ServiceResource / Action / create_dhcp_options

create_dhcp_options#

EC2.ServiceResource.create_dhcp_options(**kwargs)#

Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.

  • domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.

  • domain-name - If you’re using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you’re using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.

  • ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.

  • netbios-name-servers - The IP addresses of up to four NetBIOS name servers.

  • netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.

Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.

See also: AWS API Documentation

Request Syntax

dhcp_options = ec2.create_dhcp_options(
    DhcpConfigurations=[
        {
            'Key': 'string',
            'Values': [
                'string',
            ]
        },
    ],
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    DryRun=True|False
)
Parameters:

  • DhcpConfigurations (list) –

    [REQUIRED]

    A DHCP configuration option.

    • (dict) –

      • Key (string) –

      • Values (list) –

        • (string) –

  • TagSpecifications (list) –

    The tags to assign to the DHCP option.

    • (dict) –

      The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

      Note

      The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.

      • ResourceType (string) –

        The type of resource to tag on creation.

      • Tags (list) –

        The tags to apply to the resource.

        • (dict) –

          Describes a tag.

          • Key (string) –

            The key of the tag.

            Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.

          • Value (string) –

            The value of the tag.

            Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

  • DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Return type:

ec2.DhcpOptions

Returns:

DhcpOptions resource