copy_snapshot

copy_snapshot(**kwargs)

Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.

You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs).

When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default Key Management Service (KMS) KMS key; however, you can specify a different KMS key. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the KMS key used to encrypt the snapshot.

Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId . Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide .

Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose.

For more information, see Copy an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide .

See also: AWS API Documentation

Request Syntax

response = client.copy_snapshot(
    Description='string',
    DestinationOutpostArn='string',
    Encrypted=True|False,
    KmsKeyId='string',
    SourceRegion='string',
    SourceSnapshotId='string',
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    DryRun=True|False
)
Parameters
  • Description (string) -- A description for the EBS snapshot.
  • DestinationOutpostArn (string) --

    The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an Amazon Web Services Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.

    For more information, see Copy snapshots from an Amazon Web Services Region to an Outpost in the Amazon Elastic Compute Cloud User Guide .

  • DestinationRegion (string) --

    The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required.

    The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com ). With the CLI, this is specified using the --region parameter or the default Region in your Amazon Web Services configuration file.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
  • Encrypted (boolean) -- To encrypt a copy of an unencrypted snapshot if encryption by default is not enabled, enable encryption using this parameter. Otherwise, omit this parameter. Encrypted snapshots are encrypted, even if you omit this parameter and encryption by default is not enabled. You cannot set this parameter to false. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide .
  • KmsKeyId (string) --

    The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true .

    You can specify the KMS key using any of the following:

    • Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
    • Key alias. For example, alias/ExampleAlias.
    • Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
    • Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.

    Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.

  • PresignedUrl (string) --

    When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests.

    The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion , SourceSnapshotId , and DestinationRegion parameters. The PresignedUrl must be signed using Amazon Web Services Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) in the Amazon Simple Storage Service API Reference . An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
  • SourceRegion (string) --

    [REQUIRED]

    The ID of the Region that contains the snapshot to be copied.

  • SourceSnapshotId (string) --

    [REQUIRED]

    The ID of the EBS snapshot to copy.

  • TagSpecifications (list) --

    The tags to apply to the new snapshot.

    • (dict) --

      The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

      Note

      The Valid Values lists all the resource types that can be tagged. However, the action you're using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you're using, you'll get an error.

      • ResourceType (string) --

        The type of resource to tag on creation.

      • Tags (list) --

        The tags to apply to the resource.

        • (dict) --

          Describes a tag.

          • Key (string) --

            The key of the tag.

            Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

          • Value (string) --

            The value of the tag.

            Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

  • DryRun (boolean) -- Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .
Return type

dict

Returns

Response Syntax

{
    'SnapshotId': 'string',
    'Tags': [
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
}

Response Structure

  • (dict) --

    • SnapshotId (string) --

      The ID of the new snapshot.

    • Tags (list) --

      Any tags applied to the new snapshot.

      • (dict) --

        Describes a tag.

        • Key (string) --

          The key of the tag.

          Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

        • Value (string) --

          The value of the tag.

          Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

Examples

This example copies a snapshot with the snapshot ID of snap-066877671789bd71b from the us-west-2 region to the us-east-1 region and adds a short description to identify the snapshot.

response = client.copy_snapshot(
    Description='This is my copied snapshot.',
    DestinationRegion='us-east-1',
    SourceRegion='us-west-2',
    SourceSnapshotId='snap-066877671789bd71b',
)

print(response)

Expected Output:

{
    'SnapshotId': 'snap-066877671789bd71b',
    'ResponseMetadata': {
        '...': '...',
    },
}