ServiceResource / Action / create_volume

create_volume#

EC2.ServiceResource.create_volume(**kwargs)#

Creates an EBS volume that can be attached to an instance in the same Availability Zone.

You can create a new empty volume or restore a volume from an EBS snapshot. Any Amazon Web Services Marketplace product codes from the snapshot are propagated to the volume.

You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.

You can tag your volumes during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.

For more information, see Create an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.

See also: AWS API Documentation

Request Syntax

volume = ec2.create_volume(
    AvailabilityZone='string',
    Encrypted=True|False,
    Iops=123,
    KmsKeyId='string',
    OutpostArn='string',
    Size=123,
    SnapshotId='string',
    VolumeType='standard'|'io1'|'io2'|'gp2'|'sc1'|'st1'|'gp3',
    DryRun=True|False,
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    MultiAttachEnabled=True|False,
    Throughput=123,
    ClientToken='string'
)
Parameters:
  • AvailabilityZone (string) –

    [REQUIRED]

    The Availability Zone in which to create the volume.

  • Encrypted (boolean) –

    Indicates whether the volume should be encrypted. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Encryption by default in the Amazon Elastic Compute Cloud User Guide.

    Encrypted Amazon EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types.

  • Iops (integer) –

    The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

    The following are the supported values for each volume type:

    • gp3: 3,000-16,000 IOPS

    • io1: 100-64,000 IOPS

    • io2: 100-64,000 IOPS

    io1 and io2 volumes support up to 64,000 IOPS only on Instances built on the Nitro System. Other instance families support performance up to 32,000 IOPS.

    This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.

  • KmsKeyId (string) –

    The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.

    You can specify the KMS key using any of the following:

    • Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

    • Key alias. For example, alias/ExampleAlias.

    • Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.

    • Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.

    Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.

  • OutpostArn (string) – The Amazon Resource Name (ARN) of the Outpost.

  • Size (integer) –

    The size of the volume, in GiBs. You must specify either a snapshot ID or a volume size. If you specify a snapshot, the default is the snapshot size. You can specify a volume size that is equal to or larger than the snapshot size.

    The following are the supported volumes sizes for each volume type:

    • gp2 and gp3: 1-16,384

    • io1 and io2: 4-16,384

    • st1 and sc1: 125-16,384

    • standard: 1-1,024

  • SnapshotId (string) – The snapshot from which to create the volume. You must specify either a snapshot ID or a volume size.

  • VolumeType (string) –

    The volume type. This parameter can be one of the following values:

    • General Purpose SSD: gp2 | gp3

    • Provisioned IOPS SSD: io1 | io2

    • Throughput Optimized HDD: st1

    • Cold HDD: sc1

    • Magnetic: standard

    Warning

    Throughput Optimized HDD ( st1) and Cold HDD ( sc1) volumes can’t be used as boot volumes.

    For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide.

    Default: gp2

  • DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

  • TagSpecifications (list) –

    The tags to apply to the volume during creation.

    • (dict) –

      The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

      Note

      The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.

      • ResourceType (string) –

        The type of resource to tag on creation.

      • Tags (list) –

        The tags to apply to the resource.

        • (dict) –

          Describes a tag.

          • Key (string) –

            The key of the tag.

            Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.

          • Value (string) –

            The value of the tag.

            Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

  • MultiAttachEnabled (boolean) – Indicates whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 Instances built on the Nitro System in the same Availability Zone. This parameter is supported with io1 and io2 volumes only. For more information, see Amazon EBS Multi-Attach in the Amazon Elastic Compute Cloud User Guide.

  • Throughput (integer) –

    The throughput to provision for a volume, with a maximum of 1,000 MiB/s.

    This parameter is valid only for gp3 volumes.

    Valid Range: Minimum value of 125. Maximum value of 1000.

  • ClientToken (string) –

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensure Idempotency.

    This field is autopopulated if not provided.

Return type:

ec2.Volume

Returns:

Volume resource