed through.
Custom metadata to add to the Docker volume.
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are provisioned automatically when the task starts and destroyed when the task stops. Docker volumes that are shared persist after the task stops.
Information about the Amazon Elastic File System file system that is used for task storage.
The authorization configuration details for the Amazon EFS file system.
The Amazon EFS access point identifier to use.
Whether to use the Amazon ECS task IAM role defined in a task definition when mounting the Amazon EFS file system.
The Amazon EFS file system identifier to use.
The directory within the Amazon EFS file system to mount as the root directory inside the host.
Whether to enable encryption for Amazon EFS data in transit between the Amazon ECS host and the Amazon EFS server.
The port to use when sending encrypted data between the Amazon ECS host and the Amazon EFS server.
Information about a bind mount host volume.
The path on the host container instance that is presented to the container.
The name of the data volume.
Details about a container resource related to a finding.
The runtime of the container.
The name of the container related to a finding.
The identifier of the container image related to a finding.
The name of the container image related to a finding.
Indicates when the container started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Provides information about the mounting of a volume in a container.
Describes the mounting of a volume in a container.
The name of the volume.
The path in the container at which the volume should be mounted.
When this parameter is true , the container is given elevated privileges on the host container instance (similar to the root user).
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
Other object to populate the fields that are missing from the type-specific object.Other .Details about an RDS event notification subscription.
The identifier of the account that is associated with the event notification subscription.
The identifier of the event notification subscription.
Whether the event notification subscription is enabled.
The list of event categories for the event notification subscription.
The ARN of the event notification subscription.
The ARN of the SNS topic to post the event notifications to.
A list of source identifiers for the event notification subscription.
The source type for the event notification subscription.
The status of the event notification subscription.
Valid values: creating | modifying | deleting | active | no-permission | topic-not-exist
The datetime when the event notification subscription was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Details about a service within an ECS cluster.
The capacity provider strategy that the service uses.
Strategy item for the capacity provider strategy that the service uses.
The minimum number of tasks to run on the capacity provider. Only one strategy item can specify a value for Base .
The value must be between 0 and 100000.
The short name of the capacity provider.
The relative percentage of the total number of tasks that should use the capacity provider.
If no weight is specified, the default value is 0. At least one capacity provider must have a weight greater than 0.
The value can be between 0 and 1000.
The ARN of the cluster that hosts the service.
Deployment parameters for the service. Includes the number of tasks that run and the order in which to start and stop tasks.
Determines whether a service deployment fails if a service cannot reach a steady state.
Whether to enable the deployment circuit breaker logic for the service.
Whether to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
For a service that uses the rolling update (ECS ) deployment type, the maximum number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, and for tasks that use the EC2 launch type, when any container instances are in the DRAINING state. Provided as a percentage of the desired number of tasks. The default value is 200%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types, and tasks that use the EC2 launch type, the maximum number of tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the maximum percent value is not used.
For a service that uses the rolling update (ECS ) deployment type, the minimum number of tasks in a service that must remain in the RUNNING state during a deployment, and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Expressed as a percentage of the desired number of tasks. The default value is 100%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the minimum healthy percent value is not used.
Contains the deployment controller type that the service uses.
The rolling update (ECS ) deployment type replaces the current running version of the container with the latest version.
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model that is powered by CodeDeploy. This deployment model a new deployment of a service can be verified before production traffic is sent to it.
The external (EXTERNAL ) deployment type allows the use of any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
Valid values: ECS | CODE_DEPLOY | EXTERNAL
The number of instantiations of the task definition to run on the service.
Whether to enable Amazon ECS managed tags for the tasks in the service.
Whether the execute command functionality is enabled for the service.
After a task starts, the amount of time in seconds that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks.
The launch type that the service uses.
Valid values: EC2 | FARGATE | EXTERNAL
Information about the load balancers that the service uses.
Information about a load balancer that the service uses.
The name of the container to associate with the load balancer.
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
The name of the load balancer to associate with the Amazon ECS service or task set.
Only specified when using a Classic Load Balancer. For an Application Load Balancer or a Network Load Balancer, the load balancer name is omitted.
The ARN of the Elastic Load Balancing target group or groups associated with a service or task set.
Only specified when using an Application Load Balancer or a Network Load Balancer. For a Classic Load Balancer, the target group ARN is omitted.
The name of the service.
For tasks that use the awsvpc networking mode, the VPC subnet and security group configuration.
The VPC subnet and security group configuration.
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
Valid values: ENABLED | DISABLED
The IDs of the security groups associated with the task or service.
You can provide up to five security groups.
The IDs of the subnets associated with the task or service.
You can provide up to 16 subnets.
The placement constraints for the tasks in the service.
A placement constraint for the tasks in the service.
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance .
The type of constraint. Use distinctInstance to run each task in a particular group on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
Valid values: distinctInstance | memberOf
Information about how tasks for the service are placed.
A placement strategy that determines how to place the tasks for the service.
The field to apply the placement strategy against.
For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone .
For the binpack placement strategy, valid values are cpu and memory .
For the random placement strategy, this attribute is not used.
The type of placement strategy.
The random placement strategy randomly places tasks on available candidates.
The spread placement strategy spreads placement across available candidates evenly based on the value of Field .
The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified in Field .
Valid values: random | spread | binpack
The platform version on which to run the service. Only specified for tasks that are hosted on Fargate. If a platform version is not specified, the LATEST platform version is used by default.
Indicates whether to propagate the tags from the task definition to the task or from the service to the task. If no value is provided, then tags are not propagated.
Valid values: TASK_DEFINITION | SERVICE
The ARN of the IAM role that is associated with the service. The role allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
The scheduling strategy to use for the service.
The REPLICA scheduling strategy places and maintains the desired number of tasks across the cluster. By default, the service scheduler spreads tasks across Availability Zones. Task placement strategies and constraints are used to customize task placement decisions.
The DAEMON scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that are specified in the cluster. The service scheduler also evaluates the task placement constraints for running tasks and stops tasks that do not meet the placement constraints.
Valid values: REPLICA | DAEMON
The ARN of the service.
The name of the service.
The name can contain up to 255 characters. It can use letters, numbers, underscores, and hyphens.
Information about the service discovery registries to assign to the service.
Information about a service discovery registry to assign to the service.
The container name value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
The port value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
The port value to use for a service discovery service that specifies an SRV record. This field can be used if both the awsvpc awsvpc network mode and SRV records are used.
The ARN of the service registry.
The task definition to use for tasks in the service.
Provides details about a launch configuration.
For Auto Scaling groups that run in a VPC, specifies whether to assign a public IP address to the group's instances.
Specifies the block devices for the instance.
A block device for the instance.
The device name that is exposed to the EC2 instance. For example, /dev/sdh or xvdh .
Parameters that are used to automatically set up Amazon EBS volumes when an instance is launched.
Whether to delete the volume when the instance is terminated.
Whether to encrypt the volume.
The number of input/output (I/O) operations per second (IOPS) to provision for the volume.
Only supported for gp3 or io1 volumes. Required for io1 volumes. Not used with standard , gp2 , st1 , or sc1 volumes.
The snapshot ID of the volume to use.
You must specify either VolumeSize or SnapshotId .
The volume size, in GiBs. The following are the supported volumes sizes for each volume type:
You must specify either SnapshotId or VolumeSize . If you specify both SnapshotId and VolumeSize , the volume size must be equal or greater than the size of the snapshot.
The volume type.
Whether to suppress the device that is included in the block device mapping of the Amazon Machine Image (AMI).
If NoDevice is true , then you cannot specify Ebs .>
The name of the virtual device (for example, ephemeral0 ).
You can provide either VirtualName or Ebs , but not both.
The identifier of a ClassicLink-enabled VPC that EC2-Classic instances are linked to.
The identifiers of one or more security groups for the VPC that is specified in ClassicLinkVPCId .
The creation date and time for the launch configuration.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Whether the launch configuration is optimized for Amazon EBS I/O.
The name or the ARN of the instance profile associated with the IAM role for the instance. The instance profile contains the IAM role.
The identifier of the Amazon Machine Image (AMI) that is used to launch EC2 instances.
Indicates the type of monitoring for instances in the group.
If set to true , then instances in the group launch with detailed monitoring.
If set to false , then instances in the group launch with basic monitoring.
The instance type for the instances.
The identifier of the kernel associated with the AMI.
The name of the key pair.
The name of the launch configuration.
The tenancy of the instance. An instance with dedicated tenancy runs on isolated, single-tenant hardware and can only be launched into a VPC.
The identifier of the RAM disk associated with the AMI.
The security groups to assign to the instances in the Auto Scaling group.
The maximum hourly price to be paid for any Spot Instance that is launched to fulfill the request.
The user data to make available to the launched EC2 instances. Must be base64-encoded text.
The metadata options for the instances.
Enables or disables the HTTP metadata endpoint on your instances. By default, the metadata endpoint is enabled.
The HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
Indicates whether token usage is required or optional for metadata requests. By default, token usage is optional .
Details about an Amazon EC2 VPN connection.
The identifier of the VPN connection.
The current state of the VPN connection.
The identifier of the customer gateway that is at your end of the VPN connection.
The configuration information for the VPN connection's customer gateway, in the native XML format.
The type of VPN connection.
The identifier of the virtual private gateway that is at the Amazon Web Services side of the VPN connection.
The category of the VPN connection. VPN indicates an Amazon Web Services VPN connection. VPN-Classic indicates an Amazon Web Services Classic VPN connection.
Information about the VPN tunnel.
Information about the VPN tunnel.
The number of accepted routes.
The ARN of the VPN tunnel endpoint certificate.
The date and time of the last change in status.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The Internet-routable IP address of the virtual private gateway's outside interface.
The status of the VPN tunnel.
If an error occurs, a description of the error.
The VPN connection options.
Whether the VPN connection uses static routes only.
The VPN tunnel options.
The VPN tunnel options.
The number of seconds after which a Dead Peer Detection (DPD) timeout occurs.
The Internet Key Exchange (IKE) versions that are permitted for the VPN tunnel.
The external IP address of the VPN tunnel.
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.
The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.
The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.
The lifetime for phase 1 of the IKE negotiation, in seconds.
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.
The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.
The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.
The lifetime for phase 2 of the IKE negotiation, in seconds.
The preshared key to establish initial authentication between the virtual private gateway and the customer gateway.
The percentage of the rekey window, which is determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.
The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.
The number of packets in an IKE replay window.
The range of inside IPv4 addresses for the tunnel.
The static routes that are associated with the VPN connection.
A static routes associated with the VPN connection.
The CIDR block associated with the local subnet of the customer data center.
The current state of the static route.
The identifier of the transit gateway that is associated with the VPN connection.
Information about an Amazon ECR image.
The Amazon Web Services account identifier that is associated with the registry that the image belongs to.
The name of the repository that the image belongs to.
The architecture of the image.
The sha256 digest of the image manifest.
The list of tags that are associated with the image.
The date and time when the image was pushed to the repository.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Details about an Amazon OpenSearch Service domain.
The ARN of the OpenSearch Service domain.
IAM policy document that specifies the access policies for the OpenSearch Service domain.
The name of the endpoint.
The identifier of the domain.
The domain endpoint.
The version of the domain engine.
Details about the configuration for encryption at rest.
Whether encryption at rest is enabled.
The KMS key ID.
Details about the configuration for node-to-node encryption.
Whether node-to-node encryption is enabled.
Information about the status of a domain relative to the latest service software.
The epoch time when the deployment window closes for required updates. After this time, OpenSearch Service schedules the software upgrade automatically.
Whether a request to update the domain can be canceled.
The version of the service software that is currently installed on the domain.
A more detailed description of the service software status.
The most recent version of the service software.
Whether a service software update is available for the domain.
The status of the service software update.
Whether the service software update is optional.
Details about the configuration of an OpenSearch cluster.
The number of data nodes to use in the OpenSearch domain.
Whether UltraWarm is enabled.
The number of UltraWarm instances.
Whether to use a dedicated master node for the OpenSearch domain. A dedicated master node performs cluster management tasks, but does not hold data or respond to data upload requests.
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
The number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
The instance type for your data nodes.
The type of UltraWarm instance.
Whether to enable zone awareness for the OpenSearch domain. When zone awareness is enabled, OpenSearch Service allocates the cluster's nodes and replica index shards across Availability Zones (AZs) in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
The hardware configuration of the computer that hosts the dedicated master node.
If this attribute is specified, then DedicatedMasterEnabled must be true .
Additional options for the domain endpoint.
The ARN for the security certificate. The certificate is managed in ACM.
Whether to enable a custom endpoint for the domain.
Whether to require that all traffic to the domain arrive over HTTPS.
The fully qualified URL for the custom endpoint.
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
Information that OpenSearch Service derives based on VPCOptions for the domain.
The list of security group IDs that are associated with the VPC endpoints for the domain.
A list of subnet IDs that are associated with the VPC endpoints for the domain.
Configures the CloudWatch Logs to publish for the OpenSearch domain.
Configures the OpenSearch index logs publishing.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
Configures the OpenSearch search slow log publishing.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
Configures the OpenSearch audit logs publishing.
The ARN of the CloudWatch Logs group to publish the logs to.
Whether the log publishing is enabled.
The domain endpoints. Used if the OpenSearch domain resides in a VPC.
This is a map of key-value pairs. The key is always vpc . The value is the endpoint.
Specifies options for fine-grained access control.
Enables fine-grained access control.
Enables the internal user database.
Specifies information about the master user of the domain.
The Amazon Resource Name (ARN) for the master user.
The username for the master user.
The password for the master user.
Details about the service configuration for a VPC endpoint service.
Whether requests from other Amazon Web Services accounts to create an endpoint to the service must first be accepted.
The Availability Zones where the service is available.
The DNS names for the service.
Whether the service manages its VPC endpoints.
The ARNs of the Gateway Load Balancers for the service.
The ARNs of the Network Load Balancers for the service.
The private DNS name for the service.
The identifier of the service.
The name of the service.
The current state of the service.
The types for the service.
The service type information for a VPC endpoint service.
The type of service.
Information about the encryption configuration for X-Ray.
The identifier of the KMS key that is used for encryption. Provided if Type is KMS .
The current status of the encryption configuration. When Status is UPDATING , X-Ray might use both the old and new encryption.
The type of encryption. KMS indicates that the encryption uses KMS keys. NONE indicates to use the default encryption.
Details about a rate-based rule for global resources.
The name of the metrics for the rate-based rule.
The name of the rate-based rule.
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
The unique identifier for the rate-based rule.
The predicates to include in the rate-based rule.
A match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
The unique identifier for the predicate.
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
The type of predicate.
Details about a rate-based rule for Regional resources.
The name of the metrics for the rate-based rule.
The name of the rate-based rule.
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
The unique identifier for the rate-based rule.
The predicates to include in the rate-based rule.
Details for a match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
The unique identifier for the predicate.
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
The type of predicate.
Information about an Amazon Elastic Container Registry repository.
The ARN of the repository.
The image scanning configuration for a repository.
Whether to scan images after they are pushed to a repository.
The tag mutability setting for the repository.
Information about the lifecycle policy for the repository.
The text of the lifecycle policy.
The Amazon Web Services account identifier that is associated with the registry that contains the repository.
The name of the repository.
The text of the repository policy.
Details about an Amazon EKS cluster.
The ARN of the cluster.
The certificate authority data for the cluster.
The status of the cluster.
The endpoint for the Amazon EKS API server.
The name of the cluster.
The VPC configuration used by the cluster control plane.
The security groups that are associated with the cross-account elastic network interfaces that are used to allow communication between your nodes and the Amazon EKS control plane.
The subnets that are associated with the cluster.
The ARN of the IAM role that provides permissions for the Amazon EKS control plane to make calls to Amazon Web Services API operations on your behalf.
The Amazon EKS server version for the cluster.
The logging configuration for the cluster.
Cluster logging configurations.
Details for a cluster logging configuration.
Whether the logging types that are listed in Types are enabled.
A list of logging types.
Details about an Network Firewall firewall policy.
The firewall policy configuration.
The stateful rule groups that are used in the firewall policy.
A stateful rule group that is used by the firewall policy.
The ARN of the stateful rule group.
The custom action definitions that are available to use in the firewall policy's StatelessDefaultActions setting.
A custom action that can be used for stateless packet handling.
The definition of the custom action.
Information about metrics to publish to CloudWatch.
Defines CloudWatch dimension values to publish.
Defines a CloudWatch dimension value to publish.
The value to use for the custom metric dimension.
The name of the custom action.
The actions to take on a packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
The actions to take on a fragmented UDP packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
The stateless rule groups that are used in the firewall policy.
A stateless rule group that is used by the firewall policy.
The order in which to run the stateless rule group.
The ARN of the stateless rule group.
The ARN of the firewall policy.
The identifier of the firewall policy.
The name of the firewall policy.
A description of the firewall policy.
Details about an Network Firewall firewall.
Whether the firewall is protected from deletion. If set to true , then the firewall cannot be deleted.
A description of the firewall.
The ARN of the firewall.
The identifier of the firewall.
A descriptive name of the firewall.
The ARN of the firewall policy.
Whether the firewall is protected from a change to the firewall policy. If set to true , you cannot associate a different policy with the firewall.
Whether the firewall is protected from a change to the subnet associations. If set to true , you cannot map different subnets to the firewall.
The public subnets that Network Firewall uses for the firewall. Each subnet must belong to a different Availability Zone.
A public subnet that Network Firewall uses for the firewall.
The identifier of the subnet
The identifier of the VPC where the firewall is used.
Details about an Network Firewall rule group.
The maximum number of operating resources that this rule group can use.
A description of the rule group.
Details about the rule group.
Additional settings to use in the specified rules.
A list of IP addresses and address ranges, in CIDR notation.
The list of IP addresses and ranges.
A list of port ranges.
The list of port ranges.
The rules and actions for the rule group.
For stateful rule groups, can contain RulesString , RulesSourceList , or StatefulRules .
For stateless rule groups, contains StatelessRulesAndCustomActions .
Stateful inspection criteria for a domain list rule group. A domain list rule group determines access by specific protocols to specific domains.
Indicates whether to allow or deny access to the domains listed in Targets .
The protocols that you want to inspect. Specify LS_SNI for HTTPS. Specify HTTP_HOST for HTTP. You can specify either or both.
The domains that you want to inspect for in your traffic flows. You can provide full domain names, or use the '.' prefix as a wildcard. For example, .example.com matches all domains that end with example.com .
Stateful inspection criteria, provided in Suricata compatible intrusion prevention system (IPS) rules.
Suricata rule specifications.
A Suricata rule specification.
Defines what Network Firewall should do with the packets in a traffic flow when the flow matches the stateful rule criteria.
The stateful inspection criteria for the rule.
The destination IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
The destination port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
The direction of traffic flow to inspect. If set to ANY , the inspection matches bidirectional traffic, both from the source to the destination and from the destination to the source. If set to FORWARD , the inspection only matches traffic going from the source to the destination.
The protocol to inspect for. To inspector for all protocols, use IP .
The source IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
The source port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
Additional options for the rule.
A rule option for a stateful rule.
A keyword to look for.
A list of settings.
The stateless rules and custom actions used by a stateless rule group.
Custom actions for the rule group.
A custom action definition. A custom action is an optional, non-standard action to use for stateless packet handling.
The definition of a custom action.
Information about metrics to publish to CloudWatch.
Defines CloudWatch dimension values to publish.
Defines a CloudWatch dimension value to publish.
The value to use for the custom metric dimension.
A descriptive name of the custom action.
Stateless rules for the rule group.
A stateless rule in the rule group.
Indicates the order in which to run this rule relative to all of the rules in the stateless rule group.
Provides the definition of the stateless rule.
The actions to take on a packet that matches one of the stateless rule definition's match attributes. You must specify a standard action (aws:pass , aws:drop , or aws:forward_to_sfe ). You can then add custom actions.
The criteria for Network Firewall to use to inspect an individual packet in a stateless rule inspection.
A list of port ranges to specify the destination ports to inspect for.
A port range to specify the destination ports to inspect for.
The starting port value for the port range.
The ending port value for the port range.
The destination IP addresses and address ranges to inspect for, in CIDR notation.
A destination IP address or range.
An IP address or a block of IP addresses.
The protocols to inspect for.
A list of port ranges to specify the source ports to inspect for.
A port range to specify the source ports to inspect for.
The starting port value for the port range.
The ending port value for the port range.
The source IP addresses and address ranges to inspect for, in CIDR notation.
A source IP addresses and address range to inspect for.
An IP address or a block of IP addresses.
The TCP flags and masks to inspect for.
A set of TCP flags and masks to inspect for.
Defines the flags from the Masks setting that must be set in order for the packet to match. Flags that are listed must be set. Flags that are not listed must not be set.
The set of flags to consider in the inspection. If not specified, then all flags are inspected.
The ARN of the rule group.
The identifier of the rule group.
The descriptive name of the rule group.
The type of rule group. A rule group can be stateful or stateless.
Details about an Amazon RDS DB security group.
The ARN for the DB security group.
Provides the description of the DB security group.
Specifies the name of the DB security group.
Contains a list of EC2 security groups.
EC2 security group information for an RDS DB security group.
Specifies the ID for the EC2 security group.
Specifies the name of the EC2 security group.
Provides the Amazon Web Services ID of the owner of the EC2 security group.
Provides the status of the EC2 security group.
Contains a list of IP ranges.
IP range information for an RDS DB security group.
Specifies the IP range.
Specifies the status of the IP range.
Provides the Amazon Web Services ID of the owner of a specific DB security group.
Provides VPC ID associated with the DB security group.
Details about an Amazon Kinesis data stream.
The name of the Kinesis stream. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the stream name.
The Amazon Resource Name (ARN) of the Kinesis data stream.
When specified, enables or updates server-side encryption using an KMS key for a specified stream. Removing this property from your stack template and updating your stack disables encryption.
The encryption type to use.
The globally unique identifier for the customer-managed KMS key to use for encryption.
The number of shards that the stream uses.
The number of hours for the data records that are stored in shards to remain accessible.
Details about an Amazon EC2 transit gateway that interconnects your virtual private clouds (VPC) and on-premises networks.
The ID of the transit gateway.
The description of the transit gateway.
Turn on or turn off automatic propagation of routes to the default propagation route table.
Turn on or turn off automatic acceptance of attachment requests.
Turn on or turn off automatic association with the default association route table.
The transit gateway Classless Inter-Domain Routing (CIDR) blocks.
The ID of the default association route table.
The ID of the default propagation route table.
Turn on or turn off Equal Cost Multipath Protocol (ECMP) support.
Turn on or turn off DNS support.
Indicates whether multicast is supported on the transit gateway.
A private Autonomous System Number (ASN) for the Amazon side of a BGP session.
Details about an Amazon EFS access point. An access point is an application-specific view into an EFS file system that applies an operating system user and group, and a file system path, to any file system request made through the access point.
The ID of the Amazon EFS access point.
The Amazon Resource Name (ARN) of the Amazon EFS access point.
The opaque string specified in the request to ensure idempotent creation.
The ID of the Amazon EFS file system that the access point applies to.
The full POSIX identity, including the user ID, group ID, and secondary group IDs on the access point, that is used for all file operations by NFS clients using the access point.
The POSIX group ID used for all file system operations using this access point.
Secondary POSIX group IDs used for all file system operations using this access point.
The POSIX user ID used for all file system operations using this access point.
The directory on the Amazon EFS file system that the access point exposes as the root directory to NFS clients using the access point.
Specifies the POSIX IDs and permissions to apply to the access point's root directory.
Specifies the POSIX group ID to apply to the root directory.
Specifies the POSIX user ID to apply to the root directory.
Specifies the POSIX permissions to apply to the root directory, in the format of an octal number representing the file's mode bits.
Specifies the path on the Amazon EFS file system to expose as the root directory to NFS clients using the access point to access the EFS file system. A path can have up to four subdirectories. If the specified path does not exist, you are required to provide CreationInfo .
Details about an CloudFormation stack. A stack is a collection of Amazon Web Services resources that you can manage as a single unit.
The capabilities allowed in the stack.
The time at which the stack was created.
A user-defined description associated with the stack.
Boolean to enable or disable rollback on stack creation failures.
Information about whether a stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters.
Status of the stack's actual configuration compared to its expected template configuration.
Whether termination protection is enabled for the stack.
The time the nested stack was last updated. This field will only be returned if the stack has been updated at least once.
The Amazon Resource Names (ARNs) of the Amazon SNS topic to which stack-related events are published.
A list of output structures.
Provides information about the CloudFormation stack output.
A user-defined description associated with the output.
The key associated with the output.
The value associated with the output.
The ARN of an IAM role that's associated with the stack.
Unique identifier of the stack.
The name associated with the stack.
Current status of the stack.
Success or failure message associated with the stack status.
The length of time, in minutes, that CloudFormation waits for the nested stack to reach the CREATE_COMPLETE state.
Details about an Amazon CloudWatch alarm. An alarm allows you to monitor and receive alerts about your Amazon Web Services resources and applications across multiple Regions.
Indicates whether actions should be executed during any changes to the alarm state.
The list of actions, specified as Amazon Resource Names (ARNs) to execute when this alarm transitions into an ALARM state from any other state.
The ARN of the alarm.
The time stamp of the last update to the alarm configuration.
The description of the alarm.
The name of the alarm. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the alarm name.
The arithmetic operation to use when comparing the specified statistic and threshold. The specified statistic value is used as the first operand.
The number of datapoints that must be breaching to trigger the alarm.
The dimensions for the metric associated with the alarm.
Details about the dimensions for the metric associated with the alarm.
The name of a dimension.
The value of a dimension.
Used only for alarms based on percentiles. If ignore , the alarm state does not change during periods with too few data points to be statistically significant. If evaluate or this parameter is not used, the alarm is always evaluated and possibly changes state no matter how many data points are available.
The number of periods over which data is compared to the specified threshold.
The percentile statistic for the metric associated with the alarm.
The actions to execute when this alarm transitions to the INSUFFICIENT_DATA state from any other state. Each action is specified as an ARN.
The name of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you use Metrics instead and you can't specify MetricName .
The namespace of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you can't specify Namespace and you use Metrics instead.
The actions to execute when this alarm transitions to the OK state from any other state. Each action is specified as an ARN.
The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric.
The statistic for the metric associated with the alarm, other than percentile. For percentile statistics, use ExtendedStatistic .
For an alarm based on a metric, you must specify either Statistic or ExtendedStatistic but not both.
For an alarm based on a math expression, you can't specify Statistic . Instead, you use Metrics .
The value to compare with the specified statistic.
n an alarm based on an anomaly detection model, this is the ID of the ANOMALY_DETECTION_BAND function used as the threshold for the alarm.
Sets how this alarm is to handle missing data points.
The unit of the metric associated with the alarm.
Details about an Amazon EC2 VPC peering connection. A VPC peering connection is a networking connection between two VPCs that enables you to route traffic between them privately.
Information about the accepter VPC.
The IPv4 CIDR block for the VPC.
Information about the IPv4 CIDR blocks for the VPC.
Provides details about the IPv4 CIDR blocks for the VPC.
The IPv4 CIDR block for the VPC.
The IPv6 CIDR block for the VPC.
Provides details about the IPv6 CIDR blocks for the VPC.
The IPv6 CIDR block for the VPC.
The ID of the Amazon Web Services account that owns the VPC.
Information about the VPC peering connection options for the accepter or requester VPC.
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
The Amazon Web Services Region in which the VPC is located.
The ID of the VPC.
The time at which an unaccepted VPC peering connection will expire.
Information about the requester VPC.
The IPv4 CIDR block for the VPC.
Information about the IPv4 CIDR blocks for the VPC.
Provides details about the IPv4 CIDR blocks for the VPC.
The IPv4 CIDR block for the VPC.
The IPv6 CIDR block for the VPC.
Provides details about the IPv6 CIDR blocks for the VPC.
The IPv6 CIDR block for the VPC.
The ID of the Amazon Web Services account that owns the VPC.
Information about the VPC peering connection options for the accepter or requester VPC.
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
The Amazon Web Services Region in which the VPC is located.
The ID of the VPC.
The status of the VPC peering connection.
The status of the VPC peering connection.
A message that provides more information about the status, if applicable.
The ID of the VPC peering connection.
Details about an WAF rule group for Regional resources.
A name for the metrics for this rule group.
The descriptive name of the rule group.
The ID of the rule group.
Provides information about the rule statements used to identify the web requests that you want to allow, block, or count.
Provides information about the rules attached to a rule group
The action that WAF should take on a web request when it matches the criteria defined in the rule.
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
The ID for a rule.
The type of rule in the rule group.
Details about an WAF rule for Regional resources.
A name for the metrics for the rule.
A descriptive name for the rule.
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
The type of predicate in a rule, such as ByteMatch or IPSet .
The ID of the rule.
Details about an WAF web access control list (web ACL) for Regional resources.
The action to perform if none of the rules contained in the web ACL match.
A name for the metrics for this web ACL.
A descriptive name for the web ACL.
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
A combination of ByteMatchSet , IPSet , and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count.
The action that AWS WAF takes when a web request matches all conditions in the rule, such as allow, block, or count the request.
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
Overrides the rule evaluation result in the rule group.
Overrides the rule evaluation result in the rule group.
The order in which WAF evaluates the rules in a web ACL.
The ID of an WAF Regional rule to associate with a web ACL.
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
The ID of the web ACL.
Details about an WAF rule for global resources.
The name of the metrics for this rule.
A descriptive name for the rule.
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
The type of predicate in a rule, such as ByteMatch or IPSet .
The ID of the WAF rule.
Details about an WAF rule group for global resources.
The name of the metrics for this rule group.
The name of the rule group.
The ID of the rule group.
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
Provides information about what action WAF should take on a web request when it matches the criteria defined in the rule.
The action that WAF should take on a web request when it matches the rule's statement.
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
The rule ID for a rule.
The type of rule.
Details about a task in a cluster.
The Amazon Resource Name (ARN) of the cluster that hosts the task.
The ARN of the task definition that creates the task.
The version counter for the task.
The Unix timestamp for the time when the task was created. More specifically, it's for the time when the task entered the PENDING state.
The Unix timestamp for the time when the task started. More specifically, it's for the time when the task transitioned from the PENDING state to the RUNNING state.
The tag specified when a task is started. If an Amazon ECS service started the task, the startedBy parameter contains the deployment ID of that service.
The name of the task group that's associated with the task.
Details about the data volume that is used in a task definition.
Provides information about a data volume that's used in a task definition.
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
This parameter is specified when you use bind mount host volumes. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it's stored.
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that's presented to the container.
The containers that are associated with the task.
Provides information about an Amazon ECS container.
The name of the container.
The image used for the container.
The mount points for data volumes in your container.
Details for a volume mount point that's used in a container definition.
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
The path on the container to mount the host volume at.
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
The result of a standards check.
The valid values for Status are as follows.
PASSED - Standards check passed for all evaluated resources.WARNING - Some information is missing or this check is not supported for your configuration.FAILED - Standards check failed for at least one evaluated resource.NOT_AVAILABLE - Check could not be performed due to a service outage, API error, or because the result of the Config evaluation was NOT_APPLICABLE . If the Config evaluation result was NOT_APPLICABLE , then after 3 days, Security Hub automatically archives the finding.For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
Provides additional context for the value of Compliance.Status .
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
The corresponding description for the status reason code.
Indicates the veracity of a finding.
The workflow state of a finding.
Provides information about the status of the investigation into a finding.
The status of the investigation into the finding. The workflow status is specific to an individual finding. It does not affect the generation of new findings. For example, setting the workflow status to SUPPRESSED or RESOLVED does not prevent a new finding for the same issue.
The allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .ComplianceStatus changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that you notified the resource owner about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner.SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The finding is no longer updated.RESOLVED - The finding was reviewed and remediated and is now considered resolved.The record state of a finding.
A list of related findings.
Details about a related finding.
The ARN of the product that generated a related finding.
The product-generated identifier for a related finding.
A user-defined note added to a finding.
The text of a note.
The principal that created a note.
The timestamp of when the note was updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Provides a list of vulnerabilities associated with the findings.
A vulnerability associated with a finding.
The identifier of the vulnerability.
List of software packages that have the vulnerability.
Information about a software package.
The name of the software package.
The version of the software package.
The epoch of the software package.
The release of the software package.
The architecture used for the software package.
The source of the package.
The file system path to the package manager inventory file.
CVSS scores from the advisory related to the vulnerability.
CVSS scores from the advisory related to the vulnerability.
The version of CVSS for the CVSS score.
The base CVSS score.
The base scoring vector for the CVSS score.
The origin of the original CVSS score and vector.
Adjustments to the CVSS metrics.
An adjustment to the CVSS metric.
The metric to adjust.
The reason for the adjustment.
List of vulnerabilities that are related to this vulnerability.
Information about the vendor that generates the vulnerability report.
The name of the vendor.
The URL of the vulnerability advisory.
The severity that the vendor assigned to the vulnerability.
Indicates when the vulnerability advisory was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the vulnerability advisory was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
A list of URLs that provide additional information about the vulnerability.
Provides an overview of the patch compliance status for an instance against a selected compliance standard.
The identifier of the compliance standard that was used to determine the patch compliance status.
The number of patches from the compliance standard that were installed successfully.
The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.
The number of patches from the compliance standard that failed to install.
The number of installed patches that are not part of the compliance standard.
The number of patches that are installed but are also on a list of patches that the customer rejected.
The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.
Indicates when the operation started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Indicates when the operation completed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
The reboot option specified for the instance.
The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL .
Provides details about an action that affects or that was taken on a resource.
The type of action that was detected. The possible action types are:
NETWORK_CONNECTIONAWS_API_CALLDNS_REQUESTPORT_PROBEIncluded if ActionType is NETWORK_CONNECTION . Provides details about the network connection that was detected.
The direction of the network connection request (IN or OUT ).
Information about the remote IP address that issued the network connection request.
The IP address.
The internet service provider (ISP) organization associated with the remote IP address.
The Autonomous System Number (ASN) of the internet provider
The name of the organization that registered the ASN.
The ISP information for the internet provider.
The name of the internet provider.
The country where the remote IP address is located.
The 2-letter ISO 3166 country code for the country.
The name of the country.
The city where the remote IP address is located.
The name of the city.
The coordinates of the location of the remote IP address.
The longitude of the location.
The latitude of the location.
Information about the port on the remote IP address.
The number of the port.
The port name of the remote connection.
Information about the port on the EC2 instance.
The number of the port.
The port name of the local connection.
The protocol used to make the network connection request.
Indicates whether the network connection attempt was blocked.
Included if ActionType is AWS_API_CALL . Provides details about the API call that was detected.
The name of the API method that was issued.
The name of the Amazon Web Services service that the API method belongs to.
Indicates whether the API call originated from a remote IP address (remoteip ) or from a DNS domain (domain ).
Provided if CallerType is remoteIp . Provides information about the remote IP address that the API call originated from.
The IP address.
The internet service provider (ISP) organization associated with the remote IP address.
The Autonomous System Number (ASN) of the internet provider
The name of the organization that registered the ASN.
The ISP information for the internet provider.
The name of the internet provider.
The country where the remote IP address is located.
The 2-letter ISO 3166 country code for the country.
The name of the country.
The city where the remote IP address is located.
The name of the city.
The coordinates of the location of the remote IP address.
The longitude of the location.
The latitude of the location.
Provided if CallerType is domain . Provides information about the DNS domain that the API call originated from.
The name of the DNS domain that issued the API call.
Identifies the resources that were affected by the API call.
An ISO8601-formatted timestamp that indicates when the API call was first observed.
An ISO8601-formatted timestamp that indicates when the API call was most recently observed.
Included if ActionType is DNS_REQUEST . Provides details about the DNS request that was detected.
The DNS domain that is associated with the DNS request.
The protocol that was used for the DNS request.
Indicates whether the DNS request was blocked.
Included if ActionType is PORT_PROBE . Provides details about the port probe that was detected.
Information about the ports affected by the port probe.
A port scan that was part of the port probe. For each scan, PortProbeDetails provides information about the local IP address and port that were scanned, and the remote IP address that the scan originated from.
Provides information about the port that was scanned.
The number of the port.
The port name of the local connection.
Provides information about the IP address where the scanned port is located.
The IP address.
Provides information about the remote IP address that performed the scan.
The IP address.
The internet service provider (ISP) organization associated with the remote IP address.
The Autonomous System Number (ASN) of the internet provider
The name of the organization that registered the ASN.
The ISP information for the internet provider.
The name of the internet provider.
The country where the remote IP address is located.
The 2-letter ISO 3166 country code for the country.
The name of the country.
The city where the remote IP address is located.
The name of the city.
The coordinates of the location of the remote IP address.
The longitude of the location.
The latitude of the location.
Indicates whether the port probe was blocked.
In a BatchImportFindings request, finding providers use FindingProviderFields to provide and update their own values for confidence, criticality, related findings, severity, and types.
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A list of findings that are related to the current finding.
Details about a related finding.
The ARN of the product that generated a related finding.
The product-generated identifier for a related finding.
The severity of a finding.
The severity label assigned to the finding by the finding provider.
The finding provider's original value for the severity.
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
Indicates whether the finding is a sample finding.
{
'FailedCount': 123,
'SuccessCount': 123,
'FailedFindings': [
{
'Id': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
The number of findings that failed to import.
The number of findings that were successfully imported.
The list of findings that failed to import.
The list of the findings that cannot be imported. For each finding, the list provides the error.
The identifier of the finding that could not be updated.
The code of the error returned by the BatchImportFindings operation.
The message of the error returned by the BatchImportFindings operation.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionbatch_update_findings(**kwargs)¶Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.
ConfidenceCriticalityNoteRelatedFindingsSeverityTypesUserDefinedFieldsVerificationStateWorkflowYou can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.batch_update_findings(
FindingIdentifiers=[
{
'Id': 'string',
'ProductArn': 'string'
},
],
Note={
'Text': 'string',
'UpdatedBy': 'string'
},
Severity={
'Normalized': 123,
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL'
},
VerificationState='UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
Confidence=123,
Criticality=123,
Types=[
'string',
],
UserDefinedFields={
'string': 'string'
},
Workflow={
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
RelatedFindings=[
{
'ProductArn': 'string',
'Id': 'string'
},
]
)
[REQUIRED]
The list of findings to update. BatchUpdateFindings can be used to update up to 100 findings at a time.
For each finding, the list provides the finding identifier and the ARN of the finding provider.
Identifies a finding to update using BatchUpdateFindings .
The identifier of the finding that was specified by the finding provider.
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
The updated note.
The updated note text.
The principal that updated the note.
Used to update the finding severity.
The normalized severity for the finding. This attribute is to be deprecated in favor of Label .
If you provide Normalized and do not provide Label , Label is set automatically as follows.
INFORMATIONALLOWMEDIUMHIGHCRITICALThe native severity as defined by the Amazon Web Services service or integrated partner product that generated the finding.
The severity value of the finding. The allowed values are the following.
INFORMATIONAL - No issue was found.LOW - The issue does not require action on its own.MEDIUM - The issue must be addressed but not urgently.HIGH - The issue must be addressed as a priority.CRITICAL - The issue must be remediated immediately to avoid it escalating.Indicates the veracity of a finding.
The available values for VerificationState are as follows.
UNKNOWN – The default disposition of a security findingTRUE_POSITIVE – The security finding is confirmedFALSE_POSITIVE – The security finding was determined to be a false alarmBENIGN_POSITIVE – A special case of TRUE_POSITIVE where the finding doesn't pose any threat, is expected, or bothThe updated value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
The updated value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are as follows.
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Used to update the workflow status of a finding.
The workflow status indicates the progress of the investigation into the finding.
The status of the investigation into the finding. The workflow status is specific to an individual finding. It does not affect the generation of new findings. For example, setting the workflow status to SUPPRESSED or RESOLVED does not prevent a new finding for the same issue.
The allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets WorkFlowStatus from NOTIFIED or RESOLVED to NEW in the following cases:ARCHIVED to ACTIVE .PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that you notified the resource owner about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner.RESOLVED - The finding was reviewed and remediated and is now considered resolved.SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The finding is no longer updated.A list of findings that are related to the updated findings.
Details about a related finding.
The ARN of the product that generated a related finding.
The product-generated identifier for a related finding.
dict
Response Syntax
{
'ProcessedFindings': [
{
'Id': 'string',
'ProductArn': 'string'
},
],
'UnprocessedFindings': [
{
'FindingIdentifier': {
'Id': 'string',
'ProductArn': 'string'
},
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
ProcessedFindings (list) --
The list of findings that were updated successfully.
(dict) --
Identifies a finding to update using BatchUpdateFindings .
Id (string) --
The identifier of the finding that was specified by the finding provider.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
UnprocessedFindings (list) --
The list of findings that were not updated.
(dict) --
A finding from a BatchUpdateFindings request that Security Hub was unable to update.
FindingIdentifier (dict) --
The identifier of the finding that was not updated.
Id (string) --
The identifier of the finding that was specified by the finding provider.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
ErrorCode (string) --
The code associated with the error.
ErrorMessage (string) --
The message associated with the error.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptioncan_paginate(operation_name)¶Check if an operation can be paginated.
create_foo, and you'd normally invoke the
operation as client.create_foo(**kwargs), if the
create_foo operation can be paginated, you can use the
call client.get_paginator("create_foo").True if the operation can be paginated,
False otherwise.close()¶Closes underlying endpoint connections.
create_action_target(**kwargs)¶Creates a custom action target in Security Hub.
You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
See also: AWS API Documentation
Request Syntax
response = client.create_action_target(
Name='string',
Description='string',
Id='string'
)
[REQUIRED]
The name of the custom action target. Can contain up to 20 characters.
[REQUIRED]
The description for the custom action target.
[REQUIRED]
The ID for the custom action target. Can contain up to 20 alphanumeric characters.
dict
Response Syntax
{
'ActionTargetArn': 'string'
}
Response Structure
(dict) --
ActionTargetArn (string) --
The ARN for the custom action target.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceConflictExceptioncreate_finding_aggregator(**kwargs)¶Used to enable finding aggregation. Must be called from the aggregation Region.
For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_finding_aggregator(
RegionLinkingMode='string',
Regions=[
'string',
]
)
[REQUIRED]
Indicates whether to aggregate findings from all of the available Regions in the current partition. Also determines whether to automatically aggregate findings from new Regions as Security Hub supports them and you opt into them.
The selected option also determines how to use the Regions provided in the Regions list.
The options are as follows:
ALL_REGIONS - Indicates to aggregate findings from all of the Regions where Security Hub is enabled. When you choose this option, Security Hub also automatically aggregates findings from new Regions as Security Hub supports them and you opt into them.ALL_REGIONS_EXCEPT_SPECIFIED - Indicates to aggregate findings from all of the Regions where Security Hub is enabled, except for the Regions listed in the Regions parameter. When you choose this option, Security Hub also automatically aggregates findings from new Regions as Security Hub supports them and you opt into them.SPECIFIED_REGIONS - Indicates to aggregate findings only from the Regions listed in the Regions parameter. Security Hub does not automatically aggregate findings from new Regions.If RegionLinkingMode is ALL_REGIONS_EXCEPT_SPECIFIED , then this is a comma-separated list of Regions that do not aggregate findings to the aggregation Region.
If RegionLinkingMode is SPECIFIED_REGIONS , then this is a comma-separated list of Regions that do aggregate findings to the aggregation Region.
dict
Response Syntax
{
'FindingAggregatorArn': 'string',
'FindingAggregationRegion': 'string',
'RegionLinkingMode': 'string',
'Regions': [
'string',
]
}
Response Structure
(dict) --
FindingAggregatorArn (string) --
The ARN of the finding aggregator. You use the finding aggregator ARN to retrieve details for, update, and stop finding aggregation.
FindingAggregationRegion (string) --
The aggregation Region.
RegionLinkingMode (string) --
Indicates whether to link all Regions, all Regions except for a list of excluded Regions, or a list of included Regions.
Regions (list) --
The list of excluded Regions or included Regions.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionSecurityHub.Client.exceptions.InvalidInputExceptioncreate_insight(**kwargs)¶Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
To group the related findings in the insight, use the GroupByAttribute .
See also: AWS API Documentation
Request Syntax
response = client.create_insight(
Name='string',
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
GroupByAttribute='string'
)
[REQUIRED]
The name of the custom insight to create.
[REQUIRED]
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Web Services account ID that a finding is generated in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Region from which the finding was generated.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAn ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's description.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe type of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe state of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the process.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe path to the process executable.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSpecifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services external Region name where this resource is located.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of Amazon Web Services tags associated with a resource at the time the finding was processed.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The instance type of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the principal that is associated with an IAM access key.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of an IAM user.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the container related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe veracity of a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe updated record state for the finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe text of a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding identifier of a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider value for the severity label.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider's original value for the severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceOne or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates whether or not sample findings are included in the filter results.
Boolean filter for querying findings.
The value of the boolean.
[REQUIRED]
The attribute used to group the findings for the insight. The grouping attribute identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
dict
Response Syntax
{
'InsightArn': 'string'
}
Response Structure
(dict) --
InsightArn (string) --
The ARN of the insight created.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceConflictExceptioncreate_members(**kwargs)¶Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.
CreateMembersis always used to add accounts that are not organization members.
For accounts that are managed using Organizations, CreateMembers is only used in the following cases:
This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.
For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.
Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.
A permissions policy is added that permits the administrator account to view the findings generated in the member account.
To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.
See also: AWS API Documentation
Request Syntax
response = client.create_members(
AccountDetails=[
{
'AccountId': 'string',
'Email': 'string'
},
]
)
[REQUIRED]
The list of accounts to associate with the Security Hub administrator account. For each account, the list includes the account ID and optionally the email address.
The details of an Amazon Web Services account.
The ID of an Amazon Web Services account.
The email of an Amazon Web Services account.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of Amazon Web Services accounts that were not processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceConflictExceptiondecline_invitations(**kwargs)¶Declines invitations to become a member account.
This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
See also: AWS API Documentation
Request Syntax
response = client.decline_invitations(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs for the accounts from which to decline the invitations to Security Hub.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of Amazon Web Services accounts that were not processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondelete_action_target(**kwargs)¶Deletes a custom action target from Security Hub.
Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
See also: AWS API Documentation
Request Syntax
response = client.delete_action_target(
ActionTargetArn='string'
)
[REQUIRED]
The ARN of the custom action target to delete.
{
'ActionTargetArn': 'string'
}
Response Structure
The ARN of the custom action target that was deleted.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondelete_finding_aggregator(**kwargs)¶Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.
When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.
See also: AWS API Documentation
Request Syntax
response = client.delete_finding_aggregator(
FindingAggregatorArn='string'
)
[REQUIRED]
The ARN of the finding aggregator to delete. To obtain the ARN, use ListFindingAggregators .
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondelete_insight(**kwargs)¶Deletes the insight specified by the InsightArn .
See also: AWS API Documentation
Request Syntax
response = client.delete_insight(
InsightArn='string'
)
[REQUIRED]
The ARN of the insight to delete.
{
'InsightArn': 'string'
}
Response Structure
The ARN of the insight that was deleted.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondelete_invitations(**kwargs)¶Deletes invitations received by the Amazon Web Services account to become a member account.
This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
See also: AWS API Documentation
Request Syntax
response = client.delete_invitations(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of the account IDs that sent the invitations to delete.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of Amazon Web Services accounts for which the invitations were not deleted. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionSecurityHub.Client.exceptions.InvalidAccessExceptiondelete_members(**kwargs)¶Deletes the specified member accounts from Security Hub.
Can be used to delete member accounts that belong to an organization as well as member accounts that were invited manually.
See also: AWS API Documentation
Request Syntax
response = client.delete_members(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs for the member accounts to delete.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of Amazon Web Services accounts that were not deleted. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondescribe_action_targets(**kwargs)¶Returns a list of the custom action targets in Security Hub in your account.
See also: AWS API Documentation
Request Syntax
response = client.describe_action_targets(
ActionTargetArns=[
'string',
],
NextToken='string',
MaxResults=123
)
A list of custom action target ARNs for the custom action targets to retrieve.
The token that is required for pagination. On your first call to the DescribeActionTargets operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'ActionTargets': [
{
'ActionTargetArn': 'string',
'Name': 'string',
'Description': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ActionTargets (list) --
A list of ActionTarget objects. Each object includes the ActionTargetArn , Description , and Name of a custom action target available in Security Hub.
(dict) --
An ActionTarget object.
ActionTargetArn (string) --
The ARN for the target action.
Name (string) --
The name of the action target.
Description (string) --
The description of the target action.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondescribe_hub(**kwargs)¶Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.describe_hub(
HubArn='string'
)
{
'HubArn': 'string',
'SubscribedAt': 'string',
'AutoEnableControls': True|False
}
Response Structure
The ARN of the Hub resource that was retrieved.
The date and time when Security Hub was enabled in the account.
Whether to automatically enable new controls when they are added to standards that are enabled.
If set to true , then new controls for enabled standards are enabled automatically. If set to false , then new controls are not enabled.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondescribe_organization_configuration()¶Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.
See also: AWS API Documentation
Request Syntax
response = client.describe_organization_configuration()
{
'AutoEnable': True|False,
'MemberAccountLimitReached': True|False,
'AutoEnableStandards': 'NONE'|'DEFAULT'
}
Response Structure
Whether to automatically enable Security Hub for new accounts in the organization.
If set to true , then Security Hub is enabled for new accounts. If set to false, then new accounts are not added automatically.
Whether the maximum number of allowed member accounts are already associated with the Security Hub administrator account.
Whether to automatically enable Security Hub default standards for new member accounts in the organization.
The default value of this parameter is equal to DEFAULT .
If equal to DEFAULT , then Security Hub default standards are automatically enabled for new member accounts. If equal to NONE , then default standards are not automatically enabled for new member accounts.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptiondescribe_products(**kwargs)¶Returns information about product integrations in Security Hub.
You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
If you do not provide an integration ARN, then the results include all of the available product integrations.
See also: AWS API Documentation
Request Syntax
response = client.describe_products(
NextToken='string',
MaxResults=123,
ProductArn='string'
)
The token that is required for pagination. On your first call to the DescribeProducts operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Products': [
{
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Description': 'string',
'Categories': [
'string',
],
'IntegrationTypes': [
'SEND_FINDINGS_TO_SECURITY_HUB'|'RECEIVE_FINDINGS_FROM_SECURITY_HUB'|'UPDATE_FINDINGS_IN_SECURITY_HUB',
],
'MarketplaceUrl': 'string',
'ActivationUrl': 'string',
'ProductSubscriptionResourcePolicy': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Products (list) --
A list of products, including details for each product.
(dict) --
Contains details about a product.
ProductArn (string) --
The ARN assigned to the product.
ProductName (string) --
The name of the product.
CompanyName (string) --
The name of the company that provides the product.
Description (string) --
A description of the product.
Categories (list) --
The categories assigned to the product.
IntegrationTypes (list) --
The types of integration that the product supports. Available values are the following.
SEND_FINDINGS_TO_SECURITY_HUB - The integration sends findings to Security Hub.RECEIVE_FINDINGS_FROM_SECURITY_HUB - The integration receives findings from Security Hub.UPDATE_FINDINGS_IN_SECURITY_HUB - The integration does not send new findings to Security Hub, but does make updates to the findings that it receives from Security Hub.MarketplaceUrl (string) --
For integrations with Amazon Web Services services, the Amazon Web Services Console URL from which to activate the service.
For integrations with third-party products, the Amazon Web Services Marketplace URL from which to subscribe to or purchase the product.
ActivationUrl (string) --
The URL to the service or product documentation about the integration with Security Hub, including how to activate the integration.
ProductSubscriptionResourcePolicy (string) --
The resource policy associated with the product.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.InvalidInputExceptiondescribe_standards(**kwargs)¶Returns a list of the available standards in Security Hub.
For each standard, the results include the standard ARN, the name, and a description.
See also: AWS API Documentation
Request Syntax
response = client.describe_standards(
NextToken='string',
MaxResults=123
)
The token that is required for pagination. On your first call to the DescribeStandards operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Standards': [
{
'StandardsArn': 'string',
'Name': 'string',
'Description': 'string',
'EnabledByDefault': True|False
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Standards (list) --
A list of available standards.
(dict) --
Provides information about a specific standard.
StandardsArn (string) --
The ARN of a standard.
Name (string) --
The name of the standard.
Description (string) --
A description of the standard.
EnabledByDefault (boolean) --
Whether the standard is enabled by default. When Security Hub is enabled from the console, if a standard is enabled by default, the check box for that standard is selected by default.
When Security Hub is enabled using the EnableSecurityHub API operation, the standard is enabled by default unless EnableDefaultStandards is set to false .
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptiondescribe_standards_controls(**kwargs)¶Returns a list of security standards controls.
For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
See also: AWS API Documentation
Request Syntax
response = client.describe_standards_controls(
StandardsSubscriptionArn='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The ARN of a resource that represents your subscription to a supported standard. To get the subscription ARNs of the standards you have enabled, use the GetEnabledStandards operation.
The token that is required for pagination. On your first call to the DescribeStandardsControls operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Controls': [
{
'StandardsControlArn': 'string',
'ControlStatus': 'ENABLED'|'DISABLED',
'DisabledReason': 'string',
'ControlStatusUpdatedAt': datetime(2015, 1, 1),
'ControlId': 'string',
'Title': 'string',
'Description': 'string',
'RemediationUrl': 'string',
'SeverityRating': 'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'RelatedRequirements': [
'string',
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Controls (list) --
A list of security standards controls.
(dict) --
Details for an individual security standard control.
StandardsControlArn (string) --
The ARN of the security standard control.
ControlStatus (string) --
The current status of the security standard control. Indicates whether the control is enabled or disabled. Security Hub does not check against disabled controls.
DisabledReason (string) --
The reason provided for the most recent change in status for the control.
ControlStatusUpdatedAt (datetime) --
The date and time that the status of the security standard control was most recently updated.
ControlId (string) --
The identifier of the security standard control.
Title (string) --
The title of the security standard control.
Description (string) --
The longer description of the security standard control. Provides information about what the control is checking for.
RemediationUrl (string) --
A link to remediation information for the control in the Security Hub user documentation.
SeverityRating (string) --
The severity of findings generated from this security standard control.
The finding severity is based on an assessment of how easy it would be to compromise Amazon Web Services resources if the issue is detected.
RelatedRequirements (list) --
The list of requirements that are related to this control.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondisable_import_findings_for_product(**kwargs)¶Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.disable_import_findings_for_product(
ProductSubscriptionArn='string'
)
[REQUIRED]
The ARN of the integrated product to disable the integration for.
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptiondisable_organization_admin_account(**kwargs)¶Disables a Security Hub administrator account. Can only be called by the organization management account.
See also: AWS API Documentation
Request Syntax
response = client.disable_organization_admin_account(
AdminAccountId='string'
)
[REQUIRED]
The Amazon Web Services account identifier of the Security Hub administrator account.
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptiondisable_security_hub()¶Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
If you want to save your existing findings, you must export them before you disable Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.disable_security_hub()
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondisassociate_from_administrator_account()¶Disassociates the current Security Hub member account from the associated administrator account.
This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_from_administrator_account()
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondisassociate_from_master_account()¶This method is deprecated. Instead, use DisassociateFromAdministratorAccount .
The Security Hub console continues to use DisassociateFromMasterAccount . It will eventually change to use DisassociateFromAdministratorAccount . Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount . You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount .
Disassociates the current Security Hub member account from the associated administrator account.
This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_from_master_account()
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiondisassociate_members(**kwargs)¶Disassociates the specified member accounts from the associated administrator account.
Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_members(
AccountIds=[
'string',
]
)
[REQUIRED]
The account IDs of the member accounts to disassociate from the administrator account.
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionenable_import_findings_for_product(**kwargs)¶Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
See also: AWS API Documentation
Request Syntax
response = client.enable_import_findings_for_product(
ProductArn='string'
)
[REQUIRED]
The ARN of the product to enable the integration for.
{
'ProductSubscriptionArn': 'string'
}
Response Structure
The ARN of your subscription to the product to enable integrations for.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceConflictExceptionSecurityHub.Client.exceptions.LimitExceededExceptionenable_organization_admin_account(**kwargs)¶Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.
See also: AWS API Documentation
Request Syntax
response = client.enable_organization_admin_account(
AdminAccountId='string'
)
[REQUIRED]
The Amazon Web Services account identifier of the account to designate as the Security Hub administrator account.
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionenable_security_hub(**kwargs)¶Enables Security Hub for your account in the current Region or the Region you specify in the request.
When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards.
You do not enable the Payment Card Industry Data Security Standard (PCI DSS) standard.
To not enable the automatically enabled standards, set EnableDefaultStandards to false .
After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
To learn more, see the setup information in the Security Hub User Guide .
See also: AWS API Documentation
Request Syntax
response = client.enable_security_hub(
Tags={
'string': 'string'
},
EnableDefaultStandards=True|False
)
The tags to add to the hub resource when you enable Security Hub.
EnableDefaultStandards , it is set to true . To not enable the automatically enabled standards, set EnableDefaultStandards to false .dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceConflictExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionget_administrator_account()¶Provides the details for the Security Hub administrator account for the current member account.
Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
See also: AWS API Documentation
Request Syntax
response = client.get_administrator_account()
{
'Administrator': {
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
}
}
Response Structure
Details about an invitation.
The account ID of the Security Hub administrator account that the invitation was sent from.
The ID of the invitation sent to the member account.
The timestamp of when the invitation was sent.
The current status of the association between the member and administrator accounts.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_enabled_standards(**kwargs)¶Returns a list of the standards that are currently enabled.
See also: AWS API Documentation
Request Syntax
response = client.get_enabled_standards(
StandardsSubscriptionArns=[
'string',
],
NextToken='string',
MaxResults=123
)
The list of the standards subscription ARNs for the standards to retrieve.
The token that is required for pagination. On your first call to the GetEnabledStandards operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE',
'StandardsStatusReason': {
'StatusReasonCode': 'NO_AVAILABLE_CONFIGURATION_RECORDER'|'INTERNAL_ERROR'
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
StandardsSubscriptions (list) --
The list of StandardsSubscriptions objects that include information about the enabled standards.
(dict) --
A resource that represents your subscription to a supported standard.
StandardsSubscriptionArn (string) --
The ARN of a resource that represents your subscription to a supported standard.
StandardsArn (string) --
The ARN of a standard.
StandardsInput (dict) --
A key-value pair of input for the standard.
StandardsStatus (string) --
The status of the standard subscription.
The status values are as follows:
PENDING - Standard is in the process of being enabled.READY - Standard is enabled.INCOMPLETE - Standard could not be enabled completely. Some controls may not be available.DELETING - Standard is in the process of being disabled.FAILED - Standard could not be disabled.StandardsStatusReason (dict) --
The reason for the current status.
StatusReasonCode (string) --
The reason code that represents the reason for the current status of a standard subscription.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionget_finding_aggregator(**kwargs)¶Returns the current finding aggregation configuration.
See also: AWS API Documentation
Request Syntax
response = client.get_finding_aggregator(
FindingAggregatorArn='string'
)
[REQUIRED]
The ARN of the finding aggregator to return details for. To obtain the ARN, use ListFindingAggregators .
{
'FindingAggregatorArn': 'string',
'FindingAggregationRegion': 'string',
'RegionLinkingMode': 'string',
'Regions': [
'string',
]
}
Response Structure
The ARN of the finding aggregator.
The aggregation Region.
Indicates whether to link all Regions, all Regions except for a list of excluded Regions, or a list of included Regions.
The list of excluded Regions or included Regions.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_findings(**kwargs)¶Returns a list of findings that match the specified criteria.
If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
See also: AWS API Documentation
Request Syntax
response = client.get_findings(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
SortCriteria=[
{
'Field': 'string',
'SortOrder': 'asc'|'desc'
},
],
NextToken='string',
MaxResults=123
)
The finding attributes used to define a condition to filter the returned findings.
You can filter by up to 10 finding attributes. For each attribute, you can provide up to 20 filter values.
Note that in the available filter fields, WorkflowState is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Web Services account ID that a finding is generated in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Region from which the finding was generated.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAn ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's description.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe type of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe state of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the process.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe path to the process executable.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSpecifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services external Region name where this resource is located.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of Amazon Web Services tags associated with a resource at the time the finding was processed.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The instance type of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the principal that is associated with an IAM access key.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of an IAM user.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the container related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe veracity of a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe updated record state for the finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe text of a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding identifier of a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider value for the severity label.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider's original value for the severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceOne or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates whether or not sample findings are included in the filter results.
Boolean filter for querying findings.
The value of the boolean.
The finding attributes used to sort the list of returned findings.
A collection of finding attributes used to sort findings.
The finding attribute used to sort findings.
The order used to sort findings.
The token that is required for pagination. On your first call to the GetFindings operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Findings': [
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Region': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'Threats': [
{
'Name': 'string',
'Severity': 'string',
'ItemCount': 123,
'FilePaths': [
{
'FilePath': 'string',
'FileName': 'string',
'ResourceId': 'string',
'Hash': 'string'
},
]
},
],
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'ResourceRole': 'string',
'Tags': {
'string': 'string'
},
'DataClassification': {
'DetailedResultsLocation': 'string',
'Result': {
'MimeType': 'string',
'SizeClassified': 123,
'AdditionalOccurrences': True|False,
'Status': {
'Code': 'string',
'Reason': 'string'
},
'SensitiveData': [
{
'Category': 'string',
'Detections': [
{
'Count': 123,
'Type': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
},
],
'CustomDataIdentifiers': {
'Detections': [
{
'Count': 123,
'Arn': 'string',
'Name': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
}
}
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string',
'MixedInstancesPolicy': {
'InstancesDistribution': {
'OnDemandAllocationStrategy': 'string',
'OnDemandBaseCapacity': 123,
'OnDemandPercentageAboveBaseCapacity': 123,
'SpotAllocationStrategy': 'string',
'SpotInstancePools': 123,
'SpotMaxPrice': 'string'
},
'LaunchTemplate': {
'LaunchTemplateSpecification': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'Overrides': [
{
'InstanceType': 'string',
'WeightedCapacity': 'string'
},
]
}
},
'AvailabilityZones': [
{
'Value': 'string'
},
],
'LaunchTemplate': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'CapacityRebalance': True|False
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Artifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
],
'Environment': {
'Certificate': 'string',
'EnvironmentVariables': [
{
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
],
'PrivilegedMode': True|False,
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'LogsConfig': {
'CloudWatchLogs': {
'GroupName': 'string',
'Status': 'string',
'StreamName': 'string'
},
'S3Logs': {
'EncryptionDisabled': True|False,
'Location': 'string',
'Status': 'string'
}
},
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'SecondaryArtifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
]
},
'AwsCloudFrontDistribution': {
'CacheBehaviors': {
'Items': [
{
'ViewerProtocolPolicy': 'string'
},
]
},
'DefaultCacheBehavior': {
'ViewerProtocolPolicy': 'string'
},
'DefaultRootObject': 'string',
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string',
'S3OriginConfig': {
'OriginAccessIdentity': 'string'
},
'CustomOriginConfig': {
'HttpPort': 123,
'HttpsPort': 123,
'OriginKeepaliveTimeout': 123,
'OriginProtocolPolicy': 'string',
'OriginReadTimeout': 123,
'OriginSslProtocols': {
'Items': [
'string',
],
'Quantity': 123
}
}
},
]
},
'OriginGroups': {
'Items': [
{
'FailoverCriteria': {
'StatusCodes': {
'Items': [
123,
],
'Quantity': 123
}
}
},
]
},
'ViewerCertificate': {
'AcmCertificateArn': 'string',
'Certificate': 'string',
'CertificateSource': 'string',
'CloudFrontDefaultCertificate': True|False,
'IamCertificateId': 'string',
'MinimumProtocolVersion': 'string',
'SslSupportMethod': 'string'
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string',
'NetworkInterfaces': [
{
'NetworkInterfaceId': 'string'
},
],
'VirtualizationType': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpProtocolIpv6': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string',
'InstanceMetadataTags': 'string'
}
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False,
'IpV6Addresses': [
{
'IpV6Address': 'string'
},
],
'PrivateIpAddresses': [
{
'PrivateIpAddress': 'string',
'PrivateDnsName': 'string'
},
],
'PublicDnsName': 'string',
'PublicIp': 'string'
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'DeviceName': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
],
'VolumeId': 'string',
'VolumeType': 'string',
'VolumeScanStatus': 'string'
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsEc2Eip': {
'InstanceId': 'string',
'PublicIp': 'string',
'AllocationId': 'string',
'AssociationId': 'string',
'Domain': 'string',
'PublicIpv4Pool': 'string',
'NetworkBorderGroup': 'string',
'NetworkInterfaceId': 'string',
'NetworkInterfaceOwnerId': 'string',
'PrivateIpAddress': 'string'
},
'AwsEc2Subnet': {
'AssignIpv6AddressOnCreation': True|False,
'AvailabilityZone': 'string',
'AvailabilityZoneId': 'string',
'AvailableIpAddressCount': 123,
'CidrBlock': 'string',
'DefaultForAz': True|False,
'MapPublicIpOnLaunch': True|False,
'OwnerId': 'string',
'State': 'string',
'SubnetArn': 'string',
'SubnetId': 'string',
'VpcId': 'string',
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
]
},
'AwsEc2NetworkAcl': {
'IsDefault': True|False,
'NetworkAclId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'Associations': [
{
'NetworkAclAssociationId': 'string',
'NetworkAclId': 'string',
'SubnetId': 'string'
},
],
'Entries': [
{
'CidrBlock': 'string',
'Egress': True|False,
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Ipv6CidrBlock': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'Protocol': 'string',
'RuleAction': 'string',
'RuleNumber': 123
},
]
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string',
'LoadBalancerAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'AwsElasticBeanstalkEnvironment': {
'ApplicationName': 'string',
'Cname': 'string',
'DateCreated': 'string',
'DateUpdated': 'string',
'Description': 'string',
'EndpointUrl': 'string',
'EnvironmentArn': 'string',
'EnvironmentId': 'string',
'EnvironmentLinks': [
{
'EnvironmentName': 'string',
'LinkName': 'string'
},
],
'EnvironmentName': 'string',
'OptionSettings': [
{
'Namespace': 'string',
'OptionName': 'string',
'ResourceName': 'string',
'Value': 'string'
},
],
'PlatformArn': 'string',
'SolutionStackName': 'string',
'Status': 'string',
'Tier': {
'Name': 'string',
'Type': 'string',
'Version': 'string'
},
'VersionLabel': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'ElasticsearchClusterConfig': {
'DedicatedMasterCount': 123,
'DedicatedMasterEnabled': True|False,
'DedicatedMasterType': 'string',
'InstanceCount': 123,
'InstanceType': 'string',
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'ZoneAwarenessEnabled': True|False
},
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string'
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'OwnerAccountId': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
},
'BucketLifecycleConfiguration': {
'Rules': [
{
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
},
'ExpirationDate': 'string',
'ExpirationInDays': 123,
'ExpiredObjectDeleteMarker': True|False,
'Filter': {
'Predicate': {
'Operands': [
{
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
},
],
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
}
},
'ID': 'string',
'NoncurrentVersionExpirationInDays': 123,
'NoncurrentVersionTransitions': [
{
'Days': 123,
'StorageClass': 'string'
},
],
'Prefix': 'string',
'Status': 'string',
'Transitions': [
{
'Date': 'string',
'Days': 123,
'StorageClass': 'string'
},
]
},
]
},
'PublicAccessBlockConfiguration': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AccessControlList': 'string',
'BucketLoggingConfiguration': {
'DestinationBucketName': 'string',
'LogFilePrefix': 'string'
},
'BucketWebsiteConfiguration': {
'ErrorDocument': 'string',
'IndexDocumentSuffix': 'string',
'RedirectAllRequestsTo': {
'Hostname': 'string',
'Protocol': 'string'
},
'RoutingRules': [
{
'Condition': {
'HttpErrorCodeReturnedEquals': 'string',
'KeyPrefixEquals': 'string'
},
'Redirect': {
'Hostname': 'string',
'HttpRedirectCode': 'string',
'Protocol': 'string',
'ReplaceKeyPrefixWith': 'string',
'ReplaceKeyWith': 'string'
}
},
]
},
'BucketNotificationConfiguration': {
'Configurations': [
{
'Events': [
'string',
],
'Filter': {
'S3KeyFilter': {
'FilterRules': [
{
'Name': 'Prefix'|'Suffix',
'Value': 'string'
},
]
}
},
'Destination': 'string',
'Type': 'string'
},
]
},
'BucketVersioningConfiguration': {
'IsMfaDeleteEnabled': True|False,
'Status': 'string'
}
},
'AwsS3AccountPublicAccessBlock': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsSecretsManagerSecret': {
'RotationRules': {
'AutomaticallyAfterDays': 123
},
'RotationOccurredWithinFrequency': True|False,
'KmsKeyId': 'string',
'RotationEnabled': True|False,
'RotationLambdaArn': 'string',
'Deleted': True|False,
'Name': 'string',
'Description': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string',
'AccountId': 'string',
'AccessKeyId': 'string',
'SessionContext': {
'Attributes': {
'MfaAuthenticated': True|False,
'CreationDate': 'string'
},
'SessionIssuer': {
'Type': 'string',
'PrincipalId': 'string',
'Arn': 'string',
'AccountId': 'string',
'UserName': 'string'
}
}
},
'AwsIamUser': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupList': [
'string',
],
'Path': 'string',
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'UserId': 'string',
'UserName': 'string',
'UserPolicyList': [
{
'PolicyName': 'string'
},
]
},
'AwsIamPolicy': {
'AttachmentCount': 123,
'CreateDate': 'string',
'DefaultVersionId': 'string',
'Description': 'string',
'IsAttachable': True|False,
'Path': 'string',
'PermissionsBoundaryUsageCount': 123,
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyVersionList': [
{
'VersionId': 'string',
'IsDefaultVersion': True|False,
'CreateDate': 'string'
},
],
'UpdateDate': 'string'
},
'AwsApiGatewayV2Stage': {
'ClientCertificateId': 'string',
'CreatedDate': 'string',
'Description': 'string',
'DefaultRouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'DeploymentId': 'string',
'LastUpdatedDate': 'string',
'RouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'StageName': 'string',
'StageVariables': {
'string': 'string'
},
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'AutoDeploy': True|False,
'LastDeploymentStatusMessage': 'string',
'ApiGatewayManaged': True|False
},
'AwsApiGatewayV2Api': {
'ApiEndpoint': 'string',
'ApiId': 'string',
'ApiKeySelectionExpression': 'string',
'CreatedDate': 'string',
'Description': 'string',
'Version': 'string',
'Name': 'string',
'ProtocolType': 'string',
'RouteSelectionExpression': 'string',
'CorsConfiguration': {
'AllowOrigins': [
'string',
],
'AllowCredentials': True|False,
'ExposeHeaders': [
'string',
],
'MaxAge': 123,
'AllowMethods': [
'string',
],
'AllowHeaders': [
'string',
]
}
},
'AwsDynamoDbTable': {
'AttributeDefinitions': [
{
'AttributeName': 'string',
'AttributeType': 'string'
},
],
'BillingModeSummary': {
'BillingMode': 'string',
'LastUpdateToPayPerRequestDateTime': 'string'
},
'CreationDateTime': 'string',
'GlobalSecondaryIndexes': [
{
'Backfilling': True|False,
'IndexArn': 'string',
'IndexName': 'string',
'IndexSizeBytes': 123,
'IndexStatus': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
},
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
}
},
],
'GlobalTableVersion': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'LatestStreamArn': 'string',
'LatestStreamLabel': 'string',
'LocalSecondaryIndexes': [
{
'IndexArn': 'string',
'IndexName': 'string',
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
}
},
],
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
},
'Replicas': [
{
'GlobalSecondaryIndexes': [
{
'IndexName': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
}
},
],
'KmsMasterKeyId': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
},
'RegionName': 'string',
'ReplicaStatus': 'string',
'ReplicaStatusDescription': 'string'
},
],
'RestoreSummary': {
'SourceBackupArn': 'string',
'SourceTableArn': 'string',
'RestoreDateTime': 'string',
'RestoreInProgress': True|False
},
'SseDescription': {
'InaccessibleEncryptionDateTime': 'string',
'Status': 'string',
'SseType': 'string',
'KmsMasterKeyArn': 'string'
},
'StreamSpecification': {
'StreamEnabled': True|False,
'StreamViewType': 'string'
},
'TableId': 'string',
'TableName': 'string',
'TableSizeBytes': 123,
'TableStatus': 'string'
},
'AwsApiGatewayStage': {
'DeploymentId': 'string',
'ClientCertificateId': 'string',
'StageName': 'string',
'Description': 'string',
'CacheClusterEnabled': True|False,
'CacheClusterSize': 'string',
'CacheClusterStatus': 'string',
'MethodSettings': [
{
'MetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0,
'CachingEnabled': True|False,
'CacheTtlInSeconds': 123,
'CacheDataEncrypted': True|False,
'RequireAuthorizationForCacheControl': True|False,
'UnauthorizedCacheControlHeaderStrategy': 'string',
'HttpMethod': 'string',
'ResourcePath': 'string'
},
],
'Variables': {
'string': 'string'
},
'DocumentationVersion': 'string',
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'CanarySettings': {
'PercentTraffic': 123.0,
'DeploymentId': 'string',
'StageVariableOverrides': {
'string': 'string'
},
'UseStageCache': True|False
},
'TracingEnabled': True|False,
'CreatedDate': 'string',
'LastUpdatedDate': 'string',
'WebAclArn': 'string'
},
'AwsApiGatewayRestApi': {
'Id': 'string',
'Name': 'string',
'Description': 'string',
'CreatedDate': 'string',
'Version': 'string',
'BinaryMediaTypes': [
'string',
],
'MinimumCompressionSize': 123,
'ApiKeySource': 'string',
'EndpointConfiguration': {
'Types': [
'string',
]
}
},
'AwsCloudTrailTrail': {
'CloudWatchLogsLogGroupArn': 'string',
'CloudWatchLogsRoleArn': 'string',
'HasCustomEventSelectors': True|False,
'HomeRegion': 'string',
'IncludeGlobalServiceEvents': True|False,
'IsMultiRegionTrail': True|False,
'IsOrganizationTrail': True|False,
'KmsKeyId': 'string',
'LogFileValidationEnabled': True|False,
'Name': 'string',
'S3BucketName': 'string',
'S3KeyPrefix': 'string',
'SnsTopicArn': 'string',
'SnsTopicName': 'string',
'TrailArn': 'string'
},
'AwsSsmPatchCompliance': {
'Patch': {
'ComplianceSummary': {
'Status': 'string',
'CompliantCriticalCount': 123,
'CompliantHighCount': 123,
'CompliantMediumCount': 123,
'ExecutionType': 'string',
'NonCompliantCriticalCount': 123,
'CompliantInformationalCount': 123,
'NonCompliantInformationalCount': 123,
'CompliantUnspecifiedCount': 123,
'NonCompliantLowCount': 123,
'NonCompliantHighCount': 123,
'CompliantLowCount': 123,
'ComplianceType': 'string',
'PatchBaselineId': 'string',
'OverallSeverity': 'string',
'NonCompliantMediumCount': 123,
'NonCompliantUnspecifiedCount': 123,
'PatchGroup': 'string'
}
}
},
'AwsCertificateManagerCertificate': {
'CertificateAuthorityArn': 'string',
'CreatedAt': 'string',
'DomainName': 'string',
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'ExtendedKeyUsages': [
{
'Name': 'string',
'OId': 'string'
},
],
'FailureReason': 'string',
'ImportedAt': 'string',
'InUseBy': [
'string',
],
'IssuedAt': 'string',
'Issuer': 'string',
'KeyAlgorithm': 'string',
'KeyUsages': [
{
'Name': 'string'
},
],
'NotAfter': 'string',
'NotBefore': 'string',
'Options': {
'CertificateTransparencyLoggingPreference': 'string'
},
'RenewalEligibility': 'string',
'RenewalSummary': {
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'RenewalStatus': 'string',
'RenewalStatusReason': 'string',
'UpdatedAt': 'string'
},
'Serial': 'string',
'SignatureAlgorithm': 'string',
'Status': 'string',
'Subject': 'string',
'SubjectAlternativeNames': [
'string',
],
'Type': 'string'
},
'AwsRedshiftCluster': {
'AllowVersionUpgrade': True|False,
'AutomatedSnapshotRetentionPeriod': 123,
'AvailabilityZone': 'string',
'ClusterAvailabilityStatus': 'string',
'ClusterCreateTime': 'string',
'ClusterIdentifier': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIpAddress': 'string',
'PublicIpAddress': 'string'
},
],
'ClusterParameterGroups': [
{
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
],
'ParameterApplyStatus': 'string',
'ParameterGroupName': 'string'
},
],
'ClusterPublicKey': 'string',
'ClusterRevisionNumber': 'string',
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'ManualSnapshotRetentionPeriod': 123,
'RetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterStatus': 'string',
'ClusterSubnetGroupName': 'string',
'ClusterVersion': 'string',
'DBName': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceEndTime': 'string',
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ElasticResizeNumberOfNodeOptions': 'string',
'Encrypted': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123
},
'EnhancedVpcRouting': True|False,
'ExpectedNextSnapshotScheduleTime': 'string',
'ExpectedNextSnapshotScheduleTimeStatus': 'string',
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'IamRoles': [
{
'ApplyStatus': 'string',
'IamRoleArn': 'string'
},
],
'KmsKeyId': 'string',
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'MasterUsername': 'string',
'NextMaintenanceWindowStartTime': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PendingActions': [
'string',
],
'PendingModifiedValues': {
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'ClusterType': 'string',
'ClusterVersion': 'string',
'EncryptionType': 'string',
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PubliclyAccessible': True|False
},
'PreferredMaintenanceWindow': 'string',
'PubliclyAccessible': True|False,
'ResizeInfo': {
'AllowCancelResize': True|False,
'ResizeType': 'string'
},
'RestoreStatus': {
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ProgressInMegaBytes': 123,
'SnapshotSizeInMegaBytes': 123,
'Status': 'string'
},
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'string',
'VpcId': 'string',
'VpcSecurityGroups': [
{
'Status': 'string',
'VpcSecurityGroupId': 'string'
},
],
'LoggingStatus': {
'BucketName': 'string',
'LastFailureMessage': 'string',
'LastFailureTime': 'string',
'LastSuccessfulDeliveryTime': 'string',
'LoggingEnabled': True|False,
'S3KeyPrefix': 'string'
}
},
'AwsElbLoadBalancer': {
'AvailabilityZones': [
'string',
],
'BackendServerDescriptions': [
{
'InstancePort': 123,
'PolicyNames': [
'string',
]
},
],
'CanonicalHostedZoneName': 'string',
'CanonicalHostedZoneNameID': 'string',
'CreatedTime': 'string',
'DnsName': 'string',
'HealthCheck': {
'HealthyThreshold': 123,
'Interval': 123,
'Target': 'string',
'Timeout': 123,
'UnhealthyThreshold': 123
},
'Instances': [
{
'InstanceId': 'string'
},
],
'ListenerDescriptions': [
{
'Listener': {
'InstancePort': 123,
'InstanceProtocol': 'string',
'LoadBalancerPort': 123,
'Protocol': 'string',
'SslCertificateId': 'string'
},
'PolicyNames': [
'string',
]
},
],
'LoadBalancerAttributes': {
'AccessLog': {
'EmitInterval': 123,
'Enabled': True|False,
'S3BucketName': 'string',
'S3BucketPrefix': 'string'
},
'ConnectionDraining': {
'Enabled': True|False,
'Timeout': 123
},
'ConnectionSettings': {
'IdleTimeout': 123
},
'CrossZoneLoadBalancing': {
'Enabled': True|False
},
'AdditionalAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'LoadBalancerName': 'string',
'Policies': {
'AppCookieStickinessPolicies': [
{
'CookieName': 'string',
'PolicyName': 'string'
},
],
'LbCookieStickinessPolicies': [
{
'CookieExpirationPeriod': 123,
'PolicyName': 'string'
},
],
'OtherPolicies': [
'string',
]
},
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'SourceSecurityGroup': {
'GroupName': 'string',
'OwnerAlias': 'string'
},
'Subnets': [
'string',
],
'VpcId': 'string'
},
'AwsIamGroup': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupId': 'string',
'GroupName': 'string',
'GroupPolicyList': [
{
'PolicyName': 'string'
},
],
'Path': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'InstanceProfileList': [
{
'Arn': 'string',
'CreateDate': 'string',
'InstanceProfileId': 'string',
'InstanceProfileName': 'string',
'Path': 'string',
'Roles': [
{
'Arn': 'string',
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'Path': 'string',
'RoleId': 'string',
'RoleName': 'string'
},
]
},
],
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'RoleId': 'string',
'RoleName': 'string',
'RolePolicyList': [
{
'PolicyName': 'string'
},
],
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string',
'Description': 'string',
'KeyRotationStatus': True|False
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'MultiAz': True|False,
'EnhancedMonitoringResourceArn': 'string',
'DbInstanceStatus': 'string',
'MasterUsername': 'string',
'AllocatedStorage': 123,
'PreferredBackupWindow': 'string',
'BackupRetentionPeriod': 123,
'DbSecurityGroups': [
'string',
],
'DbParameterGroups': [
{
'DbParameterGroupName': 'string',
'ParameterApplyStatus': 'string'
},
],
'AvailabilityZone': 'string',
'DbSubnetGroup': {
'DbSubnetGroupName': 'string',
'DbSubnetGroupDescription': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string'
},
'SubnetStatus': 'string'
},
],
'DbSubnetGroupArn': 'string'
},
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'DbInstanceClass': 'string',
'AllocatedStorage': 123,
'MasterUserPassword': 'string',
'Port': 123,
'BackupRetentionPeriod': 123,
'MultiAZ': True|False,
'EngineVersion': 'string',
'LicenseModel': 'string',
'Iops': 123,
'DbInstanceIdentifier': 'string',
'StorageType': 'string',
'CaCertificateIdentifier': 'string',
'DbSubnetGroupName': 'string',
'PendingCloudWatchLogsExports': {
'LogTypesToEnable': [
'string',
],
'LogTypesToDisable': [
'string',
]
},
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
]
},
'LatestRestorableTime': 'string',
'AutoMinorVersionUpgrade': True|False,
'ReadReplicaSourceDBInstanceIdentifier': 'string',
'ReadReplicaDBInstanceIdentifiers': [
'string',
],
'ReadReplicaDBClusterIdentifiers': [
'string',
],
'LicenseModel': 'string',
'Iops': 123,
'OptionGroupMemberships': [
{
'OptionGroupName': 'string',
'Status': 'string'
},
],
'CharacterSetName': 'string',
'SecondaryAvailabilityZone': 'string',
'StatusInfos': [
{
'StatusType': 'string',
'Normal': True|False,
'Status': 'string',
'Message': 'string'
},
],
'StorageType': 'string',
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'CopyTagsToSnapshot': True|False,
'MonitoringInterval': 123,
'MonitoringRoleArn': 'string',
'PromotionTier': 123,
'Timezone': 'string',
'PerformanceInsightsEnabled': True|False,
'PerformanceInsightsKmsKeyId': 'string',
'PerformanceInsightsRetentionPeriod': 123,
'EnabledCloudWatchLogsExports': [
'string',
],
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'ListenerEndpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'MaxAllocatedStorage': 123
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string',
'SqsSuccessFeedbackRoleArn': 'string',
'SqsFailureFeedbackRoleArn': 'string',
'ApplicationSuccessFeedbackRoleArn': 'string',
'FirehoseSuccessFeedbackRoleArn': 'string',
'FirehoseFailureFeedbackRoleArn': 'string',
'HttpSuccessFeedbackRoleArn': 'string',
'HttpFailureFeedbackRoleArn': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsRdsDbSnapshot': {
'DbSnapshotIdentifier': 'string',
'DbInstanceIdentifier': 'string',
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'VpcId': 'string',
'InstanceCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'Iops': 123,
'OptionGroupName': 'string',
'PercentProgress': 123,
'SourceRegion': 'string',
'SourceDbSnapshotIdentifier': 'string',
'StorageType': 'string',
'TdeCredentialArn': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'Timezone': 'string',
'IamDatabaseAuthenticationEnabled': True|False,
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'DbiResourceId': 'string'
},
'AwsRdsDbClusterSnapshot': {
'AvailabilityZones': [
'string',
],
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'VpcId': 'string',
'ClusterCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'PercentProgress': 123,
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterIdentifier': 'string',
'DbClusterSnapshotIdentifier': 'string',
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsRdsDbCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'DatabaseName': 'string',
'Status': 'string',
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'CustomEndpoints': [
'string',
],
'MultiAz': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'Port': 123,
'MasterUsername': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'ClusterCreateTime': 'string',
'EnabledCloudWatchLogsExports': [
'string',
],
'EngineMode': 'string',
'DeletionProtection': True|False,
'HttpEndpointEnabled': True|False,
'ActivityStreamStatus': 'string',
'CopyTagsToSnapshot': True|False,
'CrossAccountClone': True|False,
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'DbClusterParameterGroup': 'string',
'DbSubnetGroup': 'string',
'DbClusterOptionGroupMemberships': [
{
'DbClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'DbClusterIdentifier': 'string',
'DbClusterMembers': [
{
'IsClusterWriter': True|False,
'PromotionTier': 123,
'DbInstanceIdentifier': 'string',
'DbClusterParameterGroupStatus': 'string'
},
],
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsEcsCluster': {
'ClusterArn': 'string',
'ActiveServicesCount': 123,
'CapacityProviders': [
'string',
],
'ClusterSettings': [
{
'Name': 'string',
'Value': 'string'
},
],
'Configuration': {
'ExecuteCommandConfiguration': {
'KmsKeyId': 'string',
'LogConfiguration': {
'CloudWatchEncryptionEnabled': True|False,
'CloudWatchLogGroupName': 'string',
'S3BucketName': 'string',
'S3EncryptionEnabled': True|False,
'S3KeyPrefix': 'string'
},
'Logging': 'string'
}
},
'DefaultCapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'ClusterName': 'string',
'RegisteredContainerInstancesCount': 123,
'RunningTasksCount': 123,
'Status': 'string'
},
'AwsEcsContainer': {
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
'AwsEcsTaskDefinition': {
'ContainerDefinitions': [
{
'Command': [
'string',
],
'Cpu': 123,
'DependsOn': [
{
'Condition': 'string',
'ContainerName': 'string'
},
],
'DisableNetworking': True|False,
'DnsSearchDomains': [
'string',
],
'DnsServers': [
'string',
],
'DockerLabels': {
'string': 'string'
},
'DockerSecurityOptions': [
'string',
],
'EntryPoint': [
'string',
],
'Environment': [
{
'Name': 'string',
'Value': 'string'
},
],
'EnvironmentFiles': [
{
'Type': 'string',
'Value': 'string'
},
],
'Essential': True|False,
'ExtraHosts': [
{
'Hostname': 'string',
'IpAddress': 'string'
},
],
'FirelensConfiguration': {
'Options': {
'string': 'string'
},
'Type': 'string'
},
'HealthCheck': {
'Command': [
'string',
],
'Interval': 123,
'Retries': 123,
'StartPeriod': 123,
'Timeout': 123
},
'Hostname': 'string',
'Image': 'string',
'Interactive': True|False,
'Links': [
'string',
],
'LinuxParameters': {
'Capabilities': {
'Add': [
'string',
],
'Drop': [
'string',
]
},
'Devices': [
{
'ContainerPath': 'string',
'HostPath': 'string',
'Permissions': [
'string',
]
},
],
'InitProcessEnabled': True|False,
'MaxSwap': 123,
'SharedMemorySize': 123,
'Swappiness': 123,
'Tmpfs': [
{
'ContainerPath': 'string',
'MountOptions': [
'string',
],
'Size': 123
},
]
},
'LogConfiguration': {
'LogDriver': 'string',
'Options': {
'string': 'string'
},
'SecretOptions': [
{
'Name': 'string',
'ValueFrom': 'string'
},
]
},
'Memory': 123,
'MemoryReservation': 123,
'MountPoints': [
{
'ContainerPath': 'string',
'ReadOnly': True|False,
'SourceVolume': 'string'
},
],
'Name': 'string',
'PortMappings': [
{
'ContainerPort': 123,
'HostPort': 123,
'Protocol': 'string'
},
],
'Privileged': True|False,
'PseudoTerminal': True|False,
'ReadonlyRootFilesystem': True|False,
'RepositoryCredentials': {
'CredentialsParameter': 'string'
},
'ResourceRequirements': [
{
'Type': 'string',
'Value': 'string'
},
],
'Secrets': [
{
'Name': 'string',
'ValueFrom': 'string'
},
],
'StartTimeout': 123,
'StopTimeout': 123,
'SystemControls': [
{
'Namespace': 'string',
'Value': 'string'
},
],
'Ulimits': [
{
'HardLimit': 123,
'Name': 'string',
'SoftLimit': 123
},
],
'User': 'string',
'VolumesFrom': [
{
'ReadOnly': True|False,
'SourceContainer': 'string'
},
],
'WorkingDirectory': 'string'
},
],
'Cpu': 'string',
'ExecutionRoleArn': 'string',
'Family': 'string',
'InferenceAccelerators': [
{
'DeviceName': 'string',
'DeviceType': 'string'
},
],
'IpcMode': 'string',
'Memory': 'string',
'NetworkMode': 'string',
'PidMode': 'string',
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'ProxyConfiguration': {
'ContainerName': 'string',
'ProxyConfigurationProperties': [
{
'Name': 'string',
'Value': 'string'
},
],
'Type': 'string'
},
'RequiresCompatibilities': [
'string',
],
'TaskRoleArn': 'string',
'Volumes': [
{
'DockerVolumeConfiguration': {
'Autoprovision': True|False,
'Driver': 'string',
'DriverOpts': {
'string': 'string'
},
'Labels': {
'string': 'string'
},
'Scope': 'string'
},
'EfsVolumeConfiguration': {
'AuthorizationConfig': {
'AccessPointId': 'string',
'Iam': 'string'
},
'FilesystemId': 'string',
'RootDirectory': 'string',
'TransitEncryption': 'string',
'TransitEncryptionPort': 123
},
'Host': {
'SourcePath': 'string'
},
'Name': 'string'
},
]
},
'Container': {
'ContainerRuntime': 'string',
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string',
'VolumeMounts': [
{
'Name': 'string',
'MountPath': 'string'
},
],
'Privileged': True|False
},
'Other': {
'string': 'string'
},
'AwsRdsEventSubscription': {
'CustSubscriptionId': 'string',
'CustomerAwsId': 'string',
'Enabled': True|False,
'EventCategoriesList': [
'string',
],
'EventSubscriptionArn': 'string',
'SnsTopicArn': 'string',
'SourceIdsList': [
'string',
],
'SourceType': 'string',
'Status': 'string',
'SubscriptionCreationTime': 'string'
},
'AwsEcsService': {
'CapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'Cluster': 'string',
'DeploymentConfiguration': {
'DeploymentCircuitBreaker': {
'Enable': True|False,
'Rollback': True|False
},
'MaximumPercent': 123,
'MinimumHealthyPercent': 123
},
'DeploymentController': {
'Type': 'string'
},
'DesiredCount': 123,
'EnableEcsManagedTags': True|False,
'EnableExecuteCommand': True|False,
'HealthCheckGracePeriodSeconds': 123,
'LaunchType': 'string',
'LoadBalancers': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'LoadBalancerName': 'string',
'TargetGroupArn': 'string'
},
],
'Name': 'string',
'NetworkConfiguration': {
'AwsVpcConfiguration': {
'AssignPublicIp': 'string',
'SecurityGroups': [
'string',
],
'Subnets': [
'string',
]
}
},
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'PlacementStrategies': [
{
'Field': 'string',
'Type': 'string'
},
],
'PlatformVersion': 'string',
'PropagateTags': 'string',
'Role': 'string',
'SchedulingStrategy': 'string',
'ServiceArn': 'string',
'ServiceName': 'string',
'ServiceRegistries': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'Port': 123,
'RegistryArn': 'string'
},
],
'TaskDefinition': 'string'
},
'AwsAutoScalingLaunchConfiguration': {
'AssociatePublicIpAddress': True|False,
'BlockDeviceMappings': [
{
'DeviceName': 'string',
'Ebs': {
'DeleteOnTermination': True|False,
'Encrypted': True|False,
'Iops': 123,
'SnapshotId': 'string',
'VolumeSize': 123,
'VolumeType': 'string'
},
'NoDevice': True|False,
'VirtualName': 'string'
},
],
'ClassicLinkVpcId': 'string',
'ClassicLinkVpcSecurityGroups': [
'string',
],
'CreatedTime': 'string',
'EbsOptimized': True|False,
'IamInstanceProfile': 'string',
'ImageId': 'string',
'InstanceMonitoring': {
'Enabled': True|False
},
'InstanceType': 'string',
'KernelId': 'string',
'KeyName': 'string',
'LaunchConfigurationName': 'string',
'PlacementTenancy': 'string',
'RamdiskId': 'string',
'SecurityGroups': [
'string',
],
'SpotPrice': 'string',
'UserData': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string'
}
},
'AwsEc2VpnConnection': {
'VpnConnectionId': 'string',
'State': 'string',
'CustomerGatewayId': 'string',
'CustomerGatewayConfiguration': 'string',
'Type': 'string',
'VpnGatewayId': 'string',
'Category': 'string',
'VgwTelemetry': [
{
'AcceptedRouteCount': 123,
'CertificateArn': 'string',
'LastStatusChange': 'string',
'OutsideIpAddress': 'string',
'Status': 'string',
'StatusMessage': 'string'
},
],
'Options': {
'StaticRoutesOnly': True|False,
'TunnelOptions': [
{
'DpdTimeoutSeconds': 123,
'IkeVersions': [
'string',
],
'OutsideIpAddress': 'string',
'Phase1DhGroupNumbers': [
123,
],
'Phase1EncryptionAlgorithms': [
'string',
],
'Phase1IntegrityAlgorithms': [
'string',
],
'Phase1LifetimeSeconds': 123,
'Phase2DhGroupNumbers': [
123,
],
'Phase2EncryptionAlgorithms': [
'string',
],
'Phase2IntegrityAlgorithms': [
'string',
],
'Phase2LifetimeSeconds': 123,
'PreSharedKey': 'string',
'RekeyFuzzPercentage': 123,
'RekeyMarginTimeSeconds': 123,
'ReplayWindowSize': 123,
'TunnelInsideCidr': 'string'
},
]
},
'Routes': [
{
'DestinationCidrBlock': 'string',
'State': 'string'
},
],
'TransitGatewayId': 'string'
},
'AwsEcrContainerImage': {
'RegistryId': 'string',
'RepositoryName': 'string',
'Architecture': 'string',
'ImageDigest': 'string',
'ImageTags': [
'string',
],
'ImagePublishedAt': 'string'
},
'AwsOpenSearchServiceDomain': {
'Arn': 'string',
'AccessPolicies': 'string',
'DomainName': 'string',
'Id': 'string',
'DomainEndpoint': 'string',
'EngineVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string',
'OptionalDeployment': True|False
},
'ClusterConfig': {
'InstanceCount': 123,
'WarmEnabled': True|False,
'WarmCount': 123,
'DedicatedMasterEnabled': True|False,
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'DedicatedMasterCount': 123,
'InstanceType': 'string',
'WarmType': 'string',
'ZoneAwarenessEnabled': True|False,
'DedicatedMasterType': 'string'
},
'DomainEndpointOptions': {
'CustomEndpointCertificateArn': 'string',
'CustomEndpointEnabled': True|False,
'EnforceHTTPS': True|False,
'CustomEndpoint': 'string',
'TLSSecurityPolicy': 'string'
},
'VpcOptions': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'DomainEndpoints': {
'string': 'string'
},
'AdvancedSecurityOptions': {
'Enabled': True|False,
'InternalUserDatabaseEnabled': True|False,
'MasterUserOptions': {
'MasterUserArn': 'string',
'MasterUserName': 'string',
'MasterUserPassword': 'string'
}
}
},
'AwsEc2VpcEndpointService': {
'AcceptanceRequired': True|False,
'AvailabilityZones': [
'string',
],
'BaseEndpointDnsNames': [
'string',
],
'ManagesVpcEndpoints': True|False,
'GatewayLoadBalancerArns': [
'string',
],
'NetworkLoadBalancerArns': [
'string',
],
'PrivateDnsName': 'string',
'ServiceId': 'string',
'ServiceName': 'string',
'ServiceState': 'string',
'ServiceType': [
{
'ServiceType': 'string'
},
]
},
'AwsXrayEncryptionConfig': {
'KeyId': 'string',
'Status': 'string',
'Type': 'string'
},
'AwsWafRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsWafRegionalRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsEcrRepository': {
'Arn': 'string',
'ImageScanningConfiguration': {
'ScanOnPush': True|False
},
'ImageTagMutability': 'string',
'LifecyclePolicy': {
'LifecyclePolicyText': 'string',
'RegistryId': 'string'
},
'RepositoryName': 'string',
'RepositoryPolicyText': 'string'
},
'AwsEksCluster': {
'Arn': 'string',
'CertificateAuthorityData': 'string',
'ClusterStatus': 'string',
'Endpoint': 'string',
'Name': 'string',
'ResourcesVpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'RoleArn': 'string',
'Version': 'string',
'Logging': {
'ClusterLogging': [
{
'Enabled': True|False,
'Types': [
'string',
]
},
]
}
},
'AwsNetworkFirewallFirewallPolicy': {
'FirewallPolicy': {
'StatefulRuleGroupReferences': [
{
'ResourceArn': 'string'
},
],
'StatelessCustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessDefaultActions': [
'string',
],
'StatelessFragmentDefaultActions': [
'string',
],
'StatelessRuleGroupReferences': [
{
'Priority': 123,
'ResourceArn': 'string'
},
]
},
'FirewallPolicyArn': 'string',
'FirewallPolicyId': 'string',
'FirewallPolicyName': 'string',
'Description': 'string'
},
'AwsNetworkFirewallFirewall': {
'DeleteProtection': True|False,
'Description': 'string',
'FirewallArn': 'string',
'FirewallId': 'string',
'FirewallName': 'string',
'FirewallPolicyArn': 'string',
'FirewallPolicyChangeProtection': True|False,
'SubnetChangeProtection': True|False,
'SubnetMappings': [
{
'SubnetId': 'string'
},
],
'VpcId': 'string'
},
'AwsNetworkFirewallRuleGroup': {
'Capacity': 123,
'Description': 'string',
'RuleGroup': {
'RuleVariables': {
'IpSets': {
'Definition': [
'string',
]
},
'PortSets': {
'Definition': [
'string',
]
}
},
'RulesSource': {
'RulesSourceList': {
'GeneratedRulesType': 'string',
'TargetTypes': [
'string',
],
'Targets': [
'string',
]
},
'RulesString': 'string',
'StatefulRules': [
{
'Action': 'string',
'Header': {
'Destination': 'string',
'DestinationPort': 'string',
'Direction': 'string',
'Protocol': 'string',
'Source': 'string',
'SourcePort': 'string'
},
'RuleOptions': [
{
'Keyword': 'string',
'Settings': [
'string',
]
},
]
},
],
'StatelessRulesAndCustomActions': {
'CustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessRules': [
{
'Priority': 123,
'RuleDefinition': {
'Actions': [
'string',
],
'MatchAttributes': {
'DestinationPorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Destinations': [
{
'AddressDefinition': 'string'
},
],
'Protocols': [
123,
],
'SourcePorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Sources': [
{
'AddressDefinition': 'string'
},
],
'TcpFlags': [
{
'Flags': [
'string',
],
'Masks': [
'string',
]
},
]
}
}
},
]
}
}
},
'RuleGroupArn': 'string',
'RuleGroupId': 'string',
'RuleGroupName': 'string',
'Type': 'string'
},
'AwsRdsDbSecurityGroup': {
'DbSecurityGroupArn': 'string',
'DbSecurityGroupDescription': 'string',
'DbSecurityGroupName': 'string',
'Ec2SecurityGroups': [
{
'Ec2SecurityGroupId': 'string',
'Ec2SecurityGroupName': 'string',
'Ec2SecurityGroupOwnerId': 'string',
'Status': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string',
'Status': 'string'
},
],
'OwnerId': 'string',
'VpcId': 'string'
},
'AwsKinesisStream': {
'Name': 'string',
'Arn': 'string',
'StreamEncryption': {
'EncryptionType': 'string',
'KeyId': 'string'
},
'ShardCount': 123,
'RetentionPeriodHours': 123
},
'AwsEc2TransitGateway': {
'Id': 'string',
'Description': 'string',
'DefaultRouteTablePropagation': 'string',
'AutoAcceptSharedAttachments': 'string',
'DefaultRouteTableAssociation': 'string',
'TransitGatewayCidrBlocks': [
'string',
],
'AssociationDefaultRouteTableId': 'string',
'PropagationDefaultRouteTableId': 'string',
'VpnEcmpSupport': 'string',
'DnsSupport': 'string',
'MulticastSupport': 'string',
'AmazonSideAsn': 123
},
'AwsEfsAccessPoint': {
'AccessPointId': 'string',
'Arn': 'string',
'ClientToken': 'string',
'FileSystemId': 'string',
'PosixUser': {
'Gid': 'string',
'SecondaryGids': [
'string',
],
'Uid': 'string'
},
'RootDirectory': {
'CreationInfo': {
'OwnerGid': 'string',
'OwnerUid': 'string',
'Permissions': 'string'
},
'Path': 'string'
}
},
'AwsCloudFormationStack': {
'Capabilities': [
'string',
],
'CreationTime': 'string',
'Description': 'string',
'DisableRollback': True|False,
'DriftInformation': {
'StackDriftStatus': 'string'
},
'EnableTerminationProtection': True|False,
'LastUpdatedTime': 'string',
'NotificationArns': [
'string',
],
'Outputs': [
{
'Description': 'string',
'OutputKey': 'string',
'OutputValue': 'string'
},
],
'RoleArn': 'string',
'StackId': 'string',
'StackName': 'string',
'StackStatus': 'string',
'StackStatusReason': 'string',
'TimeoutInMinutes': 123
},
'AwsCloudWatchAlarm': {
'ActionsEnabled': True|False,
'AlarmActions': [
'string',
],
'AlarmArn': 'string',
'AlarmConfigurationUpdatedTimestamp': 'string',
'AlarmDescription': 'string',
'AlarmName': 'string',
'ComparisonOperator': 'string',
'DatapointsToAlarm': 123,
'Dimensions': [
{
'Name': 'string',
'Value': 'string'
},
],
'EvaluateLowSampleCountPercentile': 'string',
'EvaluationPeriods': 123,
'ExtendedStatistic': 'string',
'InsufficientDataActions': [
'string',
],
'MetricName': 'string',
'Namespace': 'string',
'OkActions': [
'string',
],
'Period': 123,
'Statistic': 'string',
'Threshold': 123.0,
'ThresholdMetricId': 'string',
'TreatMissingData': 'string',
'Unit': 'string'
},
'AwsEc2VpcPeeringConnection': {
'AccepterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'ExpirationTime': 'string',
'RequesterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'Status': {
'Code': 'string',
'Message': 'string'
},
'VpcPeeringConnectionId': 'string'
},
'AwsWafRegionalRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsWafRegionalRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRegionalWebAcl': {
'DefaultAction': 'string',
'MetricName': 'string',
'Name': 'string',
'RulesList': [
{
'Action': {
'Type': 'string'
},
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsWafRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsEcsTask': {
'ClusterArn': 'string',
'TaskDefinitionArn': 'string',
'Version': 'string',
'CreatedAt': 'string',
'StartedAt': 'string',
'StartedBy': 'string',
'Group': 'string',
'Volumes': [
{
'Name': 'string',
'Host': {
'SourcePath': 'string'
}
},
],
'Containers': [
{
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
]
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string',
'PackageManager': 'string',
'FilePath': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string',
'Source': 'string',
'Adjustments': [
{
'Metric': 'string',
'Reason': 'string'
},
]
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
],
'PatchSummary': {
'Id': 'string',
'InstalledCount': 123,
'MissingCount': 123,
'FailedCount': 123,
'InstalledOtherCount': 123,
'InstalledRejectedCount': 123,
'InstalledPendingReboot': 123,
'OperationStartTime': 'string',
'OperationEndTime': 'string',
'RebootOption': 'string',
'Operation': 'string'
},
'Action': {
'ActionType': 'string',
'NetworkConnectionAction': {
'ConnectionDirection': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'RemotePortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'Protocol': 'string',
'Blocked': True|False
},
'AwsApiCallAction': {
'Api': 'string',
'ServiceName': 'string',
'CallerType': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'DomainDetails': {
'Domain': 'string'
},
'AffectedResources': {
'string': 'string'
},
'FirstSeen': 'string',
'LastSeen': 'string'
},
'DnsRequestAction': {
'Domain': 'string',
'Protocol': 'string',
'Blocked': True|False
},
'PortProbeAction': {
'PortProbeDetails': [
{
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalIpDetails': {
'IpAddressV4': 'string'
},
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
}
},
],
'Blocked': True|False
}
},
'FindingProviderFields': {
'Confidence': 123,
'Criticality': 123,
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Severity': {
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Original': 'string'
},
'Types': [
'string',
]
},
'Sample': True|False
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Findings (list) --
The findings that matched the filters specified in the request.
(dict) --
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between Amazon Web Services security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by Amazon Web Services services or by the integrated third-party solutions and standards checks.
SchemaVersion (string) --
The schema version that a finding is formatted for.
Id (string) --
The security findings provider-specific identifier for a finding.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
ProductName (string) --
The name of the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by product name, you use this attribute.
CompanyName (string) --
The name of the company for the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by company name, you use this attribute.
Region (string) --
The Region from which the finding was generated.
Security Hub populates this attribute automatically for each finding. You cannot update it using BatchImportFindings or BatchUpdateFindings .
GeneratorId (string) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
AwsAccountId (string) --
The Amazon Web Services account ID that a finding is generated in.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
FirstObservedAt (string) --
Indicates when the security-findings provider first observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastObservedAt (string) --
Indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
CreatedAt (string) --
Indicates when the security-findings provider created the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
UpdatedAt (string) --
Indicates when the security-findings provider last updated the finding record.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Severity (dict) --
A finding's severity.
Product (float) --
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the Amazon Web Services service or integrated partner product that generated the finding.
Label (string) --
The severity value of the finding. The allowed values are the following.
INFORMATIONAL - No issue was found.LOW - The issue does not require action on its own.MEDIUM - The issue must be addressed but not urgently.HIGH - The issue must be addressed as a priority.CRITICAL - The issue must be remediated immediately to avoid it escalating.If you provide Normalized and do not provide Label , then Label is set automatically as follows.
INFORMATIONALLOWMEDIUMHIGHCRITICALNormalized (integer) --
Deprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
INFORMATIONAL - 0LOW - 1MEDIUM - 40HIGH - 70CRITICAL - 90Original (string) --
The native severity from the finding product that generated the finding.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
Title (string) --
A finding's title.
Note
In this release, Title is a required property.
Description (string) --
A finding's description.
Note
In this release, Description is a required property.
Remediation (dict) --
A data type that describes the remediation options for a finding.
Recommendation (dict) --
A recommendation on the steps to take to remediate the issue identified by a finding.
Text (string) --
Describes the recommended steps to take to remediate an issue identified in a finding.
Url (string) --
A URL to a page or site that contains information about how to remediate a finding.
SourceUrl (string) --
A URL that links to a page about the current finding in the security-findings provider's solution.
ProductFields (dict) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
Can contain up to 50 key-value pairs. For each key-value pair, the key can contain up to 128 characters, and the value can contain up to 2048 characters.
UserDefinedFields (dict) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Malware (list) --
A list of malware related to a finding.
(dict) --
A list of malware related to a finding.
Name (string) --
The name of the malware that was observed.
Type (string) --
The type of the malware that was observed.
Path (string) --
The file system path of the malware that was observed.
State (string) --
The state of the malware that was observed.
Network (dict) --
The details of network-related information about a finding.
Direction (string) --
The direction of network traffic associated with a finding.
Protocol (string) --
The protocol of network-related information about a finding.
OpenPortRange (dict) --
The range of open ports that is present on the network.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
SourceIpV4 (string) --
The source IPv4 address of network-related information about a finding.
SourceIpV6 (string) --
The source IPv6 address of network-related information about a finding.
SourcePort (integer) --
The source port of network-related information about a finding.
SourceDomain (string) --
The source domain of network-related information about a finding.
SourceMac (string) --
The source media access control (MAC) address of network-related information about a finding.
DestinationIpV4 (string) --
The destination IPv4 address of network-related information about a finding.
DestinationIpV6 (string) --
The destination IPv6 address of network-related information about a finding.
DestinationPort (integer) --
The destination port of network-related information about a finding.
DestinationDomain (string) --
The destination domain of network-related information about a finding.
NetworkPath (list) --
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
(dict) --
Information about a network path component.
ComponentId (string) --
The identifier of a component in the network path.
ComponentType (string) --
The type of component.
Egress (dict) --
Information about the component that comes after the current component in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Ingress (dict) --
Information about the component that comes before the current node in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Process (dict) --
The details of process-related information about a finding.
Name (string) --
The name of the process.
Path (string) --
The path to the process executable.
Pid (integer) --
The process ID.
ParentPid (integer) --
The parent process ID.
LaunchedAt (string) --
Indicates when the process was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
TerminatedAt (string) --
Indicates when the process was terminated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Threats (list) --
Details about the threat detected in a security finding and the file paths that were affected by the threat.
(dict) --
Provides information about the threat detected in a security finding and the file paths that were affected by the threat.
Name (string) --
The name of the threat.
Severity (string) --
The severity of the threat.
ItemCount (integer) --
This total number of items in which the threat has been detected.
FilePaths (list) --
Provides information about the file paths that were affected by the threat.
(dict) --
Provides information about the file paths that were affected by the threat.
FilePath (string) --
Path to the infected or suspicious file on the resource it was detected on.
FileName (string) --
The name of the infected or suspicious file corresponding to the hash.
ResourceId (string) --
The Amazon Resource Name (ARN) of the resource on which the threat was detected.
Hash (string) --
The hash value for the infected or suspicious file.
ThreatIntelIndicators (list) --
Threat intelligence details related to a finding.
(dict) --
Details about the threat intelligence related to a finding.
Type (string) --
The type of threat intelligence indicator.
Value (string) --
The value of a threat intelligence indicator.
Category (string) --
The category of a threat intelligence indicator.
LastObservedAt (string) --
Indicates when the most recent instance of a threat intelligence indicator was observed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Source (string) --
The source of the threat intelligence indicator.
SourceUrl (string) --
The URL to the page or site where you can get more information about the threat intelligence indicator.
Resources (list) --
A set of resource data types that describe the resources that the finding refers to.
(dict) --
A resource related to a finding.
Type (string) --
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
Id (string) --
The canonical identifier for the given resource type.
Partition (string) --
The canonical Amazon Web Services partition name that the Region is assigned to.
Region (string) --
The canonical Amazon Web Services external Region name where this resource is located.
ResourceRole (string) --
Identifies the role of the resource in the finding. A resource is either the actor or target of the finding activity,
Tags (dict) --
A list of Amazon Web Services tags associated with a resource at the time the finding was processed.
DataClassification (dict) --
Contains information about sensitive data that was detected on the resource.
DetailedResultsLocation (string) --
The path to the folder or file that contains the sensitive data.
Result (dict) --
The details about the sensitive data that was detected on the resource.
MimeType (string) --
The type of content that the finding applies to.
SizeClassified (integer) --
The total size in bytes of the affected data.
AdditionalOccurrences (boolean) --
Indicates whether there are additional occurrences of sensitive data that are not included in the finding. This occurs when the number of occurrences exceeds the maximum that can be included.
Status (dict) --
The current status of the sensitive data detection.
Code (string) --
The code that represents the status of the sensitive data detection.
Reason (string) --
A longer description of the current status of the sensitive data detection.
SensitiveData (list) --
Provides details about sensitive data that was identified based on built-in configuration.
(dict) --
Contains a detected instance of sensitive data that are based on built-in identifiers.
Category (string) --
The category of sensitive data that was detected. For example, the category can indicate that the sensitive data involved credentials, financial information, or personal information.
Detections (list) --
The list of detected instances of sensitive data.
(dict) --
The list of detected instances of sensitive data.
Count (integer) --
The total number of occurrences of sensitive data that were detected.
Type (string) --
The type of sensitive data that was detected. For example, the type might indicate that the data is an email address.
Occurrences (dict) --
Details about the sensitive data that was detected.
LineRanges (list) --
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRanges (list) --
Occurrences of sensitive data detected in a binary text file.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Pages (list) --
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
(dict) --
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
PageNumber (integer) --
The page number of the page that contains the sensitive data.
LineRange (dict) --
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRange (dict) --
An occurrence of sensitive data detected in a binary text file.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Records (list) --
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
(dict) --
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
JsonPath (string) --
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
RecordIndex (integer) --
The record index, starting from 0, for the record that contains the data.
Cells (list) --
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
(dict) --
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
Column (integer) --
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
Row (integer) --
The row number of the row that contains the data.
ColumnName (string) --
The name of the column that contains the data.
CellReference (string) --
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
TotalCount (integer) --
The total number of occurrences of sensitive data.
CustomDataIdentifiers (dict) --
Provides details about sensitive data that was identified based on customer-defined configuration.
Detections (list) --
The list of detected instances of sensitive data.
(dict) --
The list of detected instances of sensitive data.
Count (integer) --
The total number of occurrences of sensitive data that were detected.
Arn (string) --
The ARN of the custom identifier that was used to detect the sensitive data.
Name (string) --
he name of the custom identifier that detected the sensitive data.
Occurrences (dict) --
Details about the sensitive data that was detected.
LineRanges (list) --
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRanges (list) --
Occurrences of sensitive data detected in a binary text file.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Pages (list) --
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
(dict) --
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
PageNumber (integer) --
The page number of the page that contains the sensitive data.
LineRange (dict) --
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRange (dict) --
An occurrence of sensitive data detected in a binary text file.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Records (list) --
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
(dict) --
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
JsonPath (string) --
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
RecordIndex (integer) --
The record index, starting from 0, for the record that contains the data.
Cells (list) --
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
(dict) --
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
Column (integer) --
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
Row (integer) --
The row number of the row that contains the data.
ColumnName (string) --
The name of the column that contains the data.
CellReference (string) --
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
TotalCount (integer) --
The total number of occurrences of sensitive data.
Details (dict) --
Additional details about the resource related to a finding.
AwsAutoScalingAutoScalingGroup (dict) --
Details for an autoscaling group.
LaunchConfigurationName (string) --
The name of the launch configuration.
LoadBalancerNames (list) --
The list of load balancers associated with the group.
HealthCheckType (string) --
The service to use for the health checks.
HealthCheckGracePeriod (integer) --
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
CreatedTime (string) --
Indicates when the auto scaling group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
MixedInstancesPolicy (dict) --
The mixed instances policy for the automatic scaling group.
InstancesDistribution (dict) --
The instances distribution. The instances distribution specifies the distribution of On-Demand Instances and Spot Instances, the maximum price to pay for Spot Instances, and how the Auto Scaling group allocates instance types to fulfill On-Demand and Spot capacity.
OnDemandAllocationStrategy (string) --
How to allocate instance types to fulfill On-Demand capacity.
OnDemandBaseCapacity (integer) --
The minimum amount of the Auto Scaling group's capacity that must be fulfilled by On-Demand Instances.
OnDemandPercentageAboveBaseCapacity (integer) --
The percentage of On-Demand Instances and Spot Instances for additional capacity beyond OnDemandBaseCapacity .
SpotAllocationStrategy (string) --
How to allocate instances across Spot Instance pools.
SpotInstancePools (integer) --
The number of Spot Instance pools across which to allocate your Spot Instances.
SpotMaxPrice (string) --
The maximum price per unit hour that you are willing to pay for a Spot Instance.
LaunchTemplate (dict) --
The launch template to use and the instance types (overrides) to use to provision EC2 instances to fulfill On-Demand and Spot capacities.
LaunchTemplateSpecification (dict) --
The launch template to use for a mixed instances policy.
LaunchTemplateId (string) --
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
LaunchTemplateName (string) --
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Version (string) --
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
Overrides (list) --
Property values to use to override the values in the launch template.
(dict) --
Property values to use to override the values in the launch template.
InstanceType (string) --
The instance type. For example, m3.xlarge .
WeightedCapacity (string) --
The number of capacity units provided by the specified instance type in terms of virtual CPUs, memory, storage, throughput, or other relative performance characteristic.
AvailabilityZones (list) --
The list of Availability Zones for the automatic scaling group.
(dict) --
An Availability Zone for the automatic scaling group.
Value (string) --
The name of the Availability Zone.
LaunchTemplate (dict) --
The launch template to use.
LaunchTemplateId (string) --
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
LaunchTemplateName (string) --
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Version (string) --
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
CapacityRebalance (boolean) --
Indicates whether capacity rebalancing is enabled.
AwsCodeBuildProject (dict) --
Details for an CodeBuild project.
EncryptionKey (string) --
The KMS key used to encrypt the build output artifacts.
You can specify either the ARN of the KMS key or, if available, the KMS key alias (using the format alias/alias-name).
Artifacts (list) --
Information about the build artifacts for the CodeBuild project.
(dict) --
Information about the build artifacts for the CodeBuild project.
ArtifactIdentifier (string) --
An identifier for the artifact definition.
EncryptionDisabled (boolean) --
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Location (string) --
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Name (string) --
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
NamespaceType (string) --
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
OverrideArtifactName (boolean) --
Whether the name specified in the buildspec file overrides the artifact name.
Packaging (string) --
Only used when Type is S3 . The type of output artifact to create.
Path (string) --
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
Type (string) --
The type of build artifact.
Environment (dict) --
Information about the build environment for this build project.
Certificate (string) --
The certificate to use with this build project.
EnvironmentVariables (list) --
A set of environment variables to make available to builds for the build project.
(dict) --
Information about an environment variable that is available to builds for the build project.
Name (string) --
The name of the environment variable.
Type (string) --
The type of environment variable.
Value (string) --
The value of the environment variable.
PrivilegedMode (boolean) --
Whether to allow the Docker daemon to run inside a Docker container. Set to true if the build project is used to build Docker images.
ImagePullCredentialsType (string) --
The type of credentials CodeBuild uses to pull images in your build.
Valid values:
CODEBUILD specifies that CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust the CodeBuild service principal.SERVICE_ROLE specifies that CodeBuild uses your build project's service role.When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an CodeBuild curated image, you must use CODEBUILD credentials.
RegistryCredential (dict) --
The credentials for access to a private registry.
Credential (string) --
The ARN or name of credentials created using Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current Amazon Web Services Region.
CredentialProvider (string) --
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for Secrets Manager.
Type (string) --
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
Name (string) --
The name of the build project.
Source (dict) --
Information about the build input source code for this build project.
Type (string) --
The type of repository that contains the source code to be built. Valid values are:
BITBUCKET - The source code is in a Bitbucket repository.CODECOMMIT - The source code is in an CodeCommit repository.CODEPIPELINE - The source code settings are specified in the source action of a pipeline in CodePipeline.GITHUB - The source code is in a GitHub repository.GITHUB_ENTERPRISE - The source code is in a GitHub Enterprise repository.NO_SOURCE - The project does not have input source code.S3 - The source code is in an S3 input bucket.Location (string) --
Information about the location of the source code to be built.
Valid values include:
https://git-codecommit.region-ID.amazonaws.com/v1/repos/repo-name ).bucket-name/path/to/object-name.zip ).bucket-name/path/to/source-code/folder/ ).GitCloneDepth (integer) --
Information about the Git clone depth for the build project.
InsecureSsl (boolean) --
Whether to ignore SSL warnings while connecting to the project source code.
ServiceRole (string) --
The ARN of the IAM role that enables CodeBuild to interact with dependent Amazon Web Services services on behalf of the Amazon Web Services account.
LogsConfig (dict) --
Information about logs for the build project.
CloudWatchLogs (dict) --
Information about CloudWatch Logs for the build project.
GroupName (string) --
The group name of the logs in CloudWatch Logs.
Status (string) --
The current status of the logs in CloudWatch Logs for a build project.
StreamName (string) --
The prefix of the stream name of the CloudWatch Logs.
S3Logs (dict) --
Information about logs built to an S3 bucket for a build project.
EncryptionDisabled (boolean) --
Whether to disable encryption of the S3 build log output.
Location (string) --
The ARN of the S3 bucket and the path prefix for S3 logs.
Status (string) --
The current status of the S3 build logs.
VpcConfig (dict) --
Information about the VPC configuration that CodeBuild accesses.
VpcId (string) --
The ID of the VPC.
Subnets (list) --
A list of one or more subnet IDs in your VPC.
SecurityGroupIds (list) --
A list of one or more security group IDs in your VPC.
SecondaryArtifacts (list) --
Information about the secondary artifacts for the CodeBuild project.
(dict) --
Information about the build artifacts for the CodeBuild project.
ArtifactIdentifier (string) --
An identifier for the artifact definition.
EncryptionDisabled (boolean) --
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Location (string) --
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Name (string) --
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
NamespaceType (string) --
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
OverrideArtifactName (boolean) --
Whether the name specified in the buildspec file overrides the artifact name.
Packaging (string) --
Only used when Type is S3 . The type of output artifact to create.
Path (string) --
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
Type (string) --
The type of build artifact.
AwsCloudFrontDistribution (dict) --
Details about a CloudFront distribution.
CacheBehaviors (dict) --
Provides information about the cache configuration for the distribution.
Items (list) --
The cache behaviors for the distribution.
(dict) --
Information about a cache behavior for the distribution.
ViewerProtocolPolicy (string) --
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).DefaultCacheBehavior (dict) --
The default cache behavior for the configuration.
ViewerProtocolPolicy (string) --
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).DefaultRootObject (string) --
The object that CloudFront sends in response to requests from the origin (for example, index.html) when a viewer requests the root URL for the distribution (http://www.example.com) instead of an object in your distribution (http://www.example.com/product-description.html).
DomainName (string) --
The domain name corresponding to the distribution.
ETag (string) --
The entity tag is a hash of the object.
LastModifiedTime (string) --
Indicates when that the distribution was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Logging (dict) --
A complex type that controls whether access logs are written for the distribution.
Bucket (string) --
The S3 bucket to store the access logs in.
Enabled (boolean) --
With this field, you can enable or disable the selected distribution.
IncludeCookies (boolean) --
Specifies whether you want CloudFront to include cookies in access logs.
Prefix (string) --
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
Origins (dict) --
A complex type that contains information about origins for this distribution.
Items (list) --
A complex type that contains origins or origin groups for this distribution.
(dict) --
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), AWS Elemental MediaStore, or other server from which CloudFront gets your files.
DomainName (string) --
Amazon S3 origins: The DNS name of the S3 bucket from which you want CloudFront to get objects for this origin.
Id (string) --
A unique identifier for the origin or origin group.
OriginPath (string) --
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
S3OriginConfig (dict) --
An origin that is an S3 bucket that is not configured with static website hosting.
OriginAccessIdentity (string) --
The CloudFront origin access identity to associate with the origin.
CustomOriginConfig (dict) --
An origin that is not an Amazon S3 bucket, with one exception. If the Amazon S3 bucket is configured with static website hosting, use this attribute. If the Amazon S3 bucket is not configured with static website hosting, use the S3OriginConfig type instead.
HttpPort (integer) --
The HTTP port that CloudFront uses to connect to the origin.
HttpsPort (integer) --
The HTTPS port that CloudFront uses to connect to the origin.
OriginKeepaliveTimeout (integer) --
Specifies how long, in seconds, CloudFront persists its connection to the origin.
OriginProtocolPolicy (string) --
Specifies the protocol (HTTP or HTTPS) that CloudFront uses to connect to the origin.
OriginReadTimeout (integer) --
Specifies how long, in seconds, CloudFront waits for a response from the origin.
OriginSslProtocols (dict) --
Specifies the minimum SSL/TLS protocol that CloudFront uses when connecting to your origin over HTTPS.
Items (list) --
A list that contains allowed SSL/TLS protocols for this distribution.
Quantity (integer) --
The number of SSL/TLS protocols that you want to allow CloudFront to use when establishing an HTTPS connection with this origin.
OriginGroups (dict) --
Provides information about the origin groups in the distribution.
Items (list) --
The list of origin groups.
(dict) --
Information about an origin group for the CloudFront distribution.
FailoverCriteria (dict) --
Provides the criteria for an origin group to fail over.
StatusCodes (dict) --
Information about the status codes that cause an origin group to fail over.
Items (list) --
The list of status code values that can cause a failover to the next origin.
Quantity (integer) --
The number of status codes that can cause a failover.
ViewerCertificate (dict) --
Provides information about the TLS/SSL configuration that the distribution uses to communicate with viewers.
AcmCertificateArn (string) --
The ARN of the ACM certificate. Used if the certificate is stored in ACM. If you provide an ACM certificate ARN, you must also provide MinimumCertificateVersion and SslSupportMethod .
Certificate (string) --
The identifier of the certificate. Note that in CloudFront, this attribute is deprecated.
CertificateSource (string) --
The source of the certificate identified by Certificate . Note that in CloudFront, this attribute is deprecated.
CloudFrontDefaultCertificate (boolean) --
Whether the distribution uses the CloudFront domain name. If set to false , then you provide either AcmCertificateArn or IamCertificateId .
IamCertificateId (string) --
The identifier of the IAM certificate. Used if the certificate is stored in IAM. If you provide IamCertificateId , then you also must provide MinimumProtocolVersion and SslSupportMethod .
MinimumProtocolVersion (string) --
The security policy that CloudFront uses for HTTPS connections with viewers. If SslSupportMethod is sni-only , then MinimumProtocolVersion must be TLSv1 or higher.
SslSupportMethod (string) --
The viewers that the distribution accepts HTTPS connections from.
Status (string) --
Indicates the current status of the distribution.
WebAclId (string) --
A unique identifier that specifies the WAF web ACL, if any, to associate with this distribution.
AwsEc2Instance (dict) --
Details about an EC2 instance related to a finding.
Type (string) --
The instance type of the instance.
ImageId (string) --
The Amazon Machine Image (AMI) ID of the instance.
IpV4Addresses (list) --
The IPv4 addresses associated with the instance.
IpV6Addresses (list) --
The IPv6 addresses associated with the instance.
KeyName (string) --
The key name associated with the instance.
IamInstanceProfileArn (string) --
The IAM profile ARN of the instance.
VpcId (string) --
The identifier of the VPC that the instance was launched in.
SubnetId (string) --
The identifier of the subnet that the instance was launched in.
LaunchedAt (string) --
Indicates when the instance was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NetworkInterfaces (list) --
The identifiers of the network interfaces for the EC2 instance. The details for each network interface are in a corresponding AwsEc2NetworkInterfacesDetails object.
(dict) --
Identifies a network interface for the Amazon EC2 instance.
NetworkInterfaceId (string) --
The identifier of the network interface. The details are in a corresponding AwsEc2NetworkInterfacesDetails object.
VirtualizationType (string) --
The virtualization type of the Amazon Machine Image (AMI) required to launch the instance.
MetadataOptions (dict) --
Details about the metadata options for the Amazon EC2 instance.
HttpEndpoint (string) --
Enables or disables the HTTP metadata endpoint on the instance.
HttpProtocolIpv6 (string) --
Enables or disables the IPv6 endpoint for the instance metadata service.
HttpPutResponseHopLimit (integer) --
The desired HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
HttpTokens (string) --
The state of token usage for your instance metadata requests.
InstanceMetadataTags (string) --
Specifies whether to allow access to instance tags from the instance metadata.
AwsEc2NetworkInterface (dict) --
Details for an EC2 network interface.
Attachment (dict) --
The network interface attachment.
AttachTime (string) --
Indicates when the attachment initiated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AttachmentId (string) --
The identifier of the network interface attachment
DeleteOnTermination (boolean) --
Indicates whether the network interface is deleted when the instance is terminated.
DeviceIndex (integer) --
The device index of the network interface attachment on the instance.
InstanceId (string) --
The ID of the instance.
InstanceOwnerId (string) --
The Amazon Web Services account ID of the owner of the instance.
Status (string) --
The attachment state.
Valid values: attaching | attached | detaching | detached
NetworkInterfaceId (string) --
The ID of the network interface.
SecurityGroups (list) --
Security groups for the network interface.
(dict) --
A security group associated with the network interface.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
SourceDestCheck (boolean) --
Indicates whether traffic to or from the instance is validated.
IpV6Addresses (list) --
The IPv6 addresses associated with the network interface.
(dict) --
Provides information about an IPV6 address that is associated with the network interface.
IpV6Address (string) --
The IPV6 address.
PrivateIpAddresses (list) --
The private IPv4 addresses associated with the network interface.
(dict) --
Provides information about a private IPv4 address that is with the network interface.
PrivateIpAddress (string) --
The IP address.
PrivateDnsName (string) --
The private DNS name for the IP address.
PublicDnsName (string) --
The public DNS name of the network interface.
PublicIp (string) --
The address of the Elastic IP address bound to the network interface.
AwsEc2SecurityGroup (dict) --
Details for an EC2 security group.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
OwnerId (string) --
The Amazon Web Services account ID of the owner of the security group.
VpcId (string) --
[VPC only] The ID of the VPC for the security group.
IpPermissions (list) --
The inbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and Amazon Web Services account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
IpPermissionsEgress (list) --
[VPC only] The outbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and Amazon Web Services account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
AwsEc2Volume (dict) --
Details for an Amazon EC2 volume.
CreateTime (string) --
Indicates when the volume was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DeviceName (string) --
The device name for the volume that is attached to the instance.
Encrypted (boolean) --
Specifies whether the volume is encrypted.
Size (integer) --
The size of the volume, in GiBs.
SnapshotId (string) --
The snapshot from which the volume was created.
Status (string) --
The volume state.
KmsKeyId (string) --
The ARN of the KMS key that was used to protect the volume encryption key for the volume.
Attachments (list) --
The volume attachments.
(dict) --
An attachment to an Amazon EC2 volume.
AttachTime (string) --
The datetime when the attachment initiated.
DeleteOnTermination (boolean) --
Whether the EBS volume is deleted when the EC2 instance is terminated.
InstanceId (string) --
The identifier of the EC2 instance.
Status (string) --
The attachment state of the volume.
VolumeId (string) --
The ID of the volume.
VolumeType (string) --
The volume type.
VolumeScanStatus (string) --
Indicates whether the volume was scanned or skipped.
AwsEc2Vpc (dict) --
Details for an Amazon EC2 VPC.
CidrBlockAssociationSet (list) --
Information about the IPv4 CIDR blocks associated with the VPC.
(dict) --
An IPv4 CIDR block association.
AssociationId (string) --
The association ID for the IPv4 CIDR block.
CidrBlock (string) --
The IPv4 CIDR block.
CidrBlockState (string) --
Information about the state of the IPv4 CIDR block.
Ipv6CidrBlockAssociationSet (list) --
Information about the IPv6 CIDR blocks associated with the VPC.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
DhcpOptionsId (string) --
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
State (string) --
The current state of the VPC.
AwsEc2Eip (dict) --
Details about an Elastic IP address.
InstanceId (string) --
The identifier of the EC2 instance.
PublicIp (string) --
A public IP address that is associated with the EC2 instance.
AllocationId (string) --
The identifier that Amazon Web Services assigns to represent the allocation of the Elastic IP address for use with Amazon VPC.
AssociationId (string) --
The identifier that represents the association of the Elastic IP address with an EC2 instance.
Domain (string) --
The domain in which to allocate the address.
If the address is for use with EC2 instances in a VPC, then Domain is vpc . Otherwise, Domain is standard .
PublicIpv4Pool (string) --
The identifier of an IP address pool. This parameter allows Amazon EC2 to select an IP address from the address pool.
NetworkBorderGroup (string) --
The name of the location from which the Elastic IP address is advertised.
NetworkInterfaceId (string) --
The identifier of the network interface.
NetworkInterfaceOwnerId (string) --
The Amazon Web Services account ID of the owner of the network interface.
PrivateIpAddress (string) --
The private IP address that is associated with the Elastic IP address.
AwsEc2Subnet (dict) --
Details about a subnet in Amazon EC2.
AssignIpv6AddressOnCreation (boolean) --
Whether to assign an IPV6 address to a network interface that is created in this subnet.
AvailabilityZone (string) --
The Availability Zone for the subnet.
AvailabilityZoneId (string) --
The identifier of the Availability Zone for the subnet.
AvailableIpAddressCount (integer) --
The number of available IPV4 addresses in the subnet. Does not include addresses for stopped instances.
CidrBlock (string) --
The IPV4 CIDR block that is assigned to the subnet.
DefaultForAz (boolean) --
Whether this subnet is the default subnet for the Availability Zone.
MapPublicIpOnLaunch (boolean) --
Whether instances in this subnet receive a public IP address.
OwnerId (string) --
The identifier of the Amazon Web Services account that owns the subnet.
State (string) --
The current state of the subnet.
SubnetArn (string) --
The ARN of the subnet.
SubnetId (string) --
The identifier of the subnet.
VpcId (string) --
The identifier of the VPC that contains the subnet.
Ipv6CidrBlockAssociationSet (list) --
The IPV6 CIDR blocks that are associated with the subnet.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
AwsEc2NetworkAcl (dict) --
Details about an EC2 network access control list (ACL).
IsDefault (boolean) --
Whether this is the default network ACL for the VPC.
NetworkAclId (string) --
The identifier of the network ACL.
OwnerId (string) --
The identifier of the Amazon Web Services account that owns the network ACL.
VpcId (string) --
The identifier of the VPC for the network ACL.
Associations (list) --
Associations between the network ACL and subnets.
(dict) --
An association between the network ACL and a subnet.
NetworkAclAssociationId (string) --
The identifier of the association between the network ACL and the subnet.
NetworkAclId (string) --
The identifier of the network ACL.
SubnetId (string) --
The identifier of the subnet that is associated with the network ACL.
Entries (list) --
The set of rules in the network ACL.
(dict) --
A rule for the network ACL. Each rule allows or denies access based on the IP address, traffic direction, port, and protocol.
CidrBlock (string) --
The IPV4 network range for which to deny or allow access.
Egress (boolean) --
Whether the rule is an egress rule. An egress rule is a rule that applies to traffic that leaves the subnet.
IcmpTypeCode (dict) --
The Internet Control Message Protocol (ICMP) type and code for which to deny or allow access.
Code (integer) --
The ICMP code for which to deny or allow access. To deny or allow all codes, use the value -1 .
Type (integer) --
The ICMP type for which to deny or allow access. To deny or allow all types, use the value -1 .
Ipv6CidrBlock (string) --
The IPV6 network range for which to deny or allow access.
PortRange (dict) --
For TCP or UDP protocols, the range of ports that the rule applies to.
From (integer) --
The first port in the port range.
To (integer) --
The last port in the port range.
Protocol (string) --
The protocol that the rule applies to. To deny or allow access to all protocols, use the value -1 .
RuleAction (string) --
Whether the rule is used to allow access or deny access.
RuleNumber (integer) --
The rule number. The rules are processed in order by their number.
AwsElbv2LoadBalancer (dict) --
Details about a load balancer.
AvailabilityZones (list) --
The Availability Zones for the load balancer.
(dict) --
Information about an Availability Zone.
ZoneName (string) --
The name of the Availability Zone.
SubnetId (string) --
The ID of the subnet. You can specify one subnet per Availability Zone.
CanonicalHostedZoneId (string) --
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
CreatedTime (string) --
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DNSName (string) --
The public DNS name of the load balancer.
IpAddressType (string) --
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
Scheme (string) --
The nodes of an Internet-facing load balancer have public IP addresses.
SecurityGroups (list) --
The IDs of the security groups for the load balancer.
State (dict) --
The state of the load balancer.
Code (string) --
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
Reason (string) --
A description of the state.
Type (string) --
The type of load balancer.
VpcId (string) --
The ID of the VPC for the load balancer.
LoadBalancerAttributes (list) --
Attributes of the load balancer.
(dict) --
A load balancer attribute.
Key (string) --
The name of the load balancer attribute.
Value (string) --
The value of the load balancer attribute.
AwsElasticBeanstalkEnvironment (dict) --
Details about an Elastic Beanstalk environment.
ApplicationName (string) --
The name of the application that is associated with the environment.
Cname (string) --
The URL to the CNAME for this environment.
DateCreated (string) --
The creation date for this environment.
DateUpdated (string) --
The date when this environment was last modified.
Description (string) --
A description of the environment.
EndpointUrl (string) --
For load-balanced, autoscaling environments, the URL to the load balancer. For single-instance environments, the IP address of the instance.
EnvironmentArn (string) --
The ARN of the environment.
EnvironmentId (string) --
The identifier of the environment.
EnvironmentLinks (list) --
Links to other environments in the same group.
(dict) --
Contains information about a link to another environment that is in the same group.
EnvironmentName (string) --
The name of the linked environment.
LinkName (string) --
The name of the environment link.
EnvironmentName (string) --
The name of the environment.
OptionSettings (list) --
The configuration setting for the environment.
(dict) --
A configuration option setting for the environment.
Namespace (string) --
The type of resource that the configuration option is associated with.
OptionName (string) --
The name of the option.
ResourceName (string) --
The name of the resource.
Value (string) --
The value of the configuration setting.
PlatformArn (string) --
The ARN of the platform version for the environment.
SolutionStackName (string) --
The name of the solution stack that is deployed with the environment.
Status (string) --
The current operational status of the environment.
Tier (dict) --
The tier of the environment.
Name (string) --
The name of the environment tier.
Type (string) --
The type of environment tier.
Version (string) --
The version of the environment tier.
VersionLabel (string) --
The application version of the environment.
AwsElasticsearchDomain (dict) --
Details for an Elasticsearch domain.
AccessPolicies (string) --
IAM policy document specifying the access policies for the new Elasticsearch domain.
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
Valid values:
Policy-Min-TLS-1-0-2019-07 , which supports TLSv1.0 and higherPolicy-Min-TLS-1-2-2019-07 , which only supports TLSv1.2DomainId (string) --
Unique identifier for an Elasticsearch domain.
DomainName (string) --
Name of an Elasticsearch domain.
Domain names are unique across all domains owned by the same account within an Amazon Web Services Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Endpoint (string) --
Domain-specific endpoint used to submit index, search, and data upload requests to an Elasticsearch domain.
The endpoint is a service URL.
Endpoints (dict) --
The key-value pair that exists if the Elasticsearch domain uses VPC endpoints.
ElasticsearchVersion (string) --
OpenSearch version.
ElasticsearchClusterConfig (dict) --
Information about an OpenSearch cluster configuration.
DedicatedMasterCount (integer) --
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
DedicatedMasterEnabled (boolean) --
Whether to use a dedicated master node for the Elasticsearch domain. A dedicated master node performs cluster management tasks, but doesn't hold data or respond to data upload requests.
DedicatedMasterType (string) --
The hardware configuration of the computer that hosts the dedicated master node. For example, m3.medium.elasticsearch . If this attribute is specified, then DedicatedMasterEnabled must be true .
InstanceCount (integer) --
The number of data nodes to use in the Elasticsearch domain.
InstanceType (string) --
The instance type for your data nodes. For example, m3.medium.elasticsearch .
ZoneAwarenessConfig (dict) --
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
AvailabilityZoneCount (integer) --
he number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
ZoneAwarenessEnabled (boolean) --
Whether to enable zone awareness for the Elasticsearch domain. When zone awareness is enabled, OpenSearch allocates the cluster's nodes and replica index shards across Availability Zones in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a .
LogPublishingOptions (dict) --
Configures the CloudWatch Logs to publish for the Elasticsearch domain.
IndexSlowLogs (dict) --
Configures the OpenSearch index logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
SearchSlowLogs (dict) --
Configures the OpenSearch search slow log publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
AuditLogs (dict) --
The log configuration.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
ServiceSoftwareOptions (dict) --
Information about the status of a domain relative to the latest service software.
AutomatedUpdateDate (string) --
The epoch time when the deployment window closes for required updates. After this time, Amazon OpenSearch Service schedules the software upgrade automatically.
Cancellable (boolean) --
Whether a request to update the domain can be canceled.
CurrentVersion (string) --
The version of the service software that is currently installed on the domain.
Description (string) --
A more detailed description of the service software status.
NewVersion (string) --
The most recent version of the service software.
UpdateAvailable (boolean) --
Whether a service software update is available for the domain.
UpdateStatus (string) --
The status of the service software update.
VPCOptions (dict) --
Information that OpenSearch derives based on VPCOptions for the domain.
AvailabilityZones (list) --
The list of Availability Zones associated with the VPC subnets.
SecurityGroupIds (list) --
The list of security group IDs associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs associated with the VPC endpoints for the domain.
VPCId (string) --
ID for the VPC.
AwsS3Bucket (dict) --
Details about an S3 bucket related to a finding.
OwnerId (string) --
The canonical user ID of the owner of the S3 bucket.
OwnerName (string) --
The display name of the owner of the S3 bucket.
OwnerAccountId (string) --
The Amazon Web Services account identifier of the account that owns the S3 bucket.
CreatedAt (string) --
Indicates when the S3 bucket was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ServerSideEncryptionConfiguration (dict) --
The encryption rules that are applied to the S3 bucket.
Rules (list) --
The encryption rules that are applied to the S3 bucket.
(dict) --
An encryption rule to apply to the S3 bucket.
ApplyServerSideEncryptionByDefault (dict) --
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
SSEAlgorithm (string) --
Server-side encryption algorithm to use for the default encryption.
KMSMasterKeyID (string) --
KMS key ID to use for the default encryption.
BucketLifecycleConfiguration (dict) --
The lifecycle configuration for objects in the S3 bucket.
Rules (list) --
The lifecycle rules.
(dict) --
Configuration for a lifecycle rule.
AbortIncompleteMultipartUpload (dict) --
How Amazon S3 responds when a multipart upload is incomplete. Specifically, provides a number of days before Amazon S3 cancels the entire upload.
DaysAfterInitiation (integer) --
The number of days after which Amazon S3 cancels an incomplete multipart upload.
ExpirationDate (string) --
The date when objects are moved or deleted.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ExpirationInDays (integer) --
The length in days of the lifetime for objects that are subject to the rule.
ExpiredObjectDeleteMarker (boolean) --
Whether Amazon S3 removes a delete marker that has no noncurrent versions. If set to true , the delete marker is expired. If set to false , the policy takes no action.
If you provide ExpiredObjectDeleteMarker , you cannot provide ExpirationInDays or ExpirationDate .
Filter (dict) --
Identifies the objects that a rule applies to.
Predicate (dict) --
The configuration for the filter.
Operands (list) --
The values to use for the filter.
(dict) --
A value to use for the filter.
Prefix (string) --
Prefix text for matching objects.
Tag (dict) --
A tag that is assigned to matching objects.
Key (string) --
The tag key.
Value (string) --
The tag value.
Type (string) --
The type of filter value.
Prefix (string) --
A prefix filter.
Tag (dict) --
A tag filter.
Key (string) --
The tag key.
Value (string) --
The tag value
Type (string) --
Whether to use AND or OR to join the operands.
ID (string) --
The unique identifier of the rule.
NoncurrentVersionExpirationInDays (integer) --
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
NoncurrentVersionTransitions (list) --
Transition rules that describe when noncurrent objects transition to a specified storage class.
(dict) --
A transition rule that describes when noncurrent objects transition to a specified storage class.
Days (integer) --
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
StorageClass (string) --
The class of storage to change the object to after the object is noncurrent for the specified number of days.
Prefix (string) --
A prefix that identifies one or more objects that the rule applies to.
Status (string) --
The current status of the rule. Indicates whether the rule is currently being applied.
Transitions (list) --
Transition rules that indicate when objects transition to a specified storage class.
(dict) --
A rule for when objects transition to specific storage classes.
Date (string) --
A date on which to transition objects to the specified storage class. If you provide Date , you cannot provide Days .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Days (integer) --
The number of days after which to transition the object to the specified storage class. If you provide Days , you cannot provide Date .
StorageClass (string) --
The storage class to transition the object to.
PublicAccessBlockConfiguration (dict) --
Provides information about the Amazon S3 Public Access Block configuration for the S3 bucket.
BlockPublicAcls (boolean) --
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
BlockPublicPolicy (boolean) --
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
IgnorePublicAcls (boolean) --
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
RestrictPublicBuckets (boolean) --
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
AccessControlList (string) --
The access control list for the S3 bucket.
BucketLoggingConfiguration (dict) --
The logging configuration for the S3 bucket.
DestinationBucketName (string) --
The name of the S3 bucket where log files for the S3 bucket are stored.
LogFilePrefix (string) --
The prefix added to log files for the S3 bucket.
BucketWebsiteConfiguration (dict) --
The website configuration parameters for the S3 bucket.
ErrorDocument (string) --
The name of the error document for the website.
IndexDocumentSuffix (string) --
The name of the index document for the website.
RedirectAllRequestsTo (dict) --
The redirect behavior for requests to the website.
Hostname (string) --
The name of the host to redirect requests to.
Protocol (string) --
The protocol to use when redirecting requests. By default, uses the same protocol as the original request.
RoutingRules (list) --
The rules for applying redirects for requests to the website.
(dict) --
A rule for redirecting requests to the website.
Condition (dict) --
Provides the condition that must be met in order to apply the routing rule.
HttpErrorCodeReturnedEquals (string) --
Indicates to redirect the request if the HTTP error code matches this value.
KeyPrefixEquals (string) --
Indicates to redirect the request if the key prefix matches this value.
Redirect (dict) --
Provides the rules to redirect the request if the condition in Condition is met.
Hostname (string) --
The host name to use in the redirect request.
HttpRedirectCode (string) --
The HTTP redirect code to use in the response.
Protocol (string) --
The protocol to use to redirect the request. By default, uses the protocol from the original request.
ReplaceKeyPrefixWith (string) --
The object key prefix to use in the redirect request.
Cannot be provided if ReplaceKeyWith is present.
ReplaceKeyWith (string) --
The specific object key to use in the redirect request.
Cannot be provided if ReplaceKeyPrefixWith is present.
BucketNotificationConfiguration (dict) --
The notification configuration for the S3 bucket.
Configurations (list) --
Configurations for S3 bucket notifications.
(dict) --
Details for an S3 bucket notification configuration.
Events (list) --
The list of events that trigger a notification.
Filter (dict) --
The filters that determine which S3 buckets generate notifications.
S3KeyFilter (dict) --
Details for an Amazon S3 filter.
FilterRules (list) --
The filter rules for the filter.
(dict) --
Details for a filter rule.
Name (string) --
Indicates whether the filter is based on the prefix or suffix of the Amazon S3 key.
Value (string) --
The filter value.
Destination (string) --
The ARN of the Lambda function, Amazon SQS queue, or Amazon SNS topic that generates the notification.
Type (string) --
Indicates the type of notification. Notifications can be generated using Lambda functions, Amazon SQS queues or Amazon SNS topics.
BucketVersioningConfiguration (dict) --
The versioning state of an S3 bucket.
IsMfaDeleteEnabled (boolean) --
Specifies whether MFA delete is currently enabled in the S3 bucket versioning configuration. If the S3 bucket was never configured with MFA delete, then this attribute is not included.
Status (string) --
The versioning status of the S3 bucket.
AwsS3AccountPublicAccessBlock (dict) --
Details about the Amazon S3 Public Access Block configuration for an account.
BlockPublicAcls (boolean) --
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
BlockPublicPolicy (boolean) --
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
IgnorePublicAcls (boolean) --
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
RestrictPublicBuckets (boolean) --
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
AwsS3Object (dict) --
Details about an S3 object related to a finding.
LastModified (string) --
Indicates when the object was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ETag (string) --
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
VersionId (string) --
The version of the object.
ContentType (string) --
A standard MIME type describing the format of the object data.
ServerSideEncryption (string) --
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
SSEKMSKeyId (string) --
The identifier of the KMS symmetric customer managed key that was used for the object.
AwsSecretsManagerSecret (dict) --
Details about a Secrets Manager secret.
RotationRules (dict) --
Defines the rotation schedule for the secret.
AutomaticallyAfterDays (integer) --
The number of days after the previous rotation to rotate the secret.
RotationOccurredWithinFrequency (boolean) --
Whether the rotation occurred within the specified rotation frequency.
KmsKeyId (string) --
The ARN, Key ID, or alias of the KMS key used to encrypt the SecretString or SecretBinary values for versions of this secret.
RotationEnabled (boolean) --
Whether rotation is enabled.
RotationLambdaArn (string) --
The ARN of the Lambda function that rotates the secret.
Deleted (boolean) --
Whether the secret is deleted.
Name (string) --
The name of the secret.
Description (string) --
The user-provided description of the secret.
AwsIamAccessKey (dict) --
Details about an IAM access key related to a finding.
UserName (string) --
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
Status (string) --
The status of the IAM access key related to a finding.
CreatedAt (string) --
Indicates when the IAM access key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
PrincipalId (string) --
The ID of the principal associated with an access key.
PrincipalType (string) --
The type of principal associated with an access key.
PrincipalName (string) --
The name of the principal.
AccountId (string) --
The Amazon Web Services account ID of the account for the key.
AccessKeyId (string) --
The identifier of the access key.
SessionContext (dict) --
Information about the session that the key was used for.
Attributes (dict) --
Attributes of the session that the key was used for.
MfaAuthenticated (boolean) --
Indicates whether the session used multi-factor authentication (MFA).
CreationDate (string) --
Indicates when the session was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
SessionIssuer (dict) --
Information about the entity that created the session.
Type (string) --
The type of principal (user, role, or group) that created the session.
PrincipalId (string) --
The principal ID of the principal (user, role, or group) that created the session.
Arn (string) --
The ARN of the session.
AccountId (string) --
The identifier of the Amazon Web Services account that created the session.
UserName (string) --
The name of the principal that created the session.
AwsIamUser (dict) --
Details about an IAM user.
AttachedManagedPolicies (list) --
A list of the managed policies that are attached to the user.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the user was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GroupList (list) --
A list of IAM groups that the user belongs to.
Path (string) --
The path to the user.
PermissionsBoundary (dict) --
The permissions boundary for the user.
PermissionsBoundaryArn (string) --
The ARN of the policy used to set the permissions boundary.
PermissionsBoundaryType (string) --
The usage type for the permissions boundary.
UserId (string) --
The unique identifier for the user.
UserName (string) --
The name of the user.
UserPolicyList (list) --
The list of inline policies that are embedded in the user.
(dict) --
Information about an inline policy that is embedded in the user.
PolicyName (string) --
The name of the policy.
AwsIamPolicy (dict) --
Details about an IAM permissions policy.
AttachmentCount (integer) --
The number of users, groups, and roles that the policy is attached to.
CreateDate (string) --
When the policy was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DefaultVersionId (string) --
The identifier of the default version of the policy.
Description (string) --
A description of the policy.
IsAttachable (boolean) --
Whether the policy can be attached to a user, group, or role.
Path (string) --
The path to the policy.
PermissionsBoundaryUsageCount (integer) --
The number of users and roles that use the policy to set the permissions boundary.
PolicyId (string) --
The unique identifier of the policy.
PolicyName (string) --
The name of the policy.
PolicyVersionList (list) --
List of versions of the policy.
(dict) --
A version of an IAM policy.
VersionId (string) --
The identifier of the policy version.
IsDefaultVersion (boolean) --
Whether the version is the default version.
CreateDate (string) --
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
UpdateDate (string) --
When the policy was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsApiGatewayV2Stage (dict) --
Provides information about a version 2 stage for Amazon API Gateway.
ClientCertificateId (string) --
The identifier of a client certificate for a stage. Supported only for WebSocket API calls.
CreatedDate (string) --
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Description (string) --
The description of the stage.
DefaultRouteSettings (dict) --
Default route settings for the stage.
DetailedMetricsEnabled (boolean) --
Indicates whether detailed metrics are enabled.
LoggingLevel (string) --
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
ThrottlingBurstLimit (integer) --
The throttling burst limit.
ThrottlingRateLimit (float) --
The throttling rate limit.
DeploymentId (string) --
The identifier of the deployment that the stage is associated with.
LastUpdatedDate (string) --
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RouteSettings (dict) --
The route settings for the stage.
DetailedMetricsEnabled (boolean) --
Indicates whether detailed metrics are enabled.
LoggingLevel (string) --
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
ThrottlingBurstLimit (integer) --
The throttling burst limit.
ThrottlingRateLimit (float) --
The throttling rate limit.
StageName (string) --
The name of the stage.
StageVariables (dict) --
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
AccessLogSettings (dict) --
Information about settings for logging access for the stage.
Format (string) --
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
DestinationArn (string) --
The ARN of the CloudWatch Logs log group that receives the access logs.
AutoDeploy (boolean) --
Indicates whether updates to an API automatically trigger a new deployment.
LastDeploymentStatusMessage (string) --
The status of the last deployment of a stage. Supported only if the stage has automatic deployment enabled.
ApiGatewayManaged (boolean) --
Indicates whether the stage is managed by API Gateway.
AwsApiGatewayV2Api (dict) --
Provides information about a version 2 API in Amazon API Gateway.
ApiEndpoint (string) --
The URI of the API.
Uses the format `` <api-id> .execute-api.*<region>* .amazonaws.com``
The stage name is typically appended to the URI to form a complete path to a deployed API stage.
ApiId (string) --
The identifier of the API.
ApiKeySelectionExpression (string) --
An API key selection expression. Supported only for WebSocket APIs.
CreatedDate (string) --
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Description (string) --
A description of the API.
Version (string) --
The version identifier for the API.
Name (string) --
The name of the API.
ProtocolType (string) --
The API protocol for the API.
Valid values: WEBSOCKET | HTTP
RouteSelectionExpression (string) --
The route selection expression for the API.
For HTTP APIs, must be ${request.method} ${request.path} . This is the default value for HTTP APIs.
For WebSocket APIs, there is no default value.
CorsConfiguration (dict) --
A cross-origin resource sharing (CORS) configuration. Supported only for HTTP APIs.
AllowOrigins (list) --
The allowed origins for CORS requests.
AllowCredentials (boolean) --
Indicates whether the CORS request includes credentials.
ExposeHeaders (list) --
The exposed headers for CORS requests.
MaxAge (integer) --
The number of seconds for which the browser caches preflight request results.
AllowMethods (list) --
The allowed methods for CORS requests.
AllowHeaders (list) --
The allowed headers for CORS requests.
AwsDynamoDbTable (dict) --
Details about a DynamoDB table.
AttributeDefinitions (list) --
A list of attribute definitions for the table.
(dict) --
Contains a definition of an attribute for the table.
AttributeName (string) --
The name of the attribute.
AttributeType (string) --
The type of the attribute.
BillingModeSummary (dict) --
Information about the billing for read/write capacity on the table.
BillingMode (string) --
The method used to charge for read and write throughput and to manage capacity.
LastUpdateToPayPerRequestDateTime (string) --
If the billing mode is PAY_PER_REQUEST , indicates when the billing mode was set to that value.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
CreationDateTime (string) --
Indicates when the table was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GlobalSecondaryIndexes (list) --
List of global secondary indexes for the table.
(dict) --
Information abut a global secondary index for the table.
Backfilling (boolean) --
Whether the index is currently backfilling.
IndexArn (string) --
The ARN of the index.
IndexName (string) --
The name of the index.
IndexSizeBytes (integer) --
The total size in bytes of the index.
IndexStatus (string) --
The current status of the index.
ItemCount (integer) --
The number of items in the index.
KeySchema (list) --
The key schema for the index.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
Projection (dict) --
Attributes that are copied from the table into an index.
NonKeyAttributes (list) --
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
ProjectionType (string) --
The types of attributes that are projected into the index.
ProvisionedThroughput (dict) --
Information about the provisioned throughput settings for the indexes.
LastDecreaseDateTime (string) --
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastIncreaseDateTime (string) --
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NumberOfDecreasesToday (integer) --
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
ReadCapacityUnits (integer) --
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
WriteCapacityUnits (integer) --
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
GlobalTableVersion (string) --
The version of global tables being used.
ItemCount (integer) --
The number of items in the table.
KeySchema (list) --
The primary key structure for the table.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
LatestStreamArn (string) --
The ARN of the latest stream for the table.
LatestStreamLabel (string) --
The label of the latest stream. The label is not a unique identifier.
LocalSecondaryIndexes (list) --
The list of local secondary indexes for the table.
(dict) --
Information about a local secondary index for a DynamoDB table.
IndexArn (string) --
The ARN of the index.
IndexName (string) --
The name of the index.
KeySchema (list) --
The complete key schema for the index.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
Projection (dict) --
Attributes that are copied from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected.
NonKeyAttributes (list) --
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
ProjectionType (string) --
The types of attributes that are projected into the index.
ProvisionedThroughput (dict) --
Information about the provisioned throughput for the table.
LastDecreaseDateTime (string) --
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastIncreaseDateTime (string) --
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NumberOfDecreasesToday (integer) --
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
ReadCapacityUnits (integer) --
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
WriteCapacityUnits (integer) --
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
Replicas (list) --
The list of replicas of this table.
(dict) --
Information about a replica of a DynamoDB table.
GlobalSecondaryIndexes (list) --
List of global secondary indexes for the replica.
(dict) --
Information about a global secondary index for a DynamoDB table replica.
IndexName (string) --
The name of the index.
ProvisionedThroughputOverride (dict) --
Replica-specific configuration for the provisioned throughput for the index.
ReadCapacityUnits (integer) --
The read capacity units for the replica.
KmsMasterKeyId (string) --
The identifier of the KMS key that will be used for KMS encryption for the replica.
ProvisionedThroughputOverride (dict) --
Replica-specific configuration for the provisioned throughput.
ReadCapacityUnits (integer) --
The read capacity units for the replica.
RegionName (string) --
The name of the Region where the replica is located.
ReplicaStatus (string) --
The current status of the replica.
ReplicaStatusDescription (string) --
Detailed information about the replica status.
RestoreSummary (dict) --
Information about the restore for the table.
SourceBackupArn (string) --
The ARN of the source backup from which the table was restored.
SourceTableArn (string) --
The ARN of the source table for the backup.
RestoreDateTime (string) --
Indicates the point in time that the table was restored to.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RestoreInProgress (boolean) --
Whether a restore is currently in progress.
SseDescription (dict) --
Information about the server-side encryption for the table.
InaccessibleEncryptionDateTime (string) --
If the key is inaccessible, the date and time when DynamoDB detected that the key was inaccessible.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Status (string) --
The status of the server-side encryption.
SseType (string) --
The type of server-side encryption.
KmsMasterKeyArn (string) --
The ARN of the KMS key that is used for the KMS encryption.
StreamSpecification (dict) --
The current DynamoDB Streams configuration for the table.
StreamEnabled (boolean) --
Indicates whether DynamoDB Streams is enabled on the table.
StreamViewType (string) --
Determines the information that is written to the table.
TableId (string) --
The identifier of the table.
TableName (string) --
The name of the table.
TableSizeBytes (integer) --
The total size of the table in bytes.
TableStatus (string) --
The current status of the table.
AwsApiGatewayStage (dict) --
Provides information about a version 1 Amazon API Gateway stage.
DeploymentId (string) --
The identifier of the deployment that the stage points to.
ClientCertificateId (string) --
The identifier of the client certificate for the stage.
StageName (string) --
The name of the stage.
Description (string) --
A description of the stage.
CacheClusterEnabled (boolean) --
Indicates whether a cache cluster is enabled for the stage.
CacheClusterSize (string) --
If a cache cluster is enabled, the size of the cache cluster.
CacheClusterStatus (string) --
If a cache cluster is enabled, the status of the cache cluster.
MethodSettings (list) --
Defines the method settings for the stage.
(dict) --
Defines settings for a method for the stage.
MetricsEnabled (boolean) --
Indicates whether CloudWatch metrics are enabled for the method.
LoggingLevel (string) --
The logging level for this method. The logging level affects the log entries that are pushed to CloudWatch Logs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled for the method. Data trace logging affects the log entries that are pushed to CloudWatch Logs.
ThrottlingBurstLimit (integer) --
The throttling burst limit for the method.
ThrottlingRateLimit (float) --
The throttling rate limit for the method.
CachingEnabled (boolean) --
Indicates whether responses are cached and returned for requests. For responses to be cached, a cache cluster must be enabled on the stage.
CacheTtlInSeconds (integer) --
Specifies the time to live (TTL), in seconds, for cached responses. The higher the TTL, the longer the response is cached.
CacheDataEncrypted (boolean) --
Indicates whether the cached responses are encrypted.
RequireAuthorizationForCacheControl (boolean) --
Indicates whether authorization is required for a cache invalidation request.
UnauthorizedCacheControlHeaderStrategy (string) --
Indicates how to handle unauthorized requests for cache invalidation.
Valid values: FAIL_WITH_403 | SUCCEED_WITH_RESPONSE_HEADER | SUCCEED_WITHOUT_RESPONSE_HEADER
HttpMethod (string) --
The HTTP method. You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
ResourcePath (string) --
The resource path for this method. Forward slashes (/) are encoded as ~1 . The initial slash must include a forward slash.
For example, the path value /resource/subresource must be encoded as /~1resource~1subresource .
To specify the root path, use only a slash (/). You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
Variables (dict) --
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
DocumentationVersion (string) --
The version of the API documentation that is associated with the stage.
AccessLogSettings (dict) --
Settings for logging access for the stage.
Format (string) --
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
DestinationArn (string) --
The ARN of the CloudWatch Logs log group that receives the access logs.
CanarySettings (dict) --
Information about settings for canary deployment in the stage.
PercentTraffic (float) --
The percentage of traffic that is diverted to a canary deployment.
DeploymentId (string) --
The deployment identifier for the canary deployment.
StageVariableOverrides (dict) --
Stage variables that are overridden in the canary release deployment. The variables include new stage variables that are introduced in the canary.
Each variable is represented as a string-to-string map between the stage variable name and the variable value.
UseStageCache (boolean) --
Indicates whether the canary deployment uses the stage cache.
TracingEnabled (boolean) --
Indicates whether active tracing with X-Ray is enabled for the stage.
CreatedDate (string) --
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastUpdatedDate (string) --
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
WebAclArn (string) --
The ARN of the web ACL associated with the stage.
AwsApiGatewayRestApi (dict) --
Provides information about a REST API in version 1 of Amazon API Gateway.
Id (string) --
The identifier of the REST API.
Name (string) --
The name of the REST API.
Description (string) --
A description of the REST API.
CreatedDate (string) --
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Version (string) --
The version identifier for the REST API.
BinaryMediaTypes (list) --
The list of binary media types supported by the REST API.
MinimumCompressionSize (integer) --
The minimum size in bytes of a payload before compression is enabled.
If null , then compression is disabled.
If 0, then all payloads are compressed.
ApiKeySource (string) --
The source of the API key for metering requests according to a usage plan.
HEADERindicates whether to read the API key from the X-API-Key header of a request.
AUTHORIZERindicates whether to read the API key from theUsageIdentifierKeyfrom a custom authorizer.
EndpointConfiguration (dict) --
The endpoint configuration of the REST API.
Types (list) --
A list of endpoint types for the REST API.
For an edge-optimized API, the endpoint type is EDGE . For a Regional API, the endpoint type is REGIONAL . For a private API, the endpoint type is PRIVATE .
AwsCloudTrailTrail (dict) --
Provides details about a CloudTrail trail.
CloudWatchLogsLogGroupArn (string) --
The ARN of the log group that CloudTrail logs are delivered to.
CloudWatchLogsRoleArn (string) --
The ARN of the role that the CloudWatch Events endpoint assumes when it writes to the log group.
HasCustomEventSelectors (boolean) --
Indicates whether the trail has custom event selectors.
HomeRegion (string) --
The Region where the trail was created.
IncludeGlobalServiceEvents (boolean) --
Indicates whether the trail publishes events from global services such as IAM to the log files.
IsMultiRegionTrail (boolean) --
Indicates whether the trail applies only to the current Region or to all Regions.
IsOrganizationTrail (boolean) --
Whether the trail is created for all accounts in an organization in Organizations, or only for the current Amazon Web Services account.
KmsKeyId (string) --
The KMS key ID to use to encrypt the logs.
LogFileValidationEnabled (boolean) --
Indicates whether CloudTrail log file validation is enabled.
Name (string) --
The name of the trail.
S3BucketName (string) --
The name of the S3 bucket where the log files are published.
S3KeyPrefix (string) --
The S3 key prefix. The key prefix is added after the name of the S3 bucket where the log files are published.
SnsTopicArn (string) --
The ARN of the SNS topic that is used for notifications of log file delivery.
SnsTopicName (string) --
The name of the SNS topic that is used for notifications of log file delivery.
TrailArn (string) --
The ARN of the trail.
AwsSsmPatchCompliance (dict) --
Provides information about the state of a patch on an instance based on the patch baseline that was used to patch the instance.
Patch (dict) --
Information about the status of a patch.
ComplianceSummary (dict) --
The compliance status details for the patch.
Status (string) --
The current patch compliance status.
The possible status values are:
COMPLIANTNON_COMPLIANTUNSPECIFIED_DATACompliantCriticalCount (integer) --
For the patches that are compliant, the number that have a severity of CRITICAL .
CompliantHighCount (integer) --
For the patches that are compliant, the number that have a severity of HIGH .
CompliantMediumCount (integer) --
For the patches that are compliant, the number that have a severity of MEDIUM .
ExecutionType (string) --
The type of execution that was used determine compliance.
NonCompliantCriticalCount (integer) --
For the patch items that are noncompliant, the number of items that have a severity of CRITICAL .
CompliantInformationalCount (integer) --
For the patches that are compliant, the number that have a severity of INFORMATIONAL .
NonCompliantInformationalCount (integer) --
For the patches that are noncompliant, the number that have a severity of INFORMATIONAL .
CompliantUnspecifiedCount (integer) --
For the patches that are compliant, the number that have a severity of UNSPECIFIED .
NonCompliantLowCount (integer) --
For the patches that are noncompliant, the number that have a severity of LOW .
NonCompliantHighCount (integer) --
For the patches that are noncompliant, the number that have a severity of HIGH .
CompliantLowCount (integer) --
For the patches that are compliant, the number that have a severity of LOW .
ComplianceType (string) --
The type of resource for which the compliance was determined. For AwsSsmPatchCompliance , ComplianceType is Patch .
PatchBaselineId (string) --
The identifier of the patch baseline. The patch baseline lists the patches that are approved for installation.
OverallSeverity (string) --
The highest severity for the patches.
NonCompliantMediumCount (integer) --
For the patches that are noncompliant, the number that have a severity of MEDIUM .
NonCompliantUnspecifiedCount (integer) --
For the patches that are noncompliant, the number that have a severity of UNSPECIFIED .
PatchGroup (string) --
The identifier of the patch group for which compliance was determined. A patch group uses tags to group EC2 instances that should have the same patch compliance.
AwsCertificateManagerCertificate (dict) --
Provides details about an Certificate Manager certificate.
CertificateAuthorityArn (string) --
The ARN of the private certificate authority (CA) that will be used to issue the certificate.
CreatedAt (string) --
Indicates when the certificate was requested.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DomainName (string) --
The fully qualified domain name (FQDN), such as www.example.com, that is secured by the certificate.
DomainValidationOptions (list) --
Contains information about the initial validation of each domain name that occurs as a result of the RequestCertificate request.
Only provided if the certificate type is AMAZON_ISSUED .
(dict) --
Contains information about one of the following:
RequestCertificate requestDomainName (string) --
A fully qualified domain name (FQDN) in the certificate.
ResourceRecord (dict) --
The CNAME record that is added to the DNS database for domain validation.
Name (string) --
The name of the resource.
Type (string) --
The type of resource.
Value (string) --
The value of the resource.
ValidationDomain (string) --
The domain name that Certificate Manager uses to send domain validation emails.
ValidationEmails (list) --
A list of email addresses that Certificate Manager uses to send domain validation emails.
ValidationMethod (string) --
The method used to validate the domain name.
ValidationStatus (string) --
The validation status of the domain name.
ExtendedKeyUsages (list) --
Contains a list of Extended Key Usage X.509 v3 extension objects. Each object specifies a purpose for which the certificate public key can be used and consists of a name and an object identifier (OID).
(dict) --
Contains information about an extended key usage X.509 v3 extension object.
Name (string) --
The name of an extension value. Indicates the purpose for which the certificate public key can be used.
OId (string) --
An object identifier (OID) for the extension value.
The format is numbers separated by periods.
FailureReason (string) --
For a failed certificate request, the reason for the failure.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
ImportedAt (string) --
Indicates when the certificate was imported. Provided if the certificate type is IMPORTED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InUseBy (list) --
The list of ARNs for the Amazon Web Services resources that use the certificate.
IssuedAt (string) --
Indicates when the certificate was issued. Provided if the certificate type is AMAZON_ISSUED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Issuer (string) --
The name of the certificate authority that issued and signed the certificate.
KeyAlgorithm (string) --
The algorithm that was used to generate the public-private key pair.
Valid values: RSA_2048 | RSA_1024 |RSA_4096 | EC_prime256v1 | EC_secp384r1 | EC_secp521r1
KeyUsages (list) --
A list of key usage X.509 v3 extension objects.
(dict) --
Contains information about a key usage X.509 v3 extension object.
Name (string) --
The key usage extension name.
NotAfter (string) --
The time after which the certificate becomes invalid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NotBefore (string) --
The time before which the certificate is not valid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Options (dict) --
Provides a value that specifies whether to add the certificate to a transparency log.
CertificateTransparencyLoggingPreference (string) --
Whether to add the certificate to a transparency log.
Valid values: DISABLED | ENABLED
RenewalEligibility (string) --
Whether the certificate is eligible for renewal.
Valid values: ELIGIBLE | INELIGIBLE
RenewalSummary (dict) --
Information about the status of the Certificate Manager managed renewal for the certificate. Provided only when the certificate type is AMAZON_ISSUED .
DomainValidationOptions (list) --
Information about the validation of each domain name in the certificate, as it pertains to Certificate Manager managed renewal. Provided only when the certificate type is AMAZON_ISSUED .
(dict) --
Contains information about one of the following:
RequestCertificate requestDomainName (string) --
A fully qualified domain name (FQDN) in the certificate.
ResourceRecord (dict) --
The CNAME record that is added to the DNS database for domain validation.
Name (string) --
The name of the resource.
Type (string) --
The type of resource.
Value (string) --
The value of the resource.
ValidationDomain (string) --
The domain name that Certificate Manager uses to send domain validation emails.
ValidationEmails (list) --
A list of email addresses that Certificate Manager uses to send domain validation emails.
ValidationMethod (string) --
The method used to validate the domain name.
ValidationStatus (string) --
The validation status of the domain name.
RenewalStatus (string) --
The status of the Certificate Manager managed renewal of the certificate.
Valid values: PENDING_AUTO_RENEWAL | PENDING_VALIDATION | SUCCESS | FAILED
RenewalStatusReason (string) --
The reason that a renewal request was unsuccessful.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
UpdatedAt (string) --
Indicates when the renewal summary was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Serial (string) --
The serial number of the certificate.
SignatureAlgorithm (string) --
The algorithm that was used to sign the certificate.
Status (string) --
The status of the certificate.
Valid values: PENDING_VALIDATION | ISSUED | INACTIVE | EXPIRED | VALIDATION_TIMED_OUT | REVOKED | FAILED
Subject (string) --
The name of the entity that is associated with the public key contained in the certificate.
SubjectAlternativeNames (list) --
One or more domain names (subject alternative names) included in the certificate. This list contains the domain names that are bound to the public key that is contained in the certificate.
The subject alternative names include the canonical domain name (CN) of the certificate and additional domain names that can be used to connect to the website.
Type (string) --
The source of the certificate. For certificates that Certificate Manager provides, Type is AMAZON_ISSUED . For certificates that are imported with ImportCertificate , Type is IMPORTED .
Valid values: IMPORTED | AMAZON_ISSUED | PRIVATE
AwsRedshiftCluster (dict) --
Contains details about an Amazon Redshift cluster.
AllowVersionUpgrade (boolean) --
Indicates whether major version upgrades are applied automatically to the cluster during the maintenance window.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
ClusterAvailabilityStatus (string) --
The availability status of the cluster for queries. Possible values are the following:
Available - The cluster is available for queries.Unavailable - The cluster is not available for queries.Maintenance - The cluster is intermittently available for queries due to maintenance activities.Modifying -The cluster is intermittently available for queries due to changes that modify the cluster.Failed - The cluster failed and is not available for queries.ClusterCreateTime (string) --
Indicates when the cluster was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ClusterIdentifier (string) --
The unique identifier of the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
A node in an Amazon Redshift cluster.
NodeRole (string) --
The role of the node. A node might be a leader node or a compute node.
PrivateIpAddress (string) --
The private IP address of the node.
PublicIpAddress (string) --
The public IP address of the node.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster.
(dict) --
A cluster parameter group that is associated with an Amazon Redshift cluster.
ClusterParameterStatusList (list) --
The list of parameter statuses.
(dict) --
The status of a parameter in a cluster parameter group for an Amazon Redshift cluster.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter. Indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when it was applied.
Valid values: in-sync | pending-reboot | applying | invalid-parameter | apply-deferred | apply-error | unknown-error
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ParameterApplyStatus (string) --
The status of updates to the parameters.
ParameterGroupName (string) --
The name of the parameter group.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
ClusterSecurityGroups (list) --
A list of cluster security groups that are associated with the cluster.
(dict) --
A security group that is associated with the cluster.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
ClusterSnapshotCopyStatus (dict) --
Information about the destination Region and retention period for the cross-Region snapshot copy.
DestinationRegion (string) --
The destination Region that snapshots are automatically copied to when cross-Region snapshot copy is enabled.
ManualSnapshotRetentionPeriod (integer) --
The number of days that manual snapshots are retained in the destination region after they are copied from a source region.
If the value is -1 , then the manual snapshot is retained indefinitely.
Valid values: Either -1 or an integer between 1 and 3,653
RetentionPeriod (integer) --
The number of days to retain automated snapshots in the destination Region after they are copied from a source Region.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterStatus (string) --
The current status of the cluster.
Valid values: available | available, prep-for-resize | available, resize-cleanup |cancelling-resize | creating | deleting | final-snapshot | hardware-failure | incompatible-hsm |incompatible-network | incompatible-parameters | incompatible-restore | modifying | paused | rebooting | renaming | resizing | rotating-keys | storage-full | updating-hsm
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that runs on the cluster.
DBName (string) --
The name of the initial database that was created when the cluster was created.
The same name is returned for the life of the cluster.
If an initial database is not specified, a database named devdev is created by default.
DeferredMaintenanceWindows (list) --
List of time windows during which maintenance was deferred.
(dict) --
A time windows during which maintenance was deferred for an Amazon Redshift cluster.
DeferMaintenanceEndTime (string) --
The end of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DeferMaintenanceIdentifier (string) --
The identifier of the maintenance window.
DeferMaintenanceStartTime (string) --
The start of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ElasticIpStatus (dict) --
Information about the status of the Elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP address for the cluster.
Status (string) --
The status of the elastic IP address.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can use the elastic resize method to resize the cluster to.
Encrypted (boolean) --
Indicates whether the data in the cluster is encrypted at rest.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the cluster.
Port (integer) --
The port that the database engine listens on.
EnhancedVpcRouting (boolean) --
Indicates whether to create the cluster with enhanced VPC routing enabled.
ExpectedNextSnapshotScheduleTime (string) --
Indicates when the next snapshot is expected to be taken. The cluster must have a valid snapshot schedule and have backups enabled.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ExpectedNextSnapshotScheduleTimeStatus (string) --
The status of the next expected snapshot.
Valid values: OnTrack | Pending
HsmStatus (dict) --
Information about whether the Amazon Redshift cluster finished applying any changes to hardware security module (HSM) settings that were specified in a modify cluster command.
HsmClientCertificateIdentifier (string) --
The name of the HSM client certificate that the Amazon Redshift cluster uses to retrieve the data encryption keys that are stored in an HSM.
HsmConfigurationIdentifier (string) --
The name of the HSM configuration that contains the information that the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Indicates whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Type: String
Valid values: active | applying
IamRoles (list) --
A list of IAM roles that the cluster can use to access other Amazon Web Services services.
(dict) --
An IAM role that the cluster can use to access other Amazon Web Services services.
ApplyStatus (string) --
The status of the IAM role's association with the cluster.
Valid values: in-sync | adding | removing
IamRoleArn (string) --
The ARN of the IAM role.
KmsKeyId (string) --
The identifier of the KMS encryption key that is used to encrypt data in the cluster.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot.
If the value is -1 , the snapshot is retained indefinitely.
This setting doesn't change the retention period of existing snapshots.
Valid values: Either -1 or an integer between 1 and 3,653
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in as the value of DBName .
NextMaintenanceWindowStartTime (string) --
Indicates the start of the next maintenance window.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NodeType (string) --
The node type for the nodes in the cluster.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PendingActions (list) --
A list of cluster operations that are waiting to start.
PendingModifiedValues (dict) --
A list of changes to the cluster that are currently pending.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change to the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change to the identifier for the cluster.
ClusterType (string) --
The pending or in-progress change to the cluster type.
ClusterVersion (string) --
The pending or in-progress change to the service version.
EncryptionType (string) --
The encryption type for a cluster.
EnhancedVpcRouting (boolean) --
Indicates whether to create the cluster with enhanced VPC routing enabled.
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster changes to during the next maintenance window.
MasterUserPassword (string) --
The pending or in-progress change to the master user password for the cluster.
NodeType (string) --
The pending or in-progress change to the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change to the number of nodes in the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change to whether the cluster can be connected to from the public network.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
Format: `` <day> :HH:MM-<day> :HH:MM``
For the day values, use mon | tue | wed | thu | fri | sat | sun
For example, sun:09:32-sun:10:02
PubliclyAccessible (boolean) --
Whether the cluster can be accessed from a public network.
ResizeInfo (dict) --
Information about the resize operation for the cluster.
AllowCancelResize (boolean) --
Indicates whether the resize operation can be canceled.
ResizeType (string) --
The type of resize operation.
Valid values: ClassicResize
RestoreStatus (dict) --
Information about the status of a cluster restore action. Only applies to a cluster that was created by restoring a snapshot.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
This field is only updated when you restore to DC2 and DS2 node types.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
This field is only updated when you restore to DC2 and DS2 node types.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore is complete. Returns 0 for a completed restore.
This field is only updated when you restore to DC2 and DS2 node types.
ProgressInMegaBytes (integer) --
The number of megabytes that were transferred from snapshot storage.
This field is only updated when you restore to DC2 and DS2 node types.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data that was used to restore the cluster.
This field is only updated when you restore to DC2 and DS2 node types.
Status (string) --
The status of the restore action.
Valid values: starting | restoring | completed | failed
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
Valid values: MODIFYING | ACTIVE | FAILED
VpcId (string) --
The identifier of the VPC that the cluster is in, if the cluster is in a VPC.
VpcSecurityGroups (list) --
The list of VPC security groups that the cluster belongs to, if the cluster is in a VPC.
(dict) --
A VPC security group that the cluster belongs to, if the cluster is in a VPC.
Status (string) --
The status of the VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
LoggingStatus (dict) --
Information about the logging status of the cluster.
BucketName (string) --
The name of the S3 bucket where the log files are stored.
LastFailureMessage (string) --
The message indicating that the logs failed to be delivered.
LastFailureTime (string) --
The last time when logs failed to be delivered.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastSuccessfulDeliveryTime (string) --
The last time that logs were delivered successfully.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LoggingEnabled (boolean) --
Indicates whether logging is enabled.
S3KeyPrefix (string) --
Provides the prefix applied to the log file names.
AwsElbLoadBalancer (dict) --
Contains details about a Classic Load Balancer.
AvailabilityZones (list) --
The list of Availability Zones for the load balancer.
BackendServerDescriptions (list) --
Information about the configuration of the EC2 instances.
(dict) --
Provides information about the configuration of an EC2 instance for the load balancer.
InstancePort (integer) --
The port on which the EC2 instance is listening.
PolicyNames (list) --
The names of the policies that are enabled for the EC2 instance.
CanonicalHostedZoneName (string) --
The name of the Amazon Route 53 hosted zone for the load balancer.
CanonicalHostedZoneNameID (string) --
The ID of the Amazon Route 53 hosted zone for the load balancer.
CreatedTime (string) --
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DnsName (string) --
The DNS name of the load balancer.
HealthCheck (dict) --
Information about the health checks that are conducted on the load balancer.
HealthyThreshold (integer) --
The number of consecutive health check successes required before the instance is moved to the Healthy state.
Interval (integer) --
The approximate interval, in seconds, between health checks of an individual instance.
Target (string) --
The instance that is being checked. The target specifies the protocol and port. The available protocols are TCP, SSL, HTTP, and HTTPS. The range of valid ports is 1 through 65535.
For the HTTP and HTTPS protocols, the target also specifies the ping path.
For the TCP protocol, the target is specified as ``TCP: <port> `` .
For the SSL protocol, the target is specified as ``SSL.*<port>* `` .
For the HTTP and HTTPS protocols, the target is specified as `` <protocol> :<port> /<path to ping> `` .
Timeout (integer) --
The amount of time, in seconds, during which no response means a failed health check.
UnhealthyThreshold (integer) --
The number of consecutive health check failures that must occur before the instance is moved to the Unhealthy state.
Instances (list) --
List of EC2 instances for the load balancer.
(dict) --
Provides information about an EC2 instance for a load balancer.
InstanceId (string) --
The instance identifier.
ListenerDescriptions (list) --
The policies that are enabled for the load balancer listeners.
(dict) --
Lists the policies that are enabled for a load balancer listener.
Listener (dict) --
Information about the listener.
InstancePort (integer) --
The port on which the instance is listening.
InstanceProtocol (string) --
The protocol to use to route traffic to instances.
Valid values: HTTP | HTTPS | TCP | SSL
LoadBalancerPort (integer) --
The port on which the load balancer is listening.
On EC2-VPC, you can specify any port from the range 1-65535.
On EC2-Classic, you can specify any port from the following list: 25, 80, 443, 465, 587, 1024-65535.
Protocol (string) --
The load balancer transport protocol to use for routing.
Valid values: HTTP | HTTPS | TCP | SSL
SslCertificateId (string) --
The ARN of the server certificate.
PolicyNames (list) --
The policies enabled for the listener.
LoadBalancerAttributes (dict) --
The attributes for a load balancer.
AccessLog (dict) --
Information about the access log configuration for the load balancer.
If the access log is enabled, the load balancer captures detailed information about all requests. It delivers the information to a specified S3 bucket.
EmitInterval (integer) --
The interval in minutes for publishing the access logs.
You can publish access logs either every 5 minutes or every 60 minutes.
Enabled (boolean) --
Indicates whether access logs are enabled for the load balancer.
S3BucketName (string) --
The name of the S3 bucket where the access logs are stored.
S3BucketPrefix (string) --
The logical hierarchy that was created for the S3 bucket.
If a prefix is not provided, the log is placed at the root level of the bucket.
ConnectionDraining (dict) --
Information about the connection draining configuration for the load balancer.
If connection draining is enabled, the load balancer allows existing requests to complete before it shifts traffic away from a deregistered or unhealthy instance.
Enabled (boolean) --
Indicates whether connection draining is enabled for the load balancer.
Timeout (integer) --
The maximum time, in seconds, to keep the existing connections open before deregistering the instances.
ConnectionSettings (dict) --
Connection settings for the load balancer.
If an idle timeout is configured, the load balancer allows connections to remain idle for the specified duration. When a connection is idle, no data is sent over the connection.
IdleTimeout (integer) --
The time, in seconds, that the connection can be idle (no data is sent over the connection) before it is closed by the load balancer.
CrossZoneLoadBalancing (dict) --
Cross-zone load balancing settings for the load balancer.
If cross-zone load balancing is enabled, the load balancer routes the request traffic evenly across all instances regardless of the Availability Zones.
Enabled (boolean) --
Indicates whether cross-zone load balancing is enabled for the load balancer.
AdditionalAttributes (list) --
Any additional attributes for a load balancer.
(dict) --
Provides information about additional attributes for the load balancer.
Key (string) --
The name of the attribute.
Value (string) --
The value of the attribute.
LoadBalancerName (string) --
The name of the load balancer.
Policies (dict) --
The policies for a load balancer.
AppCookieStickinessPolicies (list) --
The stickiness policies that are created using CreateAppCookieStickinessPolicy .
(dict) --
Contains information about a stickiness policy that was created using CreateAppCookieStickinessPolicy .
CookieName (string) --
The name of the application cookie used for stickiness.
PolicyName (string) --
The mnemonic name for the policy being created. The name must be unique within the set of policies for the load balancer.
LbCookieStickinessPolicies (list) --
The stickiness policies that are created using CreateLBCookieStickinessPolicy .
(dict) --
Contains information about a stickiness policy that was created using CreateLBCookieStickinessPolicy .
CookieExpirationPeriod (integer) --
The amount of time, in seconds, after which the cookie is considered stale. If an expiration period is not specified, the stickiness session lasts for the duration of the browser session.
PolicyName (string) --
The name of the policy. The name must be unique within the set of policies for the load balancer.
OtherPolicies (list) --
The policies other than the stickiness policies.
Scheme (string) --
The type of load balancer. Only provided if the load balancer is in a VPC.
If Scheme is internet-facing , the load balancer has a public DNS name that resolves to a public IP address.
If Scheme is internal , the load balancer has a public DNS name that resolves to a private IP address.
SecurityGroups (list) --
The security groups for the load balancer. Only provided if the load balancer is in a VPC.
SourceSecurityGroup (dict) --
Information about the security group for the load balancer. This is the security group that is used for inbound rules.
GroupName (string) --
The name of the security group.
OwnerAlias (string) --
The owner of the security group.
Subnets (list) --
The list of subnet identifiers for the load balancer.
VpcId (string) --
The identifier of the VPC for the load balancer.
AwsIamGroup (dict) --
Contains details about an IAM group.
AttachedManagedPolicies (list) --
A list of the managed policies that are attached to the IAM group.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the IAM group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GroupId (string) --
The identifier of the IAM group.
GroupName (string) --
The name of the IAM group.
GroupPolicyList (list) --
The list of inline policies that are embedded in the group.
(dict) --
A managed policy that is attached to the IAM group.
PolicyName (string) --
The name of the policy.
Path (string) --
The path to the group.
AwsIamRole (dict) --
Details about an IAM role.
AssumeRolePolicyDocument (string) --
The trust policy that grants permission to assume the role.
AttachedManagedPolicies (list) --
The list of the managed policies that are attached to the role.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InstanceProfileList (list) --
The list of instance profiles that contain this role.
(dict) --
Information about an instance profile.
Arn (string) --
The ARN of the instance profile.
CreateDate (string) --
Indicates when the instance profile was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InstanceProfileId (string) --
The identifier of the instance profile.
InstanceProfileName (string) --
The name of the instance profile.
Path (string) --
The path to the instance profile.
Roles (list) --
The roles associated with the instance profile.
(dict) --
Information about a role associated with an instance profile.
Arn (string) --
The ARN of the role.
AssumeRolePolicyDocument (string) --
The policy that grants an entity permission to assume the role.
CreateDate (string) --
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Path (string) --
The path to the role.
RoleId (string) --
The identifier of the role.
RoleName (string) --
The name of the role.
PermissionsBoundary (dict) --
Information about the policy used to set the permissions boundary for an IAM principal.
PermissionsBoundaryArn (string) --
The ARN of the policy used to set the permissions boundary.
PermissionsBoundaryType (string) --
The usage type for the permissions boundary.
RoleId (string) --
The stable and unique string identifying the role.
RoleName (string) --
The friendly name that identifies the role.
RolePolicyList (list) --
The list of inline policies that are embedded in the role.
(dict) --
An inline policy that is embedded in the role.
PolicyName (string) --
The name of the policy.
MaxSessionDuration (integer) --
The maximum session duration (in seconds) that you want to set for the specified role.
Path (string) --
The path to the role.
AwsKmsKey (dict) --
Details about an KMS key.
AWSAccountId (string) --
The twelve-digit account ID of the Amazon Web Services account that owns the KMS key.
CreationDate (float) --
Indicates when the KMS key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
KeyId (string) --
The globally unique identifier for the KMS key.
KeyManager (string) --
The manager of the KMS key. KMS keys in your Amazon Web Services account are either customer managed or Amazon Web Services managed.
KeyState (string) --
The state of the KMS key.
Origin (string) --
The source of the KMS key material.
When this value is AWS_KMS , KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the KMS key lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the CloudHSM cluster associated with a custom key store.
Description (string) --
A description of the KMS key.
KeyRotationStatus (boolean) --
Whether the key has key rotation enabled.
AwsLambdaFunction (dict) --
Details about a Lambda function.
Code (dict) --
An AwsLambdaFunctionCode object.
S3Bucket (string) --
An Amazon S3 bucket in the same Amazon Web Services Region as your function. The bucket can be in a different Amazon Web Services account.
S3Key (string) --
The Amazon S3 key of the deployment package.
S3ObjectVersion (string) --
For versioned objects, the version of the deployment package object to use.
ZipFile (string) --
The base64-encoded contents of the deployment package. Amazon Web Services SDK and Amazon Web Services CLI clients handle the encoding for you.
CodeSha256 (string) --
The SHA256 hash of the function's deployment package.
DeadLetterConfig (dict) --
The function's dead letter queue.
TargetArn (string) --
The ARN of an SQS queue or SNS topic.
Environment (dict) --
The function's environment variables.
Variables (dict) --
Environment variable key-value pairs.
Error (dict) --
An AwsLambdaFunctionEnvironmentError object.
ErrorCode (string) --
The error code.
Message (string) --
The error message.
FunctionName (string) --
The name of the function.
Handler (string) --
The function that Lambda calls to begin executing your function.
KmsKeyArn (string) --
The KMS key that is used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed customer managed key.
LastModified (string) --
Indicates when the function was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Layers (list) --
The function's layers.
(dict) --
An Lambda layer.
Arn (string) --
The ARN of the function layer.
CodeSize (integer) --
The size of the layer archive in bytes.
MasterArn (string) --
For Lambda@Edge functions, the ARN of the master function.
MemorySize (integer) --
The memory that is allocated to the function.
RevisionId (string) --
The latest updated revision of the function or alias.
Role (string) --
The function's execution role.
Runtime (string) --
The runtime environment for the Lambda function.
Timeout (integer) --
The amount of time that Lambda allows a function to run before stopping it.
TracingConfig (dict) --
The function's X-Ray tracing configuration.
Mode (string) --
The tracing mode.
VpcConfig (dict) --
The function's networking configuration.
SecurityGroupIds (list) --
A list of VPC security groups IDs.
SubnetIds (list) --
A list of VPC subnet IDs.
VpcId (string) --
The ID of the VPC.
Version (string) --
The version of the Lambda function.
AwsLambdaLayerVersion (dict) --
Details for a Lambda layer version.
Version (integer) --
The version number.
CompatibleRuntimes (list) --
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
CreatedDate (string) --
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsRdsDbInstance (dict) --
Details about an Amazon RDS database instance.
AssociatedRoles (list) --
The IAM roles associated with the DB instance.
(dict) --
An IAM role associated with the DB instance.
RoleArn (string) --
The ARN of the IAM role that is associated with the DB instance.
FeatureName (string) --
The name of the feature associated with the IAM role.
Status (string) --
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
ACTIVE - The IAM role ARN is associated with the DB instance and can be used to access other Amazon Web Services services on your behalf.PENDING - The IAM role ARN is being associated with the DB instance.INVALID - The IAM role ARN is associated with the DB instance. But the DB instance is unable to assume the IAM role in order to access other Amazon Web Services services on your behalf.CACertificateIdentifier (string) --
The identifier of the CA certificate for this DB instance.
DBClusterIdentifier (string) --
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
DBInstanceIdentifier (string) --
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
DBInstanceClass (string) --
Contains the name of the compute and memory capacity class of the DB instance.
DbInstancePort (integer) --
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
DbiResourceId (string) --
The Amazon Web Services Region-unique, immutable identifier for the DB instance. This identifier is found in CloudTrail log entries whenever the KMS key for the DB instance is accessed.
DBName (string) --
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
DeletionProtection (boolean) --
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Endpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Engine (string) --
Provides the name of the database engine to use for this DB instance.
EngineVersion (string) --
Indicates the database engine version.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of IAM accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
InstanceCreateTime (string) --
Indicates when the DB instance was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
KmsKeyId (string) --
If StorageEncrypted is true, the KMS key identifier for the encrypted DB instance.
PubliclyAccessible (boolean) --
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
StorageEncrypted (boolean) --
Specifies whether the DB instance is encrypted.
TdeCredentialArn (string) --
The ARN from the key store with which the instance is associated for TDE encryption.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB instance belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
MultiAz (boolean) --
Whether the DB instance is a multiple Availability Zone deployment.
EnhancedMonitoringResourceArn (string) --
The ARN of the CloudWatch Logs log stream that receives the enhanced monitoring metrics data for the DB instance.
DbInstanceStatus (string) --
The current status of the DB instance.
MasterUsername (string) --
The master user name of the DB instance.
AllocatedStorage (integer) --
The amount of storage (in gigabytes) to initially allocate for the DB instance.
PreferredBackupWindow (string) --
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
BackupRetentionPeriod (integer) --
The number of days for which to retain automated backups.
DbSecurityGroups (list) --
A list of the DB security groups to assign to the DB instance.
DbParameterGroups (list) --
A list of the DB parameter groups to assign to the DB instance.
(dict) --
Provides information about a parameter group for a DB instance.
DbParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
AvailabilityZone (string) --
The Availability Zone where the DB instance will be created.
DbSubnetGroup (dict) --
Information about the subnet group that is associated with the DB instance.
DbSubnetGroupName (string) --
The name of the subnet group.
DbSubnetGroupDescription (string) --
The description of the subnet group.
VpcId (string) --
The VPC ID of the subnet group.
SubnetGroupStatus (string) --
The status of the subnet group.
Subnets (list) --
A list of subnets in the subnet group.
(dict) --
Information about a subnet in a subnet group.
SubnetIdentifier (string) --
The identifier of a subnet in the subnet group.
SubnetAvailabilityZone (dict) --
Information about the Availability Zone for a subnet in the subnet group.
Name (string) --
The name of the Availability Zone for a subnet in the subnet group.
SubnetStatus (string) --
The status of a subnet in the subnet group.
DbSubnetGroupArn (string) --
The ARN of the subnet group.
PreferredMaintenanceWindow (string) --
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
PendingModifiedValues (dict) --
Changes to the DB instance that are currently pending.
DbInstanceClass (string) --
The new DB instance class for the DB instance.
AllocatedStorage (integer) --
The new value of the allocated storage for the DB instance.
MasterUserPassword (string) --
The new master user password for the DB instance.
Port (integer) --
The new port for the DB instance.
BackupRetentionPeriod (integer) --
The new backup retention period for the DB instance.
MultiAZ (boolean) --
Indicates that a single Availability Zone DB instance is changing to a multiple Availability Zone deployment.
EngineVersion (string) --
The new engine version for the DB instance.
LicenseModel (string) --
The new license model value for the DB instance.
Iops (integer) --
The new provisioned IOPS value for the DB instance.
DbInstanceIdentifier (string) --
The new DB instance identifier for the DB instance.
StorageType (string) --
The new storage type for the DB instance.
CaCertificateIdentifier (string) --
The new CA certificate identifier for the DB instance.
DbSubnetGroupName (string) --
The name of the new subnet group for the DB instance.
PendingCloudWatchLogsExports (dict) --
A list of log types that are being enabled or disabled.
LogTypesToEnable (list) --
A list of log types that are being enabled.
LogTypesToDisable (list) --
A list of log types that are being disabled.
ProcessorFeatures (list) --
Processor features that are being updated.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
LatestRestorableTime (string) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AutoMinorVersionUpgrade (boolean) --
Indicates whether minor version patches are applied automatically.
ReadReplicaSourceDBInstanceIdentifier (string) --
If this DB instance is a read replica, contains the identifier of the source DB instance.
ReadReplicaDBInstanceIdentifiers (list) --
List of identifiers of the read replicas associated with this DB instance.
ReadReplicaDBClusterIdentifiers (list) --
List of identifiers of Aurora DB clusters to which the RDS DB instance is replicated as a read replica.
LicenseModel (string) --
License model information for this DB instance.
Iops (integer) --
Specifies the provisioned IOPS (I/O operations per second) for this DB instance.
OptionGroupMemberships (list) --
The list of option group memberships for this DB instance.
(dict) --
An option group membership.
OptionGroupName (string) --
The name of the option group.
Status (string) --
The status of the option group membership.
CharacterSetName (string) --
The name of the character set that this DB instance is associated with.
SecondaryAvailabilityZone (string) --
For a DB instance with multi-Availability Zone support, the name of the secondary Availability Zone.
StatusInfos (list) --
The status of a read replica. If the instance isn't a read replica, this is empty.
(dict) --
Information about the status of a read replica.
StatusType (string) --
The type of status. For a read replica, the status type is read replication.
Normal (boolean) --
Whether the read replica instance is operating normally.
Status (string) --
The status of the read replica instance.
Message (string) --
If the read replica is currently in an error state, provides the error details.
StorageType (string) --
The storage type for the DB instance.
DomainMemberships (list) --
The Active Directory domain membership records associated with the DB instance.
(dict) --
Information about an Active Directory domain membership record associated with the DB instance.
Domain (string) --
The identifier of the Active Directory domain.
Status (string) --
The status of the Active Directory Domain membership for the DB instance.
Fqdn (string) --
The fully qualified domain name of the Active Directory domain.
IamRoleName (string) --
The name of the IAM role to use when making API calls to the Directory Service.
CopyTagsToSnapshot (boolean) --
Whether to copy resource tags to snapshots of the DB instance.
MonitoringInterval (integer) --
The interval, in seconds, between points when enhanced monitoring metrics are collected for the DB instance.
MonitoringRoleArn (string) --
The ARN for the IAM role that permits Amazon RDS to send enhanced monitoring metrics to CloudWatch Logs.
PromotionTier (integer) --
The order in which to promote an Aurora replica to the primary instance after a failure of the existing primary instance.
Timezone (string) --
The time zone of the DB instance.
PerformanceInsightsEnabled (boolean) --
Indicates whether Performance Insights is enabled for the DB instance.
PerformanceInsightsKmsKeyId (string) --
The identifier of the KMS key used to encrypt the Performance Insights data.
PerformanceInsightsRetentionPeriod (integer) --
The number of days to retain Performance Insights data.
EnabledCloudWatchLogsExports (list) --
A list of log types that this DB instance is configured to export to CloudWatch Logs.
ProcessorFeatures (list) --
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
ListenerEndpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
MaxAllocatedStorage (integer) --
The upper limit to which Amazon RDS can automatically scale the storage of the DB instance.
AwsSnsTopic (dict) --
Details about an SNS topic.
KmsMasterKeyId (string) --
The ID of an Amazon Web Services managed key for Amazon SNS or a customer managed key.
Subscription (list) --
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
(dict) --
A wrapper type for the attributes of an Amazon SNS subscription.
Endpoint (string) --
The subscription's endpoint (format depends on the protocol).
Protocol (string) --
The subscription's protocol.
TopicName (string) --
The name of the Amazon SNS topic.
Owner (string) --
The subscription's owner.
SqsSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
SqsFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
ApplicationSuccessFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to a platform application endpoint.
FirehoseSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
FirehoseFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
HttpSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
HttpFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
AwsSqsQueue (dict) --
Details about an SQS queue.
KmsDataKeyReusePeriodSeconds (integer) --
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again.
KmsMasterKeyId (string) --
The ID of an Amazon Web Services managed key for Amazon SQS or a custom KMS key.
QueueName (string) --
The name of the new queue.
DeadLetterTargetArn (string) --
The ARN of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
AwsWafWebAcl (dict) --
Details for an WAF web ACL.
Name (string) --
A friendly name or description of the web ACL. You can't change the name of a web ACL after you create it.
DefaultAction (string) --
The action to perform if none of the rules contained in the web ACL match.
Rules (list) --
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
(dict) --
Details for a rule in an WAF web ACL.
Action (dict) --
Specifies the action that CloudFront or WAF takes when a web request matches the conditions in the rule.
Type (string) --
Specifies how you want WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
ALLOW - WAF allows requestsBLOCK - WAF blocks requestsCOUNT - WAF increments a counter of the requests that match all of the conditions in the rule. WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify COUNT for the default action for a web ACL.ExcludedRules (list) --
Rules to exclude from a rule group.
(dict) --
Details about a rule to exclude from a rule group.
RuleId (string) --
The unique identifier for the rule to exclude from the rule group.
OverrideAction (dict) --
Use the OverrideAction to test your RuleGroup .
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup , set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
ActivatedRule|OverrideActionapplies only when updating or adding aRuleGroupto a web ACL. In this case you do not useActivatedRuleAction. For all other update requests,ActivatedRuleActionis used instead ofActivatedRuleOverrideAction.
Type (string) --
COUNToverrides the action specified by the individual rule within aRuleGroup.
If set to NONE , the rule's action takes place.
Priority (integer) --
Specifies the order in which the rules in a web ACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a web ACL, the values do not need to be consecutive.
RuleId (string) --
The identifier for a rule.
Type (string) --
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
WebAclId (string) --
A unique identifier for a web ACL.
AwsRdsDbSnapshot (dict) --
Details about an Amazon RDS database snapshot.
DbSnapshotIdentifier (string) --
The name or ARN of the DB snapshot that is used to restore the DB instance.
DbInstanceIdentifier (string) --
A name for the DB instance.
SnapshotCreateTime (string) --
When the snapshot was taken in Coordinated Universal Time (UTC).
Engine (string) --
The name of the database engine to use for this DB instance.
AllocatedStorage (integer) --
The amount of storage (in gigabytes) to be initially allocated for the database instance.
Status (string) --
The status of this DB snapshot.
Port (integer) --
The port that the database engine was listening on at the time of the snapshot.
AvailabilityZone (string) --
Specifies the name of the Availability Zone in which the DB instance was located at the time of the DB snapshot.
VpcId (string) --
The VPC ID associated with the DB snapshot.
InstanceCreateTime (string) --
Specifies the time in Coordinated Universal Time (UTC) when the DB instance, from which the snapshot was taken, was created.
MasterUsername (string) --
The master user name for the DB snapshot.
EngineVersion (string) --
The version of the database engine.
LicenseModel (string) --
License model information for the restored DB instance.
SnapshotType (string) --
The type of the DB snapshot.
Iops (integer) --
The provisioned IOPS (I/O operations per second) value of the DB instance at the time of the snapshot.
OptionGroupName (string) --
The option group name for the DB snapshot.
PercentProgress (integer) --
The percentage of the estimated data that has been transferred.
SourceRegion (string) --
The Amazon Web Services Region that the DB snapshot was created in or copied from.
SourceDbSnapshotIdentifier (string) --
The DB snapshot ARN that the DB snapshot was copied from.
StorageType (string) --
The storage type associated with the DB snapshot.
TdeCredentialArn (string) --
The ARN from the key store with which to associate the instance for TDE encryption.
Encrypted (boolean) --
Whether the DB snapshot is encrypted.
KmsKeyId (string) --
If Encrypted is true , the KMS key identifier for the encrypted DB snapshot.
Timezone (string) --
The time zone of the DB snapshot.
IamDatabaseAuthenticationEnabled (boolean) --
Whether mapping of IAM accounts to database accounts is enabled.
ProcessorFeatures (list) --
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
DbiResourceId (string) --
The identifier for the source DB instance.
AwsRdsDbClusterSnapshot (dict) --
Details about an Amazon RDS database cluster snapshot.
AvailabilityZones (list) --
A list of Availability Zones where instances in the DB cluster can be created.
SnapshotCreateTime (string) --
Indicates when the snapshot was taken.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Engine (string) --
The name of the database engine that you want to use for this DB instance.
AllocatedStorage (integer) --
Specifies the allocated storage size in gibibytes (GiB).
Status (string) --
The status of this DB cluster snapshot.
Port (integer) --
The port number on which the DB instances in the DB cluster accept connections.
VpcId (string) --
The VPC ID that is associated with the DB cluster snapshot.
ClusterCreateTime (string) --
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
MasterUsername (string) --
The name of the master user for the DB cluster.
EngineVersion (string) --
The version of the database engine to use.
LicenseModel (string) --
The license model information for this DB cluster snapshot.
SnapshotType (string) --
The type of DB cluster snapshot.
PercentProgress (integer) --
Specifies the percentage of the estimated data that has been transferred.
StorageEncrypted (boolean) --
Whether the DB cluster is encrypted.
KmsKeyId (string) --
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
DbClusterIdentifier (string) --
The DB cluster identifier.
DbClusterSnapshotIdentifier (string) --
The identifier of the DB cluster snapshot.
IamDatabaseAuthenticationEnabled (boolean) --
Whether mapping of IAM accounts to database accounts is enabled.
AwsRdsDbCluster (dict) --
Details about an Amazon RDS database cluster.
AllocatedStorage (integer) --
For all database engines except Aurora, specifies the allocated storage size in gibibytes (GiB).
AvailabilityZones (list) --
A list of Availability Zones (AZs) where instances in the DB cluster can be created.
BackupRetentionPeriod (integer) --
The number of days for which automated backups are retained.
DatabaseName (string) --
The name of the database.
Status (string) --
The current status of this DB cluster.
Endpoint (string) --
The connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster.
CustomEndpoints (list) --
A list of custom endpoints for the DB cluster.
MultiAz (boolean) --
Whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
The name of the database engine to use for this DB cluster.
EngineVersion (string) --
The version number of the database engine to use.
Port (integer) --
The port number on which the DB instances in the DB cluster accept connections.
MasterUsername (string) --
The name of the master user for the DB cluster.
PreferredBackupWindow (string) --
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
PreferredMaintenanceWindow (string) --
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
ReadReplicaIdentifiers (list) --
The identifiers of the read replicas that are associated with this DB cluster.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB cluster belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the identifier that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Whether the DB cluster is encrypted.
KmsKeyId (string) --
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
DbClusterResourceId (string) --
The identifier of the DB cluster. The identifier must be unique within each Amazon Web Services Region and is immutable.
AssociatedRoles (list) --
A list of the IAM roles that are associated with the DB cluster.
(dict) --
An IAM role that is associated with the Amazon RDS DB cluster.
RoleArn (string) --
The ARN of the IAM role.
Status (string) --
The status of the association between the IAM role and the DB cluster.
ClusterCreateTime (string) --
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
EnabledCloudWatchLogsExports (list) --
A list of log types that this DB cluster is configured to export to CloudWatch Logs.
EngineMode (string) --
The database engine mode of the DB cluster.
DeletionProtection (boolean) --
Whether the DB cluster has deletion protection enabled.
HttpEndpointEnabled (boolean) --
Whether the HTTP endpoint for an Aurora Serverless DB cluster is enabled.
ActivityStreamStatus (string) --
The status of the database activity stream.
CopyTagsToSnapshot (boolean) --
Whether tags are copied from the DB cluster to snapshots of the DB cluster.
CrossAccountClone (boolean) --
Whether the DB cluster is a clone of a DB cluster owned by a different Amazon Web Services account.
DomainMemberships (list) --
The Active Directory domain membership records that are associated with the DB cluster.
(dict) --
Information about an Active Directory domain membership record associated with the DB instance.
Domain (string) --
The identifier of the Active Directory domain.
Status (string) --
The status of the Active Directory Domain membership for the DB instance.
Fqdn (string) --
The fully qualified domain name of the Active Directory domain.
IamRoleName (string) --
The name of the IAM role to use when making API calls to the Directory Service.
DbClusterParameterGroup (string) --
The name of the DB cluster parameter group for the DB cluster.
DbSubnetGroup (string) --
The subnet group that is associated with the DB cluster, including the name, description, and subnets in the subnet group.
DbClusterOptionGroupMemberships (list) --
The list of option group memberships for this DB cluster.
(dict) --
Information about an option group membership for a DB cluster.
DbClusterOptionGroupName (string) --
The name of the DB cluster option group.
Status (string) --
The status of the DB cluster option group.
DbClusterIdentifier (string) --
The DB cluster identifier that the user assigned to the cluster. This identifier is the unique key that identifies a DB cluster.
DbClusterMembers (list) --
The list of instances that make up the DB cluster.
(dict) --
Information about an instance in the DB cluster.
IsClusterWriter (boolean) --
Whether the cluster member is the primary instance for the DB cluster.
PromotionTier (integer) --
Specifies the order in which an Aurora replica is promoted to the primary instance when the existing primary instance fails.
DbInstanceIdentifier (string) --
The instance identifier for this member of the DB cluster.
DbClusterParameterGroupStatus (string) --
The status of the DB cluster parameter group for this member of the DB cluster.
IamDatabaseAuthenticationEnabled (boolean) --
Whether the mapping of IAM accounts to database accounts is enabled.
AwsEcsCluster (dict) --
Details about an Amazon ECS cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that identifies the cluster.
ActiveServicesCount (integer) --
The number of services that are running on the cluster in an ACTIVE state. You can view these services with the Amazon ECS ` ListServices https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html`__ API operation.
CapacityProviders (list) --
The short name of one or more capacity providers to associate with the cluster.
ClusterSettings (list) --
The setting to use to create the cluster. Specifically used to configure whether to enable CloudWatch Container Insights for the cluster.
(dict) --
Indicates whether to enable CloudWatch Container Insights for the ECS cluster.
Name (string) --
The name of the setting.
Value (string) --
The value of the setting.
Configuration (dict) --
The run command configuration for the cluster.
ExecuteCommandConfiguration (dict) --
Contains the run command configuration for the cluster.
KmsKeyId (string) --
The identifier of the KMS key that is used to encrypt the data between the local client and the container.
LogConfiguration (dict) --
The log configuration for the results of the run command actions. Required if Logging is NONE .
CloudWatchEncryptionEnabled (boolean) --
Whether to enable encryption on the CloudWatch logs.
CloudWatchLogGroupName (string) --
The name of the CloudWatch log group to send the logs to.
S3BucketName (string) --
The name of the S3 bucket to send logs to.
S3EncryptionEnabled (boolean) --
Whether to encrypt the logs that are sent to the S3 bucket.
S3KeyPrefix (string) --
Identifies the folder in the S3 bucket to send the logs to.
Logging (string) --
The log setting to use for redirecting logs for run command results.
DefaultCapacityProviderStrategy (list) --
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
(dict) --
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
Base (integer) --
The minimum number of tasks to run on the specified capacity provider.
CapacityProvider (string) --
The name of the capacity provider.
Weight (integer) --
The relative percentage of the total number of tasks launched that should use the capacity provider.
ClusterName (string) --
A name that you use to identify your cluster.
RegisteredContainerInstancesCount (integer) --
The number of container instances registered into the cluster. This includes container instances in both ACTIVE and DRAINING status.
RunningTasksCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
Status (string) --
The status of the cluster.
AwsEcsContainer (dict) --
Provides information about a Docker container that's part of a task.
Name (string) --
The name of the container.
Image (string) --
The image used for the container.
MountPoints (list) --
The mount points for data volumes in your container.
(dict) --
Details for a volume mount point that's used in a container definition.
SourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
ContainerPath (string) --
The path on the container to mount the host volume at.
Privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
AwsEcsTaskDefinition (dict) --
Details about a task definition. A task definition describes the container and volume definitions of an Amazon Elastic Container Service task.
ContainerDefinitions (list) --
The container definitions that describe the containers that make up the task.
(dict) --
A container definition that describes a container in the task.
Command (list) --
The command that is passed to the container.
Cpu (integer) --
The number of CPU units reserved for the container.
DependsOn (list) --
The dependencies that are defined for container startup and shutdown.
(dict) --
A dependency that is defined for container startup and shutdown.
Condition (string) --
The dependency condition of the dependent container. Indicates the required status of the dependent container before the current container can start.
ContainerName (string) --
The name of the dependent container.
DisableNetworking (boolean) --
Whether to disable networking within the container.
DnsSearchDomains (list) --
A list of DNS search domains that are presented to the container.
DnsServers (list) --
A list of DNS servers that are presented to the container.
DockerLabels (dict) --
A key-value map of labels to add to the container.
DockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems.
EntryPoint (list) --
The entry point that is passed to the container.
Environment (list) --
The environment variables to pass to a container.
(dict) --
An environment variable to pass to the container.
Name (string) --
The name of the environment variable.
Value (string) --
The value of the environment variable.
EnvironmentFiles (list) --
A list of files containing the environment variables to pass to a container.
(dict) --
A file that contain environment variables to pass to a container.
Type (string) --
The type of environment file.
Value (string) --
The ARN of the S3 object that contains the environment variable file.
Essential (boolean) --
Whether the container is essential. All tasks must have at least one essential container.
ExtraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container.
(dict) --
A hostname and IP address mapping to append to the /etc/hosts file on the container.
Hostname (string) --
The hostname to use in the /etc/hosts entry.
IpAddress (string) --
The IP address to use in the /etc/hosts entry.
FirelensConfiguration (dict) --
The FireLens configuration for the container. Specifies and configures a log router for container logs.
Options (dict) --
The options to use to configure the log router.
The valid option keys are as follows:
enable-ecs-log-metadata . The value can be true or false .config-file-type . The value can be s3 or file .config-file-value . The value is either an S3 ARN or a file path.Type (string) --
The log router to use.
HealthCheck (dict) --
The container health check command and associated configuration parameters for the container.
Command (list) --
The command that the container runs to determine whether it is healthy.
Interval (integer) --
The time period in seconds between each health check execution. The default value is 30 seconds.
Retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. The default value is 3.
StartPeriod (integer) --
The optional grace period in seconds that allows containers time to bootstrap before failed health checks count towards the maximum number of retries.
Timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. The default value is 5.
Hostname (string) --
The hostname to use for the container.
Image (string) --
The image used to start the container.
Interactive (boolean) --
If set to true, then containerized applications can be deployed that require stdin or a tty to be allocated.
Links (list) --
A list of links for the container in the form `` container_name :alias `` . Allows containers to communicate with each other without the need for port mappings.
LinuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities.
Capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Add (list) --
The Linux capabilities for the container that are added to the default configuration provided by Docker.
Drop (list) --
The Linux capabilities for the container that are dropped from the default configuration provided by Docker.
Devices (list) --
The host devices to expose to the container.
(dict) --
A host device to expose to the container.
ContainerPath (string) --
The path inside the container at which to expose the host device.
HostPath (string) --
The path for the device on the host container instance.
Permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read, write, and mknod for the device.
InitProcessEnabled (boolean) --
Whether to run an init process inside the container that forwards signals and reaps processes.
MaxSwap (integer) --
The total amount of swap memory (in MiB) that a container can use.
SharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume.
Swappiness (integer) --
Configures the container's memory swappiness behavior. Determines how aggressively pages are swapped. The higher the value, the more aggressive the swappiness. The default is 60.
Tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount.
(dict) --
The container path, mount options, and size (in MiB) of a tmpfs mount.
ContainerPath (string) --
The absolute file path where the tmpfs volume is to be mounted.
MountOptions (list) --
The list of tmpfs volume mount options.
Size (integer) --
The maximum size (in MiB) of the tmpfs volume.
LogConfiguration (dict) --
The log configuration specification for the container.
LogDriver (string) --
The log driver to use for the container.
Options (dict) --
The configuration options to send to the log driver. Requires version 1.19 of the Docker Remote API or greater on your container instance.
SecretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
A secret to pass to the log configuration.
Name (string) --
The name of the secret.
ValueFrom (string) --
The secret to expose to the container.
The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
Memory (integer) --
The amount (in MiB) of memory to present to the container. If the container attempts to exceed the memory specified here, the container is shut down. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified.
MemoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container.
MountPoints (list) --
The mount points for the data volumes in the container.
(dict) --
A mount point for the data volumes in the container.
ContainerPath (string) --
The path on the container to mount the host volume at.
ReadOnly (boolean) --
Whether the container has read-only access to the volume.
SourceVolume (string) --
The name of the volume to mount. Must match the name of a volume listed in VolumeDetails for the task definition.
Name (string) --
The name of the container.
PortMappings (list) --
The list of port mappings for the container.
(dict) --
A port mapping for the container.
ContainerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
HostPort (integer) --
The port number on the container instance to reserve for the container.
Protocol (string) --
The protocol used for the port mapping. The default is tcp .
Privileged (boolean) --
Whether the container is given elevated privileges on the host container instance. The elevated privileges are similar to the root user.
PseudoTerminal (boolean) --
Whether to allocate a TTY to the container.
ReadonlyRootFilesystem (boolean) --
Whether the container is given read-only access to its root file system.
RepositoryCredentials (dict) --
The private repository authentication credentials to use.
CredentialsParameter (string) --
The ARN of the secret that contains the private repository credentials.
ResourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
A resource to assign to a container.
Type (string) --
The type of resource to assign to a container.
Value (string) --
The value for the specified resource type.
For GPU , the value is the number of physical GPUs the Amazon ECS container agent reserves for the container.
For InferenceAccelerator , the value should match the DeviceName attribute of an entry in InferenceAccelerators .
Secrets (list) --
The secrets to pass to the container.
(dict) --
A secret to pass to the container.
Name (string) --
The name of the secret.
ValueFrom (string) --
The secret to expose to the container. The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
StartTimeout (integer) --
The number of seconds to wait before giving up on resolving dependencies for a container.
StopTimeout (integer) --
The number of seconds to wait before the container is stopped if it doesn't shut down normally on its own.
SystemControls (list) --
A list of namespaced kernel parameters to set in the container.
(dict) --
A namespaced kernel parameter to set in the container.
Namespace (string) --
The namespaced kernel parameter for which to set a value.
Value (string) --
The value of the parameter.
Ulimits (list) --
A list of ulimits to set in the container.
(dict) --
A ulimit to set in the container.
HardLimit (integer) --
The hard limit for the ulimit type.
Name (string) --
The type of the ulimit.
SoftLimit (integer) --
The soft limit for the ulimit type.
User (string) --
The user to use inside the container.
The value can use one of the following formats.
VolumesFrom (list) --
Data volumes to mount from another container.
(dict) --
A data volume to mount from another container.
ReadOnly (boolean) --
Whether the container has read-only access to the volume.
SourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
WorkingDirectory (string) --
The working directory in which to run commands inside the container.
Cpu (string) --
The number of CPU units used by the task.
ExecutionRoleArn (string) --
The ARN of the task execution role that grants the container agent permission to make API calls on behalf of the container user.
Family (string) --
The name of a family that this task definition is registered to.
InferenceAccelerators (list) --
The Elastic Inference accelerators to use for the containers in the task.
(dict) --
An Elastic Inference accelerator to use for the containers in the task.
DeviceName (string) --
The Elastic Inference accelerator device name.
DeviceType (string) --
The Elastic Inference accelerator type to use.
IpcMode (string) --
The IPC resource namespace to use for the containers in the task.
Memory (string) --
The amount (in MiB) of memory used by the task.
NetworkMode (string) --
The Docker networking mode to use for the containers in the task.
PidMode (string) --
The process namespace to use for the containers in the task.
PlacementConstraints (list) --
The placement constraint objects to use for tasks.
(dict) --
A placement constraint object to use for tasks.
Expression (string) --
A cluster query language expression to apply to the constraint.
Type (string) --
The type of constraint.
ProxyConfiguration (dict) --
The configuration details for the App Mesh proxy.
ContainerName (string) --
The name of the container that will serve as the App Mesh proxy.
ProxyConfigurationProperties (list) --
The set of network configuration parameters to provide to the Container Network Interface (CNI) plugin, specified as key-value pairs.
(dict) --
A network configuration parameter to provide to the Container Network Interface (CNI) plugin.
Name (string) --
The name of the property.
Value (string) --
The value of the property.
Type (string) --
The proxy type.
RequiresCompatibilities (list) --
The task launch types that the task definition was validated against.
TaskRoleArn (string) --
The short name or ARN of the IAM role that grants containers in the task permission to call Amazon Web Services API operations on your behalf.
Volumes (list) --
The data volume definitions for the task.
(dict) --
A data volume to mount from another container.
DockerVolumeConfiguration (dict) --
Information about a Docker volume.
Autoprovision (boolean) --
Whether to create the Docker volume automatically if it does not already exist.
Driver (string) --
The Docker volume driver to use.
DriverOpts (dict) --
A map of Docker driver-specific options that are passed through.
Labels (dict) --
Custom metadata to add to the Docker volume.
Scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are provisioned automatically when the task starts and destroyed when the task stops. Docker volumes that are shared persist after the task stops.
EfsVolumeConfiguration (dict) --
Information about the Amazon Elastic File System file system that is used for task storage.
AuthorizationConfig (dict) --
The authorization configuration details for the Amazon EFS file system.
AccessPointId (string) --
The Amazon EFS access point identifier to use.
Iam (string) --
Whether to use the Amazon ECS task IAM role defined in a task definition when mounting the Amazon EFS file system.
FilesystemId (string) --
The Amazon EFS file system identifier to use.
RootDirectory (string) --
The directory within the Amazon EFS file system to mount as the root directory inside the host.
TransitEncryption (string) --
Whether to enable encryption for Amazon EFS data in transit between the Amazon ECS host and the Amazon EFS server.
TransitEncryptionPort (integer) --
The port to use when sending encrypted data between the Amazon ECS host and the Amazon EFS server.
Host (dict) --
Information about a bind mount host volume.
SourcePath (string) --
The path on the host container instance that is presented to the container.
Name (string) --
The name of the data volume.
Container (dict) --
Details about a container resource related to a finding.
ContainerRuntime (string) --
The runtime of the container.
Name (string) --
The name of the container related to a finding.
ImageId (string) --
The identifier of the container image related to a finding.
ImageName (string) --
The name of the container image related to a finding.
LaunchedAt (string) --
Indicates when the container started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
VolumeMounts (list) --
Provides information about the mounting of a volume in a container.
(dict) --
Describes the mounting of a volume in a container.
Name (string) --
The name of the volume.
MountPath (string) --
The path in the container at which the volume should be mounted.
Privileged (boolean) --
When this parameter is true , the container is given elevated privileges on the host container instance (similar to the root user).
Other (dict) --
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
Other object to populate the fields that are missing from the type-specific object.Other .AwsRdsEventSubscription (dict) --
Details about an RDS event notification subscription.
CustSubscriptionId (string) --
The identifier of the account that is associated with the event notification subscription.
CustomerAwsId (string) --
The identifier of the event notification subscription.
Enabled (boolean) --
Whether the event notification subscription is enabled.
EventCategoriesList (list) --
The list of event categories for the event notification subscription.
EventSubscriptionArn (string) --
The ARN of the event notification subscription.
SnsTopicArn (string) --
The ARN of the SNS topic to post the event notifications to.
SourceIdsList (list) --
A list of source identifiers for the event notification subscription.
SourceType (string) --
The source type for the event notification subscription.
Status (string) --
The status of the event notification subscription.
Valid values: creating | modifying | deleting | active | no-permission | topic-not-exist
SubscriptionCreationTime (string) --
The datetime when the event notification subscription was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsEcsService (dict) --
Details about a service within an ECS cluster.
CapacityProviderStrategy (list) --
The capacity provider strategy that the service uses.
(dict) --
Strategy item for the capacity provider strategy that the service uses.
Base (integer) --
The minimum number of tasks to run on the capacity provider. Only one strategy item can specify a value for Base .
The value must be between 0 and 100000.
CapacityProvider (string) --
The short name of the capacity provider.
Weight (integer) --
The relative percentage of the total number of tasks that should use the capacity provider.
If no weight is specified, the default value is 0. At least one capacity provider must have a weight greater than 0.
The value can be between 0 and 1000.
Cluster (string) --
The ARN of the cluster that hosts the service.
DeploymentConfiguration (dict) --
Deployment parameters for the service. Includes the number of tasks that run and the order in which to start and stop tasks.
DeploymentCircuitBreaker (dict) --
Determines whether a service deployment fails if a service cannot reach a steady state.
Enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
Rollback (boolean) --
Whether to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
MaximumPercent (integer) --
For a service that uses the rolling update (ECS ) deployment type, the maximum number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, and for tasks that use the EC2 launch type, when any container instances are in the DRAINING state. Provided as a percentage of the desired number of tasks. The default value is 200%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types, and tasks that use the EC2 launch type, the maximum number of tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the maximum percent value is not used.
MinimumHealthyPercent (integer) --
For a service that uses the rolling update (ECS ) deployment type, the minimum number of tasks in a service that must remain in the RUNNING state during a deployment, and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Expressed as a percentage of the desired number of tasks. The default value is 100%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the minimum healthy percent value is not used.
DeploymentController (dict) --
Contains the deployment controller type that the service uses.
Type (string) --
The rolling update (ECS ) deployment type replaces the current running version of the container with the latest version.
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model that is powered by CodeDeploy. This deployment model a new deployment of a service can be verified before production traffic is sent to it.
The external (EXTERNAL ) deployment type allows the use of any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
Valid values: ECS | CODE_DEPLOY | EXTERNAL
DesiredCount (integer) --
The number of instantiations of the task definition to run on the service.
EnableEcsManagedTags (boolean) --
Whether to enable Amazon ECS managed tags for the tasks in the service.
EnableExecuteCommand (boolean) --
Whether the execute command functionality is enabled for the service.
HealthCheckGracePeriodSeconds (integer) --
After a task starts, the amount of time in seconds that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks.
LaunchType (string) --
The launch type that the service uses.
Valid values: EC2 | FARGATE | EXTERNAL
LoadBalancers (list) --
Information about the load balancers that the service uses.
(dict) --
Information about a load balancer that the service uses.
ContainerName (string) --
The name of the container to associate with the load balancer.
ContainerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
LoadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
Only specified when using a Classic Load Balancer. For an Application Load Balancer or a Network Load Balancer, the load balancer name is omitted.
TargetGroupArn (string) --
The ARN of the Elastic Load Balancing target group or groups associated with a service or task set.
Only specified when using an Application Load Balancer or a Network Load Balancer. For a Classic Load Balancer, the target group ARN is omitted.
Name (string) --
The name of the service.
NetworkConfiguration (dict) --
For tasks that use the awsvpc networking mode, the VPC subnet and security group configuration.
AwsVpcConfiguration (dict) --
The VPC subnet and security group configuration.
AssignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
Valid values: ENABLED | DISABLED
SecurityGroups (list) --
The IDs of the security groups associated with the task or service.
You can provide up to five security groups.
Subnets (list) --
The IDs of the subnets associated with the task or service.
You can provide up to 16 subnets.
PlacementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
A placement constraint for the tasks in the service.
Expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance .
Type (string) --
The type of constraint. Use distinctInstance to run each task in a particular group on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
Valid values: distinctInstance | memberOf
PlacementStrategies (list) --
Information about how tasks for the service are placed.
(dict) --
A placement strategy that determines how to place the tasks for the service.
Field (string) --
The field to apply the placement strategy against.
For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone .
For the binpack placement strategy, valid values are cpu and memory .
For the random placement strategy, this attribute is not used.
Type (string) --
The type of placement strategy.
The random placement strategy randomly places tasks on available candidates.
The spread placement strategy spreads placement across available candidates evenly based on the value of Field .
The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified in Field .
Valid values: random | spread | binpack
PlatformVersion (string) --
The platform version on which to run the service. Only specified for tasks that are hosted on Fargate. If a platform version is not specified, the LATEST platform version is used by default.
PropagateTags (string) --
Indicates whether to propagate the tags from the task definition to the task or from the service to the task. If no value is provided, then tags are not propagated.
Valid values: TASK_DEFINITION | SERVICE
Role (string) --
The ARN of the IAM role that is associated with the service. The role allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
SchedulingStrategy (string) --
The scheduling strategy to use for the service.
The REPLICA scheduling strategy places and maintains the desired number of tasks across the cluster. By default, the service scheduler spreads tasks across Availability Zones. Task placement strategies and constraints are used to customize task placement decisions.
The DAEMON scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that are specified in the cluster. The service scheduler also evaluates the task placement constraints for running tasks and stops tasks that do not meet the placement constraints.
Valid values: REPLICA | DAEMON
ServiceArn (string) --
The ARN of the service.
ServiceName (string) --
The name of the service.
The name can contain up to 255 characters. It can use letters, numbers, underscores, and hyphens.
ServiceRegistries (list) --
Information about the service discovery registries to assign to the service.
(dict) --
Information about a service discovery registry to assign to the service.
ContainerName (string) --
The container name value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
ContainerPort (integer) --
The port value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
Port (integer) --
The port value to use for a service discovery service that specifies an SRV record. This field can be used if both the awsvpc awsvpc network mode and SRV records are used.
RegistryArn (string) --
The ARN of the service registry.
TaskDefinition (string) --
The task definition to use for tasks in the service.
AwsAutoScalingLaunchConfiguration (dict) --
Provides details about a launch configuration.
AssociatePublicIpAddress (boolean) --
For Auto Scaling groups that run in a VPC, specifies whether to assign a public IP address to the group's instances.
BlockDeviceMappings (list) --
Specifies the block devices for the instance.
(dict) --
A block device for the instance.
DeviceName (string) --
The device name that is exposed to the EC2 instance. For example, /dev/sdh or xvdh .
Ebs (dict) --
Parameters that are used to automatically set up Amazon EBS volumes when an instance is launched.
DeleteOnTermination (boolean) --
Whether to delete the volume when the instance is terminated.
Encrypted (boolean) --
Whether to encrypt the volume.
Iops (integer) --
The number of input/output (I/O) operations per second (IOPS) to provision for the volume.
Only supported for gp3 or io1 volumes. Required for io1 volumes. Not used with standard , gp2 , st1 , or sc1 volumes.
SnapshotId (string) --
The snapshot ID of the volume to use.
You must specify either VolumeSize or SnapshotId .
VolumeSize (integer) --
The volume size, in GiBs. The following are the supported volumes sizes for each volume type:
You must specify either SnapshotId or VolumeSize . If you specify both SnapshotId and VolumeSize , the volume size must be equal or greater than the size of the snapshot.
VolumeType (string) --
The volume type.
NoDevice (boolean) --
Whether to suppress the device that is included in the block device mapping of the Amazon Machine Image (AMI).
If NoDevice is true , then you cannot specify Ebs .>
VirtualName (string) --
The name of the virtual device (for example, ephemeral0 ).
You can provide either VirtualName or Ebs , but not both.
ClassicLinkVpcId (string) --
The identifier of a ClassicLink-enabled VPC that EC2-Classic instances are linked to.
ClassicLinkVpcSecurityGroups (list) --
The identifiers of one or more security groups for the VPC that is specified in ClassicLinkVPCId .
CreatedTime (string) --
The creation date and time for the launch configuration.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
EbsOptimized (boolean) --
Whether the launch configuration is optimized for Amazon EBS I/O.
IamInstanceProfile (string) --
The name or the ARN of the instance profile associated with the IAM role for the instance. The instance profile contains the IAM role.
ImageId (string) --
The identifier of the Amazon Machine Image (AMI) that is used to launch EC2 instances.
InstanceMonitoring (dict) --
Indicates the type of monitoring for instances in the group.
Enabled (boolean) --
If set to true , then instances in the group launch with detailed monitoring.
If set to false , then instances in the group launch with basic monitoring.
InstanceType (string) --
The instance type for the instances.
KernelId (string) --
The identifier of the kernel associated with the AMI.
KeyName (string) --
The name of the key pair.
LaunchConfigurationName (string) --
The name of the launch configuration.
PlacementTenancy (string) --
The tenancy of the instance. An instance with dedicated tenancy runs on isolated, single-tenant hardware and can only be launched into a VPC.
RamdiskId (string) --
The identifier of the RAM disk associated with the AMI.
SecurityGroups (list) --
The security groups to assign to the instances in the Auto Scaling group.
SpotPrice (string) --
The maximum hourly price to be paid for any Spot Instance that is launched to fulfill the request.
UserData (string) --
The user data to make available to the launched EC2 instances. Must be base64-encoded text.
MetadataOptions (dict) --
The metadata options for the instances.
HttpEndpoint (string) --
Enables or disables the HTTP metadata endpoint on your instances. By default, the metadata endpoint is enabled.
HttpPutResponseHopLimit (integer) --
The HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
HttpTokens (string) --
Indicates whether token usage is required or optional for metadata requests. By default, token usage is optional .
AwsEc2VpnConnection (dict) --
Details about an Amazon EC2 VPN connection.
VpnConnectionId (string) --
The identifier of the VPN connection.
State (string) --
The current state of the VPN connection.
CustomerGatewayId (string) --
The identifier of the customer gateway that is at your end of the VPN connection.
CustomerGatewayConfiguration (string) --
The configuration information for the VPN connection's customer gateway, in the native XML format.
Type (string) --
The type of VPN connection.
VpnGatewayId (string) --
The identifier of the virtual private gateway that is at the Amazon Web Services side of the VPN connection.
Category (string) --
The category of the VPN connection. VPN indicates an Amazon Web Services VPN connection. VPN-Classic indicates an Amazon Web Services Classic VPN connection.
VgwTelemetry (list) --
Information about the VPN tunnel.
(dict) --
Information about the VPN tunnel.
AcceptedRouteCount (integer) --
The number of accepted routes.
CertificateArn (string) --
The ARN of the VPN tunnel endpoint certificate.
LastStatusChange (string) --
The date and time of the last change in status.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
OutsideIpAddress (string) --
The Internet-routable IP address of the virtual private gateway's outside interface.
Status (string) --
The status of the VPN tunnel.
StatusMessage (string) --
If an error occurs, a description of the error.
Options (dict) --
The VPN connection options.
StaticRoutesOnly (boolean) --
Whether the VPN connection uses static routes only.
TunnelOptions (list) --
The VPN tunnel options.
(dict) --
The VPN tunnel options.
DpdTimeoutSeconds (integer) --
The number of seconds after which a Dead Peer Detection (DPD) timeout occurs.
IkeVersions (list) --
The Internet Key Exchange (IKE) versions that are permitted for the VPN tunnel.
OutsideIpAddress (string) --
The external IP address of the VPN tunnel.
Phase1DhGroupNumbers (list) --
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.
Phase1EncryptionAlgorithms (list) --
The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.
Phase1IntegrityAlgorithms (list) --
The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.
Phase1LifetimeSeconds (integer) --
The lifetime for phase 1 of the IKE negotiation, in seconds.
Phase2DhGroupNumbers (list) --
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.
Phase2EncryptionAlgorithms (list) --
The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.
Phase2IntegrityAlgorithms (list) --
The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.
Phase2LifetimeSeconds (integer) --
The lifetime for phase 2 of the IKE negotiation, in seconds.
PreSharedKey (string) --
The preshared key to establish initial authentication between the virtual private gateway and the customer gateway.
RekeyFuzzPercentage (integer) --
The percentage of the rekey window, which is determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.
RekeyMarginTimeSeconds (integer) --
The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.
ReplayWindowSize (integer) --
The number of packets in an IKE replay window.
TunnelInsideCidr (string) --
The range of inside IPv4 addresses for the tunnel.
Routes (list) --
The static routes that are associated with the VPN connection.
(dict) --
A static routes associated with the VPN connection.
DestinationCidrBlock (string) --
The CIDR block associated with the local subnet of the customer data center.
State (string) --
The current state of the static route.
TransitGatewayId (string) --
The identifier of the transit gateway that is associated with the VPN connection.
AwsEcrContainerImage (dict) --
Information about an Amazon ECR image.
RegistryId (string) --
The Amazon Web Services account identifier that is associated with the registry that the image belongs to.
RepositoryName (string) --
The name of the repository that the image belongs to.
Architecture (string) --
The architecture of the image.
ImageDigest (string) --
The sha256 digest of the image manifest.
ImageTags (list) --
The list of tags that are associated with the image.
ImagePublishedAt (string) --
The date and time when the image was pushed to the repository.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsOpenSearchServiceDomain (dict) --
Details about an Amazon OpenSearch Service domain.
Arn (string) --
The ARN of the OpenSearch Service domain.
AccessPolicies (string) --
IAM policy document that specifies the access policies for the OpenSearch Service domain.
DomainName (string) --
The name of the endpoint.
Id (string) --
The identifier of the domain.
DomainEndpoint (string) --
The domain endpoint.
EngineVersion (string) --
The version of the domain engine.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
ServiceSoftwareOptions (dict) --
Information about the status of a domain relative to the latest service software.
AutomatedUpdateDate (string) --
The epoch time when the deployment window closes for required updates. After this time, OpenSearch Service schedules the software upgrade automatically.
Cancellable (boolean) --
Whether a request to update the domain can be canceled.
CurrentVersion (string) --
The version of the service software that is currently installed on the domain.
Description (string) --
A more detailed description of the service software status.
NewVersion (string) --
The most recent version of the service software.
UpdateAvailable (boolean) --
Whether a service software update is available for the domain.
UpdateStatus (string) --
The status of the service software update.
OptionalDeployment (boolean) --
Whether the service software update is optional.
ClusterConfig (dict) --
Details about the configuration of an OpenSearch cluster.
InstanceCount (integer) --
The number of data nodes to use in the OpenSearch domain.
WarmEnabled (boolean) --
Whether UltraWarm is enabled.
WarmCount (integer) --
The number of UltraWarm instances.
DedicatedMasterEnabled (boolean) --
Whether to use a dedicated master node for the OpenSearch domain. A dedicated master node performs cluster management tasks, but does not hold data or respond to data upload requests.
ZoneAwarenessConfig (dict) --
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
AvailabilityZoneCount (integer) --
The number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
DedicatedMasterCount (integer) --
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
InstanceType (string) --
The instance type for your data nodes.
WarmType (string) --
The type of UltraWarm instance.
ZoneAwarenessEnabled (boolean) --
Whether to enable zone awareness for the OpenSearch domain. When zone awareness is enabled, OpenSearch Service allocates the cluster's nodes and replica index shards across Availability Zones (AZs) in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
DedicatedMasterType (string) --
The hardware configuration of the computer that hosts the dedicated master node.
If this attribute is specified, then DedicatedMasterEnabled must be true .
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
CustomEndpointCertificateArn (string) --
The ARN for the security certificate. The certificate is managed in ACM.
CustomEndpointEnabled (boolean) --
Whether to enable a custom endpoint for the domain.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
CustomEndpoint (string) --
The fully qualified URL for the custom endpoint.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
VpcOptions (dict) --
Information that OpenSearch Service derives based on VPCOptions for the domain.
SecurityGroupIds (list) --
The list of security group IDs that are associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs that are associated with the VPC endpoints for the domain.
LogPublishingOptions (dict) --
Configures the CloudWatch Logs to publish for the OpenSearch domain.
IndexSlowLogs (dict) --
Configures the OpenSearch index logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
SearchSlowLogs (dict) --
Configures the OpenSearch search slow log publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
AuditLogs (dict) --
Configures the OpenSearch audit logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
DomainEndpoints (dict) --
The domain endpoints. Used if the OpenSearch domain resides in a VPC.
This is a map of key-value pairs. The key is always vpc . The value is the endpoint.
AdvancedSecurityOptions (dict) --
Specifies options for fine-grained access control.
Enabled (boolean) --
Enables fine-grained access control.
InternalUserDatabaseEnabled (boolean) --
Enables the internal user database.
MasterUserOptions (dict) --
Specifies information about the master user of the domain.
MasterUserArn (string) --
The Amazon Resource Name (ARN) for the master user.
MasterUserName (string) --
The username for the master user.
MasterUserPassword (string) --
The password for the master user.
AwsEc2VpcEndpointService (dict) --
Details about the service configuration for a VPC endpoint service.
AcceptanceRequired (boolean) --
Whether requests from other Amazon Web Services accounts to create an endpoint to the service must first be accepted.
AvailabilityZones (list) --
The Availability Zones where the service is available.
BaseEndpointDnsNames (list) --
The DNS names for the service.
ManagesVpcEndpoints (boolean) --
Whether the service manages its VPC endpoints.
GatewayLoadBalancerArns (list) --
The ARNs of the Gateway Load Balancers for the service.
NetworkLoadBalancerArns (list) --
The ARNs of the Network Load Balancers for the service.
PrivateDnsName (string) --
The private DNS name for the service.
ServiceId (string) --
The identifier of the service.
ServiceName (string) --
The name of the service.
ServiceState (string) --
The current state of the service.
ServiceType (list) --
The types for the service.
(dict) --
The service type information for a VPC endpoint service.
ServiceType (string) --
The type of service.
AwsXrayEncryptionConfig (dict) --
Information about the encryption configuration for X-Ray.
KeyId (string) --
The identifier of the KMS key that is used for encryption. Provided if Type is KMS .
Status (string) --
The current status of the encryption configuration. When Status is UPDATING , X-Ray might use both the old and new encryption.
Type (string) --
The type of encryption. KMS indicates that the encryption uses KMS keys. NONE indicates to use the default encryption.
AwsWafRateBasedRule (dict) --
Details about a rate-based rule for global resources.
MetricName (string) --
The name of the metrics for the rate-based rule.
Name (string) --
The name of the rate-based rule.
RateKey (string) --
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
RateLimit (integer) --
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
RuleId (string) --
The unique identifier for the rate-based rule.
MatchPredicates (list) --
The predicates to include in the rate-based rule.
(dict) --
A match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
DataId (string) --
The unique identifier for the predicate.
Negated (boolean) --
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
Type (string) --
The type of predicate.
AwsWafRegionalRateBasedRule (dict) --
Details about a rate-based rule for Regional resources.
MetricName (string) --
The name of the metrics for the rate-based rule.
Name (string) --
The name of the rate-based rule.
RateKey (string) --
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
RateLimit (integer) --
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
RuleId (string) --
The unique identifier for the rate-based rule.
MatchPredicates (list) --
The predicates to include in the rate-based rule.
(dict) --
Details for a match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
DataId (string) --
The unique identifier for the predicate.
Negated (boolean) --
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
Type (string) --
The type of predicate.
AwsEcrRepository (dict) --
Information about an Amazon Elastic Container Registry repository.
Arn (string) --
The ARN of the repository.
ImageScanningConfiguration (dict) --
The image scanning configuration for a repository.
ScanOnPush (boolean) --
Whether to scan images after they are pushed to a repository.
ImageTagMutability (string) --
The tag mutability setting for the repository.
LifecyclePolicy (dict) --
Information about the lifecycle policy for the repository.
LifecyclePolicyText (string) --
The text of the lifecycle policy.
RegistryId (string) --
The Amazon Web Services account identifier that is associated with the registry that contains the repository.
RepositoryName (string) --
The name of the repository.
RepositoryPolicyText (string) --
The text of the repository policy.
AwsEksCluster (dict) --
Details about an Amazon EKS cluster.
Arn (string) --
The ARN of the cluster.
CertificateAuthorityData (string) --
The certificate authority data for the cluster.
ClusterStatus (string) --
The status of the cluster.
Endpoint (string) --
The endpoint for the Amazon EKS API server.
Name (string) --
The name of the cluster.
ResourcesVpcConfig (dict) --
The VPC configuration used by the cluster control plane.
SecurityGroupIds (list) --
The security groups that are associated with the cross-account elastic network interfaces that are used to allow communication between your nodes and the Amazon EKS control plane.
SubnetIds (list) --
The subnets that are associated with the cluster.
RoleArn (string) --
The ARN of the IAM role that provides permissions for the Amazon EKS control plane to make calls to Amazon Web Services API operations on your behalf.
Version (string) --
The Amazon EKS server version for the cluster.
Logging (dict) --
The logging configuration for the cluster.
ClusterLogging (list) --
Cluster logging configurations.
(dict) --
Details for a cluster logging configuration.
Enabled (boolean) --
Whether the logging types that are listed in Types are enabled.
Types (list) --
A list of logging types.
AwsNetworkFirewallFirewallPolicy (dict) --
Details about an Network Firewall firewall policy.
FirewallPolicy (dict) --
The firewall policy configuration.
StatefulRuleGroupReferences (list) --
The stateful rule groups that are used in the firewall policy.
(dict) --
A stateful rule group that is used by the firewall policy.
ResourceArn (string) --
The ARN of the stateful rule group.
StatelessCustomActions (list) --
The custom action definitions that are available to use in the firewall policy's StatelessDefaultActions setting.
(dict) --
A custom action that can be used for stateless packet handling.
ActionDefinition (dict) --
The definition of the custom action.
PublishMetricAction (dict) --
Information about metrics to publish to CloudWatch.
Dimensions (list) --
Defines CloudWatch dimension values to publish.
(dict) --
Defines a CloudWatch dimension value to publish.
Value (string) --
The value to use for the custom metric dimension.
ActionName (string) --
The name of the custom action.
StatelessDefaultActions (list) --
The actions to take on a packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
StatelessFragmentDefaultActions (list) --
The actions to take on a fragmented UDP packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
StatelessRuleGroupReferences (list) --
The stateless rule groups that are used in the firewall policy.
(dict) --
A stateless rule group that is used by the firewall policy.
Priority (integer) --
The order in which to run the stateless rule group.
ResourceArn (string) --
The ARN of the stateless rule group.
FirewallPolicyArn (string) --
The ARN of the firewall policy.
FirewallPolicyId (string) --
The identifier of the firewall policy.
FirewallPolicyName (string) --
The name of the firewall policy.
Description (string) --
A description of the firewall policy.
AwsNetworkFirewallFirewall (dict) --
Details about an Network Firewall firewall.
DeleteProtection (boolean) --
Whether the firewall is protected from deletion. If set to true , then the firewall cannot be deleted.
Description (string) --
A description of the firewall.
FirewallArn (string) --
The ARN of the firewall.
FirewallId (string) --
The identifier of the firewall.
FirewallName (string) --
A descriptive name of the firewall.
FirewallPolicyArn (string) --
The ARN of the firewall policy.
FirewallPolicyChangeProtection (boolean) --
Whether the firewall is protected from a change to the firewall policy. If set to true , you cannot associate a different policy with the firewall.
SubnetChangeProtection (boolean) --
Whether the firewall is protected from a change to the subnet associations. If set to true , you cannot map different subnets to the firewall.
SubnetMappings (list) --
The public subnets that Network Firewall uses for the firewall. Each subnet must belong to a different Availability Zone.
(dict) --
A public subnet that Network Firewall uses for the firewall.
SubnetId (string) --
The identifier of the subnet
VpcId (string) --
The identifier of the VPC where the firewall is used.
AwsNetworkFirewallRuleGroup (dict) --
Details about an Network Firewall rule group.
Capacity (integer) --
The maximum number of operating resources that this rule group can use.
Description (string) --
A description of the rule group.
RuleGroup (dict) --
Details about the rule group.
RuleVariables (dict) --
Additional settings to use in the specified rules.
IpSets (dict) --
A list of IP addresses and address ranges, in CIDR notation.
Definition (list) --
The list of IP addresses and ranges.
PortSets (dict) --
A list of port ranges.
Definition (list) --
The list of port ranges.
RulesSource (dict) --
The rules and actions for the rule group.
For stateful rule groups, can contain RulesString , RulesSourceList , or StatefulRules .
For stateless rule groups, contains StatelessRulesAndCustomActions .
RulesSourceList (dict) --
Stateful inspection criteria for a domain list rule group. A domain list rule group determines access by specific protocols to specific domains.
GeneratedRulesType (string) --
Indicates whether to allow or deny access to the domains listed in Targets .
TargetTypes (list) --
The protocols that you want to inspect. Specify LS_SNI for HTTPS. Specify HTTP_HOST for HTTP. You can specify either or both.
Targets (list) --
The domains that you want to inspect for in your traffic flows. You can provide full domain names, or use the '.' prefix as a wildcard. For example, .example.com matches all domains that end with example.com .
RulesString (string) --
Stateful inspection criteria, provided in Suricata compatible intrusion prevention system (IPS) rules.
StatefulRules (list) --
Suricata rule specifications.
(dict) --
A Suricata rule specification.
Action (string) --
Defines what Network Firewall should do with the packets in a traffic flow when the flow matches the stateful rule criteria.
Header (dict) --
The stateful inspection criteria for the rule.
Destination (string) --
The destination IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
DestinationPort (string) --
The destination port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
Direction (string) --
The direction of traffic flow to inspect. If set to ANY , the inspection matches bidirectional traffic, both from the source to the destination and from the destination to the source. If set to FORWARD , the inspection only matches traffic going from the source to the destination.
Protocol (string) --
The protocol to inspect for. To inspector for all protocols, use IP .
Source (string) --
The source IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
SourcePort (string) --
The source port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
RuleOptions (list) --
Additional options for the rule.
(dict) --
A rule option for a stateful rule.
Keyword (string) --
A keyword to look for.
Settings (list) --
A list of settings.
StatelessRulesAndCustomActions (dict) --
The stateless rules and custom actions used by a stateless rule group.
CustomActions (list) --
Custom actions for the rule group.
(dict) --
A custom action definition. A custom action is an optional, non-standard action to use for stateless packet handling.
ActionDefinition (dict) --
The definition of a custom action.
PublishMetricAction (dict) --
Information about metrics to publish to CloudWatch.
Dimensions (list) --
Defines CloudWatch dimension values to publish.
(dict) --
Defines a CloudWatch dimension value to publish.
Value (string) --
The value to use for the custom metric dimension.
ActionName (string) --
A descriptive name of the custom action.
StatelessRules (list) --
Stateless rules for the rule group.
(dict) --
A stateless rule in the rule group.
Priority (integer) --
Indicates the order in which to run this rule relative to all of the rules in the stateless rule group.
RuleDefinition (dict) --
Provides the definition of the stateless rule.
Actions (list) --
The actions to take on a packet that matches one of the stateless rule definition's match attributes. You must specify a standard action (aws:pass , aws:drop , or aws:forward_to_sfe ). You can then add custom actions.
MatchAttributes (dict) --
The criteria for Network Firewall to use to inspect an individual packet in a stateless rule inspection.
DestinationPorts (list) --
A list of port ranges to specify the destination ports to inspect for.
(dict) --
A port range to specify the destination ports to inspect for.
FromPort (integer) --
The starting port value for the port range.
ToPort (integer) --
The ending port value for the port range.
Destinations (list) --
The destination IP addresses and address ranges to inspect for, in CIDR notation.
(dict) --
A destination IP address or range.
AddressDefinition (string) --
An IP address or a block of IP addresses.
Protocols (list) --
The protocols to inspect for.
SourcePorts (list) --
A list of port ranges to specify the source ports to inspect for.
(dict) --
A port range to specify the source ports to inspect for.
FromPort (integer) --
The starting port value for the port range.
ToPort (integer) --
The ending port value for the port range.
Sources (list) --
The source IP addresses and address ranges to inspect for, in CIDR notation.
(dict) --
A source IP addresses and address range to inspect for.
AddressDefinition (string) --
An IP address or a block of IP addresses.
TcpFlags (list) --
The TCP flags and masks to inspect for.
(dict) --
A set of TCP flags and masks to inspect for.
Flags (list) --
Defines the flags from the Masks setting that must be set in order for the packet to match. Flags that are listed must be set. Flags that are not listed must not be set.
Masks (list) --
The set of flags to consider in the inspection. If not specified, then all flags are inspected.
RuleGroupArn (string) --
The ARN of the rule group.
RuleGroupId (string) --
The identifier of the rule group.
RuleGroupName (string) --
The descriptive name of the rule group.
Type (string) --
The type of rule group. A rule group can be stateful or stateless.
AwsRdsDbSecurityGroup (dict) --
Details about an Amazon RDS DB security group.
DbSecurityGroupArn (string) --
The ARN for the DB security group.
DbSecurityGroupDescription (string) --
Provides the description of the DB security group.
DbSecurityGroupName (string) --
Specifies the name of the DB security group.
Ec2SecurityGroups (list) --
Contains a list of EC2 security groups.
(dict) --
EC2 security group information for an RDS DB security group.
Ec2SecurityGroupId (string) --
Specifies the ID for the EC2 security group.
Ec2SecurityGroupName (string) --
Specifies the name of the EC2 security group.
Ec2SecurityGroupOwnerId (string) --
Provides the Amazon Web Services ID of the owner of the EC2 security group.
Status (string) --
Provides the status of the EC2 security group.
IpRanges (list) --
Contains a list of IP ranges.
(dict) --
IP range information for an RDS DB security group.
CidrIp (string) --
Specifies the IP range.
Status (string) --
Specifies the status of the IP range.
OwnerId (string) --
Provides the Amazon Web Services ID of the owner of a specific DB security group.
VpcId (string) --
Provides VPC ID associated with the DB security group.
AwsKinesisStream (dict) --
Details about an Amazon Kinesis data stream.
Name (string) --
The name of the Kinesis stream. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the stream name.
Arn (string) --
The Amazon Resource Name (ARN) of the Kinesis data stream.
StreamEncryption (dict) --
When specified, enables or updates server-side encryption using an KMS key for a specified stream. Removing this property from your stack template and updating your stack disables encryption.
EncryptionType (string) --
The encryption type to use.
KeyId (string) --
The globally unique identifier for the customer-managed KMS key to use for encryption.
ShardCount (integer) --
The number of shards that the stream uses.
RetentionPeriodHours (integer) --
The number of hours for the data records that are stored in shards to remain accessible.
AwsEc2TransitGateway (dict) --
Details about an Amazon EC2 transit gateway that interconnects your virtual private clouds (VPC) and on-premises networks.
Id (string) --
The ID of the transit gateway.
Description (string) --
The description of the transit gateway.
DefaultRouteTablePropagation (string) --
Turn on or turn off automatic propagation of routes to the default propagation route table.
AutoAcceptSharedAttachments (string) --
Turn on or turn off automatic acceptance of attachment requests.
DefaultRouteTableAssociation (string) --
Turn on or turn off automatic association with the default association route table.
TransitGatewayCidrBlocks (list) --
The transit gateway Classless Inter-Domain Routing (CIDR) blocks.
AssociationDefaultRouteTableId (string) --
The ID of the default association route table.
PropagationDefaultRouteTableId (string) --
The ID of the default propagation route table.
VpnEcmpSupport (string) --
Turn on or turn off Equal Cost Multipath Protocol (ECMP) support.
DnsSupport (string) --
Turn on or turn off DNS support.
MulticastSupport (string) --
Indicates whether multicast is supported on the transit gateway.
AmazonSideAsn (integer) --
A private Autonomous System Number (ASN) for the Amazon side of a BGP session.
AwsEfsAccessPoint (dict) --
Details about an Amazon EFS access point. An access point is an application-specific view into an EFS file system that applies an operating system user and group, and a file system path, to any file system request made through the access point.
AccessPointId (string) --
The ID of the Amazon EFS access point.
Arn (string) --
The Amazon Resource Name (ARN) of the Amazon EFS access point.
ClientToken (string) --
The opaque string specified in the request to ensure idempotent creation.
FileSystemId (string) --
The ID of the Amazon EFS file system that the access point applies to.
PosixUser (dict) --
The full POSIX identity, including the user ID, group ID, and secondary group IDs on the access point, that is used for all file operations by NFS clients using the access point.
Gid (string) --
The POSIX group ID used for all file system operations using this access point.
SecondaryGids (list) --
Secondary POSIX group IDs used for all file system operations using this access point.
Uid (string) --
The POSIX user ID used for all file system operations using this access point.
RootDirectory (dict) --
The directory on the Amazon EFS file system that the access point exposes as the root directory to NFS clients using the access point.
CreationInfo (dict) --
Specifies the POSIX IDs and permissions to apply to the access point's root directory.
OwnerGid (string) --
Specifies the POSIX group ID to apply to the root directory.
OwnerUid (string) --
Specifies the POSIX user ID to apply to the root directory.
Permissions (string) --
Specifies the POSIX permissions to apply to the root directory, in the format of an octal number representing the file's mode bits.
Path (string) --
Specifies the path on the Amazon EFS file system to expose as the root directory to NFS clients using the access point to access the EFS file system. A path can have up to four subdirectories. If the specified path does not exist, you are required to provide CreationInfo .
AwsCloudFormationStack (dict) --
Details about an CloudFormation stack. A stack is a collection of Amazon Web Services resources that you can manage as a single unit.
Capabilities (list) --
The capabilities allowed in the stack.
CreationTime (string) --
The time at which the stack was created.
Description (string) --
A user-defined description associated with the stack.
DisableRollback (boolean) --
Boolean to enable or disable rollback on stack creation failures.
DriftInformation (dict) --
Information about whether a stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters.
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
EnableTerminationProtection (boolean) --
Whether termination protection is enabled for the stack.
LastUpdatedTime (string) --
The time the nested stack was last updated. This field will only be returned if the stack has been updated at least once.
NotificationArns (list) --
The Amazon Resource Names (ARNs) of the Amazon SNS topic to which stack-related events are published.
Outputs (list) --
A list of output structures.
(dict) --
Provides information about the CloudFormation stack output.
Description (string) --
A user-defined description associated with the output.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
RoleArn (string) --
The ARN of an IAM role that's associated with the stack.
StackId (string) --
Unique identifier of the stack.
StackName (string) --
The name associated with the stack.
StackStatus (string) --
Current status of the stack.
StackStatusReason (string) --
Success or failure message associated with the stack status.
TimeoutInMinutes (integer) --
The length of time, in minutes, that CloudFormation waits for the nested stack to reach the CREATE_COMPLETE state.
AwsCloudWatchAlarm (dict) --
Details about an Amazon CloudWatch alarm. An alarm allows you to monitor and receive alerts about your Amazon Web Services resources and applications across multiple Regions.
ActionsEnabled (boolean) --
Indicates whether actions should be executed during any changes to the alarm state.
AlarmActions (list) --
The list of actions, specified as Amazon Resource Names (ARNs) to execute when this alarm transitions into an ALARM state from any other state.
AlarmArn (string) --
The ARN of the alarm.
AlarmConfigurationUpdatedTimestamp (string) --
The time stamp of the last update to the alarm configuration.
AlarmDescription (string) --
The description of the alarm.
AlarmName (string) --
The name of the alarm. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the alarm name.
ComparisonOperator (string) --
The arithmetic operation to use when comparing the specified statistic and threshold. The specified statistic value is used as the first operand.
DatapointsToAlarm (integer) --
The number of datapoints that must be breaching to trigger the alarm.
Dimensions (list) --
The dimensions for the metric associated with the alarm.
(dict) --
Details about the dimensions for the metric associated with the alarm.
Name (string) --
The name of a dimension.
Value (string) --
The value of a dimension.
EvaluateLowSampleCountPercentile (string) --
Used only for alarms based on percentiles. If ignore , the alarm state does not change during periods with too few data points to be statistically significant. If evaluate or this parameter is not used, the alarm is always evaluated and possibly changes state no matter how many data points are available.
EvaluationPeriods (integer) --
The number of periods over which data is compared to the specified threshold.
ExtendedStatistic (string) --
The percentile statistic for the metric associated with the alarm.
InsufficientDataActions (list) --
The actions to execute when this alarm transitions to the INSUFFICIENT_DATA state from any other state. Each action is specified as an ARN.
MetricName (string) --
The name of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you use Metrics instead and you can't specify MetricName .
Namespace (string) --
The namespace of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you can't specify Namespace and you use Metrics instead.
OkActions (list) --
The actions to execute when this alarm transitions to the OK state from any other state. Each action is specified as an ARN.
Period (integer) --
The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric.
Statistic (string) --
The statistic for the metric associated with the alarm, other than percentile. For percentile statistics, use ExtendedStatistic .
For an alarm based on a metric, you must specify either Statistic or ExtendedStatistic but not both.
For an alarm based on a math expression, you can't specify Statistic . Instead, you use Metrics .
Threshold (float) --
The value to compare with the specified statistic.
ThresholdMetricId (string) --
n an alarm based on an anomaly detection model, this is the ID of the ANOMALY_DETECTION_BAND function used as the threshold for the alarm.
TreatMissingData (string) --
Sets how this alarm is to handle missing data points.
Unit (string) --
The unit of the metric associated with the alarm.
AwsEc2VpcPeeringConnection (dict) --
Details about an Amazon EC2 VPC peering connection. A VPC peering connection is a networking connection between two VPCs that enables you to route traffic between them privately.
AccepterVpcInfo (dict) --
Information about the accepter VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
CidrBlockSet (list) --
Information about the IPv4 CIDR blocks for the VPC.
(dict) --
Provides details about the IPv4 CIDR blocks for the VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
Ipv6CidrBlockSet (list) --
The IPv6 CIDR block for the VPC.
(dict) --
Provides details about the IPv6 CIDR blocks for the VPC.
Ipv6CidrBlock (string) --
The IPv6 CIDR block for the VPC.
OwnerId (string) --
The ID of the Amazon Web Services account that owns the VPC.
PeeringOptions (dict) --
Information about the VPC peering connection options for the accepter or requester VPC.
AllowDnsResolutionFromRemoteVpc (boolean) --
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
AllowEgressFromLocalClassicLinkToRemoteVpc (boolean) --
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
AllowEgressFromLocalVpcToRemoteClassicLink (boolean) --
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
Region (string) --
The Amazon Web Services Region in which the VPC is located.
VpcId (string) --
The ID of the VPC.
ExpirationTime (string) --
The time at which an unaccepted VPC peering connection will expire.
RequesterVpcInfo (dict) --
Information about the requester VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
CidrBlockSet (list) --
Information about the IPv4 CIDR blocks for the VPC.
(dict) --
Provides details about the IPv4 CIDR blocks for the VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
Ipv6CidrBlockSet (list) --
The IPv6 CIDR block for the VPC.
(dict) --
Provides details about the IPv6 CIDR blocks for the VPC.
Ipv6CidrBlock (string) --
The IPv6 CIDR block for the VPC.
OwnerId (string) --
The ID of the Amazon Web Services account that owns the VPC.
PeeringOptions (dict) --
Information about the VPC peering connection options for the accepter or requester VPC.
AllowDnsResolutionFromRemoteVpc (boolean) --
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
AllowEgressFromLocalClassicLinkToRemoteVpc (boolean) --
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
AllowEgressFromLocalVpcToRemoteClassicLink (boolean) --
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
Region (string) --
The Amazon Web Services Region in which the VPC is located.
VpcId (string) --
The ID of the VPC.
Status (dict) --
The status of the VPC peering connection.
Code (string) --
The status of the VPC peering connection.
Message (string) --
A message that provides more information about the status, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection.
AwsWafRegionalRuleGroup (dict) --
Details about an WAF rule group for Regional resources.
MetricName (string) --
A name for the metrics for this rule group.
Name (string) --
The descriptive name of the rule group.
RuleGroupId (string) --
The ID of the rule group.
Rules (list) --
Provides information about the rule statements used to identify the web requests that you want to allow, block, or count.
(dict) --
Provides information about the rules attached to a rule group
Action (dict) --
The action that WAF should take on a web request when it matches the criteria defined in the rule.
Type (string) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
Priority (integer) --
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
RuleId (string) --
The ID for a rule.
Type (string) --
The type of rule in the rule group.
AwsWafRegionalRule (dict) --
Details about an WAF rule for Regional resources.
MetricName (string) --
A name for the metrics for the rule.
Name (string) --
A descriptive name for the rule.
PredicateList (list) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
(dict) --
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
DataId (string) --
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Negated (boolean) --
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
Type (string) --
The type of predicate in a rule, such as ByteMatch or IPSet .
RuleId (string) --
The ID of the rule.
AwsWafRegionalWebAcl (dict) --
Details about an WAF web access control list (web ACL) for Regional resources.
DefaultAction (string) --
The action to perform if none of the rules contained in the web ACL match.
MetricName (string) --
A name for the metrics for this web ACL.
Name (string) --
A descriptive name for the web ACL.
RulesList (list) --
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
(dict) --
A combination of ByteMatchSet , IPSet , and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count.
Action (dict) --
The action that AWS WAF takes when a web request matches all conditions in the rule, such as allow, block, or count the request.
Type (string) --
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
OverrideAction (dict) --
Overrides the rule evaluation result in the rule group.
Type (string) --
Overrides the rule evaluation result in the rule group.
Priority (integer) --
The order in which WAF evaluates the rules in a web ACL.
RuleId (string) --
The ID of an WAF Regional rule to associate with a web ACL.
Type (string) --
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
WebAclId (string) --
The ID of the web ACL.
AwsWafRule (dict) --
Details about an WAF rule for global resources.
MetricName (string) --
The name of the metrics for this rule.
Name (string) --
A descriptive name for the rule.
PredicateList (list) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
(dict) --
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
DataId (string) --
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Negated (boolean) --
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
Type (string) --
The type of predicate in a rule, such as ByteMatch or IPSet .
RuleId (string) --
The ID of the WAF rule.
AwsWafRuleGroup (dict) --
Details about an WAF rule group for global resources.
MetricName (string) --
The name of the metrics for this rule group.
Name (string) --
The name of the rule group.
RuleGroupId (string) --
The ID of the rule group.
Rules (list) --
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
(dict) --
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
Action (dict) --
Provides information about what action WAF should take on a web request when it matches the criteria defined in the rule.
Type (string) --
The action that WAF should take on a web request when it matches the rule's statement.
Priority (integer) --
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
RuleId (string) --
The rule ID for a rule.
Type (string) --
The type of rule.
AwsEcsTask (dict) --
Details about a task in a cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the task.
TaskDefinitionArn (string) --
The ARN of the task definition that creates the task.
Version (string) --
The version counter for the task.
CreatedAt (string) --
The Unix timestamp for the time when the task was created. More specifically, it's for the time when the task entered the PENDING state.
StartedAt (string) --
The Unix timestamp for the time when the task started. More specifically, it's for the time when the task transitioned from the PENDING state to the RUNNING state.
StartedBy (string) --
The tag specified when a task is started. If an Amazon ECS service started the task, the startedBy parameter contains the deployment ID of that service.
Group (string) --
The name of the task group that's associated with the task.
Volumes (list) --
Details about the data volume that is used in a task definition.
(dict) --
Provides information about a data volume that's used in a task definition.
Name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
Host (dict) --
This parameter is specified when you use bind mount host volumes. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it's stored.
SourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that's presented to the container.
Containers (list) --
The containers that are associated with the task.
(dict) --
Provides information about an Amazon ECS container.
Name (string) --
The name of the container.
Image (string) --
The image used for the container.
MountPoints (list) --
The mount points for data volumes in your container.
(dict) --
Details for a volume mount point that's used in a container definition.
SourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
ContainerPath (string) --
The path on the container to mount the host volume at.
Privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
Compliance (dict) --
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
Status (string) --
The result of a standards check.
The valid values for Status are as follows.
PASSED - Standards check passed for all evaluated resources.WARNING - Some information is missing or this check is not supported for your configuration.FAILED - Standards check failed for at least one evaluated resource.NOT_AVAILABLE - Check could not be performed due to a service outage, API error, or because the result of the Config evaluation was NOT_APPLICABLE . If the Config evaluation result was NOT_APPLICABLE , then after 3 days, Security Hub automatically archives the finding.RelatedRequirements (list) --
For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
StatusReasons (list) --
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
(dict) --
Provides additional context for the value of Compliance.Status .
ReasonCode (string) --
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
Description (string) --
The corresponding description for the status reason code.
VerificationState (string) --
Indicates the veracity of a finding.
WorkflowState (string) --
The workflow state of a finding.
Workflow (dict) --
Provides information about the status of the investigation into a finding.
Status (string) --
The status of the investigation into the finding. The workflow status is specific to an individual finding. It does not affect the generation of new findings. For example, setting the workflow status to SUPPRESSED or RESOLVED does not prevent a new finding for the same issue.
The allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .ComplianceStatus changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that you notified the resource owner about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner.SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The finding is no longer updated.RESOLVED - The finding was reviewed and remediated and is now considered resolved.RecordState (string) --
The record state of a finding.
RelatedFindings (list) --
A list of related findings.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Note (dict) --
A user-defined note added to a finding.
Text (string) --
The text of a note.
UpdatedBy (string) --
The principal that created a note.
UpdatedAt (string) --
The timestamp of when the note was updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Vulnerabilities (list) --
Provides a list of vulnerabilities associated with the findings.
(dict) --
A vulnerability associated with a finding.
Id (string) --
The identifier of the vulnerability.
VulnerablePackages (list) --
List of software packages that have the vulnerability.
(dict) --
Information about a software package.
Name (string) --
The name of the software package.
Version (string) --
The version of the software package.
Epoch (string) --
The epoch of the software package.
Release (string) --
The release of the software package.
Architecture (string) --
The architecture used for the software package.
PackageManager (string) --
The source of the package.
FilePath (string) --
The file system path to the package manager inventory file.
Cvss (list) --
CVSS scores from the advisory related to the vulnerability.
(dict) --
CVSS scores from the advisory related to the vulnerability.
Version (string) --
The version of CVSS for the CVSS score.
BaseScore (float) --
The base CVSS score.
BaseVector (string) --
The base scoring vector for the CVSS score.
Source (string) --
The origin of the original CVSS score and vector.
Adjustments (list) --
Adjustments to the CVSS metrics.
(dict) --
An adjustment to the CVSS metric.
Metric (string) --
The metric to adjust.
Reason (string) --
The reason for the adjustment.
RelatedVulnerabilities (list) --
List of vulnerabilities that are related to this vulnerability.
Vendor (dict) --
Information about the vendor that generates the vulnerability report.
Name (string) --
The name of the vendor.
Url (string) --
The URL of the vulnerability advisory.
VendorSeverity (string) --
The severity that the vendor assigned to the vulnerability.
VendorCreatedAt (string) --
Indicates when the vulnerability advisory was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
VendorUpdatedAt (string) --
Indicates when the vulnerability advisory was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ReferenceUrls (list) --
A list of URLs that provide additional information about the vulnerability.
PatchSummary (dict) --
Provides an overview of the patch compliance status for an instance against a selected compliance standard.
Id (string) --
The identifier of the compliance standard that was used to determine the patch compliance status.
InstalledCount (integer) --
The number of patches from the compliance standard that were installed successfully.
MissingCount (integer) --
The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.
FailedCount (integer) --
The number of patches from the compliance standard that failed to install.
InstalledOtherCount (integer) --
The number of installed patches that are not part of the compliance standard.
InstalledRejectedCount (integer) --
The number of patches that are installed but are also on a list of patches that the customer rejected.
InstalledPendingReboot (integer) --
The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.
OperationStartTime (string) --
Indicates when the operation started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
OperationEndTime (string) --
Indicates when the operation completed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RebootOption (string) --
The reboot option specified for the instance.
Operation (string) --
The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL .
Action (dict) --
Provides details about an action that affects or that was taken on a resource.
ActionType (string) --
The type of action that was detected. The possible action types are:
NETWORK_CONNECTIONAWS_API_CALLDNS_REQUESTPORT_PROBENetworkConnectionAction (dict) --
Included if ActionType is NETWORK_CONNECTION . Provides details about the network connection that was detected.
ConnectionDirection (string) --
The direction of the network connection request (IN or OUT ).
RemoteIpDetails (dict) --
Information about the remote IP address that issued the network connection request.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
RemotePortDetails (dict) --
Information about the port on the remote IP address.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the remote connection.
LocalPortDetails (dict) --
Information about the port on the EC2 instance.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the local connection.
Protocol (string) --
The protocol used to make the network connection request.
Blocked (boolean) --
Indicates whether the network connection attempt was blocked.
AwsApiCallAction (dict) --
Included if ActionType is AWS_API_CALL . Provides details about the API call that was detected.
Api (string) --
The name of the API method that was issued.
ServiceName (string) --
The name of the Amazon Web Services service that the API method belongs to.
CallerType (string) --
Indicates whether the API call originated from a remote IP address (remoteip ) or from a DNS domain (domain ).
RemoteIpDetails (dict) --
Provided if CallerType is remoteIp . Provides information about the remote IP address that the API call originated from.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
DomainDetails (dict) --
Provided if CallerType is domain . Provides information about the DNS domain that the API call originated from.
Domain (string) --
The name of the DNS domain that issued the API call.
AffectedResources (dict) --
Identifies the resources that were affected by the API call.
FirstSeen (string) --
An ISO8601-formatted timestamp that indicates when the API call was first observed.
LastSeen (string) --
An ISO8601-formatted timestamp that indicates when the API call was most recently observed.
DnsRequestAction (dict) --
Included if ActionType is DNS_REQUEST . Provides details about the DNS request that was detected.
Domain (string) --
The DNS domain that is associated with the DNS request.
Protocol (string) --
The protocol that was used for the DNS request.
Blocked (boolean) --
Indicates whether the DNS request was blocked.
PortProbeAction (dict) --
Included if ActionType is PORT_PROBE . Provides details about the port probe that was detected.
PortProbeDetails (list) --
Information about the ports affected by the port probe.
(dict) --
A port scan that was part of the port probe. For each scan, PortProbeDetails provides information about the local IP address and port that were scanned, and the remote IP address that the scan originated from.
LocalPortDetails (dict) --
Provides information about the port that was scanned.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the local connection.
LocalIpDetails (dict) --
Provides information about the IP address where the scanned port is located.
IpAddressV4 (string) --
The IP address.
RemoteIpDetails (dict) --
Provides information about the remote IP address that performed the scan.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
Blocked (boolean) --
Indicates whether the port probe was blocked.
FindingProviderFields (dict) --
In a BatchImportFindings request, finding providers use FindingProviderFields to provide and update their own values for confidence, criticality, related findings, severity, and types.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
RelatedFindings (list) --
A list of findings that are related to the current finding.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Severity (dict) --
The severity of a finding.
Label (string) --
The severity label assigned to the finding by the finding provider.
Original (string) --
The finding provider's original value for the severity.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
Sample (boolean) --
Indicates whether the finding is a sample finding.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionget_insight_results(**kwargs)¶Lists the results of the Security Hub insight specified by the insight ARN.
See also: AWS API Documentation
Request Syntax
response = client.get_insight_results(
InsightArn='string'
)
[REQUIRED]
The ARN of the insight for which to return results.
{
'InsightResults': {
'InsightArn': 'string',
'GroupByAttribute': 'string',
'ResultValues': [
{
'GroupByAttributeValue': 'string',
'Count': 123
},
]
}
}
Response Structure
The insight results returned by the operation.
The ARN of the insight whose results are returned by the GetInsightResults operation.
The attribute that the findings are grouped by for the insight whose results are returned by the GetInsightResults operation.
The list of insight result values returned by the GetInsightResults operation.
The insight result values returned by the GetInsightResults operation.
The value of the attribute that the findings are grouped by for the insight whose results are returned by the GetInsightResults operation.
The number of findings returned for each GroupByAttributeValue .
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_insights(**kwargs)¶Lists and describes insights for the specified insight ARNs.
See also: AWS API Documentation
Request Syntax
response = client.get_insights(
InsightArns=[
'string',
],
NextToken='string',
MaxResults=123
)
The ARNs of the insights to describe. If you do not provide any insight ARNs, then GetInsights returns all of your custom insights. It does not return any managed insights.
The token that is required for pagination. On your first call to the GetInsights operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Insights': [
{
'InsightArn': 'string',
'Name': 'string',
'Filters': {
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
'GroupByAttribute': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Insights (list) --
The insights returned by the operation.
(dict) --
Contains information about a Security Hub insight.
InsightArn (string) --
The ARN of a Security Hub insight.
Name (string) --
The name of a Security Hub insight.
Filters (dict) --
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
ProductArn (list) --
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAwsAccountId (list) --
The Amazon Web Services account ID that a finding is generated in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceId (list) --
The security findings provider-specific identifier for a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceGeneratorId (list) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRegion (list) --
The Region from which the finding was generated.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceType (list) --
A finding type in the format of namespace/category/classifier that classifies a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFirstObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
LastObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
CreatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
UpdatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
SeverityProduct (list) --
The native severity as defined by the security-findings provider's solution that generated the finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityNormalized (list) --
The normalized severity of a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityLabel (list) --
The label of a finding's severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceConfidence (list) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Criticality (list) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Title (list) --
A finding's title.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceDescription (list) --
A finding's description.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRecommendationText (list) --
The recommendation of what to do about the issue described in a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSourceUrl (list) --
A URL that links to a page about the current finding in the security-findings provider's solution.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProductFields (list) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ProductName (list) --
The name of the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceCompanyName (list) --
The name of the findings provider (company) that owns the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceUserDefinedFields (list) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
MalwareName (list) --
The name of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwareType (list) --
The type of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwarePath (list) --
The filesystem path of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwareState (list) --
The state of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkDirection (list) --
Indicates the direction of network traffic associated with a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkProtocol (list) --
The protocol of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkSourceIpV4 (list) --
The source IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourceIpV6 (list) --
The source IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourcePort (list) --
The source port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkSourceDomain (list) --
The source domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkSourceMac (list) --
The source media access control (MAC) address of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkDestinationIpV4 (list) --
The destination IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationIpV6 (list) --
The destination IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationPort (list) --
The destination port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkDestinationDomain (list) --
The destination domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessName (list) --
The name of the process.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessPath (list) --
The path to the process executable.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessPid (list) --
The process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessParentPid (list) --
The parent process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessLaunchedAt (list) --
The date/time that the process was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ProcessTerminatedAt (list) --
The date/time that the process was terminated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorType (list) --
The type of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorValue (list) --
The value of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorCategory (list) --
The category of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorLastObservedAt (list) --
The date/time of the last observation of a threat intelligence indicator.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorSource (list) --
The source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorSourceUrl (list) --
The URL for more details from the source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceType (list) --
Specifies the type of the resource that details are provided for.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceId (list) --
The canonical identifier for the given resource type.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourcePartition (list) --
The canonical Amazon Web Services partition name that the Region is assigned to.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceRegion (list) --
The canonical Amazon Web Services external Region name where this resource is located.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceTags (list) --
A list of Amazon Web Services tags associated with a resource at the time the finding was processed.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ResourceAwsEc2InstanceType (list) --
The instance type of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceImageId (list) --
The Amazon Machine Image (AMI) ID of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceIpV4Addresses (list) --
The IPv4 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceIpV6Addresses (list) --
The IPv6 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceKeyName (list) --
The key name associated with the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceIamInstanceProfileArn (list) --
The IAM profile ARN of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceVpcId (list) --
The identifier of the VPC that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceSubnetId (list) --
The identifier of the subnet that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceLaunchedAt (list) --
The date and time the instance was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsS3BucketOwnerId (list) --
The canonical user ID of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsS3BucketOwnerName (list) --
The display name of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyUserName (list) --
The user associated with the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyPrincipalName (list) --
The name of the principal that is associated with an IAM access key.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyStatus (list) --
The status of the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyCreatedAt (list) --
The creation date/time of the IAM access key related to a finding.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsIamUserUserName (list) --
The name of an IAM user.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerName (list) --
The name of the container related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerImageId (list) --
The identifier of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerImageName (list) --
The name of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerLaunchedAt (list) --
The date/time that the container was started.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceDetailsOther (list) --
The details of a resource that doesn't have a specific subfield for the resource type defined.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ComplianceStatus (list) --
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceVerificationState (list) --
The veracity of a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceWorkflowState (list) --
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceWorkflowStatus (list) --
The status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRecordState (list) --
The updated record state for the finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRelatedFindingsId (list) --
The solution-generated identifier for a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNoteText (list) --
The text of a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNoteUpdatedAt (list) --
The timestamp of when the note was updated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
NoteUpdatedBy (list) --
The principal that created a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceKeyword (list) --
A keyword for a finding.
(dict) --
A keyword filter for querying findings.
Value (string) --
A value for the keyword.
FindingProviderFieldsConfidence (list) --
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
FindingProviderFieldsCriticality (list) --
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
FindingProviderFieldsRelatedFindingsId (list) --
The finding identifier of a related finding that is identified by the finding provider.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsRelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding that is identified by the finding provider.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsSeverityLabel (list) --
The finding provider value for the severity label.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsSeverityOriginal (list) --
The finding provider's original value for the severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsTypes (list) --
One or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSample (list) --
Indicates whether or not sample findings are included in the filter results.
(dict) --
Boolean filter for querying findings.
Value (boolean) --
The value of the boolean.
GroupByAttribute (string) --
The grouping attribute for the insight's findings. Indicates how to group the matching findings, and identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_invitations_count()¶Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
See also: AWS API Documentation
Request Syntax
response = client.get_invitations_count()
{
'InvitationsCount': 123
}
Response Structure
The number of all membership invitations sent to this Security Hub member account, not including the currently accepted invitation.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionget_master_account()¶This method is deprecated. Instead, use GetAdministratorAccount .
The Security Hub console continues to use GetMasterAccount . It will eventually change to use GetAdministratorAccount . Any IAM policies that specifically control access to this function must continue to use GetMasterAccount . You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount .
Provides the details for the Security Hub administrator account for the current member account.
Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.get_master_account()
{
'Master': {
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
}
}
Response Structure
A list of details about the Security Hub administrator account for the current member account.
The account ID of the Security Hub administrator account that the invitation was sent from.
The ID of the invitation sent to the member account.
The timestamp of when the invitation was sent.
The current status of the association between the member and administrator accounts.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_members(**kwargs)¶Returns the details for the Security Hub member accounts for the specified account IDs.
An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.
The results include both member accounts that are managed using Organizations and accounts that were invited manually.
See also: AWS API Documentation
Request Syntax
response = client.get_members(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs for the Security Hub member accounts to return the details for.
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of details about the Security Hub member accounts.
The details about a member account.
The Amazon Web Services account ID of the member account.
The email address of the member account.
This is replaced by AdministratorID .
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
The status of the relationship between the member account and its administrator account.
The status can have one of the following values:
CREATED - Indicates that the administrator account added the member account, but has not yet invited the member account.INVITED - Indicates that the administrator account invited the member account. The member account has not yet responded to the invitation.ENABLED - Indicates that the member account is currently active. For manually invited member accounts, indicates that the member account accepted the invitation.REMOVED - Indicates that the administrator account disassociated the member account.RESIGNED - Indicates that the member account disassociated themselves from the administrator account.DELETED - Indicates that the administrator account deleted the member account.ACCOUNT_SUSPENDED - Indicates that an organization account was suspended from Amazon Web Services at the same time that the administrator account tried to enable the organization account as a member account.A timestamp for the date and time when the invitation was sent to the member account.
The timestamp for the date and time when the member account was updated.
The list of Amazon Web Services accounts that could not be processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionget_paginator(operation_name)¶Create a paginator for an operation.
create_foo, and you'd normally invoke the
operation as client.create_foo(**kwargs), if the
create_foo operation can be paginated, you can use the
call client.get_paginator("create_foo").client.can_paginate method to
check if an operation is pageable.get_waiter(waiter_name)¶Returns an object that can wait for some condition.
invite_members(**kwargs)¶Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.
Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.
When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.
See also: AWS API Documentation
Request Syntax
response = client.invite_members(
AccountIds=[
'string',
]
)
[REQUIRED]
The list of account IDs of the Amazon Web Services accounts to invite to Security Hub as members.
{
'UnprocessedAccounts': [
{
'AccountId': 'string',
'ProcessingResult': 'string'
},
]
}
Response Structure
The list of Amazon Web Services accounts that could not be processed. For each account, the list includes the account ID and the email address.
Details about the account that was not processed.
An Amazon Web Services account ID of the account that was not processed.
The reason that the account was not processed.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionlist_enabled_products_for_import(**kwargs)¶Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.list_enabled_products_for_import(
NextToken='string',
MaxResults=123
)
The token that is required for pagination. On your first call to the ListEnabledProductsForImport operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'ProductSubscriptions': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
ProductSubscriptions (list) --
The list of ARNs for the resources that represent your subscriptions to products.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionlist_finding_aggregators(**kwargs)¶If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
See also: AWS API Documentation
Request Syntax
response = client.list_finding_aggregators(
NextToken='string',
MaxResults=123
)
dict
Response Syntax
{
'FindingAggregators': [
{
'FindingAggregatorArn': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
FindingAggregators (list) --
The list of finding aggregators. This operation currently only returns a single result.
(dict) --
A finding aggregator. A finding aggregator contains the configuration for finding aggregation.
FindingAggregatorArn (string) --
The ARN of the finding aggregator. You use the finding aggregator ARN to retrieve details for, update, and delete the finding aggregator.
NextToken (string) --
If there are more results, this is the token to provide in the next call to ListFindingAggregators .
This operation currently only returns a single result.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionSecurityHub.Client.exceptions.InvalidInputExceptionlist_invitations(**kwargs)¶Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
See also: AWS API Documentation
Request Syntax
response = client.list_invitations(
MaxResults=123,
NextToken='string'
)
The token that is required for pagination. On your first call to the ListInvitations operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Invitations': [
{
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Invitations (list) --
The details of the invitations returned by the operation.
(dict) --
Details about an invitation.
AccountId (string) --
The account ID of the Security Hub administrator account that the invitation was sent from.
InvitationId (string) --
The ID of the invitation sent to the member account.
InvitedAt (datetime) --
The timestamp of when the invitation was sent.
MemberStatus (string) --
The current status of the association between the member and administrator accounts.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionlist_members(**kwargs)¶Lists details about all member accounts for the current Security Hub administrator account.
The results include both member accounts that belong to an organization and member accounts that were invited manually.
See also: AWS API Documentation
Request Syntax
response = client.list_members(
OnlyAssociated=True|False,
MaxResults=123,
NextToken='string'
)
Specifies which member accounts to include in the response based on their relationship status with the administrator account. The default value is TRUE .
If OnlyAssociated is set to TRUE , the response includes member accounts whose relationship status with the administrator account is set to ENABLED .
If OnlyAssociated is set to FALSE , the response includes all existing member accounts.
The token that is required for pagination. On your first call to the ListMembers operation, set the value of this parameter to NULL .
For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.
dict
Response Syntax
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Members (list) --
Member details returned by the operation.
(dict) --
The details about a member account.
AccountId (string) --
The Amazon Web Services account ID of the member account.
Email (string) --
The email address of the member account.
MasterId (string) --
This is replaced by AdministratorID .
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
AdministratorId (string) --
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
MemberStatus (string) --
The status of the relationship between the member account and its administrator account.
The status can have one of the following values:
CREATED - Indicates that the administrator account added the member account, but has not yet invited the member account.INVITED - Indicates that the administrator account invited the member account. The member account has not yet responded to the invitation.ENABLED - Indicates that the member account is currently active. For manually invited member accounts, indicates that the member account accepted the invitation.REMOVED - Indicates that the administrator account disassociated the member account.RESIGNED - Indicates that the member account disassociated themselves from the administrator account.DELETED - Indicates that the administrator account deleted the member account.ACCOUNT_SUSPENDED - Indicates that an organization account was suspended from Amazon Web Services at the same time that the administrator account tried to enable the organization account as a member account.InvitedAt (datetime) --
A timestamp for the date and time when the invitation was sent to the member account.
UpdatedAt (datetime) --
The timestamp for the date and time when the member account was updated.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionlist_organization_admin_accounts(**kwargs)¶Lists the Security Hub administrator accounts. Can only be called by the organization management account.
See also: AWS API Documentation
Request Syntax
response = client.list_organization_admin_accounts(
MaxResults=123,
NextToken='string'
)
ListOrganizationAdminAccounts operation, set the value of this parameter to NULL . For subsequent calls to the operation, to continue listing data, set the value of this parameter to the value returned from the previous response.dict
Response Syntax
{
'AdminAccounts': [
{
'AccountId': 'string',
'Status': 'ENABLED'|'DISABLE_IN_PROGRESS'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
AdminAccounts (list) --
The list of Security Hub administrator accounts.
(dict) --
Represents a Security Hub administrator account designated by an organization management account.
AccountId (string) --
The Amazon Web Services account identifier of the Security Hub administrator account.
Status (string) --
The current status of the Security Hub administrator account. Indicates whether the account is currently enabled as a Security Hub administrator.
NextToken (string) --
The pagination token to use to request the next page of results.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionReturns a list of tags associated with a resource.
See also: AWS API Documentation
Request Syntax
response = client.list_tags_for_resource(
ResourceArn='string'
)
[REQUIRED]
The ARN of the resource to retrieve tags for.
{
'Tags': {
'string': 'string'
}
}
Response Structure
The tags associated with a resource.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptiontag_resource(**kwargs)¶Adds one or more tags to a resource.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
ResourceArn='string',
Tags={
'string': 'string'
}
)
[REQUIRED]
The ARN of the resource to apply the tags to.
[REQUIRED]
The tags to add to the resource. You can add up to 50 tags at a time. The tag keys can be no longer than 128 characters. The tag values can be no longer than 256 characters.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionuntag_resource(**kwargs)¶Removes one or more tags from a resource.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
ResourceArn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The ARN of the resource to remove the tags from.
[REQUIRED]
The tag keys associated with the tags to remove from the resource. You can remove up to 50 tags at a time.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_action_target(**kwargs)¶Updates the name and description of a custom action target in Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.update_action_target(
ActionTargetArn='string',
Name='string',
Description='string'
)
[REQUIRED]
The ARN of the custom action target to update.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_finding_aggregator(**kwargs)¶Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.
You must run UpdateFindingAggregator from the current aggregation Region.
See also: AWS API Documentation
Request Syntax
response = client.update_finding_aggregator(
FindingAggregatorArn='string',
RegionLinkingMode='string',
Regions=[
'string',
]
)
[REQUIRED]
The ARN of the finding aggregator. To obtain the ARN, use ListFindingAggregators .
[REQUIRED]
Indicates whether to aggregate findings from all of the available Regions in the current partition. Also determines whether to automatically aggregate findings from new Regions as Security Hub supports them and you opt into them.
The selected option also determines how to use the Regions provided in the Regions list.
The options are as follows:
ALL_REGIONS - Indicates to aggregate findings from all of the Regions where Security Hub is enabled. When you choose this option, Security Hub also automatically aggregates findings from new Regions as Security Hub supports them and you opt into them.ALL_REGIONS_EXCEPT_SPECIFIED - Indicates to aggregate findings from all of the Regions where Security Hub is enabled, except for the Regions listed in the Regions parameter. When you choose this option, Security Hub also automatically aggregates findings from new Regions as Security Hub supports them and you opt into them.SPECIFIED_REGIONS - Indicates to aggregate findings only from the Regions listed in the Regions parameter. Security Hub does not automatically aggregate findings from new Regions.If RegionLinkingMode is ALL_REGIONS_EXCEPT_SPECIFIED , then this is a comma-separated list of Regions that do not aggregate findings to the aggregation Region.
If RegionLinkingMode is SPECIFIED_REGIONS , then this is a comma-separated list of Regions that do aggregate findings to the aggregation Region.
dict
Response Syntax
{
'FindingAggregatorArn': 'string',
'FindingAggregationRegion': 'string',
'RegionLinkingMode': 'string',
'Regions': [
'string',
]
}
Response Structure
(dict) --
FindingAggregatorArn (string) --
The ARN of the finding aggregator.
FindingAggregationRegion (string) --
The aggregation Region.
RegionLinkingMode (string) --
Indicates whether to link all Regions, all Regions except for a list of excluded Regions, or a list of included Regions.
Regions (list) --
The list of excluded Regions or included Regions.
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.AccessDeniedExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_findings(**kwargs)¶UpdateFindingsis deprecated. Instead ofUpdateFindings, useBatchUpdateFindings.
Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
See also: AWS API Documentation
Request Syntax
response = client.update_findings(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
Note={
'Text': 'string',
'UpdatedBy': 'string'
},
RecordState='ACTIVE'|'ARCHIVED'
)
[REQUIRED]
A collection of attributes that specify which findings you want to update.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Web Services account ID that a finding is generated in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Region from which the finding was generated.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAn ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's description.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe type of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe state of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the process.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe path to the process executable.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSpecifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services external Region name where this resource is located.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of Amazon Web Services tags associated with a resource at the time the finding was processed.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The instance type of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the principal that is associated with an IAM access key.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of an IAM user.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the container related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe veracity of a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe updated record state for the finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe text of a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding identifier of a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider value for the severity label.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider's original value for the severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceOne or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates whether or not sample findings are included in the filter results.
Boolean filter for querying findings.
The value of the boolean.
The updated note for the finding.
The updated note text.
The principal that updated the note.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_insight(**kwargs)¶Updates the Security Hub insight identified by the specified insight ARN.
See also: AWS API Documentation
Request Syntax
response = client.update_insight(
InsightArn='string',
Name='string',
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
GroupByAttribute='string'
)
[REQUIRED]
The ARN of the insight that you want to update.
The updated filters that define this insight.
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Web Services account ID that a finding is generated in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Region from which the finding was generated.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAn ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's description.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe type of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe state of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the process.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe path to the process executable.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSpecifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services external Region name where this resource is located.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of Amazon Web Services tags associated with a resource at the time the finding was processed.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The instance type of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the principal that is associated with an IAM access key.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of an IAM user.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the container related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe veracity of a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe updated record state for the finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe text of a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding identifier of a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider value for the severity label.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider's original value for the severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceOne or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates whether or not sample findings are included in the filter results.
Boolean filter for querying findings.
The value of the boolean.
GroupBy attribute that defines this insight.dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_organization_configuration(**kwargs)¶Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.
See also: AWS API Documentation
Request Syntax
response = client.update_organization_configuration(
AutoEnable=True|False,
AutoEnableStandards='NONE'|'DEFAULT'
)
[REQUIRED]
Whether to automatically enable Security Hub for new accounts in the organization.
By default, this is false , and new accounts are not added automatically.
To automatically enable Security Hub for new accounts, set this to true .
Whether to automatically enable Security Hub default standards for new member accounts in the organization.
By default, this parameter is equal to DEFAULT , and new member accounts are automatically enabled with default Security Hub standards.
To opt out of enabling default standards for new member accounts, set this parameter equal to NONE .
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionupdate_security_hub_configuration(**kwargs)¶Updates configuration options for Security Hub.
See also: AWS API Documentation
Request Syntax
response = client.update_security_hub_configuration(
AutoEnableControls=True|False
)
Whether to automatically enable new controls when they are added to standards that are enabled.
By default, this is set to true , and new controls are enabled automatically. To not automatically enable new controls, set this to false .
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.LimitExceededExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionupdate_standards_control(**kwargs)¶Used to control whether an individual security standard control is enabled or disabled.
See also: AWS API Documentation
Request Syntax
response = client.update_standards_control(
StandardsControlArn='string',
ControlStatus='ENABLED'|'DISABLED',
DisabledReason='string'
)
[REQUIRED]
The ARN of the security standard control to enable or disable.
dict
Response Syntax
{}
Response Structure
Exceptions
SecurityHub.Client.exceptions.InternalExceptionSecurityHub.Client.exceptions.InvalidInputExceptionSecurityHub.Client.exceptions.InvalidAccessExceptionSecurityHub.Client.exceptions.ResourceNotFoundExceptionThe available paginators are:
SecurityHub.Paginator.DescribeActionTargetsSecurityHub.Paginator.DescribeProductsSecurityHub.Paginator.DescribeStandardsSecurityHub.Paginator.DescribeStandardsControlsSecurityHub.Paginator.GetEnabledStandardsSecurityHub.Paginator.GetFindingsSecurityHub.Paginator.GetInsightsSecurityHub.Paginator.ListEnabledProductsForImportSecurityHub.Paginator.ListFindingAggregatorsSecurityHub.Paginator.ListInvitationsSecurityHub.Paginator.ListMembersSecurityHub.Paginator.ListOrganizationAdminAccountsSecurityHub.Paginator.DescribeActionTargets¶paginator = client.get_paginator('describe_action_targets')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.describe_action_targets().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ActionTargetArns=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A list of custom action target ARNs for the custom action targets to retrieve.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ActionTargets': [
{
'ActionTargetArn': 'string',
'Name': 'string',
'Description': 'string'
},
],
}
Response Structure
(dict) --
ActionTargets (list) --
A list of ActionTarget objects. Each object includes the ActionTargetArn , Description , and Name of a custom action target available in Security Hub.
(dict) --
An ActionTarget object.
ActionTargetArn (string) --
The ARN for the target action.
Name (string) --
The name of the action target.
Description (string) --
The description of the target action.
SecurityHub.Paginator.DescribeProducts¶paginator = client.get_paginator('describe_products')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.describe_products().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ProductArn='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Products': [
{
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Description': 'string',
'Categories': [
'string',
],
'IntegrationTypes': [
'SEND_FINDINGS_TO_SECURITY_HUB'|'RECEIVE_FINDINGS_FROM_SECURITY_HUB'|'UPDATE_FINDINGS_IN_SECURITY_HUB',
],
'MarketplaceUrl': 'string',
'ActivationUrl': 'string',
'ProductSubscriptionResourcePolicy': 'string'
},
],
}
Response Structure
(dict) --
Products (list) --
A list of products, including details for each product.
(dict) --
Contains details about a product.
ProductArn (string) --
The ARN assigned to the product.
ProductName (string) --
The name of the product.
CompanyName (string) --
The name of the company that provides the product.
Description (string) --
A description of the product.
Categories (list) --
The categories assigned to the product.
IntegrationTypes (list) --
The types of integration that the product supports. Available values are the following.
SEND_FINDINGS_TO_SECURITY_HUB - The integration sends findings to Security Hub.RECEIVE_FINDINGS_FROM_SECURITY_HUB - The integration receives findings from Security Hub.UPDATE_FINDINGS_IN_SECURITY_HUB - The integration does not send new findings to Security Hub, but does make updates to the findings that it receives from Security Hub.MarketplaceUrl (string) --
For integrations with Amazon Web Services services, the Amazon Web Services Console URL from which to activate the service.
For integrations with third-party products, the Amazon Web Services Marketplace URL from which to subscribe to or purchase the product.
ActivationUrl (string) --
The URL to the service or product documentation about the integration with Security Hub, including how to activate the integration.
ProductSubscriptionResourcePolicy (string) --
The resource policy associated with the product.
SecurityHub.Paginator.DescribeStandards¶paginator = client.get_paginator('describe_standards')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.describe_standards().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'Standards': [
{
'StandardsArn': 'string',
'Name': 'string',
'Description': 'string',
'EnabledByDefault': True|False
},
],
}
Response Structure
A list of available standards.
Provides information about a specific standard.
The ARN of a standard.
The name of the standard.
A description of the standard.
Whether the standard is enabled by default. When Security Hub is enabled from the console, if a standard is enabled by default, the check box for that standard is selected by default.
When Security Hub is enabled using the EnableSecurityHub API operation, the standard is enabled by default unless EnableDefaultStandards is set to false .
SecurityHub.Paginator.DescribeStandardsControls¶paginator = client.get_paginator('describe_standards_controls')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.describe_standards_controls().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StandardsSubscriptionArn='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The ARN of a resource that represents your subscription to a supported standard. To get the subscription ARNs of the standards you have enabled, use the GetEnabledStandards operation.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Controls': [
{
'StandardsControlArn': 'string',
'ControlStatus': 'ENABLED'|'DISABLED',
'DisabledReason': 'string',
'ControlStatusUpdatedAt': datetime(2015, 1, 1),
'ControlId': 'string',
'Title': 'string',
'Description': 'string',
'RemediationUrl': 'string',
'SeverityRating': 'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'RelatedRequirements': [
'string',
]
},
],
}
Response Structure
(dict) --
Controls (list) --
A list of security standards controls.
(dict) --
Details for an individual security standard control.
StandardsControlArn (string) --
The ARN of the security standard control.
ControlStatus (string) --
The current status of the security standard control. Indicates whether the control is enabled or disabled. Security Hub does not check against disabled controls.
DisabledReason (string) --
The reason provided for the most recent change in status for the control.
ControlStatusUpdatedAt (datetime) --
The date and time that the status of the security standard control was most recently updated.
ControlId (string) --
The identifier of the security standard control.
Title (string) --
The title of the security standard control.
Description (string) --
The longer description of the security standard control. Provides information about what the control is checking for.
RemediationUrl (string) --
A link to remediation information for the control in the Security Hub user documentation.
SeverityRating (string) --
The severity of findings generated from this security standard control.
The finding severity is based on an assessment of how easy it would be to compromise Amazon Web Services resources if the issue is detected.
RelatedRequirements (list) --
The list of requirements that are related to this control.
SecurityHub.Paginator.GetEnabledStandards¶paginator = client.get_paginator('get_enabled_standards')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.get_enabled_standards().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StandardsSubscriptionArns=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The list of the standards subscription ARNs for the standards to retrieve.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'StandardsSubscriptions': [
{
'StandardsSubscriptionArn': 'string',
'StandardsArn': 'string',
'StandardsInput': {
'string': 'string'
},
'StandardsStatus': 'PENDING'|'READY'|'FAILED'|'DELETING'|'INCOMPLETE',
'StandardsStatusReason': {
'StatusReasonCode': 'NO_AVAILABLE_CONFIGURATION_RECORDER'|'INTERNAL_ERROR'
}
},
],
}
Response Structure
(dict) --
StandardsSubscriptions (list) --
The list of StandardsSubscriptions objects that include information about the enabled standards.
(dict) --
A resource that represents your subscription to a supported standard.
StandardsSubscriptionArn (string) --
The ARN of a resource that represents your subscription to a supported standard.
StandardsArn (string) --
The ARN of a standard.
StandardsInput (dict) --
A key-value pair of input for the standard.
StandardsStatus (string) --
The status of the standard subscription.
The status values are as follows:
PENDING - Standard is in the process of being enabled.READY - Standard is enabled.INCOMPLETE - Standard could not be enabled completely. Some controls may not be available.DELETING - Standard is in the process of being disabled.FAILED - Standard could not be disabled.StandardsStatusReason (dict) --
The reason for the current status.
StatusReasonCode (string) --
The reason code that represents the reason for the current status of a standard subscription.
SecurityHub.Paginator.GetFindings¶paginator = client.get_paginator('get_findings')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.get_findings().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
Filters={
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
SortCriteria=[
{
'Field': 'string',
'SortOrder': 'asc'|'desc'
},
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The finding attributes used to define a condition to filter the returned findings.
You can filter by up to 10 finding attributes. For each attribute, you can provide up to 20 filter values.
Note that in the available filter fields, WorkflowState is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Web Services account ID that a finding is generated in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe security findings provider-specific identifier for a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Region from which the finding was generated.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding type in the format of namespace/category/classifier that classifies a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAn ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The native severity as defined by the security-findings provider's solution that generated the finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The normalized severity of a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The label of a finding's severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
A finding's title.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA finding's description.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe recommendation of what to do about the issue described in a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA URL that links to a page about the current finding in the security-findings provider's solution.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the findings provider (company) that owns the solution (product) that generates findings.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The name of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe type of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe filesystem path of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe state of the malware that was observed.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates the direction of network traffic associated with a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe protocol of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The source port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The source domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe source media access control (MAC) address of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe destination IPv4 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination IPv6 address of network-related information about a finding.
The IP filter for querying findings.
A finding's CIDR value.
The destination port of network-related information about a finding.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The destination domain of network-related information about a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the process.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe path to the process executable.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The parent process ID.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The date/time that the process was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The date/time that the process was terminated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The type of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe value of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe category of a threat intelligence indicator.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time of the last observation of a threat intelligence indicator.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe URL for more details from the source of the threat intelligence.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSpecifies the type of the resource that details are provided for.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical identifier for the given resource type.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services partition name that the Region is assigned to.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe canonical Amazon Web Services external Region name where this resource is located.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA list of Amazon Web Services tags associated with a resource at the time the finding was processed.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
The instance type of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe Amazon Machine Image (AMI) ID of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IPv4 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The IPv6 addresses associated with the instance.
The IP filter for querying findings.
A finding's CIDR value.
The key name associated with the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe IAM profile ARN of the instance.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the VPC that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the subnet that the instance was launched in.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date and time the instance was launched.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The canonical user ID of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe display name of the owner of the S3 bucket.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe user associated with the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the principal that is associated with an IAM access key.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the IAM access key related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe creation date/time of the IAM access key related to a finding.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The name of an IAM user.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the container related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe identifier of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe name of the image related to a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe date/time that the container was started.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The details of a resource that doesn't have a specific subfield for the resource type defined.
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe veracity of a finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe updated record state for the finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe solution-generated identifier for a related finding.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe text of a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe timestamp of when the note was updated.
A date filter for querying findings.
A start date for the date filter.
An end date for the date filter.
A date range for the date filter.
A date range value for the date filter.
A date range unit for the date filter.
The principal that created a note.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceA keyword for a finding.
A keyword filter for querying findings.
A value for the keyword.
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
A number filter for querying findings.
The greater-than-equal condition to be applied to a single field when querying for findings.
The less-than-equal condition to be applied to a single field when querying for findings.
The equal-to condition to be applied to a single field when querying for findings.
The finding identifier of a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe ARN of the solution that generated a related finding that is identified by the finding provider.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider value for the severity label.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThe finding provider's original value for the severity.
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceOne or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
A string filter for querying findings.
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceIndicates whether or not sample findings are included in the filter results.
Boolean filter for querying findings.
The value of the boolean.
The finding attributes used to sort the list of returned findings.
A collection of finding attributes used to sort findings.
The finding attribute used to sort findings.
The order used to sort findings.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Findings': [
{
'SchemaVersion': 'string',
'Id': 'string',
'ProductArn': 'string',
'ProductName': 'string',
'CompanyName': 'string',
'Region': 'string',
'GeneratorId': 'string',
'AwsAccountId': 'string',
'Types': [
'string',
],
'FirstObservedAt': 'string',
'LastObservedAt': 'string',
'CreatedAt': 'string',
'UpdatedAt': 'string',
'Severity': {
'Product': 123.0,
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Normalized': 123,
'Original': 'string'
},
'Confidence': 123,
'Criticality': 123,
'Title': 'string',
'Description': 'string',
'Remediation': {
'Recommendation': {
'Text': 'string',
'Url': 'string'
}
},
'SourceUrl': 'string',
'ProductFields': {
'string': 'string'
},
'UserDefinedFields': {
'string': 'string'
},
'Malware': [
{
'Name': 'string',
'Type': 'ADWARE'|'BLENDED_THREAT'|'BOTNET_AGENT'|'COIN_MINER'|'EXPLOIT_KIT'|'KEYLOGGER'|'MACRO'|'POTENTIALLY_UNWANTED'|'SPYWARE'|'RANSOMWARE'|'REMOTE_ACCESS'|'ROOTKIT'|'TROJAN'|'VIRUS'|'WORM',
'Path': 'string',
'State': 'OBSERVED'|'REMOVAL_FAILED'|'REMOVED'
},
],
'Network': {
'Direction': 'IN'|'OUT',
'Protocol': 'string',
'OpenPortRange': {
'Begin': 123,
'End': 123
},
'SourceIpV4': 'string',
'SourceIpV6': 'string',
'SourcePort': 123,
'SourceDomain': 'string',
'SourceMac': 'string',
'DestinationIpV4': 'string',
'DestinationIpV6': 'string',
'DestinationPort': 123,
'DestinationDomain': 'string'
},
'NetworkPath': [
{
'ComponentId': 'string',
'ComponentType': 'string',
'Egress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
},
'Ingress': {
'Protocol': 'string',
'Destination': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
},
'Source': {
'Address': [
'string',
],
'PortRanges': [
{
'Begin': 123,
'End': 123
},
]
}
}
},
],
'Process': {
'Name': 'string',
'Path': 'string',
'Pid': 123,
'ParentPid': 123,
'LaunchedAt': 'string',
'TerminatedAt': 'string'
},
'Threats': [
{
'Name': 'string',
'Severity': 'string',
'ItemCount': 123,
'FilePaths': [
{
'FilePath': 'string',
'FileName': 'string',
'ResourceId': 'string',
'Hash': 'string'
},
]
},
],
'ThreatIntelIndicators': [
{
'Type': 'DOMAIN'|'EMAIL_ADDRESS'|'HASH_MD5'|'HASH_SHA1'|'HASH_SHA256'|'HASH_SHA512'|'IPV4_ADDRESS'|'IPV6_ADDRESS'|'MUTEX'|'PROCESS'|'URL',
'Value': 'string',
'Category': 'BACKDOOR'|'CARD_STEALER'|'COMMAND_AND_CONTROL'|'DROP_SITE'|'EXPLOIT_SITE'|'KEYLOGGER',
'LastObservedAt': 'string',
'Source': 'string',
'SourceUrl': 'string'
},
],
'Resources': [
{
'Type': 'string',
'Id': 'string',
'Partition': 'aws'|'aws-cn'|'aws-us-gov',
'Region': 'string',
'ResourceRole': 'string',
'Tags': {
'string': 'string'
},
'DataClassification': {
'DetailedResultsLocation': 'string',
'Result': {
'MimeType': 'string',
'SizeClassified': 123,
'AdditionalOccurrences': True|False,
'Status': {
'Code': 'string',
'Reason': 'string'
},
'SensitiveData': [
{
'Category': 'string',
'Detections': [
{
'Count': 123,
'Type': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
},
],
'CustomDataIdentifiers': {
'Detections': [
{
'Count': 123,
'Arn': 'string',
'Name': 'string',
'Occurrences': {
'LineRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'OffsetRanges': [
{
'Start': 123,
'End': 123,
'StartColumn': 123
},
],
'Pages': [
{
'PageNumber': 123,
'LineRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
},
'OffsetRange': {
'Start': 123,
'End': 123,
'StartColumn': 123
}
},
],
'Records': [
{
'JsonPath': 'string',
'RecordIndex': 123
},
],
'Cells': [
{
'Column': 123,
'Row': 123,
'ColumnName': 'string',
'CellReference': 'string'
},
]
}
},
],
'TotalCount': 123
}
}
},
'Details': {
'AwsAutoScalingAutoScalingGroup': {
'LaunchConfigurationName': 'string',
'LoadBalancerNames': [
'string',
],
'HealthCheckType': 'string',
'HealthCheckGracePeriod': 123,
'CreatedTime': 'string',
'MixedInstancesPolicy': {
'InstancesDistribution': {
'OnDemandAllocationStrategy': 'string',
'OnDemandBaseCapacity': 123,
'OnDemandPercentageAboveBaseCapacity': 123,
'SpotAllocationStrategy': 'string',
'SpotInstancePools': 123,
'SpotMaxPrice': 'string'
},
'LaunchTemplate': {
'LaunchTemplateSpecification': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'Overrides': [
{
'InstanceType': 'string',
'WeightedCapacity': 'string'
},
]
}
},
'AvailabilityZones': [
{
'Value': 'string'
},
],
'LaunchTemplate': {
'LaunchTemplateId': 'string',
'LaunchTemplateName': 'string',
'Version': 'string'
},
'CapacityRebalance': True|False
},
'AwsCodeBuildProject': {
'EncryptionKey': 'string',
'Artifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
],
'Environment': {
'Certificate': 'string',
'EnvironmentVariables': [
{
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
],
'PrivilegedMode': True|False,
'ImagePullCredentialsType': 'string',
'RegistryCredential': {
'Credential': 'string',
'CredentialProvider': 'string'
},
'Type': 'string'
},
'Name': 'string',
'Source': {
'Type': 'string',
'Location': 'string',
'GitCloneDepth': 123,
'InsecureSsl': True|False
},
'ServiceRole': 'string',
'LogsConfig': {
'CloudWatchLogs': {
'GroupName': 'string',
'Status': 'string',
'StreamName': 'string'
},
'S3Logs': {
'EncryptionDisabled': True|False,
'Location': 'string',
'Status': 'string'
}
},
'VpcConfig': {
'VpcId': 'string',
'Subnets': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'SecondaryArtifacts': [
{
'ArtifactIdentifier': 'string',
'EncryptionDisabled': True|False,
'Location': 'string',
'Name': 'string',
'NamespaceType': 'string',
'OverrideArtifactName': True|False,
'Packaging': 'string',
'Path': 'string',
'Type': 'string'
},
]
},
'AwsCloudFrontDistribution': {
'CacheBehaviors': {
'Items': [
{
'ViewerProtocolPolicy': 'string'
},
]
},
'DefaultCacheBehavior': {
'ViewerProtocolPolicy': 'string'
},
'DefaultRootObject': 'string',
'DomainName': 'string',
'ETag': 'string',
'LastModifiedTime': 'string',
'Logging': {
'Bucket': 'string',
'Enabled': True|False,
'IncludeCookies': True|False,
'Prefix': 'string'
},
'Origins': {
'Items': [
{
'DomainName': 'string',
'Id': 'string',
'OriginPath': 'string',
'S3OriginConfig': {
'OriginAccessIdentity': 'string'
},
'CustomOriginConfig': {
'HttpPort': 123,
'HttpsPort': 123,
'OriginKeepaliveTimeout': 123,
'OriginProtocolPolicy': 'string',
'OriginReadTimeout': 123,
'OriginSslProtocols': {
'Items': [
'string',
],
'Quantity': 123
}
}
},
]
},
'OriginGroups': {
'Items': [
{
'FailoverCriteria': {
'StatusCodes': {
'Items': [
123,
],
'Quantity': 123
}
}
},
]
},
'ViewerCertificate': {
'AcmCertificateArn': 'string',
'Certificate': 'string',
'CertificateSource': 'string',
'CloudFrontDefaultCertificate': True|False,
'IamCertificateId': 'string',
'MinimumProtocolVersion': 'string',
'SslSupportMethod': 'string'
},
'Status': 'string',
'WebAclId': 'string'
},
'AwsEc2Instance': {
'Type': 'string',
'ImageId': 'string',
'IpV4Addresses': [
'string',
],
'IpV6Addresses': [
'string',
],
'KeyName': 'string',
'IamInstanceProfileArn': 'string',
'VpcId': 'string',
'SubnetId': 'string',
'LaunchedAt': 'string',
'NetworkInterfaces': [
{
'NetworkInterfaceId': 'string'
},
],
'VirtualizationType': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpProtocolIpv6': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string',
'InstanceMetadataTags': 'string'
}
},
'AwsEc2NetworkInterface': {
'Attachment': {
'AttachTime': 'string',
'AttachmentId': 'string',
'DeleteOnTermination': True|False,
'DeviceIndex': 123,
'InstanceId': 'string',
'InstanceOwnerId': 'string',
'Status': 'string'
},
'NetworkInterfaceId': 'string',
'SecurityGroups': [
{
'GroupName': 'string',
'GroupId': 'string'
},
],
'SourceDestCheck': True|False,
'IpV6Addresses': [
{
'IpV6Address': 'string'
},
],
'PrivateIpAddresses': [
{
'PrivateIpAddress': 'string',
'PrivateDnsName': 'string'
},
],
'PublicDnsName': 'string',
'PublicIp': 'string'
},
'AwsEc2SecurityGroup': {
'GroupName': 'string',
'GroupId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'IpPermissions': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
],
'IpPermissionsEgress': [
{
'IpProtocol': 'string',
'FromPort': 123,
'ToPort': 123,
'UserIdGroupPairs': [
{
'GroupId': 'string',
'GroupName': 'string',
'PeeringStatus': 'string',
'UserId': 'string',
'VpcId': 'string',
'VpcPeeringConnectionId': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string'
},
],
'Ipv6Ranges': [
{
'CidrIpv6': 'string'
},
],
'PrefixListIds': [
{
'PrefixListId': 'string'
},
]
},
]
},
'AwsEc2Volume': {
'CreateTime': 'string',
'DeviceName': 'string',
'Encrypted': True|False,
'Size': 123,
'SnapshotId': 'string',
'Status': 'string',
'KmsKeyId': 'string',
'Attachments': [
{
'AttachTime': 'string',
'DeleteOnTermination': True|False,
'InstanceId': 'string',
'Status': 'string'
},
],
'VolumeId': 'string',
'VolumeType': 'string',
'VolumeScanStatus': 'string'
},
'AwsEc2Vpc': {
'CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
],
'DhcpOptionsId': 'string',
'State': 'string'
},
'AwsEc2Eip': {
'InstanceId': 'string',
'PublicIp': 'string',
'AllocationId': 'string',
'AssociationId': 'string',
'Domain': 'string',
'PublicIpv4Pool': 'string',
'NetworkBorderGroup': 'string',
'NetworkInterfaceId': 'string',
'NetworkInterfaceOwnerId': 'string',
'PrivateIpAddress': 'string'
},
'AwsEc2Subnet': {
'AssignIpv6AddressOnCreation': True|False,
'AvailabilityZone': 'string',
'AvailabilityZoneId': 'string',
'AvailableIpAddressCount': 123,
'CidrBlock': 'string',
'DefaultForAz': True|False,
'MapPublicIpOnLaunch': True|False,
'OwnerId': 'string',
'State': 'string',
'SubnetArn': 'string',
'SubnetId': 'string',
'VpcId': 'string',
'Ipv6CidrBlockAssociationSet': [
{
'AssociationId': 'string',
'Ipv6CidrBlock': 'string',
'CidrBlockState': 'string'
},
]
},
'AwsEc2NetworkAcl': {
'IsDefault': True|False,
'NetworkAclId': 'string',
'OwnerId': 'string',
'VpcId': 'string',
'Associations': [
{
'NetworkAclAssociationId': 'string',
'NetworkAclId': 'string',
'SubnetId': 'string'
},
],
'Entries': [
{
'CidrBlock': 'string',
'Egress': True|False,
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Ipv6CidrBlock': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'Protocol': 'string',
'RuleAction': 'string',
'RuleNumber': 123
},
]
},
'AwsElbv2LoadBalancer': {
'AvailabilityZones': [
{
'ZoneName': 'string',
'SubnetId': 'string'
},
],
'CanonicalHostedZoneId': 'string',
'CreatedTime': 'string',
'DNSName': 'string',
'IpAddressType': 'string',
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'State': {
'Code': 'string',
'Reason': 'string'
},
'Type': 'string',
'VpcId': 'string',
'LoadBalancerAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'AwsElasticBeanstalkEnvironment': {
'ApplicationName': 'string',
'Cname': 'string',
'DateCreated': 'string',
'DateUpdated': 'string',
'Description': 'string',
'EndpointUrl': 'string',
'EnvironmentArn': 'string',
'EnvironmentId': 'string',
'EnvironmentLinks': [
{
'EnvironmentName': 'string',
'LinkName': 'string'
},
],
'EnvironmentName': 'string',
'OptionSettings': [
{
'Namespace': 'string',
'OptionName': 'string',
'ResourceName': 'string',
'Value': 'string'
},
],
'PlatformArn': 'string',
'SolutionStackName': 'string',
'Status': 'string',
'Tier': {
'Name': 'string',
'Type': 'string',
'Version': 'string'
},
'VersionLabel': 'string'
},
'AwsElasticsearchDomain': {
'AccessPolicies': 'string',
'DomainEndpointOptions': {
'EnforceHTTPS': True|False,
'TLSSecurityPolicy': 'string'
},
'DomainId': 'string',
'DomainName': 'string',
'Endpoint': 'string',
'Endpoints': {
'string': 'string'
},
'ElasticsearchVersion': 'string',
'ElasticsearchClusterConfig': {
'DedicatedMasterCount': 123,
'DedicatedMasterEnabled': True|False,
'DedicatedMasterType': 'string',
'InstanceCount': 123,
'InstanceType': 'string',
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'ZoneAwarenessEnabled': True|False
},
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string'
},
'VPCOptions': {
'AvailabilityZones': [
'string',
],
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VPCId': 'string'
}
},
'AwsS3Bucket': {
'OwnerId': 'string',
'OwnerName': 'string',
'OwnerAccountId': 'string',
'CreatedAt': 'string',
'ServerSideEncryptionConfiguration': {
'Rules': [
{
'ApplyServerSideEncryptionByDefault': {
'SSEAlgorithm': 'string',
'KMSMasterKeyID': 'string'
}
},
]
},
'BucketLifecycleConfiguration': {
'Rules': [
{
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
},
'ExpirationDate': 'string',
'ExpirationInDays': 123,
'ExpiredObjectDeleteMarker': True|False,
'Filter': {
'Predicate': {
'Operands': [
{
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
},
],
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'Type': 'string'
}
},
'ID': 'string',
'NoncurrentVersionExpirationInDays': 123,
'NoncurrentVersionTransitions': [
{
'Days': 123,
'StorageClass': 'string'
},
],
'Prefix': 'string',
'Status': 'string',
'Transitions': [
{
'Date': 'string',
'Days': 123,
'StorageClass': 'string'
},
]
},
]
},
'PublicAccessBlockConfiguration': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AccessControlList': 'string',
'BucketLoggingConfiguration': {
'DestinationBucketName': 'string',
'LogFilePrefix': 'string'
},
'BucketWebsiteConfiguration': {
'ErrorDocument': 'string',
'IndexDocumentSuffix': 'string',
'RedirectAllRequestsTo': {
'Hostname': 'string',
'Protocol': 'string'
},
'RoutingRules': [
{
'Condition': {
'HttpErrorCodeReturnedEquals': 'string',
'KeyPrefixEquals': 'string'
},
'Redirect': {
'Hostname': 'string',
'HttpRedirectCode': 'string',
'Protocol': 'string',
'ReplaceKeyPrefixWith': 'string',
'ReplaceKeyWith': 'string'
}
},
]
},
'BucketNotificationConfiguration': {
'Configurations': [
{
'Events': [
'string',
],
'Filter': {
'S3KeyFilter': {
'FilterRules': [
{
'Name': 'Prefix'|'Suffix',
'Value': 'string'
},
]
}
},
'Destination': 'string',
'Type': 'string'
},
]
},
'BucketVersioningConfiguration': {
'IsMfaDeleteEnabled': True|False,
'Status': 'string'
}
},
'AwsS3AccountPublicAccessBlock': {
'BlockPublicAcls': True|False,
'BlockPublicPolicy': True|False,
'IgnorePublicAcls': True|False,
'RestrictPublicBuckets': True|False
},
'AwsS3Object': {
'LastModified': 'string',
'ETag': 'string',
'VersionId': 'string',
'ContentType': 'string',
'ServerSideEncryption': 'string',
'SSEKMSKeyId': 'string'
},
'AwsSecretsManagerSecret': {
'RotationRules': {
'AutomaticallyAfterDays': 123
},
'RotationOccurredWithinFrequency': True|False,
'KmsKeyId': 'string',
'RotationEnabled': True|False,
'RotationLambdaArn': 'string',
'Deleted': True|False,
'Name': 'string',
'Description': 'string'
},
'AwsIamAccessKey': {
'UserName': 'string',
'Status': 'Active'|'Inactive',
'CreatedAt': 'string',
'PrincipalId': 'string',
'PrincipalType': 'string',
'PrincipalName': 'string',
'AccountId': 'string',
'AccessKeyId': 'string',
'SessionContext': {
'Attributes': {
'MfaAuthenticated': True|False,
'CreationDate': 'string'
},
'SessionIssuer': {
'Type': 'string',
'PrincipalId': 'string',
'Arn': 'string',
'AccountId': 'string',
'UserName': 'string'
}
}
},
'AwsIamUser': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupList': [
'string',
],
'Path': 'string',
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'UserId': 'string',
'UserName': 'string',
'UserPolicyList': [
{
'PolicyName': 'string'
},
]
},
'AwsIamPolicy': {
'AttachmentCount': 123,
'CreateDate': 'string',
'DefaultVersionId': 'string',
'Description': 'string',
'IsAttachable': True|False,
'Path': 'string',
'PermissionsBoundaryUsageCount': 123,
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyVersionList': [
{
'VersionId': 'string',
'IsDefaultVersion': True|False,
'CreateDate': 'string'
},
],
'UpdateDate': 'string'
},
'AwsApiGatewayV2Stage': {
'ClientCertificateId': 'string',
'CreatedDate': 'string',
'Description': 'string',
'DefaultRouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'DeploymentId': 'string',
'LastUpdatedDate': 'string',
'RouteSettings': {
'DetailedMetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0
},
'StageName': 'string',
'StageVariables': {
'string': 'string'
},
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'AutoDeploy': True|False,
'LastDeploymentStatusMessage': 'string',
'ApiGatewayManaged': True|False
},
'AwsApiGatewayV2Api': {
'ApiEndpoint': 'string',
'ApiId': 'string',
'ApiKeySelectionExpression': 'string',
'CreatedDate': 'string',
'Description': 'string',
'Version': 'string',
'Name': 'string',
'ProtocolType': 'string',
'RouteSelectionExpression': 'string',
'CorsConfiguration': {
'AllowOrigins': [
'string',
],
'AllowCredentials': True|False,
'ExposeHeaders': [
'string',
],
'MaxAge': 123,
'AllowMethods': [
'string',
],
'AllowHeaders': [
'string',
]
}
},
'AwsDynamoDbTable': {
'AttributeDefinitions': [
{
'AttributeName': 'string',
'AttributeType': 'string'
},
],
'BillingModeSummary': {
'BillingMode': 'string',
'LastUpdateToPayPerRequestDateTime': 'string'
},
'CreationDateTime': 'string',
'GlobalSecondaryIndexes': [
{
'Backfilling': True|False,
'IndexArn': 'string',
'IndexName': 'string',
'IndexSizeBytes': 123,
'IndexStatus': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
},
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
}
},
],
'GlobalTableVersion': 'string',
'ItemCount': 123,
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'LatestStreamArn': 'string',
'LatestStreamLabel': 'string',
'LocalSecondaryIndexes': [
{
'IndexArn': 'string',
'IndexName': 'string',
'KeySchema': [
{
'AttributeName': 'string',
'KeyType': 'string'
},
],
'Projection': {
'NonKeyAttributes': [
'string',
],
'ProjectionType': 'string'
}
},
],
'ProvisionedThroughput': {
'LastDecreaseDateTime': 'string',
'LastIncreaseDateTime': 'string',
'NumberOfDecreasesToday': 123,
'ReadCapacityUnits': 123,
'WriteCapacityUnits': 123
},
'Replicas': [
{
'GlobalSecondaryIndexes': [
{
'IndexName': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
}
},
],
'KmsMasterKeyId': 'string',
'ProvisionedThroughputOverride': {
'ReadCapacityUnits': 123
},
'RegionName': 'string',
'ReplicaStatus': 'string',
'ReplicaStatusDescription': 'string'
},
],
'RestoreSummary': {
'SourceBackupArn': 'string',
'SourceTableArn': 'string',
'RestoreDateTime': 'string',
'RestoreInProgress': True|False
},
'SseDescription': {
'InaccessibleEncryptionDateTime': 'string',
'Status': 'string',
'SseType': 'string',
'KmsMasterKeyArn': 'string'
},
'StreamSpecification': {
'StreamEnabled': True|False,
'StreamViewType': 'string'
},
'TableId': 'string',
'TableName': 'string',
'TableSizeBytes': 123,
'TableStatus': 'string'
},
'AwsApiGatewayStage': {
'DeploymentId': 'string',
'ClientCertificateId': 'string',
'StageName': 'string',
'Description': 'string',
'CacheClusterEnabled': True|False,
'CacheClusterSize': 'string',
'CacheClusterStatus': 'string',
'MethodSettings': [
{
'MetricsEnabled': True|False,
'LoggingLevel': 'string',
'DataTraceEnabled': True|False,
'ThrottlingBurstLimit': 123,
'ThrottlingRateLimit': 123.0,
'CachingEnabled': True|False,
'CacheTtlInSeconds': 123,
'CacheDataEncrypted': True|False,
'RequireAuthorizationForCacheControl': True|False,
'UnauthorizedCacheControlHeaderStrategy': 'string',
'HttpMethod': 'string',
'ResourcePath': 'string'
},
],
'Variables': {
'string': 'string'
},
'DocumentationVersion': 'string',
'AccessLogSettings': {
'Format': 'string',
'DestinationArn': 'string'
},
'CanarySettings': {
'PercentTraffic': 123.0,
'DeploymentId': 'string',
'StageVariableOverrides': {
'string': 'string'
},
'UseStageCache': True|False
},
'TracingEnabled': True|False,
'CreatedDate': 'string',
'LastUpdatedDate': 'string',
'WebAclArn': 'string'
},
'AwsApiGatewayRestApi': {
'Id': 'string',
'Name': 'string',
'Description': 'string',
'CreatedDate': 'string',
'Version': 'string',
'BinaryMediaTypes': [
'string',
],
'MinimumCompressionSize': 123,
'ApiKeySource': 'string',
'EndpointConfiguration': {
'Types': [
'string',
]
}
},
'AwsCloudTrailTrail': {
'CloudWatchLogsLogGroupArn': 'string',
'CloudWatchLogsRoleArn': 'string',
'HasCustomEventSelectors': True|False,
'HomeRegion': 'string',
'IncludeGlobalServiceEvents': True|False,
'IsMultiRegionTrail': True|False,
'IsOrganizationTrail': True|False,
'KmsKeyId': 'string',
'LogFileValidationEnabled': True|False,
'Name': 'string',
'S3BucketName': 'string',
'S3KeyPrefix': 'string',
'SnsTopicArn': 'string',
'SnsTopicName': 'string',
'TrailArn': 'string'
},
'AwsSsmPatchCompliance': {
'Patch': {
'ComplianceSummary': {
'Status': 'string',
'CompliantCriticalCount': 123,
'CompliantHighCount': 123,
'CompliantMediumCount': 123,
'ExecutionType': 'string',
'NonCompliantCriticalCount': 123,
'CompliantInformationalCount': 123,
'NonCompliantInformationalCount': 123,
'CompliantUnspecifiedCount': 123,
'NonCompliantLowCount': 123,
'NonCompliantHighCount': 123,
'CompliantLowCount': 123,
'ComplianceType': 'string',
'PatchBaselineId': 'string',
'OverallSeverity': 'string',
'NonCompliantMediumCount': 123,
'NonCompliantUnspecifiedCount': 123,
'PatchGroup': 'string'
}
}
},
'AwsCertificateManagerCertificate': {
'CertificateAuthorityArn': 'string',
'CreatedAt': 'string',
'DomainName': 'string',
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'ExtendedKeyUsages': [
{
'Name': 'string',
'OId': 'string'
},
],
'FailureReason': 'string',
'ImportedAt': 'string',
'InUseBy': [
'string',
],
'IssuedAt': 'string',
'Issuer': 'string',
'KeyAlgorithm': 'string',
'KeyUsages': [
{
'Name': 'string'
},
],
'NotAfter': 'string',
'NotBefore': 'string',
'Options': {
'CertificateTransparencyLoggingPreference': 'string'
},
'RenewalEligibility': 'string',
'RenewalSummary': {
'DomainValidationOptions': [
{
'DomainName': 'string',
'ResourceRecord': {
'Name': 'string',
'Type': 'string',
'Value': 'string'
},
'ValidationDomain': 'string',
'ValidationEmails': [
'string',
],
'ValidationMethod': 'string',
'ValidationStatus': 'string'
},
],
'RenewalStatus': 'string',
'RenewalStatusReason': 'string',
'UpdatedAt': 'string'
},
'Serial': 'string',
'SignatureAlgorithm': 'string',
'Status': 'string',
'Subject': 'string',
'SubjectAlternativeNames': [
'string',
],
'Type': 'string'
},
'AwsRedshiftCluster': {
'AllowVersionUpgrade': True|False,
'AutomatedSnapshotRetentionPeriod': 123,
'AvailabilityZone': 'string',
'ClusterAvailabilityStatus': 'string',
'ClusterCreateTime': 'string',
'ClusterIdentifier': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIpAddress': 'string',
'PublicIpAddress': 'string'
},
],
'ClusterParameterGroups': [
{
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
],
'ParameterApplyStatus': 'string',
'ParameterGroupName': 'string'
},
],
'ClusterPublicKey': 'string',
'ClusterRevisionNumber': 'string',
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'ManualSnapshotRetentionPeriod': 123,
'RetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterStatus': 'string',
'ClusterSubnetGroupName': 'string',
'ClusterVersion': 'string',
'DBName': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceEndTime': 'string',
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ElasticResizeNumberOfNodeOptions': 'string',
'Encrypted': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123
},
'EnhancedVpcRouting': True|False,
'ExpectedNextSnapshotScheduleTime': 'string',
'ExpectedNextSnapshotScheduleTimeStatus': 'string',
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'IamRoles': [
{
'ApplyStatus': 'string',
'IamRoleArn': 'string'
},
],
'KmsKeyId': 'string',
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'MasterUsername': 'string',
'NextMaintenanceWindowStartTime': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PendingActions': [
'string',
],
'PendingModifiedValues': {
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'ClusterType': 'string',
'ClusterVersion': 'string',
'EncryptionType': 'string',
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'PubliclyAccessible': True|False
},
'PreferredMaintenanceWindow': 'string',
'PubliclyAccessible': True|False,
'ResizeInfo': {
'AllowCancelResize': True|False,
'ResizeType': 'string'
},
'RestoreStatus': {
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ProgressInMegaBytes': 123,
'SnapshotSizeInMegaBytes': 123,
'Status': 'string'
},
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'string',
'VpcId': 'string',
'VpcSecurityGroups': [
{
'Status': 'string',
'VpcSecurityGroupId': 'string'
},
],
'LoggingStatus': {
'BucketName': 'string',
'LastFailureMessage': 'string',
'LastFailureTime': 'string',
'LastSuccessfulDeliveryTime': 'string',
'LoggingEnabled': True|False,
'S3KeyPrefix': 'string'
}
},
'AwsElbLoadBalancer': {
'AvailabilityZones': [
'string',
],
'BackendServerDescriptions': [
{
'InstancePort': 123,
'PolicyNames': [
'string',
]
},
],
'CanonicalHostedZoneName': 'string',
'CanonicalHostedZoneNameID': 'string',
'CreatedTime': 'string',
'DnsName': 'string',
'HealthCheck': {
'HealthyThreshold': 123,
'Interval': 123,
'Target': 'string',
'Timeout': 123,
'UnhealthyThreshold': 123
},
'Instances': [
{
'InstanceId': 'string'
},
],
'ListenerDescriptions': [
{
'Listener': {
'InstancePort': 123,
'InstanceProtocol': 'string',
'LoadBalancerPort': 123,
'Protocol': 'string',
'SslCertificateId': 'string'
},
'PolicyNames': [
'string',
]
},
],
'LoadBalancerAttributes': {
'AccessLog': {
'EmitInterval': 123,
'Enabled': True|False,
'S3BucketName': 'string',
'S3BucketPrefix': 'string'
},
'ConnectionDraining': {
'Enabled': True|False,
'Timeout': 123
},
'ConnectionSettings': {
'IdleTimeout': 123
},
'CrossZoneLoadBalancing': {
'Enabled': True|False
},
'AdditionalAttributes': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'LoadBalancerName': 'string',
'Policies': {
'AppCookieStickinessPolicies': [
{
'CookieName': 'string',
'PolicyName': 'string'
},
],
'LbCookieStickinessPolicies': [
{
'CookieExpirationPeriod': 123,
'PolicyName': 'string'
},
],
'OtherPolicies': [
'string',
]
},
'Scheme': 'string',
'SecurityGroups': [
'string',
],
'SourceSecurityGroup': {
'GroupName': 'string',
'OwnerAlias': 'string'
},
'Subnets': [
'string',
],
'VpcId': 'string'
},
'AwsIamGroup': {
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'GroupId': 'string',
'GroupName': 'string',
'GroupPolicyList': [
{
'PolicyName': 'string'
},
],
'Path': 'string'
},
'AwsIamRole': {
'AssumeRolePolicyDocument': 'string',
'AttachedManagedPolicies': [
{
'PolicyName': 'string',
'PolicyArn': 'string'
},
],
'CreateDate': 'string',
'InstanceProfileList': [
{
'Arn': 'string',
'CreateDate': 'string',
'InstanceProfileId': 'string',
'InstanceProfileName': 'string',
'Path': 'string',
'Roles': [
{
'Arn': 'string',
'AssumeRolePolicyDocument': 'string',
'CreateDate': 'string',
'Path': 'string',
'RoleId': 'string',
'RoleName': 'string'
},
]
},
],
'PermissionsBoundary': {
'PermissionsBoundaryArn': 'string',
'PermissionsBoundaryType': 'string'
},
'RoleId': 'string',
'RoleName': 'string',
'RolePolicyList': [
{
'PolicyName': 'string'
},
],
'MaxSessionDuration': 123,
'Path': 'string'
},
'AwsKmsKey': {
'AWSAccountId': 'string',
'CreationDate': 123.0,
'KeyId': 'string',
'KeyManager': 'string',
'KeyState': 'string',
'Origin': 'string',
'Description': 'string',
'KeyRotationStatus': True|False
},
'AwsLambdaFunction': {
'Code': {
'S3Bucket': 'string',
'S3Key': 'string',
'S3ObjectVersion': 'string',
'ZipFile': 'string'
},
'CodeSha256': 'string',
'DeadLetterConfig': {
'TargetArn': 'string'
},
'Environment': {
'Variables': {
'string': 'string'
},
'Error': {
'ErrorCode': 'string',
'Message': 'string'
}
},
'FunctionName': 'string',
'Handler': 'string',
'KmsKeyArn': 'string',
'LastModified': 'string',
'Layers': [
{
'Arn': 'string',
'CodeSize': 123
},
],
'MasterArn': 'string',
'MemorySize': 123,
'RevisionId': 'string',
'Role': 'string',
'Runtime': 'string',
'Timeout': 123,
'TracingConfig': {
'Mode': 'string'
},
'VpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
],
'VpcId': 'string'
},
'Version': 'string'
},
'AwsLambdaLayerVersion': {
'Version': 123,
'CompatibleRuntimes': [
'string',
],
'CreatedDate': 'string'
},
'AwsRdsDbInstance': {
'AssociatedRoles': [
{
'RoleArn': 'string',
'FeatureName': 'string',
'Status': 'string'
},
],
'CACertificateIdentifier': 'string',
'DBClusterIdentifier': 'string',
'DBInstanceIdentifier': 'string',
'DBInstanceClass': 'string',
'DbInstancePort': 123,
'DbiResourceId': 'string',
'DBName': 'string',
'DeletionProtection': True|False,
'Endpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'Engine': 'string',
'EngineVersion': 'string',
'IAMDatabaseAuthenticationEnabled': True|False,
'InstanceCreateTime': 'string',
'KmsKeyId': 'string',
'PubliclyAccessible': True|False,
'StorageEncrypted': True|False,
'TdeCredentialArn': 'string',
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'MultiAz': True|False,
'EnhancedMonitoringResourceArn': 'string',
'DbInstanceStatus': 'string',
'MasterUsername': 'string',
'AllocatedStorage': 123,
'PreferredBackupWindow': 'string',
'BackupRetentionPeriod': 123,
'DbSecurityGroups': [
'string',
],
'DbParameterGroups': [
{
'DbParameterGroupName': 'string',
'ParameterApplyStatus': 'string'
},
],
'AvailabilityZone': 'string',
'DbSubnetGroup': {
'DbSubnetGroupName': 'string',
'DbSubnetGroupDescription': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string'
},
'SubnetStatus': 'string'
},
],
'DbSubnetGroupArn': 'string'
},
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'DbInstanceClass': 'string',
'AllocatedStorage': 123,
'MasterUserPassword': 'string',
'Port': 123,
'BackupRetentionPeriod': 123,
'MultiAZ': True|False,
'EngineVersion': 'string',
'LicenseModel': 'string',
'Iops': 123,
'DbInstanceIdentifier': 'string',
'StorageType': 'string',
'CaCertificateIdentifier': 'string',
'DbSubnetGroupName': 'string',
'PendingCloudWatchLogsExports': {
'LogTypesToEnable': [
'string',
],
'LogTypesToDisable': [
'string',
]
},
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
]
},
'LatestRestorableTime': 'string',
'AutoMinorVersionUpgrade': True|False,
'ReadReplicaSourceDBInstanceIdentifier': 'string',
'ReadReplicaDBInstanceIdentifiers': [
'string',
],
'ReadReplicaDBClusterIdentifiers': [
'string',
],
'LicenseModel': 'string',
'Iops': 123,
'OptionGroupMemberships': [
{
'OptionGroupName': 'string',
'Status': 'string'
},
],
'CharacterSetName': 'string',
'SecondaryAvailabilityZone': 'string',
'StatusInfos': [
{
'StatusType': 'string',
'Normal': True|False,
'Status': 'string',
'Message': 'string'
},
],
'StorageType': 'string',
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'CopyTagsToSnapshot': True|False,
'MonitoringInterval': 123,
'MonitoringRoleArn': 'string',
'PromotionTier': 123,
'Timezone': 'string',
'PerformanceInsightsEnabled': True|False,
'PerformanceInsightsKmsKeyId': 'string',
'PerformanceInsightsRetentionPeriod': 123,
'EnabledCloudWatchLogsExports': [
'string',
],
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'ListenerEndpoint': {
'Address': 'string',
'Port': 123,
'HostedZoneId': 'string'
},
'MaxAllocatedStorage': 123
},
'AwsSnsTopic': {
'KmsMasterKeyId': 'string',
'Subscription': [
{
'Endpoint': 'string',
'Protocol': 'string'
},
],
'TopicName': 'string',
'Owner': 'string',
'SqsSuccessFeedbackRoleArn': 'string',
'SqsFailureFeedbackRoleArn': 'string',
'ApplicationSuccessFeedbackRoleArn': 'string',
'FirehoseSuccessFeedbackRoleArn': 'string',
'FirehoseFailureFeedbackRoleArn': 'string',
'HttpSuccessFeedbackRoleArn': 'string',
'HttpFailureFeedbackRoleArn': 'string'
},
'AwsSqsQueue': {
'KmsDataKeyReusePeriodSeconds': 123,
'KmsMasterKeyId': 'string',
'QueueName': 'string',
'DeadLetterTargetArn': 'string'
},
'AwsWafWebAcl': {
'Name': 'string',
'DefaultAction': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'ExcludedRules': [
{
'RuleId': 'string'
},
],
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsRdsDbSnapshot': {
'DbSnapshotIdentifier': 'string',
'DbInstanceIdentifier': 'string',
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'VpcId': 'string',
'InstanceCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'Iops': 123,
'OptionGroupName': 'string',
'PercentProgress': 123,
'SourceRegion': 'string',
'SourceDbSnapshotIdentifier': 'string',
'StorageType': 'string',
'TdeCredentialArn': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'Timezone': 'string',
'IamDatabaseAuthenticationEnabled': True|False,
'ProcessorFeatures': [
{
'Name': 'string',
'Value': 'string'
},
],
'DbiResourceId': 'string'
},
'AwsRdsDbClusterSnapshot': {
'AvailabilityZones': [
'string',
],
'SnapshotCreateTime': 'string',
'Engine': 'string',
'AllocatedStorage': 123,
'Status': 'string',
'Port': 123,
'VpcId': 'string',
'ClusterCreateTime': 'string',
'MasterUsername': 'string',
'EngineVersion': 'string',
'LicenseModel': 'string',
'SnapshotType': 'string',
'PercentProgress': 123,
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterIdentifier': 'string',
'DbClusterSnapshotIdentifier': 'string',
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsRdsDbCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'DatabaseName': 'string',
'Status': 'string',
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'CustomEndpoints': [
'string',
],
'MultiAz': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'Port': 123,
'MasterUsername': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'ClusterCreateTime': 'string',
'EnabledCloudWatchLogsExports': [
'string',
],
'EngineMode': 'string',
'DeletionProtection': True|False,
'HttpEndpointEnabled': True|False,
'ActivityStreamStatus': 'string',
'CopyTagsToSnapshot': True|False,
'CrossAccountClone': True|False,
'DomainMemberships': [
{
'Domain': 'string',
'Status': 'string',
'Fqdn': 'string',
'IamRoleName': 'string'
},
],
'DbClusterParameterGroup': 'string',
'DbSubnetGroup': 'string',
'DbClusterOptionGroupMemberships': [
{
'DbClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'DbClusterIdentifier': 'string',
'DbClusterMembers': [
{
'IsClusterWriter': True|False,
'PromotionTier': 123,
'DbInstanceIdentifier': 'string',
'DbClusterParameterGroupStatus': 'string'
},
],
'IamDatabaseAuthenticationEnabled': True|False
},
'AwsEcsCluster': {
'ClusterArn': 'string',
'ActiveServicesCount': 123,
'CapacityProviders': [
'string',
],
'ClusterSettings': [
{
'Name': 'string',
'Value': 'string'
},
],
'Configuration': {
'ExecuteCommandConfiguration': {
'KmsKeyId': 'string',
'LogConfiguration': {
'CloudWatchEncryptionEnabled': True|False,
'CloudWatchLogGroupName': 'string',
'S3BucketName': 'string',
'S3EncryptionEnabled': True|False,
'S3KeyPrefix': 'string'
},
'Logging': 'string'
}
},
'DefaultCapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'ClusterName': 'string',
'RegisteredContainerInstancesCount': 123,
'RunningTasksCount': 123,
'Status': 'string'
},
'AwsEcsContainer': {
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
'AwsEcsTaskDefinition': {
'ContainerDefinitions': [
{
'Command': [
'string',
],
'Cpu': 123,
'DependsOn': [
{
'Condition': 'string',
'ContainerName': 'string'
},
],
'DisableNetworking': True|False,
'DnsSearchDomains': [
'string',
],
'DnsServers': [
'string',
],
'DockerLabels': {
'string': 'string'
},
'DockerSecurityOptions': [
'string',
],
'EntryPoint': [
'string',
],
'Environment': [
{
'Name': 'string',
'Value': 'string'
},
],
'EnvironmentFiles': [
{
'Type': 'string',
'Value': 'string'
},
],
'Essential': True|False,
'ExtraHosts': [
{
'Hostname': 'string',
'IpAddress': 'string'
},
],
'FirelensConfiguration': {
'Options': {
'string': 'string'
},
'Type': 'string'
},
'HealthCheck': {
'Command': [
'string',
],
'Interval': 123,
'Retries': 123,
'StartPeriod': 123,
'Timeout': 123
},
'Hostname': 'string',
'Image': 'string',
'Interactive': True|False,
'Links': [
'string',
],
'LinuxParameters': {
'Capabilities': {
'Add': [
'string',
],
'Drop': [
'string',
]
},
'Devices': [
{
'ContainerPath': 'string',
'HostPath': 'string',
'Permissions': [
'string',
]
},
],
'InitProcessEnabled': True|False,
'MaxSwap': 123,
'SharedMemorySize': 123,
'Swappiness': 123,
'Tmpfs': [
{
'ContainerPath': 'string',
'MountOptions': [
'string',
],
'Size': 123
},
]
},
'LogConfiguration': {
'LogDriver': 'string',
'Options': {
'string': 'string'
},
'SecretOptions': [
{
'Name': 'string',
'ValueFrom': 'string'
},
]
},
'Memory': 123,
'MemoryReservation': 123,
'MountPoints': [
{
'ContainerPath': 'string',
'ReadOnly': True|False,
'SourceVolume': 'string'
},
],
'Name': 'string',
'PortMappings': [
{
'ContainerPort': 123,
'HostPort': 123,
'Protocol': 'string'
},
],
'Privileged': True|False,
'PseudoTerminal': True|False,
'ReadonlyRootFilesystem': True|False,
'RepositoryCredentials': {
'CredentialsParameter': 'string'
},
'ResourceRequirements': [
{
'Type': 'string',
'Value': 'string'
},
],
'Secrets': [
{
'Name': 'string',
'ValueFrom': 'string'
},
],
'StartTimeout': 123,
'StopTimeout': 123,
'SystemControls': [
{
'Namespace': 'string',
'Value': 'string'
},
],
'Ulimits': [
{
'HardLimit': 123,
'Name': 'string',
'SoftLimit': 123
},
],
'User': 'string',
'VolumesFrom': [
{
'ReadOnly': True|False,
'SourceContainer': 'string'
},
],
'WorkingDirectory': 'string'
},
],
'Cpu': 'string',
'ExecutionRoleArn': 'string',
'Family': 'string',
'InferenceAccelerators': [
{
'DeviceName': 'string',
'DeviceType': 'string'
},
],
'IpcMode': 'string',
'Memory': 'string',
'NetworkMode': 'string',
'PidMode': 'string',
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'ProxyConfiguration': {
'ContainerName': 'string',
'ProxyConfigurationProperties': [
{
'Name': 'string',
'Value': 'string'
},
],
'Type': 'string'
},
'RequiresCompatibilities': [
'string',
],
'TaskRoleArn': 'string',
'Volumes': [
{
'DockerVolumeConfiguration': {
'Autoprovision': True|False,
'Driver': 'string',
'DriverOpts': {
'string': 'string'
},
'Labels': {
'string': 'string'
},
'Scope': 'string'
},
'EfsVolumeConfiguration': {
'AuthorizationConfig': {
'AccessPointId': 'string',
'Iam': 'string'
},
'FilesystemId': 'string',
'RootDirectory': 'string',
'TransitEncryption': 'string',
'TransitEncryptionPort': 123
},
'Host': {
'SourcePath': 'string'
},
'Name': 'string'
},
]
},
'Container': {
'ContainerRuntime': 'string',
'Name': 'string',
'ImageId': 'string',
'ImageName': 'string',
'LaunchedAt': 'string',
'VolumeMounts': [
{
'Name': 'string',
'MountPath': 'string'
},
],
'Privileged': True|False
},
'Other': {
'string': 'string'
},
'AwsRdsEventSubscription': {
'CustSubscriptionId': 'string',
'CustomerAwsId': 'string',
'Enabled': True|False,
'EventCategoriesList': [
'string',
],
'EventSubscriptionArn': 'string',
'SnsTopicArn': 'string',
'SourceIdsList': [
'string',
],
'SourceType': 'string',
'Status': 'string',
'SubscriptionCreationTime': 'string'
},
'AwsEcsService': {
'CapacityProviderStrategy': [
{
'Base': 123,
'CapacityProvider': 'string',
'Weight': 123
},
],
'Cluster': 'string',
'DeploymentConfiguration': {
'DeploymentCircuitBreaker': {
'Enable': True|False,
'Rollback': True|False
},
'MaximumPercent': 123,
'MinimumHealthyPercent': 123
},
'DeploymentController': {
'Type': 'string'
},
'DesiredCount': 123,
'EnableEcsManagedTags': True|False,
'EnableExecuteCommand': True|False,
'HealthCheckGracePeriodSeconds': 123,
'LaunchType': 'string',
'LoadBalancers': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'LoadBalancerName': 'string',
'TargetGroupArn': 'string'
},
],
'Name': 'string',
'NetworkConfiguration': {
'AwsVpcConfiguration': {
'AssignPublicIp': 'string',
'SecurityGroups': [
'string',
],
'Subnets': [
'string',
]
}
},
'PlacementConstraints': [
{
'Expression': 'string',
'Type': 'string'
},
],
'PlacementStrategies': [
{
'Field': 'string',
'Type': 'string'
},
],
'PlatformVersion': 'string',
'PropagateTags': 'string',
'Role': 'string',
'SchedulingStrategy': 'string',
'ServiceArn': 'string',
'ServiceName': 'string',
'ServiceRegistries': [
{
'ContainerName': 'string',
'ContainerPort': 123,
'Port': 123,
'RegistryArn': 'string'
},
],
'TaskDefinition': 'string'
},
'AwsAutoScalingLaunchConfiguration': {
'AssociatePublicIpAddress': True|False,
'BlockDeviceMappings': [
{
'DeviceName': 'string',
'Ebs': {
'DeleteOnTermination': True|False,
'Encrypted': True|False,
'Iops': 123,
'SnapshotId': 'string',
'VolumeSize': 123,
'VolumeType': 'string'
},
'NoDevice': True|False,
'VirtualName': 'string'
},
],
'ClassicLinkVpcId': 'string',
'ClassicLinkVpcSecurityGroups': [
'string',
],
'CreatedTime': 'string',
'EbsOptimized': True|False,
'IamInstanceProfile': 'string',
'ImageId': 'string',
'InstanceMonitoring': {
'Enabled': True|False
},
'InstanceType': 'string',
'KernelId': 'string',
'KeyName': 'string',
'LaunchConfigurationName': 'string',
'PlacementTenancy': 'string',
'RamdiskId': 'string',
'SecurityGroups': [
'string',
],
'SpotPrice': 'string',
'UserData': 'string',
'MetadataOptions': {
'HttpEndpoint': 'string',
'HttpPutResponseHopLimit': 123,
'HttpTokens': 'string'
}
},
'AwsEc2VpnConnection': {
'VpnConnectionId': 'string',
'State': 'string',
'CustomerGatewayId': 'string',
'CustomerGatewayConfiguration': 'string',
'Type': 'string',
'VpnGatewayId': 'string',
'Category': 'string',
'VgwTelemetry': [
{
'AcceptedRouteCount': 123,
'CertificateArn': 'string',
'LastStatusChange': 'string',
'OutsideIpAddress': 'string',
'Status': 'string',
'StatusMessage': 'string'
},
],
'Options': {
'StaticRoutesOnly': True|False,
'TunnelOptions': [
{
'DpdTimeoutSeconds': 123,
'IkeVersions': [
'string',
],
'OutsideIpAddress': 'string',
'Phase1DhGroupNumbers': [
123,
],
'Phase1EncryptionAlgorithms': [
'string',
],
'Phase1IntegrityAlgorithms': [
'string',
],
'Phase1LifetimeSeconds': 123,
'Phase2DhGroupNumbers': [
123,
],
'Phase2EncryptionAlgorithms': [
'string',
],
'Phase2IntegrityAlgorithms': [
'string',
],
'Phase2LifetimeSeconds': 123,
'PreSharedKey': 'string',
'RekeyFuzzPercentage': 123,
'RekeyMarginTimeSeconds': 123,
'ReplayWindowSize': 123,
'TunnelInsideCidr': 'string'
},
]
},
'Routes': [
{
'DestinationCidrBlock': 'string',
'State': 'string'
},
],
'TransitGatewayId': 'string'
},
'AwsEcrContainerImage': {
'RegistryId': 'string',
'RepositoryName': 'string',
'Architecture': 'string',
'ImageDigest': 'string',
'ImageTags': [
'string',
],
'ImagePublishedAt': 'string'
},
'AwsOpenSearchServiceDomain': {
'Arn': 'string',
'AccessPolicies': 'string',
'DomainName': 'string',
'Id': 'string',
'DomainEndpoint': 'string',
'EngineVersion': 'string',
'EncryptionAtRestOptions': {
'Enabled': True|False,
'KmsKeyId': 'string'
},
'NodeToNodeEncryptionOptions': {
'Enabled': True|False
},
'ServiceSoftwareOptions': {
'AutomatedUpdateDate': 'string',
'Cancellable': True|False,
'CurrentVersion': 'string',
'Description': 'string',
'NewVersion': 'string',
'UpdateAvailable': True|False,
'UpdateStatus': 'string',
'OptionalDeployment': True|False
},
'ClusterConfig': {
'InstanceCount': 123,
'WarmEnabled': True|False,
'WarmCount': 123,
'DedicatedMasterEnabled': True|False,
'ZoneAwarenessConfig': {
'AvailabilityZoneCount': 123
},
'DedicatedMasterCount': 123,
'InstanceType': 'string',
'WarmType': 'string',
'ZoneAwarenessEnabled': True|False,
'DedicatedMasterType': 'string'
},
'DomainEndpointOptions': {
'CustomEndpointCertificateArn': 'string',
'CustomEndpointEnabled': True|False,
'EnforceHTTPS': True|False,
'CustomEndpoint': 'string',
'TLSSecurityPolicy': 'string'
},
'VpcOptions': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'LogPublishingOptions': {
'IndexSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'SearchSlowLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
},
'AuditLogs': {
'CloudWatchLogsLogGroupArn': 'string',
'Enabled': True|False
}
},
'DomainEndpoints': {
'string': 'string'
},
'AdvancedSecurityOptions': {
'Enabled': True|False,
'InternalUserDatabaseEnabled': True|False,
'MasterUserOptions': {
'MasterUserArn': 'string',
'MasterUserName': 'string',
'MasterUserPassword': 'string'
}
}
},
'AwsEc2VpcEndpointService': {
'AcceptanceRequired': True|False,
'AvailabilityZones': [
'string',
],
'BaseEndpointDnsNames': [
'string',
],
'ManagesVpcEndpoints': True|False,
'GatewayLoadBalancerArns': [
'string',
],
'NetworkLoadBalancerArns': [
'string',
],
'PrivateDnsName': 'string',
'ServiceId': 'string',
'ServiceName': 'string',
'ServiceState': 'string',
'ServiceType': [
{
'ServiceType': 'string'
},
]
},
'AwsXrayEncryptionConfig': {
'KeyId': 'string',
'Status': 'string',
'Type': 'string'
},
'AwsWafRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsWafRegionalRateBasedRule': {
'MetricName': 'string',
'Name': 'string',
'RateKey': 'string',
'RateLimit': 123,
'RuleId': 'string',
'MatchPredicates': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
]
},
'AwsEcrRepository': {
'Arn': 'string',
'ImageScanningConfiguration': {
'ScanOnPush': True|False
},
'ImageTagMutability': 'string',
'LifecyclePolicy': {
'LifecyclePolicyText': 'string',
'RegistryId': 'string'
},
'RepositoryName': 'string',
'RepositoryPolicyText': 'string'
},
'AwsEksCluster': {
'Arn': 'string',
'CertificateAuthorityData': 'string',
'ClusterStatus': 'string',
'Endpoint': 'string',
'Name': 'string',
'ResourcesVpcConfig': {
'SecurityGroupIds': [
'string',
],
'SubnetIds': [
'string',
]
},
'RoleArn': 'string',
'Version': 'string',
'Logging': {
'ClusterLogging': [
{
'Enabled': True|False,
'Types': [
'string',
]
},
]
}
},
'AwsNetworkFirewallFirewallPolicy': {
'FirewallPolicy': {
'StatefulRuleGroupReferences': [
{
'ResourceArn': 'string'
},
],
'StatelessCustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessDefaultActions': [
'string',
],
'StatelessFragmentDefaultActions': [
'string',
],
'StatelessRuleGroupReferences': [
{
'Priority': 123,
'ResourceArn': 'string'
},
]
},
'FirewallPolicyArn': 'string',
'FirewallPolicyId': 'string',
'FirewallPolicyName': 'string',
'Description': 'string'
},
'AwsNetworkFirewallFirewall': {
'DeleteProtection': True|False,
'Description': 'string',
'FirewallArn': 'string',
'FirewallId': 'string',
'FirewallName': 'string',
'FirewallPolicyArn': 'string',
'FirewallPolicyChangeProtection': True|False,
'SubnetChangeProtection': True|False,
'SubnetMappings': [
{
'SubnetId': 'string'
},
],
'VpcId': 'string'
},
'AwsNetworkFirewallRuleGroup': {
'Capacity': 123,
'Description': 'string',
'RuleGroup': {
'RuleVariables': {
'IpSets': {
'Definition': [
'string',
]
},
'PortSets': {
'Definition': [
'string',
]
}
},
'RulesSource': {
'RulesSourceList': {
'GeneratedRulesType': 'string',
'TargetTypes': [
'string',
],
'Targets': [
'string',
]
},
'RulesString': 'string',
'StatefulRules': [
{
'Action': 'string',
'Header': {
'Destination': 'string',
'DestinationPort': 'string',
'Direction': 'string',
'Protocol': 'string',
'Source': 'string',
'SourcePort': 'string'
},
'RuleOptions': [
{
'Keyword': 'string',
'Settings': [
'string',
]
},
]
},
],
'StatelessRulesAndCustomActions': {
'CustomActions': [
{
'ActionDefinition': {
'PublishMetricAction': {
'Dimensions': [
{
'Value': 'string'
},
]
}
},
'ActionName': 'string'
},
],
'StatelessRules': [
{
'Priority': 123,
'RuleDefinition': {
'Actions': [
'string',
],
'MatchAttributes': {
'DestinationPorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Destinations': [
{
'AddressDefinition': 'string'
},
],
'Protocols': [
123,
],
'SourcePorts': [
{
'FromPort': 123,
'ToPort': 123
},
],
'Sources': [
{
'AddressDefinition': 'string'
},
],
'TcpFlags': [
{
'Flags': [
'string',
],
'Masks': [
'string',
]
},
]
}
}
},
]
}
}
},
'RuleGroupArn': 'string',
'RuleGroupId': 'string',
'RuleGroupName': 'string',
'Type': 'string'
},
'AwsRdsDbSecurityGroup': {
'DbSecurityGroupArn': 'string',
'DbSecurityGroupDescription': 'string',
'DbSecurityGroupName': 'string',
'Ec2SecurityGroups': [
{
'Ec2SecurityGroupId': 'string',
'Ec2SecurityGroupName': 'string',
'Ec2SecurityGroupOwnerId': 'string',
'Status': 'string'
},
],
'IpRanges': [
{
'CidrIp': 'string',
'Status': 'string'
},
],
'OwnerId': 'string',
'VpcId': 'string'
},
'AwsKinesisStream': {
'Name': 'string',
'Arn': 'string',
'StreamEncryption': {
'EncryptionType': 'string',
'KeyId': 'string'
},
'ShardCount': 123,
'RetentionPeriodHours': 123
},
'AwsEc2TransitGateway': {
'Id': 'string',
'Description': 'string',
'DefaultRouteTablePropagation': 'string',
'AutoAcceptSharedAttachments': 'string',
'DefaultRouteTableAssociation': 'string',
'TransitGatewayCidrBlocks': [
'string',
],
'AssociationDefaultRouteTableId': 'string',
'PropagationDefaultRouteTableId': 'string',
'VpnEcmpSupport': 'string',
'DnsSupport': 'string',
'MulticastSupport': 'string',
'AmazonSideAsn': 123
},
'AwsEfsAccessPoint': {
'AccessPointId': 'string',
'Arn': 'string',
'ClientToken': 'string',
'FileSystemId': 'string',
'PosixUser': {
'Gid': 'string',
'SecondaryGids': [
'string',
],
'Uid': 'string'
},
'RootDirectory': {
'CreationInfo': {
'OwnerGid': 'string',
'OwnerUid': 'string',
'Permissions': 'string'
},
'Path': 'string'
}
},
'AwsCloudFormationStack': {
'Capabilities': [
'string',
],
'CreationTime': 'string',
'Description': 'string',
'DisableRollback': True|False,
'DriftInformation': {
'StackDriftStatus': 'string'
},
'EnableTerminationProtection': True|False,
'LastUpdatedTime': 'string',
'NotificationArns': [
'string',
],
'Outputs': [
{
'Description': 'string',
'OutputKey': 'string',
'OutputValue': 'string'
},
],
'RoleArn': 'string',
'StackId': 'string',
'StackName': 'string',
'StackStatus': 'string',
'StackStatusReason': 'string',
'TimeoutInMinutes': 123
},
'AwsCloudWatchAlarm': {
'ActionsEnabled': True|False,
'AlarmActions': [
'string',
],
'AlarmArn': 'string',
'AlarmConfigurationUpdatedTimestamp': 'string',
'AlarmDescription': 'string',
'AlarmName': 'string',
'ComparisonOperator': 'string',
'DatapointsToAlarm': 123,
'Dimensions': [
{
'Name': 'string',
'Value': 'string'
},
],
'EvaluateLowSampleCountPercentile': 'string',
'EvaluationPeriods': 123,
'ExtendedStatistic': 'string',
'InsufficientDataActions': [
'string',
],
'MetricName': 'string',
'Namespace': 'string',
'OkActions': [
'string',
],
'Period': 123,
'Statistic': 'string',
'Threshold': 123.0,
'ThresholdMetricId': 'string',
'TreatMissingData': 'string',
'Unit': 'string'
},
'AwsEc2VpcPeeringConnection': {
'AccepterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'ExpirationTime': 'string',
'RequesterVpcInfo': {
'CidrBlock': 'string',
'CidrBlockSet': [
{
'CidrBlock': 'string'
},
],
'Ipv6CidrBlockSet': [
{
'Ipv6CidrBlock': 'string'
},
],
'OwnerId': 'string',
'PeeringOptions': {
'AllowDnsResolutionFromRemoteVpc': True|False,
'AllowEgressFromLocalClassicLinkToRemoteVpc': True|False,
'AllowEgressFromLocalVpcToRemoteClassicLink': True|False
},
'Region': 'string',
'VpcId': 'string'
},
'Status': {
'Code': 'string',
'Message': 'string'
},
'VpcPeeringConnectionId': 'string'
},
'AwsWafRegionalRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsWafRegionalRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRegionalWebAcl': {
'DefaultAction': 'string',
'MetricName': 'string',
'Name': 'string',
'RulesList': [
{
'Action': {
'Type': 'string'
},
'OverrideAction': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
],
'WebAclId': 'string'
},
'AwsWafRule': {
'MetricName': 'string',
'Name': 'string',
'PredicateList': [
{
'DataId': 'string',
'Negated': True|False,
'Type': 'string'
},
],
'RuleId': 'string'
},
'AwsWafRuleGroup': {
'MetricName': 'string',
'Name': 'string',
'RuleGroupId': 'string',
'Rules': [
{
'Action': {
'Type': 'string'
},
'Priority': 123,
'RuleId': 'string',
'Type': 'string'
},
]
},
'AwsEcsTask': {
'ClusterArn': 'string',
'TaskDefinitionArn': 'string',
'Version': 'string',
'CreatedAt': 'string',
'StartedAt': 'string',
'StartedBy': 'string',
'Group': 'string',
'Volumes': [
{
'Name': 'string',
'Host': {
'SourcePath': 'string'
}
},
],
'Containers': [
{
'Name': 'string',
'Image': 'string',
'MountPoints': [
{
'SourceVolume': 'string',
'ContainerPath': 'string'
},
],
'Privileged': True|False
},
]
}
}
},
],
'Compliance': {
'Status': 'PASSED'|'WARNING'|'FAILED'|'NOT_AVAILABLE',
'RelatedRequirements': [
'string',
],
'StatusReasons': [
{
'ReasonCode': 'string',
'Description': 'string'
},
]
},
'VerificationState': 'UNKNOWN'|'TRUE_POSITIVE'|'FALSE_POSITIVE'|'BENIGN_POSITIVE',
'WorkflowState': 'NEW'|'ASSIGNED'|'IN_PROGRESS'|'DEFERRED'|'RESOLVED',
'Workflow': {
'Status': 'NEW'|'NOTIFIED'|'RESOLVED'|'SUPPRESSED'
},
'RecordState': 'ACTIVE'|'ARCHIVED',
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Note': {
'Text': 'string',
'UpdatedBy': 'string',
'UpdatedAt': 'string'
},
'Vulnerabilities': [
{
'Id': 'string',
'VulnerablePackages': [
{
'Name': 'string',
'Version': 'string',
'Epoch': 'string',
'Release': 'string',
'Architecture': 'string',
'PackageManager': 'string',
'FilePath': 'string'
},
],
'Cvss': [
{
'Version': 'string',
'BaseScore': 123.0,
'BaseVector': 'string',
'Source': 'string',
'Adjustments': [
{
'Metric': 'string',
'Reason': 'string'
},
]
},
],
'RelatedVulnerabilities': [
'string',
],
'Vendor': {
'Name': 'string',
'Url': 'string',
'VendorSeverity': 'string',
'VendorCreatedAt': 'string',
'VendorUpdatedAt': 'string'
},
'ReferenceUrls': [
'string',
]
},
],
'PatchSummary': {
'Id': 'string',
'InstalledCount': 123,
'MissingCount': 123,
'FailedCount': 123,
'InstalledOtherCount': 123,
'InstalledRejectedCount': 123,
'InstalledPendingReboot': 123,
'OperationStartTime': 'string',
'OperationEndTime': 'string',
'RebootOption': 'string',
'Operation': 'string'
},
'Action': {
'ActionType': 'string',
'NetworkConnectionAction': {
'ConnectionDirection': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'RemotePortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'Protocol': 'string',
'Blocked': True|False
},
'AwsApiCallAction': {
'Api': 'string',
'ServiceName': 'string',
'CallerType': 'string',
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
},
'DomainDetails': {
'Domain': 'string'
},
'AffectedResources': {
'string': 'string'
},
'FirstSeen': 'string',
'LastSeen': 'string'
},
'DnsRequestAction': {
'Domain': 'string',
'Protocol': 'string',
'Blocked': True|False
},
'PortProbeAction': {
'PortProbeDetails': [
{
'LocalPortDetails': {
'Port': 123,
'PortName': 'string'
},
'LocalIpDetails': {
'IpAddressV4': 'string'
},
'RemoteIpDetails': {
'IpAddressV4': 'string',
'Organization': {
'Asn': 123,
'AsnOrg': 'string',
'Isp': 'string',
'Org': 'string'
},
'Country': {
'CountryCode': 'string',
'CountryName': 'string'
},
'City': {
'CityName': 'string'
},
'GeoLocation': {
'Lon': 123.0,
'Lat': 123.0
}
}
},
],
'Blocked': True|False
}
},
'FindingProviderFields': {
'Confidence': 123,
'Criticality': 123,
'RelatedFindings': [
{
'ProductArn': 'string',
'Id': 'string'
},
],
'Severity': {
'Label': 'INFORMATIONAL'|'LOW'|'MEDIUM'|'HIGH'|'CRITICAL',
'Original': 'string'
},
'Types': [
'string',
]
},
'Sample': True|False
},
],
}
Response Structure
(dict) --
Findings (list) --
The findings that matched the filters specified in the request.
(dict) --
Provides consistent format for the contents of the Security Hub-aggregated findings. AwsSecurityFinding format enables you to share findings between Amazon Web Services security services and third-party solutions, and security standards checks.
Note
A finding is a potential security issue generated either by Amazon Web Services services or by the integrated third-party solutions and standards checks.
SchemaVersion (string) --
The schema version that a finding is formatted for.
Id (string) --
The security findings provider-specific identifier for a finding.
ProductArn (string) --
The ARN generated by Security Hub that uniquely identifies a product that generates findings. This can be the ARN for a third-party product that is integrated with Security Hub, or the ARN for a custom integration.
ProductName (string) --
The name of the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by product name, you use this attribute.
CompanyName (string) --
The name of the company for the product that generated the finding.
Security Hub populates this attribute automatically for each finding. You cannot update this attribute with BatchImportFindings or BatchUpdateFindings . The exception to this is a custom integration.
When you use the Security Hub console or API to filter findings by company name, you use this attribute.
Region (string) --
The Region from which the finding was generated.
Security Hub populates this attribute automatically for each finding. You cannot update it using BatchImportFindings or BatchUpdateFindings .
GeneratorId (string) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
AwsAccountId (string) --
The Amazon Web Services account ID that a finding is generated in.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
FirstObservedAt (string) --
Indicates when the security-findings provider first observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastObservedAt (string) --
Indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
CreatedAt (string) --
Indicates when the security-findings provider created the potential security issue that a finding captured.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
UpdatedAt (string) --
Indicates when the security-findings provider last updated the finding record.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Severity (dict) --
A finding's severity.
Product (float) --
Deprecated. This attribute is being deprecated. Instead of providing Product , provide Original .
The native severity as defined by the Amazon Web Services service or integrated partner product that generated the finding.
Label (string) --
The severity value of the finding. The allowed values are the following.
INFORMATIONAL - No issue was found.LOW - The issue does not require action on its own.MEDIUM - The issue must be addressed but not urgently.HIGH - The issue must be addressed as a priority.CRITICAL - The issue must be remediated immediately to avoid it escalating.If you provide Normalized and do not provide Label , then Label is set automatically as follows.
INFORMATIONALLOWMEDIUMHIGHCRITICALNormalized (integer) --
Deprecated. The normalized severity of a finding. This attribute is being deprecated. Instead of providing Normalized , provide Label .
If you provide Label and do not provide Normalized , then Normalized is set automatically as follows.
INFORMATIONAL - 0LOW - 1MEDIUM - 40HIGH - 70CRITICAL - 90Original (string) --
The native severity from the finding product that generated the finding.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
Title (string) --
A finding's title.
Note
In this release, Title is a required property.
Description (string) --
A finding's description.
Note
In this release, Description is a required property.
Remediation (dict) --
A data type that describes the remediation options for a finding.
Recommendation (dict) --
A recommendation on the steps to take to remediate the issue identified by a finding.
Text (string) --
Describes the recommended steps to take to remediate an issue identified in a finding.
Url (string) --
A URL to a page or site that contains information about how to remediate a finding.
SourceUrl (string) --
A URL that links to a page about the current finding in the security-findings provider's solution.
ProductFields (dict) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
Can contain up to 50 key-value pairs. For each key-value pair, the key can contain up to 128 characters, and the value can contain up to 2048 characters.
UserDefinedFields (dict) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
Malware (list) --
A list of malware related to a finding.
(dict) --
A list of malware related to a finding.
Name (string) --
The name of the malware that was observed.
Type (string) --
The type of the malware that was observed.
Path (string) --
The file system path of the malware that was observed.
State (string) --
The state of the malware that was observed.
Network (dict) --
The details of network-related information about a finding.
Direction (string) --
The direction of network traffic associated with a finding.
Protocol (string) --
The protocol of network-related information about a finding.
OpenPortRange (dict) --
The range of open ports that is present on the network.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
SourceIpV4 (string) --
The source IPv4 address of network-related information about a finding.
SourceIpV6 (string) --
The source IPv6 address of network-related information about a finding.
SourcePort (integer) --
The source port of network-related information about a finding.
SourceDomain (string) --
The source domain of network-related information about a finding.
SourceMac (string) --
The source media access control (MAC) address of network-related information about a finding.
DestinationIpV4 (string) --
The destination IPv4 address of network-related information about a finding.
DestinationIpV6 (string) --
The destination IPv6 address of network-related information about a finding.
DestinationPort (integer) --
The destination port of network-related information about a finding.
DestinationDomain (string) --
The destination domain of network-related information about a finding.
NetworkPath (list) --
Provides information about a network path that is relevant to a finding. Each entry under NetworkPath represents a component of that path.
(dict) --
Information about a network path component.
ComponentId (string) --
The identifier of a component in the network path.
ComponentType (string) --
The type of component.
Egress (dict) --
Information about the component that comes after the current component in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Ingress (dict) --
Information about the component that comes before the current node in the network path.
Protocol (string) --
The protocol used for the component.
Destination (dict) --
Information about the destination of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Source (dict) --
Information about the origin of the component.
Address (list) --
The IP addresses of the destination.
PortRanges (list) --
A list of port ranges for the destination.
(dict) --
A range of ports.
Begin (integer) --
The first port in the port range.
End (integer) --
The last port in the port range.
Process (dict) --
The details of process-related information about a finding.
Name (string) --
The name of the process.
Path (string) --
The path to the process executable.
Pid (integer) --
The process ID.
ParentPid (integer) --
The parent process ID.
LaunchedAt (string) --
Indicates when the process was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
TerminatedAt (string) --
Indicates when the process was terminated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Threats (list) --
Details about the threat detected in a security finding and the file paths that were affected by the threat.
(dict) --
Provides information about the threat detected in a security finding and the file paths that were affected by the threat.
Name (string) --
The name of the threat.
Severity (string) --
The severity of the threat.
ItemCount (integer) --
This total number of items in which the threat has been detected.
FilePaths (list) --
Provides information about the file paths that were affected by the threat.
(dict) --
Provides information about the file paths that were affected by the threat.
FilePath (string) --
Path to the infected or suspicious file on the resource it was detected on.
FileName (string) --
The name of the infected or suspicious file corresponding to the hash.
ResourceId (string) --
The Amazon Resource Name (ARN) of the resource on which the threat was detected.
Hash (string) --
The hash value for the infected or suspicious file.
ThreatIntelIndicators (list) --
Threat intelligence details related to a finding.
(dict) --
Details about the threat intelligence related to a finding.
Type (string) --
The type of threat intelligence indicator.
Value (string) --
The value of a threat intelligence indicator.
Category (string) --
The category of a threat intelligence indicator.
LastObservedAt (string) --
Indicates when the most recent instance of a threat intelligence indicator was observed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Source (string) --
The source of the threat intelligence indicator.
SourceUrl (string) --
The URL to the page or site where you can get more information about the threat intelligence indicator.
Resources (list) --
A set of resource data types that describe the resources that the finding refers to.
(dict) --
A resource related to a finding.
Type (string) --
The type of the resource that details are provided for. If possible, set Type to one of the supported resource types. For example, if the resource is an EC2 instance, then set Type to AwsEc2Instance .
If the resource does not match any of the provided types, then set Type to Other .
Id (string) --
The canonical identifier for the given resource type.
Partition (string) --
The canonical Amazon Web Services partition name that the Region is assigned to.
Region (string) --
The canonical Amazon Web Services external Region name where this resource is located.
ResourceRole (string) --
Identifies the role of the resource in the finding. A resource is either the actor or target of the finding activity,
Tags (dict) --
A list of Amazon Web Services tags associated with a resource at the time the finding was processed.
DataClassification (dict) --
Contains information about sensitive data that was detected on the resource.
DetailedResultsLocation (string) --
The path to the folder or file that contains the sensitive data.
Result (dict) --
The details about the sensitive data that was detected on the resource.
MimeType (string) --
The type of content that the finding applies to.
SizeClassified (integer) --
The total size in bytes of the affected data.
AdditionalOccurrences (boolean) --
Indicates whether there are additional occurrences of sensitive data that are not included in the finding. This occurs when the number of occurrences exceeds the maximum that can be included.
Status (dict) --
The current status of the sensitive data detection.
Code (string) --
The code that represents the status of the sensitive data detection.
Reason (string) --
A longer description of the current status of the sensitive data detection.
SensitiveData (list) --
Provides details about sensitive data that was identified based on built-in configuration.
(dict) --
Contains a detected instance of sensitive data that are based on built-in identifiers.
Category (string) --
The category of sensitive data that was detected. For example, the category can indicate that the sensitive data involved credentials, financial information, or personal information.
Detections (list) --
The list of detected instances of sensitive data.
(dict) --
The list of detected instances of sensitive data.
Count (integer) --
The total number of occurrences of sensitive data that were detected.
Type (string) --
The type of sensitive data that was detected. For example, the type might indicate that the data is an email address.
Occurrences (dict) --
Details about the sensitive data that was detected.
LineRanges (list) --
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRanges (list) --
Occurrences of sensitive data detected in a binary text file.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Pages (list) --
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
(dict) --
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
PageNumber (integer) --
The page number of the page that contains the sensitive data.
LineRange (dict) --
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRange (dict) --
An occurrence of sensitive data detected in a binary text file.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Records (list) --
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
(dict) --
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
JsonPath (string) --
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
RecordIndex (integer) --
The record index, starting from 0, for the record that contains the data.
Cells (list) --
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
(dict) --
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
Column (integer) --
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
Row (integer) --
The row number of the row that contains the data.
ColumnName (string) --
The name of the column that contains the data.
CellReference (string) --
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
TotalCount (integer) --
The total number of occurrences of sensitive data.
CustomDataIdentifiers (dict) --
Provides details about sensitive data that was identified based on customer-defined configuration.
Detections (list) --
The list of detected instances of sensitive data.
(dict) --
The list of detected instances of sensitive data.
Count (integer) --
The total number of occurrences of sensitive data that were detected.
Arn (string) --
The ARN of the custom identifier that was used to detect the sensitive data.
Name (string) --
he name of the custom identifier that detected the sensitive data.
Occurrences (dict) --
Details about the sensitive data that was detected.
LineRanges (list) --
Occurrences of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRanges (list) --
Occurrences of sensitive data detected in a binary text file.
(dict) --
Identifies where the sensitive data begins and ends.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Pages (list) --
Occurrences of sensitive data in an Adobe Portable Document Format (PDF) file.
(dict) --
An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.
PageNumber (integer) --
The page number of the page that contains the sensitive data.
LineRange (dict) --
An occurrence of sensitive data detected in a non-binary text file or a Microsoft Word file. Non-binary text files include files such as HTML, XML, JSON, and TXT files.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
OffsetRange (dict) --
An occurrence of sensitive data detected in a binary text file.
Start (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
End (integer) --
The number of lines (for a line range) or characters (for an offset range) from the beginning of the file to the end of the sensitive data.
StartColumn (integer) --
In the line where the sensitive data starts, the column within the line where the sensitive data starts.
Records (list) --
Occurrences of sensitive data in an Apache Avro object container or an Apache Parquet file.
(dict) --
An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.
JsonPath (string) --
The path, as a JSONPath expression, to the field in the record that contains the data. If the field name is longer than 20 characters, it is truncated. If the path is longer than 250 characters, it is truncated.
RecordIndex (integer) --
The record index, starting from 0, for the record that contains the data.
Cells (list) --
Occurrences of sensitive data detected in Microsoft Excel workbooks, comma-separated value (CSV) files, or tab-separated value (TSV) files.
(dict) --
An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.
Column (integer) --
The column number of the column that contains the data. For a Microsoft Excel workbook, the column number corresponds to the alphabetical column identifiers. For example, a value of 1 for Column corresponds to the A column in the workbook.
Row (integer) --
The row number of the row that contains the data.
ColumnName (string) --
The name of the column that contains the data.
CellReference (string) --
For a Microsoft Excel workbook, provides the location of the cell, as an absolute cell reference, that contains the data. For example, Sheet2!C5 for cell C5 on Sheet2.
TotalCount (integer) --
The total number of occurrences of sensitive data.
Details (dict) --
Additional details about the resource related to a finding.
AwsAutoScalingAutoScalingGroup (dict) --
Details for an autoscaling group.
LaunchConfigurationName (string) --
The name of the launch configuration.
LoadBalancerNames (list) --
The list of load balancers associated with the group.
HealthCheckType (string) --
The service to use for the health checks.
HealthCheckGracePeriod (integer) --
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before it checks the health status of an EC2 instance that has come into service.
CreatedTime (string) --
Indicates when the auto scaling group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
MixedInstancesPolicy (dict) --
The mixed instances policy for the automatic scaling group.
InstancesDistribution (dict) --
The instances distribution. The instances distribution specifies the distribution of On-Demand Instances and Spot Instances, the maximum price to pay for Spot Instances, and how the Auto Scaling group allocates instance types to fulfill On-Demand and Spot capacity.
OnDemandAllocationStrategy (string) --
How to allocate instance types to fulfill On-Demand capacity.
OnDemandBaseCapacity (integer) --
The minimum amount of the Auto Scaling group's capacity that must be fulfilled by On-Demand Instances.
OnDemandPercentageAboveBaseCapacity (integer) --
The percentage of On-Demand Instances and Spot Instances for additional capacity beyond OnDemandBaseCapacity .
SpotAllocationStrategy (string) --
How to allocate instances across Spot Instance pools.
SpotInstancePools (integer) --
The number of Spot Instance pools across which to allocate your Spot Instances.
SpotMaxPrice (string) --
The maximum price per unit hour that you are willing to pay for a Spot Instance.
LaunchTemplate (dict) --
The launch template to use and the instance types (overrides) to use to provision EC2 instances to fulfill On-Demand and Spot capacities.
LaunchTemplateSpecification (dict) --
The launch template to use for a mixed instances policy.
LaunchTemplateId (string) --
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
LaunchTemplateName (string) --
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Version (string) --
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
Overrides (list) --
Property values to use to override the values in the launch template.
(dict) --
Property values to use to override the values in the launch template.
InstanceType (string) --
The instance type. For example, m3.xlarge .
WeightedCapacity (string) --
The number of capacity units provided by the specified instance type in terms of virtual CPUs, memory, storage, throughput, or other relative performance characteristic.
AvailabilityZones (list) --
The list of Availability Zones for the automatic scaling group.
(dict) --
An Availability Zone for the automatic scaling group.
Value (string) --
The name of the Availability Zone.
LaunchTemplate (dict) --
The launch template to use.
LaunchTemplateId (string) --
The identifier of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
LaunchTemplateName (string) --
The name of the launch template. You must specify either LaunchTemplateId or LaunchTemplateName .
Version (string) --
Identifies the version of the launch template. You can specify a version identifier, or use the values $Latest or $Default .
CapacityRebalance (boolean) --
Indicates whether capacity rebalancing is enabled.
AwsCodeBuildProject (dict) --
Details for an CodeBuild project.
EncryptionKey (string) --
The KMS key used to encrypt the build output artifacts.
You can specify either the ARN of the KMS key or, if available, the KMS key alias (using the format alias/alias-name).
Artifacts (list) --
Information about the build artifacts for the CodeBuild project.
(dict) --
Information about the build artifacts for the CodeBuild project.
ArtifactIdentifier (string) --
An identifier for the artifact definition.
EncryptionDisabled (boolean) --
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Location (string) --
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Name (string) --
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
NamespaceType (string) --
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
OverrideArtifactName (boolean) --
Whether the name specified in the buildspec file overrides the artifact name.
Packaging (string) --
Only used when Type is S3 . The type of output artifact to create.
Path (string) --
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
Type (string) --
The type of build artifact.
Environment (dict) --
Information about the build environment for this build project.
Certificate (string) --
The certificate to use with this build project.
EnvironmentVariables (list) --
A set of environment variables to make available to builds for the build project.
(dict) --
Information about an environment variable that is available to builds for the build project.
Name (string) --
The name of the environment variable.
Type (string) --
The type of environment variable.
Value (string) --
The value of the environment variable.
PrivilegedMode (boolean) --
Whether to allow the Docker daemon to run inside a Docker container. Set to true if the build project is used to build Docker images.
ImagePullCredentialsType (string) --
The type of credentials CodeBuild uses to pull images in your build.
Valid values:
CODEBUILD specifies that CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust the CodeBuild service principal.SERVICE_ROLE specifies that CodeBuild uses your build project's service role.When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an CodeBuild curated image, you must use CODEBUILD credentials.
RegistryCredential (dict) --
The credentials for access to a private registry.
Credential (string) --
The ARN or name of credentials created using Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current Amazon Web Services Region.
CredentialProvider (string) --
The service that created the credentials to access a private Docker registry.
The valid value,``SECRETS_MANAGER`` , is for Secrets Manager.
Type (string) --
The type of build environment to use for related builds.
The environment type ARM_CONTAINER is available only in Regions US East (N. Virginia), US East (Ohio), US West (Oregon), Europe (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and Europe (Frankfurt).
The environment type LINUX_CONTAINER with compute type build.general1.2xlarge is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
The environment type LINUX_GPU_CONTAINER is available only in Regions US East (N. Virginia), US East (N. Virginia), US West (Oregon), Canada (Central), Europe (Ireland), Europe (London), Europe (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).
Valid values: WINDOWS_CONTAINER | LINUX_CONTAINER | LINUX_GPU_CONTAINER | ARM_CONTAINER
Name (string) --
The name of the build project.
Source (dict) --
Information about the build input source code for this build project.
Type (string) --
The type of repository that contains the source code to be built. Valid values are:
BITBUCKET - The source code is in a Bitbucket repository.CODECOMMIT - The source code is in an CodeCommit repository.CODEPIPELINE - The source code settings are specified in the source action of a pipeline in CodePipeline.GITHUB - The source code is in a GitHub repository.GITHUB_ENTERPRISE - The source code is in a GitHub Enterprise repository.NO_SOURCE - The project does not have input source code.S3 - The source code is in an S3 input bucket.Location (string) --
Information about the location of the source code to be built.
Valid values include:
https://git-codecommit.region-ID.amazonaws.com/v1/repos/repo-name ).bucket-name/path/to/object-name.zip ).bucket-name/path/to/source-code/folder/ ).GitCloneDepth (integer) --
Information about the Git clone depth for the build project.
InsecureSsl (boolean) --
Whether to ignore SSL warnings while connecting to the project source code.
ServiceRole (string) --
The ARN of the IAM role that enables CodeBuild to interact with dependent Amazon Web Services services on behalf of the Amazon Web Services account.
LogsConfig (dict) --
Information about logs for the build project.
CloudWatchLogs (dict) --
Information about CloudWatch Logs for the build project.
GroupName (string) --
The group name of the logs in CloudWatch Logs.
Status (string) --
The current status of the logs in CloudWatch Logs for a build project.
StreamName (string) --
The prefix of the stream name of the CloudWatch Logs.
S3Logs (dict) --
Information about logs built to an S3 bucket for a build project.
EncryptionDisabled (boolean) --
Whether to disable encryption of the S3 build log output.
Location (string) --
The ARN of the S3 bucket and the path prefix for S3 logs.
Status (string) --
The current status of the S3 build logs.
VpcConfig (dict) --
Information about the VPC configuration that CodeBuild accesses.
VpcId (string) --
The ID of the VPC.
Subnets (list) --
A list of one or more subnet IDs in your VPC.
SecurityGroupIds (list) --
A list of one or more security group IDs in your VPC.
SecondaryArtifacts (list) --
Information about the secondary artifacts for the CodeBuild project.
(dict) --
Information about the build artifacts for the CodeBuild project.
ArtifactIdentifier (string) --
An identifier for the artifact definition.
EncryptionDisabled (boolean) --
Indicates whether to disable encryption on the artifact. Only valid when Type is S3 .
Location (string) --
Only used when Type is S3 . The name of the S3 bucket where the artifact is located.
Name (string) --
Only used when Type is S3. The name of the artifact. Used with NamepaceType and Path to determine the pattern for storing the artifact.
NamespaceType (string) --
Only used when Type is S3 . The value to use for the namespace. Used with Name and Path to determine the pattern for storing the artifact.
OverrideArtifactName (boolean) --
Whether the name specified in the buildspec file overrides the artifact name.
Packaging (string) --
Only used when Type is S3 . The type of output artifact to create.
Path (string) --
Only used when Type is S3 . The path to the artifact. Used with Name and NamespaceType to determine the pattern for storing the artifact.
Type (string) --
The type of build artifact.
AwsCloudFrontDistribution (dict) --
Details about a CloudFront distribution.
CacheBehaviors (dict) --
Provides information about the cache configuration for the distribution.
Items (list) --
The cache behaviors for the distribution.
(dict) --
Information about a cache behavior for the distribution.
ViewerProtocolPolicy (string) --
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).DefaultCacheBehavior (dict) --
The default cache behavior for the configuration.
ViewerProtocolPolicy (string) --
The protocol that viewers can use to access the files in an origin. You can specify the following options:
allow-all - Viewers can use HTTP or HTTPS.redirect-to-https - CloudFront responds to HTTP requests with an HTTP status code of 301 (Moved Permanently) and the HTTPS URL. The viewer then uses the new URL to resubmit.https-only - CloudFront responds to HTTP request with an HTTP status code of 403 (Forbidden).DefaultRootObject (string) --
The object that CloudFront sends in response to requests from the origin (for example, index.html) when a viewer requests the root URL for the distribution (http://www.example.com) instead of an object in your distribution (http://www.example.com/product-description.html).
DomainName (string) --
The domain name corresponding to the distribution.
ETag (string) --
The entity tag is a hash of the object.
LastModifiedTime (string) --
Indicates when that the distribution was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Logging (dict) --
A complex type that controls whether access logs are written for the distribution.
Bucket (string) --
The S3 bucket to store the access logs in.
Enabled (boolean) --
With this field, you can enable or disable the selected distribution.
IncludeCookies (boolean) --
Specifies whether you want CloudFront to include cookies in access logs.
Prefix (string) --
An optional string that you want CloudFront to use as a prefix to the access log filenames for this distribution.
Origins (dict) --
A complex type that contains information about origins for this distribution.
Items (list) --
A complex type that contains origins or origin groups for this distribution.
(dict) --
A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), AWS Elemental MediaStore, or other server from which CloudFront gets your files.
DomainName (string) --
Amazon S3 origins: The DNS name of the S3 bucket from which you want CloudFront to get objects for this origin.
Id (string) --
A unique identifier for the origin or origin group.
OriginPath (string) --
An optional element that causes CloudFront to request your content from a directory in your Amazon S3 bucket or your custom origin.
S3OriginConfig (dict) --
An origin that is an S3 bucket that is not configured with static website hosting.
OriginAccessIdentity (string) --
The CloudFront origin access identity to associate with the origin.
CustomOriginConfig (dict) --
An origin that is not an Amazon S3 bucket, with one exception. If the Amazon S3 bucket is configured with static website hosting, use this attribute. If the Amazon S3 bucket is not configured with static website hosting, use the S3OriginConfig type instead.
HttpPort (integer) --
The HTTP port that CloudFront uses to connect to the origin.
HttpsPort (integer) --
The HTTPS port that CloudFront uses to connect to the origin.
OriginKeepaliveTimeout (integer) --
Specifies how long, in seconds, CloudFront persists its connection to the origin.
OriginProtocolPolicy (string) --
Specifies the protocol (HTTP or HTTPS) that CloudFront uses to connect to the origin.
OriginReadTimeout (integer) --
Specifies how long, in seconds, CloudFront waits for a response from the origin.
OriginSslProtocols (dict) --
Specifies the minimum SSL/TLS protocol that CloudFront uses when connecting to your origin over HTTPS.
Items (list) --
A list that contains allowed SSL/TLS protocols for this distribution.
Quantity (integer) --
The number of SSL/TLS protocols that you want to allow CloudFront to use when establishing an HTTPS connection with this origin.
OriginGroups (dict) --
Provides information about the origin groups in the distribution.
Items (list) --
The list of origin groups.
(dict) --
Information about an origin group for the CloudFront distribution.
FailoverCriteria (dict) --
Provides the criteria for an origin group to fail over.
StatusCodes (dict) --
Information about the status codes that cause an origin group to fail over.
Items (list) --
The list of status code values that can cause a failover to the next origin.
Quantity (integer) --
The number of status codes that can cause a failover.
ViewerCertificate (dict) --
Provides information about the TLS/SSL configuration that the distribution uses to communicate with viewers.
AcmCertificateArn (string) --
The ARN of the ACM certificate. Used if the certificate is stored in ACM. If you provide an ACM certificate ARN, you must also provide MinimumCertificateVersion and SslSupportMethod .
Certificate (string) --
The identifier of the certificate. Note that in CloudFront, this attribute is deprecated.
CertificateSource (string) --
The source of the certificate identified by Certificate . Note that in CloudFront, this attribute is deprecated.
CloudFrontDefaultCertificate (boolean) --
Whether the distribution uses the CloudFront domain name. If set to false , then you provide either AcmCertificateArn or IamCertificateId .
IamCertificateId (string) --
The identifier of the IAM certificate. Used if the certificate is stored in IAM. If you provide IamCertificateId , then you also must provide MinimumProtocolVersion and SslSupportMethod .
MinimumProtocolVersion (string) --
The security policy that CloudFront uses for HTTPS connections with viewers. If SslSupportMethod is sni-only , then MinimumProtocolVersion must be TLSv1 or higher.
SslSupportMethod (string) --
The viewers that the distribution accepts HTTPS connections from.
Status (string) --
Indicates the current status of the distribution.
WebAclId (string) --
A unique identifier that specifies the WAF web ACL, if any, to associate with this distribution.
AwsEc2Instance (dict) --
Details about an EC2 instance related to a finding.
Type (string) --
The instance type of the instance.
ImageId (string) --
The Amazon Machine Image (AMI) ID of the instance.
IpV4Addresses (list) --
The IPv4 addresses associated with the instance.
IpV6Addresses (list) --
The IPv6 addresses associated with the instance.
KeyName (string) --
The key name associated with the instance.
IamInstanceProfileArn (string) --
The IAM profile ARN of the instance.
VpcId (string) --
The identifier of the VPC that the instance was launched in.
SubnetId (string) --
The identifier of the subnet that the instance was launched in.
LaunchedAt (string) --
Indicates when the instance was launched.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NetworkInterfaces (list) --
The identifiers of the network interfaces for the EC2 instance. The details for each network interface are in a corresponding AwsEc2NetworkInterfacesDetails object.
(dict) --
Identifies a network interface for the Amazon EC2 instance.
NetworkInterfaceId (string) --
The identifier of the network interface. The details are in a corresponding AwsEc2NetworkInterfacesDetails object.
VirtualizationType (string) --
The virtualization type of the Amazon Machine Image (AMI) required to launch the instance.
MetadataOptions (dict) --
Details about the metadata options for the Amazon EC2 instance.
HttpEndpoint (string) --
Enables or disables the HTTP metadata endpoint on the instance.
HttpProtocolIpv6 (string) --
Enables or disables the IPv6 endpoint for the instance metadata service.
HttpPutResponseHopLimit (integer) --
The desired HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
HttpTokens (string) --
The state of token usage for your instance metadata requests.
InstanceMetadataTags (string) --
Specifies whether to allow access to instance tags from the instance metadata.
AwsEc2NetworkInterface (dict) --
Details for an EC2 network interface.
Attachment (dict) --
The network interface attachment.
AttachTime (string) --
Indicates when the attachment initiated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AttachmentId (string) --
The identifier of the network interface attachment
DeleteOnTermination (boolean) --
Indicates whether the network interface is deleted when the instance is terminated.
DeviceIndex (integer) --
The device index of the network interface attachment on the instance.
InstanceId (string) --
The ID of the instance.
InstanceOwnerId (string) --
The Amazon Web Services account ID of the owner of the instance.
Status (string) --
The attachment state.
Valid values: attaching | attached | detaching | detached
NetworkInterfaceId (string) --
The ID of the network interface.
SecurityGroups (list) --
Security groups for the network interface.
(dict) --
A security group associated with the network interface.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
SourceDestCheck (boolean) --
Indicates whether traffic to or from the instance is validated.
IpV6Addresses (list) --
The IPv6 addresses associated with the network interface.
(dict) --
Provides information about an IPV6 address that is associated with the network interface.
IpV6Address (string) --
The IPV6 address.
PrivateIpAddresses (list) --
The private IPv4 addresses associated with the network interface.
(dict) --
Provides information about a private IPv4 address that is with the network interface.
PrivateIpAddress (string) --
The IP address.
PrivateDnsName (string) --
The private DNS name for the IP address.
PublicDnsName (string) --
The public DNS name of the network interface.
PublicIp (string) --
The address of the Elastic IP address bound to the network interface.
AwsEc2SecurityGroup (dict) --
Details for an EC2 security group.
GroupName (string) --
The name of the security group.
GroupId (string) --
The ID of the security group.
OwnerId (string) --
The Amazon Web Services account ID of the owner of the security group.
VpcId (string) --
[VPC only] The ID of the VPC for the security group.
IpPermissions (list) --
The inbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and Amazon Web Services account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
IpPermissionsEgress (list) --
[VPC only] The outbound rules associated with the security group.
(dict) --
An IP permission for an EC2 security group.
IpProtocol (string) --
The IP protocol name (tcp , udp , icmp , icmpv6 ) or number.
[VPC only] Use -1 to specify all protocols.
When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify.
For tcp , udp , and icmp , you must specify a port range.
For icmpv6 , the port range is optional. If you omit the port range, traffic for all types and codes is allowed.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs (list) --
The security group and Amazon Web Services account ID pairs.
(dict) --
A relationship between a security group and a user.
GroupId (string) --
The ID of the security group.
GroupName (string) --
The name of the security group.
PeeringStatus (string) --
The status of a VPC peering connection, if applicable.
UserId (string) --
The ID of an Amazon Web Services account.
For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.
[EC2-Classic] Required when adding or removing rules that reference a security group in another VPC.
VpcId (string) --
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection, if applicable.
IpRanges (list) --
The IPv4 ranges.
(dict) --
A range of IPv4 addresses.
CidrIp (string) --
The IPv4 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv4 address, use the /32 prefix length.
Ipv6Ranges (list) --
The IPv6 ranges.
(dict) --
A range of IPv6 addresses.
CidrIpv6 (string) --
The IPv6 CIDR range. You can specify either a CIDR range or a source security group, but not both. To specify a single IPv6 address, use the /128 prefix length.
PrefixListIds (list) --
[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.
(dict) --
A prefix list ID.
PrefixListId (string) --
The ID of the prefix.
AwsEc2Volume (dict) --
Details for an Amazon EC2 volume.
CreateTime (string) --
Indicates when the volume was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DeviceName (string) --
The device name for the volume that is attached to the instance.
Encrypted (boolean) --
Specifies whether the volume is encrypted.
Size (integer) --
The size of the volume, in GiBs.
SnapshotId (string) --
The snapshot from which the volume was created.
Status (string) --
The volume state.
KmsKeyId (string) --
The ARN of the KMS key that was used to protect the volume encryption key for the volume.
Attachments (list) --
The volume attachments.
(dict) --
An attachment to an Amazon EC2 volume.
AttachTime (string) --
The datetime when the attachment initiated.
DeleteOnTermination (boolean) --
Whether the EBS volume is deleted when the EC2 instance is terminated.
InstanceId (string) --
The identifier of the EC2 instance.
Status (string) --
The attachment state of the volume.
VolumeId (string) --
The ID of the volume.
VolumeType (string) --
The volume type.
VolumeScanStatus (string) --
Indicates whether the volume was scanned or skipped.
AwsEc2Vpc (dict) --
Details for an Amazon EC2 VPC.
CidrBlockAssociationSet (list) --
Information about the IPv4 CIDR blocks associated with the VPC.
(dict) --
An IPv4 CIDR block association.
AssociationId (string) --
The association ID for the IPv4 CIDR block.
CidrBlock (string) --
The IPv4 CIDR block.
CidrBlockState (string) --
Information about the state of the IPv4 CIDR block.
Ipv6CidrBlockAssociationSet (list) --
Information about the IPv6 CIDR blocks associated with the VPC.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
DhcpOptionsId (string) --
The identifier of the set of Dynamic Host Configuration Protocol (DHCP) options that are associated with the VPC. If the default options are associated with the VPC, then this is default.
State (string) --
The current state of the VPC.
AwsEc2Eip (dict) --
Details about an Elastic IP address.
InstanceId (string) --
The identifier of the EC2 instance.
PublicIp (string) --
A public IP address that is associated with the EC2 instance.
AllocationId (string) --
The identifier that Amazon Web Services assigns to represent the allocation of the Elastic IP address for use with Amazon VPC.
AssociationId (string) --
The identifier that represents the association of the Elastic IP address with an EC2 instance.
Domain (string) --
The domain in which to allocate the address.
If the address is for use with EC2 instances in a VPC, then Domain is vpc . Otherwise, Domain is standard .
PublicIpv4Pool (string) --
The identifier of an IP address pool. This parameter allows Amazon EC2 to select an IP address from the address pool.
NetworkBorderGroup (string) --
The name of the location from which the Elastic IP address is advertised.
NetworkInterfaceId (string) --
The identifier of the network interface.
NetworkInterfaceOwnerId (string) --
The Amazon Web Services account ID of the owner of the network interface.
PrivateIpAddress (string) --
The private IP address that is associated with the Elastic IP address.
AwsEc2Subnet (dict) --
Details about a subnet in Amazon EC2.
AssignIpv6AddressOnCreation (boolean) --
Whether to assign an IPV6 address to a network interface that is created in this subnet.
AvailabilityZone (string) --
The Availability Zone for the subnet.
AvailabilityZoneId (string) --
The identifier of the Availability Zone for the subnet.
AvailableIpAddressCount (integer) --
The number of available IPV4 addresses in the subnet. Does not include addresses for stopped instances.
CidrBlock (string) --
The IPV4 CIDR block that is assigned to the subnet.
DefaultForAz (boolean) --
Whether this subnet is the default subnet for the Availability Zone.
MapPublicIpOnLaunch (boolean) --
Whether instances in this subnet receive a public IP address.
OwnerId (string) --
The identifier of the Amazon Web Services account that owns the subnet.
State (string) --
The current state of the subnet.
SubnetArn (string) --
The ARN of the subnet.
SubnetId (string) --
The identifier of the subnet.
VpcId (string) --
The identifier of the VPC that contains the subnet.
Ipv6CidrBlockAssociationSet (list) --
The IPV6 CIDR blocks that are associated with the subnet.
(dict) --
An IPV6 CIDR block association.
AssociationId (string) --
The association ID for the IPv6 CIDR block.
Ipv6CidrBlock (string) --
The IPv6 CIDR block.
CidrBlockState (string) --
Information about the state of the CIDR block.
AwsEc2NetworkAcl (dict) --
Details about an EC2 network access control list (ACL).
IsDefault (boolean) --
Whether this is the default network ACL for the VPC.
NetworkAclId (string) --
The identifier of the network ACL.
OwnerId (string) --
The identifier of the Amazon Web Services account that owns the network ACL.
VpcId (string) --
The identifier of the VPC for the network ACL.
Associations (list) --
Associations between the network ACL and subnets.
(dict) --
An association between the network ACL and a subnet.
NetworkAclAssociationId (string) --
The identifier of the association between the network ACL and the subnet.
NetworkAclId (string) --
The identifier of the network ACL.
SubnetId (string) --
The identifier of the subnet that is associated with the network ACL.
Entries (list) --
The set of rules in the network ACL.
(dict) --
A rule for the network ACL. Each rule allows or denies access based on the IP address, traffic direction, port, and protocol.
CidrBlock (string) --
The IPV4 network range for which to deny or allow access.
Egress (boolean) --
Whether the rule is an egress rule. An egress rule is a rule that applies to traffic that leaves the subnet.
IcmpTypeCode (dict) --
The Internet Control Message Protocol (ICMP) type and code for which to deny or allow access.
Code (integer) --
The ICMP code for which to deny or allow access. To deny or allow all codes, use the value -1 .
Type (integer) --
The ICMP type for which to deny or allow access. To deny or allow all types, use the value -1 .
Ipv6CidrBlock (string) --
The IPV6 network range for which to deny or allow access.
PortRange (dict) --
For TCP or UDP protocols, the range of ports that the rule applies to.
From (integer) --
The first port in the port range.
To (integer) --
The last port in the port range.
Protocol (string) --
The protocol that the rule applies to. To deny or allow access to all protocols, use the value -1 .
RuleAction (string) --
Whether the rule is used to allow access or deny access.
RuleNumber (integer) --
The rule number. The rules are processed in order by their number.
AwsElbv2LoadBalancer (dict) --
Details about a load balancer.
AvailabilityZones (list) --
The Availability Zones for the load balancer.
(dict) --
Information about an Availability Zone.
ZoneName (string) --
The name of the Availability Zone.
SubnetId (string) --
The ID of the subnet. You can specify one subnet per Availability Zone.
CanonicalHostedZoneId (string) --
The ID of the Amazon Route 53 hosted zone associated with the load balancer.
CreatedTime (string) --
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DNSName (string) --
The public DNS name of the load balancer.
IpAddressType (string) --
The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).
Scheme (string) --
The nodes of an Internet-facing load balancer have public IP addresses.
SecurityGroups (list) --
The IDs of the security groups for the load balancer.
State (dict) --
The state of the load balancer.
Code (string) --
The state code. The initial state of the load balancer is provisioning.
After the load balancer is fully set up and ready to route traffic, its state is active.
If the load balancer could not be set up, its state is failed.
Reason (string) --
A description of the state.
Type (string) --
The type of load balancer.
VpcId (string) --
The ID of the VPC for the load balancer.
LoadBalancerAttributes (list) --
Attributes of the load balancer.
(dict) --
A load balancer attribute.
Key (string) --
The name of the load balancer attribute.
Value (string) --
The value of the load balancer attribute.
AwsElasticBeanstalkEnvironment (dict) --
Details about an Elastic Beanstalk environment.
ApplicationName (string) --
The name of the application that is associated with the environment.
Cname (string) --
The URL to the CNAME for this environment.
DateCreated (string) --
The creation date for this environment.
DateUpdated (string) --
The date when this environment was last modified.
Description (string) --
A description of the environment.
EndpointUrl (string) --
For load-balanced, autoscaling environments, the URL to the load balancer. For single-instance environments, the IP address of the instance.
EnvironmentArn (string) --
The ARN of the environment.
EnvironmentId (string) --
The identifier of the environment.
EnvironmentLinks (list) --
Links to other environments in the same group.
(dict) --
Contains information about a link to another environment that is in the same group.
EnvironmentName (string) --
The name of the linked environment.
LinkName (string) --
The name of the environment link.
EnvironmentName (string) --
The name of the environment.
OptionSettings (list) --
The configuration setting for the environment.
(dict) --
A configuration option setting for the environment.
Namespace (string) --
The type of resource that the configuration option is associated with.
OptionName (string) --
The name of the option.
ResourceName (string) --
The name of the resource.
Value (string) --
The value of the configuration setting.
PlatformArn (string) --
The ARN of the platform version for the environment.
SolutionStackName (string) --
The name of the solution stack that is deployed with the environment.
Status (string) --
The current operational status of the environment.
Tier (dict) --
The tier of the environment.
Name (string) --
The name of the environment tier.
Type (string) --
The type of environment tier.
Version (string) --
The version of the environment tier.
VersionLabel (string) --
The application version of the environment.
AwsElasticsearchDomain (dict) --
Details for an Elasticsearch domain.
AccessPolicies (string) --
IAM policy document specifying the access policies for the new Elasticsearch domain.
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
Valid values:
Policy-Min-TLS-1-0-2019-07 , which supports TLSv1.0 and higherPolicy-Min-TLS-1-2-2019-07 , which only supports TLSv1.2DomainId (string) --
Unique identifier for an Elasticsearch domain.
DomainName (string) --
Name of an Elasticsearch domain.
Domain names are unique across all domains owned by the same account within an Amazon Web Services Region.
Domain names must start with a lowercase letter and must be between 3 and 28 characters.
Valid characters are a-z (lowercase only), 0-9, and – (hyphen).
Endpoint (string) --
Domain-specific endpoint used to submit index, search, and data upload requests to an Elasticsearch domain.
The endpoint is a service URL.
Endpoints (dict) --
The key-value pair that exists if the Elasticsearch domain uses VPC endpoints.
ElasticsearchVersion (string) --
OpenSearch version.
ElasticsearchClusterConfig (dict) --
Information about an OpenSearch cluster configuration.
DedicatedMasterCount (integer) --
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
DedicatedMasterEnabled (boolean) --
Whether to use a dedicated master node for the Elasticsearch domain. A dedicated master node performs cluster management tasks, but doesn't hold data or respond to data upload requests.
DedicatedMasterType (string) --
The hardware configuration of the computer that hosts the dedicated master node. For example, m3.medium.elasticsearch . If this attribute is specified, then DedicatedMasterEnabled must be true .
InstanceCount (integer) --
The number of data nodes to use in the Elasticsearch domain.
InstanceType (string) --
The instance type for your data nodes. For example, m3.medium.elasticsearch .
ZoneAwarenessConfig (dict) --
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
AvailabilityZoneCount (integer) --
he number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
ZoneAwarenessEnabled (boolean) --
Whether to enable zone awareness for the Elasticsearch domain. When zone awareness is enabled, OpenSearch allocates the cluster's nodes and replica index shards across Availability Zones in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID. Takes the form 1a2a3a4-1a2a-3a4a-5a6a-1a2a3a4a5a6a .
LogPublishingOptions (dict) --
Configures the CloudWatch Logs to publish for the Elasticsearch domain.
IndexSlowLogs (dict) --
Configures the OpenSearch index logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
SearchSlowLogs (dict) --
Configures the OpenSearch search slow log publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
AuditLogs (dict) --
The log configuration.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
ServiceSoftwareOptions (dict) --
Information about the status of a domain relative to the latest service software.
AutomatedUpdateDate (string) --
The epoch time when the deployment window closes for required updates. After this time, Amazon OpenSearch Service schedules the software upgrade automatically.
Cancellable (boolean) --
Whether a request to update the domain can be canceled.
CurrentVersion (string) --
The version of the service software that is currently installed on the domain.
Description (string) --
A more detailed description of the service software status.
NewVersion (string) --
The most recent version of the service software.
UpdateAvailable (boolean) --
Whether a service software update is available for the domain.
UpdateStatus (string) --
The status of the service software update.
VPCOptions (dict) --
Information that OpenSearch derives based on VPCOptions for the domain.
AvailabilityZones (list) --
The list of Availability Zones associated with the VPC subnets.
SecurityGroupIds (list) --
The list of security group IDs associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs associated with the VPC endpoints for the domain.
VPCId (string) --
ID for the VPC.
AwsS3Bucket (dict) --
Details about an S3 bucket related to a finding.
OwnerId (string) --
The canonical user ID of the owner of the S3 bucket.
OwnerName (string) --
The display name of the owner of the S3 bucket.
OwnerAccountId (string) --
The Amazon Web Services account identifier of the account that owns the S3 bucket.
CreatedAt (string) --
Indicates when the S3 bucket was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ServerSideEncryptionConfiguration (dict) --
The encryption rules that are applied to the S3 bucket.
Rules (list) --
The encryption rules that are applied to the S3 bucket.
(dict) --
An encryption rule to apply to the S3 bucket.
ApplyServerSideEncryptionByDefault (dict) --
Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT object request doesn't specify any server-side encryption, this default encryption is applied.
SSEAlgorithm (string) --
Server-side encryption algorithm to use for the default encryption.
KMSMasterKeyID (string) --
KMS key ID to use for the default encryption.
BucketLifecycleConfiguration (dict) --
The lifecycle configuration for objects in the S3 bucket.
Rules (list) --
The lifecycle rules.
(dict) --
Configuration for a lifecycle rule.
AbortIncompleteMultipartUpload (dict) --
How Amazon S3 responds when a multipart upload is incomplete. Specifically, provides a number of days before Amazon S3 cancels the entire upload.
DaysAfterInitiation (integer) --
The number of days after which Amazon S3 cancels an incomplete multipart upload.
ExpirationDate (string) --
The date when objects are moved or deleted.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ExpirationInDays (integer) --
The length in days of the lifetime for objects that are subject to the rule.
ExpiredObjectDeleteMarker (boolean) --
Whether Amazon S3 removes a delete marker that has no noncurrent versions. If set to true , the delete marker is expired. If set to false , the policy takes no action.
If you provide ExpiredObjectDeleteMarker , you cannot provide ExpirationInDays or ExpirationDate .
Filter (dict) --
Identifies the objects that a rule applies to.
Predicate (dict) --
The configuration for the filter.
Operands (list) --
The values to use for the filter.
(dict) --
A value to use for the filter.
Prefix (string) --
Prefix text for matching objects.
Tag (dict) --
A tag that is assigned to matching objects.
Key (string) --
The tag key.
Value (string) --
The tag value.
Type (string) --
The type of filter value.
Prefix (string) --
A prefix filter.
Tag (dict) --
A tag filter.
Key (string) --
The tag key.
Value (string) --
The tag value
Type (string) --
Whether to use AND or OR to join the operands.
ID (string) --
The unique identifier of the rule.
NoncurrentVersionExpirationInDays (integer) --
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
NoncurrentVersionTransitions (list) --
Transition rules that describe when noncurrent objects transition to a specified storage class.
(dict) --
A transition rule that describes when noncurrent objects transition to a specified storage class.
Days (integer) --
The number of days that an object is noncurrent before Amazon S3 can perform the associated action.
StorageClass (string) --
The class of storage to change the object to after the object is noncurrent for the specified number of days.
Prefix (string) --
A prefix that identifies one or more objects that the rule applies to.
Status (string) --
The current status of the rule. Indicates whether the rule is currently being applied.
Transitions (list) --
Transition rules that indicate when objects transition to a specified storage class.
(dict) --
A rule for when objects transition to specific storage classes.
Date (string) --
A date on which to transition objects to the specified storage class. If you provide Date , you cannot provide Days .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Days (integer) --
The number of days after which to transition the object to the specified storage class. If you provide Days , you cannot provide Date .
StorageClass (string) --
The storage class to transition the object to.
PublicAccessBlockConfiguration (dict) --
Provides information about the Amazon S3 Public Access Block configuration for the S3 bucket.
BlockPublicAcls (boolean) --
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
BlockPublicPolicy (boolean) --
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
IgnorePublicAcls (boolean) --
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
RestrictPublicBuckets (boolean) --
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
AccessControlList (string) --
The access control list for the S3 bucket.
BucketLoggingConfiguration (dict) --
The logging configuration for the S3 bucket.
DestinationBucketName (string) --
The name of the S3 bucket where log files for the S3 bucket are stored.
LogFilePrefix (string) --
The prefix added to log files for the S3 bucket.
BucketWebsiteConfiguration (dict) --
The website configuration parameters for the S3 bucket.
ErrorDocument (string) --
The name of the error document for the website.
IndexDocumentSuffix (string) --
The name of the index document for the website.
RedirectAllRequestsTo (dict) --
The redirect behavior for requests to the website.
Hostname (string) --
The name of the host to redirect requests to.
Protocol (string) --
The protocol to use when redirecting requests. By default, uses the same protocol as the original request.
RoutingRules (list) --
The rules for applying redirects for requests to the website.
(dict) --
A rule for redirecting requests to the website.
Condition (dict) --
Provides the condition that must be met in order to apply the routing rule.
HttpErrorCodeReturnedEquals (string) --
Indicates to redirect the request if the HTTP error code matches this value.
KeyPrefixEquals (string) --
Indicates to redirect the request if the key prefix matches this value.
Redirect (dict) --
Provides the rules to redirect the request if the condition in Condition is met.
Hostname (string) --
The host name to use in the redirect request.
HttpRedirectCode (string) --
The HTTP redirect code to use in the response.
Protocol (string) --
The protocol to use to redirect the request. By default, uses the protocol from the original request.
ReplaceKeyPrefixWith (string) --
The object key prefix to use in the redirect request.
Cannot be provided if ReplaceKeyWith is present.
ReplaceKeyWith (string) --
The specific object key to use in the redirect request.
Cannot be provided if ReplaceKeyPrefixWith is present.
BucketNotificationConfiguration (dict) --
The notification configuration for the S3 bucket.
Configurations (list) --
Configurations for S3 bucket notifications.
(dict) --
Details for an S3 bucket notification configuration.
Events (list) --
The list of events that trigger a notification.
Filter (dict) --
The filters that determine which S3 buckets generate notifications.
S3KeyFilter (dict) --
Details for an Amazon S3 filter.
FilterRules (list) --
The filter rules for the filter.
(dict) --
Details for a filter rule.
Name (string) --
Indicates whether the filter is based on the prefix or suffix of the Amazon S3 key.
Value (string) --
The filter value.
Destination (string) --
The ARN of the Lambda function, Amazon SQS queue, or Amazon SNS topic that generates the notification.
Type (string) --
Indicates the type of notification. Notifications can be generated using Lambda functions, Amazon SQS queues or Amazon SNS topics.
BucketVersioningConfiguration (dict) --
The versioning state of an S3 bucket.
IsMfaDeleteEnabled (boolean) --
Specifies whether MFA delete is currently enabled in the S3 bucket versioning configuration. If the S3 bucket was never configured with MFA delete, then this attribute is not included.
Status (string) --
The versioning status of the S3 bucket.
AwsS3AccountPublicAccessBlock (dict) --
Details about the Amazon S3 Public Access Block configuration for an account.
BlockPublicAcls (boolean) --
Indicates whether to reject calls to update an S3 bucket if the calls include a public access control list (ACL).
BlockPublicPolicy (boolean) --
Indicates whether to reject calls to update the access policy for an S3 bucket or access point if the policy allows public access.
IgnorePublicAcls (boolean) --
Indicates whether Amazon S3 ignores public ACLs that are associated with an S3 bucket.
RestrictPublicBuckets (boolean) --
Indicates whether to restrict access to an access point or S3 bucket that has a public policy to only Amazon Web Services service principals and authorized users within the S3 bucket owner's account.
AwsS3Object (dict) --
Details about an S3 object related to a finding.
LastModified (string) --
Indicates when the object was last modified.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ETag (string) --
The opaque identifier assigned by a web server to a specific version of a resource found at a URL.
VersionId (string) --
The version of the object.
ContentType (string) --
A standard MIME type describing the format of the object data.
ServerSideEncryption (string) --
If the object is stored using server-side encryption, the value of the server-side encryption algorithm used when storing this object in Amazon S3.
SSEKMSKeyId (string) --
The identifier of the KMS symmetric customer managed key that was used for the object.
AwsSecretsManagerSecret (dict) --
Details about a Secrets Manager secret.
RotationRules (dict) --
Defines the rotation schedule for the secret.
AutomaticallyAfterDays (integer) --
The number of days after the previous rotation to rotate the secret.
RotationOccurredWithinFrequency (boolean) --
Whether the rotation occurred within the specified rotation frequency.
KmsKeyId (string) --
The ARN, Key ID, or alias of the KMS key used to encrypt the SecretString or SecretBinary values for versions of this secret.
RotationEnabled (boolean) --
Whether rotation is enabled.
RotationLambdaArn (string) --
The ARN of the Lambda function that rotates the secret.
Deleted (boolean) --
Whether the secret is deleted.
Name (string) --
The name of the secret.
Description (string) --
The user-provided description of the secret.
AwsIamAccessKey (dict) --
Details about an IAM access key related to a finding.
UserName (string) --
The user associated with the IAM access key related to a finding.
The UserName parameter has been replaced with the PrincipalName parameter because access keys can also be assigned to principals that are not IAM users.
Status (string) --
The status of the IAM access key related to a finding.
CreatedAt (string) --
Indicates when the IAM access key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
PrincipalId (string) --
The ID of the principal associated with an access key.
PrincipalType (string) --
The type of principal associated with an access key.
PrincipalName (string) --
The name of the principal.
AccountId (string) --
The Amazon Web Services account ID of the account for the key.
AccessKeyId (string) --
The identifier of the access key.
SessionContext (dict) --
Information about the session that the key was used for.
Attributes (dict) --
Attributes of the session that the key was used for.
MfaAuthenticated (boolean) --
Indicates whether the session used multi-factor authentication (MFA).
CreationDate (string) --
Indicates when the session was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
SessionIssuer (dict) --
Information about the entity that created the session.
Type (string) --
The type of principal (user, role, or group) that created the session.
PrincipalId (string) --
The principal ID of the principal (user, role, or group) that created the session.
Arn (string) --
The ARN of the session.
AccountId (string) --
The identifier of the Amazon Web Services account that created the session.
UserName (string) --
The name of the principal that created the session.
AwsIamUser (dict) --
Details about an IAM user.
AttachedManagedPolicies (list) --
A list of the managed policies that are attached to the user.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the user was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GroupList (list) --
A list of IAM groups that the user belongs to.
Path (string) --
The path to the user.
PermissionsBoundary (dict) --
The permissions boundary for the user.
PermissionsBoundaryArn (string) --
The ARN of the policy used to set the permissions boundary.
PermissionsBoundaryType (string) --
The usage type for the permissions boundary.
UserId (string) --
The unique identifier for the user.
UserName (string) --
The name of the user.
UserPolicyList (list) --
The list of inline policies that are embedded in the user.
(dict) --
Information about an inline policy that is embedded in the user.
PolicyName (string) --
The name of the policy.
AwsIamPolicy (dict) --
Details about an IAM permissions policy.
AttachmentCount (integer) --
The number of users, groups, and roles that the policy is attached to.
CreateDate (string) --
When the policy was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DefaultVersionId (string) --
The identifier of the default version of the policy.
Description (string) --
A description of the policy.
IsAttachable (boolean) --
Whether the policy can be attached to a user, group, or role.
Path (string) --
The path to the policy.
PermissionsBoundaryUsageCount (integer) --
The number of users and roles that use the policy to set the permissions boundary.
PolicyId (string) --
The unique identifier of the policy.
PolicyName (string) --
The name of the policy.
PolicyVersionList (list) --
List of versions of the policy.
(dict) --
A version of an IAM policy.
VersionId (string) --
The identifier of the policy version.
IsDefaultVersion (boolean) --
Whether the version is the default version.
CreateDate (string) --
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
UpdateDate (string) --
When the policy was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsApiGatewayV2Stage (dict) --
Provides information about a version 2 stage for Amazon API Gateway.
ClientCertificateId (string) --
The identifier of a client certificate for a stage. Supported only for WebSocket API calls.
CreatedDate (string) --
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Description (string) --
The description of the stage.
DefaultRouteSettings (dict) --
Default route settings for the stage.
DetailedMetricsEnabled (boolean) --
Indicates whether detailed metrics are enabled.
LoggingLevel (string) --
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
ThrottlingBurstLimit (integer) --
The throttling burst limit.
ThrottlingRateLimit (float) --
The throttling rate limit.
DeploymentId (string) --
The identifier of the deployment that the stage is associated with.
LastUpdatedDate (string) --
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RouteSettings (dict) --
The route settings for the stage.
DetailedMetricsEnabled (boolean) --
Indicates whether detailed metrics are enabled.
LoggingLevel (string) --
The logging level. The logging level affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled. Data trace logging affects the log entries that are pushed to CloudWatch Logs. Supported only for WebSocket APIs.
ThrottlingBurstLimit (integer) --
The throttling burst limit.
ThrottlingRateLimit (float) --
The throttling rate limit.
StageName (string) --
The name of the stage.
StageVariables (dict) --
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
AccessLogSettings (dict) --
Information about settings for logging access for the stage.
Format (string) --
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
DestinationArn (string) --
The ARN of the CloudWatch Logs log group that receives the access logs.
AutoDeploy (boolean) --
Indicates whether updates to an API automatically trigger a new deployment.
LastDeploymentStatusMessage (string) --
The status of the last deployment of a stage. Supported only if the stage has automatic deployment enabled.
ApiGatewayManaged (boolean) --
Indicates whether the stage is managed by API Gateway.
AwsApiGatewayV2Api (dict) --
Provides information about a version 2 API in Amazon API Gateway.
ApiEndpoint (string) --
The URI of the API.
Uses the format `` <api-id> .execute-api.*<region>* .amazonaws.com``
The stage name is typically appended to the URI to form a complete path to a deployed API stage.
ApiId (string) --
The identifier of the API.
ApiKeySelectionExpression (string) --
An API key selection expression. Supported only for WebSocket APIs.
CreatedDate (string) --
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Description (string) --
A description of the API.
Version (string) --
The version identifier for the API.
Name (string) --
The name of the API.
ProtocolType (string) --
The API protocol for the API.
Valid values: WEBSOCKET | HTTP
RouteSelectionExpression (string) --
The route selection expression for the API.
For HTTP APIs, must be ${request.method} ${request.path} . This is the default value for HTTP APIs.
For WebSocket APIs, there is no default value.
CorsConfiguration (dict) --
A cross-origin resource sharing (CORS) configuration. Supported only for HTTP APIs.
AllowOrigins (list) --
The allowed origins for CORS requests.
AllowCredentials (boolean) --
Indicates whether the CORS request includes credentials.
ExposeHeaders (list) --
The exposed headers for CORS requests.
MaxAge (integer) --
The number of seconds for which the browser caches preflight request results.
AllowMethods (list) --
The allowed methods for CORS requests.
AllowHeaders (list) --
The allowed headers for CORS requests.
AwsDynamoDbTable (dict) --
Details about a DynamoDB table.
AttributeDefinitions (list) --
A list of attribute definitions for the table.
(dict) --
Contains a definition of an attribute for the table.
AttributeName (string) --
The name of the attribute.
AttributeType (string) --
The type of the attribute.
BillingModeSummary (dict) --
Information about the billing for read/write capacity on the table.
BillingMode (string) --
The method used to charge for read and write throughput and to manage capacity.
LastUpdateToPayPerRequestDateTime (string) --
If the billing mode is PAY_PER_REQUEST , indicates when the billing mode was set to that value.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
CreationDateTime (string) --
Indicates when the table was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GlobalSecondaryIndexes (list) --
List of global secondary indexes for the table.
(dict) --
Information abut a global secondary index for the table.
Backfilling (boolean) --
Whether the index is currently backfilling.
IndexArn (string) --
The ARN of the index.
IndexName (string) --
The name of the index.
IndexSizeBytes (integer) --
The total size in bytes of the index.
IndexStatus (string) --
The current status of the index.
ItemCount (integer) --
The number of items in the index.
KeySchema (list) --
The key schema for the index.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
Projection (dict) --
Attributes that are copied from the table into an index.
NonKeyAttributes (list) --
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
ProjectionType (string) --
The types of attributes that are projected into the index.
ProvisionedThroughput (dict) --
Information about the provisioned throughput settings for the indexes.
LastDecreaseDateTime (string) --
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastIncreaseDateTime (string) --
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NumberOfDecreasesToday (integer) --
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
ReadCapacityUnits (integer) --
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
WriteCapacityUnits (integer) --
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
GlobalTableVersion (string) --
The version of global tables being used.
ItemCount (integer) --
The number of items in the table.
KeySchema (list) --
The primary key structure for the table.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
LatestStreamArn (string) --
The ARN of the latest stream for the table.
LatestStreamLabel (string) --
The label of the latest stream. The label is not a unique identifier.
LocalSecondaryIndexes (list) --
The list of local secondary indexes for the table.
(dict) --
Information about a local secondary index for a DynamoDB table.
IndexArn (string) --
The ARN of the index.
IndexName (string) --
The name of the index.
KeySchema (list) --
The complete key schema for the index.
(dict) --
A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.
AttributeName (string) --
The name of the key schema attribute.
KeyType (string) --
The type of key used for the key schema attribute.
Projection (dict) --
Attributes that are copied from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected.
NonKeyAttributes (list) --
The nonkey attributes that are projected into the index. For each attribute, provide the attribute name.
ProjectionType (string) --
The types of attributes that are projected into the index.
ProvisionedThroughput (dict) --
Information about the provisioned throughput for the table.
LastDecreaseDateTime (string) --
Indicates when the provisioned throughput was last decreased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastIncreaseDateTime (string) --
Indicates when the provisioned throughput was last increased.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NumberOfDecreasesToday (integer) --
The number of times during the current UTC calendar day that the provisioned throughput was decreased.
ReadCapacityUnits (integer) --
The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException .
WriteCapacityUnits (integer) --
The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException .
Replicas (list) --
The list of replicas of this table.
(dict) --
Information about a replica of a DynamoDB table.
GlobalSecondaryIndexes (list) --
List of global secondary indexes for the replica.
(dict) --
Information about a global secondary index for a DynamoDB table replica.
IndexName (string) --
The name of the index.
ProvisionedThroughputOverride (dict) --
Replica-specific configuration for the provisioned throughput for the index.
ReadCapacityUnits (integer) --
The read capacity units for the replica.
KmsMasterKeyId (string) --
The identifier of the KMS key that will be used for KMS encryption for the replica.
ProvisionedThroughputOverride (dict) --
Replica-specific configuration for the provisioned throughput.
ReadCapacityUnits (integer) --
The read capacity units for the replica.
RegionName (string) --
The name of the Region where the replica is located.
ReplicaStatus (string) --
The current status of the replica.
ReplicaStatusDescription (string) --
Detailed information about the replica status.
RestoreSummary (dict) --
Information about the restore for the table.
SourceBackupArn (string) --
The ARN of the source backup from which the table was restored.
SourceTableArn (string) --
The ARN of the source table for the backup.
RestoreDateTime (string) --
Indicates the point in time that the table was restored to.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RestoreInProgress (boolean) --
Whether a restore is currently in progress.
SseDescription (dict) --
Information about the server-side encryption for the table.
InaccessibleEncryptionDateTime (string) --
If the key is inaccessible, the date and time when DynamoDB detected that the key was inaccessible.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Status (string) --
The status of the server-side encryption.
SseType (string) --
The type of server-side encryption.
KmsMasterKeyArn (string) --
The ARN of the KMS key that is used for the KMS encryption.
StreamSpecification (dict) --
The current DynamoDB Streams configuration for the table.
StreamEnabled (boolean) --
Indicates whether DynamoDB Streams is enabled on the table.
StreamViewType (string) --
Determines the information that is written to the table.
TableId (string) --
The identifier of the table.
TableName (string) --
The name of the table.
TableSizeBytes (integer) --
The total size of the table in bytes.
TableStatus (string) --
The current status of the table.
AwsApiGatewayStage (dict) --
Provides information about a version 1 Amazon API Gateway stage.
DeploymentId (string) --
The identifier of the deployment that the stage points to.
ClientCertificateId (string) --
The identifier of the client certificate for the stage.
StageName (string) --
The name of the stage.
Description (string) --
A description of the stage.
CacheClusterEnabled (boolean) --
Indicates whether a cache cluster is enabled for the stage.
CacheClusterSize (string) --
If a cache cluster is enabled, the size of the cache cluster.
CacheClusterStatus (string) --
If a cache cluster is enabled, the status of the cache cluster.
MethodSettings (list) --
Defines the method settings for the stage.
(dict) --
Defines settings for a method for the stage.
MetricsEnabled (boolean) --
Indicates whether CloudWatch metrics are enabled for the method.
LoggingLevel (string) --
The logging level for this method. The logging level affects the log entries that are pushed to CloudWatch Logs.
If the logging level is ERROR , then the logs only include error-level entries.
If the logging level is INFO , then the logs include both ERROR events and extra informational events.
Valid values: OFF | ERROR | INFO
DataTraceEnabled (boolean) --
Indicates whether data trace logging is enabled for the method. Data trace logging affects the log entries that are pushed to CloudWatch Logs.
ThrottlingBurstLimit (integer) --
The throttling burst limit for the method.
ThrottlingRateLimit (float) --
The throttling rate limit for the method.
CachingEnabled (boolean) --
Indicates whether responses are cached and returned for requests. For responses to be cached, a cache cluster must be enabled on the stage.
CacheTtlInSeconds (integer) --
Specifies the time to live (TTL), in seconds, for cached responses. The higher the TTL, the longer the response is cached.
CacheDataEncrypted (boolean) --
Indicates whether the cached responses are encrypted.
RequireAuthorizationForCacheControl (boolean) --
Indicates whether authorization is required for a cache invalidation request.
UnauthorizedCacheControlHeaderStrategy (string) --
Indicates how to handle unauthorized requests for cache invalidation.
Valid values: FAIL_WITH_403 | SUCCEED_WITH_RESPONSE_HEADER | SUCCEED_WITHOUT_RESPONSE_HEADER
HttpMethod (string) --
The HTTP method. You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
ResourcePath (string) --
The resource path for this method. Forward slashes (/) are encoded as ~1 . The initial slash must include a forward slash.
For example, the path value /resource/subresource must be encoded as /~1resource~1subresource .
To specify the root path, use only a slash (/). You can use an asterisk (*) as a wildcard to apply method settings to multiple methods.
Variables (dict) --
A map that defines the stage variables for the stage.
Variable names can have alphanumeric and underscore characters.
Variable values can contain the following characters:
DocumentationVersion (string) --
The version of the API documentation that is associated with the stage.
AccessLogSettings (dict) --
Settings for logging access for the stage.
Format (string) --
A single-line format of the access logs of data, as specified by selected $context variables. The format must include at least $context.requestId .
DestinationArn (string) --
The ARN of the CloudWatch Logs log group that receives the access logs.
CanarySettings (dict) --
Information about settings for canary deployment in the stage.
PercentTraffic (float) --
The percentage of traffic that is diverted to a canary deployment.
DeploymentId (string) --
The deployment identifier for the canary deployment.
StageVariableOverrides (dict) --
Stage variables that are overridden in the canary release deployment. The variables include new stage variables that are introduced in the canary.
Each variable is represented as a string-to-string map between the stage variable name and the variable value.
UseStageCache (boolean) --
Indicates whether the canary deployment uses the stage cache.
TracingEnabled (boolean) --
Indicates whether active tracing with X-Ray is enabled for the stage.
CreatedDate (string) --
Indicates when the stage was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastUpdatedDate (string) --
Indicates when the stage was most recently updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
WebAclArn (string) --
The ARN of the web ACL associated with the stage.
AwsApiGatewayRestApi (dict) --
Provides information about a REST API in version 1 of Amazon API Gateway.
Id (string) --
The identifier of the REST API.
Name (string) --
The name of the REST API.
Description (string) --
A description of the REST API.
CreatedDate (string) --
Indicates when the API was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Version (string) --
The version identifier for the REST API.
BinaryMediaTypes (list) --
The list of binary media types supported by the REST API.
MinimumCompressionSize (integer) --
The minimum size in bytes of a payload before compression is enabled.
If null , then compression is disabled.
If 0, then all payloads are compressed.
ApiKeySource (string) --
The source of the API key for metering requests according to a usage plan.
HEADERindicates whether to read the API key from the X-API-Key header of a request.
AUTHORIZERindicates whether to read the API key from theUsageIdentifierKeyfrom a custom authorizer.
EndpointConfiguration (dict) --
The endpoint configuration of the REST API.
Types (list) --
A list of endpoint types for the REST API.
For an edge-optimized API, the endpoint type is EDGE . For a Regional API, the endpoint type is REGIONAL . For a private API, the endpoint type is PRIVATE .
AwsCloudTrailTrail (dict) --
Provides details about a CloudTrail trail.
CloudWatchLogsLogGroupArn (string) --
The ARN of the log group that CloudTrail logs are delivered to.
CloudWatchLogsRoleArn (string) --
The ARN of the role that the CloudWatch Events endpoint assumes when it writes to the log group.
HasCustomEventSelectors (boolean) --
Indicates whether the trail has custom event selectors.
HomeRegion (string) --
The Region where the trail was created.
IncludeGlobalServiceEvents (boolean) --
Indicates whether the trail publishes events from global services such as IAM to the log files.
IsMultiRegionTrail (boolean) --
Indicates whether the trail applies only to the current Region or to all Regions.
IsOrganizationTrail (boolean) --
Whether the trail is created for all accounts in an organization in Organizations, or only for the current Amazon Web Services account.
KmsKeyId (string) --
The KMS key ID to use to encrypt the logs.
LogFileValidationEnabled (boolean) --
Indicates whether CloudTrail log file validation is enabled.
Name (string) --
The name of the trail.
S3BucketName (string) --
The name of the S3 bucket where the log files are published.
S3KeyPrefix (string) --
The S3 key prefix. The key prefix is added after the name of the S3 bucket where the log files are published.
SnsTopicArn (string) --
The ARN of the SNS topic that is used for notifications of log file delivery.
SnsTopicName (string) --
The name of the SNS topic that is used for notifications of log file delivery.
TrailArn (string) --
The ARN of the trail.
AwsSsmPatchCompliance (dict) --
Provides information about the state of a patch on an instance based on the patch baseline that was used to patch the instance.
Patch (dict) --
Information about the status of a patch.
ComplianceSummary (dict) --
The compliance status details for the patch.
Status (string) --
The current patch compliance status.
The possible status values are:
COMPLIANTNON_COMPLIANTUNSPECIFIED_DATACompliantCriticalCount (integer) --
For the patches that are compliant, the number that have a severity of CRITICAL .
CompliantHighCount (integer) --
For the patches that are compliant, the number that have a severity of HIGH .
CompliantMediumCount (integer) --
For the patches that are compliant, the number that have a severity of MEDIUM .
ExecutionType (string) --
The type of execution that was used determine compliance.
NonCompliantCriticalCount (integer) --
For the patch items that are noncompliant, the number of items that have a severity of CRITICAL .
CompliantInformationalCount (integer) --
For the patches that are compliant, the number that have a severity of INFORMATIONAL .
NonCompliantInformationalCount (integer) --
For the patches that are noncompliant, the number that have a severity of INFORMATIONAL .
CompliantUnspecifiedCount (integer) --
For the patches that are compliant, the number that have a severity of UNSPECIFIED .
NonCompliantLowCount (integer) --
For the patches that are noncompliant, the number that have a severity of LOW .
NonCompliantHighCount (integer) --
For the patches that are noncompliant, the number that have a severity of HIGH .
CompliantLowCount (integer) --
For the patches that are compliant, the number that have a severity of LOW .
ComplianceType (string) --
The type of resource for which the compliance was determined. For AwsSsmPatchCompliance , ComplianceType is Patch .
PatchBaselineId (string) --
The identifier of the patch baseline. The patch baseline lists the patches that are approved for installation.
OverallSeverity (string) --
The highest severity for the patches.
NonCompliantMediumCount (integer) --
For the patches that are noncompliant, the number that have a severity of MEDIUM .
NonCompliantUnspecifiedCount (integer) --
For the patches that are noncompliant, the number that have a severity of UNSPECIFIED .
PatchGroup (string) --
The identifier of the patch group for which compliance was determined. A patch group uses tags to group EC2 instances that should have the same patch compliance.
AwsCertificateManagerCertificate (dict) --
Provides details about an Certificate Manager certificate.
CertificateAuthorityArn (string) --
The ARN of the private certificate authority (CA) that will be used to issue the certificate.
CreatedAt (string) --
Indicates when the certificate was requested.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DomainName (string) --
The fully qualified domain name (FQDN), such as www.example.com, that is secured by the certificate.
DomainValidationOptions (list) --
Contains information about the initial validation of each domain name that occurs as a result of the RequestCertificate request.
Only provided if the certificate type is AMAZON_ISSUED .
(dict) --
Contains information about one of the following:
RequestCertificate requestDomainName (string) --
A fully qualified domain name (FQDN) in the certificate.
ResourceRecord (dict) --
The CNAME record that is added to the DNS database for domain validation.
Name (string) --
The name of the resource.
Type (string) --
The type of resource.
Value (string) --
The value of the resource.
ValidationDomain (string) --
The domain name that Certificate Manager uses to send domain validation emails.
ValidationEmails (list) --
A list of email addresses that Certificate Manager uses to send domain validation emails.
ValidationMethod (string) --
The method used to validate the domain name.
ValidationStatus (string) --
The validation status of the domain name.
ExtendedKeyUsages (list) --
Contains a list of Extended Key Usage X.509 v3 extension objects. Each object specifies a purpose for which the certificate public key can be used and consists of a name and an object identifier (OID).
(dict) --
Contains information about an extended key usage X.509 v3 extension object.
Name (string) --
The name of an extension value. Indicates the purpose for which the certificate public key can be used.
OId (string) --
An object identifier (OID) for the extension value.
The format is numbers separated by periods.
FailureReason (string) --
For a failed certificate request, the reason for the failure.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
ImportedAt (string) --
Indicates when the certificate was imported. Provided if the certificate type is IMPORTED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InUseBy (list) --
The list of ARNs for the Amazon Web Services resources that use the certificate.
IssuedAt (string) --
Indicates when the certificate was issued. Provided if the certificate type is AMAZON_ISSUED .
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Issuer (string) --
The name of the certificate authority that issued and signed the certificate.
KeyAlgorithm (string) --
The algorithm that was used to generate the public-private key pair.
Valid values: RSA_2048 | RSA_1024 |RSA_4096 | EC_prime256v1 | EC_secp384r1 | EC_secp521r1
KeyUsages (list) --
A list of key usage X.509 v3 extension objects.
(dict) --
Contains information about a key usage X.509 v3 extension object.
Name (string) --
The key usage extension name.
NotAfter (string) --
The time after which the certificate becomes invalid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NotBefore (string) --
The time before which the certificate is not valid.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Options (dict) --
Provides a value that specifies whether to add the certificate to a transparency log.
CertificateTransparencyLoggingPreference (string) --
Whether to add the certificate to a transparency log.
Valid values: DISABLED | ENABLED
RenewalEligibility (string) --
Whether the certificate is eligible for renewal.
Valid values: ELIGIBLE | INELIGIBLE
RenewalSummary (dict) --
Information about the status of the Certificate Manager managed renewal for the certificate. Provided only when the certificate type is AMAZON_ISSUED .
DomainValidationOptions (list) --
Information about the validation of each domain name in the certificate, as it pertains to Certificate Manager managed renewal. Provided only when the certificate type is AMAZON_ISSUED .
(dict) --
Contains information about one of the following:
RequestCertificate requestDomainName (string) --
A fully qualified domain name (FQDN) in the certificate.
ResourceRecord (dict) --
The CNAME record that is added to the DNS database for domain validation.
Name (string) --
The name of the resource.
Type (string) --
The type of resource.
Value (string) --
The value of the resource.
ValidationDomain (string) --
The domain name that Certificate Manager uses to send domain validation emails.
ValidationEmails (list) --
A list of email addresses that Certificate Manager uses to send domain validation emails.
ValidationMethod (string) --
The method used to validate the domain name.
ValidationStatus (string) --
The validation status of the domain name.
RenewalStatus (string) --
The status of the Certificate Manager managed renewal of the certificate.
Valid values: PENDING_AUTO_RENEWAL | PENDING_VALIDATION | SUCCESS | FAILED
RenewalStatusReason (string) --
The reason that a renewal request was unsuccessful.
Valid values: NO_AVAILABLE_CONTACTS | ADDITIONAL_VERIFICATION_REQUIRED | DOMAIN_NOT_ALLOWED | INVALID_PUBLIC_DOMAIN | DOMAIN_VALIDATION_DENIED | CAA_ERROR | PCA_LIMIT_EXCEEDED | PCA_INVALID_ARN | PCA_INVALID_STATE | PCA_REQUEST_FAILED | PCA_NAME_CONSTRAINTS_VALIDATION | PCA_RESOURCE_NOT_FOUND | PCA_INVALID_ARGS | PCA_INVALID_DURATION | PCA_ACCESS_DENIED | SLR_NOT_FOUND | OTHER
UpdatedAt (string) --
Indicates when the renewal summary was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Serial (string) --
The serial number of the certificate.
SignatureAlgorithm (string) --
The algorithm that was used to sign the certificate.
Status (string) --
The status of the certificate.
Valid values: PENDING_VALIDATION | ISSUED | INACTIVE | EXPIRED | VALIDATION_TIMED_OUT | REVOKED | FAILED
Subject (string) --
The name of the entity that is associated with the public key contained in the certificate.
SubjectAlternativeNames (list) --
One or more domain names (subject alternative names) included in the certificate. This list contains the domain names that are bound to the public key that is contained in the certificate.
The subject alternative names include the canonical domain name (CN) of the certificate and additional domain names that can be used to connect to the website.
Type (string) --
The source of the certificate. For certificates that Certificate Manager provides, Type is AMAZON_ISSUED . For certificates that are imported with ImportCertificate , Type is IMPORTED .
Valid values: IMPORTED | AMAZON_ISSUED | PRIVATE
AwsRedshiftCluster (dict) --
Contains details about an Amazon Redshift cluster.
AllowVersionUpgrade (boolean) --
Indicates whether major version upgrades are applied automatically to the cluster during the maintenance window.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
ClusterAvailabilityStatus (string) --
The availability status of the cluster for queries. Possible values are the following:
Available - The cluster is available for queries.Unavailable - The cluster is not available for queries.Maintenance - The cluster is intermittently available for queries due to maintenance activities.Modifying -The cluster is intermittently available for queries due to changes that modify the cluster.Failed - The cluster failed and is not available for queries.ClusterCreateTime (string) --
Indicates when the cluster was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ClusterIdentifier (string) --
The unique identifier of the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
A node in an Amazon Redshift cluster.
NodeRole (string) --
The role of the node. A node might be a leader node or a compute node.
PrivateIpAddress (string) --
The private IP address of the node.
PublicIpAddress (string) --
The public IP address of the node.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster.
(dict) --
A cluster parameter group that is associated with an Amazon Redshift cluster.
ClusterParameterStatusList (list) --
The list of parameter statuses.
(dict) --
The status of a parameter in a cluster parameter group for an Amazon Redshift cluster.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter. Indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when it was applied.
Valid values: in-sync | pending-reboot | applying | invalid-parameter | apply-deferred | apply-error | unknown-error
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ParameterApplyStatus (string) --
The status of updates to the parameters.
ParameterGroupName (string) --
The name of the parameter group.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
ClusterSecurityGroups (list) --
A list of cluster security groups that are associated with the cluster.
(dict) --
A security group that is associated with the cluster.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
ClusterSnapshotCopyStatus (dict) --
Information about the destination Region and retention period for the cross-Region snapshot copy.
DestinationRegion (string) --
The destination Region that snapshots are automatically copied to when cross-Region snapshot copy is enabled.
ManualSnapshotRetentionPeriod (integer) --
The number of days that manual snapshots are retained in the destination region after they are copied from a source region.
If the value is -1 , then the manual snapshot is retained indefinitely.
Valid values: Either -1 or an integer between 1 and 3,653
RetentionPeriod (integer) --
The number of days to retain automated snapshots in the destination Region after they are copied from a source Region.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterStatus (string) --
The current status of the cluster.
Valid values: available | available, prep-for-resize | available, resize-cleanup |cancelling-resize | creating | deleting | final-snapshot | hardware-failure | incompatible-hsm |incompatible-network | incompatible-parameters | incompatible-restore | modifying | paused | rebooting | renaming | resizing | rotating-keys | storage-full | updating-hsm
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that runs on the cluster.
DBName (string) --
The name of the initial database that was created when the cluster was created.
The same name is returned for the life of the cluster.
If an initial database is not specified, a database named devdev is created by default.
DeferredMaintenanceWindows (list) --
List of time windows during which maintenance was deferred.
(dict) --
A time windows during which maintenance was deferred for an Amazon Redshift cluster.
DeferMaintenanceEndTime (string) --
The end of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DeferMaintenanceIdentifier (string) --
The identifier of the maintenance window.
DeferMaintenanceStartTime (string) --
The start of the time window for which maintenance was deferred.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ElasticIpStatus (dict) --
Information about the status of the Elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP address for the cluster.
Status (string) --
The status of the elastic IP address.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can use the elastic resize method to resize the cluster to.
Encrypted (boolean) --
Indicates whether the data in the cluster is encrypted at rest.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the cluster.
Port (integer) --
The port that the database engine listens on.
EnhancedVpcRouting (boolean) --
Indicates whether to create the cluster with enhanced VPC routing enabled.
ExpectedNextSnapshotScheduleTime (string) --
Indicates when the next snapshot is expected to be taken. The cluster must have a valid snapshot schedule and have backups enabled.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ExpectedNextSnapshotScheduleTimeStatus (string) --
The status of the next expected snapshot.
Valid values: OnTrack | Pending
HsmStatus (dict) --
Information about whether the Amazon Redshift cluster finished applying any changes to hardware security module (HSM) settings that were specified in a modify cluster command.
HsmClientCertificateIdentifier (string) --
The name of the HSM client certificate that the Amazon Redshift cluster uses to retrieve the data encryption keys that are stored in an HSM.
HsmConfigurationIdentifier (string) --
The name of the HSM configuration that contains the information that the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Indicates whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Type: String
Valid values: active | applying
IamRoles (list) --
A list of IAM roles that the cluster can use to access other Amazon Web Services services.
(dict) --
An IAM role that the cluster can use to access other Amazon Web Services services.
ApplyStatus (string) --
The status of the IAM role's association with the cluster.
Valid values: in-sync | adding | removing
IamRoleArn (string) --
The ARN of the IAM role.
KmsKeyId (string) --
The identifier of the KMS encryption key that is used to encrypt data in the cluster.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot.
If the value is -1 , the snapshot is retained indefinitely.
This setting doesn't change the retention period of existing snapshots.
Valid values: Either -1 or an integer between 1 and 3,653
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in as the value of DBName .
NextMaintenanceWindowStartTime (string) --
Indicates the start of the next maintenance window.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
NodeType (string) --
The node type for the nodes in the cluster.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PendingActions (list) --
A list of cluster operations that are waiting to start.
PendingModifiedValues (dict) --
A list of changes to the cluster that are currently pending.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change to the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change to the identifier for the cluster.
ClusterType (string) --
The pending or in-progress change to the cluster type.
ClusterVersion (string) --
The pending or in-progress change to the service version.
EncryptionType (string) --
The encryption type for a cluster.
EnhancedVpcRouting (boolean) --
Indicates whether to create the cluster with enhanced VPC routing enabled.
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster changes to during the next maintenance window.
MasterUserPassword (string) --
The pending or in-progress change to the master user password for the cluster.
NodeType (string) --
The pending or in-progress change to the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change to the number of nodes in the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change to whether the cluster can be connected to from the public network.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
Format: `` <day> :HH:MM-<day> :HH:MM``
For the day values, use mon | tue | wed | thu | fri | sat | sun
For example, sun:09:32-sun:10:02
PubliclyAccessible (boolean) --
Whether the cluster can be accessed from a public network.
ResizeInfo (dict) --
Information about the resize operation for the cluster.
AllowCancelResize (boolean) --
Indicates whether the resize operation can be canceled.
ResizeType (string) --
The type of resize operation.
Valid values: ClassicResize
RestoreStatus (dict) --
Information about the status of a cluster restore action. Only applies to a cluster that was created by restoring a snapshot.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
This field is only updated when you restore to DC2 and DS2 node types.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
This field is only updated when you restore to DC2 and DS2 node types.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore is complete. Returns 0 for a completed restore.
This field is only updated when you restore to DC2 and DS2 node types.
ProgressInMegaBytes (integer) --
The number of megabytes that were transferred from snapshot storage.
This field is only updated when you restore to DC2 and DS2 node types.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data that was used to restore the cluster.
This field is only updated when you restore to DC2 and DS2 node types.
Status (string) --
The status of the restore action.
Valid values: starting | restoring | completed | failed
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
Valid values: MODIFYING | ACTIVE | FAILED
VpcId (string) --
The identifier of the VPC that the cluster is in, if the cluster is in a VPC.
VpcSecurityGroups (list) --
The list of VPC security groups that the cluster belongs to, if the cluster is in a VPC.
(dict) --
A VPC security group that the cluster belongs to, if the cluster is in a VPC.
Status (string) --
The status of the VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
LoggingStatus (dict) --
Information about the logging status of the cluster.
BucketName (string) --
The name of the S3 bucket where the log files are stored.
LastFailureMessage (string) --
The message indicating that the logs failed to be delivered.
LastFailureTime (string) --
The last time when logs failed to be delivered.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LastSuccessfulDeliveryTime (string) --
The last time that logs were delivered successfully.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
LoggingEnabled (boolean) --
Indicates whether logging is enabled.
S3KeyPrefix (string) --
Provides the prefix applied to the log file names.
AwsElbLoadBalancer (dict) --
Contains details about a Classic Load Balancer.
AvailabilityZones (list) --
The list of Availability Zones for the load balancer.
BackendServerDescriptions (list) --
Information about the configuration of the EC2 instances.
(dict) --
Provides information about the configuration of an EC2 instance for the load balancer.
InstancePort (integer) --
The port on which the EC2 instance is listening.
PolicyNames (list) --
The names of the policies that are enabled for the EC2 instance.
CanonicalHostedZoneName (string) --
The name of the Amazon Route 53 hosted zone for the load balancer.
CanonicalHostedZoneNameID (string) --
The ID of the Amazon Route 53 hosted zone for the load balancer.
CreatedTime (string) --
Indicates when the load balancer was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
DnsName (string) --
The DNS name of the load balancer.
HealthCheck (dict) --
Information about the health checks that are conducted on the load balancer.
HealthyThreshold (integer) --
The number of consecutive health check successes required before the instance is moved to the Healthy state.
Interval (integer) --
The approximate interval, in seconds, between health checks of an individual instance.
Target (string) --
The instance that is being checked. The target specifies the protocol and port. The available protocols are TCP, SSL, HTTP, and HTTPS. The range of valid ports is 1 through 65535.
For the HTTP and HTTPS protocols, the target also specifies the ping path.
For the TCP protocol, the target is specified as ``TCP: <port> `` .
For the SSL protocol, the target is specified as ``SSL.*<port>* `` .
For the HTTP and HTTPS protocols, the target is specified as `` <protocol> :<port> /<path to ping> `` .
Timeout (integer) --
The amount of time, in seconds, during which no response means a failed health check.
UnhealthyThreshold (integer) --
The number of consecutive health check failures that must occur before the instance is moved to the Unhealthy state.
Instances (list) --
List of EC2 instances for the load balancer.
(dict) --
Provides information about an EC2 instance for a load balancer.
InstanceId (string) --
The instance identifier.
ListenerDescriptions (list) --
The policies that are enabled for the load balancer listeners.
(dict) --
Lists the policies that are enabled for a load balancer listener.
Listener (dict) --
Information about the listener.
InstancePort (integer) --
The port on which the instance is listening.
InstanceProtocol (string) --
The protocol to use to route traffic to instances.
Valid values: HTTP | HTTPS | TCP | SSL
LoadBalancerPort (integer) --
The port on which the load balancer is listening.
On EC2-VPC, you can specify any port from the range 1-65535.
On EC2-Classic, you can specify any port from the following list: 25, 80, 443, 465, 587, 1024-65535.
Protocol (string) --
The load balancer transport protocol to use for routing.
Valid values: HTTP | HTTPS | TCP | SSL
SslCertificateId (string) --
The ARN of the server certificate.
PolicyNames (list) --
The policies enabled for the listener.
LoadBalancerAttributes (dict) --
The attributes for a load balancer.
AccessLog (dict) --
Information about the access log configuration for the load balancer.
If the access log is enabled, the load balancer captures detailed information about all requests. It delivers the information to a specified S3 bucket.
EmitInterval (integer) --
The interval in minutes for publishing the access logs.
You can publish access logs either every 5 minutes or every 60 minutes.
Enabled (boolean) --
Indicates whether access logs are enabled for the load balancer.
S3BucketName (string) --
The name of the S3 bucket where the access logs are stored.
S3BucketPrefix (string) --
The logical hierarchy that was created for the S3 bucket.
If a prefix is not provided, the log is placed at the root level of the bucket.
ConnectionDraining (dict) --
Information about the connection draining configuration for the load balancer.
If connection draining is enabled, the load balancer allows existing requests to complete before it shifts traffic away from a deregistered or unhealthy instance.
Enabled (boolean) --
Indicates whether connection draining is enabled for the load balancer.
Timeout (integer) --
The maximum time, in seconds, to keep the existing connections open before deregistering the instances.
ConnectionSettings (dict) --
Connection settings for the load balancer.
If an idle timeout is configured, the load balancer allows connections to remain idle for the specified duration. When a connection is idle, no data is sent over the connection.
IdleTimeout (integer) --
The time, in seconds, that the connection can be idle (no data is sent over the connection) before it is closed by the load balancer.
CrossZoneLoadBalancing (dict) --
Cross-zone load balancing settings for the load balancer.
If cross-zone load balancing is enabled, the load balancer routes the request traffic evenly across all instances regardless of the Availability Zones.
Enabled (boolean) --
Indicates whether cross-zone load balancing is enabled for the load balancer.
AdditionalAttributes (list) --
Any additional attributes for a load balancer.
(dict) --
Provides information about additional attributes for the load balancer.
Key (string) --
The name of the attribute.
Value (string) --
The value of the attribute.
LoadBalancerName (string) --
The name of the load balancer.
Policies (dict) --
The policies for a load balancer.
AppCookieStickinessPolicies (list) --
The stickiness policies that are created using CreateAppCookieStickinessPolicy .
(dict) --
Contains information about a stickiness policy that was created using CreateAppCookieStickinessPolicy .
CookieName (string) --
The name of the application cookie used for stickiness.
PolicyName (string) --
The mnemonic name for the policy being created. The name must be unique within the set of policies for the load balancer.
LbCookieStickinessPolicies (list) --
The stickiness policies that are created using CreateLBCookieStickinessPolicy .
(dict) --
Contains information about a stickiness policy that was created using CreateLBCookieStickinessPolicy .
CookieExpirationPeriod (integer) --
The amount of time, in seconds, after which the cookie is considered stale. If an expiration period is not specified, the stickiness session lasts for the duration of the browser session.
PolicyName (string) --
The name of the policy. The name must be unique within the set of policies for the load balancer.
OtherPolicies (list) --
The policies other than the stickiness policies.
Scheme (string) --
The type of load balancer. Only provided if the load balancer is in a VPC.
If Scheme is internet-facing , the load balancer has a public DNS name that resolves to a public IP address.
If Scheme is internal , the load balancer has a public DNS name that resolves to a private IP address.
SecurityGroups (list) --
The security groups for the load balancer. Only provided if the load balancer is in a VPC.
SourceSecurityGroup (dict) --
Information about the security group for the load balancer. This is the security group that is used for inbound rules.
GroupName (string) --
The name of the security group.
OwnerAlias (string) --
The owner of the security group.
Subnets (list) --
The list of subnet identifiers for the load balancer.
VpcId (string) --
The identifier of the VPC for the load balancer.
AwsIamGroup (dict) --
Contains details about an IAM group.
AttachedManagedPolicies (list) --
A list of the managed policies that are attached to the IAM group.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the IAM group was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
GroupId (string) --
The identifier of the IAM group.
GroupName (string) --
The name of the IAM group.
GroupPolicyList (list) --
The list of inline policies that are embedded in the group.
(dict) --
A managed policy that is attached to the IAM group.
PolicyName (string) --
The name of the policy.
Path (string) --
The path to the group.
AwsIamRole (dict) --
Details about an IAM role.
AssumeRolePolicyDocument (string) --
The trust policy that grants permission to assume the role.
AttachedManagedPolicies (list) --
The list of the managed policies that are attached to the role.
(dict) --
A managed policy that is attached to an IAM principal.
PolicyName (string) --
The name of the policy.
PolicyArn (string) --
The ARN of the policy.
CreateDate (string) --
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InstanceProfileList (list) --
The list of instance profiles that contain this role.
(dict) --
Information about an instance profile.
Arn (string) --
The ARN of the instance profile.
CreateDate (string) --
Indicates when the instance profile was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
InstanceProfileId (string) --
The identifier of the instance profile.
InstanceProfileName (string) --
The name of the instance profile.
Path (string) --
The path to the instance profile.
Roles (list) --
The roles associated with the instance profile.
(dict) --
Information about a role associated with an instance profile.
Arn (string) --
The ARN of the role.
AssumeRolePolicyDocument (string) --
The policy that grants an entity permission to assume the role.
CreateDate (string) --
Indicates when the role was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Path (string) --
The path to the role.
RoleId (string) --
The identifier of the role.
RoleName (string) --
The name of the role.
PermissionsBoundary (dict) --
Information about the policy used to set the permissions boundary for an IAM principal.
PermissionsBoundaryArn (string) --
The ARN of the policy used to set the permissions boundary.
PermissionsBoundaryType (string) --
The usage type for the permissions boundary.
RoleId (string) --
The stable and unique string identifying the role.
RoleName (string) --
The friendly name that identifies the role.
RolePolicyList (list) --
The list of inline policies that are embedded in the role.
(dict) --
An inline policy that is embedded in the role.
PolicyName (string) --
The name of the policy.
MaxSessionDuration (integer) --
The maximum session duration (in seconds) that you want to set for the specified role.
Path (string) --
The path to the role.
AwsKmsKey (dict) --
Details about an KMS key.
AWSAccountId (string) --
The twelve-digit account ID of the Amazon Web Services account that owns the KMS key.
CreationDate (float) --
Indicates when the KMS key was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
KeyId (string) --
The globally unique identifier for the KMS key.
KeyManager (string) --
The manager of the KMS key. KMS keys in your Amazon Web Services account are either customer managed or Amazon Web Services managed.
KeyState (string) --
The state of the KMS key.
Origin (string) --
The source of the KMS key material.
When this value is AWS_KMS , KMS created the key material.
When this value is EXTERNAL , the key material was imported from your existing key management infrastructure or the KMS key lacks key material.
When this value is AWS_CLOUDHSM , the key material was created in the CloudHSM cluster associated with a custom key store.
Description (string) --
A description of the KMS key.
KeyRotationStatus (boolean) --
Whether the key has key rotation enabled.
AwsLambdaFunction (dict) --
Details about a Lambda function.
Code (dict) --
An AwsLambdaFunctionCode object.
S3Bucket (string) --
An Amazon S3 bucket in the same Amazon Web Services Region as your function. The bucket can be in a different Amazon Web Services account.
S3Key (string) --
The Amazon S3 key of the deployment package.
S3ObjectVersion (string) --
For versioned objects, the version of the deployment package object to use.
ZipFile (string) --
The base64-encoded contents of the deployment package. Amazon Web Services SDK and Amazon Web Services CLI clients handle the encoding for you.
CodeSha256 (string) --
The SHA256 hash of the function's deployment package.
DeadLetterConfig (dict) --
The function's dead letter queue.
TargetArn (string) --
The ARN of an SQS queue or SNS topic.
Environment (dict) --
The function's environment variables.
Variables (dict) --
Environment variable key-value pairs.
Error (dict) --
An AwsLambdaFunctionEnvironmentError object.
ErrorCode (string) --
The error code.
Message (string) --
The error message.
FunctionName (string) --
The name of the function.
Handler (string) --
The function that Lambda calls to begin executing your function.
KmsKeyArn (string) --
The KMS key that is used to encrypt the function's environment variables. This key is only returned if you've configured a customer managed customer managed key.
LastModified (string) --
Indicates when the function was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Layers (list) --
The function's layers.
(dict) --
An Lambda layer.
Arn (string) --
The ARN of the function layer.
CodeSize (integer) --
The size of the layer archive in bytes.
MasterArn (string) --
For Lambda@Edge functions, the ARN of the master function.
MemorySize (integer) --
The memory that is allocated to the function.
RevisionId (string) --
The latest updated revision of the function or alias.
Role (string) --
The function's execution role.
Runtime (string) --
The runtime environment for the Lambda function.
Timeout (integer) --
The amount of time that Lambda allows a function to run before stopping it.
TracingConfig (dict) --
The function's X-Ray tracing configuration.
Mode (string) --
The tracing mode.
VpcConfig (dict) --
The function's networking configuration.
SecurityGroupIds (list) --
A list of VPC security groups IDs.
SubnetIds (list) --
A list of VPC subnet IDs.
VpcId (string) --
The ID of the VPC.
Version (string) --
The version of the Lambda function.
AwsLambdaLayerVersion (dict) --
Details for a Lambda layer version.
Version (integer) --
The version number.
CompatibleRuntimes (list) --
The layer's compatible runtimes. Maximum number of five items.
Valid values: nodejs10.x | nodejs12.x | java8 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | dotnetcore1.0 | dotnetcore2.1 | go1.x | ruby2.5 | provided
CreatedDate (string) --
Indicates when the version was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsRdsDbInstance (dict) --
Details about an Amazon RDS database instance.
AssociatedRoles (list) --
The IAM roles associated with the DB instance.
(dict) --
An IAM role associated with the DB instance.
RoleArn (string) --
The ARN of the IAM role that is associated with the DB instance.
FeatureName (string) --
The name of the feature associated with the IAM role.
Status (string) --
Describes the state of the association between the IAM role and the DB instance. The Status property returns one of the following values:
ACTIVE - The IAM role ARN is associated with the DB instance and can be used to access other Amazon Web Services services on your behalf.PENDING - The IAM role ARN is being associated with the DB instance.INVALID - The IAM role ARN is associated with the DB instance. But the DB instance is unable to assume the IAM role in order to access other Amazon Web Services services on your behalf.CACertificateIdentifier (string) --
The identifier of the CA certificate for this DB instance.
DBClusterIdentifier (string) --
If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
DBInstanceIdentifier (string) --
Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
DBInstanceClass (string) --
Contains the name of the compute and memory capacity class of the DB instance.
DbInstancePort (integer) --
Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
DbiResourceId (string) --
The Amazon Web Services Region-unique, immutable identifier for the DB instance. This identifier is found in CloudTrail log entries whenever the KMS key for the DB instance is accessed.
DBName (string) --
The meaning of this parameter differs according to the database engine you use.
MySQL, MariaDB, SQL Server, PostgreSQL
Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
Oracle
Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
DeletionProtection (boolean) --
Indicates whether the DB instance has deletion protection enabled.
When deletion protection is enabled, the database cannot be deleted.
Endpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
Engine (string) --
Provides the name of the database engine to use for this DB instance.
EngineVersion (string) --
Indicates the database engine version.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of IAM accounts to database accounts is enabled, and otherwise false.
IAM database authentication can be enabled for the following database engines.
InstanceCreateTime (string) --
Indicates when the DB instance was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
KmsKeyId (string) --
If StorageEncrypted is true, the KMS key identifier for the encrypted DB instance.
PubliclyAccessible (boolean) --
Specifies the accessibility options for the DB instance.
A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address.
A value of false specifies an internal instance with a DNS name that resolves to a private IP address.
StorageEncrypted (boolean) --
Specifies whether the DB instance is encrypted.
TdeCredentialArn (string) --
The ARN from the key store with which the instance is associated for TDE encryption.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB instance belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
MultiAz (boolean) --
Whether the DB instance is a multiple Availability Zone deployment.
EnhancedMonitoringResourceArn (string) --
The ARN of the CloudWatch Logs log stream that receives the enhanced monitoring metrics data for the DB instance.
DbInstanceStatus (string) --
The current status of the DB instance.
MasterUsername (string) --
The master user name of the DB instance.
AllocatedStorage (integer) --
The amount of storage (in gigabytes) to initially allocate for the DB instance.
PreferredBackupWindow (string) --
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
BackupRetentionPeriod (integer) --
The number of days for which to retain automated backups.
DbSecurityGroups (list) --
A list of the DB security groups to assign to the DB instance.
DbParameterGroups (list) --
A list of the DB parameter groups to assign to the DB instance.
(dict) --
Provides information about a parameter group for a DB instance.
DbParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
AvailabilityZone (string) --
The Availability Zone where the DB instance will be created.
DbSubnetGroup (dict) --
Information about the subnet group that is associated with the DB instance.
DbSubnetGroupName (string) --
The name of the subnet group.
DbSubnetGroupDescription (string) --
The description of the subnet group.
VpcId (string) --
The VPC ID of the subnet group.
SubnetGroupStatus (string) --
The status of the subnet group.
Subnets (list) --
A list of subnets in the subnet group.
(dict) --
Information about a subnet in a subnet group.
SubnetIdentifier (string) --
The identifier of a subnet in the subnet group.
SubnetAvailabilityZone (dict) --
Information about the Availability Zone for a subnet in the subnet group.
Name (string) --
The name of the Availability Zone for a subnet in the subnet group.
SubnetStatus (string) --
The status of a subnet in the subnet group.
DbSubnetGroupArn (string) --
The ARN of the subnet group.
PreferredMaintenanceWindow (string) --
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
PendingModifiedValues (dict) --
Changes to the DB instance that are currently pending.
DbInstanceClass (string) --
The new DB instance class for the DB instance.
AllocatedStorage (integer) --
The new value of the allocated storage for the DB instance.
MasterUserPassword (string) --
The new master user password for the DB instance.
Port (integer) --
The new port for the DB instance.
BackupRetentionPeriod (integer) --
The new backup retention period for the DB instance.
MultiAZ (boolean) --
Indicates that a single Availability Zone DB instance is changing to a multiple Availability Zone deployment.
EngineVersion (string) --
The new engine version for the DB instance.
LicenseModel (string) --
The new license model value for the DB instance.
Iops (integer) --
The new provisioned IOPS value for the DB instance.
DbInstanceIdentifier (string) --
The new DB instance identifier for the DB instance.
StorageType (string) --
The new storage type for the DB instance.
CaCertificateIdentifier (string) --
The new CA certificate identifier for the DB instance.
DbSubnetGroupName (string) --
The name of the new subnet group for the DB instance.
PendingCloudWatchLogsExports (dict) --
A list of log types that are being enabled or disabled.
LogTypesToEnable (list) --
A list of log types that are being enabled.
LogTypesToDisable (list) --
A list of log types that are being disabled.
ProcessorFeatures (list) --
Processor features that are being updated.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
LatestRestorableTime (string) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AutoMinorVersionUpgrade (boolean) --
Indicates whether minor version patches are applied automatically.
ReadReplicaSourceDBInstanceIdentifier (string) --
If this DB instance is a read replica, contains the identifier of the source DB instance.
ReadReplicaDBInstanceIdentifiers (list) --
List of identifiers of the read replicas associated with this DB instance.
ReadReplicaDBClusterIdentifiers (list) --
List of identifiers of Aurora DB clusters to which the RDS DB instance is replicated as a read replica.
LicenseModel (string) --
License model information for this DB instance.
Iops (integer) --
Specifies the provisioned IOPS (I/O operations per second) for this DB instance.
OptionGroupMemberships (list) --
The list of option group memberships for this DB instance.
(dict) --
An option group membership.
OptionGroupName (string) --
The name of the option group.
Status (string) --
The status of the option group membership.
CharacterSetName (string) --
The name of the character set that this DB instance is associated with.
SecondaryAvailabilityZone (string) --
For a DB instance with multi-Availability Zone support, the name of the secondary Availability Zone.
StatusInfos (list) --
The status of a read replica. If the instance isn't a read replica, this is empty.
(dict) --
Information about the status of a read replica.
StatusType (string) --
The type of status. For a read replica, the status type is read replication.
Normal (boolean) --
Whether the read replica instance is operating normally.
Status (string) --
The status of the read replica instance.
Message (string) --
If the read replica is currently in an error state, provides the error details.
StorageType (string) --
The storage type for the DB instance.
DomainMemberships (list) --
The Active Directory domain membership records associated with the DB instance.
(dict) --
Information about an Active Directory domain membership record associated with the DB instance.
Domain (string) --
The identifier of the Active Directory domain.
Status (string) --
The status of the Active Directory Domain membership for the DB instance.
Fqdn (string) --
The fully qualified domain name of the Active Directory domain.
IamRoleName (string) --
The name of the IAM role to use when making API calls to the Directory Service.
CopyTagsToSnapshot (boolean) --
Whether to copy resource tags to snapshots of the DB instance.
MonitoringInterval (integer) --
The interval, in seconds, between points when enhanced monitoring metrics are collected for the DB instance.
MonitoringRoleArn (string) --
The ARN for the IAM role that permits Amazon RDS to send enhanced monitoring metrics to CloudWatch Logs.
PromotionTier (integer) --
The order in which to promote an Aurora replica to the primary instance after a failure of the existing primary instance.
Timezone (string) --
The time zone of the DB instance.
PerformanceInsightsEnabled (boolean) --
Indicates whether Performance Insights is enabled for the DB instance.
PerformanceInsightsKmsKeyId (string) --
The identifier of the KMS key used to encrypt the Performance Insights data.
PerformanceInsightsRetentionPeriod (integer) --
The number of days to retain Performance Insights data.
EnabledCloudWatchLogsExports (list) --
A list of log types that this DB instance is configured to export to CloudWatch Logs.
ProcessorFeatures (list) --
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
ListenerEndpoint (dict) --
Specifies the connection endpoint.
Address (string) --
Specifies the DNS address of the DB instance.
Port (integer) --
Specifies the port that the database engine is listening on.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
MaxAllocatedStorage (integer) --
The upper limit to which Amazon RDS can automatically scale the storage of the DB instance.
AwsSnsTopic (dict) --
Details about an SNS topic.
KmsMasterKeyId (string) --
The ID of an Amazon Web Services managed key for Amazon SNS or a customer managed key.
Subscription (list) --
Subscription is an embedded property that describes the subscription endpoints of an Amazon SNS topic.
(dict) --
A wrapper type for the attributes of an Amazon SNS subscription.
Endpoint (string) --
The subscription's endpoint (format depends on the protocol).
Protocol (string) --
The subscription's protocol.
TopicName (string) --
The name of the Amazon SNS topic.
Owner (string) --
The subscription's owner.
SqsSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
SqsFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon SQS endpoint.
ApplicationSuccessFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to a platform application endpoint.
FirehoseSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
FirehoseFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
HttpSuccessFeedbackRoleArn (string) --
Indicates successful message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
HttpFailureFeedbackRoleArn (string) --
Indicates failed message delivery status for an Amazon SNS topic that is subscribed to an HTTP endpoint.
AwsSqsQueue (dict) --
Details about an SQS queue.
KmsDataKeyReusePeriodSeconds (integer) --
The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again.
KmsMasterKeyId (string) --
The ID of an Amazon Web Services managed key for Amazon SQS or a custom KMS key.
QueueName (string) --
The name of the new queue.
DeadLetterTargetArn (string) --
The ARN of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
AwsWafWebAcl (dict) --
Details for an WAF web ACL.
Name (string) --
A friendly name or description of the web ACL. You can't change the name of a web ACL after you create it.
DefaultAction (string) --
The action to perform if none of the rules contained in the web ACL match.
Rules (list) --
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
(dict) --
Details for a rule in an WAF web ACL.
Action (dict) --
Specifies the action that CloudFront or WAF takes when a web request matches the conditions in the rule.
Type (string) --
Specifies how you want WAF to respond to requests that match the settings in a rule.
Valid settings include the following:
ALLOW - WAF allows requestsBLOCK - WAF blocks requestsCOUNT - WAF increments a counter of the requests that match all of the conditions in the rule. WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify COUNT for the default action for a web ACL.ExcludedRules (list) --
Rules to exclude from a rule group.
(dict) --
Details about a rule to exclude from a rule group.
RuleId (string) --
The unique identifier for the rule to exclude from the rule group.
OverrideAction (dict) --
Use the OverrideAction to test your RuleGroup .
Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup blocks a request if any individual rule in the RuleGroup matches the request and is configured to block that request.
However, if you first want to test the RuleGroup , set the OverrideAction to Count . The RuleGroup then overrides any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests are counted.
ActivatedRule|OverrideActionapplies only when updating or adding aRuleGroupto a web ACL. In this case you do not useActivatedRuleAction. For all other update requests,ActivatedRuleActionis used instead ofActivatedRuleOverrideAction.
Type (string) --
COUNToverrides the action specified by the individual rule within aRuleGroup.
If set to NONE , the rule's action takes place.
Priority (integer) --
Specifies the order in which the rules in a web ACL are evaluated. Rules with a lower value for Priority are evaluated before rules with a higher value. The value must be a unique integer. If you add multiple rules to a web ACL, the values do not need to be consecutive.
RuleId (string) --
The identifier for a rule.
Type (string) --
The rule type.
Valid values: REGULAR | RATE_BASED | GROUP
The default is REGULAR .
WebAclId (string) --
A unique identifier for a web ACL.
AwsRdsDbSnapshot (dict) --
Details about an Amazon RDS database snapshot.
DbSnapshotIdentifier (string) --
The name or ARN of the DB snapshot that is used to restore the DB instance.
DbInstanceIdentifier (string) --
A name for the DB instance.
SnapshotCreateTime (string) --
When the snapshot was taken in Coordinated Universal Time (UTC).
Engine (string) --
The name of the database engine to use for this DB instance.
AllocatedStorage (integer) --
The amount of storage (in gigabytes) to be initially allocated for the database instance.
Status (string) --
The status of this DB snapshot.
Port (integer) --
The port that the database engine was listening on at the time of the snapshot.
AvailabilityZone (string) --
Specifies the name of the Availability Zone in which the DB instance was located at the time of the DB snapshot.
VpcId (string) --
The VPC ID associated with the DB snapshot.
InstanceCreateTime (string) --
Specifies the time in Coordinated Universal Time (UTC) when the DB instance, from which the snapshot was taken, was created.
MasterUsername (string) --
The master user name for the DB snapshot.
EngineVersion (string) --
The version of the database engine.
LicenseModel (string) --
License model information for the restored DB instance.
SnapshotType (string) --
The type of the DB snapshot.
Iops (integer) --
The provisioned IOPS (I/O operations per second) value of the DB instance at the time of the snapshot.
OptionGroupName (string) --
The option group name for the DB snapshot.
PercentProgress (integer) --
The percentage of the estimated data that has been transferred.
SourceRegion (string) --
The Amazon Web Services Region that the DB snapshot was created in or copied from.
SourceDbSnapshotIdentifier (string) --
The DB snapshot ARN that the DB snapshot was copied from.
StorageType (string) --
The storage type associated with the DB snapshot.
TdeCredentialArn (string) --
The ARN from the key store with which to associate the instance for TDE encryption.
Encrypted (boolean) --
Whether the DB snapshot is encrypted.
KmsKeyId (string) --
If Encrypted is true , the KMS key identifier for the encrypted DB snapshot.
Timezone (string) --
The time zone of the DB snapshot.
IamDatabaseAuthenticationEnabled (boolean) --
Whether mapping of IAM accounts to database accounts is enabled.
ProcessorFeatures (list) --
The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
(dict) --
A processor feature.
Name (string) --
The name of the processor feature.
Value (string) --
The value of the processor feature.
DbiResourceId (string) --
The identifier for the source DB instance.
AwsRdsDbClusterSnapshot (dict) --
Details about an Amazon RDS database cluster snapshot.
AvailabilityZones (list) --
A list of Availability Zones where instances in the DB cluster can be created.
SnapshotCreateTime (string) --
Indicates when the snapshot was taken.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Engine (string) --
The name of the database engine that you want to use for this DB instance.
AllocatedStorage (integer) --
Specifies the allocated storage size in gibibytes (GiB).
Status (string) --
The status of this DB cluster snapshot.
Port (integer) --
The port number on which the DB instances in the DB cluster accept connections.
VpcId (string) --
The VPC ID that is associated with the DB cluster snapshot.
ClusterCreateTime (string) --
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
MasterUsername (string) --
The name of the master user for the DB cluster.
EngineVersion (string) --
The version of the database engine to use.
LicenseModel (string) --
The license model information for this DB cluster snapshot.
SnapshotType (string) --
The type of DB cluster snapshot.
PercentProgress (integer) --
Specifies the percentage of the estimated data that has been transferred.
StorageEncrypted (boolean) --
Whether the DB cluster is encrypted.
KmsKeyId (string) --
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
DbClusterIdentifier (string) --
The DB cluster identifier.
DbClusterSnapshotIdentifier (string) --
The identifier of the DB cluster snapshot.
IamDatabaseAuthenticationEnabled (boolean) --
Whether mapping of IAM accounts to database accounts is enabled.
AwsRdsDbCluster (dict) --
Details about an Amazon RDS database cluster.
AllocatedStorage (integer) --
For all database engines except Aurora, specifies the allocated storage size in gibibytes (GiB).
AvailabilityZones (list) --
A list of Availability Zones (AZs) where instances in the DB cluster can be created.
BackupRetentionPeriod (integer) --
The number of days for which automated backups are retained.
DatabaseName (string) --
The name of the database.
Status (string) --
The current status of this DB cluster.
Endpoint (string) --
The connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster.
CustomEndpoints (list) --
A list of custom endpoints for the DB cluster.
MultiAz (boolean) --
Whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
The name of the database engine to use for this DB cluster.
EngineVersion (string) --
The version number of the database engine to use.
Port (integer) --
The port number on which the DB instances in the DB cluster accept connections.
MasterUsername (string) --
The name of the master user for the DB cluster.
PreferredBackupWindow (string) --
The range of time each day when automated backups are created, if automated backups are enabled.
Uses the format HH:MM-HH:MM . For example, 04:52-05:22 .
PreferredMaintenanceWindow (string) --
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Uses the format <day>:HH:MM-<day>:HH:MM .
For the day values, use mon |tue |wed |thu |fri |sat |sun .
For example, sun:09:32-sun:10:02 .
ReadReplicaIdentifiers (list) --
The identifiers of the read replicas that are associated with this DB cluster.
VpcSecurityGroups (list) --
A list of VPC security groups that the DB cluster belongs to.
(dict) --
A VPC security groups that the DB instance belongs to.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the identifier that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Whether the DB cluster is encrypted.
KmsKeyId (string) --
The ARN of the KMS master key that is used to encrypt the database instances in the DB cluster.
DbClusterResourceId (string) --
The identifier of the DB cluster. The identifier must be unique within each Amazon Web Services Region and is immutable.
AssociatedRoles (list) --
A list of the IAM roles that are associated with the DB cluster.
(dict) --
An IAM role that is associated with the Amazon RDS DB cluster.
RoleArn (string) --
The ARN of the IAM role.
Status (string) --
The status of the association between the IAM role and the DB cluster.
ClusterCreateTime (string) --
Indicates when the DB cluster was created, in Universal Coordinated Time (UTC).
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
EnabledCloudWatchLogsExports (list) --
A list of log types that this DB cluster is configured to export to CloudWatch Logs.
EngineMode (string) --
The database engine mode of the DB cluster.
DeletionProtection (boolean) --
Whether the DB cluster has deletion protection enabled.
HttpEndpointEnabled (boolean) --
Whether the HTTP endpoint for an Aurora Serverless DB cluster is enabled.
ActivityStreamStatus (string) --
The status of the database activity stream.
CopyTagsToSnapshot (boolean) --
Whether tags are copied from the DB cluster to snapshots of the DB cluster.
CrossAccountClone (boolean) --
Whether the DB cluster is a clone of a DB cluster owned by a different Amazon Web Services account.
DomainMemberships (list) --
The Active Directory domain membership records that are associated with the DB cluster.
(dict) --
Information about an Active Directory domain membership record associated with the DB instance.
Domain (string) --
The identifier of the Active Directory domain.
Status (string) --
The status of the Active Directory Domain membership for the DB instance.
Fqdn (string) --
The fully qualified domain name of the Active Directory domain.
IamRoleName (string) --
The name of the IAM role to use when making API calls to the Directory Service.
DbClusterParameterGroup (string) --
The name of the DB cluster parameter group for the DB cluster.
DbSubnetGroup (string) --
The subnet group that is associated with the DB cluster, including the name, description, and subnets in the subnet group.
DbClusterOptionGroupMemberships (list) --
The list of option group memberships for this DB cluster.
(dict) --
Information about an option group membership for a DB cluster.
DbClusterOptionGroupName (string) --
The name of the DB cluster option group.
Status (string) --
The status of the DB cluster option group.
DbClusterIdentifier (string) --
The DB cluster identifier that the user assigned to the cluster. This identifier is the unique key that identifies a DB cluster.
DbClusterMembers (list) --
The list of instances that make up the DB cluster.
(dict) --
Information about an instance in the DB cluster.
IsClusterWriter (boolean) --
Whether the cluster member is the primary instance for the DB cluster.
PromotionTier (integer) --
Specifies the order in which an Aurora replica is promoted to the primary instance when the existing primary instance fails.
DbInstanceIdentifier (string) --
The instance identifier for this member of the DB cluster.
DbClusterParameterGroupStatus (string) --
The status of the DB cluster parameter group for this member of the DB cluster.
IamDatabaseAuthenticationEnabled (boolean) --
Whether the mapping of IAM accounts to database accounts is enabled.
AwsEcsCluster (dict) --
Details about an Amazon ECS cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that identifies the cluster.
ActiveServicesCount (integer) --
The number of services that are running on the cluster in an ACTIVE state. You can view these services with the Amazon ECS ` ListServices https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html`__ API operation.
CapacityProviders (list) --
The short name of one or more capacity providers to associate with the cluster.
ClusterSettings (list) --
The setting to use to create the cluster. Specifically used to configure whether to enable CloudWatch Container Insights for the cluster.
(dict) --
Indicates whether to enable CloudWatch Container Insights for the ECS cluster.
Name (string) --
The name of the setting.
Value (string) --
The value of the setting.
Configuration (dict) --
The run command configuration for the cluster.
ExecuteCommandConfiguration (dict) --
Contains the run command configuration for the cluster.
KmsKeyId (string) --
The identifier of the KMS key that is used to encrypt the data between the local client and the container.
LogConfiguration (dict) --
The log configuration for the results of the run command actions. Required if Logging is NONE .
CloudWatchEncryptionEnabled (boolean) --
Whether to enable encryption on the CloudWatch logs.
CloudWatchLogGroupName (string) --
The name of the CloudWatch log group to send the logs to.
S3BucketName (string) --
The name of the S3 bucket to send logs to.
S3EncryptionEnabled (boolean) --
Whether to encrypt the logs that are sent to the S3 bucket.
S3KeyPrefix (string) --
Identifies the folder in the S3 bucket to send the logs to.
Logging (string) --
The log setting to use for redirecting logs for run command results.
DefaultCapacityProviderStrategy (list) --
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
(dict) --
The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.
Base (integer) --
The minimum number of tasks to run on the specified capacity provider.
CapacityProvider (string) --
The name of the capacity provider.
Weight (integer) --
The relative percentage of the total number of tasks launched that should use the capacity provider.
ClusterName (string) --
A name that you use to identify your cluster.
RegisteredContainerInstancesCount (integer) --
The number of container instances registered into the cluster. This includes container instances in both ACTIVE and DRAINING status.
RunningTasksCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
Status (string) --
The status of the cluster.
AwsEcsContainer (dict) --
Provides information about a Docker container that's part of a task.
Name (string) --
The name of the container.
Image (string) --
The image used for the container.
MountPoints (list) --
The mount points for data volumes in your container.
(dict) --
Details for a volume mount point that's used in a container definition.
SourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
ContainerPath (string) --
The path on the container to mount the host volume at.
Privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
AwsEcsTaskDefinition (dict) --
Details about a task definition. A task definition describes the container and volume definitions of an Amazon Elastic Container Service task.
ContainerDefinitions (list) --
The container definitions that describe the containers that make up the task.
(dict) --
A container definition that describes a container in the task.
Command (list) --
The command that is passed to the container.
Cpu (integer) --
The number of CPU units reserved for the container.
DependsOn (list) --
The dependencies that are defined for container startup and shutdown.
(dict) --
A dependency that is defined for container startup and shutdown.
Condition (string) --
The dependency condition of the dependent container. Indicates the required status of the dependent container before the current container can start.
ContainerName (string) --
The name of the dependent container.
DisableNetworking (boolean) --
Whether to disable networking within the container.
DnsSearchDomains (list) --
A list of DNS search domains that are presented to the container.
DnsServers (list) --
A list of DNS servers that are presented to the container.
DockerLabels (dict) --
A key-value map of labels to add to the container.
DockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems.
EntryPoint (list) --
The entry point that is passed to the container.
Environment (list) --
The environment variables to pass to a container.
(dict) --
An environment variable to pass to the container.
Name (string) --
The name of the environment variable.
Value (string) --
The value of the environment variable.
EnvironmentFiles (list) --
A list of files containing the environment variables to pass to a container.
(dict) --
A file that contain environment variables to pass to a container.
Type (string) --
The type of environment file.
Value (string) --
The ARN of the S3 object that contains the environment variable file.
Essential (boolean) --
Whether the container is essential. All tasks must have at least one essential container.
ExtraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container.
(dict) --
A hostname and IP address mapping to append to the /etc/hosts file on the container.
Hostname (string) --
The hostname to use in the /etc/hosts entry.
IpAddress (string) --
The IP address to use in the /etc/hosts entry.
FirelensConfiguration (dict) --
The FireLens configuration for the container. Specifies and configures a log router for container logs.
Options (dict) --
The options to use to configure the log router.
The valid option keys are as follows:
enable-ecs-log-metadata . The value can be true or false .config-file-type . The value can be s3 or file .config-file-value . The value is either an S3 ARN or a file path.Type (string) --
The log router to use.
HealthCheck (dict) --
The container health check command and associated configuration parameters for the container.
Command (list) --
The command that the container runs to determine whether it is healthy.
Interval (integer) --
The time period in seconds between each health check execution. The default value is 30 seconds.
Retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. The default value is 3.
StartPeriod (integer) --
The optional grace period in seconds that allows containers time to bootstrap before failed health checks count towards the maximum number of retries.
Timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. The default value is 5.
Hostname (string) --
The hostname to use for the container.
Image (string) --
The image used to start the container.
Interactive (boolean) --
If set to true, then containerized applications can be deployed that require stdin or a tty to be allocated.
Links (list) --
A list of links for the container in the form `` container_name :alias `` . Allows containers to communicate with each other without the need for port mappings.
LinuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities.
Capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Add (list) --
The Linux capabilities for the container that are added to the default configuration provided by Docker.
Drop (list) --
The Linux capabilities for the container that are dropped from the default configuration provided by Docker.
Devices (list) --
The host devices to expose to the container.
(dict) --
A host device to expose to the container.
ContainerPath (string) --
The path inside the container at which to expose the host device.
HostPath (string) --
The path for the device on the host container instance.
Permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read, write, and mknod for the device.
InitProcessEnabled (boolean) --
Whether to run an init process inside the container that forwards signals and reaps processes.
MaxSwap (integer) --
The total amount of swap memory (in MiB) that a container can use.
SharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume.
Swappiness (integer) --
Configures the container's memory swappiness behavior. Determines how aggressively pages are swapped. The higher the value, the more aggressive the swappiness. The default is 60.
Tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount.
(dict) --
The container path, mount options, and size (in MiB) of a tmpfs mount.
ContainerPath (string) --
The absolute file path where the tmpfs volume is to be mounted.
MountOptions (list) --
The list of tmpfs volume mount options.
Size (integer) --
The maximum size (in MiB) of the tmpfs volume.
LogConfiguration (dict) --
The log configuration specification for the container.
LogDriver (string) --
The log driver to use for the container.
Options (dict) --
The configuration options to send to the log driver. Requires version 1.19 of the Docker Remote API or greater on your container instance.
SecretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
A secret to pass to the log configuration.
Name (string) --
The name of the secret.
ValueFrom (string) --
The secret to expose to the container.
The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
Memory (integer) --
The amount (in MiB) of memory to present to the container. If the container attempts to exceed the memory specified here, the container is shut down. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified.
MemoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container.
MountPoints (list) --
The mount points for the data volumes in the container.
(dict) --
A mount point for the data volumes in the container.
ContainerPath (string) --
The path on the container to mount the host volume at.
ReadOnly (boolean) --
Whether the container has read-only access to the volume.
SourceVolume (string) --
The name of the volume to mount. Must match the name of a volume listed in VolumeDetails for the task definition.
Name (string) --
The name of the container.
PortMappings (list) --
The list of port mappings for the container.
(dict) --
A port mapping for the container.
ContainerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
HostPort (integer) --
The port number on the container instance to reserve for the container.
Protocol (string) --
The protocol used for the port mapping. The default is tcp .
Privileged (boolean) --
Whether the container is given elevated privileges on the host container instance. The elevated privileges are similar to the root user.
PseudoTerminal (boolean) --
Whether to allocate a TTY to the container.
ReadonlyRootFilesystem (boolean) --
Whether the container is given read-only access to its root file system.
RepositoryCredentials (dict) --
The private repository authentication credentials to use.
CredentialsParameter (string) --
The ARN of the secret that contains the private repository credentials.
ResourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
A resource to assign to a container.
Type (string) --
The type of resource to assign to a container.
Value (string) --
The value for the specified resource type.
For GPU , the value is the number of physical GPUs the Amazon ECS container agent reserves for the container.
For InferenceAccelerator , the value should match the DeviceName attribute of an entry in InferenceAccelerators .
Secrets (list) --
The secrets to pass to the container.
(dict) --
A secret to pass to the container.
Name (string) --
The name of the secret.
ValueFrom (string) --
The secret to expose to the container. The value is either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the Systems Manager Parameter Store.
StartTimeout (integer) --
The number of seconds to wait before giving up on resolving dependencies for a container.
StopTimeout (integer) --
The number of seconds to wait before the container is stopped if it doesn't shut down normally on its own.
SystemControls (list) --
A list of namespaced kernel parameters to set in the container.
(dict) --
A namespaced kernel parameter to set in the container.
Namespace (string) --
The namespaced kernel parameter for which to set a value.
Value (string) --
The value of the parameter.
Ulimits (list) --
A list of ulimits to set in the container.
(dict) --
A ulimit to set in the container.
HardLimit (integer) --
The hard limit for the ulimit type.
Name (string) --
The type of the ulimit.
SoftLimit (integer) --
The soft limit for the ulimit type.
User (string) --
The user to use inside the container.
The value can use one of the following formats.
VolumesFrom (list) --
Data volumes to mount from another container.
(dict) --
A data volume to mount from another container.
ReadOnly (boolean) --
Whether the container has read-only access to the volume.
SourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
WorkingDirectory (string) --
The working directory in which to run commands inside the container.
Cpu (string) --
The number of CPU units used by the task.
ExecutionRoleArn (string) --
The ARN of the task execution role that grants the container agent permission to make API calls on behalf of the container user.
Family (string) --
The name of a family that this task definition is registered to.
InferenceAccelerators (list) --
The Elastic Inference accelerators to use for the containers in the task.
(dict) --
An Elastic Inference accelerator to use for the containers in the task.
DeviceName (string) --
The Elastic Inference accelerator device name.
DeviceType (string) --
The Elastic Inference accelerator type to use.
IpcMode (string) --
The IPC resource namespace to use for the containers in the task.
Memory (string) --
The amount (in MiB) of memory used by the task.
NetworkMode (string) --
The Docker networking mode to use for the containers in the task.
PidMode (string) --
The process namespace to use for the containers in the task.
PlacementConstraints (list) --
The placement constraint objects to use for tasks.
(dict) --
A placement constraint object to use for tasks.
Expression (string) --
A cluster query language expression to apply to the constraint.
Type (string) --
The type of constraint.
ProxyConfiguration (dict) --
The configuration details for the App Mesh proxy.
ContainerName (string) --
The name of the container that will serve as the App Mesh proxy.
ProxyConfigurationProperties (list) --
The set of network configuration parameters to provide to the Container Network Interface (CNI) plugin, specified as key-value pairs.
(dict) --
A network configuration parameter to provide to the Container Network Interface (CNI) plugin.
Name (string) --
The name of the property.
Value (string) --
The value of the property.
Type (string) --
The proxy type.
RequiresCompatibilities (list) --
The task launch types that the task definition was validated against.
TaskRoleArn (string) --
The short name or ARN of the IAM role that grants containers in the task permission to call Amazon Web Services API operations on your behalf.
Volumes (list) --
The data volume definitions for the task.
(dict) --
A data volume to mount from another container.
DockerVolumeConfiguration (dict) --
Information about a Docker volume.
Autoprovision (boolean) --
Whether to create the Docker volume automatically if it does not already exist.
Driver (string) --
The Docker volume driver to use.
DriverOpts (dict) --
A map of Docker driver-specific options that are passed through.
Labels (dict) --
Custom metadata to add to the Docker volume.
Scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are provisioned automatically when the task starts and destroyed when the task stops. Docker volumes that are shared persist after the task stops.
EfsVolumeConfiguration (dict) --
Information about the Amazon Elastic File System file system that is used for task storage.
AuthorizationConfig (dict) --
The authorization configuration details for the Amazon EFS file system.
AccessPointId (string) --
The Amazon EFS access point identifier to use.
Iam (string) --
Whether to use the Amazon ECS task IAM role defined in a task definition when mounting the Amazon EFS file system.
FilesystemId (string) --
The Amazon EFS file system identifier to use.
RootDirectory (string) --
The directory within the Amazon EFS file system to mount as the root directory inside the host.
TransitEncryption (string) --
Whether to enable encryption for Amazon EFS data in transit between the Amazon ECS host and the Amazon EFS server.
TransitEncryptionPort (integer) --
The port to use when sending encrypted data between the Amazon ECS host and the Amazon EFS server.
Host (dict) --
Information about a bind mount host volume.
SourcePath (string) --
The path on the host container instance that is presented to the container.
Name (string) --
The name of the data volume.
Container (dict) --
Details about a container resource related to a finding.
ContainerRuntime (string) --
The runtime of the container.
Name (string) --
The name of the container related to a finding.
ImageId (string) --
The identifier of the container image related to a finding.
ImageName (string) --
The name of the container image related to a finding.
LaunchedAt (string) --
Indicates when the container started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
VolumeMounts (list) --
Provides information about the mounting of a volume in a container.
(dict) --
Describes the mounting of a volume in a container.
Name (string) --
The name of the volume.
MountPath (string) --
The path in the container at which the volume should be mounted.
Privileged (boolean) --
When this parameter is true , the container is given elevated privileges on the host container instance (similar to the root user).
Other (dict) --
Details about a resource that are not available in a type-specific details object. Use the Other object in the following cases.
Other object to populate the fields that are missing from the type-specific object.Other .AwsRdsEventSubscription (dict) --
Details about an RDS event notification subscription.
CustSubscriptionId (string) --
The identifier of the account that is associated with the event notification subscription.
CustomerAwsId (string) --
The identifier of the event notification subscription.
Enabled (boolean) --
Whether the event notification subscription is enabled.
EventCategoriesList (list) --
The list of event categories for the event notification subscription.
EventSubscriptionArn (string) --
The ARN of the event notification subscription.
SnsTopicArn (string) --
The ARN of the SNS topic to post the event notifications to.
SourceIdsList (list) --
A list of source identifiers for the event notification subscription.
SourceType (string) --
The source type for the event notification subscription.
Status (string) --
The status of the event notification subscription.
Valid values: creating | modifying | deleting | active | no-permission | topic-not-exist
SubscriptionCreationTime (string) --
The datetime when the event notification subscription was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsEcsService (dict) --
Details about a service within an ECS cluster.
CapacityProviderStrategy (list) --
The capacity provider strategy that the service uses.
(dict) --
Strategy item for the capacity provider strategy that the service uses.
Base (integer) --
The minimum number of tasks to run on the capacity provider. Only one strategy item can specify a value for Base .
The value must be between 0 and 100000.
CapacityProvider (string) --
The short name of the capacity provider.
Weight (integer) --
The relative percentage of the total number of tasks that should use the capacity provider.
If no weight is specified, the default value is 0. At least one capacity provider must have a weight greater than 0.
The value can be between 0 and 1000.
Cluster (string) --
The ARN of the cluster that hosts the service.
DeploymentConfiguration (dict) --
Deployment parameters for the service. Includes the number of tasks that run and the order in which to start and stop tasks.
DeploymentCircuitBreaker (dict) --
Determines whether a service deployment fails if a service cannot reach a steady state.
Enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
Rollback (boolean) --
Whether to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
MaximumPercent (integer) --
For a service that uses the rolling update (ECS ) deployment type, the maximum number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, and for tasks that use the EC2 launch type, when any container instances are in the DRAINING state. Provided as a percentage of the desired number of tasks. The default value is 200%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types, and tasks that use the EC2 launch type, the maximum number of tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the maximum percent value is not used.
MinimumHealthyPercent (integer) --
For a service that uses the rolling update (ECS ) deployment type, the minimum number of tasks in a service that must remain in the RUNNING state during a deployment, and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Expressed as a percentage of the desired number of tasks. The default value is 100%.
For a service that uses the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state.
For the Fargate launch type, the minimum healthy percent value is not used.
DeploymentController (dict) --
Contains the deployment controller type that the service uses.
Type (string) --
The rolling update (ECS ) deployment type replaces the current running version of the container with the latest version.
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model that is powered by CodeDeploy. This deployment model a new deployment of a service can be verified before production traffic is sent to it.
The external (EXTERNAL ) deployment type allows the use of any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
Valid values: ECS | CODE_DEPLOY | EXTERNAL
DesiredCount (integer) --
The number of instantiations of the task definition to run on the service.
EnableEcsManagedTags (boolean) --
Whether to enable Amazon ECS managed tags for the tasks in the service.
EnableExecuteCommand (boolean) --
Whether the execute command functionality is enabled for the service.
HealthCheckGracePeriodSeconds (integer) --
After a task starts, the amount of time in seconds that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks.
LaunchType (string) --
The launch type that the service uses.
Valid values: EC2 | FARGATE | EXTERNAL
LoadBalancers (list) --
Information about the load balancers that the service uses.
(dict) --
Information about a load balancer that the service uses.
ContainerName (string) --
The name of the container to associate with the load balancer.
ContainerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
LoadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
Only specified when using a Classic Load Balancer. For an Application Load Balancer or a Network Load Balancer, the load balancer name is omitted.
TargetGroupArn (string) --
The ARN of the Elastic Load Balancing target group or groups associated with a service or task set.
Only specified when using an Application Load Balancer or a Network Load Balancer. For a Classic Load Balancer, the target group ARN is omitted.
Name (string) --
The name of the service.
NetworkConfiguration (dict) --
For tasks that use the awsvpc networking mode, the VPC subnet and security group configuration.
AwsVpcConfiguration (dict) --
The VPC subnet and security group configuration.
AssignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
Valid values: ENABLED | DISABLED
SecurityGroups (list) --
The IDs of the security groups associated with the task or service.
You can provide up to five security groups.
Subnets (list) --
The IDs of the subnets associated with the task or service.
You can provide up to 16 subnets.
PlacementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
A placement constraint for the tasks in the service.
Expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance .
Type (string) --
The type of constraint. Use distinctInstance to run each task in a particular group on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
Valid values: distinctInstance | memberOf
PlacementStrategies (list) --
Information about how tasks for the service are placed.
(dict) --
A placement strategy that determines how to place the tasks for the service.
Field (string) --
The field to apply the placement strategy against.
For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone .
For the binpack placement strategy, valid values are cpu and memory .
For the random placement strategy, this attribute is not used.
Type (string) --
The type of placement strategy.
The random placement strategy randomly places tasks on available candidates.
The spread placement strategy spreads placement across available candidates evenly based on the value of Field .
The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified in Field .
Valid values: random | spread | binpack
PlatformVersion (string) --
The platform version on which to run the service. Only specified for tasks that are hosted on Fargate. If a platform version is not specified, the LATEST platform version is used by default.
PropagateTags (string) --
Indicates whether to propagate the tags from the task definition to the task or from the service to the task. If no value is provided, then tags are not propagated.
Valid values: TASK_DEFINITION | SERVICE
Role (string) --
The ARN of the IAM role that is associated with the service. The role allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
SchedulingStrategy (string) --
The scheduling strategy to use for the service.
The REPLICA scheduling strategy places and maintains the desired number of tasks across the cluster. By default, the service scheduler spreads tasks across Availability Zones. Task placement strategies and constraints are used to customize task placement decisions.
The DAEMON scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that are specified in the cluster. The service scheduler also evaluates the task placement constraints for running tasks and stops tasks that do not meet the placement constraints.
Valid values: REPLICA | DAEMON
ServiceArn (string) --
The ARN of the service.
ServiceName (string) --
The name of the service.
The name can contain up to 255 characters. It can use letters, numbers, underscores, and hyphens.
ServiceRegistries (list) --
Information about the service discovery registries to assign to the service.
(dict) --
Information about a service discovery registry to assign to the service.
ContainerName (string) --
The container name value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
ContainerPort (integer) --
The port value to use for the service discovery service.
If the task definition uses the bridge or host network mode, you must specify ContainerName and ContainerPort .
If the task definition uses the awsvpc network mode and a type SRV DNS record, you must specify either ContainerName and ContainerPort , or Port , but not both.
Port (integer) --
The port value to use for a service discovery service that specifies an SRV record. This field can be used if both the awsvpc awsvpc network mode and SRV records are used.
RegistryArn (string) --
The ARN of the service registry.
TaskDefinition (string) --
The task definition to use for tasks in the service.
AwsAutoScalingLaunchConfiguration (dict) --
Provides details about a launch configuration.
AssociatePublicIpAddress (boolean) --
For Auto Scaling groups that run in a VPC, specifies whether to assign a public IP address to the group's instances.
BlockDeviceMappings (list) --
Specifies the block devices for the instance.
(dict) --
A block device for the instance.
DeviceName (string) --
The device name that is exposed to the EC2 instance. For example, /dev/sdh or xvdh .
Ebs (dict) --
Parameters that are used to automatically set up Amazon EBS volumes when an instance is launched.
DeleteOnTermination (boolean) --
Whether to delete the volume when the instance is terminated.
Encrypted (boolean) --
Whether to encrypt the volume.
Iops (integer) --
The number of input/output (I/O) operations per second (IOPS) to provision for the volume.
Only supported for gp3 or io1 volumes. Required for io1 volumes. Not used with standard , gp2 , st1 , or sc1 volumes.
SnapshotId (string) --
The snapshot ID of the volume to use.
You must specify either VolumeSize or SnapshotId .
VolumeSize (integer) --
The volume size, in GiBs. The following are the supported volumes sizes for each volume type:
You must specify either SnapshotId or VolumeSize . If you specify both SnapshotId and VolumeSize , the volume size must be equal or greater than the size of the snapshot.
VolumeType (string) --
The volume type.
NoDevice (boolean) --
Whether to suppress the device that is included in the block device mapping of the Amazon Machine Image (AMI).
If NoDevice is true , then you cannot specify Ebs .>
VirtualName (string) --
The name of the virtual device (for example, ephemeral0 ).
You can provide either VirtualName or Ebs , but not both.
ClassicLinkVpcId (string) --
The identifier of a ClassicLink-enabled VPC that EC2-Classic instances are linked to.
ClassicLinkVpcSecurityGroups (list) --
The identifiers of one or more security groups for the VPC that is specified in ClassicLinkVPCId .
CreatedTime (string) --
The creation date and time for the launch configuration.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
EbsOptimized (boolean) --
Whether the launch configuration is optimized for Amazon EBS I/O.
IamInstanceProfile (string) --
The name or the ARN of the instance profile associated with the IAM role for the instance. The instance profile contains the IAM role.
ImageId (string) --
The identifier of the Amazon Machine Image (AMI) that is used to launch EC2 instances.
InstanceMonitoring (dict) --
Indicates the type of monitoring for instances in the group.
Enabled (boolean) --
If set to true , then instances in the group launch with detailed monitoring.
If set to false , then instances in the group launch with basic monitoring.
InstanceType (string) --
The instance type for the instances.
KernelId (string) --
The identifier of the kernel associated with the AMI.
KeyName (string) --
The name of the key pair.
LaunchConfigurationName (string) --
The name of the launch configuration.
PlacementTenancy (string) --
The tenancy of the instance. An instance with dedicated tenancy runs on isolated, single-tenant hardware and can only be launched into a VPC.
RamdiskId (string) --
The identifier of the RAM disk associated with the AMI.
SecurityGroups (list) --
The security groups to assign to the instances in the Auto Scaling group.
SpotPrice (string) --
The maximum hourly price to be paid for any Spot Instance that is launched to fulfill the request.
UserData (string) --
The user data to make available to the launched EC2 instances. Must be base64-encoded text.
MetadataOptions (dict) --
The metadata options for the instances.
HttpEndpoint (string) --
Enables or disables the HTTP metadata endpoint on your instances. By default, the metadata endpoint is enabled.
HttpPutResponseHopLimit (integer) --
The HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
HttpTokens (string) --
Indicates whether token usage is required or optional for metadata requests. By default, token usage is optional .
AwsEc2VpnConnection (dict) --
Details about an Amazon EC2 VPN connection.
VpnConnectionId (string) --
The identifier of the VPN connection.
State (string) --
The current state of the VPN connection.
CustomerGatewayId (string) --
The identifier of the customer gateway that is at your end of the VPN connection.
CustomerGatewayConfiguration (string) --
The configuration information for the VPN connection's customer gateway, in the native XML format.
Type (string) --
The type of VPN connection.
VpnGatewayId (string) --
The identifier of the virtual private gateway that is at the Amazon Web Services side of the VPN connection.
Category (string) --
The category of the VPN connection. VPN indicates an Amazon Web Services VPN connection. VPN-Classic indicates an Amazon Web Services Classic VPN connection.
VgwTelemetry (list) --
Information about the VPN tunnel.
(dict) --
Information about the VPN tunnel.
AcceptedRouteCount (integer) --
The number of accepted routes.
CertificateArn (string) --
The ARN of the VPN tunnel endpoint certificate.
LastStatusChange (string) --
The date and time of the last change in status.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
OutsideIpAddress (string) --
The Internet-routable IP address of the virtual private gateway's outside interface.
Status (string) --
The status of the VPN tunnel.
StatusMessage (string) --
If an error occurs, a description of the error.
Options (dict) --
The VPN connection options.
StaticRoutesOnly (boolean) --
Whether the VPN connection uses static routes only.
TunnelOptions (list) --
The VPN tunnel options.
(dict) --
The VPN tunnel options.
DpdTimeoutSeconds (integer) --
The number of seconds after which a Dead Peer Detection (DPD) timeout occurs.
IkeVersions (list) --
The Internet Key Exchange (IKE) versions that are permitted for the VPN tunnel.
OutsideIpAddress (string) --
The external IP address of the VPN tunnel.
Phase1DhGroupNumbers (list) --
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.
Phase1EncryptionAlgorithms (list) --
The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.
Phase1IntegrityAlgorithms (list) --
The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.
Phase1LifetimeSeconds (integer) --
The lifetime for phase 1 of the IKE negotiation, in seconds.
Phase2DhGroupNumbers (list) --
The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.
Phase2EncryptionAlgorithms (list) --
The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.
Phase2IntegrityAlgorithms (list) --
The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.
Phase2LifetimeSeconds (integer) --
The lifetime for phase 2 of the IKE negotiation, in seconds.
PreSharedKey (string) --
The preshared key to establish initial authentication between the virtual private gateway and the customer gateway.
RekeyFuzzPercentage (integer) --
The percentage of the rekey window, which is determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.
RekeyMarginTimeSeconds (integer) --
The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.
ReplayWindowSize (integer) --
The number of packets in an IKE replay window.
TunnelInsideCidr (string) --
The range of inside IPv4 addresses for the tunnel.
Routes (list) --
The static routes that are associated with the VPN connection.
(dict) --
A static routes associated with the VPN connection.
DestinationCidrBlock (string) --
The CIDR block associated with the local subnet of the customer data center.
State (string) --
The current state of the static route.
TransitGatewayId (string) --
The identifier of the transit gateway that is associated with the VPN connection.
AwsEcrContainerImage (dict) --
Information about an Amazon ECR image.
RegistryId (string) --
The Amazon Web Services account identifier that is associated with the registry that the image belongs to.
RepositoryName (string) --
The name of the repository that the image belongs to.
Architecture (string) --
The architecture of the image.
ImageDigest (string) --
The sha256 digest of the image manifest.
ImageTags (list) --
The list of tags that are associated with the image.
ImagePublishedAt (string) --
The date and time when the image was pushed to the repository.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
AwsOpenSearchServiceDomain (dict) --
Details about an Amazon OpenSearch Service domain.
Arn (string) --
The ARN of the OpenSearch Service domain.
AccessPolicies (string) --
IAM policy document that specifies the access policies for the OpenSearch Service domain.
DomainName (string) --
The name of the endpoint.
Id (string) --
The identifier of the domain.
DomainEndpoint (string) --
The domain endpoint.
EngineVersion (string) --
The version of the domain engine.
EncryptionAtRestOptions (dict) --
Details about the configuration for encryption at rest.
Enabled (boolean) --
Whether encryption at rest is enabled.
KmsKeyId (string) --
The KMS key ID.
NodeToNodeEncryptionOptions (dict) --
Details about the configuration for node-to-node encryption.
Enabled (boolean) --
Whether node-to-node encryption is enabled.
ServiceSoftwareOptions (dict) --
Information about the status of a domain relative to the latest service software.
AutomatedUpdateDate (string) --
The epoch time when the deployment window closes for required updates. After this time, OpenSearch Service schedules the software upgrade automatically.
Cancellable (boolean) --
Whether a request to update the domain can be canceled.
CurrentVersion (string) --
The version of the service software that is currently installed on the domain.
Description (string) --
A more detailed description of the service software status.
NewVersion (string) --
The most recent version of the service software.
UpdateAvailable (boolean) --
Whether a service software update is available for the domain.
UpdateStatus (string) --
The status of the service software update.
OptionalDeployment (boolean) --
Whether the service software update is optional.
ClusterConfig (dict) --
Details about the configuration of an OpenSearch cluster.
InstanceCount (integer) --
The number of data nodes to use in the OpenSearch domain.
WarmEnabled (boolean) --
Whether UltraWarm is enabled.
WarmCount (integer) --
The number of UltraWarm instances.
DedicatedMasterEnabled (boolean) --
Whether to use a dedicated master node for the OpenSearch domain. A dedicated master node performs cluster management tasks, but does not hold data or respond to data upload requests.
ZoneAwarenessConfig (dict) --
Configuration options for zone awareness. Provided if ZoneAwarenessEnabled is true .
AvailabilityZoneCount (integer) --
The number of Availability Zones that the domain uses. Valid values are 2 and 3. The default is 2.
DedicatedMasterCount (integer) --
The number of instances to use for the master node. If this attribute is specified, then DedicatedMasterEnabled must be true .
InstanceType (string) --
The instance type for your data nodes.
WarmType (string) --
The type of UltraWarm instance.
ZoneAwarenessEnabled (boolean) --
Whether to enable zone awareness for the OpenSearch domain. When zone awareness is enabled, OpenSearch Service allocates the cluster's nodes and replica index shards across Availability Zones (AZs) in the same Region. This prevents data loss and minimizes downtime if a node or data center fails.
DedicatedMasterType (string) --
The hardware configuration of the computer that hosts the dedicated master node.
If this attribute is specified, then DedicatedMasterEnabled must be true .
DomainEndpointOptions (dict) --
Additional options for the domain endpoint.
CustomEndpointCertificateArn (string) --
The ARN for the security certificate. The certificate is managed in ACM.
CustomEndpointEnabled (boolean) --
Whether to enable a custom endpoint for the domain.
EnforceHTTPS (boolean) --
Whether to require that all traffic to the domain arrive over HTTPS.
CustomEndpoint (string) --
The fully qualified URL for the custom endpoint.
TLSSecurityPolicy (string) --
The TLS security policy to apply to the HTTPS endpoint of the OpenSearch domain.
VpcOptions (dict) --
Information that OpenSearch Service derives based on VPCOptions for the domain.
SecurityGroupIds (list) --
The list of security group IDs that are associated with the VPC endpoints for the domain.
SubnetIds (list) --
A list of subnet IDs that are associated with the VPC endpoints for the domain.
LogPublishingOptions (dict) --
Configures the CloudWatch Logs to publish for the OpenSearch domain.
IndexSlowLogs (dict) --
Configures the OpenSearch index logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
SearchSlowLogs (dict) --
Configures the OpenSearch search slow log publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
AuditLogs (dict) --
Configures the OpenSearch audit logs publishing.
CloudWatchLogsLogGroupArn (string) --
The ARN of the CloudWatch Logs group to publish the logs to.
Enabled (boolean) --
Whether the log publishing is enabled.
DomainEndpoints (dict) --
The domain endpoints. Used if the OpenSearch domain resides in a VPC.
This is a map of key-value pairs. The key is always vpc . The value is the endpoint.
AdvancedSecurityOptions (dict) --
Specifies options for fine-grained access control.
Enabled (boolean) --
Enables fine-grained access control.
InternalUserDatabaseEnabled (boolean) --
Enables the internal user database.
MasterUserOptions (dict) --
Specifies information about the master user of the domain.
MasterUserArn (string) --
The Amazon Resource Name (ARN) for the master user.
MasterUserName (string) --
The username for the master user.
MasterUserPassword (string) --
The password for the master user.
AwsEc2VpcEndpointService (dict) --
Details about the service configuration for a VPC endpoint service.
AcceptanceRequired (boolean) --
Whether requests from other Amazon Web Services accounts to create an endpoint to the service must first be accepted.
AvailabilityZones (list) --
The Availability Zones where the service is available.
BaseEndpointDnsNames (list) --
The DNS names for the service.
ManagesVpcEndpoints (boolean) --
Whether the service manages its VPC endpoints.
GatewayLoadBalancerArns (list) --
The ARNs of the Gateway Load Balancers for the service.
NetworkLoadBalancerArns (list) --
The ARNs of the Network Load Balancers for the service.
PrivateDnsName (string) --
The private DNS name for the service.
ServiceId (string) --
The identifier of the service.
ServiceName (string) --
The name of the service.
ServiceState (string) --
The current state of the service.
ServiceType (list) --
The types for the service.
(dict) --
The service type information for a VPC endpoint service.
ServiceType (string) --
The type of service.
AwsXrayEncryptionConfig (dict) --
Information about the encryption configuration for X-Ray.
KeyId (string) --
The identifier of the KMS key that is used for encryption. Provided if Type is KMS .
Status (string) --
The current status of the encryption configuration. When Status is UPDATING , X-Ray might use both the old and new encryption.
Type (string) --
The type of encryption. KMS indicates that the encryption uses KMS keys. NONE indicates to use the default encryption.
AwsWafRateBasedRule (dict) --
Details about a rate-based rule for global resources.
MetricName (string) --
The name of the metrics for the rate-based rule.
Name (string) --
The name of the rate-based rule.
RateKey (string) --
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
RateLimit (integer) --
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
RuleId (string) --
The unique identifier for the rate-based rule.
MatchPredicates (list) --
The predicates to include in the rate-based rule.
(dict) --
A match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
DataId (string) --
The unique identifier for the predicate.
Negated (boolean) --
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
Type (string) --
The type of predicate.
AwsWafRegionalRateBasedRule (dict) --
Details about a rate-based rule for Regional resources.
MetricName (string) --
The name of the metrics for the rate-based rule.
Name (string) --
The name of the rate-based rule.
RateKey (string) --
The field that WAF uses to determine whether requests are likely arriving from single source and are subject to rate monitoring.
RateLimit (integer) --
The maximum number of requests that have an identical value for the field specified in RateKey that are allowed within a five-minute period. If the number of requests exceeds RateLimit and the other predicates specified in the rule are met, WAF triggers the action for the rule.
RuleId (string) --
The unique identifier for the rate-based rule.
MatchPredicates (list) --
The predicates to include in the rate-based rule.
(dict) --
Details for a match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.
DataId (string) --
The unique identifier for the predicate.
Negated (boolean) --
If set to true , then the rule actions are performed on requests that match the predicate settings.
If set to false , then the rule actions are performed on all requests except those that match the predicate settings.
Type (string) --
The type of predicate.
AwsEcrRepository (dict) --
Information about an Amazon Elastic Container Registry repository.
Arn (string) --
The ARN of the repository.
ImageScanningConfiguration (dict) --
The image scanning configuration for a repository.
ScanOnPush (boolean) --
Whether to scan images after they are pushed to a repository.
ImageTagMutability (string) --
The tag mutability setting for the repository.
LifecyclePolicy (dict) --
Information about the lifecycle policy for the repository.
LifecyclePolicyText (string) --
The text of the lifecycle policy.
RegistryId (string) --
The Amazon Web Services account identifier that is associated with the registry that contains the repository.
RepositoryName (string) --
The name of the repository.
RepositoryPolicyText (string) --
The text of the repository policy.
AwsEksCluster (dict) --
Details about an Amazon EKS cluster.
Arn (string) --
The ARN of the cluster.
CertificateAuthorityData (string) --
The certificate authority data for the cluster.
ClusterStatus (string) --
The status of the cluster.
Endpoint (string) --
The endpoint for the Amazon EKS API server.
Name (string) --
The name of the cluster.
ResourcesVpcConfig (dict) --
The VPC configuration used by the cluster control plane.
SecurityGroupIds (list) --
The security groups that are associated with the cross-account elastic network interfaces that are used to allow communication between your nodes and the Amazon EKS control plane.
SubnetIds (list) --
The subnets that are associated with the cluster.
RoleArn (string) --
The ARN of the IAM role that provides permissions for the Amazon EKS control plane to make calls to Amazon Web Services API operations on your behalf.
Version (string) --
The Amazon EKS server version for the cluster.
Logging (dict) --
The logging configuration for the cluster.
ClusterLogging (list) --
Cluster logging configurations.
(dict) --
Details for a cluster logging configuration.
Enabled (boolean) --
Whether the logging types that are listed in Types are enabled.
Types (list) --
A list of logging types.
AwsNetworkFirewallFirewallPolicy (dict) --
Details about an Network Firewall firewall policy.
FirewallPolicy (dict) --
The firewall policy configuration.
StatefulRuleGroupReferences (list) --
The stateful rule groups that are used in the firewall policy.
(dict) --
A stateful rule group that is used by the firewall policy.
ResourceArn (string) --
The ARN of the stateful rule group.
StatelessCustomActions (list) --
The custom action definitions that are available to use in the firewall policy's StatelessDefaultActions setting.
(dict) --
A custom action that can be used for stateless packet handling.
ActionDefinition (dict) --
The definition of the custom action.
PublishMetricAction (dict) --
Information about metrics to publish to CloudWatch.
Dimensions (list) --
Defines CloudWatch dimension values to publish.
(dict) --
Defines a CloudWatch dimension value to publish.
Value (string) --
The value to use for the custom metric dimension.
ActionName (string) --
The name of the custom action.
StatelessDefaultActions (list) --
The actions to take on a packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
StatelessFragmentDefaultActions (list) --
The actions to take on a fragmented UDP packet if it doesn't match any of the stateless rules in the policy.
You must specify a standard action (aws:pass , aws:drop , aws:forward_to_sfe ), and can optionally include a custom action from StatelessCustomActions .
StatelessRuleGroupReferences (list) --
The stateless rule groups that are used in the firewall policy.
(dict) --
A stateless rule group that is used by the firewall policy.
Priority (integer) --
The order in which to run the stateless rule group.
ResourceArn (string) --
The ARN of the stateless rule group.
FirewallPolicyArn (string) --
The ARN of the firewall policy.
FirewallPolicyId (string) --
The identifier of the firewall policy.
FirewallPolicyName (string) --
The name of the firewall policy.
Description (string) --
A description of the firewall policy.
AwsNetworkFirewallFirewall (dict) --
Details about an Network Firewall firewall.
DeleteProtection (boolean) --
Whether the firewall is protected from deletion. If set to true , then the firewall cannot be deleted.
Description (string) --
A description of the firewall.
FirewallArn (string) --
The ARN of the firewall.
FirewallId (string) --
The identifier of the firewall.
FirewallName (string) --
A descriptive name of the firewall.
FirewallPolicyArn (string) --
The ARN of the firewall policy.
FirewallPolicyChangeProtection (boolean) --
Whether the firewall is protected from a change to the firewall policy. If set to true , you cannot associate a different policy with the firewall.
SubnetChangeProtection (boolean) --
Whether the firewall is protected from a change to the subnet associations. If set to true , you cannot map different subnets to the firewall.
SubnetMappings (list) --
The public subnets that Network Firewall uses for the firewall. Each subnet must belong to a different Availability Zone.
(dict) --
A public subnet that Network Firewall uses for the firewall.
SubnetId (string) --
The identifier of the subnet
VpcId (string) --
The identifier of the VPC where the firewall is used.
AwsNetworkFirewallRuleGroup (dict) --
Details about an Network Firewall rule group.
Capacity (integer) --
The maximum number of operating resources that this rule group can use.
Description (string) --
A description of the rule group.
RuleGroup (dict) --
Details about the rule group.
RuleVariables (dict) --
Additional settings to use in the specified rules.
IpSets (dict) --
A list of IP addresses and address ranges, in CIDR notation.
Definition (list) --
The list of IP addresses and ranges.
PortSets (dict) --
A list of port ranges.
Definition (list) --
The list of port ranges.
RulesSource (dict) --
The rules and actions for the rule group.
For stateful rule groups, can contain RulesString , RulesSourceList , or StatefulRules .
For stateless rule groups, contains StatelessRulesAndCustomActions .
RulesSourceList (dict) --
Stateful inspection criteria for a domain list rule group. A domain list rule group determines access by specific protocols to specific domains.
GeneratedRulesType (string) --
Indicates whether to allow or deny access to the domains listed in Targets .
TargetTypes (list) --
The protocols that you want to inspect. Specify LS_SNI for HTTPS. Specify HTTP_HOST for HTTP. You can specify either or both.
Targets (list) --
The domains that you want to inspect for in your traffic flows. You can provide full domain names, or use the '.' prefix as a wildcard. For example, .example.com matches all domains that end with example.com .
RulesString (string) --
Stateful inspection criteria, provided in Suricata compatible intrusion prevention system (IPS) rules.
StatefulRules (list) --
Suricata rule specifications.
(dict) --
A Suricata rule specification.
Action (string) --
Defines what Network Firewall should do with the packets in a traffic flow when the flow matches the stateful rule criteria.
Header (dict) --
The stateful inspection criteria for the rule.
Destination (string) --
The destination IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
DestinationPort (string) --
The destination port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
Direction (string) --
The direction of traffic flow to inspect. If set to ANY , the inspection matches bidirectional traffic, both from the source to the destination and from the destination to the source. If set to FORWARD , the inspection only matches traffic going from the source to the destination.
Protocol (string) --
The protocol to inspect for. To inspector for all protocols, use IP .
Source (string) --
The source IP address or address range to inspect for, in CIDR notation. To match with any address, specify ANY .
SourcePort (string) --
The source port to inspect for. You can specify an individual port, such as 1994 . You also can specify a port range, such as 1990:1994 . To match with any port, specify ANY .
RuleOptions (list) --
Additional options for the rule.
(dict) --
A rule option for a stateful rule.
Keyword (string) --
A keyword to look for.
Settings (list) --
A list of settings.
StatelessRulesAndCustomActions (dict) --
The stateless rules and custom actions used by a stateless rule group.
CustomActions (list) --
Custom actions for the rule group.
(dict) --
A custom action definition. A custom action is an optional, non-standard action to use for stateless packet handling.
ActionDefinition (dict) --
The definition of a custom action.
PublishMetricAction (dict) --
Information about metrics to publish to CloudWatch.
Dimensions (list) --
Defines CloudWatch dimension values to publish.
(dict) --
Defines a CloudWatch dimension value to publish.
Value (string) --
The value to use for the custom metric dimension.
ActionName (string) --
A descriptive name of the custom action.
StatelessRules (list) --
Stateless rules for the rule group.
(dict) --
A stateless rule in the rule group.
Priority (integer) --
Indicates the order in which to run this rule relative to all of the rules in the stateless rule group.
RuleDefinition (dict) --
Provides the definition of the stateless rule.
Actions (list) --
The actions to take on a packet that matches one of the stateless rule definition's match attributes. You must specify a standard action (aws:pass , aws:drop , or aws:forward_to_sfe ). You can then add custom actions.
MatchAttributes (dict) --
The criteria for Network Firewall to use to inspect an individual packet in a stateless rule inspection.
DestinationPorts (list) --
A list of port ranges to specify the destination ports to inspect for.
(dict) --
A port range to specify the destination ports to inspect for.
FromPort (integer) --
The starting port value for the port range.
ToPort (integer) --
The ending port value for the port range.
Destinations (list) --
The destination IP addresses and address ranges to inspect for, in CIDR notation.
(dict) --
A destination IP address or range.
AddressDefinition (string) --
An IP address or a block of IP addresses.
Protocols (list) --
The protocols to inspect for.
SourcePorts (list) --
A list of port ranges to specify the source ports to inspect for.
(dict) --
A port range to specify the source ports to inspect for.
FromPort (integer) --
The starting port value for the port range.
ToPort (integer) --
The ending port value for the port range.
Sources (list) --
The source IP addresses and address ranges to inspect for, in CIDR notation.
(dict) --
A source IP addresses and address range to inspect for.
AddressDefinition (string) --
An IP address or a block of IP addresses.
TcpFlags (list) --
The TCP flags and masks to inspect for.
(dict) --
A set of TCP flags and masks to inspect for.
Flags (list) --
Defines the flags from the Masks setting that must be set in order for the packet to match. Flags that are listed must be set. Flags that are not listed must not be set.
Masks (list) --
The set of flags to consider in the inspection. If not specified, then all flags are inspected.
RuleGroupArn (string) --
The ARN of the rule group.
RuleGroupId (string) --
The identifier of the rule group.
RuleGroupName (string) --
The descriptive name of the rule group.
Type (string) --
The type of rule group. A rule group can be stateful or stateless.
AwsRdsDbSecurityGroup (dict) --
Details about an Amazon RDS DB security group.
DbSecurityGroupArn (string) --
The ARN for the DB security group.
DbSecurityGroupDescription (string) --
Provides the description of the DB security group.
DbSecurityGroupName (string) --
Specifies the name of the DB security group.
Ec2SecurityGroups (list) --
Contains a list of EC2 security groups.
(dict) --
EC2 security group information for an RDS DB security group.
Ec2SecurityGroupId (string) --
Specifies the ID for the EC2 security group.
Ec2SecurityGroupName (string) --
Specifies the name of the EC2 security group.
Ec2SecurityGroupOwnerId (string) --
Provides the Amazon Web Services ID of the owner of the EC2 security group.
Status (string) --
Provides the status of the EC2 security group.
IpRanges (list) --
Contains a list of IP ranges.
(dict) --
IP range information for an RDS DB security group.
CidrIp (string) --
Specifies the IP range.
Status (string) --
Specifies the status of the IP range.
OwnerId (string) --
Provides the Amazon Web Services ID of the owner of a specific DB security group.
VpcId (string) --
Provides VPC ID associated with the DB security group.
AwsKinesisStream (dict) --
Details about an Amazon Kinesis data stream.
Name (string) --
The name of the Kinesis stream. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the stream name.
Arn (string) --
The Amazon Resource Name (ARN) of the Kinesis data stream.
StreamEncryption (dict) --
When specified, enables or updates server-side encryption using an KMS key for a specified stream. Removing this property from your stack template and updating your stack disables encryption.
EncryptionType (string) --
The encryption type to use.
KeyId (string) --
The globally unique identifier for the customer-managed KMS key to use for encryption.
ShardCount (integer) --
The number of shards that the stream uses.
RetentionPeriodHours (integer) --
The number of hours for the data records that are stored in shards to remain accessible.
AwsEc2TransitGateway (dict) --
Details about an Amazon EC2 transit gateway that interconnects your virtual private clouds (VPC) and on-premises networks.
Id (string) --
The ID of the transit gateway.
Description (string) --
The description of the transit gateway.
DefaultRouteTablePropagation (string) --
Turn on or turn off automatic propagation of routes to the default propagation route table.
AutoAcceptSharedAttachments (string) --
Turn on or turn off automatic acceptance of attachment requests.
DefaultRouteTableAssociation (string) --
Turn on or turn off automatic association with the default association route table.
TransitGatewayCidrBlocks (list) --
The transit gateway Classless Inter-Domain Routing (CIDR) blocks.
AssociationDefaultRouteTableId (string) --
The ID of the default association route table.
PropagationDefaultRouteTableId (string) --
The ID of the default propagation route table.
VpnEcmpSupport (string) --
Turn on or turn off Equal Cost Multipath Protocol (ECMP) support.
DnsSupport (string) --
Turn on or turn off DNS support.
MulticastSupport (string) --
Indicates whether multicast is supported on the transit gateway.
AmazonSideAsn (integer) --
A private Autonomous System Number (ASN) for the Amazon side of a BGP session.
AwsEfsAccessPoint (dict) --
Details about an Amazon EFS access point. An access point is an application-specific view into an EFS file system that applies an operating system user and group, and a file system path, to any file system request made through the access point.
AccessPointId (string) --
The ID of the Amazon EFS access point.
Arn (string) --
The Amazon Resource Name (ARN) of the Amazon EFS access point.
ClientToken (string) --
The opaque string specified in the request to ensure idempotent creation.
FileSystemId (string) --
The ID of the Amazon EFS file system that the access point applies to.
PosixUser (dict) --
The full POSIX identity, including the user ID, group ID, and secondary group IDs on the access point, that is used for all file operations by NFS clients using the access point.
Gid (string) --
The POSIX group ID used for all file system operations using this access point.
SecondaryGids (list) --
Secondary POSIX group IDs used for all file system operations using this access point.
Uid (string) --
The POSIX user ID used for all file system operations using this access point.
RootDirectory (dict) --
The directory on the Amazon EFS file system that the access point exposes as the root directory to NFS clients using the access point.
CreationInfo (dict) --
Specifies the POSIX IDs and permissions to apply to the access point's root directory.
OwnerGid (string) --
Specifies the POSIX group ID to apply to the root directory.
OwnerUid (string) --
Specifies the POSIX user ID to apply to the root directory.
Permissions (string) --
Specifies the POSIX permissions to apply to the root directory, in the format of an octal number representing the file's mode bits.
Path (string) --
Specifies the path on the Amazon EFS file system to expose as the root directory to NFS clients using the access point to access the EFS file system. A path can have up to four subdirectories. If the specified path does not exist, you are required to provide CreationInfo .
AwsCloudFormationStack (dict) --
Details about an CloudFormation stack. A stack is a collection of Amazon Web Services resources that you can manage as a single unit.
Capabilities (list) --
The capabilities allowed in the stack.
CreationTime (string) --
The time at which the stack was created.
Description (string) --
A user-defined description associated with the stack.
DisableRollback (boolean) --
Boolean to enable or disable rollback on stack creation failures.
DriftInformation (dict) --
Information about whether a stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters.
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
EnableTerminationProtection (boolean) --
Whether termination protection is enabled for the stack.
LastUpdatedTime (string) --
The time the nested stack was last updated. This field will only be returned if the stack has been updated at least once.
NotificationArns (list) --
The Amazon Resource Names (ARNs) of the Amazon SNS topic to which stack-related events are published.
Outputs (list) --
A list of output structures.
(dict) --
Provides information about the CloudFormation stack output.
Description (string) --
A user-defined description associated with the output.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
RoleArn (string) --
The ARN of an IAM role that's associated with the stack.
StackId (string) --
Unique identifier of the stack.
StackName (string) --
The name associated with the stack.
StackStatus (string) --
Current status of the stack.
StackStatusReason (string) --
Success or failure message associated with the stack status.
TimeoutInMinutes (integer) --
The length of time, in minutes, that CloudFormation waits for the nested stack to reach the CREATE_COMPLETE state.
AwsCloudWatchAlarm (dict) --
Details about an Amazon CloudWatch alarm. An alarm allows you to monitor and receive alerts about your Amazon Web Services resources and applications across multiple Regions.
ActionsEnabled (boolean) --
Indicates whether actions should be executed during any changes to the alarm state.
AlarmActions (list) --
The list of actions, specified as Amazon Resource Names (ARNs) to execute when this alarm transitions into an ALARM state from any other state.
AlarmArn (string) --
The ARN of the alarm.
AlarmConfigurationUpdatedTimestamp (string) --
The time stamp of the last update to the alarm configuration.
AlarmDescription (string) --
The description of the alarm.
AlarmName (string) --
The name of the alarm. If you don't specify a name, CloudFront generates a unique physical ID and uses that ID for the alarm name.
ComparisonOperator (string) --
The arithmetic operation to use when comparing the specified statistic and threshold. The specified statistic value is used as the first operand.
DatapointsToAlarm (integer) --
The number of datapoints that must be breaching to trigger the alarm.
Dimensions (list) --
The dimensions for the metric associated with the alarm.
(dict) --
Details about the dimensions for the metric associated with the alarm.
Name (string) --
The name of a dimension.
Value (string) --
The value of a dimension.
EvaluateLowSampleCountPercentile (string) --
Used only for alarms based on percentiles. If ignore , the alarm state does not change during periods with too few data points to be statistically significant. If evaluate or this parameter is not used, the alarm is always evaluated and possibly changes state no matter how many data points are available.
EvaluationPeriods (integer) --
The number of periods over which data is compared to the specified threshold.
ExtendedStatistic (string) --
The percentile statistic for the metric associated with the alarm.
InsufficientDataActions (list) --
The actions to execute when this alarm transitions to the INSUFFICIENT_DATA state from any other state. Each action is specified as an ARN.
MetricName (string) --
The name of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you use Metrics instead and you can't specify MetricName .
Namespace (string) --
The namespace of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you can't specify Namespace and you use Metrics instead.
OkActions (list) --
The actions to execute when this alarm transitions to the OK state from any other state. Each action is specified as an ARN.
Period (integer) --
The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric.
Statistic (string) --
The statistic for the metric associated with the alarm, other than percentile. For percentile statistics, use ExtendedStatistic .
For an alarm based on a metric, you must specify either Statistic or ExtendedStatistic but not both.
For an alarm based on a math expression, you can't specify Statistic . Instead, you use Metrics .
Threshold (float) --
The value to compare with the specified statistic.
ThresholdMetricId (string) --
n an alarm based on an anomaly detection model, this is the ID of the ANOMALY_DETECTION_BAND function used as the threshold for the alarm.
TreatMissingData (string) --
Sets how this alarm is to handle missing data points.
Unit (string) --
The unit of the metric associated with the alarm.
AwsEc2VpcPeeringConnection (dict) --
Details about an Amazon EC2 VPC peering connection. A VPC peering connection is a networking connection between two VPCs that enables you to route traffic between them privately.
AccepterVpcInfo (dict) --
Information about the accepter VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
CidrBlockSet (list) --
Information about the IPv4 CIDR blocks for the VPC.
(dict) --
Provides details about the IPv4 CIDR blocks for the VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
Ipv6CidrBlockSet (list) --
The IPv6 CIDR block for the VPC.
(dict) --
Provides details about the IPv6 CIDR blocks for the VPC.
Ipv6CidrBlock (string) --
The IPv6 CIDR block for the VPC.
OwnerId (string) --
The ID of the Amazon Web Services account that owns the VPC.
PeeringOptions (dict) --
Information about the VPC peering connection options for the accepter or requester VPC.
AllowDnsResolutionFromRemoteVpc (boolean) --
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
AllowEgressFromLocalClassicLinkToRemoteVpc (boolean) --
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
AllowEgressFromLocalVpcToRemoteClassicLink (boolean) --
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
Region (string) --
The Amazon Web Services Region in which the VPC is located.
VpcId (string) --
The ID of the VPC.
ExpirationTime (string) --
The time at which an unaccepted VPC peering connection will expire.
RequesterVpcInfo (dict) --
Information about the requester VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
CidrBlockSet (list) --
Information about the IPv4 CIDR blocks for the VPC.
(dict) --
Provides details about the IPv4 CIDR blocks for the VPC.
CidrBlock (string) --
The IPv4 CIDR block for the VPC.
Ipv6CidrBlockSet (list) --
The IPv6 CIDR block for the VPC.
(dict) --
Provides details about the IPv6 CIDR blocks for the VPC.
Ipv6CidrBlock (string) --
The IPv6 CIDR block for the VPC.
OwnerId (string) --
The ID of the Amazon Web Services account that owns the VPC.
PeeringOptions (dict) --
Information about the VPC peering connection options for the accepter or requester VPC.
AllowDnsResolutionFromRemoteVpc (boolean) --
Indicates whether a local VPC can resolve public DNS hostnames to private IP addresses when queried from instances in a peer VPC.
AllowEgressFromLocalClassicLinkToRemoteVpc (boolean) --
Indicates whether a local ClassicLink connection can communicate with the peer VPC over the VPC peering connection.
AllowEgressFromLocalVpcToRemoteClassicLink (boolean) --
Indicates whether a local VPC can communicate with a ClassicLink connection in the peer VPC over the VPC peering connection.
Region (string) --
The Amazon Web Services Region in which the VPC is located.
VpcId (string) --
The ID of the VPC.
Status (dict) --
The status of the VPC peering connection.
Code (string) --
The status of the VPC peering connection.
Message (string) --
A message that provides more information about the status, if applicable.
VpcPeeringConnectionId (string) --
The ID of the VPC peering connection.
AwsWafRegionalRuleGroup (dict) --
Details about an WAF rule group for Regional resources.
MetricName (string) --
A name for the metrics for this rule group.
Name (string) --
The descriptive name of the rule group.
RuleGroupId (string) --
The ID of the rule group.
Rules (list) --
Provides information about the rule statements used to identify the web requests that you want to allow, block, or count.
(dict) --
Provides information about the rules attached to a rule group
Action (dict) --
The action that WAF should take on a web request when it matches the criteria defined in the rule.
Type (string) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
Priority (integer) --
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
RuleId (string) --
The ID for a rule.
Type (string) --
The type of rule in the rule group.
AwsWafRegionalRule (dict) --
Details about an WAF rule for Regional resources.
MetricName (string) --
A name for the metrics for the rule.
Name (string) --
A descriptive name for the rule.
PredicateList (list) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
(dict) --
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
DataId (string) --
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Negated (boolean) --
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
Type (string) --
The type of predicate in a rule, such as ByteMatch or IPSet .
RuleId (string) --
The ID of the rule.
AwsWafRegionalWebAcl (dict) --
Details about an WAF web access control list (web ACL) for Regional resources.
DefaultAction (string) --
The action to perform if none of the rules contained in the web ACL match.
MetricName (string) --
A name for the metrics for this web ACL.
Name (string) --
A descriptive name for the web ACL.
RulesList (list) --
An array that contains the action for each rule in a web ACL, the priority of the rule, and the ID of the rule.
(dict) --
A combination of ByteMatchSet , IPSet , and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count.
Action (dict) --
The action that AWS WAF takes when a web request matches all conditions in the rule, such as allow, block, or count the request.
Type (string) --
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
OverrideAction (dict) --
Overrides the rule evaluation result in the rule group.
Type (string) --
Overrides the rule evaluation result in the rule group.
Priority (integer) --
The order in which WAF evaluates the rules in a web ACL.
RuleId (string) --
The ID of an WAF Regional rule to associate with a web ACL.
Type (string) --
For actions that are associated with a rule, the action that WAF takes when a web request matches all conditions in a rule.
WebAclId (string) --
The ID of the web ACL.
AwsWafRule (dict) --
Details about an WAF rule for global resources.
MetricName (string) --
The name of the metrics for this rule.
Name (string) --
A descriptive name for the rule.
PredicateList (list) --
Specifies the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
(dict) --
Provides details about the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.
DataId (string) --
A unique identifier for a predicate in a rule, such as ByteMatchSetId or IPSetId .
Negated (boolean) --
Specifies if you want WAF to allow, block, or count requests based on the settings in the ByteMatchSet , IPSet , SqlInjectionMatchSet , XssMatchSet , RegexMatchSet , GeoMatchSet , or SizeConstraintSet .
Type (string) --
The type of predicate in a rule, such as ByteMatch or IPSet .
RuleId (string) --
The ID of the WAF rule.
AwsWafRuleGroup (dict) --
Details about an WAF rule group for global resources.
MetricName (string) --
The name of the metrics for this rule group.
Name (string) --
The name of the rule group.
RuleGroupId (string) --
The ID of the rule group.
Rules (list) --
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
(dict) --
Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.
Action (dict) --
Provides information about what action WAF should take on a web request when it matches the criteria defined in the rule.
Type (string) --
The action that WAF should take on a web request when it matches the rule's statement.
Priority (integer) --
If you define more than one rule in a web ACL, WAF evaluates each request against the rules in order based on the value of Priority .
RuleId (string) --
The rule ID for a rule.
Type (string) --
The type of rule.
AwsEcsTask (dict) --
Details about a task in a cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the task.
TaskDefinitionArn (string) --
The ARN of the task definition that creates the task.
Version (string) --
The version counter for the task.
CreatedAt (string) --
The Unix timestamp for the time when the task was created. More specifically, it's for the time when the task entered the PENDING state.
StartedAt (string) --
The Unix timestamp for the time when the task started. More specifically, it's for the time when the task transitioned from the PENDING state to the RUNNING state.
StartedBy (string) --
The tag specified when a task is started. If an Amazon ECS service started the task, the startedBy parameter contains the deployment ID of that service.
Group (string) --
The name of the task group that's associated with the task.
Volumes (list) --
Details about the data volume that is used in a task definition.
(dict) --
Provides information about a data volume that's used in a task definition.
Name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
Host (dict) --
This parameter is specified when you use bind mount host volumes. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it's stored.
SourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that's presented to the container.
Containers (list) --
The containers that are associated with the task.
(dict) --
Provides information about an Amazon ECS container.
Name (string) --
The name of the container.
Image (string) --
The image used for the container.
MountPoints (list) --
The mount points for data volumes in your container.
(dict) --
Details for a volume mount point that's used in a container definition.
SourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
ContainerPath (string) --
The path on the container to mount the host volume at.
Privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user).
Compliance (dict) --
This data type is exclusive to findings that are generated as the result of a check run against a specific rule in a supported security standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
Status (string) --
The result of a standards check.
The valid values for Status are as follows.
PASSED - Standards check passed for all evaluated resources.WARNING - Some information is missing or this check is not supported for your configuration.FAILED - Standards check failed for at least one evaluated resource.NOT_AVAILABLE - Check could not be performed due to a service outage, API error, or because the result of the Config evaluation was NOT_APPLICABLE . If the Config evaluation result was NOT_APPLICABLE , then after 3 days, Security Hub automatically archives the finding.RelatedRequirements (list) --
For a control, the industry or regulatory framework requirements that are related to the control. The check for that control is aligned with these requirements.
StatusReasons (list) --
For findings generated from controls, a list of reasons behind the value of Status . For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
(dict) --
Provides additional context for the value of Compliance.Status .
ReasonCode (string) --
A code that represents a reason for the control status. For the list of status reason codes and their meanings, see Standards-related information in the ASFF in the Security Hub User Guide .
Description (string) --
The corresponding description for the status reason code.
VerificationState (string) --
Indicates the veracity of a finding.
WorkflowState (string) --
The workflow state of a finding.
Workflow (dict) --
Provides information about the status of the investigation into a finding.
Status (string) --
The status of the investigation into the finding. The workflow status is specific to an individual finding. It does not affect the generation of new findings. For example, setting the workflow status to SUPPRESSED or RESOLVED does not prevent a new finding for the same issue.
The allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .ComplianceStatus changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that you notified the resource owner about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner.SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The finding is no longer updated.RESOLVED - The finding was reviewed and remediated and is now considered resolved.RecordState (string) --
The record state of a finding.
RelatedFindings (list) --
A list of related findings.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Note (dict) --
A user-defined note added to a finding.
Text (string) --
The text of a note.
UpdatedBy (string) --
The principal that created a note.
UpdatedAt (string) --
The timestamp of when the note was updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
Vulnerabilities (list) --
Provides a list of vulnerabilities associated with the findings.
(dict) --
A vulnerability associated with a finding.
Id (string) --
The identifier of the vulnerability.
VulnerablePackages (list) --
List of software packages that have the vulnerability.
(dict) --
Information about a software package.
Name (string) --
The name of the software package.
Version (string) --
The version of the software package.
Epoch (string) --
The epoch of the software package.
Release (string) --
The release of the software package.
Architecture (string) --
The architecture used for the software package.
PackageManager (string) --
The source of the package.
FilePath (string) --
The file system path to the package manager inventory file.
Cvss (list) --
CVSS scores from the advisory related to the vulnerability.
(dict) --
CVSS scores from the advisory related to the vulnerability.
Version (string) --
The version of CVSS for the CVSS score.
BaseScore (float) --
The base CVSS score.
BaseVector (string) --
The base scoring vector for the CVSS score.
Source (string) --
The origin of the original CVSS score and vector.
Adjustments (list) --
Adjustments to the CVSS metrics.
(dict) --
An adjustment to the CVSS metric.
Metric (string) --
The metric to adjust.
Reason (string) --
The reason for the adjustment.
RelatedVulnerabilities (list) --
List of vulnerabilities that are related to this vulnerability.
Vendor (dict) --
Information about the vendor that generates the vulnerability report.
Name (string) --
The name of the vendor.
Url (string) --
The URL of the vulnerability advisory.
VendorSeverity (string) --
The severity that the vendor assigned to the vulnerability.
VendorCreatedAt (string) --
Indicates when the vulnerability advisory was created.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
VendorUpdatedAt (string) --
Indicates when the vulnerability advisory was last updated.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
ReferenceUrls (list) --
A list of URLs that provide additional information about the vulnerability.
PatchSummary (dict) --
Provides an overview of the patch compliance status for an instance against a selected compliance standard.
Id (string) --
The identifier of the compliance standard that was used to determine the patch compliance status.
InstalledCount (integer) --
The number of patches from the compliance standard that were installed successfully.
MissingCount (integer) --
The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.
FailedCount (integer) --
The number of patches from the compliance standard that failed to install.
InstalledOtherCount (integer) --
The number of installed patches that are not part of the compliance standard.
InstalledRejectedCount (integer) --
The number of patches that are installed but are also on a list of patches that the customer rejected.
InstalledPendingReboot (integer) --
The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.
OperationStartTime (string) --
Indicates when the operation started.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
OperationEndTime (string) --
Indicates when the operation completed.
Uses the date-time format specified in RFC 3339 section 5.6, Internet Date/Time Format . The value cannot contain spaces. For example, 2020-03-22T13:22:13.933Z .
RebootOption (string) --
The reboot option specified for the instance.
Operation (string) --
The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL .
Action (dict) --
Provides details about an action that affects or that was taken on a resource.
ActionType (string) --
The type of action that was detected. The possible action types are:
NETWORK_CONNECTIONAWS_API_CALLDNS_REQUESTPORT_PROBENetworkConnectionAction (dict) --
Included if ActionType is NETWORK_CONNECTION . Provides details about the network connection that was detected.
ConnectionDirection (string) --
The direction of the network connection request (IN or OUT ).
RemoteIpDetails (dict) --
Information about the remote IP address that issued the network connection request.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
RemotePortDetails (dict) --
Information about the port on the remote IP address.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the remote connection.
LocalPortDetails (dict) --
Information about the port on the EC2 instance.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the local connection.
Protocol (string) --
The protocol used to make the network connection request.
Blocked (boolean) --
Indicates whether the network connection attempt was blocked.
AwsApiCallAction (dict) --
Included if ActionType is AWS_API_CALL . Provides details about the API call that was detected.
Api (string) --
The name of the API method that was issued.
ServiceName (string) --
The name of the Amazon Web Services service that the API method belongs to.
CallerType (string) --
Indicates whether the API call originated from a remote IP address (remoteip ) or from a DNS domain (domain ).
RemoteIpDetails (dict) --
Provided if CallerType is remoteIp . Provides information about the remote IP address that the API call originated from.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
DomainDetails (dict) --
Provided if CallerType is domain . Provides information about the DNS domain that the API call originated from.
Domain (string) --
The name of the DNS domain that issued the API call.
AffectedResources (dict) --
Identifies the resources that were affected by the API call.
FirstSeen (string) --
An ISO8601-formatted timestamp that indicates when the API call was first observed.
LastSeen (string) --
An ISO8601-formatted timestamp that indicates when the API call was most recently observed.
DnsRequestAction (dict) --
Included if ActionType is DNS_REQUEST . Provides details about the DNS request that was detected.
Domain (string) --
The DNS domain that is associated with the DNS request.
Protocol (string) --
The protocol that was used for the DNS request.
Blocked (boolean) --
Indicates whether the DNS request was blocked.
PortProbeAction (dict) --
Included if ActionType is PORT_PROBE . Provides details about the port probe that was detected.
PortProbeDetails (list) --
Information about the ports affected by the port probe.
(dict) --
A port scan that was part of the port probe. For each scan, PortProbeDetails provides information about the local IP address and port that were scanned, and the remote IP address that the scan originated from.
LocalPortDetails (dict) --
Provides information about the port that was scanned.
Port (integer) --
The number of the port.
PortName (string) --
The port name of the local connection.
LocalIpDetails (dict) --
Provides information about the IP address where the scanned port is located.
IpAddressV4 (string) --
The IP address.
RemoteIpDetails (dict) --
Provides information about the remote IP address that performed the scan.
IpAddressV4 (string) --
The IP address.
Organization (dict) --
The internet service provider (ISP) organization associated with the remote IP address.
Asn (integer) --
The Autonomous System Number (ASN) of the internet provider
AsnOrg (string) --
The name of the organization that registered the ASN.
Isp (string) --
The ISP information for the internet provider.
Org (string) --
The name of the internet provider.
Country (dict) --
The country where the remote IP address is located.
CountryCode (string) --
The 2-letter ISO 3166 country code for the country.
CountryName (string) --
The name of the country.
City (dict) --
The city where the remote IP address is located.
CityName (string) --
The name of the city.
GeoLocation (dict) --
The coordinates of the location of the remote IP address.
Lon (float) --
The longitude of the location.
Lat (float) --
The latitude of the location.
Blocked (boolean) --
Indicates whether the port probe was blocked.
FindingProviderFields (dict) --
In a BatchImportFindings request, finding providers use FindingProviderFields to provide and update their own values for confidence, criticality, related findings, severity, and types.
Confidence (integer) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
Criticality (integer) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
RelatedFindings (list) --
A list of findings that are related to the current finding.
(dict) --
Details about a related finding.
ProductArn (string) --
The ARN of the product that generated a related finding.
Id (string) --
The product-generated identifier for a related finding.
Severity (dict) --
The severity of a finding.
Label (string) --
The severity label assigned to the finding by the finding provider.
Original (string) --
The finding provider's original value for the severity.
Types (list) --
One or more finding types in the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
Sample (boolean) --
Indicates whether the finding is a sample finding.
SecurityHub.Paginator.GetInsights¶paginator = client.get_paginator('get_insights')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.get_insights().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
InsightArns=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The ARNs of the insights to describe. If you do not provide any insight ARNs, then GetInsights returns all of your custom insights. It does not return any managed insights.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Insights': [
{
'InsightArn': 'string',
'Name': 'string',
'Filters': {
'ProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'AwsAccountId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Id': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'GeneratorId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Region': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Type': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FirstObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'LastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'CreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'UpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'SeverityProduct': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityNormalized': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'SeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Confidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Criticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'Title': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Description': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecommendationText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'SourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProductFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ProductName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'CompanyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'UserDefinedFields': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'MalwareName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwarePath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'MalwareState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDirection': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkProtocol': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceIpV4': [
{
'Cidr': 'string'
},
],
'NetworkSourceIpV6': [
{
'Cidr': 'string'
},
],
'NetworkSourcePort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkSourceDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkSourceMac': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NetworkDestinationIpV4': [
{
'Cidr': 'string'
},
],
'NetworkDestinationIpV6': [
{
'Cidr': 'string'
},
],
'NetworkDestinationPort': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'NetworkDestinationDomain': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPath': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ProcessPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessParentPid': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'ProcessLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ProcessTerminatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorValue': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorCategory': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorLastObservedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ThreatIntelIndicatorSource': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ThreatIntelIndicatorSourceUrl': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourcePartition': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceRegion': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceType': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIpV4Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceIpV6Addresses': [
{
'Cidr': 'string'
},
],
'ResourceAwsEc2InstanceKeyName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceIamInstanceProfileArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceVpcId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceSubnetId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsEc2InstanceLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsS3BucketOwnerId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsS3BucketOwnerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyPrincipalName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceAwsIamAccessKeyCreatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceAwsIamUserUserName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerImageName': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'ResourceContainerLaunchedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'ResourceDetailsOther': [
{
'Key': 'string',
'Value': 'string',
'Comparison': 'EQUALS'|'NOT_EQUALS'
},
],
'ComplianceStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'VerificationState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'WorkflowStatus': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RecordState': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'RelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteText': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'NoteUpdatedAt': [
{
'Start': 'string',
'End': 'string',
'DateRange': {
'Value': 123,
'Unit': 'DAYS'
}
},
],
'NoteUpdatedBy': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Keyword': [
{
'Value': 'string'
},
],
'FindingProviderFieldsConfidence': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsCriticality': [
{
'Gte': 123.0,
'Lte': 123.0,
'Eq': 123.0
},
],
'FindingProviderFieldsRelatedFindingsId': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsRelatedFindingsProductArn': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityLabel': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsSeverityOriginal': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'FindingProviderFieldsTypes': [
{
'Value': 'string',
'Comparison': 'EQUALS'|'PREFIX'|'NOT_EQUALS'|'PREFIX_NOT_EQUALS'
},
],
'Sample': [
{
'Value': True|False
},
]
},
'GroupByAttribute': 'string'
},
],
}
Response Structure
(dict) --
Insights (list) --
The insights returned by the operation.
(dict) --
Contains information about a Security Hub insight.
InsightArn (string) --
The ARN of a Security Hub insight.
Name (string) --
The name of a Security Hub insight.
Filters (dict) --
One or more attributes used to filter the findings included in the insight. The insight only includes findings that match the criteria defined in the filters.
ProductArn (list) --
The ARN generated by Security Hub that uniquely identifies a third-party company (security findings provider) after this provider's product (solution that generates findings) is registered with Security Hub.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceAwsAccountId (list) --
The Amazon Web Services account ID that a finding is generated in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceId (list) --
The security findings provider-specific identifier for a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceGeneratorId (list) --
The identifier for the solution-specific component (a discrete unit of logic) that generated a finding. In various security-findings providers' solutions, this generator can be called a rule, a check, a detector, a plugin, etc.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRegion (list) --
The Region from which the finding was generated.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceType (list) --
A finding type in the format of namespace/category/classifier that classifies a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFirstObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider first observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
LastObservedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider most recently observed the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
CreatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider captured the potential security issue that a finding captured.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
UpdatedAt (list) --
An ISO8601-formatted timestamp that indicates when the security-findings provider last updated the finding record.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
SeverityProduct (list) --
The native severity as defined by the security-findings provider's solution that generated the finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityNormalized (list) --
The normalized severity of a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
SeverityLabel (list) --
The label of a finding's severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceConfidence (list) --
A finding's confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Criticality (list) --
The level of importance assigned to the resources associated with the finding.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
Title (list) --
A finding's title.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceDescription (list) --
A finding's description.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRecommendationText (list) --
The recommendation of what to do about the issue described in a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSourceUrl (list) --
A URL that links to a page about the current finding in the security-findings provider's solution.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProductFields (list) --
A data type where security-findings providers can include additional solution-specific details that aren't part of the defined AwsSecurityFinding format.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ProductName (list) --
The name of the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceCompanyName (list) --
The name of the findings provider (company) that owns the solution (product) that generates findings.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceUserDefinedFields (list) --
A list of name/value string pairs associated with the finding. These are custom, user-defined fields added to a finding.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
MalwareName (list) --
The name of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwareType (list) --
The type of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwarePath (list) --
The filesystem path of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceMalwareState (list) --
The state of the malware that was observed.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkDirection (list) --
Indicates the direction of network traffic associated with a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkProtocol (list) --
The protocol of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkSourceIpV4 (list) --
The source IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourceIpV6 (list) --
The source IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkSourcePort (list) --
The source port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkSourceDomain (list) --
The source domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkSourceMac (list) --
The source media access control (MAC) address of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNetworkDestinationIpV4 (list) --
The destination IPv4 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationIpV6 (list) --
The destination IPv6 address of network-related information about a finding.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
NetworkDestinationPort (list) --
The destination port of network-related information about a finding.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
NetworkDestinationDomain (list) --
The destination domain of network-related information about a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessName (list) --
The name of the process.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessPath (list) --
The path to the process executable.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceProcessPid (list) --
The process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessParentPid (list) --
The parent process ID.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
ProcessLaunchedAt (list) --
The date/time that the process was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ProcessTerminatedAt (list) --
The date/time that the process was terminated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorType (list) --
The type of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorValue (list) --
The value of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorCategory (list) --
The category of a threat intelligence indicator.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorLastObservedAt (list) --
The date/time of the last observation of a threat intelligence indicator.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ThreatIntelIndicatorSource (list) --
The source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceThreatIntelIndicatorSourceUrl (list) --
The URL for more details from the source of the threat intelligence.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceType (list) --
Specifies the type of the resource that details are provided for.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceId (list) --
The canonical identifier for the given resource type.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourcePartition (list) --
The canonical Amazon Web Services partition name that the Region is assigned to.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceRegion (list) --
The canonical Amazon Web Services external Region name where this resource is located.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceTags (list) --
A list of Amazon Web Services tags associated with a resource at the time the finding was processed.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ResourceAwsEc2InstanceType (list) --
The instance type of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceImageId (list) --
The Amazon Machine Image (AMI) ID of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceIpV4Addresses (list) --
The IPv4 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceIpV6Addresses (list) --
The IPv6 addresses associated with the instance.
(dict) --
The IP filter for querying findings.
Cidr (string) --
A finding's CIDR value.
ResourceAwsEc2InstanceKeyName (list) --
The key name associated with the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceIamInstanceProfileArn (list) --
The IAM profile ARN of the instance.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceVpcId (list) --
The identifier of the VPC that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceSubnetId (list) --
The identifier of the subnet that the instance was launched in.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsEc2InstanceLaunchedAt (list) --
The date and time the instance was launched.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsS3BucketOwnerId (list) --
The canonical user ID of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsS3BucketOwnerName (list) --
The display name of the owner of the S3 bucket.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyUserName (list) --
The user associated with the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyPrincipalName (list) --
The name of the principal that is associated with an IAM access key.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyStatus (list) --
The status of the IAM access key related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceAwsIamAccessKeyCreatedAt (list) --
The creation date/time of the IAM access key related to a finding.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceAwsIamUserUserName (list) --
The name of an IAM user.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerName (list) --
The name of the container related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerImageId (list) --
The identifier of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerImageName (list) --
The name of the image related to a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceResourceContainerLaunchedAt (list) --
The date/time that the container was started.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
ResourceDetailsOther (list) --
The details of a resource that doesn't have a specific subfield for the resource type defined.
(dict) --
A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.
Key (string) --
The key of the map filter. For example, for ResourceTags , Key identifies the name of the tag. For UserDefinedFields , Key is the name of the field.
Value (string) --
The value for the key in the map filter. Filter values are case sensitive. For example, one of the values for a tag called Department might be Security . If you provide security as the filter value, then there is no match.
Comparison (string) --
The condition to apply to the key value when querying for findings with a map filter.
To search for values that exactly match the filter value, use EQUALS . For example, for the ResourceTags field, the filter Department EQUALS Security matches findings that have the value Security for the tag Department .
To search for values other than the filter value, use NOT_EQUALS . For example, for the ResourceTags field, the filter Department NOT_EQUALS Finance matches findings that do not have the value Finance for the tag Department .
EQUALSfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
You cannot have both an EQUALS filter and a NOT_EQUALS filter on the same field.
ComplianceStatus (list) --
Exclusive to findings that are generated as the result of a check run against a specific rule in a supported standard, such as CIS Amazon Web Services Foundations. Contains security standard-related finding details.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceVerificationState (list) --
The veracity of a finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceWorkflowState (list) --
The workflow state of a finding.
Note that this field is deprecated. To search for a finding based on its workflow status, use WorkflowStatus .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceWorkflowStatus (list) --
The status of the investigation into a finding. Allowed values are the following.
NEW - The initial state of a finding, before it is reviewed. Security Hub also resets the workflow status from NOTIFIED or RESOLVED to NEW in the following cases:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to either WARNING , FAILED , or NOT_AVAILABLE .NOTIFIED - Indicates that the resource owner has been notified about the security issue. Used when the initial reviewer is not the resource owner, and needs intervention from the resource owner. If one of the following occurs, the workflow status is changed automatically from NOTIFIED to NEW :RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .SUPPRESSED - Indicates that you reviewed the finding and do not believe that any action is needed. The workflow status of a SUPPRESSED finding does not change if RecordState changes from ARCHIVED to ACTIVE .RESOLVED - The finding was reviewed and remediated and is now considered resolved. The finding remains RESOLVED unless one of the following occurs:RecordState changes from ARCHIVED to ACTIVE .Compliance.Status changes from PASSED to FAILED , WARNING , or NOT_AVAILABLE .In those cases, the workflow status is automatically reset to NEW .
For findings from controls, if Compliance.Status is PASSED , then Security Hub automatically sets the workflow status to RESOLVED .
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRecordState (list) --
The updated record state for the finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceRelatedFindingsId (list) --
The solution-generated identifier for a related finding.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNoteText (list) --
The text of a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceNoteUpdatedAt (list) --
The timestamp of when the note was updated.
(dict) --
A date filter for querying findings.
Start (string) --
A start date for the date filter.
End (string) --
An end date for the date filter.
DateRange (dict) --
A date range for the date filter.
Value (integer) --
A date range value for the date filter.
Unit (string) --
A date range unit for the date filter.
NoteUpdatedBy (list) --
The principal that created a note.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceKeyword (list) --
A keyword for a finding.
(dict) --
A keyword filter for querying findings.
Value (string) --
A value for the keyword.
FindingProviderFieldsConfidence (list) --
The finding provider value for the finding confidence. Confidence is defined as the likelihood that a finding accurately identifies the behavior or issue that it was intended to identify.
Confidence is scored on a 0-100 basis using a ratio scale, where 0 means zero percent confidence and 100 means 100 percent confidence.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
FindingProviderFieldsCriticality (list) --
The finding provider value for the level of importance assigned to the resources associated with the findings.
A score of 0 means that the underlying resources have no criticality, and a score of 100 is reserved for the most critical resources.
(dict) --
A number filter for querying findings.
Gte (float) --
The greater-than-equal condition to be applied to a single field when querying for findings.
Lte (float) --
The less-than-equal condition to be applied to a single field when querying for findings.
Eq (float) --
The equal-to condition to be applied to a single field when querying for findings.
FindingProviderFieldsRelatedFindingsId (list) --
The finding identifier of a related finding that is identified by the finding provider.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsRelatedFindingsProductArn (list) --
The ARN of the solution that generated a related finding that is identified by the finding provider.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsSeverityLabel (list) --
The finding provider value for the severity label.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsSeverityOriginal (list) --
The finding provider's original value for the severity.
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceFindingProviderFieldsTypes (list) --
One or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding.
Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
(dict) --
A string filter for querying findings.
Value (string) --
The string filter value. Filter values are case sensitive. For example, the product name for control-based findings is Security Hub . If you provide security hub as the filter text, then there is no match.
Comparison (string) --
The condition to apply to a string value when querying for findings. To search for values that contain the filter criteria value, use one of the following comparison operators:
EQUALS . For example, the filter ResourceType EQUALS AwsEc2SecurityGroup only matches findings that have a resource type of AwsEc2SecurityGroup .PREFIX . For example, the filter ResourceType PREFIX AwsIam matches findings that have a resource type that starts with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all match.
EQUALSandPREFIXfilters on the same field are joined byOR. A finding matches if it matches any one of those filters.
To search for values that do not contain the filter criteria value, use one of the following comparison operators:
NOT_EQUALS . For example, the filter ResourceType NOT_EQUALS AwsIamPolicy matches findings that have a resource type other than AwsIamPolicy .PREFIX_NOT_EQUALS . For example, the filter ResourceType PREFIX_NOT_EQUALS AwsIam matches findings that have a resource type that does not start with AwsIam . Findings with a resource type of AwsIamPolicy , AwsIamRole , or AwsIamUser would all be excluded from the results.
NOT_EQUALSandPREFIX_NOT_EQUALSfilters on the same field are joined byAND. A finding matches only if it matches all of those filters.
For filters on the same field, you cannot provide both an EQUALS filter and a NOT_EQUALS or PREFIX_NOT_EQUALS filter. Combining filters in this way always returns an error, even if the provided filter values would return valid results.
You can combine PREFIX filters with NOT_EQUALS or PREFIX_NOT_EQUALS filters for the same field. Security Hub first processes the PREFIX filters, then the NOT_EQUALS or PREFIX_NOT_EQUALS filters.
For example, for the following filter, Security Hub first identifies findings that have resource types that start with either AwsIAM or AwsEc2 . It then excludes findings that have a resource type of AwsIamPolicy and findings that have a resource type of AwsEc2NetworkInterface .
ResourceType PREFIX AwsIamResourceType PREFIX AwsEc2ResourceType NOT_EQUALS AwsIamPolicyResourceType NOT_EQUALS AwsEc2NetworkInterfaceSample (list) --
Indicates whether or not sample findings are included in the filter results.
(dict) --
Boolean filter for querying findings.
Value (boolean) --
The value of the boolean.
GroupByAttribute (string) --
The grouping attribute for the insight's findings. Indicates how to group the matching findings, and identifies the type of item that the insight applies to. For example, if an insight is grouped by resource identifier, then the insight produces a list of resource identifiers.
SecurityHub.Paginator.ListEnabledProductsForImport¶paginator = client.get_paginator('list_enabled_products_for_import')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.list_enabled_products_for_import().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'ProductSubscriptions': [
'string',
],
}
Response Structure
The list of ARNs for the resources that represent your subscriptions to products.
SecurityHub.Paginator.ListFindingAggregators¶paginator = client.get_paginator('list_finding_aggregators')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.list_finding_aggregators().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'FindingAggregators': [
{
'FindingAggregatorArn': 'string'
},
],
}
Response Structure
The list of finding aggregators. This operation currently only returns a single result.
A finding aggregator. A finding aggregator contains the configuration for finding aggregation.
The ARN of the finding aggregator. You use the finding aggregator ARN to retrieve details for, update, and delete the finding aggregator.
SecurityHub.Paginator.ListInvitations¶paginator = client.get_paginator('list_invitations')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.list_invitations().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'Invitations': [
{
'AccountId': 'string',
'InvitationId': 'string',
'InvitedAt': datetime(2015, 1, 1),
'MemberStatus': 'string'
},
],
}
Response Structure
The details of the invitations returned by the operation.
Details about an invitation.
The account ID of the Security Hub administrator account that the invitation was sent from.
The ID of the invitation sent to the member account.
The timestamp of when the invitation was sent.
The current status of the association between the member and administrator accounts.
SecurityHub.Paginator.ListMembers¶paginator = client.get_paginator('list_members')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.list_members().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
OnlyAssociated=True|False,
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
Specifies which member accounts to include in the response based on their relationship status with the administrator account. The default value is TRUE .
If OnlyAssociated is set to TRUE , the response includes member accounts whose relationship status with the administrator account is set to ENABLED .
If OnlyAssociated is set to FALSE , the response includes all existing member accounts.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Members': [
{
'AccountId': 'string',
'Email': 'string',
'MasterId': 'string',
'AdministratorId': 'string',
'MemberStatus': 'string',
'InvitedAt': datetime(2015, 1, 1),
'UpdatedAt': datetime(2015, 1, 1)
},
],
}
Response Structure
(dict) --
Members (list) --
Member details returned by the operation.
(dict) --
The details about a member account.
AccountId (string) --
The Amazon Web Services account ID of the member account.
Email (string) --
The email address of the member account.
MasterId (string) --
This is replaced by AdministratorID .
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
AdministratorId (string) --
The Amazon Web Services account ID of the Security Hub administrator account associated with this member account.
MemberStatus (string) --
The status of the relationship between the member account and its administrator account.
The status can have one of the following values:
CREATED - Indicates that the administrator account added the member account, but has not yet invited the member account.INVITED - Indicates that the administrator account invited the member account. The member account has not yet responded to the invitation.ENABLED - Indicates that the member account is currently active. For manually invited member accounts, indicates that the member account accepted the invitation.REMOVED - Indicates that the administrator account disassociated the member account.RESIGNED - Indicates that the member account disassociated themselves from the administrator account.DELETED - Indicates that the administrator account deleted the member account.ACCOUNT_SUSPENDED - Indicates that an organization account was suspended from Amazon Web Services at the same time that the administrator account tried to enable the organization account as a member account.InvitedAt (datetime) --
A timestamp for the date and time when the invitation was sent to the member account.
UpdatedAt (datetime) --
The timestamp for the date and time when the member account was updated.
SecurityHub.Paginator.ListOrganizationAdminAccounts¶paginator = client.get_paginator('list_organization_admin_accounts')
paginate(**kwargs)¶Creates an iterator that will paginate through responses from SecurityHub.Client.list_organization_admin_accounts().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'AdminAccounts': [
{
'AccountId': 'string',
'Status': 'ENABLED'|'DISABLE_IN_PROGRESS'
},
],
}
Response Structure
The list of Security Hub administrator accounts.
Represents a Security Hub administrator account designated by an organization management account.
The Amazon Web Services account identifier of the Security Hub administrator account.
The current status of the Security Hub administrator account. Indicates whether the account is currently enabled as a Security Hub administrator.