RDS / Client / delete_db_instance

delete_db_instance#

RDS.Client.delete_db_instance(**kwargs)#

The DeleteDBInstance action deletes a previously provisioned DB instance. When you delete a DB instance, all automated backups for that instance are deleted and can’t be recovered. Manual DB snapshots of the DB instance to be deleted by DeleteDBInstance are not deleted.

If you request a final DB snapshot the status of the Amazon RDS DB instance is deleting until the DB snapshot is created. The API action DescribeDBInstance is used to monitor the status of this operation. The action can’t be canceled or reverted once submitted.

When a DB instance is in a failure state and has a status of failed, incompatible-restore, or incompatible-network, you can only delete it when you skip creation of the final snapshot with the SkipFinalSnapshot parameter.

If the specified DB instance is part of an Amazon Aurora DB cluster, you can’t delete the DB instance if both of the following conditions are true:

The DB cluster is a read replica of another Amazon Aurora DB cluster.
The DB instance is the only instance in the DB cluster.

To delete a DB instance in this case, first call the PromoteReadReplicaDBCluster API action to promote the DB cluster so it’s no longer a read replica. After the promotion completes, then call the DeleteDBInstance API action to delete the final instance in the DB cluster.

See also: AWS API Documentation

Request Syntax

response = client.delete_db_instance(
    DBInstanceIdentifier='string',
    SkipFinalSnapshot=True|False,
    FinalDBSnapshotIdentifier='string',
    DeleteAutomatedBackups=True|False
)

Parameters:

DBInstanceIdentifier (string) –
[REQUIRED]

The DB instance identifier for the DB instance to be deleted. This parameter isn’t case-sensitive.

Constraints:
- Must match the name of an existing DB instance.
SkipFinalSnapshot (boolean) –
A value that indicates whether to skip the creation of a final DB snapshot before deleting the instance. If you enable this parameter, RDS doesn’t create a DB snapshot. If you don’t enable this parameter, RDS creates a DB snapshot before the DB instance is deleted. By default, skip isn’t enabled, and the DB snapshot is created.

Note

If you don’t enable this parameter, you must specify the FinalDBSnapshotIdentifier parameter.

When a DB instance is in a failure state and has a status of failed, incompatible-restore, or incompatible-network, RDS can delete the instance only if you enable this parameter.

If you delete a read replica or an RDS Custom instance, you must enable this setting.

This setting is required for RDS Custom.
FinalDBSnapshotIdentifier (string) –
The DBSnapshotIdentifier of the new DBSnapshot created when the SkipFinalSnapshot parameter is disabled.

Note

If you enable this parameter and also enable SkipFinalShapshot, the command results in an error.

This setting doesn’t apply to RDS Custom.

Constraints:
- Must be 1 to 255 letters or numbers.
- First character must be a letter.
- Can’t end with a hyphen or contain two consecutive hyphens.
- Can’t be specified when deleting a read replica.
DeleteAutomatedBackups (boolean) – A value that indicates whether to remove automated backups immediately after the DB instance is deleted. This parameter isn’t case-sensitive. The default is to remove automated backups immediately after the DB instance is deleted.

Return type:

dict

Returns:

Response Syntax

{
    'DBInstance': {
        'DBInstanceIdentifier': 'string',
        'DBInstanceClass': 'string',
        'Engine': 'string',
        'DBInstanceStatus': 'string',
        'AutomaticRestartTime': datetime(2015, 1, 1),
        'MasterUsername': 'string',
        'DBName': 'string',
        'Endpoint': {
            'Address': 'string',
            'Port': 123,
            'HostedZoneId': 'string'
        },
        'AllocatedStorage': 123,
        'InstanceCreateTime': datetime(2015, 1, 1),
        'PreferredBackupWindow': 'string',
        'BackupRetentionPeriod': 123,
        'DBSecurityGroups': [
            {
                'DBSecurityGroupName': 'string',
                'Status': 'string'
            },
        ],
        'VpcSecurityGroups': [
            {
                'VpcSecurityGroupId': 'string',
                'Status': 'string'
            },
        ],
        'DBParameterGroups': [
            {
                'DBParameterGroupName': 'string',
                'ParameterApplyStatus': 'string'
            },
        ],
        'AvailabilityZone': 'string',
        'DBSubnetGroup': {
            'DBSubnetGroupName': 'string',
            'DBSubnetGroupDescription': 'string',
            'VpcId': 'string',
            'SubnetGroupStatus': 'string',
            'Subnets': [
                {
                    'SubnetIdentifier': 'string',
                    'SubnetAvailabilityZone': {
                        'Name': 'string'
                    },
                    'SubnetOutpost': {
                        'Arn': 'string'
                    },
                    'SubnetStatus': 'string'
                },
            ],
            'DBSubnetGroupArn': 'string',
            'SupportedNetworkTypes': [
                'string',
            ]
        },
        'PreferredMaintenanceWindow': 'string',
        'PendingModifiedValues': {
            'DBInstanceClass': 'string',
            'AllocatedStorage': 123,
            'MasterUserPassword': 'string',
            'Port': 123,
            'BackupRetentionPeriod': 123,
            'MultiAZ': True|False,
            'EngineVersion': 'string',
            'LicenseModel': 'string',
            'Iops': 123,
            'DBInstanceIdentifier': 'string',
            'StorageType': 'string',
            'CACertificateIdentifier': 'string',
            'DBSubnetGroupName': 'string',
            'PendingCloudwatchLogsExports': {
                'LogTypesToEnable': [
                    'string',
                ],
                'LogTypesToDisable': [
                    'string',
                ]
            },
            'ProcessorFeatures': [
                {
                    'Name': 'string',
                    'Value': 'string'
                },
            ],
            'IAMDatabaseAuthenticationEnabled': True|False,
            'AutomationMode': 'full'|'all-paused',
            'ResumeFullAutomationModeTime': datetime(2015, 1, 1),
            'StorageThroughput': 123
        },
        'LatestRestorableTime': datetime(2015, 1, 1),
        'MultiAZ': True|False,
        'EngineVersion': 'string',
        'AutoMinorVersionUpgrade': True|False,
        'ReadReplicaSourceDBInstanceIdentifier': 'string',
        'ReadReplicaDBInstanceIdentifiers': [
            'string',
        ],
        'ReadReplicaDBClusterIdentifiers': [
            'string',
        ],
        'ReplicaMode': 'open-read-only'|'mounted',
        'LicenseModel': 'string',
        'Iops': 123,
        'OptionGroupMemberships': [
            {
                'OptionGroupName': 'string',
                'Status': 'string'
            },
        ],
        'CharacterSetName': 'string',
        'NcharCharacterSetName': 'string',
        'SecondaryAvailabilityZone': 'string',
        'PubliclyAccessible': True|False,
        'StatusInfos': [
            {
                'StatusType': 'string',
                'Normal': True|False,
                'Status': 'string',
                'Message': 'string'
            },
        ],
        'StorageType': 'string',
        'TdeCredentialArn': 'string',
        'DbInstancePort': 123,
        'DBClusterIdentifier': 'string',
        'StorageEncrypted': True|False,
        'KmsKeyId': 'string',
        'DbiResourceId': 'string',
        'CACertificateIdentifier': 'string',
        'DomainMemberships': [
            {
                'Domain': 'string',
                'Status': 'string',
                'FQDN': 'string',
                'IAMRoleName': 'string'
            },
        ],
        'CopyTagsToSnapshot': True|False,
        'MonitoringInterval': 123,
        'EnhancedMonitoringResourceArn': 'string',
        'MonitoringRoleArn': 'string',
        'PromotionTier': 123,
        'DBInstanceArn': 'string',
        'Timezone': 'string',
        'IAMDatabaseAuthenticationEnabled': True|False,
        'PerformanceInsightsEnabled': True|False,
        'PerformanceInsightsKMSKeyId': 'string',
        'PerformanceInsightsRetentionPeriod': 123,
        'EnabledCloudwatchLogsExports': [
            'string',
        ],
        'ProcessorFeatures': [
            {
                'Name': 'string',
                'Value': 'string'
            },
        ],
        'DeletionProtection': True|False,
        'AssociatedRoles': [
            {
                'RoleArn': 'string',
                'FeatureName': 'string',
                'Status': 'string'
            },
        ],
        'ListenerEndpoint': {
            'Address': 'string',
            'Port': 123,
            'HostedZoneId': 'string'
        },
        'MaxAllocatedStorage': 123,
        'TagList': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'DBInstanceAutomatedBackupsReplications': [
            {
                'DBInstanceAutomatedBackupsArn': 'string'
            },
        ],
        'CustomerOwnedIpEnabled': True|False,
        'AwsBackupRecoveryPointArn': 'string',
        'ActivityStreamStatus': 'stopped'|'starting'|'started'|'stopping',
        'ActivityStreamKmsKeyId': 'string',
        'ActivityStreamKinesisStreamName': 'string',
        'ActivityStreamMode': 'sync'|'async',
        'ActivityStreamEngineNativeAuditFieldsIncluded': True|False,
        'AutomationMode': 'full'|'all-paused',
        'ResumeFullAutomationModeTime': datetime(2015, 1, 1),
        'CustomIamInstanceProfile': 'string',
        'BackupTarget': 'string',
        'NetworkType': 'string',
        'ActivityStreamPolicyStatus': 'locked'|'unlocked'|'locking-policy'|'unlocking-policy',
        'StorageThroughput': 123,
        'DBSystemId': 'string',
        'MasterUserSecret': {
            'SecretArn': 'string',
            'SecretStatus': 'string',
            'KmsKeyId': 'string'
        },
        'CertificateDetails': {
            'CAIdentifier': 'string',
            'ValidTill': datetime(2015, 1, 1)
        },
        'ReadReplicaSourceDBClusterIdentifier': 'string'
    }
}

Response Structure

(dict) –
- DBInstance (dict) –
  
  Contains the details of an Amazon RDS DB instance.
  
  This data type is used as a response element in the operations CreateDBInstance, CreateDBInstanceReadReplica, DeleteDBInstance, DescribeDBInstances, ModifyDBInstance, PromoteReadReplica, RebootDBInstance, RestoreDBInstanceFromDBSnapshot, RestoreDBInstanceFromS3, RestoreDBInstanceToPointInTime, StartDBInstance, and StopDBInstance.
  - DBInstanceIdentifier (string) –
    
    Contains a user-supplied database identifier. This identifier is the unique key that identifies a DB instance.
  - DBInstanceClass (string) –
    
    Contains the name of the compute and memory capacity class of the DB instance.
  - Engine (string) –
    
    The name of the database engine to be used for this DB instance.
  - DBInstanceStatus (string) –
    
    Specifies the current state of this database.
    
    For information about DB instance statuses, see Viewing DB instance status in the Amazon RDS User Guide.
  - AutomaticRestartTime (datetime) –
    
    The time when a stopped DB instance is restarted automatically.
  - MasterUsername (string) –
    
    Contains the master username for the DB instance.
  - DBName (string) –
    
    The meaning of this parameter differs according to the database engine you use.
    
    MySQL, MariaDB, SQL Server, PostgreSQL
    
    Contains the name of the initial database of this instance that was provided at create time, if one was specified when the DB instance was created. This same name is returned for the life of the DB instance.
    
    Type: String
    
    Oracle
    
    Contains the Oracle System ID (SID) of the created DB instance. Not shown when the returned parameters do not apply to an Oracle DB instance.
  - Endpoint (dict) –
    
    Specifies the connection endpoint.
    
    Note
    
    The endpoint might not be shown for instances whose status is creating.
    - Address (string) –
      
      Specifies the DNS address of the DB instance.
    - Port (integer) –
      
      Specifies the port that the database engine is listening on.
    - HostedZoneId (string) –
      
      Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
  - AllocatedStorage (integer) –
    
    Specifies the allocated storage size specified in gibibytes (GiB).
  - InstanceCreateTime (datetime) –
    
    Provides the date and time the DB instance was created.
  - PreferredBackupWindow (string) –
    
    Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.
  - BackupRetentionPeriod (integer) –
    
    Specifies the number of days for which automatic DB snapshots are retained.
  - DBSecurityGroups (list) –
    
    A list of DB security group elements containing DBSecurityGroup.Name and DBSecurityGroup.Status subelements.
    - (dict) –
      
      This data type is used as a response element in the following actions:
      - ModifyDBInstance
      - RebootDBInstance
      - RestoreDBInstanceFromDBSnapshot
      - RestoreDBInstanceToPointInTime
      - DBSecurityGroupName (string) –
        
        The name of the DB security group.
      - Status (string) –
        
        The status of the DB security group.
  - VpcSecurityGroups (list) –
    
    Provides a list of VPC security group elements that the DB instance belongs to.
    - (dict) –
      
      This data type is used as a response element for queries on VPC security group membership.
      - VpcSecurityGroupId (string) –
        
        The name of the VPC security group.
      - Status (string) –
        
        The membership status of the VPC security group.
        
        Currently, the only valid status is active.
  - DBParameterGroups (list) –
    
    Provides the list of DB parameter groups applied to this DB instance.
    - (dict) –
      
      The status of the DB parameter group.
      
      This data type is used as a response element in the following actions:
      - CreateDBInstance
      - CreateDBInstanceReadReplica
      - DeleteDBInstance
      - ModifyDBInstance
      - RebootDBInstance
      - RestoreDBInstanceFromDBSnapshot
      - DBParameterGroupName (string) –
        
        The name of the DB parameter group.
      - ParameterApplyStatus (string) –
        
        The status of parameter updates.
  - AvailabilityZone (string) –
    
    Specifies the name of the Availability Zone the DB instance is located in.
  - DBSubnetGroup (dict) –
    
    Specifies information on the subnet group associated with the DB instance, including the name, description, and subnets in the subnet group.
    - DBSubnetGroupName (string) –
      
      The name of the DB subnet group.
    - DBSubnetGroupDescription (string) –
      
      Provides the description of the DB subnet group.
    - VpcId (string) –
      
      Provides the VpcId of the DB subnet group.
    - SubnetGroupStatus (string) –
      
      Provides the status of the DB subnet group.
    - Subnets (list) –
      
      Contains a list of Subnet elements.
      - (dict) –
        
        This data type is used as a response element for the DescribeDBSubnetGroups operation.
        
        SubnetIdentifier (string) –
        
        The identifier of the subnet.
        
        SubnetAvailabilityZone (dict) –
        
        Contains Availability Zone information.
        
        This data type is used as an element in the OrderableDBInstanceOption data type.
        
        Name (string) –
        
        The name of the Availability Zone.
        
        SubnetOutpost (dict) –
        
        If the subnet is associated with an Outpost, this value specifies the Outpost.
        
        For more information about RDS on Outposts, see Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.
        
        Arn (string) –
        
        The Amazon Resource Name (ARN) of the Outpost.
        
        SubnetStatus (string) –
        
        The status of the subnet.
    - DBSubnetGroupArn (string) –
      
      The Amazon Resource Name (ARN) for the DB subnet group.
    - SupportedNetworkTypes (list) –
      
      The network type of the DB subnet group.
      
      Valid values:
      - IPV4
      - DUAL
      A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols ( DUAL).
      
      For more information, see Working with a DB instance in a VPC in the Amazon RDS User Guide.
      - (string) –
  - PreferredMaintenanceWindow (string) –
    
    Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
  - PendingModifiedValues (dict) –
    
    A value that specifies that changes to the DB instance are pending. This element is only included when changes are pending. Specific changes are identified by subelements.
    - DBInstanceClass (string) –
      
      The name of the compute and memory capacity class for the DB instance.
    - AllocatedStorage (integer) –
      
      The allocated storage size for the DB instance specified in gibibytes (GiB).
    - MasterUserPassword (string) –
      
      The master credentials for the DB instance.
    - Port (integer) –
      
      The port for the DB instance.
    - BackupRetentionPeriod (integer) –
      
      The number of days for which automated backups are retained.
    - MultiAZ (boolean) –
      
      A value that indicates that the Single-AZ DB instance will change to a Multi-AZ deployment.
    - EngineVersion (string) –
      
      The database engine version.
    - LicenseModel (string) –
      
      The license model for the DB instance.
      
      Valid values: license-included | bring-your-own-license | general-public-license
    - Iops (integer) –
      
      The Provisioned IOPS value for the DB instance.
    - DBInstanceIdentifier (string) –
      
      The database identifier for the DB instance.
    - StorageType (string) –
      
      The storage type of the DB instance.
    - CACertificateIdentifier (string) –
      
      The identifier of the CA certificate for the DB instance.
      
      For more information, see Using SSL/TLS to encrypt a connection to a DB instance in the Amazon RDS User Guide and Using SSL/TLS to encrypt a connection to a DB cluster in the Amazon Aurora User Guide.
    - DBSubnetGroupName (string) –
      
      The DB subnet group for the DB instance.
    - PendingCloudwatchLogsExports (dict) –
      
      A list of the log types whose configuration is still pending. In other words, these log types are in the process of being activated or deactivated.
      - LogTypesToEnable (list) –
        
        Log types that are in the process of being deactivated. After they are deactivated, these log types aren’t exported to CloudWatch Logs.
        
        (string) –
      - LogTypesToDisable (list) –
        
        Log types that are in the process of being enabled. After they are enabled, these log types are exported to CloudWatch Logs.
        
        (string) –
    - ProcessorFeatures (list) –
      
      The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
      - (dict) –
        
        Contains the processor features of a DB instance class.
        
        To specify the number of CPU cores, use the coreCount feature name for the Name parameter. To specify the number of threads per core, use the threadsPerCore feature name for the Name parameter.
        
        You can set the processor features of the DB instance class for a DB instance when you call one of the following actions:
        
        CreateDBInstance
        
        ModifyDBInstance
        
        RestoreDBInstanceFromDBSnapshot
        
        RestoreDBInstanceFromS3
        
        RestoreDBInstanceToPointInTime
        
        You can view the valid processor values for a particular instance class by calling the DescribeOrderableDBInstanceOptions action and specifying the instance class for the DBInstanceClass parameter.
        
        In addition, you can use the following actions for DB instance class processor information:
        
        DescribeDBInstances
        
        DescribeDBSnapshots
        
        DescribeValidDBInstanceModifications
        
        If you call DescribeDBInstances, ProcessorFeature returns non-null values only if the following conditions are met:
        
        You are accessing an Oracle DB instance.
        
        Your Oracle DB instance class supports configuring the number of CPU cores and threads per core.
        
        The current number CPU cores and threads is set to a non-default value.
        
        For more information, see Configuring the Processor of the DB Instance Class in the Amazon RDS User Guide.
        
        Name (string) –
        
        The name of the processor feature. Valid names are coreCount and threadsPerCore.
        
        Value (string) –
        
        The value of a processor feature name.
    - IAMDatabaseAuthenticationEnabled (boolean) –
      
      Whether mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts is enabled.
    - AutomationMode (string) –
      
      The automation mode of the RDS Custom DB instance: full or all-paused. If full, the DB instance automates monitoring and instance recovery. If all-paused, the instance pauses automation for the duration set by --resume-full-automation-mode-minutes.
    - ResumeFullAutomationModeTime (datetime) –
      
      The number of minutes to pause the automation. When the time period ends, RDS Custom resumes full automation. The minimum value is 60 (default). The maximum value is 1,440.
    - StorageThroughput (integer) –
      
      The storage throughput of the DB instance.
  - LatestRestorableTime (datetime) –
    
    Specifies the latest time to which a database can be restored with point-in-time restore.
  - MultiAZ (boolean) –
    
    Specifies if the DB instance is a Multi-AZ deployment. This setting doesn’t apply to RDS Custom.
  - EngineVersion (string) –
    
    Indicates the database engine version.
  - AutoMinorVersionUpgrade (boolean) –
    
    A value that indicates that minor version patches are applied automatically.
  - ReadReplicaSourceDBInstanceIdentifier (string) –
    
    Contains the identifier of the source DB instance if this DB instance is a read replica.
  - ReadReplicaDBInstanceIdentifiers (list) –
    
    Contains one or more identifiers of the read replicas associated with this DB instance.
    - (string) –
  - ReadReplicaDBClusterIdentifiers (list) –
    
    Contains one or more identifiers of Aurora DB clusters to which the RDS DB instance is replicated as a read replica. For example, when you create an Aurora read replica of an RDS for MySQL DB instance, the Aurora MySQL DB cluster for the Aurora read replica is shown. This output doesn’t contain information about cross-Region Aurora read replicas.
    
    Note
    
    Currently, each RDS DB instance can have only one Aurora read replica.
    - (string) –
  - ReplicaMode (string) –
    
    The open mode of an Oracle read replica. The default is open-read-only. For more information, see Working with Oracle Read Replicas for Amazon RDS in the Amazon RDS User Guide.
    
    Note
    
    This attribute is only supported in RDS for Oracle.
  - LicenseModel (string) –
    
    License model information for this DB instance. This setting doesn’t apply to RDS Custom.
  - Iops (integer) –
    
    Specifies the Provisioned IOPS (I/O operations per second) value.
  - OptionGroupMemberships (list) –
    
    Provides the list of option group memberships for this DB instance.
    - (dict) –
      
      Provides information on the option groups the DB instance is a member of.
      - OptionGroupName (string) –
        
        The name of the option group that the instance belongs to.
      - Status (string) –
        
        The status of the DB instance’s option group membership. Valid values are: in-sync, pending-apply, pending-removal, pending-maintenance-apply, pending-maintenance-removal, applying, removing, and failed.
  - CharacterSetName (string) –
    
    If present, specifies the name of the character set that this instance is associated with.
  - NcharCharacterSetName (string) –
    
    The name of the NCHAR character set for the Oracle DB instance. This character set specifies the Unicode encoding for data stored in table columns of type NCHAR, NCLOB, or NVARCHAR2.
  - SecondaryAvailabilityZone (string) –
    
    If present, specifies the name of the secondary Availability Zone for a DB instance with multi-AZ support.
  - PubliclyAccessible (boolean) –
    
    Specifies the accessibility options for the DB instance.
    
    When the DB cluster is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB cluster’s virtual private cloud (VPC). It resolves to the public IP address from outside of the DB cluster’s VPC. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn’t permitted if the security group assigned to the DB cluster doesn’t permit it.
    
    When the DB instance isn’t publicly accessible, it is an internal DB instance with a DNS name that resolves to a private IP address.
    
    For more information, see CreateDBInstance.
  - StatusInfos (list) –
    
    The status of a read replica. If the instance isn’t a read replica, this is blank.
    - (dict) –
      
      Provides a list of status information for a DB instance.
      - StatusType (string) –
        
        This value is currently “read replication.”
      - Normal (boolean) –
        
        Boolean value that is true if the instance is operating normally, or false if the instance is in an error state.
      - Status (string) –
        
        Status of the DB instance. For a StatusType of read replica, the values can be replicating, replication stop point set, replication stop point reached, error, stopped, or terminated.
      - Message (string) –
        
        Details of the error if there is an error for the instance. If the instance isn’t in an error state, this value is blank.
  - StorageType (string) –
    
    Specifies the storage type associated with the DB instance.
  - TdeCredentialArn (string) –
    
    The ARN from the key store with which the instance is associated for TDE encryption.
  - DbInstancePort (integer) –
    
    Specifies the port that the DB instance listens on. If the DB instance is part of a DB cluster, this can be a different port than the DB cluster port.
  - DBClusterIdentifier (string) –
    
    If the DB instance is a member of a DB cluster, contains the name of the DB cluster that the DB instance is a member of.
  - StorageEncrypted (boolean) –
    
    Specifies whether the DB instance is encrypted.
  - KmsKeyId (string) –
    
    If StorageEncrypted is true, the Amazon Web Services KMS key identifier for the encrypted DB instance.
    
    The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
  - DbiResourceId (string) –
    
    The Amazon Web Services Region-unique, immutable identifier for the DB instance. This identifier is found in Amazon Web Services CloudTrail log entries whenever the Amazon Web Services KMS key for the DB instance is accessed.
  - CACertificateIdentifier (string) –
    
    The identifier of the CA certificate for this DB instance.
    
    For more information, see Using SSL/TLS to encrypt a connection to a DB instance in the Amazon RDS User Guide and Using SSL/TLS to encrypt a connection to a DB cluster in the Amazon Aurora User Guide.
  - DomainMemberships (list) –
    
    The Active Directory Domain membership records associated with the DB instance.
    - (dict) –
      
      An Active Directory Domain membership record associated with the DB instance or cluster.
      - Domain (string) –
        
        The identifier of the Active Directory Domain.
      - Status (string) –
        
        The status of the Active Directory Domain membership for the DB instance or cluster. Values include joined, pending-join, failed, and so on.
      - FQDN (string) –
        
        The fully qualified domain name of the Active Directory Domain.
      - IAMRoleName (string) –
        
        The name of the IAM role to be used when making API calls to the Directory Service.
  - CopyTagsToSnapshot (boolean) –
    
    Specifies whether tags are copied from the DB instance to snapshots of the DB instance.
    
    Amazon Aurora
    
    Not applicable. Copying tags to snapshots is managed by the DB cluster. Setting this value for an Aurora DB instance has no effect on the DB cluster setting. For more information, see DBCluster.
  - MonitoringInterval (integer) –
    
    The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB instance.
  - EnhancedMonitoringResourceArn (string) –
    
    The Amazon Resource Name (ARN) of the Amazon CloudWatch Logs log stream that receives the Enhanced Monitoring metrics data for the DB instance.
  - MonitoringRoleArn (string) –
    
    The ARN for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs.
  - PromotionTier (integer) –
    
    A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster in the Amazon Aurora User Guide.
  - DBInstanceArn (string) –
    
    The Amazon Resource Name (ARN) for the DB instance.
  - Timezone (string) –
    
    The time zone of the DB instance. In most cases, the Timezone element is empty. Timezone content appears only for Microsoft SQL Server DB instances that were created with a time zone specified.
  - IAMDatabaseAuthenticationEnabled (boolean) –
    
    True if mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
    
    IAM database authentication can be enabled for the following database engines
    - For MySQL 5.6, minor version 5.6.34 or higher
    - For MySQL 5.7, minor version 5.7.16 or higher
    - Aurora 5.6 or higher. To enable IAM database authentication for Aurora, see DBCluster Type.
  - PerformanceInsightsEnabled (boolean) –
    
    True if Performance Insights is enabled for the DB instance, and otherwise false.
  - PerformanceInsightsKMSKeyId (string) –
    
    The Amazon Web Services KMS key identifier for encryption of Performance Insights data.
    
    The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
  - PerformanceInsightsRetentionPeriod (integer) –
    
    The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
    - 7
    - month * 31, where month is a number of months from 1-23
    - 731
    For example, the following values are valid:
    - 93 (3 months * 31)
    - 341 (11 months * 31)
    - 589 (19 months * 31)
    - 731
  - EnabledCloudwatchLogsExports (list) –
    
    A list of log types that this DB instance is configured to export to CloudWatch Logs.
    
    Log types vary by DB engine. For information about the log types for each DB engine, see Amazon RDS Database Log Files in the Amazon RDS User Guide.
    - (string) –
  - ProcessorFeatures (list) –
    
    The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
    - (dict) –
      
      Contains the processor features of a DB instance class.
      
      To specify the number of CPU cores, use the coreCount feature name for the Name parameter. To specify the number of threads per core, use the threadsPerCore feature name for the Name parameter.
      
      You can set the processor features of the DB instance class for a DB instance when you call one of the following actions:
      - CreateDBInstance
      - ModifyDBInstance
      - RestoreDBInstanceFromDBSnapshot
      - RestoreDBInstanceFromS3
      - RestoreDBInstanceToPointInTime
      You can view the valid processor values for a particular instance class by calling the DescribeOrderableDBInstanceOptions action and specifying the instance class for the DBInstanceClass parameter.
      
      In addition, you can use the following actions for DB instance class processor information:
      - DescribeDBInstances
      - DescribeDBSnapshots
      - DescribeValidDBInstanceModifications
      If you call DescribeDBInstances, ProcessorFeature returns non-null values only if the following conditions are met:
      - You are accessing an Oracle DB instance.
      - Your Oracle DB instance class supports configuring the number of CPU cores and threads per core.
      - The current number CPU cores and threads is set to a non-default value.
      For more information, see Configuring the Processor of the DB Instance Class in the Amazon RDS User Guide.
      - Name (string) –
        
        The name of the processor feature. Valid names are coreCount and threadsPerCore.
      - Value (string) –
        
        The value of a processor feature name.
  - DeletionProtection (boolean) –
    
    Indicates if the DB instance has deletion protection enabled. The database can’t be deleted when deletion protection is enabled. For more information, see Deleting a DB Instance.
  - AssociatedRoles (list) –
    
    The Amazon Web Services Identity and Access Management (IAM) roles associated with the DB instance.
    - (dict) –
      
      Describes an Amazon Web Services Identity and Access Management (IAM) role that is associated with a DB instance.
      - RoleArn (string) –
        
        The Amazon Resource Name (ARN) of the IAM role that is associated with the DB instance.
      - FeatureName (string) –
        
        The name of the feature associated with the Amazon Web Services Identity and Access Management (IAM) role. For information about supported feature names, see DBEngineVersion.
      - Status (string) –
        
        Describes the state of association between the IAM role and the DB instance. The Status property returns one of the following values:
        
        ACTIVE - the IAM role ARN is associated with the DB instance and can be used to access other Amazon Web Services services on your behalf.
        
        PENDING - the IAM role ARN is being associated with the DB instance.
        
        INVALID - the IAM role ARN is associated with the DB instance, but the DB instance is unable to assume the IAM role in order to access other Amazon Web Services services on your behalf.
  - ListenerEndpoint (dict) –
    
    Specifies the listener connection endpoint for SQL Server Always On.
    - Address (string) –
      
      Specifies the DNS address of the DB instance.
    - Port (integer) –
      
      Specifies the port that the database engine is listening on.
    - HostedZoneId (string) –
      
      Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
  - MaxAllocatedStorage (integer) –
    
    The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
  - TagList (list) –
    
    A list of tags. For more information, see Tagging Amazon RDS Resources in the Amazon RDS User Guide.
    - (dict) –
      
      Metadata assigned to an Amazon RDS resource consisting of a key-value pair.
      
      For more information, see Tagging Amazon RDS Resources in the Amazon RDS User Guide.
      - Key (string) –
        
        A key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can’t be prefixed with aws: or rds:. The string can only contain only the set of Unicode letters, digits, white-space, ‘_’, ‘.’, ‘:’, ‘/’, ‘=’, ‘+’, ‘-’, ‘@’ (Java regex: “^([\p{L}\p{Z}\p{N}_.:/=+\-@]*)$”).
      - Value (string) –
        
        A value is the optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can’t be prefixed with aws: or rds:. The string can only contain only the set of Unicode letters, digits, white-space, ‘_’, ‘.’, ‘:’, ‘/’, ‘=’, ‘+’, ‘-’, ‘@’ (Java regex: “^([\p{L}\p{Z}\p{N}_.:/=+\-@]*)$”).
  - DBInstanceAutomatedBackupsReplications (list) –
    
    The list of replicated automated backups associated with the DB instance.
    - (dict) –
      
      Automated backups of a DB instance replicated to another Amazon Web Services Region. They consist of system backups, transaction logs, and database instance properties.
      - DBInstanceAutomatedBackupsArn (string) –
        
        The Amazon Resource Name (ARN) of the replicated automated backups.
  - CustomerOwnedIpEnabled (boolean) –
    
    Specifies whether a customer-owned IP address (CoIP) is enabled for an RDS on Outposts DB instance.
    
    A *CoIP *provides local or external connectivity to resources in your Outpost subnets through your on-premises network. For some use cases, a CoIP can provide lower latency for connections to the DB instance from outside of its virtual private cloud (VPC) on your local network.
    
    For more information about RDS on Outposts, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.
    
    For more information about CoIPs, see Customer-owned IP addresses in the Amazon Web Services Outposts User Guide.
  - AwsBackupRecoveryPointArn (string) –
    
    The Amazon Resource Name (ARN) of the recovery point in Amazon Web Services Backup.
  - ActivityStreamStatus (string) –
    
    The status of the database activity stream.
  - ActivityStreamKmsKeyId (string) –
    
    The Amazon Web Services KMS key identifier used for encrypting messages in the database activity stream. The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
  - ActivityStreamKinesisStreamName (string) –
    
    The name of the Amazon Kinesis data stream used for the database activity stream.
  - ActivityStreamMode (string) –
    
    The mode of the database activity stream. Database events such as a change or access generate an activity stream event. RDS for Oracle always handles these events asynchronously.
  - ActivityStreamEngineNativeAuditFieldsIncluded (boolean) –
    
    Indicates whether engine-native audit fields are included in the database activity stream.
  - AutomationMode (string) –
    
    The automation mode of the RDS Custom DB instance: full or all paused. If full, the DB instance automates monitoring and instance recovery. If all paused, the instance pauses automation for the duration set by --resume-full-automation-mode-minutes.
  - ResumeFullAutomationModeTime (datetime) –
    
    The number of minutes to pause the automation. When the time period ends, RDS Custom resumes full automation. The minimum value is 60 (default). The maximum value is 1,440.
  - CustomIamInstanceProfile (string) –
    
    The instance profile associated with the underlying Amazon EC2 instance of an RDS Custom DB instance. The instance profile must meet the following requirements:
    - The profile must exist in your account.
    - The profile must have an IAM role that Amazon EC2 has permissions to assume.
    - The instance profile name and the associated IAM role name must start with the prefix AWSRDSCustom.
    For the list of permissions required for the IAM role, see Configure IAM and your VPC in the Amazon RDS User Guide.
  - BackupTarget (string) –
    
    Specifies where automated backups and manual snapshots are stored: Amazon Web Services Outposts or the Amazon Web Services Region.
  - NetworkType (string) –
    
    The network type of the DB instance.
    
    Valid values:
    - IPV4
    - DUAL
    The network type is determined by the DBSubnetGroup specified for the DB instance. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols ( DUAL).
    
    For more information, see Working with a DB instance in a VPC in the Amazon RDS User Guide and Working with a DB instance in a VPC in the Amazon Aurora User Guide.
  - ActivityStreamPolicyStatus (string) –
    
    The status of the policy state of the activity stream.
  - StorageThroughput (integer) –
    
    Specifies the storage throughput for the DB instance.
    
    This setting applies only to the gp3 storage type.
  - DBSystemId (string) –
    
    The Oracle system ID (Oracle SID) for a container database (CDB). The Oracle SID is also the name of the CDB. This setting is valid for RDS Custom only.
  - MasterUserSecret (dict) –
    
    Contains the secret managed by RDS in Amazon Web Services Secrets Manager for the master user password.
    
    For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide.
    - SecretArn (string) –
      
      The Amazon Resource Name (ARN) of the secret.
    - SecretStatus (string) –
      
      The status of the secret.
      
      The possible status values include the following:
      - creating - The secret is being created.
      - active - The secret is available for normal use and rotation.
      - rotating - The secret is being rotated.
      - impaired - The secret can be used to access database credentials, but it can’t be rotated. A secret might have this status if, for example, permissions are changed so that RDS can no longer access either the secret or the KMS key for the secret. When a secret has this status, you can correct the condition that caused the status. Alternatively, modify the DB instance to turn off automatic management of database credentials, and then modify the DB instance again to turn on automatic management of database credentials.
    - KmsKeyId (string) –
      
      The Amazon Web Services KMS key identifier that is used to encrypt the secret.
  - CertificateDetails (dict) –
    
    The details of the DB instance’s server certificate.
    - CAIdentifier (string) –
      
      The CA identifier of the CA certificate used for the DB instance’s server certificate.
    - ValidTill (datetime) –
      
      The expiration date of the DB instance’s server certificate.
  - ReadReplicaSourceDBClusterIdentifier (string) –
    
    Contains the identifier of the source DB cluster if this DB instance is a read replica.

Exceptions

RDS.Client.exceptions.DBInstanceNotFoundFault
RDS.Client.exceptions.InvalidDBInstanceStateFault
RDS.Client.exceptions.DBSnapshotAlreadyExistsFault
RDS.Client.exceptions.SnapshotQuotaExceededFault
RDS.Client.exceptions.InvalidDBClusterStateFault
RDS.Client.exceptions.DBInstanceAutomatedBackupQuotaExceededFault

Examples

This example deletes the specified DB instance.

response = client.delete_db_instance(
    DBInstanceIdentifier='mymysqlinstance',
    SkipFinalSnapshot=True,
)

print(response)

Expected Output:

{
    'DBInstance': {
    },
    'ResponseMetadata': {
        '...': '...',
    },
}