get_savings_plans_coverage¶

get_savings_plans_coverage(**kwargs)¶

Retrieves the Savings Plans covered for your account. This enables you to see how much of your cost is covered by a Savings Plan. An organization’s management account can see the coverage of the associated member accounts. This supports dimensions, Cost Categories, and nested expressions. For any time period, you can filter data for Savings Plans usage with the following dimensions:

LINKED_ACCOUNT
REGION
SERVICE
INSTANCE_FAMILY

To determine valid values for a dimension, use the GetDimensionValues operation.

See also: AWS API Documentation

Request Syntax

response = client.get_savings_plans_coverage(
    TimePeriod={
        'Start': 'string',
        'End': 'string'
    },
    GroupBy=[
        {
            'Type': 'DIMENSION'|'TAG'|'COST_CATEGORY',
            'Key': 'string'
        },
    ],
    Granularity='DAILY'|'MONTHLY'|'HOURLY',
    Filter={
        'Or': [
            {'... recursive ...'},
        ],
        'And': [
            {'... recursive ...'},
        ],
        'Not': {'... recursive ...'},
        'Dimensions': {
            'Key': 'AZ'|'INSTANCE_TYPE'|'LINKED_ACCOUNT'|'LINKED_ACCOUNT_NAME'|'OPERATION'|'PURCHASE_TYPE'|'REGION'|'SERVICE'|'SERVICE_CODE'|'USAGE_TYPE'|'USAGE_TYPE_GROUP'|'RECORD_TYPE'|'OPERATING_SYSTEM'|'TENANCY'|'SCOPE'|'PLATFORM'|'SUBSCRIPTION_ID'|'LEGAL_ENTITY_NAME'|'DEPLOYMENT_OPTION'|'DATABASE_ENGINE'|'CACHE_ENGINE'|'INSTANCE_TYPE_FAMILY'|'BILLING_ENTITY'|'RESERVATION_ID'|'RESOURCE_ID'|'RIGHTSIZING_TYPE'|'SAVINGS_PLANS_TYPE'|'SAVINGS_PLAN_ARN'|'PAYMENT_OPTION'|'AGREEMENT_END_DATE_TIME_AFTER'|'AGREEMENT_END_DATE_TIME_BEFORE'|'INVOICING_ENTITY'|'ANOMALY_TOTAL_IMPACT_ABSOLUTE'|'ANOMALY_TOTAL_IMPACT_PERCENTAGE',
            'Values': [
                'string',
            ],
            'MatchOptions': [
                'EQUALS'|'ABSENT'|'STARTS_WITH'|'ENDS_WITH'|'CONTAINS'|'CASE_SENSITIVE'|'CASE_INSENSITIVE'|'GREATER_THAN_OR_EQUAL',
            ]
        },
        'Tags': {
            'Key': 'string',
            'Values': [
                'string',
            ],
            'MatchOptions': [
                'EQUALS'|'ABSENT'|'STARTS_WITH'|'ENDS_WITH'|'CONTAINS'|'CASE_SENSITIVE'|'CASE_INSENSITIVE'|'GREATER_THAN_OR_EQUAL',
            ]
        },
        'CostCategories': {
            'Key': 'string',
            'Values': [
                'string',
            ],
            'MatchOptions': [
                'EQUALS'|'ABSENT'|'STARTS_WITH'|'ENDS_WITH'|'CONTAINS'|'CASE_SENSITIVE'|'CASE_INSENSITIVE'|'GREATER_THAN_OR_EQUAL',
            ]
        }
    },
    Metrics=[
        'string',
    ],
    NextToken='string',
    MaxResults=123,
    SortBy={
        'Key': 'string',
        'SortOrder': 'ASCENDING'|'DESCENDING'
    }
)

Parameters

TimePeriod (dict) --
[REQUIRED]

The time period that you want the usage and costs for. The Start date must be within 13 months. The End date must be after the Start date, and before the current date. Future dates can't be used as an End date.
- Start (string) -- [REQUIRED]
  The beginning of the time period. The start date is inclusive. For example, if start is 2017-01-01 , Amazon Web Services retrieves cost and usage data starting at 2017-01-01 up to the end date. The start date must be equal to or no later than the current date to avoid a validation error.
- End (string) -- [REQUIRED]
  The end of the time period. The end date is exclusive. For example, if end is 2017-05-01 , Amazon Web Services retrieves cost and usage data from the start date up to, but not including, 2017-05-01 .
GroupBy (list) --
You can group the data using the attributes INSTANCE_FAMILY , REGION , or SERVICE .
- (dict) --
  Represents a group when you specify a group by criteria or in the response to a query with a specific grouping.
  - Type (string) --
    The string that represents the type of group.
  - Key (string) --
    The string that represents a key for a specified group.
Granularity (string) --
The granularity of the Amazon Web Services cost data for your Savings Plans. Granularity can't be set if GroupBy is set.

The GetSavingsPlansCoverage operation supports only DAILY and MONTHLY granularities.
Filter (dict) --
Filters Savings Plans coverage data by dimensions. You can filter data for Savings Plans usage with the following dimensions:
- LINKED_ACCOUNT
- REGION
- SERVICE
- INSTANCE_FAMILY
GetSavingsPlansCoverage uses the same Expression object as the other operations, but only AND is supported among each dimension. If there are multiple values for a dimension, they are OR'd together.

Cost category is also supported.
- Or (list) --
  Return results that match either Dimension object.
  - (dict) --
    Use Expression to filter in various Cost Explorer APIs.
    
    Not all Expression types are supported in each API. Refer to the documentation for each specific API to see what is supported.
    
    There are two patterns:
    - Simple dimension values.
      - There are three types of simple dimension values: CostCategories , Tags , and Dimensions .
        
        Specify the CostCategories field to define a filter that acts on Cost Categories.
        
        Specify the Tags field to define a filter that acts on Cost Allocation Tags.
        
        Specify the Dimensions field to define a filter that acts on the DimensionValues.
      - For each filter type, you can set the dimension name and values for the filters that you plan to use.
        
        For example, you can filter for REGION==us-east-1 OR REGION==us-west-1 . For GetRightsizingRecommendation , the Region is a full name (for example, REGION==US East (N. Virginia) .
        
        The corresponding Expression for this example is as follows: { "Dimensions": { "Key": "REGION", "Values": [ "us-east-1", “us-west-1” ] } }
        
        As shown in the previous example, lists of dimension values are combined with OR when applying the filter.
      - You can also set different match options to further control how the filter behaves. Not all APIs support match options. Refer to the documentation for each specific API to see what is supported.
        
        For example, you can filter for linked account names that start with “a”.
        
        The corresponding Expression for this example is as follows: { "Dimensions": { "Key": "LINKED_ACCOUNT_NAME", "MatchOptions": [ "STARTS_WITH" ], "Values": [ "a" ] } }
    - Compound Expression types with logical operations.
      - You can use multiple Expression types and the logical operators AND/OR/NOT to create a list of one or more Expression objects. By doing this, you can filter by more advanced options.
      - For example, you can filter by ((REGION == us-east-1 OR REGION == us-west-1) OR (TAG.Type == Type1)) AND (USAGE_TYPE != DataTransfer) .
      - The corresponding Expression for this example is as follows: { "And": [ {"Or": [ {"Dimensions": { "Key": "REGION", "Values": [ "us-east-1", "us-west-1" ] }}, {"Tags": { "Key": "TagName", "Values": ["Value1"] } } ]}, {"Not": {"Dimensions": { "Key": "USAGE_TYPE", "Values": ["DataTransfer"] }}} ] }
    Note
    
    Because each Expression can have only one operator, the service returns an error if more than one is specified. The following example shows an Expression object that creates an error: { "And": [ ... ], "Dimensions": { "Key": "USAGE_TYPE", "Values": [ "DataTransfer" ] } }
    
    The following is an example of the corresponding error message: "Expression has more than one roots. Only one root operator is allowed for each expression: And, Or, Not, Dimensions, Tags, CostCategories"
    
    Note
    
    For the GetRightsizingRecommendation action, a combination of OR and NOT isn't supported. OR isn't supported between different dimensions, or dimensions and tags. NOT operators aren't supported. Dimensions are also limited to LINKED_ACCOUNT , REGION , or RIGHTSIZING_TYPE .
    
    For the GetReservationPurchaseRecommendation action, only NOT is supported. AND and OR aren't supported. Dimensions are limited to LINKED_ACCOUNT .
- And (list) --
  Return results that match both Dimension objects.
  - (dict) --
    Use Expression to filter in various Cost Explorer APIs.
    
    Not all Expression types are supported in each API. Refer to the documentation for each specific API to see what is supported.
    
    There are two patterns:
    - Simple dimension values.
      - There are three types of simple dimension values: CostCategories , Tags , and Dimensions .
        
        Specify the CostCategories field to define a filter that acts on Cost Categories.
        
        Specify the Tags field to define a filter that acts on Cost Allocation Tags.
        
        Specify the Dimensions field to define a filter that acts on the DimensionValues.
      - For each filter type, you can set the dimension name and values for the filters that you plan to use.
        
        For example, you can filter for REGION==us-east-1 OR REGION==us-west-1 . For GetRightsizingRecommendation , the Region is a full name (for example, REGION==US East (N. Virginia) .
        
        The corresponding Expression for this example is as follows: { "Dimensions": { "Key": "REGION", "Values": [ "us-east-1", “us-west-1” ] } }
        
        As shown in the previous example, lists of dimension values are combined with OR when applying the filter.
      - You can also set different match options to further control how the filter behaves. Not all APIs support match options. Refer to the documentation for each specific API to see what is supported.
        
        For example, you can filter for linked account names that start with “a”.
        
        The corresponding Expression for this example is as follows: { "Dimensions": { "Key": "LINKED_ACCOUNT_NAME", "MatchOptions": [ "STARTS_WITH" ], "Values": [ "a" ] } }
    - Compound Expression types with logical operations.
      - You can use multiple Expression types and the logical operators AND/OR/NOT to create a list of one or more Expression objects. By doing this, you can filter by more advanced options.
      - For example, you can filter by ((REGION == us-east-1 OR REGION == us-west-1) OR (TAG.Type == Type1)) AND (USAGE_TYPE != DataTransfer) .
      - The corresponding Expression for this example is as follows: { "And": [ {"Or": [ {"Dimensions": { "Key": "REGION", "Values": [ "us-east-1", "us-west-1" ] }}, {"Tags": { "Key": "TagName", "Values": ["Value1"] } } ]}, {"Not": {"Dimensions": { "Key": "USAGE_TYPE", "Values": ["DataTransfer"] }}} ] }
    Note
    
    Because each Expression can have only one operator, the service returns an error if more than one is specified. The following example shows an Expression object that creates an error: { "And": [ ... ], "Dimensions": { "Key": "USAGE_TYPE", "Values": [ "DataTransfer" ] } }
    
    The following is an example of the corresponding error message: "Expression has more than one roots. Only one root operator is allowed for each expression: And, Or, Not, Dimensions, Tags, CostCategories"
    
    Note
    
    For the GetRightsizingRecommendation action, a combination of OR and NOT isn't supported. OR isn't supported between different dimensions, or dimensions and tags. NOT operators aren't supported. Dimensions are also limited to LINKED_ACCOUNT , REGION , or RIGHTSIZING_TYPE .
    
    For the GetReservationPurchaseRecommendation action, only NOT is supported. AND and OR aren't supported. Dimensions are limited to LINKED_ACCOUNT .
- Not (dict) --
  Return results that don't match a Dimension object.
- Dimensions (dict) --
  The specific Dimension to use for Expression .
  - Key (string) --
    The names of the metadata types that you can use to filter and group your results. For example, AZ returns a list of Availability Zones.
    
    Not all dimensions are supported in each API. Refer to the documentation for each specific API to see what is supported.
    
    LINK_ACCOUNT_NAME and SERVICE_CODE can only be used in CostCategoryRule.
    ANOMALY_TOTAL_IMPACT_ABSOLUTE and ANOMALY_TOTAL_IMPACT_PERCENTAGE can only be used in AnomalySubscriptions.
  - Values (list) --
    The metadata values that you can use to filter and group your results. You can use GetDimensionValues to find specific values.
    - (string) --
  - MatchOptions (list) --
    The match options that you can use to filter your results.
    
    MatchOptions is only applicable for actions related to Cost Category and Anomaly Subscriptions. Refer to the documentation for each specific API to see what is supported.
    
    The default values for MatchOptions are EQUALS and CASE_SENSITIVE .
    - (string) --
- Tags (dict) --
  The specific Tag to use for Expression .
  - Key (string) --
    The key for the tag.
  - Values (list) --
    The specific value of the tag.
    - (string) --
  - MatchOptions (list) --
    The match options that you can use to filter your results. MatchOptions is only applicable for actions related to Cost Category. The default values for MatchOptions are EQUALS and CASE_SENSITIVE .
    - (string) --
- CostCategories (dict) --
  The filter that's based on CostCategory values.
  - Key (string) --
    The unique name of the Cost Category.
  - Values (list) --
    The specific value of the Cost Category.
    - (string) --
  - MatchOptions (list) --
    The match options that you can use to filter your results. MatchOptions is only applicable for actions related to cost category. The default values for MatchOptions is EQUALS and CASE_SENSITIVE .
    - (string) --
Metrics (list) --
The measurement that you want your Savings Plans coverage reported in. The only valid value is SpendCoveredBySavingsPlans .
- (string) --
NextToken (string) -- The token to retrieve the next set of results. Amazon Web Services provides the token when the response from a previous call has more results than the maximum page size.
MaxResults (integer) -- The number of items to be returned in a response. The default is 20 , with a minimum value of 1 .
SortBy (dict) --
The value that you want to sort the data by.

The following values are supported for Key :
- SpendCoveredBySavingsPlan
- OnDemandCost
- CoveragePercentage
- TotalCost
- InstanceFamily
- Region
- Service
The supported values for SortOrder are ASCENDING and DESCENDING .
- Key (string) -- [REQUIRED]
  The key that's used to sort the data.
- SortOrder (string) --
  The order that's used to sort the data.

Return type

dict

Returns

Response Syntax

{
    'SavingsPlansCoverages': [
        {
            'Attributes': {
                'string': 'string'
            },
            'Coverage': {
                'SpendCoveredBySavingsPlans': 'string',
                'OnDemandCost': 'string',
                'TotalCost': 'string',
                'CoveragePercentage': 'string'
            },
            'TimePeriod': {
                'Start': 'string',
                'End': 'string'
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

(dict) --
- SavingsPlansCoverages (list) --
  
  The amount of spend that your Savings Plans covered.
  - (dict) --
    
    The amount of Savings Plans eligible usage that's covered by Savings Plans. All calculations consider the On-Demand equivalent of your Savings Plans usage.
    - Attributes (dict) --
      
      The attribute that applies to a specific Dimension .
      - (string) --
        
        (string) --
    - Coverage (dict) --
      
      The amount of Savings Plans eligible usage that the Savings Plans covered.
      - SpendCoveredBySavingsPlans (string) --
        
        The amount of your Amazon Web Services usage that's covered by a Savings Plans.
      - OnDemandCost (string) --
        
        The cost of your Amazon Web Services usage at the public On-Demand rate.
      - TotalCost (string) --
        
        The total cost of your Amazon Web Services usage, regardless of your purchase option.
      - CoveragePercentage (string) --
        
        The percentage of your existing Savings Plans covered usage, divided by all of your eligible Savings Plans usage in an account (or set of accounts).
    - TimePeriod (dict) --
      
      The time period of the request.
      - Start (string) --
        
        The beginning of the time period. The start date is inclusive. For example, if start is 2017-01-01 , Amazon Web Services retrieves cost and usage data starting at 2017-01-01 up to the end date. The start date must be equal to or no later than the current date to avoid a validation error.
      - End (string) --
        
        The end of the time period. The end date is exclusive. For example, if end is 2017-05-01 , Amazon Web Services retrieves cost and usage data from the start date up to, but not including, 2017-05-01 .
- NextToken (string) --
  
  The token to retrieve the next set of results. Amazon Web Services provides the token when the response from a previous call has more results than the maximum page size.

Exceptions

CostExplorer.Client.exceptions.LimitExceededException
CostExplorer.Client.exceptions.DataUnavailableException
CostExplorer.Client.exceptions.InvalidNextTokenException

Table Of Contents

get_savings_plans_coverage¶