update_integration

update_integration(**kwargs)

Represents an update integration.

See also: AWS API Documentation

Request Syntax

response = client.update_integration(
    restApiId='string',
    resourceId='string',
    httpMethod='string',
    patchOperations=[
        {
            'op': 'add'|'remove'|'replace'|'move'|'copy'|'test',
            'path': 'string',
            'value': 'string',
            'from': 'string'
        },
    ]
)
Parameters
  • restApiId (string) --

    [REQUIRED]

    The string identifier of the associated RestApi.

  • resourceId (string) --

    [REQUIRED]

    Represents an update integration request's resource identifier.

  • httpMethod (string) --

    [REQUIRED]

    Represents an update integration request's HTTP method.

  • patchOperations (list) --

    For more information about supported patch operations, see Patch Operations.

    • (dict) --

      For more information about supported patch operations, see Patch Operations.

      • op (string) --

        An update operation to be performed with this PATCH request. The valid value can be add, remove, replace or copy. Not all valid operations are supported for a given resource. Support of the operations depends on specific operational contexts. Attempts to apply an unsupported operation on a resource will return an error message..

      • path (string) --

        The op operation's target, as identified by a JSON Pointer value that references a location within the targeted resource. For example, if the target resource has an updateable property of {"name":"value"}, the path for this property is /name. If the name property value is a JSON object (e.g., {"name": {"child/name": "child-value"}}), the path for the child/name property will be /name/child~1name. Any slash ("/") character appearing in path names must be escaped with "~1", as shown in the example above. Each op operation can have only one path associated with it.

      • value (string) --

        The new target value of the update operation. It is applicable for the add or replace operation. When using AWS CLI to update a property of a JSON value, enclose the JSON object with a pair of single quotes in a Linux shell, e.g., '{"a": ...}'.

      • from (string) --

        The copy update operation's source as identified by a JSON-Pointer value referencing the location within the targeted resource to copy the value from. For example, to promote a canary deployment, you copy the canary deployment ID to the affiliated deployment ID by calling a PATCH request on a Stage resource with "op":"copy", "from":"/canarySettings/deploymentId" and "path":"/deploymentId".

Return type

dict

Returns

Response Syntax

{
    'type': 'HTTP'|'AWS'|'MOCK'|'HTTP_PROXY'|'AWS_PROXY',
    'httpMethod': 'string',
    'uri': 'string',
    'connectionType': 'INTERNET'|'VPC_LINK',
    'connectionId': 'string',
    'credentials': 'string',
    'requestParameters': {
        'string': 'string'
    },
    'requestTemplates': {
        'string': 'string'
    },
    'passthroughBehavior': 'string',
    'contentHandling': 'CONVERT_TO_BINARY'|'CONVERT_TO_TEXT',
    'timeoutInMillis': 123,
    'cacheNamespace': 'string',
    'cacheKeyParameters': [
        'string',
    ],
    'integrationResponses': {
        'string': {
            'statusCode': 'string',
            'selectionPattern': 'string',
            'responseParameters': {
                'string': 'string'
            },
            'responseTemplates': {
                'string': 'string'
            },
            'contentHandling': 'CONVERT_TO_BINARY'|'CONVERT_TO_TEXT'
        }
    },
    'tlsConfig': {
        'insecureSkipVerification': True|False
    }
}

Response Structure

  • (dict) --

    Represents an HTTP, HTTP_PROXY, AWS, AWS_PROXY, or Mock integration.

    • type (string) --

      Specifies an API method integration type. The valid value is one of the following:

      For the HTTP and HTTP proxy integrations, each integration can specify a protocol ( http/https ), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

    • httpMethod (string) --

      Specifies the integration's HTTP method type.

    • uri (string) --

      Specifies Uniform Resource Identifier (URI) of the integration endpoint.

      For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where connectionType is not VPC_LINK , or private integration, where connectionType is VPC_LINK . For a private HTTP integration, the URI is not used for routing. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api} . Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

    • connectionType (string) --

      The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET .

    • connectionId (string) --

      The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

    • credentials (string) --

      Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\* . To use resource-based permissions on supported AWS services, specify null.

    • requestParameters (dict) --

      A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name} , where location is querystring , path , or header and name must be a valid and unique method request parameter name.

      • (string) --
        • (string) --
    • requestTemplates (dict) --

      Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

      • (string) --
        • (string) --
    • passthroughBehavior (string) --

      Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates . The valid value is one of the following: WHEN_NO_MATCH : passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES : passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER : rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

    • contentHandling (string) --

      Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT , with the following behaviors:

      If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

    • timeoutInMillis (integer) --

      Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.

    • cacheNamespace (string) --

      Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace . You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

    • cacheKeyParameters (list) --

      A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters , these parameters must also be specified for Method requestParameters .

      • (string) --
    • integrationResponses (dict) --

      Specifies the integration's responses.

      • (string) --

        • (dict) --

          Represents an integration response. The status code must map to an existing MethodResponse, and parameters and templates can be used to transform the back-end response.

          • statusCode (string) --

            Specifies the status code that is used to map the integration response to an existing MethodResponse.

          • selectionPattern (string) --

            Specifies the regular expression (regex) pattern used to choose an integration response based on the response from the back end. For example, if the success response returns nothing and the error response returns some string, you could use the .+ regex to match error response. However, make sure that the error response does not contain any newline ( \n ) character in such cases. If the back end is an AWS Lambda function, the AWS Lambda function error header is matched. For all other HTTP and AWS back ends, the HTTP status code is matched.

          • responseParameters (dict) --

            A key-value map specifying response parameters that are passed to the method response from the back end. The key is a method response header parameter name and the mapped value is an integration response header value, a static value enclosed within a pair of single quotes, or a JSON expression from the integration response body. The mapping key must match the pattern of method.response.header.{name} , where name is a valid and unique header name. The mapped non-static value must match the pattern of integration.response.header.{name} or integration.response.body.{JSON-expression} , where name is a valid and unique response header name and JSON-expression is a valid JSON expression without the $ prefix.

            • (string) --
              • (string) --
          • responseTemplates (dict) --

            Specifies the templates used to transform the integration response body. Response templates are represented as a key/value map, with a content-type as the key and a template as the value.

            • (string) --
              • (string) --
          • contentHandling (string) --

            Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT , with the following behaviors:

            If this property is not defined, the response payload will be passed through from the integration response to the method response without modification.

    • tlsConfig (dict) --

      Specifies the TLS configuration for an integration.

      • insecureSkipVerification (boolean) --

        Specifies whether or not API Gateway skips verification that the certificate for an integration endpoint is issued by a supported certificate authority. This isn’t recommended, but it enables you to use certificates that are signed by private certificate authorities, or certificates that are self-signed. If enabled, API Gateway still performs basic certificate validation, which includes checking the certificate's expiration date, hostname, and presence of a root certificate authority. Supported only for HTTP and HTTP_PROXY integrations.

        Warning

        Enabling insecureSkipVerification isn't recommended, especially for integrations with public HTTPS endpoints. If you enable insecureSkipVerification , you increase the risk of man-in-the-middle attacks.

Exceptions

  • APIGateway.Client.exceptions.BadRequestException
  • APIGateway.Client.exceptions.ConflictException
  • APIGateway.Client.exceptions.LimitExceededException
  • APIGateway.Client.exceptions.NotFoundException
  • APIGateway.Client.exceptions.UnauthorizedException
  • APIGateway.Client.exceptions.TooManyRequestsException