DatabaseMigrationService / Client / modify_replication_task

modify_replication_task#

DatabaseMigrationService.Client.modify_replication_task(**kwargs)#

Modifies the specified replication task.

You can’t modify the task endpoints. The task must be stopped before you can modify it.

For more information about DMS tasks, see Working with Migration Tasks in the Database Migration Service User Guide.

See also: AWS API Documentation

Request Syntax

response = client.modify_replication_task(
    ReplicationTaskArn='string',
    ReplicationTaskIdentifier='string',
    MigrationType='full-load'|'cdc'|'full-load-and-cdc',
    TableMappings='string',
    ReplicationTaskSettings='string',
    CdcStartTime=datetime(2015, 1, 1),
    CdcStartPosition='string',
    CdcStopPosition='string',
    TaskData='string'
)
Parameters:

  • ReplicationTaskArn (string) –

    [REQUIRED]

    The Amazon Resource Name (ARN) of the replication task.

  • ReplicationTaskIdentifier (string) –

    The replication task identifier.

    Constraints:

    • Must contain 1-255 alphanumeric characters or hyphens.

    • First character must be a letter.

    • Cannot end with a hyphen or contain two consecutive hyphens.

  • MigrationType (string) – The migration type. Valid values: full-load | cdc | full-load-and-cdc

  • TableMappings (string) – When using the CLI or boto3, provide the path of the JSON file that contains the table mappings. Precede the path with file://. For example, --table-mappings file://mappingfile.json. When working with the DMS API, provide the JSON as the parameter value.

  • ReplicationTaskSettings (string) – JSON file that contains settings for the task, such as task metadata settings.

  • CdcStartTime (datetime) –

    Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.

    Timestamp Example: –cdc-start-time “2018-03-08T12:12:12”

  • CdcStartPosition (string) –

    Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.

    The value can be in date, checkpoint, or LSN/SCN format.

    Date Example: –cdc-start-position “2018-03-08T12:12:12”

    Checkpoint Example: –cdc-start-position “checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93”

    LSN Example: –cdc-start-position “mysql-bin-changelog.000024:373”

    Note

    When you use this task setting with a source PostgreSQL database, a logical replication slot should already be created and associated with the source endpoint. You can verify this by setting the slotName extra connection attribute to the name of this logical replication slot. For more information, see Extra Connection Attributes When Using PostgreSQL as a Source for DMS.

  • CdcStopPosition (string) –

    Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.

    Server time example: –cdc-stop-position “server_time:2018-02-09T12:12:12”

    Commit time example: –cdc-stop-position “commit_time: 2018-02-09T12:12:12“

  • TaskData (string) – Supplemental information that the task requires to migrate the data for certain source and target endpoints. For more information, see Specifying Supplemental Data for Task Settings in the Database Migration Service User Guide.

Return type:

dict

Returns:

Response Syntax

{
    'ReplicationTask': {
        'ReplicationTaskIdentifier': 'string',
        'SourceEndpointArn': 'string',
        'TargetEndpointArn': 'string',
        'ReplicationInstanceArn': 'string',
        'MigrationType': 'full-load'|'cdc'|'full-load-and-cdc',
        'TableMappings': 'string',
        'ReplicationTaskSettings': 'string',
        'Status': 'string',
        'LastFailureMessage': 'string',
        'StopReason': 'string',
        'ReplicationTaskCreationDate': datetime(2015, 1, 1),
        'ReplicationTaskStartDate': datetime(2015, 1, 1),
        'CdcStartPosition': 'string',
        'CdcStopPosition': 'string',
        'RecoveryCheckpoint': 'string',
        'ReplicationTaskArn': 'string',
        'ReplicationTaskStats': {
            'FullLoadProgressPercent': 123,
            'ElapsedTimeMillis': 123,
            'TablesLoaded': 123,
            'TablesLoading': 123,
            'TablesQueued': 123,
            'TablesErrored': 123,
            'FreshStartDate': datetime(2015, 1, 1),
            'StartDate': datetime(2015, 1, 1),
            'StopDate': datetime(2015, 1, 1),
            'FullLoadStartDate': datetime(2015, 1, 1),
            'FullLoadFinishDate': datetime(2015, 1, 1)
        },
        'TaskData': 'string',
        'TargetReplicationInstanceArn': 'string'
    }
}

Response Structure

  • (dict) –

    • ReplicationTask (dict) –

      The replication task that was modified.

      • ReplicationTaskIdentifier (string) –

        The user-assigned replication task identifier or name.

        Constraints:

        • Must contain 1-255 alphanumeric characters or hyphens.

        • First character must be a letter.

        • Cannot end with a hyphen or contain two consecutive hyphens.

      • SourceEndpointArn (string) –

        The Amazon Resource Name (ARN) that uniquely identifies the endpoint.

      • TargetEndpointArn (string) –

        The ARN that uniquely identifies the endpoint.

      • ReplicationInstanceArn (string) –

        The ARN of the replication instance.

      • MigrationType (string) –

        The type of migration.

      • TableMappings (string) –

        Table mappings specified in the task.

      • ReplicationTaskSettings (string) –

        The settings for the replication task.

      • Status (string) –

        The status of the replication task. This response parameter can return one of the following values:

        Note

        StartReplicationTaskAssessmentRun is an improved premigration task assessment operation. The StartReplicationTaskAssessment operation assesses data type compatibility only between the source and target database of a given migration task. In contrast, StartReplicationTaskAssessmentRun enables you to specify a variety of premigration task assessments in addition to data type compatibility. These assessments include ones for the validity of primary key definitions and likely issues with database migration performance, among others.

      • LastFailureMessage (string) –

        The last error (failure) message generated for the replication task.

      • StopReason (string) –

        The reason the replication task was stopped. This response parameter can return one of the following values:

        • "Stop Reason NORMAL"

        • "Stop Reason RECOVERABLE_ERROR"

        • "Stop Reason FATAL_ERROR"

        • "Stop Reason FULL_LOAD_ONLY_FINISHED"

        • "Stop Reason STOPPED_AFTER_FULL_LOAD" – Full load completed, with cached changes not applied

        • "Stop Reason STOPPED_AFTER_CACHED_EVENTS" – Full load completed, with cached changes applied

        • "Stop Reason EXPRESS_LICENSE_LIMITS_REACHED"

        • "Stop Reason STOPPED_AFTER_DDL_APPLY" – User-defined stop task after DDL applied

        • "Stop Reason STOPPED_DUE_TO_LOW_MEMORY"

        • "Stop Reason STOPPED_DUE_TO_LOW_DISK"

        • "Stop Reason STOPPED_AT_SERVER_TIME" – User-defined server time for stopping task

        • "Stop Reason STOPPED_AT_COMMIT_TIME" – User-defined commit time for stopping task

        • "Stop Reason RECONFIGURATION_RESTART"

        • "Stop Reason RECYCLE_TASK"

      • ReplicationTaskCreationDate (datetime) –

        The date the replication task was created.

      • ReplicationTaskStartDate (datetime) –

        The date the replication task is scheduled to start.

      • CdcStartPosition (string) –

        Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want the CDC operation to start. Specifying both values results in an error.

        The value can be in date, checkpoint, or LSN/SCN format.

        Date Example: –cdc-start-position “2018-03-08T12:12:12”

        Checkpoint Example: –cdc-start-position “checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93”

        LSN Example: –cdc-start-position “mysql-bin-changelog.000024:373”

      • CdcStopPosition (string) –

        Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.

        Server time example: –cdc-stop-position “server_time:2018-02-09T12:12:12”

        Commit time example: –cdc-stop-position “commit_time: 2018-02-09T12:12:12“

      • RecoveryCheckpoint (string) –

        Indicates the last checkpoint that occurred during a change data capture (CDC) operation. You can provide this value to the CdcStartPosition parameter to start a CDC operation that begins at that checkpoint.

      • ReplicationTaskArn (string) –

        The Amazon Resource Name (ARN) of the replication task.

      • ReplicationTaskStats (dict) –

        The statistics for the task, including elapsed time, tables loaded, and table errors.

        • FullLoadProgressPercent (integer) –

          The percent complete for the full load migration task.

        • ElapsedTimeMillis (integer) –

          The elapsed time of the task, in milliseconds.

        • TablesLoaded (integer) –

          The number of tables loaded for this task.

        • TablesLoading (integer) –

          The number of tables currently loading for this task.

        • TablesQueued (integer) –

          The number of tables queued for this task.

        • TablesErrored (integer) –

          The number of errors that have occurred during this task.

        • FreshStartDate (datetime) –

          The date the replication task was started either with a fresh start or a target reload.

        • StartDate (datetime) –

          The date the replication task was started either with a fresh start or a resume. For more information, see StartReplicationTaskType.

        • StopDate (datetime) –

          The date the replication task was stopped.

        • FullLoadStartDate (datetime) –

          The date the replication task full load was started.

        • FullLoadFinishDate (datetime) –

          The date the replication task full load was completed.

      • TaskData (string) –

        Supplemental information that the task requires to migrate the data for certain source and target endpoints. For more information, see Specifying Supplemental Data for Task Settings in the Database Migration Service User Guide.

      • TargetReplicationInstanceArn (string) –

        The ARN of the replication instance to which this task is moved in response to running the MoveReplicationTask operation. Otherwise, this response parameter isn’t a member of the ReplicationTask object.

Exceptions

  • DatabaseMigrationService.Client.exceptions.InvalidResourceStateFault

  • DatabaseMigrationService.Client.exceptions.ResourceNotFoundFault

  • DatabaseMigrationService.Client.exceptions.ResourceAlreadyExistsFault

  • DatabaseMigrationService.Client.exceptions.KMSKeyNotAccessibleFault