ECS / Client / describe_task_sets

describe_task_sets

ECS.Client.describe_task_sets(**kwargs)

Describes the task sets in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.

See also: AWS API Documentation

Request Syntax

response = client.describe_task_sets(
    cluster='string',
    service='string',
    taskSets=[
        'string',
    ],
    include=[
        'TAGS',
    ]
)

Parameters:

• cluster (string) –

  [REQUIRED]

  The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.

• service (string) –

  [REQUIRED]

  The short name or full Amazon Resource Name (ARN) of the service that the task sets exist in.

• taskSets (list) –

  The ID or full Amazon Resource Name (ARN) of task sets to describe.

  • (string) –

• include (list) –

  Specifies whether to see the resource tags for the task set. If TAGS is specified, the tags are included in the response. If this field is omitted, tags aren’t included in the response.

  • (string) –

Return type:

dict

Returns:

Response Syntax

{
    'taskSets': [
        {
            'id': 'string',
            'taskSetArn': 'string',
            'serviceArn': 'string',
            'clusterArn': 'string',
            'startedBy': 'string',
            'externalId': 'string',
            'status': 'string',
            'taskDefinition': 'string',
            'computedDesiredCount': 123,
            'pendingCount': 123,
            'runningCount': 123,
            'createdAt': datetime(2015, 1, 1),
            'updatedAt': datetime(2015, 1, 1),
            'launchType': 'EC2'|'FARGATE'|'EXTERNAL',
            'capacityProviderStrategy': [
                {
                    'capacityProvider': 'string',
                    'weight': 123,
                    'base': 123
                },
            ],
            'platformVersion': 'string',
            'platformFamily': 'string',
            'networkConfiguration': {
                'awsvpcConfiguration': {
                    'subnets': [
                        'string',
                    ],
                    'securityGroups': [
                        'string',
                    ],
                    'assignPublicIp': 'ENABLED'|'DISABLED'
                }
            },
            'loadBalancers': [
                {
                    'targetGroupArn': 'string',
                    'loadBalancerName': 'string',
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'serviceRegistries': [
                {
                    'registryArn': 'string',
                    'port': 123,
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'scale': {
                'value': 123.0,
                'unit': 'PERCENT'
            },
            'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
            'stabilityStatusAt': datetime(2015, 1, 1),
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ]
        },
    ],
    'failures': [
        {
            'arn': 'string',
            'reason': 'string',
            'detail': 'string'
        },
    ]
}

Response Structure

• (dict) –

  • taskSets (list) –

    The list of task sets described.

    • (dict) –

      Information about a set of Amazon ECS tasks in either an CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.

      • id (string) –

        The ID of the task set.

      • taskSetArn (string) –

        The Amazon Resource Name (ARN) of the task set.

      • serviceArn (string) –

        The Amazon Resource Name (ARN) of the service the task set exists in.

      • clusterArn (string) –

        The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.

      • startedBy (string) –

        The tag specified when a task set is started. If an CodeDeploy deployment created the task set, the startedBy parameter is CODE_DEPLOY. If an external deployment created the task set, the startedBy field isn’t used.

      • externalId (string) –

        The external ID associated with the task set.

        If an CodeDeploy deployment created a task set, the externalId parameter contains the CodeDeploy deployment ID.

        If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID Cloud Map attribute.

      • status (string) –

        The status of the task set. The following describes each state.

        PRIMARY

        The task set is serving production traffic.

        ACTIVE

        The task set isn’t serving production traffic.

        DRAINING

        The tasks in the task set are being stopped, and their corresponding targets are being deregistered from their target group.

      • taskDefinition (string) –

        The task definition that the task set is using.

      • computedDesiredCount (integer) –

        The computed desired count for the task set. This is calculated by multiplying the service’s desiredCount by the task set’s scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.

      • pendingCount (integer) –

        The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it’s restarted after being in the STOPPED state.

      • runningCount (integer) –

        The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.

      • createdAt (datetime) –

        The Unix timestamp for the time when the task set was created.

      • updatedAt (datetime) –

        The Unix timestamp for the time when the task set was last updated.

      • launchType (string) –

        The launch type the tasks in the task set are using. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

      • capacityProviderStrategy (list) –

        The capacity provider strategy that are associated with the task set.

        • (dict) –

          The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

          Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

          If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.

          To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

          A capacity provider strategy may contain a maximum of 6 capacity providers.

          • capacityProvider (string) –

            The short name of the capacity provider.

          • weight (integer) –

            The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

            If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail.

            An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that’s run using capacityProviderA, four tasks would use capacityProviderB.

          • base (integer) –

            The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

      • platformVersion (string) –

        The Fargate platform version where the tasks in the task set are running. A platform version is only specified for tasks run on Fargate. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

      • platformFamily (string) –

        The operating system that your tasks in the set are running on. A platform family is specified only for tasks that use the Fargate launch type.

        All tasks in the set must have the same value.

      • networkConfiguration (dict) –

        The network configuration for the task set.

        • awsvpcConfiguration (dict) –

          The VPC subnets and security groups that are associated with a task.

          Note

          All specified subnets and security groups must be from the same VPC.

          • subnets (list) –

            The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per AwsVpcConfiguration.

            Note

            All specified subnets must be from the same VPC.

            • (string) –

          • securityGroups (list) –

            The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per AwsVpcConfiguration.

            Note

            All specified security groups must be from the same VPC.

            • (string) –

          • assignPublicIp (string) –

            Whether the task’s elastic network interface receives a public IP address. The default value is DISABLED.

      • loadBalancers (list) –

        Details on a load balancer that are used with a task set.

        • (dict) –

          The load balancer configuration to use with a service or task set.

          When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.

          We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.

          A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide.

          • targetGroupArn (string) –

            The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.

            A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you’re using a Classic Load Balancer, omit the target group ARN.

            For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.

            For services using the CODE_DEPLOY deployment controller, you’re required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide.

            Warning

            If your service’s task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

          • loadBalancerName (string) –

            The name of the load balancer to associate with the Amazon ECS service or task set.

            A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.

          • containerName (string) –

            The name of the container (as it appears in a container definition) to associate with the load balancer.

          • containerPort (integer) –

            The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they’re launched on must allow ingress traffic on the hostPort of the port mapping.

      • serviceRegistries (list) –

        The details for the service discovery registries to assign to this task set. For more information, see Service discovery.

        • (dict) –

          The details for the service registry.

          Each service may be associated with one service registry. Multiple service registries for each service are not supported.

          When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.

          • registryArn (string) –

            The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService.

          • port (integer) –

            The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.

          • containerName (string) –

            The container name value to be used for your service discovery service. It’s already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

          • containerPort (integer) –

            The port value to be used for your service discovery service. It’s already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

      • scale (dict) –

        A floating-point percentage of your desired number of tasks to place and keep running in the task set.

        • value (float) –

          The value, specified as a percent total of a service’s desiredCount, to scale the task set. Accepted values are numbers between 0 and 100.

        • unit (string) –

          The unit of measure for the scale value.

      • stabilityStatus (string) –

        The stability status. This indicates whether the task set has reached a steady state. If the following conditions are met, the task set are in STEADY_STATE:

        • The task runningCount is equal to the computedDesiredCount.

        • The pendingCount is 0.

        • There are no tasks that are running on container instances in the DRAINING status.

        • All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.

        If any of those conditions aren’t met, the stability status returns STABILIZING.

      • stabilityStatusAt (datetime) –

        The Unix timestamp for the time when the task set stability status was retrieved.

      • tags (list) –

        The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.

        The following basic restrictions apply to tags:

        • Maximum number of tags per resource - 50

        • For each resource, each tag key must be unique, and each tag key can have only one value.

        • Maximum key length - 128 Unicode characters in UTF-8

        • Maximum value length - 256 Unicode characters in UTF-8

        • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

        • Tag keys and values are case-sensitive.

        • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

        • (dict) –

          The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

          The following basic restrictions apply to tags:

          • Maximum number of tags per resource - 50

          • For each resource, each tag key must be unique, and each tag key can have only one value.

          • Maximum key length - 128 Unicode characters in UTF-8

          • Maximum value length - 256 Unicode characters in UTF-8

          • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

          • Tag keys and values are case-sensitive.

          • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

          • key (string) –

            One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

          • value (string) –

            The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

  • failures (list) –

    Any failures associated with the call.

    • (dict) –

      A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide.

      • arn (string) –

        The Amazon Resource Name (ARN) of the failed resource.

      • reason (string) –

        The reason for the failure.

      • detail (string) –

        The details of the failure.

Exceptions

• ECS.Client.exceptions.ServerException

• ECS.Client.exceptions.ClientException

• ECS.Client.exceptions.InvalidParameterException

• ECS.Client.exceptions.ClusterNotFoundException

• ECS.Client.exceptions.UnsupportedFeatureException

• ECS.Client.exceptions.AccessDeniedException

• ECS.Client.exceptions.ServiceNotFoundException

• ECS.Client.exceptions.ServiceNotActiveException