SageMaker / Client / create_auto_ml_job

create_auto_ml_job#

SageMaker.Client.create_auto_ml_job(**kwargs)#

Creates an Autopilot job.

Find the best-performing model after you run an Autopilot job by calling DescribeAutoMLJob.

For information about how to use Autopilot, see Automate Model Development with Amazon SageMaker Autopilot.

See also: AWS API Documentation

Request Syntax

response = client.create_auto_ml_job(
    AutoMLJobName='string',
    InputDataConfig=[
        {
            'DataSource': {
                'S3DataSource': {
                    'S3DataType': 'ManifestFile'|'S3Prefix'|'AugmentedManifestFile',
                    'S3Uri': 'string'
                }
            },
            'CompressionType': 'None'|'Gzip',
            'TargetAttributeName': 'string',
            'ContentType': 'string',
            'ChannelType': 'training'|'validation'
        },
    ],
    OutputDataConfig={
        'KmsKeyId': 'string',
        'S3OutputPath': 'string'
    },
    ProblemType='BinaryClassification'|'MulticlassClassification'|'Regression',
    AutoMLJobObjective={
        'MetricName': 'Accuracy'|'MSE'|'F1'|'F1macro'|'AUC'|'RMSE'|'MAE'|'R2'|'BalancedAccuracy'|'Precision'|'PrecisionMacro'|'Recall'|'RecallMacro'
    },
    AutoMLJobConfig={
        'CompletionCriteria': {
            'MaxCandidates': 123,
            'MaxRuntimePerTrainingJobInSeconds': 123,
            'MaxAutoMLJobRuntimeInSeconds': 123
        },
        'SecurityConfig': {
            'VolumeKmsKeyId': 'string',
            'EnableInterContainerTrafficEncryption': True|False,
            'VpcConfig': {
                'SecurityGroupIds': [
                    'string',
                ],
                'Subnets': [
                    'string',
                ]
            }
        },
        'DataSplitConfig': {
            'ValidationFraction': ...
        },
        'CandidateGenerationConfig': {
            'FeatureSpecificationS3Uri': 'string',
            'AlgorithmsConfig': [
                {
                    'AutoMLAlgorithms': [
                        'xgboost'|'linear-learner'|'mlp'|'lightgbm'|'catboost'|'randomforest'|'extra-trees'|'nn-torch'|'fastai',
                    ]
                },
            ]
        },
        'Mode': 'AUTO'|'ENSEMBLING'|'HYPERPARAMETER_TUNING'
    },
    RoleArn='string',
    GenerateCandidateDefinitionsOnly=True|False,
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    ModelDeployConfig={
        'AutoGenerateEndpointName': True|False,
        'EndpointName': 'string'
    }
)
Parameters:
  • AutoMLJobName (string) –

    [REQUIRED]

    Identifies an Autopilot job. The name must be unique to your account and is case insensitive.

  • InputDataConfig (list) –

    [REQUIRED]

    An array of channel objects that describes the input data and its location. Each channel is a named input source. Similar to InputDataConfig supported by HyperParameterTrainingJobDefinition. Format(s) supported: CSV, Parquet. A minimum of 500 rows is required for the training dataset. There is not a minimum number of rows required for the validation dataset.

    • (dict) –

      A channel is a named input source that training algorithms can consume. The validation dataset size is limited to less than 2 GB. The training dataset size must be less than 100 GB. For more information, see Channel.

      Note

      A validation dataset must contain the same headers as the training dataset.

      • DataSource (dict) – [REQUIRED]

        The data source for an AutoML channel.

        • S3DataSource (dict) – [REQUIRED]

          The Amazon S3 location of the input data.

          • S3DataType (string) – [REQUIRED]

            The data type.

            • If you choose S3Prefix, S3Uri identifies a key name prefix. SageMaker uses all objects that match the specified key name prefix for model training. The S3Prefix should have the following format: s3://DOC-EXAMPLE-BUCKET/DOC-EXAMPLE-FOLDER-OR-FILE

            • If you choose ManifestFile, S3Uri identifies an object that is a manifest file containing a list of object keys that you want SageMaker to use for model training. A ManifestFile should have the format shown below: [ {"prefix": "s3://DOC-EXAMPLE-BUCKET/DOC-EXAMPLE-FOLDER/DOC-EXAMPLE-PREFIX/"}, "DOC-EXAMPLE-RELATIVE-PATH/DOC-EXAMPLE-FOLDER/DATA-1", "DOC-EXAMPLE-RELATIVE-PATH/DOC-EXAMPLE-FOLDER/DATA-2", ... "DOC-EXAMPLE-RELATIVE-PATH/DOC-EXAMPLE-FOLDER/DATA-N" ]

            • If you choose AugmentedManifestFile, S3Uri identifies an object that is an augmented manifest file in JSON lines format. This file contains the data you want to use for model training. AugmentedManifestFile is available for V2 API jobs only (for example, for jobs created by calling CreateAutoMLJobV2). Here is a minimal, single-record example of an AugmentedManifestFile: {"source-ref": "s3://DOC-EXAMPLE-BUCKET/DOC-EXAMPLE-FOLDER/cats/cat.jpg", "label-metadata": {"class-name": "cat" } For more information on AugmentedManifestFile, see Provide Dataset Metadata to Training Jobs with an Augmented Manifest File.

          • S3Uri (string) – [REQUIRED]

            The URL to the Amazon S3 data source. The Uri refers to the Amazon S3 prefix or ManifestFile depending on the data type.

      • CompressionType (string) –

        You can use Gzip or None. The default value is None.

      • TargetAttributeName (string) – [REQUIRED]

        The name of the target variable in supervised learning, usually represented by ‘y’.

      • ContentType (string) –

        The content type of the data from the input source. You can use text/csv;header=present or x-application/vnd.amazon+parquet. The default value is text/csv;header=present.

      • ChannelType (string) –

        The channel type (optional) is an enum string. The default value is training. Channels for training and validation must share the same ContentType and TargetAttributeName. For information on specifying training and validation channel types, see How to specify training and validation datasets.

  • OutputDataConfig (dict) –

    [REQUIRED]

    Provides information about encryption and the Amazon S3 output path needed to store artifacts from an AutoML job. Format(s) supported: CSV.

    • KmsKeyId (string) –

      The Key Management Service (KMS) encryption key ID.

    • S3OutputPath (string) – [REQUIRED]

      The Amazon S3 output path. Must be 128 characters or less.

  • ProblemType (string) – Defines the type of supervised learning problem available for the candidates. For more information, see Amazon SageMaker Autopilot problem types.

  • AutoMLJobObjective (dict) –

    Defines the objective metric used to measure the predictive quality of an AutoML job. You provide an AutoMLJobObjective$MetricName and Autopilot infers whether to minimize or maximize it. For CreateAutoMLJobV2, only Accuracy is supported.

    • MetricName (string) – [REQUIRED]

      The name of the objective metric used to measure the predictive quality of a machine learning system. This metric is optimized during training to provide the best estimate for model parameter values from data.

      Here are the options:

      Accuracy

      The ratio of the number of correctly classified items to the total number of (correctly and incorrectly) classified items. It is used for both binary and multiclass classification. Accuracy measures how close the predicted class values are to the actual values. Values for accuracy metrics vary between zero (0) and one (1). A value of 1 indicates perfect accuracy, and 0 indicates perfect inaccuracy.

      AUC

      The area under the curve (AUC) metric is used to compare and evaluate binary classification by algorithms that return probabilities, such as logistic regression. To map the probabilities into classifications, these are compared against a threshold value.

      The relevant curve is the receiver operating characteristic curve (ROC curve). The ROC curve plots the true positive rate (TPR) of predictions (or recall) against the false positive rate (FPR) as a function of the threshold value, above which a prediction is considered positive. Increasing the threshold results in fewer false positives, but more false negatives.

      AUC is the area under this ROC curve. Therefore, AUC provides an aggregated measure of the model performance across all possible classification thresholds. AUC scores vary between 0 and 1. A score of 1 indicates perfect accuracy, and a score of one half (0.5) indicates that the prediction is not better than a random classifier.

      BalancedAccuracy

      BalancedAccuracy is a metric that measures the ratio of accurate predictions to all predictions. This ratio is calculated after normalizing true positives (TP) and true negatives (TN) by the total number of positive (P) and negative (N) values. It is used in both binary and multiclass classification and is defined as follows: 0.5*((TP/P)+(TN/N)), with values ranging from 0 to 1. BalancedAccuracy gives a better measure of accuracy when the number of positives or negatives differ greatly from each other in an imbalanced dataset. For example, when only 1% of email is spam.

      F1

      The F1 score is the harmonic mean of the precision and recall, defined as follows: F1 = 2 * (precision * recall) / (precision + recall). It is used for binary classification into classes traditionally referred to as positive and negative. Predictions are said to be true when they match their actual (correct) class, and false when they do not.

      Precision is the ratio of the true positive predictions to all positive predictions, and it includes the false positives in a dataset. Precision measures the quality of the prediction when it predicts the positive class.

      Recall (or sensitivity) is the ratio of the true positive predictions to all actual positive instances. Recall measures how completely a model predicts the actual class members in a dataset.

      F1 scores vary between 0 and 1. A score of 1 indicates the best possible performance, and 0 indicates the worst.

      F1macro

      The F1macro score applies F1 scoring to multiclass classification problems. It does this by calculating the precision and recall, and then taking their harmonic mean to calculate the F1 score for each class. Lastly, the F1macro averages the individual scores to obtain the F1macro score. F1macro scores vary between 0 and 1. A score of 1 indicates the best possible performance, and 0 indicates the worst.

      MAE

      The mean absolute error (MAE) is a measure of how different the predicted and actual values are, when they’re averaged over all values. MAE is commonly used in regression analysis to understand model prediction error. If there is linear regression, MAE represents the average distance from a predicted line to the actual value. MAE is defined as the sum of absolute errors divided by the number of observations. Values range from 0 to infinity, with smaller numbers indicating a better model fit to the data.

      MSE

      The mean squared error (MSE) is the average of the squared differences between the predicted and actual values. It is used for regression. MSE values are always positive. The better a model is at predicting the actual values, the smaller the MSE value is

      Precision

      Precision measures how well an algorithm predicts the true positives (TP) out of all of the positives that it identifies. It is defined as follows: Precision = TP/(TP+FP), with values ranging from zero (0) to one (1), and is used in binary classification. Precision is an important metric when the cost of a false positive is high. For example, the cost of a false positive is very high if an airplane safety system is falsely deemed safe to fly. A false positive (FP) reflects a positive prediction that is actually negative in the data.

      PrecisionMacro

      The precision macro computes precision for multiclass classification problems. It does this by calculating precision for each class and averaging scores to obtain precision for several classes. PrecisionMacro scores range from zero (0) to one (1). Higher scores reflect the model’s ability to predict true positives (TP) out of all of the positives that it identifies, averaged across multiple classes.

      R2

      R2, also known as the coefficient of determination, is used in regression to quantify how much a model can explain the variance of a dependent variable. Values range from one (1) to negative one (-1). Higher numbers indicate a higher fraction of explained variability. R2 values close to zero (0) indicate that very little of the dependent variable can be explained by the model. Negative values indicate a poor fit and that the model is outperformed by a constant function. For linear regression, this is a horizontal line.

      Recall

      Recall measures how well an algorithm correctly predicts all of the true positives (TP) in a dataset. A true positive is a positive prediction that is also an actual positive value in the data. Recall is defined as follows: Recall = TP/(TP+FN), with values ranging from 0 to 1. Higher scores reflect a better ability of the model to predict true positives (TP) in the data, and is used in binary classification.

      Recall is important when testing for cancer because it’s used to find all of the true positives. A false positive (FP) reflects a positive prediction that is actually negative in the data. It is often insufficient to measure only recall, because predicting every output as a true positive yield a perfect recall score.

      RecallMacro

      The RecallMacro computes recall for multiclass classification problems by calculating recall for each class and averaging scores to obtain recall for several classes. RecallMacro scores range from 0 to 1. Higher scores reflect the model’s ability to predict true positives (TP) in a dataset. Whereas, a true positive reflects a positive prediction that is also an actual positive value in the data. It is often insufficient to measure only recall, because predicting every output as a true positive yields a perfect recall score.

      RMSE

      Root mean squared error (RMSE) measures the square root of the squared difference between predicted and actual values, and it’s averaged over all values. It is used in regression analysis to understand model prediction error. It’s an important metric to indicate the presence of large model errors and outliers. Values range from zero (0) to infinity, with smaller numbers indicating a better model fit to the data. RMSE is dependent on scale, and should not be used to compare datasets of different sizes.

      If you do not specify a metric explicitly, the default behavior is to automatically use:

      • MSE: for regression.

      • F1: for binary classification

      • Accuracy: for multiclass classification.

  • AutoMLJobConfig (dict) –

    A collection of settings used to configure an AutoML job.

    • CompletionCriteria (dict) –

      How long an AutoML job is allowed to run, or how many candidates a job is allowed to generate.

      • MaxCandidates (integer) –

        The maximum number of times a training job is allowed to run.

        For V2 jobs (jobs created by calling CreateAutoMLJobV2), the supported value is 1.

      • MaxRuntimePerTrainingJobInSeconds (integer) –

        The maximum time, in seconds, that each training job executed inside hyperparameter tuning is allowed to run as part of a hyperparameter tuning job. For more information, see the StoppingCondition used by the CreateHyperParameterTuningJob action.

        For V2 jobs (jobs created by calling CreateAutoMLJobV2), this field controls the runtime of the job candidate.

      • MaxAutoMLJobRuntimeInSeconds (integer) –

        The maximum runtime, in seconds, an AutoML job has to complete.

        If an AutoML job exceeds the maximum runtime, the job is stopped automatically and its processing is ended gracefully. The AutoML job identifies the best model whose training was completed and marks it as the best-performing model. Any unfinished steps of the job, such as automatic one-click Autopilot model deployment, are not completed.

    • SecurityConfig (dict) –

      The security configuration for traffic encryption or Amazon VPC settings.

      • VolumeKmsKeyId (string) –

        The key used to encrypt stored data.

      • EnableInterContainerTrafficEncryption (boolean) –

        Whether to use traffic encryption between the container layers.

      • VpcConfig (dict) –

        The VPC configuration.

        • SecurityGroupIds (list) – [REQUIRED]

          The VPC security group IDs, in the form sg-xxxxxxxx. Specify the security groups for the VPC that is specified in the Subnets field.

          • (string) –

        • Subnets (list) – [REQUIRED]

          The ID of the subnets in the VPC to which you want to connect your training job or model. For information about the availability of specific instance types, see Supported Instance Types and Availability Zones.

          • (string) –

    • DataSplitConfig (dict) –

      The configuration for splitting the input training dataset.

      Type: AutoMLDataSplitConfig

      • ValidationFraction (float) –

        The validation fraction (optional) is a float that specifies the portion of the training dataset to be used for validation. The default value is 0.2, and values must be greater than 0 and less than 1. We recommend setting this value to be less than 0.5.

    • CandidateGenerationConfig (dict) –

      The configuration for generating a candidate for an AutoML job (optional).

      • FeatureSpecificationS3Uri (string) –

        A URL to the Amazon S3 data source containing selected features from the input data source to run an Autopilot job. You can input FeatureAttributeNames (optional) in JSON format as shown below:

        { "FeatureAttributeNames":["col1", "col2", ...] }.

        You can also specify the data type of the feature (optional) in the format shown below:

        { "FeatureDataTypes":{"col1":"numeric", "col2":"categorical" ... } }

        Note

        These column keys may not include the target column.

        In ensembling mode, Autopilot only supports the following data types: numeric, categorical, text, and datetime. In HPO mode, Autopilot can support numeric, categorical, text, datetime, and sequence.

        If only FeatureDataTypes is provided, the column keys ( col1, col2,..) should be a subset of the column names in the input data.

        If both FeatureDataTypes and FeatureAttributeNames are provided, then the column keys should be a subset of the column names provided in FeatureAttributeNames.

        The key name FeatureAttributeNames is fixed. The values listed in ["col1", "col2", ...] are case sensitive and should be a list of strings containing unique values that are a subset of the column names in the input data. The list of columns provided must not include the target column.

      • AlgorithmsConfig (list) –

        Stores the configuration information for the selection of algorithms used to train the model candidates.

        The list of available algorithms to choose from depends on the training mode set in AutoMLJobConfig.Mode.

        • AlgorithmsConfig should not be set in AUTO training mode.

        • When AlgorithmsConfig is provided, one AutoMLAlgorithms attribute must be set and one only. If the list of algorithms provided as values for AutoMLAlgorithms is empty, AutoMLCandidateGenerationConfig uses the full set of algorithms for the given training mode.

        • When AlgorithmsConfig is not provided, AutoMLCandidateGenerationConfig uses the full set of algorithms for the given training mode.

        For the list of all algorithms per training mode, see AutoMLAlgorithmConfig.

        For more information on each algorithm, see the Algorithm support section in Autopilot developer guide.

        • (dict) –

          The collection of algorithms run on a dataset for training the model candidates of an Autopilot job.

          • AutoMLAlgorithms (list) – [REQUIRED]

            The selection of algorithms run on a dataset to train the model candidates of an Autopilot job.

            Note

            Selected algorithms must belong to the list corresponding to the training mode set in AutoMLJobConfig.Mode ( ENSEMBLING or HYPERPARAMETER_TUNING). Choose a minimum of 1 algorithm.

            • In ENSEMBLING mode:

              • ”catboost”

              • ”extra-trees”

              • ”fastai”

              • ”lightgbm”

              • ”linear-learner”

              • ”nn-torch”

              • ”randomforest”

              • ”xgboost”

            • In HYPERPARAMETER_TUNING mode:

              • ”linear-learner”

              • ”mlp”

              • ”xgboost”

            • (string) –

    • Mode (string) –

      The method that Autopilot uses to train the data. You can either specify the mode manually or let Autopilot choose for you based on the dataset size by selecting AUTO. In AUTO mode, Autopilot chooses ENSEMBLING for datasets smaller than 100 MB, and HYPERPARAMETER_TUNING for larger ones.

      The ENSEMBLING mode uses a multi-stack ensemble model to predict classification and regression tasks directly from your dataset. This machine learning mode combines several base models to produce an optimal predictive model. It then uses a stacking ensemble method to combine predictions from contributing members. A multi-stack ensemble model can provide better performance over a single model by combining the predictive capabilities of multiple models. See Autopilot algorithm support for a list of algorithms supported by ENSEMBLING mode.

      The HYPERPARAMETER_TUNING (HPO) mode uses the best hyperparameters to train the best version of a model. HPO automatically selects an algorithm for the type of problem you want to solve. Then HPO finds the best hyperparameters according to your objective metric. See Autopilot algorithm support for a list of algorithms supported by HYPERPARAMETER_TUNING mode.

  • RoleArn (string) –

    [REQUIRED]

    The ARN of the role that is used to access the data.

  • GenerateCandidateDefinitionsOnly (boolean) – Generates possible candidates without training the models. A candidate is a combination of data preprocessors, algorithms, and algorithm parameter settings.

  • Tags (list) –

    An array of key-value pairs. You can use tags to categorize your Amazon Web Services resources in different ways, for example, by purpose, owner, or environment. For more information, see Tagging Amazon Web ServicesResources. Tag keys must be unique per resource.

    • (dict) –

      A tag object that consists of a key and an optional value, used to manage metadata for SageMaker Amazon Web Services resources.

      You can add tags to notebook instances, training jobs, hyperparameter tuning jobs, batch transform jobs, models, labeling jobs, work teams, endpoint configurations, and endpoints. For more information on adding tags to SageMaker resources, see AddTags.

      For more information on adding metadata to your Amazon Web Services resources with tagging, see Tagging Amazon Web Services resources. For advice on best practices for managing Amazon Web Services resources with tagging, see Tagging Best Practices: Implement an Effective Amazon Web Services Resource Tagging Strategy.

      • Key (string) – [REQUIRED]

        The tag key. Tag keys must be unique per resource.

      • Value (string) – [REQUIRED]

        The tag value.

  • ModelDeployConfig (dict) –

    Specifies how to generate the endpoint name for an automatic one-click Autopilot model deployment.

    • AutoGenerateEndpointName (boolean) –

      Set to True to automatically generate an endpoint name for a one-click Autopilot model deployment; set to False otherwise. The default value is False.

      Note

      If you set AutoGenerateEndpointName to True, do not specify the EndpointName; otherwise a 400 error is thrown.

    • EndpointName (string) –

      Specifies the endpoint name to use for a one-click Autopilot model deployment if the endpoint name is not generated automatically.

      Note

      Specify the EndpointName if and only if you set AutoGenerateEndpointName to False; otherwise a 400 error is thrown.

Return type:

dict

Returns:

Response Syntax

{
    'AutoMLJobArn': 'string'
}

Response Structure

  • (dict) –

    • AutoMLJobArn (string) –

      The unique ARN assigned to the AutoML job when it is created.

Exceptions

  • SageMaker.Client.exceptions.ResourceInUse

  • SageMaker.Client.exceptions.ResourceLimitExceeded